Jost Catalogo INGLES

JOST AUSTRALIA PTY LTD
A.B.N. 60 001 081 778
Jost Australia Pty Ltd is a Quality Endorsed Company (QEC Lic. 10166), and complies to AS/
NZS ISO 9001:2000 for the following capability:
The registration covers the Quality Management System for the assembly and fitting of
equipment for the truck and trailer industry including fifth wheels, landing gear systems,
turntables, towing gear, hubodometers, mounting plates and associated replacement
parts and accessories; the distribution of hydraulic hoists, pumps, valves, spare parts
and accessories to the truck, industrial trailer.
OPERATING INSTRUCTIONS, REPAIR MANUALS, & MAINTENANCE INSTRUCTIONS
Selected Operating Instructions, Repair Manuals and Maintenance Instructions, which

are referred to or appear in this catalogue, are applicable to the genuine product as
manufactured/supplied by Jost Australia.
Where applicable, each product complies with the requirements of the Australian Design
Rules (ADRs) 62/01, and the corresponding Component Registration Number (CRN) is
detailed on the Jost Australia CRN List at the front of this catalogue.
For any enquires regarding Jost CRNs, please contact your local Jost Australia branch.
8/08
Jost Australia Pty. Ltd.

Toll Free Sydney 1800 811 487
www.jostaustralia.com.au
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Component Registration
Numbers (CRN)
Note: All D-values have been transcribed directly from the original Component Test Reports.
(Current from 14th April 2003)
JOST FIFTHWHEELS
Product Stock No
CRN & D-Value Specification
JSK 32 AV
26278
D-Value: 160 kN
JSK 36 D2
24501
D-Value: 171 kN
JSK 36 DV 1
26277
D-Value: 170 kN
JSK 36 CV
16358
D-Value: 190 kN
150mm, 170mm, 185mm, 250mm & 300mm pedestals
JSK 37 CZ
24286
D-Value: 190 kN
JSK 37 E
36821
D-Value: 190 kN
(Same plate construction as JSK37CZ, but with pivot pedestals)
JSK 37 EW
36821
D-Value: 190 kN
JSK SLE 37E
36820
D-Value: 190 kN
JSK 37 CZW
(Greaseless version of JSK 37 CZ)
24286
D-Value: 190 kN
JSK 37 G-240
24500
D-Value: 162.4 kN
JSK 38 C - 1
24329
D-Value: 260 kN
JSK 38 C - 2
16913
D-Value: 216 kN
JSK 38 D
36688
D-Value: 260 kN
JSK 38 G - 1
24327
D-Value: 260 kN
JSK 38 G - 2
16917
D-Value: 216 kN
JSK 50
24502
D-Value: 300 kN
JSK 36 AV2
24497
D-Value: 162.4 kN
JSK 42ZJ
36130
D-Value: 200 kN
JSK 42WJ
36130
D-Value: 200 kN
LP 36 CV
24835
D-Value: 190 kN
LP 37 C-Z
24836
D-Value: 190 kN
LP 37 E
24833
D-Value: 162.4 kN
LP 37 G-240
24831
D-Value: 162.4 kN
LP 38 C-1
24837
D-Value: 190 kN
LP 38 C-1-2
24834
D-Value: 190 kN
DH 200 - Dual Height Fifthwheel
26983
D-Value: 120 kN
DR 36 CV
24832
D-Value: 162.4 kN
DR 37 C-Z
24842
D-Value: 162.4 kN
DR 37 E
24840
D-Value: 162.4 kN
DR 37 G-240
24839
D-Value: 162.4 kN
DR 38 C-1
24843
D-Value: 260 kN
DR 38 C-1-2
24841
D-Value: 216 kN
DR 38 DV 90
36819
D-Value: 260 kN
EV M Slider
26167
D-Value: 190 kN
(Greaseless version of JSK 37 E)
(max height: 290mm, min height: 165mm)
For use with JSK 36 CV/150 with EV M Slider
EV M Slider
26169
D-Value: 190 kN
For use with JSK 37 CZ/150 with EV M Slider
EV P Slider
26168
D-Value: 190 kN
For use with JSK 36 CV/150 with EV P Slider
EV P Slider
26170
D-Value: 190 kN
For use with JSK 37 CZ/150 with EV P Slider
SO 36 CV
24844
D-Value: 162.4 kN
SO 37 C-Z
24845
D-Value: 162.4 kN
SO 37 E
24838
D-Value: 162.4 kN
8/08

1
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Component Registration
Numbers (CRN)
JOST KINGPINS
Product Stock No
KZ 1008, KZ 1010, KZ 1012, KZ 1012-16
24156
D-Value: 190 kN
KZ 0912/01 (Part of the KZ 0908 Assembly)
FEA Approved **
24857
D-Value: 108 kN
KZ 1516
FEA Approved **
24344
D-Value: 162.4 kN
KZ 1016
24292
D-Value: 280 kN
KZ 1116
24511
D-Value: 287 kN
KZ 1408, KZ 1410, KZ 1412
FEA Approved **
24811
D-Value: 162.4 kN
KZ 1416
FEA Approved **
24812
D-Value: 200 kN
KZ 1706, KZ 1707, KZ 1710, KZ 1712
FEA Approved **
24856
D-Value: 152 kN
BUYERS PINTLE HOOKS

Product Stock No
BDB 1394
37264
D-Value: 165 kN
BPC PH 15 WMK
37267
D-Value: 75 kN
BPC PH 20 WMK
37268
D-Value: 100 kN
BPC P 45 AC4 & BPC P 45 AC6
37266
D-Value: 165 kN
BPC BH 850 MM
37265
D-Value: 30 kN
BPC PH 8 WMK
37270
D-Value: 50 kN
BPC PH 5 WMK
37269
D-Value: 35 kN
ROCKINGER COUPLING
Product Stock No
RO-500
-Rockinger Coupler
28986
D-Value: 260 kN
(At ZERO download)
JOST & ROCKINGER TOWING EYES

Product Stock No
ROCK 57374
ROCK 57394 (50mm Weld-In)

(Replaces Jost ZO 46)
24527
D-Value: 120 kN
24529
D-Value: 314 kN
(Replaces Jost ZO 60/01)
29201
D-Value: 191 kN
ROCK 57272 (50mm Weld-In)
29202
D-Value: 191 kN
ROCK 57254 (50mm)
29201
D-Value: 191 kN
ROCK 57322 (50mm)
** Finite Element Analysis (FEA) has been approved for Kingpins by the Austrailian Standards
Committee (Refer: Supplement 1-2002 to AS 2175-1995) as an alternative to physical testing.
8/08

2
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Ball Bearing
turntables
Slewing rings
Ball bearing turntables

Series L and N
L-series = for farm carts and trailers with a speed up to 30 km/h (18m.p.h.).
N-series = for heavy farm carts and light truck trailers with a speed above 30 km/h (18 m.p.h.).
Type
B C D
G H
mm
mm
mm
mm
mm
mm
mm
mm
Weight
approx. Axial Load
kg
kN
KLK 400 L
KLK 500 L
KLK 650 L
KLK 750 L
KLK 850 L
KLK 950 L
KLK 1050 L
400
500
650
750
850
950
1050
342
442
592
692
792
892
992
292
392
542
642
742
842
942
230 375
330 475
480 625
580 725
680 825
780 925
880 1025
260
360
510
610
710
810
910
8
8
8
8
8
8
8
45
45
45
45
45
45
45
11
15
20
23
27
30
34
7,5
9
15
18
25
30
35
KLK 500 N
KLK 650 N
KLK 750 N
KLK 850 N
KLK 950 N
KLK 1050 N
500
650
750
850
950
1050
437
587
687
787
887
987
384
534
634
734
834
934
315 475
465 625
565 725
665 825
765 925
865 1025
340
490
590
690
790
890
8
8
8
8
8
8
52
52
52
52
52
52
17
23
28
32
36
40
18
25
30
35
40
45
Slewing rings are supplied undrilled and primed in black for corrosion protection.
The measurements are subject to our standard tolerances.
For the turntables of the N series the load limits are only valid for operation on paved
roads and under conditions prevailing in Europe.
The axial load can be exceeded by 30 to 50% on the turntables of the N series if the speed
is below 30 km/h (18 m.p.h.).
See reverse for fitting and maintenance instructions.
The right to alter specifications is reserved.

8/08

5
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Fitting and maintenance

Instructions for L and N series

1. The ball bearing turntable must be mounted
on a completely flat (max. unevenness 1mm)
and horizontally and vertically rigid base with
at least 50% of the circumference adequately
supported. Particular attention should be paid
to the support of the web section area containing
the ball bearing races. Any unevenness under
the flanges can be corrected with metal strips or
by filling in with plastic metal.
2. Each flange must be attached with a minimum of 8
high tensile bolts grade 8.8, preferably M 10 x 1,25
(3/8 - 24) or M 12 x 1,5 (7/16-20) for sizes below
650 mm (25 5/8) dia. 4 to 6 bolts are adequate.
In case of operation under adverse conditions,
we recommend the use of bolts with enlarged
contact surface (such as Tensi Lock or Verbus
Ripp), or to increase the number of bolts.
The thickness of paint between turntable and
frame should not exceed 50mm to guarantee the
fit to be friction-tight.
3. To ease the shear load on the mounting bolts
at least four blocks should be welded on
immediately adjoining each flange. The ball
bearing turntable must not be mounted by
means of welding.
4. JOST turntables are lubricated with a lubricant

suitable for the type of operation and the adherent
operating conditions before they leave the factory,
however, the turntable must be adequately
re-lubricated with high quality ball bearing grease
(lithium saponified, NLGI class 2) before the trailer
is put into operation for the first time. The relubrication should build up a collar of grease in
the gap between the 2 rings of the turntable thus
preventing ingress of grit and water into the ball
races.
5. The ball bearing turntable must be lubricated
according to use but at least once a month with a
lubricant suitable for the type of operation and the
adherent operating condition (lithium saponified,
NLGI class 2). While lubricating the A-frame
should be turned so that the grease is evenly
distributed and a collar of grease is being built up
in the gap between the 2 rings. The tightness of
the mounting bolts should also be checked.
6. Ball bearing turntables are subject to wear. The
limit of wear is reached when there is 2,5 mm axial
play. This is the case at the very latest when the
air gap X=1 mm at any point on the circumference
of the turntable.
8/08

6
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Ball bearing turntables

Series HE and SO
for drawbar trailers and special trailers
Type
*HE 5
HE18-1000
A
mm
880
1000
B
mm
895
1008
C
mm
783
886
D
mm
762
859
E
mm
852
960
F
mm
866
974
G
mm
9
10
H
mm
80
90
d
mm
16
-
Weight
Axial load
approx.kg
kN
43
50
63
80
SO1000-24
*SO1100-24
987
1095
1000
1108
871
979
844
952
952
1060
966
1074
10
10
90
90
18
72
82
120
160
KLK HE 1200-22
1200
1211
1086
1059
1160
1174
10
90
18
76
130
Note: SO1000-24 used in SO assembly

Ball bearing turntables are supplied undrilled.
*drilled and primed in black for corrosion protection.
The above axial loads are applicable if the slewing ring is mounted to the front axle of the trailer with three/four
axles at speeds of up to 105 km/h (65 mph).
They can be exceeded by 10% for full trailers with two axles.
In case of speeds below 30 km/h (18 mph) the axial loads can be exceeded by 20%.
If required axial loads exceed the data permitted for turntables of series HE/SO, please ask for slewing rings of
series KDL 900, which allow axial loads up to 250 kN.
In case of use above the steered axle and above the fifth wheel on semi-trailers with rear axle steering please
enquire as to the load data giving details of the vehicle.
The load limits are only valid for operation on paved roads and under conditions prevailing in Europe.
See reverse for fitting and maintenance instructions
The right to alter specifications is reserved
8/08

7
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

HE + SO

1. The ball bearing turntable must be mounted on
a completely flat (max. unevenness 1mm) and
horizontally and vertically rigid base with at least
50% of the circumference adequately supported.
Particular attention must be paid to the support of the
web section area containing the ball bearing races.
Any unevenness under the flanges can be corrected
with metal strips or by filling in with plastic material.
2. Each flange must be attached with at least 8 high
tensile bolts, M 16 x 1,5 of grade 8.8. Do not drill in
the area of the type plate ball insertion hole which
should be at less than 30 to the direction of travel.
In case of operation under adverse conditions, we
recommend the use of bolts with enlarged contact
surface (such as Tensi Lock or Verbus Ripp), or to
increase the number of bolts from 8 to 12 per flange.
This applies in particular to type HE1300-22 The
thickness of paint between turntable and frame should
not exceed 50 mm to guarantee the fit to be friction-tight.
3. To ease the shear load on the mounting bolts at
least four blocks should be welded on immediately
adjoining each flange. The ball bearing turntable
must not be mounted by means of welding.
4. JOST ball bearing turntables are suitably lubricated
before they leave the factory, Before the trailer is
put into operation for the first time, however, they
should be re-lubricated with a high quality lithiumsaponified turntable grease of NLGI class 2 through
all the grease nipples. The re-lubrication should build
up a collar of grease in the gap between the 2 rings of
the turntable thus preventing ingress of grit and water
into the ball race.
If a central lubrication system is to be used the
quantity of lubrication nipples should be increased
(please specify when ordering) and the above
mentioned grease specification observed, however
NLGI consistency class min 1.
5. The ball bearing turntable must be lubricated

according to use but at least once a month with
a high quality lithium saponified turntable grease
of NLGI class 2. lubricant suitable for the type of
operation and the prevailing operating conditions.
While lubricating the A-frame should be turned so
that the grease is evenly distributed and a collar of
grease is being built up in the gap between the 2
rings.The tightness of the mounting bolts should
also be checked.
6. Ball bearing turntables are subject to wear. The limit
of wear is reached when there is 3,5 mm axial play.
This is the case at the very latest when the air gap
X = 0 mm at any point on the circumference of the
turntables.
Drilling pattern for ball bearing turntables
8/08

8
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Slewing ring
Series KDL 900/6W
Low Profile Ballrace Models
Type
KDL 900-1
KDL 900-2
KDL 900-3
KDL 900-4
KDL 900-5
* KDL 900-6W
KDL 900-7
oE
mm
mm
mm
mm
mm
mm approx.mm approx.mm approx.kg
520
650
750
850
950
1050
1200
409
539
639
739
839
939
1089
412
542
642
742
842
942
1092
302
432
532
632
732
832
982
490
620
720
820
920
1020
1170
332
462
562
662
762
862
1012
371
501
601
701
801
901
1051
451
581
681
781
881
981
1131
Weight
Axial
load
25
32
38
44
50
56
65
kN
40
80
120
150
180
210
250
Model
* KDL 900-6W Supplied Pre-Drilled
Typical applications: Fridge Vans
Stock Crate
D-Value Rating:
190kN
Slewing rings are supplied primed for corrosion protection.

