Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    EF70-200mm f/2.8L IS II USM: COP Y

    Uploaded by

    Foxman2k
    ef70-200f2

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    EF70-200mm f/2.8L IS II USM: COP Y

    Uploaded by

    Foxman2k
    18 views17 pages
    ef70-200f2

    Original Title

    ef70-200f2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ef70-200f2

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views17 pages

    EF70-200mm f/2.8L IS II USM: COP Y

    Uploaded by

    Foxman2k
    ef70-200f2

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 17

    EF70-200mm f/2.

    8L IS II USM

    Y
    P
    O
    ENG
    Instruction

    Thank you for purchasing a Canon product.


    Dedicated to EOS cameras, the Canon EF70200mm f/2.8L IS II USM lens is a highperformance telephoto zoom lens equipped
    with an Image Stabilizer.
    IS stands for Image Stabilizer.
    USM stands for Ultrasonic Motor.

    C
    Conventions used in this instruction
    Warning to prevent lens or camera malfunction
    or damage.

    Features
    1. The Image Stabilizer gives the equivalent
    effect of a shutter speed four stops faster*.
    2. With fluorite and UD lens elements,
    outstanding image delineation is obtained.
    3. Ultrasonic motor (USM) for quick and quiet
    autofocusing.
    4. Manual focusing is available after the subject
    comes into focus in autofocus mode (ONE
    SHOT AF).
    5. A truly round aperture hole results in a nicer
    background blur.
    6. The lens is compatible with Extender EF1.4X ll
    and EF2X ll.
    7. Tight seal structure ensures excellent dustproof and drip-proof performance.

    Y
    P
    O

    * Based on [1/focal length] second. Generally, it requires


    a shutter speed [1/focal length] second or faster to
    prevent camera shake.

    Supplementary notes on using the lens and


    taking pictures.

    ENG-1

    a Safety Precautions
    a Safety Precautions
    Do not look at the sun or a bright light source
    through the lens or camera. Doing so could result
    in loss of vision. Looking at the sun directly through
    the lens is especially hazardous.
    Whether it is attached to the camera or not, do
    not leave the lens under the sun without the
    lens cap attached. This is to prevent the lens from
    concentrating the suns rays, which could cause a
    fire.

    Handling Cautions

    If the lens is taken from a cold environment into


    a warm one, condensation may develop on the
    lens surface and internal parts. To prevent
    condensation in this case, first put the lens into an
    airtight plastic bag before taking it from a cold to
    warm environment. Then take out the lens after it
    has warmed gradually. Do the same when taking
    the lens from a warm environment into a cold one.
    Do not leave the lens in excessive heat such as in
    a car in direct sunlight. High temperatures can
    cause the lens to malfunction.

    This device complies with Part 15 of the FCC Rules. Operation is


    subject to the following two conditions: (1) This device may not
    cause harmful interference, and (2) this device must accept any
    interference received, including interference that may cause
    undesired operation.
    Do not make any changes or modifications to the equipment
    unless otherwise specified in the instructions. If such changes or
    modifications should be made, you could be required to stop
    operation of the equipment.
    This equipment has been tested and found to comply with the
    limits for a class B digital device, pursuant to part 15 of the FCC
    Rules. These limits are designed to provide reasonable protection
    against harmful interference in a residential installation. This
    equipment generates, uses and can radiate radio frequency
    energy and, if not installed and used in accordance with the
    instructions, may cause harmful interference to radio
    communications.
    However, there is no guarantee that interference will not occur in
    a particular installation. If this equipment does cause harmful
    interference to radio or television reception, which can be
    determined by turning the equipment off and on, the user is
    encouraged to try to correct the interference by one or more of
    the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Consult the dealer or an experienced radio/TV technician for
    help.

    Y
    P
    O

    This Class B digital apparatus complies with Canadian ICES-003.

    ENG-2

    Nomenclature
    Focusing distance range selection switch ( 5)
    Distance scale ( 11)

    Hood mount ( 7)

    Zoom ring ( 6)

    Filter mounting
    thread ( 13)

    Rubber ring ( 4)

    Y
    P
    O

    Contacts ( 4)

    Focusing ring ( 5)
    Lens mount index ( 4)

    Focus mode switch ( 5)


    Image stabilizer switch ( 8)
    Image stabilizer mode selector switch ( 8)

    Tripod mount ( 12)


    Orientation lock knob ( 12)

    For detailed information, reference page numbers are provided in parentheses ( **).

    ENG-3

    1. Mounting and Detaching the Lens


    See your cameras instructions for details on
    mounting and detaching the lens.

    After detaching the lens, place the lens with the


    rear end up to prevent the lens surface and
    electrical contacts from getting scratched.
    If the contacts get soiled, scratched, or have
    fingerprints on them, corrosion or faulty
    connections can result. The camera and lens
    may not operate properly.
    If the contacts get soiled or have fingerprints on
    them, clean them with a soft cloth.
    If you remove the lens, cover it with the dust
    cap. To attach it properly, align the lens mount
    index and the K index of the dust cap as shown
    in the diagram, and turn clockwise. To remove it,
    reverse the order.

