IB - PHYSICS (AHL) - Wave Phenomena: Topic 11.1 Standing Waves
IB - PHYSICS (AHL) - Wave Phenomena: Topic 11.1 Standing Waves
Points D,C and B indicate nodes and points A,E and F indicate antinodes.
In stationary waves, there are certain points called nodes where the particles are
permanently at rest and certain other points called antinodes where the particles vibrate
with maximum amplitude. The nodes and antinodes are formed alternately.
All the particles of the medium except those at the nodes, vibrate simple harmonically
with a time period equal to that of the component waves.
The amplitude of vibration increases gradually from zero to maximum from a node to an
antinode.
The medium is split up into segments. The particles in a segment vibrate in phase. The
particles in one segment are out of phase with the particles in the neighbouring segment
by 180o.
Velocity and acceleration of all the particles separated by a distance l, are the same at a
given instant.
In a given segment, the particles attain their maximum or minimum velocity and
acceleration at the same instant.
During each vibration, all the particles pass simultaneously through their mean positions
twice, with maximum velocity which is different for different particles.
Harmonics
Standing wave patterns are produced within the medium when it is vibrated at certain
frequencies. Each frequency is associated with a different standing wave pattern. These
frequencies and their associated wave patterns are referred to as harmonics. A careful study of
the standing wave patterns reveal a clear mathematical relationship between the wavelength of
the wave which produces the pattern and the length of the medium in which the pattern is
displayed. Furthermore, there is predictability about this mathematical relationship that allows
one to generalize and deduce a statement concerning this relationship. To illustrate, consider the
first harmonic standing wave pattern for a vibrating rope as shown below.
In comparing the standing wave pattern for the first harmonic with its single loop to the diagram
of a complete wave, it is evident that there is only one-half of a wave stretching across the length
of the string. That is, the length of the string is equal to one-half the length of a wave. Put in the
form of an equation:
Now consider the string being vibrated with a frequency that establishes the standing wave
pattern for the second harmonic.
The second harmonic pattern consists of two anti-nodes. Thus, there are two loops within the
length of the string. Since each loop is equivalent to one-half a wavelength, the length of the
string is equal to two-halves of a wavelength. Put in the form of an equation:
The same reasoning pattern can be applied to the case of the string being vibrated with a
frequency that establishes the standing wave pattern for the third harmonic.
When inspecting the standing wave patterns and the length-wavelength relationships for the first
three harmonics, a clear pattern emerges. The number of antinodes in the pattern is equal to the
harmonic number of that pattern. The first harmonic has one antinode; the second harmonic has
two antinodes; and the third harmonic has three antinodes. Thus, it can be generalized that the
nth harmonic has n antinodes where n is an integer representing the harmonic number.
Furthermore, one notices that there are n halves wavelengths present within the length of the
string. Put in the form of an equation:
Observe that each consecutive harmonic is characterized by having one additional node and
antinode compared to the previous one. The table below summarizes the features of the standing
wave patterns for the first several harmonics.
Harmonic
No of Nodes
No of Antinodes
1st
2nd
3rd
4th
5th
6th
nth
n+1
Pattern
--
Standing waves
The disturbance produced in the medium There is no onward motion of the disturbance
All the particles attain the same maximum All the particles attain their own maximum
velocity when they pass through their mean velocity at the same time when they pass through
positions.
their mean positions.
In the case of a longitudinal progressive
wave all the parts of the medium undergo
similar variation of density one after the
other. At every point there will be a density
variation.
Kinds of source:
Doppler effect is true for all kinds of waves that is sound waves and light waves.It may be noted
that
1). Doppler's effect give the change in frequency of vibrations of source and it does not give any
information about the intensity of vibrations of source.
2). For sound waves doppler effect depends on the relative motion of source and observer and
also it depends on whether the source or the observer is moving.
Doppler effect in sound is studied in four parts:
Wavelength
Also, since the velocity of the wave equals the frequency times the wavelength (v = f or f =
v/), the equation for the observed wavelength when the source is traveling toward you is:
o = (1 vt/v)
where
Velocity
f you know the resulting frequency, you can find the speed of the source moving toward you:
vt = v(f/fo + 1)
Source moving away from a stationary observer
When the source of sound is moving away from you, the pitch you hear is lower, the frequency is
slower and the wavelength is longer than what was emitted from the source.
Note that the equations are the same as when the source is moving toward you, except that the
"" sign is replaced by a "+" sign to indicate the change in direction of the source. In the case
of velocity, the "+" sign is replaced by a "" sign.
Frequency
The equation for the observed frequency of a waveform when the source is traveling away from
you is:
fo = fv/(v + va)
where va is the velocity of the source away from you.
Wavelength
The equation for the observed wavelength when the source is traveling away from you is:
o = (1 + va/v)