Material C45.
Ball race hardened.
8 conical lubrication nipples AM 8 x 1 according to DIN 71412.
The above axial loads are applicable if the slewing ring is mounted to the front axle of a trailer
at speeds of up to 105 km/h (65 m.p.h.). If it is to be used in self steering systems or above
a fifth wheel please contact us for the maximum permissible loads by submitting construction
data.
8/08

9
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Slewing rings KDL 900/6W

1. The slewing ring must be mounted on a completely flat
(max. unevenness 1mm) and rigid base with at least
50% of the circumference adequately supported.
Particular attention must be paid to the support of
the web section area containing the slewing ring
races. Any unevenness under the flanges can be
corrected with metal strips or by filling in with plastic
metal.
operation for the first time however they must be

adequately re-lubricated with ball bearing grease
(lithium saponified, NLGI class 2). Whilst lubricating
the slewing ring should be turned so that the grease
is evenly distributed. If a central lubrication system
is to be used we recommend increasing the number
of grease nipples (please state on order) and using a
high quality lithium saponified ball bearing grease of
at least NLGI class 1.
2. Each flange must be attached with at least 12 high

tensile bolts M 16 x 1,5 of at least grade 8.8. Do
not drill in the area of the ball insertion hole, which
should be at less than 45 to the direction of travel.
5. The slewing ring must be lubricated according to

use but at least once every 3 months or 25,000
km, using a high quality ball bearing grease (lithium
saponified, NLGI CLASS 2). Whilst lubricating the
A-frame should be turned so that the grease is
evenly distributed .
The thickness of paint between slewing ring and

mounting should not exceed 50 microns to guarantee
the fit to be friction-tight.
3. To ease the shear load on the mounting bolts in the
case of horizontal force at least 4 blocks should be
welded on immediately adjoining each flange. The
slewing ring must not be mounted by means of
welding.
4. JOST slewing rings are initially lubricated before
they leave the factory. Before they are put into
The tightness of the mounting bolts should also be

checked at regular service intervals.
6. Slewing rings are subject to wear. The limit of wear
is reached when the axial play is 3.5 mm. This is at
the latest the case when the distance X < 8 mm at
any point on the circumference.
Wear Limits
Radial play - max. 3.0mm
Axial play - max. 2.5mm
8/08

10
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Double Row Ballrace

Model: DK 90/14
Type
mm
mm
mm
mm
mm
mm
mm
mm
approx. kg
DK 90/14 987 1000 871
834
952
966
10
90
72
14
Weight Axial load
*Note: This ballrace comes undrilled.
Typical Application:
Dairy Tankers
Sludge Tankers
Tri axle Tipping
Trailers
D-value 162.4 kN
BPW turntables are equipped with
supporting and retaining ball races
between the upper and lower rings.
The axial forces on the turntables
are accepted vertically via the large
supporting ball bearings.
The horizontal tensile and
compressive forces incurred are
accepted by the smaller retaining
ball bearings.
The moment forces resulting from

braking and centrifugal forces,
are mutually accepted by the
supporting and retaining ball
bearings.
The retaining ball bearings connect
the upper and lower turntable rings.
The design principle ensures
maximum reliability because the
active axial and radial forces are
distributed between the two ball
races of BPW turntables.
The ball races are permanently
protected against dirt and dust by
a multi-lip seal.
8/08

11
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Double Row Ballrace

8 Hole
Drilling Pattern
for DK90/14
Upper ring
Lower ring
Design and fitting

instructions
max. axial
The
load (see table)
is the static axial
load acting on the
turntable. This
value is valid in the
direction of force
only for vehicles
with speeds up to
105 km/h. A 25%
increase of axial
load is permissible
for vehicles with
speeds up to
30 km/h. The
code number,
manufacturing
details, type of
turntable and the
permissible axial
load are stamped
into the type plate.
support
The
construction of the
lower and upper
rings must be
levelling and has to
be free of torsion
because otherwise
deformation can
occur during
use which will
endanger the
operational
dependability. The
Service
and maintenance
unevenness of
the supporting
surfaces should
not exceed 1 mm.
Larger uneven
areas must be
compensated. The
supporting surface,
when divided into
at least 4 surface
areas of equal
size around the
circumference,
must support at
least 50% of the
turntable flanges.
being bolted
After
together, the
turntable flanges
must be additionally
secured at the top
and bottom by
at least 4 welded
plates (stoppers).
This prevents
displacement so
that the active
forces are not
solely absorbed
by the connecting
bolts.
turntables. If retrodrilling work is

necessary, drilling
chippings and
cooling fluids must
not be allowed to
penetrate the ball
races.
the turntables
As
are only slightly
lubricated when
supplied, they
must be lubricated
with BPW special
longlife grease
ECO-Li 91 (lithium
complex grease)
via the grease
nipples prior to
initial operation.
are
turntables
not suitable for
applications where
multiple rotational
movements in
excess of 360
occur.
turntable
The
bearing is to be
lubricated via the
grease nipples with
special longlife
grease ECO-Li 91
(lithium complex
grease) every
25,000 km, but at
least after every
3 months (or after
every 2 - 3 weeks
under extreme
operational
conditions). The
grease must not
be mixed with
other (calciumbase or sodiumbase) lubricants.
screw
Allconnections
are
to be inspected at
regular intervals
for tightness
and tightened if
necessary.
Limits
Wear
Radial play max. of 2.0mm
Axial play max. of 3.0mm
recommend
We
the installation of
drilled
8/08

12
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
13
Fifth wheel couplings

2
14
Operating and maintenance

instructions
STOP
DRIVERS ensure that you get a
when coupling!
Diagram 1
Diagram 2
Failure to ensure that trailer rubbing plate is set below the fifthwheel plate when coupling
up could result in loss of your trailer or damage to your truck or trailer.
Regardless of whether you have air or spring suspension, ALWAYS follow the coupling
CODE to ensure the king pin is securely engaged with the fifthwheel.
This following coupling CODE is issued by JOST Australia Pty Ltd.
THE COUPLING CODE

The fifthwheel must be angled down to the rear of the
truck and the mechanism in the pre-set position.
Ensure that the trailer rubbing plate is below the height
of the fifthwheel plate (refer Diagrams 1 and 2).
Reverse the truck slowly under the trailer, aligning the
king pin with the centre of the fifthwheel.
Continue reversing until the mechanism locks and
secures the king pin.
Pull forward against the trailer brakes to ensure
engagement of the king pin in the fifthwheel.
Visually check to see that there is no gap between the
fifthwheel plate and trailer rubbing plate and that the king
pin is secured correctly within the fifthwheel mechanism.
Diagram 3
Finally, ensure that the automatic secondary locking

device is engaged (as per Diagram 3). If it is not
engaged, the whole coupling up procedure must be
repeated.
Failure to read, understand and follow the important information contained above
may result in a hazardous condition or cause a hazardous condition to develop.
8/08

15
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Operating and maintenance

instructions
NOTICE TO ALL DRIVERS

GREASELESS FIFTHWHEELS
THE COUPLING CODE
The fifthwheel must be angled down to the rear of the truck and the
mechanism in the pre-set position.
Ensure that the trailer rubbing plate is level with the height of the fifthwheel
plate (refer Diagrams 1 and 2).
Reverse the truck slowly under the trailer, aligning the king pin with the
centre of the fifthwheel.
Continue reversing until the mechanism locks and secures the king pin.
Pull forward against the trailer brakes to ensure engagement of the king pin
in the fifthwheel.
Visually check to see that there is no gap between the fifthwheel plate and
trailer rubbing plate and that the king pin is secured correctly within the
fifthwheel mechanism.
Finally, ensure that the automatic secondary locking device is engaged
(as per Diagram 3). If it is not engaged, the whole coupling up procedure
must be repeated.
8/08

16
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Locking device
Locked with spring hook

closed
Set for coupling
Automatic setting to couple up

Fully adjustable wear
Easy maintenance
Type of mounting
E=
Pivot bearing mounting

Slack and maintenance free.
Oil and grease resistant
C=
Rubber mounting
Shock absorbing by large rubber pads.
Slack and maintenance free.
8/08

17
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
New top plate liner installation to the

JOST low maintenance fifth wheel type JSK37CW + JSK37EW
In order to make the assembly and removal of the exchangeable top plate liner easy we
will introduce an improvement to the above mentioned fifth wheel.
In future the bolt SKT001006000 will be used instead of the mounting kit (bolt with counter
nut) SK3121-062.
By using the new bolt it is no longer necessary to use the counter nut on the under side of
the fifth wheel plate and therefore the exchange of the liner is obviously simplified.
At the same time the contact for the assembly tool was changed from hexagon socket
6mm to hexalobular ISO10664-45. The exchanged of seized screws will be improved by
using this system.
The holes on the liner were adapted to the new bolt. The exchangeability is guaranteed
when the liner and bolts in this new form are used. This means, the old liner cannot be
used with the new bolt and vice versa.
The spare parts numbers have been changed as follows:
Repair-kit compl.
Old
SK 3106-006
New
SK 3106-007
Screw
SK 3121-062
SKT001006000
Top plate liner, right
SK 3105-129R (10mm)
SK 3105-130R (10mm)
Top plate liner, left
SK 3105-129L (10mm)
SK 3105-130L (10mm)
Tightening torque of the

screw
20Nm
45Nm
The assembly instructions will be enclosed with each spare part.

The change will be valid from October 2003.
8/08

18
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
SK 3106-007
Mounting Instructions
Old
New
8/08

19
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Low maintenance fifth wheel couplings

JSK 37
Coupling code, selection criteria, maintenance,
mounting instructions and user information
for the top plate liner
Mounting instructions for complete top plate liners

SK 3106-004 and SK 3106-006
Liner old version
SK 3106-004
(4 bolts on each side)
up to serial 27 i.e. Serial no.: xx27xxxxxx
Liner new version

SK 3121-062
SK 3106-007
Tightened
to 45Nm
(6 bolts on each side)
as from serial 29 i.e. serial no.: 0629xxxxxx
Liner
Fifth wheel plate
Counter nut
Tightened to 20 Nm
Protecting edge
Limit of wear for liner
User information
General
The supporting area of the fifth wheel is fitted with a replaceable top plate liner, which is
maintenance free apart from intermittent cleaning. A thin layer of grease on the liner will
have no adverse effect, i.e. there is no problem in coupling up trailers with greased skid
plate.
In order to avoid damage during the coupling up manoeuvre there is a raised edge at the
point where the skid plate moves onto the top plate liner. Wear on this edge is normal
and does not affect the life expectancy of the liner.
The front edge of the skid plate must be rounded or chamfered, so that it does not
damage the liner during the coupling up manoeuvre. The surface must be smooth
with no protruding edges, burrs must be removed.
The plastic liner has a higher expansion coefficient than steel. If exposed to direct
sunlight, a certain deformation is therefore inevitable. It does not however have any
negative effect on its function or on the life expectancy.
After cooling down it will return to its original shape.
Control for wear
The liner must be regularly checked for wear and damage according to its usage, at the
latest 50,000 Km or six months. When replacing the bolts must be tightened to a torque
of 20Nm, or 45Nm for part no SKT001006000. The liner must be replaced when the
surface has worn down to the upper level of the fixing bolts.
Information About waste disposal
After having been cleaned the used top plate liners can be disposed of with normal
household waste, or recycled.
Material: See identification on the liner
8/08

20
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Low maintenance fifth wheel couplings

JSK 37
Selection criteria, maintenance,
mounting instructions and user information
for the top plate liner
Coupling Code
The fifth wheel must be angled down to the rear of the tractor and the mechanism in the present condition.
Ensure that the trailer rubbing plate is level with the height of the fifith wheel plate. Reverse the tractor
slowly under the trailer aligning the king pin with the centre of the fifth wheel.
Continue reversing until the mechanism locks and secures the king pin. Pull forward against the trailer
brakes to ensure engagement of the king pin in the coupling.
Visually check to see that there is no gap between the fifth wheel plate and the trailer rubbing plate and
that the king pin is secured correctly within the fifth wheel mechanism.
Ensure lock catch is secured in the locked position.
Selection criteria
The main characteristics of the Jost low maintenance fifth wheel coupling JSK 37 are there excellent
sliding properties (equivalent to a well lubricated fifth wheel) and their long life.
The fifth wheel was designed in particular for articulated vehicles with high mileage which are rarely
uncoupled and run for long periods between services, e.g. tankers and tilts.
This high quality, low maintenance fifth wheel will offer you a long life span if you
-
Couple up carefully: the fifth wheel should be at the same height as the skid plate
(air suspension vehicles are advantageous)
Make sure that the skid plate resp. guide rails to the skid plate are the correct size.
They should have no sharp edges, steps or welding seams in the coupling up area.
Ensure a flat, smooth surface of the skid plate and contact area.
Grease the skid plate lightly to protect it from corrosion. The liner is not adversely
affected by grease.
if these points are not observed the liner may be damaged.