    The lens mount has a rubber ring for enhanced


    water- and dust-resistance. The rubber ring may
    cause slight abrasions around the camera's lens
    mount, but this will not cause any problems. If the
    rubber ring becomes worn, it is replaceable by a
    Canon Service Center at cost.

    Y
    P
    O

    ENG-4

    2. Setting the Focus


    Mode

    3. Switching the Focusing


    Distance Range

    To shoot in autofocus (AF) mode, set the focus


    mode switch to AF.
    To use only manual focusing (MF), set the focus
    mode switch to MF, and focus by turning the
    focusing ring. The focusing ring always works,
    regardless of the focus mode.

    Y
    P
    O

    You can set the focusing distance range to


    1.2 m/3.9 ft. to infinity or 2.5 m/8.2 ft. to infinity.
    By setting the suitable focusing distance range,
    the actual autofocusing time can be shorter.

    After autofocusing in ONE SHOT AF mode, focus


    manually by pressing the shutter button halfway
    and turning the focusing ring. (Full-time manual
    focus)

    ENG-5

    4. Zooming

    To zoom, turn the zoom ring.


    Be sure to finish zooming before focusing.
    Zooming after focusing can affect the focus.

    Y
    P
    O

    ENG-6

    5. Hood
    The ET-87 hood can keep unwanted light out of the lens, and also protects the front of the lens from
    rain, snow, and dust.

    Attaching

    To attach the hood, align the hoods attachment


    position mark with the red dot on the front of the
    lens, then turn the hood as shown by the arrow
    until the lens' red dot is aligned with the hood's
    stop position mark.

    Y
    P
    O

    Button

    Removing
    To remove the hood, hold down the button on the
    side and turn the hood in the direction of the
    arrow until the position mark on the hood aligns
    with the red dot.
    The hood can be reverse-mounted on the lens
    for storage.

    Part of the picture may be blocked if the hood is not attached properly.
    When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not
    grasp the rim of the hood to turn it.

    ENG-7

    6. Image Stabilizer Settings


    You can use the image stabilizer in AF or MF mode.

    Set the STABILIZER switch


    to
    .
    If you are not going to use the
    image stabilizer function, set
    the switch to
    .

    Y
    P
    O

    Select the stabilizer mode.


    MODE 1: Corrects vibrations
    in all directions. It is mainly
    effective for shooting still
    subjects.
    MODE 2: It compensates for
    vertical camera shake during
    following shots in a horizontal
    direction, and compensates for
    horizontal camera shake
    during following shots in a
    vertical direction.

    When you press the shutter


    button halfway, the Image
    Stabilizer will start
    operating.
    Make sure the image in the
    viewfinder is stable, then press
    the shutter button the rest of
    the way down to take the
    picture.

    ENG-8

    7. Tips on Using the Image Stabilizer


    The image stabilizer in this lens is effective for hand-held shots under the following conditions.

    MODE 1

    MODE 2

    C
    In semi-darkened areas such as indoors or
    outdoors at night.
    In locations where flash photography is
    prohibited, such as art museums and theater
    stages.
    In situations where your footing is uncertain.
    In situations where fast shutter settings cannot
    be used.

    Y
    P
    O
    When panning subjects in motion.

    ENG-9

    Tips on Using the Image Stabilizer

    The Image Stabilizer cannot compensate for a


    blurred shot caused by a subject that moved.
    Set the STABILIZER switch to
    when you are
    taking pictures using the Bulb setting (long
    exposures). If the STABILIZER switch is set to
    ,
    the image stabilizer function may introduce errors.
    The Image Stabilizer might not be fully effective
    in the following cases:
    You shoot while riding on a bumpy road.
    You move the camera dramatically for a
    panning shot in Mode 1.
    You shoot using techniques other than
    following shots in Mode 2.
    The Image Stabilizer consumes more power
    than normal shooting, so fewer shots can be
    taken if you use the function.
    The image stabilizer operates for about two
    seconds even when your finger is off the shutter
    button. Do not remove the lens while the stabilizer
    is in operation. This will cause a malfunction.
    With the EOS-1V/HS, 3, ELAN 7E/ELAN
    7/30/33, ELAN 7NE/ELAN 7N/30V/33V, ELAN
    II/ELAN IIE/50/50E, REBEL 2000/300, IX, and
    D30, the Image Stabilizer will not work during
    self-timer operation.

    Using a tripod also stabilizes the image.


    However, depending on the kind of tripod and
    shooting conditions, sometimes it may be better
    to turn off the Image Stabilizer function.
    The stabilizer is equally effective for hand-held
    photography and photography with a monopod.
    The Image Stabilizer function also operates
    when the lens is used with the EF12 II/EF25 II
    Extension Tube, and the EF1.4X II/EF2X II
    Extender.
    Pictures may look distorted after being taken
    depending on the camera, but this doesn't affect
    shooting.
    If you set the cameras Custom Function to
    change the assigned button to operate the AF,
    the Image Stabilizer will operate when you press
    the newly assigned AF button.

