Công Tơ ZMG 400

Electricity Meters IEC/MID
INDUSTRIAL+COMMERCIAL
Landis+Gyr Dialog
ZMG400AR/CR, ZFG400AR/CR
TECHNICAL DATA
IEC-specific data
Current
Nominal Current In
1 A, 5 A, 5||1 A
Maximal Current Imax

metrological 1 A, 5A
metrological 5||1 A
thermal 1 A
thermal 5 A
thermal 5||1
Short Circuit
200%
6A
2.4 A
12 A
8A
0.5 s with 20 x Imax
Measurement Accuracy
Accuracy ZxG405xR only with In = 5 A
active energy to IEC 62053-22
class 0.5 S
reactive energy to IEC 62053-23
class 1
Accuracy ZxG410xR
active energy to IEC 62053-21
reactive energy to IEC 62053-23
class 1
class 2
Measurement Behaviour
Starting Current ZxG405xR
according to IEC
typical
General
Voltage ZMG400xR
Nominal Voltage Un
Voltage Range
3 x 58/100 to 69/120 V
80% to 115% Un
Nominal Voltage Un
Voltage Range
3 x 220/380 to 240/415 V
70% to 125% Un
Voltage ZFG400xR
Nominal Voltage Un
Voltage Range
3 x 100 to 120 V
80% to 115% Un
Frequency
Nominal Frequency fn
tolerance
50 or 60 Hz
2%
H 71 0200 0381 h en ZMG400AR/CR, ZFG400AR/CR Technical Data
0.1% In = 5 A
0.07% In = 5 A
Starting Current ZxG410xR

according to IEC
0.2% In
typical
0.14% In
5||1 A
In = 1 A
The startup of the meter is controlled by the
starting power and not by the starting current.
Starting Power in M-Circuit
nominal voltage x starting current
single phase
Starting Power in F-Circuit

nominal voltage x starting current x 3
all phases
Landis+Gyr AG
1/6
Impermeability according to IEC 60529
MID-specific data
Current (for Classes B/C)
Reference Current Iref
1.0, 5.0 A/5.0 A
Minimum Current Imin
0.01, 0.05 A/0.05 A
Transitional Current Itr
0.05, 0.25 A/0.25 A
Maximum Current Imax
2.0, 6.0, 10.0 A/10.0 A
ZxD400AR/CR; to EN 50470-3
0.002, 0.01 A
0.005 A
to IEC 61000-4-2
15 kV
Electromagnetic RF Fields
80 MHz 2 GHz
to IEC 61000-4-3
10 and 30 V/m
class B
Fast Transient Burst Test

to IEC 61000-4-4
current and voltage circuits not under load
4 kV
current and voltage circuits under load
according to IEC 62053-21/22/23
2 kV
auxiliary circuits > 40 V
1 kV
Fast Transient Surge Test
current and voltage circuits
General
Operating Behaviour
Voltage Failure (Power Down)
bridging time according to IEC
0.5 s
data storage
after another 0.2 s
switch off
after approx. 1 s
Voltage Restoration (Power Up)
function standby 3 phases
function standby 1 phase
detection of
energy direction + phase voltage
Electrostatic Discharges
contact discharge
Classes B and C
Measurement Behaviour
Starting Current Ist
Class B: Ist
Class C: Ist
Electromagnetic Compatibility
Radio Interference Suppression

according to IEC/CISPR 22
Measurement Accuracy
IP53
after 4 s
after 5 s
to IEC 61000-4-5
4 kV
1 kV
Insulation Strength
Insulation Strength
4 kV @ 50 Hz during 1 min
Impulse Voltage 1.2/50s

to IEC 62052-11
10 kV
For version 3 x 58/100 to 69/120 V:
8 kV
6 kV
after 4 to 5 s
Protection Class II according to IEC 60050-131
Power Consumption
Power Consumption per Phase in Voltage Circuit
phase voltage
58 V
100 V 240 V
active power (typical)
0.5 W
0.5 W 0.8 W
apparent power (typical) 1.5 VA 1.5 VA 5 VA
Power Consumption per Phase in Current Circuit
phase current
1A
5A
10 A
active power (typical)
0.08 W 0.125 W 0.5 W
apparent power (typical) 0.1 VA 0.15 VA 0.6 VA
Environmental Influences
Temperature Range
operation class 1
operation class 0.5
storage
to IEC 62052-11
40 C to +70 C
25 C to +70 C
40 C to +85 C
Temperature Coefficent
range
25 C to +70 C
average value (typical)
0.012% per K
at cos=1 (from 0.05 Ib to Imax)
0.02% per K
0.03% per K
at cos=0.5 (from 0.1 Ib to Imax)
Landis+Gyr
2/6
Calendar Clock
Accuracy
Calendar Type
< 5 ppm
Gregorian or Persian (Jalaali)
Backup Time (Power Reserve)