Articulated vehicles with more complex load requirements (e.g. on building sites) and/or semi-trailers with
rigid chassis (e.g. tankers) are liable to increase wear on the liner.
The liner is bolted onto the fifth wheel and can be easily replaced.
Maintenance of the locking mechanism
Lubrication of the liner is not necessary.
The fifthwheel has only one lubrication point for the lock jaw.
Uncouple at the latest every 50,000 Km or six months, depending on usage. Clean
the fifth wheel with liner and the skid plate. Check the liner for damage and wear.
Lubricate the lock jaw and king pin with high pressure grease (EP) with MoS2 or
graphite additive (e.g. L21M,Esso universal grease M or Shell Retinax AM).
The grease nipple on the edge of the fifth wheel plate is for lubricating the lock jaw and king pin between
service.
The life expectancy of the lock jaw and king pin depend on effective lubrication
before being put into service and after every cleaning operation.
For further information please refer to the jost repair instruction booklet.
8/08

21
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Fifth wheel coupling 2

Spherical mounting
Type JSK 32 AV
e
l
b
a
il
Type JSK 32 AV
with
ith 6 h
hole
l d
drilling
illi pattern
tt
according to DIN standard
e
g
a
v
rA
o
N
n
o
L
Lock jaw and wear ring can be changed

cha
without difficulty in a few minutes with
the fifth wheel still in position.
Spherical mounting.
Suitable for all types of rear axle steers
ing systems.
CRN
26278
Imposed load
12000 kg
Total weight of outfit 32000 kg
D-value
160 kN
Weight approx. 110 kg
Type approval number
(Germany)
F 3117
(Netherlands)
RDW 1601 0251
Mounting hole pattern in accordance with
DIN standard 74081 and ISO standard 3842.
Mounting height 185 mm or 150 mm.
The above loads apply to operation on ordinary roads and ordinary operating conditions as they are to
be found in Europe. If the fifth wheels are being operated in other territories or under other conditions we
would ask you to contact us regarding the type of fifth wheel to be used.
Mounting must be carried out in accordance with our instructions.
8/08

22
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for type

JSK 32 AV
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
12
13
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Lock jaw
Lock jaw spring
Pivot complete
Locking bar
Pivot
Lever
Operating handle
Head bolt
Double tension spring
Wear ring
Socket head bolt
Pedestal 185 mm, 6 holes
Outer ring
Inner ring
Seal
Spring washer
Bolt complete with item 17
Split pin
Spring hook
Grease tube
Grease nipple complete
Adjusting screw
Hexagon nut
Guide piece
Eye bolt complete
Repair Kits
Repair kit for locking device
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
Repair kit for spherical joints
SK 2121-53
1,2,3,10,11
1,2,3
1,2,3,8
10,11,20
14,15,16,18
1489
847
2122-05
3205-06
3221-01
3205-01
3205-04
1513
3105-20
2105-19
2121-07
2104-03
2104-04
2104-16
2104-17
803-2
803-1
809-1
1428
870-1
1974
2921-06
3205-09
1976
3205-08
2121-78
3205-07
2122-04
SK 3221-50
SK 3221-52
SK 3221-68
8/08

23
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Central Lubrication
for 2 Fifth Wheels
Models JSK 37 Series
The fifth wheels JSK 37 CZ and JSK 37 E Series are supplied with
additional lubrication for the lock jaw and the king pin.
In order to connect the fifth wheels to the central lubrication system of
the prime mover it is necessary to replace the 4 grease nipples under the
fifth wheel plate and the 2 at the side with suitable screw couplings and
connect them to flexible tubing, which is in turn joined up to a distributor
unit compatible with the respective central lubrication system.
As a lubricant we recommend grease or liquid grease. Fifth wheels with
central lubrication should be thoroughly cleaned and inspected for wear,
damage and correct functioning at least once a year, or at the latest after
50,000 km, and repaired if necessary. Before coupling up again the fifth
wheel and the king pin should be manually lubricated with high pressure
grease (EP) with MoS2 or graphite additive.
8/08

24
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Wear Limit Gauge

King Pin Gauge
Above item is designed as a NO GO wear limit indicator, for either 50mm or

90mm king pins.
Once king pin can pass through gauge the king pin must be replaced.
Also designed to check king pin protrusion.
8/08

25
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Type JSK 36AV2
e
l
b
a
il
a
v
A
r
e
g
n
o
L
o
Application: Tipper Work

Available with fabricated weld on Pede
Pedestals
upon request.
Rubber cushioned pivot bearings.
Wearing ring easy to remove from abo
above.
Gross comb. weight
115000 kgs
D-value
190kN
Weight approx.
(for 150mm bolt on feet height)
157 kgs

Mounting must be carried out in
accordance with our instructions.
Type
JSK
JSK
JSK
JSK
JSK
JSK
JSK
JSK
JSK
36
36
36
36
36
36
36
36
36
AV2
AV2
AV2
AV2
AV2
AV2
AV2
AV2
AV2
Overall
Height
mm
Imposed Load
On Tractor
kg
D-Value
kN
Weight
Approx.
kg
130
150
170
185
195
205
215
235
255
20000
20000
20000
20000
20000
20000
20000
20000
20000
190
190
190
190
190
190
190
190
190
123.50
123.50
125.00
128.50
130.00
131.50
132.00
133.50
136.50
130
150
170
185
195
205
215
235
255
Pedestal
Style
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
on
on
on
on
on
on
on
on
on

26
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

type JSK 36AV2
15
10
14
11
12
13
19
25
24
20
21
22
26
abcdefghi
12
2
1
3
5
4
23
17
18
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17a
18
19
20
21
22
23
24
25
26a
26b
26c
26d
26e
26f
26g
26h
26i
Lock jaw
Lock jaw spring
Pivot complete
Locking bar
Pivot complete
Release lever
Operating handle
Head bolt
Wearing ring
Socket head bolt
Split pin
Spring hook, chain
Grease tube
Rubber bushing for bolt on feet
Swivel pin
Stop
Stop for swivel pin
Washer with tap
Hexagon screw
Adjusting screw
Plug
Split pin
Fabricated Pedestals 130
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
2105-15
847
2121-13
2106-31
2122-25
2105-01
2105-07
1513
2105-11
2105-19
2121-07
1790
1436
2105-28
1976
2905-20
2106-18
2106-24
2106-23
2521-20
2521-17
2121-76
2122-08
2921-04
2920-130
2920-150
2920-170
2920-185
2920-195
2920-205
2920-215
2920-235
2920-255
Item
Designation
Order No.
1, 2, 3, 10, 11
1, 2, 3
Repair kit for lock

Repair kit for lock
SK 2121-50
SK 2121-52
8/08

27
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Pivot-bearing
Type JSK 36DV1

Pressed Steel
Rubber cushioned pivot bearings
Application: General Freight

Tipper work
For use with single trailers and B Double
(not Road Train)
D-value
170kN
CRN
26277
Weight approx.
136kg (bolt on feet)
(for 150mm height)
Available with Fabricated-weld on Pedestals
upon request.

Type
JSK 36 DVI 130

JSK 36 DVI 150
JSK 36 DVI 170
JSK 36 DVI 185
JSK 36 DVI 195
JSK 36 DVI 205
JSK 36 DVI 215
JSK 36 DV1 235
JSK 36 DV1 255
Overall
Height
mm
Imposed Load
On Tractor
kg
D-Value
kN
Weight
Approx.
kg
130
150
170
185
195
205
215
235
255
20000
20000
20000
20000
20000
20000
20000
20000
20000
170
170
170
170
170
170
170
170
170
112
115
118
118
120
122
125
125
127
Pedestal
Style
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
on
on
on
on
on
on
on
on
on

8/08

28
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

type JSK 36DV1
Item Designation
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
Order No.
Socket head bolt

Wearing ring
Split pin
Spring hook
Adjusting screw
SK 2121-07
SK 2105-19
SK 1974
SK 1436
SK 2700-44
SK 2905-51
Clamping pin
000.003.027
Hexagon bolt, compl. SK 3521-03
Spring noose, compl. SK 2921-30
Latch, compl.
SK 3121-52
Tension spring
SK 847
Bolt
SK 2106-67
Lock Jaw
SK 1489
Double tension spring SK 3105-20
Locking bolt
SK 2905-06
Lever
SK 2105-01
Bar bolt, compl.
SK 2921-02
Hexagon bolt, compl. SK 1513
Handle
SK 2905-01
(standard version)
SK 2905-111
Quantity
per JSK
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Item Designation
Order No.
20a
20b
20c
20d
20e
20f
20g
20h
20i
21
22
23
24
24a
25
26
27
28
29
30
SK 2920-130
SK 2920-150
SK 2920-170
SK 2920-185
SK 2920-195
SK 2920-205
SK 2920-215
SK 2920-235
SK 2920-255
SK 2905-20
SK 2921-04
SK 2921-24
SK 2905-53
SK 2904-99
JS 1101-12
SK 2921-038
SK 2905-106
SK 3521-02
SK 2421-50
SK 3105-113

Rubber bushing, compl.
Split pin
Pivet pin with 22 + 25
Pivet pin
Pivet pin with 25
Plug
Hexagon bolts, compl.
Locking bar
Latch cord, compl.
Hexagon bolt, compl.
Handle
Quantity
per JSK
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
1
1
1
1
Repair and retrofit kits
Item
01, 02, 10, 11, 12
01, 02
10, 11, 12
01, 02, 04, 10, 11, 12, 17
Designation
Repair kit for lock
Repair kit for lock
Repair kit for lock
Repair kit for lock
Order No.
SK 3221-50
SK 2121-51
SK 3221-52
SK 3121-50
Item
01, 02, 10, 11, 12, 17
07, 08, 09
28, 29, 31
Designation
Repair kit for lock
Repair kit for lock
Handle extension, compl. from xx89xxxx
Order No.
SK 3121-51
SK 3121-52
SK 2921-031
8/08

29
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Rubber mounting
Type JSK 36 CV
with wear ring
Application: Tanker
General freight
Fridge van
B-double & Road train.
Chassis Tippers
Wear ring is easy to remove from above.

Shock absorption large rubber pads.
(Oil and grease resistant)
Gross comb. weight
135000 kgs
D-value
190kN
Weight approx.
(for 150mm Height)
Type
Overall
Height
mm
Imposed Load
On Tractor
kg
D-Value
150
170
185
250
300
20000
20000
20000
20000
20000
JSK 36 CV/150
JSK 36 CV/170
JSK 36 CV/185
JSK 36 CV/250
* JSK 36 CV/300
* Non Weldable Pedestals
157 kgs
CRN
kN
Weight
Approx.
kg
190
190
190
190
190
157
160
162
170
185
16358

8/08

30
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
for type JSK 36 CV
23
24
22
Fig.
Description
Part No.
1
2
3
4a
4b
5
6
7
8
9
10
11
12a
12b
12c
12d
12e
12f
13
14
15
16
17
18
19
20
21
22
23
24
Lock jaw
Lock jaw spring
Pivot for lock jaw
Locking bar manual adjust after 1992
Locking bar auto adjust pre 1992
Locking bar bolt
Lever
Operating handle
Head bolt
Wearing ring
Socket head bolt
Pedestal (170 mm) Bolt on Pedestals
Pedestal (300 mm) Non Weldable/bolt on Pedestals
Pedestal (150 mm) Weldable Pedestals
Pedestal (170 mm) Weld on/bolt on Pedestals
Pedestal (185 mm) Weldable Pedestals
Pedestal (250 mm) Weld on/bolt on Pedestals
Upper rubber cushion
Lower rubber cushion
Mounting bracket
Hex Bolt
Split pin
Spring hook, chain & wedge
Lubrication fitting compl. (steel)
Grease nipple compl. (steel line & nipple)
Adjusting screw
Spring latch 1996 onwards
Bolt for spring latch
Spring for latch
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
Repair Kits
SK 2121-50
SK 2121-52
SK 2121-68
Repair kit for rubber bearing

Repair kit for spring latch kit
SK 2121-69 CV
SK 3121-52 Kit
1.2.3.10.11
1,2,3
1,2,3,8,
10,11,18
13,14,16
22,23,24
2105-15
847
2121-13
2106-31
2105-17
2122-25
2105-01 CV
2105-07
1513
2105-11
2105-19
2121-07
2104-21
2104-20
2104-02X
2104-21X
2104-01X
2104-14X
1259
2105-25X
1372
60
1974
1436V
2105-28
1976
2121-76
3121-52
3521-03
3121-59
8/08

31
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Rubber mounting
For central lubrication systems
Type JSK 37 C-Z

with wear ring & external jaw lubrication
Applications: Tanker
General freight
Fridge van
B-double
Road train
The fifth wheel comes standard with bolt on/
weld on feet.
The fifth wheel coupling can be linked to
the central lubrication system of the prime
mover.
Lock jaw and wear ring can be replaced
without difficulty in a few minutes with the
fifth wheel still in position.
Shock absorbing large rubber pads.
Oil and grease resistant.
Mounting must be carried out in accordance
with our instructions.
Type
JSK 37 CZ/150
JSK 37 CZ/170
JSK 37 CZ/185
JSK 37 CZ/250
*JSK 37 CZ/300
Overall
Height
mm
Imposed Load
On Tractor
kg
D-Value
CRN
kN
Weight
Approx.
kg
150
170
185
250
300
20000
20000
20000
20000
20000
190
190
190
190
190
144.5
146.5
148.5
160.5
176.5
24286
AS1773-1996
* Note 300mm non weldable pedestals