    Y
    P
    O

    ENG-10

    8. Infinity Compensation Mark

    9. Infrared Index

    Infinity compensation mark

    Distance index

    To compensate for shifting of the infinity focus


    point that results from changes in temperature.
    The infinity position at normal temperature is the
    point at which the vertical line of the L mark is
    aligned with the distance indicator on the
    distance scale.

    For accurate manual focusing of subjects at


    infinity, look through the viewfinder or look at the
    magnified image* on the LCD screen while
    rotating the focusing ring.
    * For cameras with Live View shooting capability.

    The infrared index corrects the focus setting when using


    monochrome infrared film. Focus on the subject
    manually, then adjust the distance setting by moving the
    focusing ring to the corresponding infrared index mark.

    Y
    P
    O

    Some EOS cameras cannot use infrared film. See


    the instructions for your EOS camera.

    The infrared index position is based on a


    wavelength of 800 nm.
    The compensation amount differs depending on
    the focal length. Use the indicated focal length as
    a guide when setting the compensation amount.
    Be sure to observe the manufacturers
    instructions when using infrared film.
    Use a red filter when you take the picture.

    ENG-11

    10. Using the Tripod Mount


    Adjusting the Revolving Mount
    You can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a
    particular camera model for switching between vertical and horizontal positions.

    Detaching
    First remove the lens from the camera and then remove the tripod mount from the lens as shown
    below. To attach the tripod mount, reverse the procedure.

    C
    Loosen the orientation
    locking knob.

    Y
    P
    O

    Rotate the tripod mount and


    align the mounting indicator
    on the tripod mount with the
    one on the lens.

    Slide off the tripod collar


    away from the rear of the
    lens.

    ENG-12

    11. Filters

    13. Extension Tubes

    (Sold separately)

    You can attach filters to the filter mounting thread


    on the front of the lens.
    If you need a polarizing filter, use the Canon
    Circular Polarizing Filter (77mm).
    To adjust the polarizing filter, first remove the
    lens hood.

    (Sold separately)
    You can attach Extension Tube EF12 II or EF25
    II for magnified shots. The shooting distance and
    magnification are shown below.

    Y
    P
    O
    EF12 ll

    12. Close-up Lenses


    (Sold separately)
    Attaching a 500D (77mm) Close-up Lens
    enables close-up photography.
    Magnification will be 0.14 0.60.

    EF25 ll

    70mm
    200mm
    70mm
    200mm

    Camera-to-Subject
    Distance (mm)
    Near
    Far
    538
    628
    998
    3404
    400
    406
    862
    1740

    Magnification
    Near
    0.23
    0.28
    0.42
    0.36

    Far
    0.17
    0.06
    0.38
    0.14

    Manual focusing is recommended for accurate


    focusing.

    Close-up Lens 250D cannot be attached


    because there is no size that fits the lens.
    Manual focusing is recommended for accurate
    focusing.

    ENG-13

    14. Extenders

    (Sold separately)

    With Extender EF1.4X ll or EF2X ll attached, the lens specifications will change as follows:
    Item

    With EF1.4X ll Extender

    With EF2X ll Extender

    Focal length (mm)

    98 280

    140 400

    Aperture

    f/4 45

    f/5.6 64

    2520 850

    1620 610

    Diagonal
    Angle of view

    Vertical

    1350 455

    910 330

    Horizontal

    2050 720

    1340 510

    Maximum magnification ()

    0.30

    Y
    P
    O

    0.44

    First attach the Extender to the lens, then attach the lens to the camera. Detach it from the
    camera in the reverse order. If you attach the lens to the camera first, misoperation may
    occur.
    Only one Extender can be attached to the lens and camera.
    If you use an Extender on the lens mounted on a EOS A2/A2E/5, set the exposure
    compensation to -1/2 stop for the EF1.4X ll or -1 stop for the EF2X ll.

    Autofocusing is still enabled with Extender EF1.4X II/EF2X ll attached.


    When an Extender is attached, the AF speed will become slower by design to retain proper
    AF control.

    ENG-14

    Specifications
    Focal Length & Max. Aperture

    70 200 mm, f/2.8

    Lens Construction

    23 elements in 19 groups

    Min. Aperture

    f/32

    Angle of View

    Diagonal: 34 12

    Min. Focusing Distance

    1.2 m / 3.9 ft.

    Max. Magnification & Field of view

    0.21 (at 200 mm), 308 463 115 171 mm / 12.1 18.2 4.5 6.7 inch (at 1.2 m)

    Filter Diameter

    77 mm

    Max. Diameter & Length

    88.8 199 mm / 3.5 7.8 inch

    Weight

    1490 g / 52.6 oz.

    Lens Hood

    ET-87

    Lens Cap

    E-77U

    Case

    LZ1326

    Vertical: 1930 7

    Horizontal: 29 10

    Y
    P
    O

    The lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm when including the
    lens cap and dust cap.
    The size and weight listed are for the lens only, except as indicated.
    Aperture settings are specified on the camera.
    All data listed is measured according to Canon standards.
    Product specifications and appearance are subject to change without notice.

    ENG-15

    CT1-7586-002

    Y
    P
    O

    CANON INC. 2010

    2010.2

    You might also like