Scribd
Upload
450 views

Intel Interview Questions

This document contains a large list of 101 interview questions for Intel related to digital circuit design, CMOS logic design, VHDL/Verilog, processor design, memory design, I/O design, process technology, transistor-level design tools, and silicon evaluation. The questions cover topics such as the working of basic gates, latches and flip-flops, SRAM and DRAM cells, adders, counters, state machines, pipelining, caches, finite state machines, signal integrity issues, C/C++ programming experience, VHDL/Verilog concepts, memory and I/O designs, process technologies, design tools, and experience bringing products to volume production.

Uploaded by

Ruchi Gujarathi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
450 views

Intel Interview Questions

This document contains a large list of 101 interview questions for Intel related to digital circuit design, CMOS logic design, VHDL/Verilog, processor design, memory design, I/O design, process technology, transistor-level design tools, and silicon evaluation. The questions cover topics such as the working of basic gates, latches and flip-flops, SRAM and DRAM cells, adders, counters, state machines, pipelining, caches, finite state machines, signal integrity issues, C/C++ programming experience, VHDL/Verilog concepts, memory and I/O designs, process technologies, design tools, and experience bringing products to volume production.

Uploaded by

Ruchi Gujarathi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Large list of Intel interview questions

By admin | July 26, 2005

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.

Insights of an inverter. Explain the working?


Insights of a 2 input NOR gate. Explain the working?
Insights of a 2 input NAND gate. Explain the working?
Implement F= not (AB+CD) using CMOS gates?
Insights of a pass gate. Explain the working?
Why do we need both PMOS and NMOS transistors to implement a pass gate?
What does the above code synthesize to?
Cross section of a PMOS transistor?
Cross section of an NMOS transistor?
What is a D-latch? Write the VHDL Code for it?
Differences between D-Latch and D flip-flop?
Implement D flip-flop with a couple of latches? Write a VHDL Code for a D flip-flop?
What is latchup? Explain the methods used to prevent it?
What is charge sharing?
While using logic design, explain the various steps that r followed to obtain the desirable design in a well
defined manner?
Why is OOPS called OOPS? (C++)
What is a linked list? Explain the 2 fields in a linked list?
Implement a 2 I/P and gate using Tran gates?
Insights of a 4bit adder/Sub Circuit?
For f = AB+CD if B is S-a-1, what r the test vectors needed to detect the fault?
Explain various adders and diff between them?
Explain the working of 4-bit Up/down Counter?
A circuit has 1 input X and 2 outputs A and B. If X = HIGH for 4 clock ticks, A = 1. If X = LOW for 4 clock
ticks, B = 1. Draw a state diagram for this Spec?
Advantages and disadvantages of Mealy and Moore?
Id vs. Vds Characteristics of NMOS and PMOS transistors?
Explain the operation of a 6T-SRAM cell?
Differences between DRAM and SRAM?
Implement a function with both ratioed and domino logic and merits and demerits of each logic?
Given a circuit and asked to tell the output voltages of that circuit?
How can you construct both PMOS and NMOS on a single substrate?
What happens when the gate oxide is very thin?
What is setup time and hold time?
Write a pseudo code for sorting the numbers in an array?
What is pipelining and how can we increase throughput using pipelining?
Explain about stuck at fault models, scan design, BIST and IDDQ testing?
What is SPICE?
Differences between IRSIM and SPICE?
Differences between netlist of HSPICE and Spectre?
What is FPGA?
Draw the Cross Section of an Inverter? Clearly show all the connections between M1 and poly, M1 and
diffusion layers etc?
Draw the Layout of an Inverter?

42. If the current thru the poly is 20nA and the contact can take a max current of 10nA how would u overcome
the problem?
43. Implement F = AB+C using CMOS gates?
44. Working of a 2-stage OPAMP?
45. 6-T XOR gate?
46. Differences between blocking and Non-blocking statements in Verilog?
47. Differences between Signals and Variables in VHDL? If the same code is written using Signals and Variables
what does it synthesize to?
48. Differences between functions and Procedures in VHDL?
49. What is component binding?
50. What is polymorphism? (C++)
51. What is hot electron effect?
52. Define threshold voltage?
53. Factors affecting Power Consumption on a chip?
54. Explain Clock Skew?
55. Why do we use a Clock tree?
56. Explain the various Capacitances associated with a transistor and which one of them is the most prominent?
57. Explain the Various steps in Synthesis?
58. Explain ASIC Design Flow?
59. Explain Custom Design Flow?
60. Why is Extraction performed?
61. What is LVS, DRC?
62. Who provides the DRC rules?
63. What is validation?
64. What is Cross Talk?
65. Different ways of implementing a comparator?
66. What r the phenomenon which come into play when the devices are scaled to the sub-micron lengths?
67. What is clock feed through?
68. Implement an Inverter using a single transistor?
69. What is Fowler-Nordheim Tunneling?
70. Insights of a Tri-state inverter?
71. If an/ap = 0.5, an/ap = 1, an/ap = 3, for 3 inverters draw the transfer characteristics?
72. Differences between Array and Booth Multipliers?
73. Explain the concept of a Clock Divider Circuit? Write a VHDL code for the same?
74. Which gate is normally preferred while implementing circuits using CMOS logic, NAND or NOR? Why?
75. Insights of a Tri-State Inverter?
76. Basic Stuff related to Perl?
77. Have you studied buses? What types?
78. Have you studied pipelining? List the 5 stages of a 5 stage pipeline. Assuming 1 clock per stage, what is the
latency of an instruction in a 5 stage machine? What is the throughput of this machine ?
79. How many bit combinations are there in a byte?
80. For a single computer processor computer system, what is the purpose of a processor cache and describe its
operation?
81. Explain the operation considering a two processor computer system with a cache for each processor.
82. What are the main issues associated with multiprocessor caches and how might you solve them?
83. Explain the difference between write through and write back cache.
84. Are you familiar with the term MESI?
85. Are you familiar with the term snooping?

86. Describe a finite state machine that will detect three consecutive coin tosses (of one coin) that results in
heads.
87. In what cases do you need to double clock a signal before presenting it to a synchronous state machine?
88. You have a driver that drives a long signal & connects to an input device. At the input device there is either
overshoot, undershoot or signal threshold violations, what can be done to correct this problem?
89. What are the total number of lines written by you in C/C++? What is the most complicated/valuable
program written in C/C++?
90. What compiler was used?
91. What is the difference between = and == in C?
92. Are you familiar with VHDL and/or Verilog?
93. What types of CMOS memories have you designed? What were their size? Speed?
94. What work have you done on full chip Clock and Power distribution? What process technology and budgets
were used?
95. What types of I/O have you designed? What were their size? Speed? Configuration? Voltage requirements?
96. Process technology? What package was used and how did you model the package/system? What parasitic
effects were considered?
97. What types of high speed CMOS circuits have you designed?
98. What transistor level design tools are you proficient with? What types of designs were they used on?
99. What products have you designed which have entered high volume production?
100.What was your role in the silicon evaluation/product ramp? What tools did you use?
101. If not into production, how far did you follow the design and why did not you see it into production?

You might also like