32
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
for type JSK 37 C-Z
29
30
28
35
34
37
36
31
33
Fig.
Description
Part No.
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12a
12b
12c
12d
12e
13
14
15
16
Lock jaw
Lock jaw spring
Pivot for lock jaw, compl.
Locking bar
Locking bar bolt, compl.
Lever
Operating handle
Socket head bolt
Wearing ring
Head bolt
Pedestal (185 mm) Bolt on\Weld on
Pedestal (300 mm) Non Weldable
Mounting bracket
Socket head bolt, compl. with nut
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
33
34
35
36
37
Split pin
Spring hook Pre 1996
Lubrication fitting - steel
Grease nipple compl
Adjusting screw
Hexagon nut
Guide piece
Eye bolt comp.
Grease nipple
Lubrication tubing - nylon
Tubing clamp
Spring for latch
Operating Handle
Handle Extension
Internal Operating Handle
Head Bolt
Extended Handle Bolt
Cable Extension
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
Fig.
1,2,3,10,11
1,2,3
1,2,3,8
10,11,18,
13,14,16
28,29,30
1489 Z
847
2106-67
3205-06
3221-01
3105-18
3105-15
1513
3105-20
2105-19
2121-07
2104-01X
2104-02X
2104-21X
2104-14X
2104-20
1259
2105-25
1372
2121-15
Repair Kits
Part No

SK 3221-50 Z
SK 3221-52 Z
SK 3121-50

Repair kit for spring latch
SK 2121-69 Z
SK 3121-52 Kit
1974
1436
1989
1976
3105-05
2121-78
3205-07
2122-04
3121-11
3108-02
3121-13
3121-52
3521-03
3121-59
3105-15
3105-113
3105-115
1513
2421-50
3521-02
8/08

33
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Pivot bearing
Low Maintenance
JSK 37 E
with wear ring & external jaw lubrication
Applications: Highway Work

Tipper Work
Available with extended operating handle
(240mm) on demand.
DIN standard 74081 and ISO standard
3842. Suitable for all types of rear axle
steering systems.
Type
The right
to alter
specifications
is reserved.
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
E130
E150
E170
E185
E195
E205
E215
E235
E255
FX
FX
FX
FX
FX
FX
FX
FX
FX
Overall
height
mm
Imposed Load
on tractor
kg
D-value
kN
Weight
approx.
kg
130
150
170
185
195
205
215
235
255
20000
20000
20000
20000
20000
20000
20000
20000
20000
190
190
190
190
190
190
190
190
190
121.50
123.50
128.50
128.50
130
131.50
132
133.50
136.50
Pedestal
Style
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
on
on
on
on
on
on
on
on
on
CRN
36821
8/08

34
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

JSK 37 E
a
13
abcdefghi
Fig.
Description
Part No.
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
11a
12
12a
13a
13b
13c
13d
13e
13f
13g
Jaw
Jaw Spring
Jaw Pivot
Locking Bar
Lock Bar Bolt
Release Lever
Operating Handle
Head Bolt
Double Tension Spring
Wearing Ring Insert
Wearing Ring Fixture
Wearing Ring Fixture
Socket Head Bolt
Socket Head Bolt
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
13h
13i
14
14a
15
16
17
18
19
20
21
24
25
26
27
28
31
32
33
34

Poly Bush
Collar
Swivel Pin
Swivel Pin Bolt
Swivel Pin Plug
Spring Latch 1996 onwards
Bolt for Spring Latch
Spring for Latch
Adjusting Screw
Hex Nut
Guide Piece
Eye Bolt Complete
Grease Line Complete
Handle Extension
Cable Extension
SK 2920-235
SK 2920-255
SK 2905-95
SK 2905-20
SK3105-95
SK 3104/05
SK 3121/28
JS 1101/12
SK 3121/52
SK 3521/03
SK 3121/59
SK 3105/97
SK 2121/78
SK 3205/07
SK 2122/04
SK 3108/02
SK 3105/113
SK 3105/115
SK 3521/02
SK 2421/50
Fig.
1,2,3
14,15,16,17,18
1,2,3,8,10,12,28
10,11,12
22,23,24
1489 Z
847
2106/67
3205/06
3221/01
3105/18
3105/15
1513
3105/20
3105/92
3105/93
2105/19
3121/55
2121/07
2920-130
2920-150
2920-170
2920-185
2920-195
2920-205
2920-215
Repair Kits
Repair
Repair
Repair
Repair
Repair
kit
kit
kit
kit
kit
for
for
for
for
for
Part No
locking device
locking device
locking device
wearing ring
spring latch
SK
SK
SK
SK
SK
3221-52 Z
3121-061
3121-060 Z
3105-94 Kit
3121-52 Kit
8/08

35
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Pivot bearing
Low Maintenance
JSK 37 EW
Applications: Highway work

Tipper Work
Low maintenance fifth wheel coupling:
- maintenance free top plate
- maintenance free rubber cushioned pivot
bearings
- maintenance free wear ring
- only one remaining grease point the lock jaw
(little grease required)
Lock jaw and wear ring can be replaced without
difficulty in a few minutes with the fifth wheel still
in position.
(240mm) on demand.
Mounting must be carried out in accordance with
our instructions.
Mounting hole pattern in accordance with DIN
standard 74081 and ISO standard 3842. Suitable
for all types of rear axle steering systems.
Type
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
E150
E170
E185
E195
E205
E215
E235
E255
FX
FX
FX
FX
FX
FX
FX
FX
Overall
height
mm
Imposed Load
on tractor
kg
D-value
kN
Weight
approx.
kg
150
170
185
195
205
215
235
255
20000
20000
20000
20000
20000
20000
20000
20000
190
190
190
190
190
190
190
190
123.50
128.50
128.50
130
131.50
132
133.50
136.50
Pedestal
Style
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
on
on
on
on
on
on
on
on
CRN
36821
8/08

36
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
JSK 37 EW
abcd
13 a b c d e f g h i
ac
Fig.
1
2
3
4
5
6
7
8
9
10
11
12
13a
13b
13c
13d
13e
13f
13g
13h
13i
14a
14c
15
Qty
2
2
Fig.
1,2,3
1,2,3,8,10,12,28
10,11,12
14,15,16,17,18
19,20,21
22
Description
Part No.
Fig.
Lock jaw
Lock jaw spring
Locking bar
Lever
Operating handle (standard)
head bolt
Wearing ring insert
Wearing ring fixture
Socket head bolt
Rubber bushing for pressed feet
Collar
SK 1489 Z
SK 847
SK 2106-67
SK 3205-06
SK 3221-01
SK 3105-18
SK 3105-15
SK 1513
SK 3105-20
SK 3105-92
SK 3105-93
SK 3121-55
SK 2920-130
SK 2920-150
SK 2920-170
SK 2920-185
SK 2920-195
SK 2920-205
SK 2920-215
SK 2920-235
SK 2920-255
SK 2905-20
SK 2905-95
SK 3105-95
16
17
18
19
20
21
22a
22b
22c
22d
22e
22f
23a
23b
24
25
26
27
28
29
31
32
33
34
Repair kits
Part No.

Repair kit for wearing ring
Repair kit for bearing
Steel Inserts 6 bolt LH
SK 3221-52Z
SK 3121-060Z
SK 3104-94
SK 3121-061
SK 3121-52 Kit
SK4001L/8mm
Qty Description
Fig.
22
22
22,23
22,23
33,34
Part No.
Swivel pin
Socket head bolt, compl.
Plug
Latch
Spring noose with spacer
Top plate liner, right hand (4 bolt)
Top plate liner, left hand (4 bolt)
Top plate liner, right hand 10mm(6 bolt)
Top plate liner, left hand 10mm(6 bolt)
Top plate liner, right hand (new style)
Top plate liner, left hand (new style)
Countersunk bolt, compl.
Hexalobular bolt (new style)
Adjusting screw
Hexagon nut
Guide piece
Eye bolt, compl.
Lubrication tubing, compl.
Tubing clamp
Extended handle, grip
Extended handle, lower part
Latch cord, compl.
SK 3104-05
SK 3121-28
JS 1101-12
SK 3121-52
SK 3521-03
SK 3121-59
SK 3105-87R10
SK 3105-87L10
SK 3105/129R
SK 3105/129L
SK 3105/130L
SK 3105/130R
SK 3121-062
SKT 001006000
SK 3105-97
SK 2121-78
SK 3205-07
SK 2122-04
SK 3108-02
SK 3121-13
SK 3105-113
SK 3105-115
SK 3521-02
SK 2421-50
Repair kits
Part No.
Steel Inserts 6 bolt RH

Steel Inserts 8mm (6 bolt)
Repair kit for top plate liner 10mm (4 bolt)
Repair kit for top plate liner 10mm (6 bolt)
Handle extension, compl.
SK4001R/8mm
SK 4000
SK 3106-004
SK 3106-007
SK 3121-063

37
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Rubber mounting
Low Maintenance
JSK 37 CZW
Applications: Tanker
General freight
Stock crate
Fridge van
B-double
Road train
The fifth wheel comes standard with nonweldable feet, available with weldable feet
upon request.
Low maintenance fifth wheel coupling:
- maintenance free rubber cushioned pivot
bearings
- maintenance free wearing ring
- only one remaining grease point the lock
jaw (little grease required)
Lock jaw and wearing ring can be replaced
(240mm) on demand.
Type
Overall
Height
mm
Imposed Load
On Tractor
kg
D-Value
CRN
kN
Weight
Approx.
kg
JSK 37 C150W
JSK 37 C170W
JSK 37 C185W
JSK 37 C250W
*JSK 37 C300W
150
170
185
250
300
20000
20000
20000
20000
20000
190
190
190
190
190
136
139
141
145
161
24286
* Note 300mm non weldable pedestals

8/08

38
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
JSK 37 CZW
abcd
abcde
Fig.
1
2
3
4
5
6
7
8
9
10
11
12
13a
13b
13c
13d
13e
14
15
16
Fig.
1,2,3
10,11,12
14,15,17
18,19,20
19,20,21
21,22
Qty
2
2
2
Description
Part No.
Lock jaw
Lock jaw spring
Locking bar
Lever
Operating handle (standard)
head bolt
Wear ring insert
Wear ring
Socket head bolt
Pedestal (150mm) bolt on
Pedestal (170mm) bolt on\weldable
Pedestal (250mm) bolt on\weldable
Mounting bracket
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
Repair kits
Part No.

Repair kit for wearing ring
Repair kit for bearing
Repair kit for top plate liner (4 bolt)
SK 3221-52Z 21,22
SK 3105-94
22
SK 2121-69Z
22
SK 3121-52 Kit 22
SK 3121-59
30,32,33
SK 3106-004
18,19,20
1489 Z
847
2106-67
3205-06
3221-01
3105-18
3105-15
1513
3105-20
3105-92
3105-93
3121-55
2104-02X
2104-21X
2104-01X
2104-14X
2104-20
1259
2105-25
1372
Fig. Qty Description

17 8
18
19
20
21a
21b
21c
21d
22a
22b 12
23
24
25
26
27
28
30
31
32
33
Fig.
Part No.

Latch
Top plate liner, right hand (6 bolt)
Top plate liner, left hand (6 bolt)
Top plate liner, right hand (new style)
Top plate liner, left hand (new style)
Hexalobular bolt (new style bolt only)
Adjusting screw
Hexagon nut
Guide piece
Eye bolt, compl.
Lubrication tubing, compl.
Tubing clamp
Extended handle, grip
Extended handle, lower part
Latch cord, compl.
SK 2121-15
SK 3121-52
SK 3521-03
SK 3121-59
SK 3105-12910R
SK 3105-12910L
SK 3105/130L
SK 3105/130R
SK 3121-062
SKT 001006000
SK 3105-97
SK 2121-78
SK 3205-07
SK 2122-04
SK 3108-02
SK 3121-13
SK 3105-113
SK 3105-115
SK 3521-02
SK 2421-50
Adapting kit
Part No.
Repair kit for top plate liner (6 bolt)

Steel Inserts Kit 8mm (6 bolt)
Steel Inserts 6 bolt LH
Steel Inserts 6 bolt RH
Handle extension, compl.
SK 3106-007
SK 4000
SK4001L/8mm
SK4001R/8mm
SK 3121-063
SK 3121-52 Kit

8/08

39
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Fifth wheel
coupling 2 JSK 42
Technical
Specification
The fifth wheel coupling
complies with the following
directives / standards: 94/20/
EC - Class G50, DIN 74081,
ISO 3842. Suitable for
mounting 2 king pins (50) as
per 94/20/EC, DIN 74085, ISO
337 and steering wedges as
per 94/20/EC, DIN 74085.
Technical Data
D value (kN)
Imposed load U (t)
CRN
200
20
36130
Selection Table
Order No.
H
Standard or
(mm) Greaseless
JSK 42 WJ-150
JSK 42 WJ-185
JSK 42 WJ-225
JSK 42 WJ-250
JSK 42 ZJ-150
JSK 42 ZJ-185
JSK 42 ZJ-225
JSK 42 ZJ-250
150
185
225
250
150
185
225
250
G
G
G
G
S
S
S
S
Plate mounting
Sensor Version
Order No.
JSK 42 WJS-150
JSK 42 WJS-185
JSK 42 WJS-225
JSK 42 WJS-250
JSK 42 ZJS-150
JSK 42 ZJS-185
JSK 42 ZJS-225
JSK 42 ZJS-250
H
Standard or
(mm) Greaseless
150
185
225
250
150
185
225
250
G
G
G
G
S
S
S
S
Sensors
3
3
3
3
3
3
3
3
8/08

40
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

JSK 42
ab
ab
Item Designation
01a Wearing part with
mounting bolt kit
01b Wear ring insert
02a Mounting ring kit
02b Wear ring
03 Locking bar with
mounting bolt
04 Tension spring
05 Lubrication tube, compl.
with cable tie
06 Lock jaw
07 Double tension spring
08 Locking spring
09 Short handle, c/w 08
Long handle, c/w 08
10 Lever kit
Order No.
Quantity
per JSK
SKE 001740020
SK 3105-92
SK 3105-94
SK 3105-93
1
1
1
1
SKE 001009720
SK 847
1
1
SK 3108-02
SK 3221-52 Z
SK 3105-20
SKE 001440000
SKE 001390020
SKE 001390120
SKE 001380020
1
1
1
1
1
1
1
Item
Designation
01, 02, 03, 04, 05, 06, 19 Lock, compl.
24a
Steel Inserts
Item Designation
Order No.
11
12
14
14a
15
19
20
21
22
23
24
24a
25
SKE 001009800
SKE 001750020
SKE 001620020
SKE 001360300
SKE 001650020
SK 2122-04
SKE 500740220
SKE 001011400
SKE 001370020
SKE 001530220
SKE 001007020
SKE 1007020-10
SKE 001005620
SKE 001005720
SKE 001005820
SKE 001005920
Lever spring
Lever bolts
Lever, compl.
Sensor locking bar lever kit
Lever bolt
Eye bolt, compl.
Adjusting screw with guide
Bolt
Collar, compl.
Bridge
Skid plate with bolts, compl.
10mm Skid plate with bolts
Pedestal H 150
Pedestal H 185
Pedestal H 225
Pedestal H 250
Quantity
per JSK
1
1
1
1
1
1
1
4
2
2
1
1
2
2
2
2
Order No.
SKE 001640020
SK 6000
8/08