with supercap
loading time for max. backup time
with battery 1
(calendar clock, display readout)
battery type
with battery 2 (calendar clock only)
battery type
> 21 days
300 h
10 years
UM3-R6-AA
10 years
CR2032
Display
Characteristics
type
LCD liquid crystal display
digit size in value field
9 mm
number of digits in value field
up to 8
digit size in index field
6 mm
number of digits in index field
up to 7
Inputs and Outputs

Control Inputs
control voltage Us
input current
100240 V AC
< 2 mA ohmic at 230 V AC
Output Contacts
type
solid state relay
voltage
12240 V AC/DC
max. current
100 mA
max. switching frequency (pulse length 20 ms) 25 Hz
Optical Test Output
type
number
meter constant
Active and Reactive Energy

red LED
2
selectable
Communication Interfaces
Optical Interface
according to IEC 62056-21
type
serial, asynchronous, half duplex
max. bit rate
19200 bps
protocols
IEC 62056-21 and dlms
RS232 Interface
type
to DIN 61393/DIN 66259

serial, asymmetric,
asynchronous, bidirectional
operating mode
intelligent or transparent
nominal voltage
9 V DC
maximum voltage
15 V DC
minimum voltage
5 V DC
max. bit rate
38400 bps
protocols
max. conductor lenght depending on
environment and connecting cable
30 m
insulation resistance
to meter
4 kVAC/50 Hz, 1 min
creep distance
6.2 mm
RS485 Interface
according to ISO-8482
type
serial, symmetrical, half duplex
nominal voltage range
7 to +12 V DC
binary 1 state
difference voltage < 0.2 V
binary 0 state
difference voltage > 0.2 V
max. bit rate
38400 bps
max. number of slaves
31
protocols
max. conductor lenght depending on
environment and connecting cable
1000 m
to meter
4 kVAC/50 Hz, 1 min
creep distance
6.2 mm
CS Interface
to IEC 62056-21/DIN 66258
type
serial, bidirectional current interface
nominal voltage without load
24 V DC
max. voltage without load
30 V DC
binary 1 state
1030 mA
binary 0 state
2 mA
max. bit rate
9600 bps
protocols
to meter
4 kVAC/50 Hz, 1 min
creep distance
6.2 mm
Weight and Dimensions

Weight
approx. 1.5 kg
External Dimensions
width
height (with short terminal cover)
height (with standard terminal cover)
height (with extended hook)
depth
Suspension Triangle
height (with extended hook)
height (suspension eyelet open)
height (suspension eyelet covered)
width
Terminal Cover
short
standard
long
ZxB-type 80 mm
ZxB-type 110 mm
ADP1 adapter
RCR/FTY adapter
40
60
80
110
no
mm
mm
mm
mm
177
244
281.5
305.5
75
mm
mm
mm
mm
mm
230
206
190
150
mm
mm
mm
mm
free
free
free
free
free
space
space
space
space
space
Connections
Phase Connections
type
cage type terminals
cross section
5.2 x 5.2 mm
recommended conductor cross section 4 6 mm2
screw head
Pozidrive Combi No. 2
screw dimension
M4 x 15
screw head diameter
max. 5.6 mm
tightening torque
1.5 to 2 Nm
Landis+Gyr AG
3/6
RS232 Interface
type designation
type
pin assignment
CS Interface
type designation
type
.02/.42
RJ 12
1
2
3
4
5
6
CTS
TxD
GND
DTR
RxD
DSR
.40/.42/.43
screw type terminals
Other Connections
type
screw type terminals
max. current of voltage outputs
1A
max. voltage of control inputs
300 V
Material
RS485 Interface
type designation
type
pin assignment
1
Housing
The meter housing is made of polycarbonate which
is partly glass-fibre reinforced.
.03/.43
RJ 12
1
2
3
4
5
6
c (common ground)
a (data a)
b (data b)
b
a
c
Meter Dimensions (Standard Terminal Cover)
6.2
206
40
26
190
*)
281.5
75
150
177
*)
75
The height of the suspension triangle with extended hook is 230 mm. See also User Manual.
Landis+Gyr
4/6
Terminal Dimensions
13
5.2
16 10 10 10 10 10 10 10 10 10
Terminal Layout according to DIN 4-wire ZMG400
Communication
interfaces RS232/485
with/without CS
Control inputs and

