Textile Design PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

[email protected].

my

6. Textile Design
Candidates can submit work in any of the media outlined below for any of the
four components.
Candidates should demonstrate an expressive, decorative or functional
response through the use of fabrics, dyes and fibres. Within this area,
candidates should be encouraged to explore a range of techniques, where
available, such as traditional or new media or a combination of both.
Candidates should develop their own designs and realise their finished work to
a high standard. They may produce work in one area but should show
knowledge of other areas. They need not produce garments, but function and
suitability of design should be considered.
Supporting portfolios may contain sketches, designs, samples and
photographs. There should be an awareness of culture and historical factors
appropriate to their chosen area.
Within this area, candidates may produce work in any of the following
specialisms:
Printed and/or Dyed
Candidates should be aware of the variety of different media, such as
commercial fabric paints, fabric painting inks and application methods. For the
printed application, candidates are expected to show a range of techniques for
transferring image to fabric, such as block, screen and discharge printing.
Dyed application requires the candidate to be familiar with a range of
processes such as batik, silk painting and tie and dye. Candidates should also
be familiar with dipping and spraying.
Constructed
Candidates should demonstrate an understanding of either natural and/or
synthetic yarns, and how they can be used through stitching, knotting and
looping. Candidates could use experimentation with alternative media such as
plastic, paper and wire, and investigate the properties of these techniques such
as folding, cutting and fusing. Candidates could show a variety of constructed
techniques such as embroidery, weaving or appliqu.

[email protected]

[email protected]

Fashion
Candidates should demonstrate how fabric and fibres are used in a fashion
context. Candidates should be familiar with a range of processes such as
garment construction, accessories, and fashion design and body adornment.
Candidates do not have to produce final made garments but should be mindful
of the techniques appropriate to this specialism.

[email protected]

You might also like