41
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Sensor Coupling
A = sensor for connection status
B = sensor for king pin
C = sensor for coupling height
Fig.
01
02
03
03
Description
Remark
Sensor locking bar kit, with magnet

Trailer sensor retaining plate with load elements
3-sensor cable harness with mounted plate JSK 42
2-sensor cable harness with mounted plate JSK 42
Sensor display with 2 sensors - 24V
Sensor display with 2 sensors - 24V, SCANIA France
Entension cable, standard quality
Entension cable, ADR quality
with 08
with 06
with 04, 05, 06, 07
with 04, 05
oZ
oZ
oZ
oZ, 2m cable
oZ
oZ
oZ
Part No.
SKE
SKE
SKE
SKE
SKE
SKE
SKE
SKE
SKE
SKE
SKE
Quantity
001360300
003220100
002040100
002040300
501620100
501620200
501620300
501620400
501620500
002110100
002110200
1
1
1
1
1
1
1
1
1
1
1
8/08

42
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
43

Roll Back Application
JSK 37 027
101.6
Applications: Roll back

application
Tipper Work
127
Low maintenance fifth wheel

coupling:
- maintenance free rubber cushioned
pivot bearings
- maintenance free wear ring
- only one remaining grease point the
lock jaw (little grease required)
304 Min.
330 Max.
864
101.6
500.38
304
73.91
5 Min.
10 Min.
Lock jaw and wear ring can be

replaced without difficulty in a few
minutes with the fifth wheel still in
position.
Pneumatic operation
Also available in low profile ball race assembly
Type
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
JSK37
Overall Imposed Load

height
on tractor
mm
kg
027
027
027
027
027
027
027
027
150
170
185
195
205
215
235
255
FX
FX
FX
FX
FX
FX
FX
FX
150
170
185
195
205
215
235
255
20000
20000
20000
20000
20000
20000
20000
20000
D-value
kN
Weight
approx.
kg
200
200
200
200
200
200
200
200
123.50
128.50
128.50
130
131.50
132
133.50
136.50
Pedestal
Style
Weld
Weld
Weld
Weld
Weld
Weld
Weld
Weld
on
on
on
on
on
on
on
on
CRN
38553
8/08

44
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

JSK 37 027
Fig. Description
Part No.
Fig. Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
SK-73121-55
SK-3105-93
SK-3105-92
SK-72106-67
SK-73105-95
SK-73104-05
SK-73104-47
SK-70202-15
SK-79020-13
SK-73221-01
SK-70105-01
SK-71513
SK-70401-02
SK-70302-01
SK-79016-32
SK-70206-02
SK-79016-46
SK-71012-00
SK-79016-22
SK-70202-28
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
35a
36
37
38
39
SK-70303-05
SK-79016-37
SK-3205-06
SK-71005-04
SK-1489LZ
SK-847
SK-2106-69
SK-2106-70
SK-70101-03
SK-79020-08
SK-70102-01
SK-79010-05
SK-73205-07
SK-3105-20
SK-79005-05
SK-5000 L&R
SK-3108-02
SK-75020-16
SK-3121-027
JOST RK 001
Cushion ring bolt

Cushion ring plate
Cushion ring insert
Pivot pin for lock jaw
Collar
Bracket pin
Tab washer
1/2-13 3/4 hex bolt
Air cylinder
Locking bar bolt assembly
3/8 dia. 3/4 lg slic pin
Pivot bolt assembly
3/8-16 locknut
3/8 SAE flat washer
Handle guide
3/8-16 1-1.4 button screw
Pull cable assembly
T-handle air release
Lock/unlock plate weldment
1/4-20 3/4 hex head cap screw
Fig.
1-36
1-4,25-28,36,37
35a
35b
1/4 split lock washer

Release arm assembly
Locking bar
Cable spring
Lock jaw
Lock jaw spring
Eyebolt
Ring
1/8 dia 1 lg cotter pin
Cylinder mount bracket
3/8 dia 1-3/8 clevis pin
Adjustment screw with hex nut
Guide piece
Narrow topplate lube plate
Steel inserts
Lubricating kit
Info pack
Nut and bolt
Pneumatic air release system
Repair Kits
Part No
Repair kit for complete topplate

Repair kit for cushion and lock jaw
Steel insert kit
Greaseless insert kit
SK-75013-15
SK-73221-50Z
SK-5000
SK-3106-027
8/08

45
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Cardan mounting
(pitch and roll)
JSK 37 G-240
Heavy duty off road

Applications: Low Loaders
Step Deck Trailers
A fifth wheel coupling for operation under
arduous conditions.
The well known JOST locking device together
with the maintenance free cardan mounting
ensures a high degree of stability and safety
on the road and off road.
The lateral movement of 7 is designed to
compensate for the roll between the truck
and semi-trailer during off-road use. On the
road, and especially at higher speeds, it
must be locked at 3 or blocked for safety
reasons.
Type
JSK 37G 240
Overall
height
mm
Imposed Load
on prime mover
kg
D-value
CRN
kN
Weight
approx.
kg
240
25000
162
236
24500
Complies with DIN 74081 and ISO 3842.

Suitable for all types of rear axle steering
systems.
8/08

46
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

JSK 37 G-240
50
36
Fig.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
50
Description
Lock jaw
Lock jaw spring
Bolt
Wear ring insert
Retainer for wearing ring
Socket head bolt
Locking bar
Lever
Bolt compl.
Securing lever
Operating handle
Wire cable compl.
Head bolt compl.
Retainer
Socket head bolt compl.
Latch
Spring with spacer
Hexagon bolt compl.
Clamping sleeve
Clamp
Tension spring
Guide rod with fig. 26
Adjusting handle compl.
Clamping sleeve
Spring
Plug
Tubing compl.
Adjusting screw
Part No.
SK 1489 Z
SK 847
SK 2405-18
SK 3105-92
SK 3105-93
SK 3121-55
SK 3305-001
SK 3305-008
SK 3353-005
SK 3305-003
SK 3105-113
SK 3521-02
SK 2421-50
SK 3305-004
SK 3353-006
SK 3305-007
SK 1513
SK 3521-01
SK 3521-09
SK 3521-03
SK 2121-01
SK 3306-001
000.009.014
SK 3353-007
SK 3306-003
000.003.024
000.009.015
000.010.017
SK 3353-008
SK 2905-52
Fig.
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
34,38
39,40,
41,47,
1,2,3,
4,6,
17,18,
Description
Hexagon nut
Guide piece
Rocking arm
Bushing
Pivot
Distance ring
Bracket
Safety bracket
Safety bracket
Hexagon bolt
Hexagon bolt
Bracket
Stop block
Pedestal
Distance ring
Snap ring
Plug
Sensor
Distance Ring
Part No.
SK 2121-78
SK 3205-07
SK 3304-002
SK 3304-010
SK 3304-003
SK 3304-009
SK 3304-004
SK 3304-006
SK 2521-20
000.001.114
000.001.127
SK 3304-005
SK 3306-004
SK 3353-009
SK 3304-001
SK 3304-008
000.006.057
000.010.021
000.018.002
SK 3304-007
REPAIR KITS
Repair kit for cardan bearing
SK 3353-010
SK 3353-011

8/08

47
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Low profile stabilised

fifth wheel assembly 2
Type: LP 36 AV2 cast top
e
l
b
a
l
e
g
i
a
v
A
r
n
o
L
o
N
Application: Tipper work

also available with:
16mm Base Plate LP 36 AV2 16mm
20mm Base Plate LP 36 AV2 20mm
*Note thicker base plate determines
extra weight and height.
D-Value
162.4kN
213 mm
Overall height
Imposed load
20000 kgs
115000 kgs
Gross comb. weight
approx
360 kgs
Weight approx.
(for 12mm base plate)
Complies with ADR 62,63
AS 1773-1990
Evidence No.
79007-12
Twin lockouts.
Flush bolt heads on mounting plate
in chassis mounting zone.
Wearing ring easily removed from
above on JSK 36 AV2 fifth wheel.
8/08

48
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
LP 36 AV2 Cast top
23
22
18
19
20
21
26 27 28 29
24
25
31
17
32
20
10
9
7
1
2
11
25
12
30
3
14
4
13
16
15
16
Fig.
Description
Part No
LP 36 AV2
Fig.
Description
Part No
LP 36 AV2
1
2
3a
3b
3c
4
5
6
7
8
9
10
11
12
13
14
15
Ball bearing
Half Moon c/w 130mm Ped.
Base plate (12mm) incl.6,7,8
Hex. bolt compl.
Countersunk bolt compl.
lock out pin compl.
Tube park
Tube lock out
Lock jaw
Lock jaw spring
Pivot compl.
Locking bar (manual)
Pivot compl.
Release lever
Operating handle
KDL 900-6
SK 3704-02
SK 3706-12
SK 3706-16
SK 3706-20
SK 3721-04
SK 3721-05
SK 3706-10
SK 3706-04
SK 3706-05
SK 2105-15
SK 847
SK 2121-13
SK 2106-31
SK 2122-25
SK 2105-01
SK 2105-07
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Head bolt
Wearing ring
Socket head bolt
Split pin
Spring hook
Grease tube
Grease nipple compl
Rubber bushing (Fabricated feet)
Swivel pin with Fig. 43
Stop
Stop for swivel pin
Washer with tap
Hexagon Screw
Adjusting screw
Plug
Split pin
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
Item
Repair Kit
Part No
9, 10, 11, 18, 19

9, 10, 11
for locking device

for locking device
SK 2121-50
SK 2121-52
1513
2105-11
2105-19
2121-07
1790
1436
2105-28
1976
2905-20
2106-18
2106-24
2106-23
2521-20
2521-17
2121-76
2122-08
2921-04
8/08

49
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Type: LP 36 CV
cast top
Application: Fridge van

General freight
Tankers
16mm Base Plate
LP 36 CV 16mm
20mm Base Plate LP 36 CV 20mm

Narrow chassis width available
ie European spec
D-Value
Overall height
Imposed load
Gross comb. weight
Weight approx.
CRN
190kN
230 mm
20000 kgs
135000 kgs
379 kgs
24835
Twin lockouts.
Wear ring easily removed from
above on JSK 36 CV fifth wheel.
8/08

50
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts LP 36 CV
23
24
22
28
31
25
26
27
32
30
28
29
Fig.
Description
Part No
1
2
3
4
5
6
7
8
9
10
11
12
Lock jaw
Lock jaw spring
Pivot for lock jaw
Locking bar (manual)
Locking bar bolt
Lever
Operating handle
Head bolt
Wearing ring
Socket head bolt
Pedestal (185mm)
Pedestal (170mm)
Pedestal (150mm)
Mounting bracket
Hex bolt
Split pin
Lubrication fitting compl.
Grease nipple compl.
Adjusting Screw
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
Repair Kits
SK 2121-50
SK 2121-52
SK 2121-68

SK 2121-69
SK 3121-52 Kit
13
14
15
16
17
19
20
21
22
1,2,3,10,11
1,2,3
1,2,3,8
10,11,13
14,16
22,23,24
2105-15
847
2121-13
2106-31
2122-25
2105-01
2105-07
1513
2105-11
2105-19
2121-07
2104-01X
2104-21X
2104-02X
1259
2105-25
1372
60
1974
2105-28
1976
2121-76
3121-52
Fig.
Description
Part No.
LP 36 CV
23
23a
24
25
26
27a
27b
27c
28
29
30
31
32

Latch compl.
Spring for latch
Ball bearing
Pedestals half moon compl.
Hex. bolt compl.
lock out pin compl.
Tube park
Tube lock out
SK 3521-03
SK 1436 V
SK 3121-59
KDL 900-6
SK 3706-29
SK 3706-12
SK 3706-16
SK 3706-20
SK 3721-04
SK 3721-05
SK 3706-10
SK 3706-04
SK 3706-05
8/08

51
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Stabilised
Type: LP 37 E cast top
Application: Highway work

Tipper work
16mm Base Plate
LP 37 E 16mm
20mm Base Plate

LP 37 E 20mm
extra weight
**Note only available on weld on feet
D-Value
Overall height
Imposed load
Gross comb. weight
Weight approx.
CRN
190kN
215 mm
20000 kgs
115000 kgs
356 kgs
24833
Twin lockouts.
Flush bolt heads on mounting
plate in chassis mounting zone.
above on JSK 37 E fifth wheel.
8/08