output contacts
Voltage outputs
U1
U2
U3
N
Optical
separation
of phases
Upper part of
voltage inputs
displaced back
Voltage inputs
Current circuits
Terminal Layout according to DIN 3-wire ZFG400
Control inputs and

output contacts
Communication interfaces
RS232/485 with/without CS
Voltage outputs
Optical
separation
of phases
Upper part of
voltage inputs
displaced back
Voltage inputs
Current circuits
Landis+Gyr AG
5/6
Type Designation
ZMG
4 10
CR
4.26
.43
Network Type
ZFG
ZMG
3-phase 3 wire network (F-connection)

3-phase 4 wire network (M-connection)
Connection Type
3
4
Direct connection
Transformer connection
Accuracy Class
10
05
Class 1 (IEC), B (MID) ZMG310/410..

Class 0.5 (IEC), C (MID) ZMG405..
Measured Quantities
AR
CR
Active energy meter

Combi meter for active and reactive energy
Tariff Functions; Control Inputs/Output Contacts

1.xx
2.xx
3.xx
4.xx
Energy
Energy
Energy
Energy
x.00
x.02
x.26
x.44
no inputs/output contacts
2 output contacts
2 control inputs/6 output contacts
4 control inputs/4 output contacts
rates, externally controlled

rates, internally controlled with time switch
and demand rates, externally controlled
and demand rates, internally controlled with time switch
Special Functions
0
none
Further Functions
0
3
4
7
a
b
none
with software events
with hard- and software events
with load profile
with load profile and software events
with load profile and hard- and software events
Interfaces
00
02
03
40*)
42*)
43*)
none
with RS232
with RS485
with CS
with CS and RS232
with CS and RS485
*) Available for x.00, x.26, x.44 only
Data subject to change without notice.

Landis+Gyr AG
Feldstrasse 1
CH-6301 Zug
Switzerland
Phone: +41 41 935 60 00
www.landisgyr.com
Landis+Gyr AG
6/6

Công Tơ ZMG 400

Uploaded by

Copyright:

Available Formats

Công Tơ ZMG 400

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Công Tơ ZMG 400

Uploaded by

Copyright:

Available Formats

Electricity Meters IEC/MID

Maximal Current Imax

H 71 0200 0381 h en ZMG400AR/CR, ZFG400AR/CR Technical Data

Starting Current ZxG410xR

Starting Power in F-Circuit

Impermeability according to IEC 60529

1.0, 5.0 A/5.0 A

Minimum Current Imin

0.01, 0.05 A/0.05 A

Transitional Current Itr

0.05, 0.25 A/0.25 A

Maximum Current Imax

2.0, 6.0, 10.0 A/10.0 A

Fast Transient Burst Test

Radio Interference Suppression

Impulse Voltage 1.2/50s

Backup Time (Power Reserve)

Inputs and Outputs

Active and Reactive Energy

to DIN 61393/DIN 66259

H 71 0200 0381 h en ZMG400AR/CR, ZFG400AR/CR Technical Data

Weight and Dimensions

Meter Dimensions (Standard Terminal Cover)

H 71 0200 0381 h en ZMG400AR/CR, ZFG400AR/CR Technical Data

Terminal Layout according to DIN 4-wire ZMG400

Control inputs and

Control inputs and

H 71 0200 0381 h en ZMG400AR/CR, ZFG400AR/CR Technical Data

3-phase 3 wire network (F-connection)

Class 1 (IEC), B (MID) ZMG310/410..

Active energy meter

Tariff Functions; Control Inputs/Output Contacts

rates, externally controlled

*) Available for x.00, x.26, x.44 only

Data subject to change without notice.

H 71 0200 0381 h en ZMG400AR/CR, ZFG400AR/CR Technical Data

You might also like