Scribd
Upload
471 views8 pages

A109 Flashing Procedure

This document provides instructions for flashing the firmware on an A109 phone. It includes technical specifications of the phone, safety cautions that must be followed, steps to install the upgrade driver and configure the upgrade platform software. The flashing procedure involves selecting the upgrade version in the configuration menu, applying the selection, connecting the powered-off phone, and starting the upgrade process. Upon completion, the upgraded firmware version can be verified by inputting a specific code. Proper anti-static precautions and using authorized tools and components is emphasized.

Uploaded by

nkj_nbp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
471 views8 pages

A109 Flashing Procedure

This document provides instructions for flashing the firmware on an A109 phone. It includes technical specifications of the phone, safety cautions that must be followed, steps to install the upgrade driver and configure the upgrade platform software. The flashing procedure involves selecting the upgrade version in the configuration menu, applying the selection, connecting the powered-off phone, and starting the upgrade process. Upon completion, the upgraded firmware version can be verified by inputting a specific code. Proper anti-static precautions and using authorized tools and components is emphasized.

Uploaded by

nkj_nbp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

A109

Flashing Procedure

1. Technical Specifications :
Particular
Key Matrix For Flashing
Chipset
Android Version
Frequency
Network Mode
ROM
RAM
Internal SD Card memory
Expandable Memory
Factory mode code

Remarks
NA
MT6589
Android 4.4
GSM900/1800/1900MHz UMTS900/2100MHz
Dual SIM: WCDMA+GSM
4 GB
1 GB
1.4GB for user
32GB
*#9527*#

A109

Flashing Procedure

2. CAUTIONS
I.
II.
III.
IV.
V.
VI.

Flashing & Servicing must be undertaken by qualified personnel only.


Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn.
Use only approved Tools & components as specified in the parts list.
Ensure all components, modules, screws, and insulators are correctly re-fitted after servicing and
alignment
Ensure all cables and wires are repositioned correctly if Handset disassembled
Electrostatic discharge can easily damage the sensitive components of electronic products.
Therefore, Service Centre must adhere the precautions which mentioned above.

3. Installation of Upgrade Driver


1. Get the upgrade driver files;
2. Power the phone off and connect it to the PC via the data cable of standard configuration; the
driver is not installed if it is the first time of upgrade; please install the driver manually, and specify
the installation path to the position where the driver is located;
3. After the upgrade driver is successfully installed, the device driver port can be seen in Device
Manager:

A109
4. Configuration of Upgrade Platform
Flash tool setup must install first

Click on Next > Next > Next to finish installation

Flashing Procedure

A109
Flash tool shortcut will available on Desktop

Once click on above icon , Below error will appear

Right click on icon and go to properties

Flashing Procedure

A109

Flashing Procedure

Go to compatibility > Enable below shown Run this program in compatibility mode for :

Select system OS , Ex: window 7 > click on Apply > OK

A109

Flashing Procedure

Now double click on Flash tool icon, below screen will appear, Enter Password: 369

Open the upgrade platform (password: 9527) to finish the following configuration
1

Click on Config
[Config ]
3

Select the upgrade version

Select
[7296S_I01]

Click [Apply]to verify the version

A109

Flashing Procedure

Below screen will appear, wait till tool verify the files

Connection of Mobile Phone before Upgrade

First click Start; then connect the phone; the


phone is powered off with battery installed.

A109

Flashing Procedure

Upgrade Successful

Upgrade successful

After upgrade is finished, input *#*#9527#*#* to check the version.

Thanks
For any Query or suggestion, Please write to [email protected]

You might also like