52
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

LP 37 E cast top
Fig.
Description
Part No.
LP 37 E
Fig.
Description
Part No.
LP 37 E
1
2
3
4
5
6
7
8
9
10
10a
11
11b
11a
12
13
13a
14
15
16
17
18
Jaw
Jaw Spring
Jaw Pivot
Locking Bar
Lock Bar Bolt
Release Lever
Operating Handle
Head Bolt
Wear Ring Fixture
Wear Ring Fixture
Wear Ring Bolt
Wear Ring Insert
Wear Ring Bolt
Swivel Pin
Pedestal Bush
Collar
Swivel Pin Bolt
Swivel Pin Plug
Spring Latch
Spring for Latch
SK 1489 Z
SK 847
SK 2106-67
SK 3205-06
SK 3221-01
SK 3105-18
SK 3105-15
SK 1513
SK 3105-20
SK 2105-19
SK 3105-93
SK 2121-07
SK 3105-92
SK 3121-55
SK 3104-05
SK 2905-20
SK 3105/95
SK 3121-28
JS 1101-12
SK 3121-52
SK 3521-03
SK 3121-59
19
20
21
22
23
24
26
27
28
29
30
31
32
33a
33b
33c
34
35
36
37
38
Adjusting Screw
Hex Nut
Guide Piece
Eye Bolt Complete
Operating Handle
Handle Extension
Head Bolt
Cable Extension
Ball bearing
Half Moon c/w 130mm Ped.
Hex. bolt compl.
lock out pin compl.
Tube park
Tube lock out
SK 3105-97
SK 2121-78
SK 3205-07
SK 2122-04
SK 3108-02
SK 3105-15
SK 3105-113
SK 3105-115
SK 1513
SK 2421-50
SK 3521-02
KDL 900-6W
SK 3704-02
SK 3706-12
SK 3706-16
SK 3706-20
SK 3721-04
SK 3721-05
SK 3706-10
SK 3706-04
SK 3706-05
Fig.
1,2,3
12,13,13a,14,15
1,2,3,8,11,23,28
10,11,11a
Repair Kits
Repair
Repair
Repair
Repair
kit
kit
kit
kit
for
for
for
for
Part No
locking device
locking device
locking device
wear ring
SK
SK
SK
SK
3221-52 Z
3121-061
3121-060 Z
3105-94 Kit
8/08

53
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Type LP 37 CZ Cast top
Application: Stock crate

Fridge van
General freight
Tankers
16mm Base Plate
LP 37 CZ 16mm
20mm Base Plate
LP 37 CZ 20mm
Narrow chassis width available

ie European spec
D-Value
Overall height
Imposed load
Gross comb. weight
Weight approx.
CRN
190kN
230 mm
20000 kgs
135000 kgs
367 kgs
24836
Twin lockouts.
in chassis mounting zone. Cast
type unit equipped with external
king pin grease point for additional
lubrication to the jaw.
above on JSK 37 CZ fifth wheel.
8/08

54
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
LP 37 CZ cast top
Fig.
Description
Part No
Fig.
Description
Part No.
LP 37 CZ
LP 37 CZ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
18b
19
20
21
22
23
24
25
Lock jaw
Lock jaw spring
Locking bar
Lever
Operating handle
Head bolt
Wearing ring
Socket head bolt
Pedestal (185mm)
Pedestal (170mm)
Pedestal (150mm)
Mounting bracket
Split pin
Spring hook pre 1995
Wedge
Lubrication fitting
Grease nipple compl
Adjusting Screw
Hexagon nut
Guide piece
Eye bolt compl.
Grease nipple
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
1489 Z
847
2106-67
3205-06
3221-01
3105-18
3105-15
1513
3105-20
2105-19
2121-07
2104-01X
2104-21X
2104-02X
1259
2105-25
1372
2121-15
1974
1436
1436 V
1989
1976
3105-05
2121-78
3205-07
2122-04
3121-11
26
27
28
29
30
31
32
33a
33b
33c
34
35
36
37
38
39
40
41
42
43
1,2,3,10,11,26
1,2,3,26
1,2,3,8
10,11,18,26
13,14,16
28, 29, 30
Lubrication tubing with Fig. 27

Tubing clamp
Spring for Latch
Ball bearing
Half moon compl.
Hex. bolt compl.
lock out pin compl.
Tube park
Tube lock out
Handle Extension
Head Bolt
Cable Extension
Repair Kits
SK 3108-02
SK 3121-13
SK 3121-52
SK 3521/03
SK 3121/59
KDL 900-6
SK 3706-29
SK 3706-12
SK 3706-16
SK 3706-20
SK 3721-04
SK 3721-05
SK 3706-10
SK 3706-04
SK 3706-05
SK 3105-113
SK 3105-115
SK 1513
SK 2421-50
SK 3521-02

Kit for latch
SK 2121-69 Z
SK 3121-52 Kit
SK 3221-50 Z
SK 3221-52 Z
SK 3121-50 Z
8/08

55
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Type LP 37 G-240-16 Cast top 2
Heavy duty off road

Step Deck Trailers
Standard with 16 mm base plate
optional: 20mm Base Plate
LP 37 G-240-16
D-Value
Overall height
Imposed load
Gross comb. weight
Weight approx.
CRN
162.4kN
324 mm
21000 kgs
125000 kgs
490 kgs
24831
Twin lockouts.
Flush bolt heads on mounting plate in
chassis mounting zone.
JSK 37 G-240 fifth wheel coupling for
operation under arduous conditions.
compensate for the roll between the truck
and semi-trailer during off-road use. On the
road, and especially at higher speeds, it must
be locked at 3 or blocked for safety reasons.
8/08

56
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
LP 37 G-240-16 Cast top 2
Fig.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Description
Lock jaw
Lock jaw spring
Bolt
Wearing ring
Socket head bolt
Locking bar
Lever
Bolt compl.
Securing lever
Operating handle
Wire cable compl.
Retainer
Latch, compl.
Spring with spacer
Hexagon bolt compl.
Clamping sleeve
Clamp
Tension spring
Clamping sleeve
Spring
Plug
Tubing compl.
Adjusting screw
Part No.
LP 37-G240-16
SK 1489 Z
SK 847
SK 2405-18
SK 3105-92
SK 3105-93
SK 3121-55
SK 3305-001
SK 3305-008
SK 3353-005
SK 3305-003
SK 3105-113
SK 3521-02
SK 2421-50
SK 3305-004
SK 3353-006
SK 3305-007
SK 1513
SK 3521-01
SK 3521-09
SK 3521-03
SK 2121-01
SK 3306-001
000.009.014
SK 3353-007
SK 3306-003
000.003.024
000.009.015
000.010.017
SK 3353-008
SK 2905-52
Fig.
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
34,36,38,
38,39,40,
41,42,47
1,2,3,
4,6,
Description
Hexagon nut
Guide piece
Rocking arm
Bushing
Pivot
Distance ring
Bracket
Safety bracket
Safety bracket
Hexagon bolt
Hexagon bolt
Bracket
Stop block
Pedestal
Distance ring
Snap ring
Plug
Sensor
Distance Ring
Part No.
LP 37-240-16
SK 2121-78
SK 3205-07
SK 3304-002
SK 3304-010
SK 3304-003
SK 3304-009
SK 3304-004
SK 3304-006
SK 2521-20
000.001.114
000.001.127
SK 3304-005
SK 3306-004
SK 3353-009
SK 3304-001
SK 3304-008
000.006.057
000.010.021
000.018.002
SK 3304-007
REPAIR KITS
SK 3353-010
SK 3353-011
Fig.
Description
Part No
Fig.
Description
Part No
58
51
52
53
Ball bearing
Pedestals half moon compl.
Hex. bolt compl.
KDL 900-6W
SK 3706-29
SK 3706-16
SK 3721-04
54
55
56
57

lock out pin compl.
Tube park
Tube lock out
SK
SK
SK
SK
3721-05
3706-10
3706-04
3706-05
8/08

57
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Double Row Stabilised

Type: DR 36 CV cast top

Tankers
16mm Base Plate DR 36 CV 16mm
20mm Base Plate DR 36 CV 20mm
CRN
Overall height
Gross comb. weight
Weight approx.
D-Value
24832
264 mm
135000 kgs
417 kgs
190kN
Twin lockouts.
above on JSK 36 C-V fifth wheel.
8/08

58
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts DR 36 CV
23
24
22
Fig.
Description
Part No
DR 36 CV
1
2
3
4a
4b
5
6
7
8
9
10
11
12
Lock jaw
Lock jaw spring
Pivot for lock jaw
Locking bar bolt
Lever
Operating handle
Head bolt
Wearing ring
Socket head bolt
Pedestal (185mm)
Pedestal (170mm)
Pedestal (150mm)
Mounting bracket
Hex bolt
Split pin
Spring hook
SK 2105-15
SK 847
SK 2121-13
SK 2106-31
SK 2105-17
SK 2122-25
SK 2105-01
SK 2105-07
SK 1513
SK 2105-11
SK 2105-19
SK 2121-07
SK 2104-01X
SK 2104-21X
SK 2104-02X
SK 1259
SK 2105-25
SK 1372
SK 60
SK 1974
SK 1436V
SK 2105-28
13
14
15
16
17
18
19
Fig.
Description
20
21
22
23
24
31
32
33a
33b
33c
34
35
36
37
38
Part No.
DR 36 CV
Grease nipple compl

Adjusting Screw
Spring for latch
Ball bearing
Half moon compl.
Hex. bolt compl.
lock out pin compl.
Tube park
Tube lock out
Repair Kits
1,2,3,10,11 Repair kit for locking device
1,2,3
1,2,3,8
10,11,18,
13,14,16
22,23,24
SK 1976
SK 2121-76
SK 3121-52
SK 3521-03
SK 3121-59
DK 90-14
SK 3706-40
SK 3706-30
SK 3706-31
SK 3706-32
SK 3721-04
SK 3721-05
SK 3705-09
SK 3706-04
SK 3705-10
SK 2121-50
SK 2121-52
SK 2121-68
SK 2121-69
SK 3121-52 Kit
8/08

59
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Type: DR 37 C-Z cast top

Tankers
16mm Base Plate DR 37 CZ 16mm
20mm Base Plate DR 37 CZ 20mm
CRN
24842
Overall height
264 mm
Imposed load
20000 kgs
Gross comb. weight
135000 kgs
Weight approx. (12mm Base) 405 kgs
D-Valve
190kN
Twin lockouts.
above on JSK 37 C-Z fifth wheel.
8/08

60
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts DR 37 C-Z
Fig.
Description
Part No
Fig.
Description
Part No.
DR 37 CZ
DR 37 CZ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Lock jaw
Lock jaw spring
Locking bar
Lever
Operating handle
Head bolt
Wearing ring
Socket head bolt
Pedestal (185mm)
Pedestal (170mm)
Pedestal (150mm)
Mounting bracket
Split pin
Spring hook
Lubrication fitting
Grease nipple compl
Adjusting Screw
Hexagon nut
Guide piece
Eye bolt compl.
Grease nipple
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
1489-Z
847
2106-67
3205-06
3221-01
3105-18
3105-15
1513
3105-20
2105-19
2121-07
2104-01X
2104-21X
2104-02X
1259
2105-25
1372
2121-15
1974
1436
1989
1976
3105-05
2121-78
3205-07
2122-04
3121-11
26
27
28
29
30
31
32
33a
33b
33c
34
35
36
37
38
39
40
41
42
43
1,2,3,10,11
1,2,3
1,2,3,8
10,11,18,
13,14,16
28,29,30
Tubing compl.
Tubing clamp
Spring for Latch
Ball bearing
Half moon compl.
Hex. bolt compl.
lock out pin compl.
Tube park
Tube lock out
Handle Extension
Head Bolt
Cable Extension
Repair Kits
Latch Kit
SK 3353-008
SK 3121-13
SK 3121-52
SK 3521/03
SK 3121/59
DK 90-14
SK 3706-40
SK 3706-30
SK 3706-31
SK 3706-32
SK 3721-04
SK 3721-05
SK 3705-09
SK 3706-04
SK 3705-10
SK 3105-113
SK 3105-115
SK 1513
SK 2421-50
SK 3521-02
SK 3221-50Z
SK 3221-52Z
SK 3121-50Z
SK 2121-69Z
SK 3121-52 Kit
8/08

61
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Stabilised
Type: DR 37 E cast top
Application: Highway work

Tipper work
16mm Base Plate
DR 37 E 16mm
20mm Base Plate

DR 37 E 20mm
extra weight
**Note only available on weld on feet
D-Value
190kN
Overall height
244 mm
Imposed load
20000 kgs
Gross comb. weight
135000 kgs
Weight approx.
394 kgs
Complies with ADR 62,63
CRN
24840Twin
lockouts.

