Scribd
Upload
666 views10 pages

Chess Pieces Manufacturing Description Part2

This document provides instructions for producing rook and knight chess pieces using a CNC turning machine. The rook and knight will be machined from round stock in a single clamping using turning and milling tools. The rook will be completely machined in one cycle, while the knight requires selecting the correct program depending on the rotational direction of the C axis. Safety procedures, workpiece materials, tools, machining steps, and simulation pictures are described to guide production of the chess pieces. Additional resources for tool and machine specifications are also referenced.

Uploaded by

Chanel Méndez Ramírez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
666 views10 pages

Chess Pieces Manufacturing Description Part2

This document provides instructions for producing rook and knight chess pieces using a CNC turning machine. The rook and knight will be machined from round stock in a single clamping using turning and milling tools. The rook will be completely machined in one cycle, while the knight requires selecting the correct program depending on the rotational direction of the C axis. Safety procedures, workpiece materials, tools, machining steps, and simulation pictures are described to guide production of the chess pieces. Additional resources for tool and machine specifications are also referenced.

Uploaded by

Chanel Méndez Ramírez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Production of chess pieces

Part 2: Rook and knight

Rook and knight chess pieces

Check and checkmate - part 2. The chess set is further augmented. This
time, you manufacture the rook and knight pieces. The pieces are becoming
more complex and require the use of driven tools.
All information required for the reproduction, tool data and ShopTurn
machining plans are summarized in the following sections.
www.siemens.com/cnc4you

Table of Contents
1. Safety note

2. Preliminary remark

3. Workpiece blank

4. Turning machine and turning programs

5. Verwendete Werkzeuge

6. Turning the rook chess piece

7. Turning and milling the knight chess piece

8. Information in the Internet

9. Simulation pictures of the programs

10. Figures of the workpieces

10

1. Safety note

The handling of machines brings many dangers. Consequently, the legal and general company safety
regulations must always be observed for the production of the chess pieces.
2. Preliminary remark

The following description is oriented to technicians familiar with a CNC turning machine who have
experience or knowledge of the SINUMERIK CNC with ShopTurn. All technology data listed here is
appropriate for the machines, tools, materials and machining plans used to produce the chess pieces.
Although the wide range of conditions prevailing in other workshops mean they are only examplary for a
reproduction, in most cases they should allow a problem-free reproduction.
The workpieces are provided as series in the Portal. The programs and data for two chess pieces will be
made available for each series. The cutting speeds, feeds and the tool data must be adapted appropriately in
the programs depending on the associated material.
ShopTurn permits the turning and milling of the chess pieces in a single clamping. The contours of the rook
and knight are created in the first step. For the rook, the battlements are milled in the second work step. The
contour and the mane of the knight are machined with the milling tool. For the knight, this machining step
means the appropriate program must be used depending on the positive rotational direction of the C axis.
The chess pieces are cut off as last work step.

Production of a rook and knight

www.siemens.com/cnc4you

2/10

Each of the chess pieces must be produced from two different materials. There are no limits placed on the
fantasy of the material you use. For the white pieces, aluminum or steel, and for the black pieces, brass, are
suitable as material, although any different colored material is conceivable.
To guarantee success, we recommend simulating the machining plans prior to the start. This detects and
avoids any program errors.
You can download without charge all programs and production descriptions for the workpieces in the
registered "My SINUMERIK" Internet area at www.siemens.com/cnc4you. We make the following files
and formats available here:
Jobshop files for ShopTurn as of software version 6.4
3. Workpiece blank

Rod material, AlCuMgPb material, material no. 3.1645; 30 mm diameter


Further materials on request
4. Turning machine and turning programs

Spinner turning machine, TC600 with C and Y axis, equipped with SINUMERIK 840D sl
ShopTurn version 7.2 turning program
TURM.MPF and SPRINGER_SPINDEL_LINKS.MPF or SPRINGER_SPINDEL_RECHTS.MPF
machining plans for turning and milling
5. Used tools