8/08

62
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

DR 37 E cast top
Fig.
Description
Part No.
DR 37 E
Fig.
Description
Part No.
DR 37 E
1
2
3
4
5
6
7
8
9
10a
10b
10c
10d
11
12
13
13a
14
15
Jaw
Jaw Spring
Jaw Pivot
Locking Bar
Lock Bar Bolt
Release Lever
Operating Handle
Head Bolt
Wear Ring
Wear Ring
Wear Ring Insert
Wear Ring Bolt
Wear Ring Bolt
Swivel Pin
Pedestal Bush
Collar
Swivel Pin Bolt
Swivel Pin Plug
SK 1489 Z
SK 847
SK 2106/67
SK 3205/06
SK 3221/01
SK 3105/18
SK 3105/15
SK 1513
SK 3105/20
SK 2105/19
SK 3105/92
SK 3105/93
SK 3121/55
SK 2121/07
SK 3104/05
SK 2905-20
SK 3105/95
SK 3121/28
JS 1101/12
16
17
18
19
20
21
22
23
24
25
26a
26b
26c
27
28
29
30
31
Spring Latch
Spring for Latch
Adjusting Screw
Hex Nut
Guide Piece
Eye Bolt Complete
Ball bearing
Half moon c/w 130mm Ped.
Hex. bolt compl.
Lock out pin compl.
Tube park
Tube lock out
SK 3121/52
SK 3521/03
SK 3121/59
SK 3105/97
SK 2121/78
SK 3205/07
SK 2122/04
SK 3108/02
DK 90/14
SK 3705-11
SK 3706-30
SK 3706-31
SK 3706-32
SK 3721-04
SK 3721-05
SK 3705-09
SK 3706-04
SK 3705-10
Fig.
1,2,3
12,13,13a,14,15
1,2,3,8,11,23,28
10,11,11a
16,17,18
Repair Kits
Part No
Repair
Repair
Repair
Repair
Repair
SK
SK
SK
SK
SK
kit
kit
kit
kit
kit
for locking device

for locking device
for locking device
for wear ring
Latch
3221-52 Z
3121-061
3121-060 Z
3105-94 Kit
3121-52 Kit
8/08

63
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Type: DR 37 G-240-16 Cast top
Heavy duty off road

Step Deck Trailers
Tankers
DR 37 G-240-16
D-Value
Overall height
Imposed load
Gross comb. weight
Weight approx.
CRN
162.4kN
358 mm
21000 kgs
125000 kgs
518 kgs
24839
Twin lockouts.
Flush bolt heads on mounting plate in
chassis mounting zone.
Jsk 37 G-240 fifth wheel coupling for
ensures a high degree of stability and safety on
the road and off road.
compensate for the roll between the truck and
semi-trailer during off-road use. On the road,
and especially at higher speeds, it must be
locked at 3 or blocked for safety reasons.
without difficulty in a few minutes with the fifth
wheel still in position.
8/08

64
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
DR 37 G-240-16 Cast top
Fig.
Description
Part No.
DR 37-240-16
SK 1489 Z
SK 847
SK 2405-18
SK 3105-92
SK 3105-93
SK 3121-55
SK 3305-001
SK 3305-008
SK 3353-005
SK 3305-003
SK 3105-113
SK 3521-02
SK 2421-50
SK 3305-004
SK 3353-006
SK 3305-007
SK 1513
SK 3521-01
SK 3521-09
SK 3521-03
SK 2121-01
SK 3306-001
000.009.014
SK 3353-007
SK 3306-003
000.003.024
000.009.015
000.010.017
SK 3353-008
SK 2905-52
Fig.
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Lock jaw
Lock jaw spring
Bolt
Wearing ring
Socket head bolt
Locking bar
Lever
Bolt compl.
Securing lever
Operating handle
Wire cable compl.
Retainer
Head bolt compl.
Latch
Spring with spacer
Hexagon bolt compl.
Clamping sleeve
Clamp
Tension spring
Clamping sleeve
Spring
Plug
Tubing compl.
Adjusting screw
Fig.
Description
Part No
Fig.
Description
Part No
58
51
52
52b
53
Ball bearing
Half moon compl.
Hex. bolt compl.
DK 90-14
SK 3706-40
SK 3706-31
SK 3706-32
SK 3721-04
54
55
56
57

lock out pin compl.
Tube park
Tube lock out
SK
SK
SK
SK
34,38
39,40,
41 42,
47
1,2,3,
4,6,
Hexagon nut
Guide piece
Rocking arm
Bushing
Pivot
Distance ring
Bracket
Safety bracket
Safety bracket
Hexagon bolt
Hexagon bolt
Bracket
Stop block
Pedestal
Distance ring
Snap ring
Plug
Sensor
Distance Ring
Part No.
DR 37-240-16
SK 2121-78
SK 3205-07
SK 3304-002
SK 3304-010
SK 3304-003
SK 3304-009
SK 3304-004
SK 3304-006
SK 2521-20
000.001.114
000.001.127
SK 3304-005
SK 3306-004
SK 3353-009
SK 3304-001
SK 3304-008
000.006.057
000.010.021
000.018.002
SK 3304-007
REPAIR KITS
SK 3353-010
SK 3353-011
3721-05
3705-09
3706-04
3705-10
8/08

65
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Single Row Stabilised

Type: SO 36 CV cast top

Tankers
16mm Base Plate SO 36 CV 16mm
20mm Base Plate SO 36 CV 20mm
extra weight and height
Overall height
Imposed load
Gross comb. weight
Weight approx.
D-Value
CRN
264 mm
20000 kgs
115000 kgs
401 kgs
162.4kN
24844
Twin lockouts.
above on JSK 36 C-V fifth wheel.
8/08

66
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
SO 36 CV
23
24
22
Fig.
Description
Part No
SO 36CV
Fig.
1
2
3
4a
4b
5
6
7
8
9
10
11
12
Lock jaw
Lock jaw spring
Pivot for lock jaw
Locking bar bolt
Lever
Operating handle
Socket head bolt
Wearing ring
Head bolt
Pedestal (185mm)
Pedestal (170mm)
Pedestal (150mm)
Mounting bracket
Hex bolt
Split pin
SK 2105-15
SK 847
SK 2122-25
SK 2106-31
SK 2105-17
SK 2122-25
SK 2105-01
SK 2105-07
SK 1513
SK 2105-11
SK 2105-19
SK 2121-07
SK 2104-01
SK 2104-21
SK 2104-02
SK 1259
SK 2105-25
SK 1372
SK 60
SK 1974
SK 2105-28
SK 1976
21
22
23
24
31
32
33a
33b
33c
34
35
36
37
38
13
14
15
16
17
19
20
Description
Part No.
SO 36CV
Adjusting screw
SK 2121-76
SK 3121-52
SK 3521-03
Spring for latch
SK 3121-59
Ball bearing
SO1000-24
Half moon compl.
SK 3706-40
Base plate (12mm) incl.36,37,38 SK 3706-30
Hex. bolt compl.
SK 3721-04
SK 3721-05
lock out pin compl.
SK 3705-09
Tube park
SK 3706-04
Tube lock out
SK 3705-10
Repair Kits
1,2,3,10,11 Repair kit for locking device
SK 2121-50
1,2,3
SK 2121-52
1,2,3,8
SK 2121-68
10,11,
13,14,16
SK 2121-69
22,23,24
SK 3121-52 Kit
8/08

67
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Single Row Stabilised

Type: SO 37 C-Z cast top

Tankers
16mm Base Plate SO 37 CZ 16mm
20mm Base Plate SO 37 CZ 20mm
CRN
Overall height
Imposed load
Gross comb. weight
Weight approx.
D-Value
24845
264 mm
20000 kgs
115000 kgs
389 kgs
162.4KN
Twin lockouts.
above on JSK 37 C-Z fifth wheel.
8/08

68
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts SO 37 C-Z
Fig.
Description
Part No
Fig.
Description
Part No.
SO 37CZ
SO 37CZ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
19
20
21
22
23
Lock jaw
Lock jaw spring
Locking bar
Locking bar bolt compl.
Lever
Operating handle
Head bolt
Wearing ring
Socket head bolt
Pedestal (185mm)
Pedestal (170mm)
Pedestal (150mm)
Mounting bracket
Split pin
Lubrication fitting
Adjusting Screw
Hexagon nut
Guide piece
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
1489-Z
847
2106-67
3205-06
3221-01
3105-18
3105-15
1513
3105-20
2105-19
2121-07
2104-01
2104-21
2104-02
1259
2105-25
1372
2121-15
1974
1989
1976
3105-05
2121-78
3205-07
24
25
28
29
30
31
32
33a
33b
33c
34
35
36
37
38
1,2,3,10,11
1,2,3
1,2,3,8
10,11,
13,14,16
28,29,30
Eye bolt compl.

Grease nipple
SK 2122-04
SK 3121-11
SK 3121-52

Spring for Latch
Ball bearing
Half moon compl.
Hex. bolt compl.
lock out pin compl.
Tube park
Tube lock out
SK 3521/03
SK 3121/59
SO1000-24
SK 3706-40
SK 3706-30
SK 3706-31
SK 3706-32
SK 3721-04
SK 3721-05
SK 3705-09
SK 3706-04
SK 3705-10
Repair Kits
SK 3221-50Z
SK 3221-52Z
SK 3121-50Z

Latch Kit
SK 2121-69Z
SK 3121-52 Kit
8/08

69
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Stabilised
Type: SO 37 E cast top
Application: Highway Freight

Tipper work
16mm Base Plate
SO 37 E 16mm
20mm Base Plate

SO 37 E 20mm
extra weight
D-Value
Overall height
Imposed load
Gross comb. weight
Weight approx.
CRN
162.4kN
244 mm
20000 kgs
115000 kgs
378 kgs
24838
Twin lockouts.
8/08

70
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

SO 37 E cast top
Fig.
1
2
3
4
5
6
7
8
9
10a
10b
11
12
13
13a
14
15
16
Description
Jaw
Jaw Spring
Jaw Pivot
Locking Bar
Lock Bar Bolt
Release Lever
Operating Handle
Head Bolt
Wear Ring Insert
Wear Ring Fixture
Wear Ring Bolt
Swivel Pin
Pedestal Bush
Collar
Swivel Pin Bolt
Swivel Pin Plug
Spring Latch
Fig.
1,2,3
32,33,34,35,36
1,2,3,8,11,10a,22
10a,10b,11
16,17,18
Part No.
SO 37 E
Fig.
SK 1489 Z
SK 847
SK 2106/67
SK 3205/06
SK 3221/01
SK 3105/18
SK 3105/15
SK 1513
SK 3105/20
SK 3105/92
SK 2105/19
SK 2121/07
SK 3104/05
SK 2905-20
SK 3105/95
SK 3121/28
JS 1101/12
SK 3121/52
17
18
19
20
21
22
23
24
25
26a
26b
26c
27
28
29
30
31
Description
Spring for Latch
Adjusting Screw
Hex Nut
Guide Piece
Eye Bolt Complete
Ball bearing
Half moon c/w 130mm Ped.
Hex. bolt compl.
Pin, compl.
Tube park
Tube lock out
Repair Kits
Repair
Repair
Repair
Repair
Repair
kit
kit
kit
kit
kit
for
for
for
for
for
Part No.
SO 37 E
SK 3521/03
SK 3121/59
SK 3105/97
SK 2121/78
SK 3205/07
SK 2122/04
SK 3108/02
SO 1000/24
SK 3705-11
SK 3706-30
SK 3706-31
SK 3706-32
SK 3721-04
SK 3721-05
SK 3721-07
SK 3706-04
SK 3705-10
Part No
locking device
locking device
locking device
wearing ring
spring latch
SK
SK
SK
SK
SK
3221-52 Z
3121-061
3121-060 Z
3105-94 Kit
3121-52 Kit
8/08

71
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting plates for

2 fifth wheel couplings
Selection table / Versions available

Order No.
B
(mm)
H
(mm)
L
(mm)
D value
(kN)
Imposed load
U (t)
MP 0115
MP 0118**
MP 0119
MP 2101
MP 2103-350
MP 4126
MP 4111-350**
MP 5111-350**
MP 6503-350
MP 1101-350
MP 1103-350
1050
1050
1050
970
1050
1050
1050
1050
1050
970
1050
12
16
20
22
22
40
40
50
65
100
100
710
710
710
710
710
850
665
710
710
710
710
152
260
260
152
152
260
190
162.4
162.4
152/108*
152/108*
20
20
20
20
20
20
20
20
20
20/15*
20/15*
Other mounting plates available on request

* 250 & 300mm pedestals only.
** Available in narrow width chassis
8/08

72
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
73
Mounting plates
Mounting height 12mm & 16mm
Drilling pattern according to

DIN standard 74081
and ISO 3842

DIN standard 74084
and ISO 3842
MP 0115
MP 0118
Weight approx. 72kg

D-value 162.4kN
Weight approx. 94kg

D-value 260kN
Options: Narrow width plate

Base Plate to suit JSK 42
Suitable for all fifth wheel couplings
according to DIN 74081 up to a mounting
height of 300 mm pedestals.
The mounting plates are suitable for all
types of semi-trailers with rear axle steering
systems.
Imposed load (12mm)
Imposed load (16mm)
20000 kgs
36000 kgs
*Note: Shear stops MUST be welded to

the front, rear and outside of pedestal feet.
(Refer to mounting example)

8/08

74
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting example
MP0115 / MP0118
welding process:
filler material:
alternative
welding process:
alternative
welding process:
The mounting plates must be adequately supported

in the area of the pedestals, i.e. by the chassis frame
or auxiliary frame or by transversal bracings.
or
or
E II
E 4320 B9 DIN 1913
MAG C
Griduct S-V5 green,

resp. Griduct S-V4
(Messer)
red
K 5, resp. K 52, resp.
K 56 (Westf. Union)
E MK 7, resp. E Mk 6
(Bohler)
Mounting instructions
When mounting the fifth wheels according to DIN standard 74081 onto a JOST mounting
plate, use 8 bolts M 16 preferably M 16 x 1,5 of at least grade 8.8 symmetrically positioned
to the longitudinal and transversal axis of the fifth wheel.
To fix the mounting plate on the vehicle chassis at least 4 resp. 6 bolts M 16, preferably M 16
x 1,5 or 4 x M 20, preferably M 20 x 1,5 are required on each side and row, grade at least 8.8.
To ease the shear load on the mounting bolts, stop blocks should be welded to both
sides of the pedestals and the front and rear of the mounting plate.
The fifth wheel plate must be able to move freely and must touch neither the mounting
plate nor the chassis or subframe.
The mounting instruction of the truck manufacturers and - if applicable - existing legal
regulations must be adhered to. The bolts must be checked for tightness.
JOST Mounting instructions for 2 fifth wheel couplings must be strictly adhered to.
Fit fifth wheel in accordance to AS/NZS 4968.2:2003 Installation of fifth wheel and
turntable assemblies.
8/08

75
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting plates
Mounting height 22 mm
Drilling pattern according

to
DIN standard 74081
and ISO 3842
MP 2101

to DIN standard 74081
and ISO 3842
MP 2103/350
Weight approx. 48kg
Weight approx. 44kg

according to DIN 74081 up to a mounting
height of 300 mm.
systems.
Imposed load
D-Value
20000 kgs
162.4kN
*Note: shear stops MUST be welded to

the front, rear and outside of pedestal feet.
(Refer to mounting example)
On special request mounting plates with special dimensions and special frame drilling patterns are available.
8/08

76
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting example
MP2101/MP2103
MP2101
MP2103
welding process:
filler material:
alternative
welding process:
alternative
welding process:
or
When mounting the fifth wheel coupling according
to DIN 74081 on to a mounting plate at least 8
bolts M 16, preferably M 16 x 1,5 grade at least
8.8 symmetrically positioned to the longitudinal
and transversal axis of the fifth wheel must be
used. Quantity of bolts required according to chart
opposite.
or
E II
E 4320 B9 DIN 1913
MAG C
Griduct S-V5 green,

resp. Griduct S-V4
(Messer)
red
K 56 (Westf. Union)
(Bohler)
Mounting height of fifth wheel

Coupl.
Max.mm . . . . . 250
300
D-value
kN . . . Max.162.4 max. 133
Bolt quantity
8
according to DIN
standard 74081
To fix the mounting plate on to the vehicle chassis at least 4 resp. 6 bolts M 16, preferably M 16 x
1,5 or 4 x M20, preferably M 20 x 1,5 are required on each side and row, grade at least 8.8.
To ease the shear load on the mounting bolts stop blocks should be welded to both sides of the
pedestals and to the front and rear of the mounting plate.
The fifth wheel plate must be able to move freely and must not touch the mounting plate or the
chassis or subframe.
The mounting instructions of the truck manufacturers and - if applicable - existing legal regulations must be
adhered to. The bolts must be checked for tightness.
Fit fifth wheel in accordance to AS/NZS 4968.2:2003 Installation of fifth wheel and turntable assemblies.
8/08

77
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting plates

DIN standard 74081
and ISO 3842

DIN standard 74081
and ISO 3842
MP 4111/350
MP 5111/350
Weight approx. 48kg
Weight approx. 57kg
D-Value 190kN
D-Value 162.4kN
Options: Narrow width plate available

according to DIN 74081 up to a
mounting height of 300 mm.
The mounting plates are suitable for
all types of semi-trailers with rear
axle steering systems.