Tool name
in the machining plan

Order no. of the


Kennametal tools

SCHLICHTER_35

SVJBL 2020K11
VBGT110304HP KC5410

SCHLICHTER_STIRN

SDJCR 2020K11
DCGT11T304HP KC5410

STECHER_4

A3SCL 2020K0426
A2040N00CF02 KU25T

8 mm diameter end mill, threesided cutter

FRAESER_STIRN_8

F3AA0800AWM45 K600

2 mm diameter end mill, twosided cutter

FRAESER_MANTEL_R1

F2AH0200ADN30 DC625M

8 mm diameter end mill, threesided cutter

FRAESER_MANTEL_8

F3AA0800AWM45 K600

Designation
Turning holder with tool insert
Turning holder with tool insert
Cut-off tool with
tool insert

Production of a rook and knight

www.siemens.com/cnc4you

3/10

6. Turning the rook chess piece

The rook is produced in the main spindle in a single work cycle.


Work steps on the turning machine:
1. Approach the reference point of the machine.
2. Import the TURM.MPF machining plan.
3. Enter measured tools in the tool list.
4. Place tools in the magazine.
5. Clamp round stock, clamping length approx. 50 mm.
6. Set workpiece zero point by scratching.
7. Perform simulation.
8. Start the manufacturing; process the machining plan.
7. Turning and milling the knight chess piece

The knight is manufactured in the main spindle in a single cycle.


Work steps on the turning machine:
1. Approach reference point of the machine.
2. Import the SPRINGER_SPINDEL_RECHTS.MPF or SPRINGER_SPINDEL_LINKS.MPF machining
plan.
3. Enter measured tools in the tool list.
4. Place tools in the magazine.
5. Clamp round stock, clamping length approx. 60 mm.
6. Set workpiece zero point by scratching.
7. Perform simulation.
8. Start the manufacturing; process the machining plan.

Production of a rook and knight

www.siemens.com/cnc4you

4/10

8. Information in the Internet

Design of the parts, creation of the programs


R&D Steuerungstechnik GmbH & Co. KG
Hocksteiner Weg 87 - 95
41189 Mnchengladbach / Germany
in the Internet: www.rud-steuerungstechnik.de
Dimensions and performance data for the tools to be used
Kennametal Holding GmbH
Werkzeuge und Systeme fr Metallzerspanung
Wehlauer Str. 73
90766 Frth / Germany
in the Internet: www.kennametal.com
Details of the tool machine to be used
SPINNER Werkzeugmaschinenfabrik
Rudolf-Diesel-Ring 24
82054 Sauerlach / Germany
in the Internet: http://www.spinner-wzm.de
Siemens AG manuals and information
Manuals and detailed information about our products are available at www.siemens.com/sinumerik ->
index or search: DOConWEB -> SINUMERIK
"Simple turning with ShopTurn" training document
-> Info/Training -> "Simple turning with ShopTurn" training document
ShopTurn product brief
-> 840D/840Di/810D users -> ShopTurn 840D/810D product brief
ShopTurn operating/programming
-> 840D/840Di/810D users -> ShopTurn operating and programming
Searching tips at DOConWEB
DOConWEB permits the fast access to individual pages from documents without loading the complete file.
You have the possibility to restrict the selection by clicking "A-Z"
(-> a search is now only made within this item in the index),
Or click the magnifying glass
(-> the search is now made for complete text within this item).

Production of a rook and knight

www.siemens.com/cnc4you

5/10

9. Simulation pictures of the programs

Simulation of the rook chess piece

Production of a rook and knight

www.siemens.com/cnc4you

6/10

Simulation of the volume model of the rook chess piece

Production of a rook and knight

www.siemens.com/cnc4you

7/10

Simulation of the knight chess piece

Production of a rook and knight

www.siemens.com/cnc4you

8/10

Simulation of the volume model of the knight chess piece

Production of a rook and knight

www.siemens.com/cnc4you

9/10

10. Figures of the workpieces

Complete chess set

Production of a rook and knight

www.siemens.com/cnc4you

10/10

You might also like