8/08

78
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting example
MP 4111/350
MP 4111/350
MP 5111/350
MP 5111/350
welding process:
filler material:
alternative
welding process:
alternative
welding process:
or
or
When mounting the fifth wheel coupling according to DIN

74081 on to a mounting plate at least 8 bolts M 16,
preferably M 16 x 1,5 grade at least 8.8 symmetrically
positioned to the longitudinal and transversal axis
of the fifth wheel must be used. Quantity of bolts
required according to chart opposite.
To fix the mounting plate on to the vehicle chassis
at least 4 resp. 6 bolts M 16, preferably M 16 x 1,5
or 4 x M20, preferably M 20 x 1,5 are required on
each side and row, grade at least 8.8.
E II
E 4320 B9 DIN 1913
MAG C
Griduct S-V5 green,
resp. Griduct S-V4
red
(Messer)
K 56 (Westf. Union)
(Bohler)
Mounting height of fifth wheel

Coupl.
Max.mm . . . . . 250
300
D-value
kN . . . Max. 190 max. 162.4
Bolt quantity
8
according to DIN
standard 74081
To ease the shear load on the mounting bolts stop blocks should be welded to both sides of the
pedestals and to the front and rear of the mounting plate.
The fifth wheel plate must be able to move freely and must not touch the mounting plate or the
chassis or subframe.
The mounting instructions of the truck manufacturers and - if applicable - existing legal
The JOST mounting instructions for 2 fifth wheels must be adhered to.
8/08

79
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting plates
Mounting height 65mm
Mounting hole pattern

corresponds
MP 6503/350
Weight approx. 78kg
The mounting plates are suitable for all types of

semi-trailers with rear axle steering systems.
Imposed load
D-value
20,000 kg
162.4 kN
For fifth wheel couplings with mounting heights

between 200 mm and 250 mm the following
loads apply:
Imposed load
D-value
15 000 kg
108 kN

8/08

80
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting example
When mounting a fifth wheel coupling according to DIN 74081 on to a mounting plate at
least 8 bolts M 16, preferably M 16 x 1.5 grade at least 8.8 symmetrically positioned to
the longitudinal and transversal axis of the fifth wheel must be used.
To fix the mounting plate on to the vehicle chassis at least 4 resp. 6 bolts M 16,
preferably M 16 x 1.5 or 4x M 20, preferably M 20 x 1.5 are required on each side and row,
grade at least 8.8.
To ease the shear load on the mounting bolts stop blocks should be welded to both
sides of the pedestals and to the front and rear of the mounting plate.
The JOST mounting instructions for 2 fifth wheels must be adhered to.
8/08

81
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting plates

corresponds to DIN standard
74081
and ISO 3842

corresponds to DIN standard
74081
and ISO 3842
MP 1101/350
MP 1103/350
Weight approx. 79kg
Weight approx. 85kg

systems.
Imposed load
D-Value
20000 kgs
162.4 kN
For fifth wheel couplings with mounting

heights between 200 mm and 250 mm the
following loads apply:
Imposed load
D-value
15000 kg
108 kN
On special request mounting plates with special dimensions and special frame drilling patterns are available.
8/08

82
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting example
MP 1101 / 1103
welding process:
filler material:
alternative
welding process:
alternative
welding process:
or
or
E II
E 4320 B9 DIN 1913
MAG C
Griduct S-V5 green,
resp. Griduct S-V4
(Messer)
red
K 56 (Westf. Union)
(Bohler)
When mounting a fifth wheel coupling according to DIN 74081 on to a mounting plate at
least 8 bolts M 16, preferably M 16 x 1,5 grade at least 8.8 symmetrically positioned to
the longitudinal and transversal axis of the fifth wheel must be used.
To fix the mounting plate on to the vehicle chassis at least 4 resp. 6 bolts M 16,
preferably M 16 x 1,5 or 4 x M 20, preferably M 20 x 1,5 are required on each side and
row, grade at least 8.8.
The fifth wheel plate must be able to move freely and must not touch the mounting plate
or the chassis or subframe.
8/08

83
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting plate summary

for fifth wheel couplings up to 20000 kg
imposed load
Type MP 0118
36000 kg
260 kN
20000 kg
162.4 kN
22
Imposed load
D-value
150
170
185
250
300
Type MP
2101/2103/350
172
192
207
272
322
16
Imposed load
D-value
166
186
201
266
316
130
150
170
185
195
205
215
235
255
20000 kg
162.4 kN
130
150
170
185
195
205
215
235
255
Imposed load
D-value
162
182
197
262
312
Type MP 0115

8/08

84
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
150
170
185
250
300
20000 kg
190 kN
Type MP 5111/350
20000 kg
162.4 kN
50
Imposed load
D-value
200
220
235
300
350
150
170
185
250
300
40
Imposed load
D-value
190
210
225
290
340
Type MP 4111/350
250
270
285
350
150
170
185
250
Type MP 1101/1103
Imposed load 20000 kg
D-value
For fifth wheel couplings
250 mm mounting height.
D-value
108 kN
8/08

85
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
LubeTronic
Lubrication of the wheel coupling

Guaranteed safe and automatic for 3 years
JOST, the market leader in the area of couplings for trucks and trailers, remains on its
innovative course. The new development LubeTronic saves time and money and simplifies
the day-to-day life of drivers and freight forwarding companies.
Always lubricates safely
Simple maintenance
The special coating on the lock jaw makes the

surface extremely durable. This allows the lock jaw to
be operated with a minimal amount of lubricant.
LubeTronic is easy to mount
Excellant emargency running properties allow the

coating to handle short-term operating even without
lubricant.
Outstanding lubricant qualities thanks to novel
lubricants from high-performance grease and
continuous lubrication.
Temperature range: -20C to +70C
Electronic dose dispensing reduces both costs and
enviromental impact
Completely sealed and immersion tested (IP 68)
Self-regulating system with electronic monitoring

signal on the cartridge
Guaranteed 3 year life span
Maintenance time savings
Potential upgrading of all low-maintenance couplings
Very light and compact
With shockproof metal bracket
Not recommended for usage in the construction
industry
Repair kit (complete) with cartridge:
Order No. SKE004070000
8/08

86
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
LubeTronic
Less Maintenance - Greater Safety

JOST, the market leader in the area of couplings for trucks and trailers, remains on
its innovative course. The new development LubeTronic saves time and money and
simplifies the day-to-day life of drivers and freight forwarding companies.
The first product innovation for 2005 is the LubeTronic, a retrofit kit for a maintenancefree fifth wheel. The lock of the fifth wheel holds the king pin firmly in place; it used
to be one of the last maintenance-intensive elements in the system. LubeTronic
allows this system to run practically maintenance-free for three whole years. THe
grease is discharged in a electronically controlled manner; the lock and king pin are
always optimally lubricated. JOST guarantees automatic and safe operation of the
LubeTronic for three years. The lubrication cartridges discharges its lubricant in a
constant, uniform manner over a wide temperature range from -20 to +70 degrees
Celsius and the entire system has been underwater-tested according to IP 68.
Simple Assembly - Significant Action
The LubeTronic retrofit kit includes a specially coated lock, which, together with the
electronically regulated lubrication cartridge, is a system patented by JOST. The
coating makes the surface of the lock particularly resistive and durable, so that
even minimal quantities of the lubricating grease are suffient. This is efficient and
eco-friendly at the same time. The coating is so efficient that it even allows running
without lubricant for short periods, although this is not recommended!
The lock holds the king pin and with it, the entire support system, coupled firmly
with the traction engine. So far, regualar lubrication by hand or by means of an
expensive central lubrication was required, because the lock and king pin wear
quickly without lubrication and have to be replaced. The traditional lubrication aids
- which are mostly lubricating cartridges operated with overpressure - discharge
grease smoothly and uniformly only within a narrow temperature range. All the
maintenance procedures for the fifth wheel, which are not only uncomfortable
and time-consuming, but above all, relevant for safety, are rendered redundant by
LubeTronic.
LubeTronic will be available from Jost Australia Pty Ltd from June 2005 onwards.
Simultaneously, a lock retrofit kit will also be made available. Retrofitting, involving
simple assembly, is possible on all maintenance-free fifth wheels (JOST W models).
With LubeTronic, the entire couplings runs with optimum lubrication.
8/08

87
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Easy Connect
Fast, simple, secure

Coupling and uncoupling without the need
to raise or lower the unit
Fast and easy attachment and disconnection
of pneumatic and power cables.
Part No: SKE 0105000000
Access from side of vehicle to alleviate

OH & S issues
Easy Connect is universal and directly fits
most trailer models
Prevents damage to spiral connections
(suzies, see illustration below)
8/08

88
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
89
Heavy duty fifth wheel

couplings
31/2 and 2
90
Locking device
locked with spring hook inserted
set for coupling
hole to use when

locking open the
operating handling when
exchanging lock jaw
type of mounting
JSK 38 G and
JSK 38 G cardan mounting
wear resistant bushes
lateral movement up to a max.
of 7 for off road operation.
lateral movement can be limited to
approx. 0 for highway operation.
JSK 38 C
JSK 38 C rubber mounting
shock absorbing by large rubber pads
slack and maintenance free
8/08

91
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Operating and
Maintenance instructions
for JOST fifth wheel couplings

types JSK 38 C, JSK 38 G and JSK 50
Operating instructions
The outfit should be parked on a flat and even road surface.
Coupling-up:
1. The fifth wheel must be in the reset position, i.e. the end of the operating handle standing out approx. 300 mm otherwise:
Raise lock catch (A) and move handle forward to unlock (B). Pull handle to end position (C).
2. Skid plate of semi trailer should be approx. 50 mm lower than the top of the fifth wheel.
IMPORTANT: Loss of pressure in the air suspension of the trailer can alter the height of the king pin.
3. Reverse tractor - the mechanism locks automatically.
4. Check that the skid plate is resting on the fifth wheel plate with no gap between the two.
5. Ensure lock catch is engaged.
IMPORTANT: The lock catch in the secured position ensure locking mechanism is closed. If lock catch is in raised
position, the coupling-up procedure must be repeated.
Un-coupling:
1. Raise lock catch (A). Move handle forward to unlock (B). Pull handle to end position (C).
2. drive tractor away. The fifth wheel mechanism will automatically assume the coupling-up position (D).
Lateral movement on type JSK 38 G and JSK 38 G-1

The lateral movement should only be release for off-road use. On the road, and especially at higher speeds, it
must be blocked for safety reasons.
To set the lateral movement:

For normal road Use:
For off-road use:
1.
2.
3.
1.
2.
3.
Release the hex bolts (2 each side - width over flats 19 mm).
Push both blocks into the end of the oblong hole.
Re-tighten hex bolts (torque 80 Nm).
Release the hex bolts (2 each side - width over flats 19 mm).
Pull both blocks out to the end of the oblong hole.
Re-tighten the hex bolts (torque 80 Nm).
Maintenance instructions:
1. Uncouple semi-trailer at least once a week, certainly after more than 5000 km. Clean semi-trailer skid plate and
fifth wheel plate. Lubricate fifth wheel plate, locking mechanism, fifth wheel throat and king pin, with heavy duty
grease. We recommend the use of high pressure grease (EP) with MoS2 or graphite additive, for example BP L21,
M, BP HTEP 1, BP LS 2, Esso universal grease M, Shell Retinax AM. Check operating handle and release lever
pivots for free movement - clean and lubricate.
2. The bearings of the lock lever (item 28) and of the pedestals of the JSK 38 G-1 and the pivot bearing of the
JSK 50 are to be regreased through grease nipples provided at each maintenance interval.The rubber cushions of
the JSK 38 C-1 are maintenance free. According to operating conditions we recommend checking parts for wear
at 50,000 and 100,000 km distance driven.
8/08

92
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
93
Heavy duty fifth wheel couplings

rubber bearing
31/2
JSK 38 DV90
A heavy duty fifth wheel coupling

for operation under arduous
conditions.
Increased load (up to 28,000kg).
With rubber bearing (model C):
rubber cushions are shockabsorbent and maintenance-free.
Technical specification:
Rubber bearing
The fifth wheel coupling complies
with the directives/standards as
per 94/20/EC - Class S, DIN 74084
and ISO 3842. Suitable for 3,5
(90) king pins as per 94/20/EC, DIN
74083 and ISO 4086. Fitted on a
mounting plate.
Imposed weight
28,000kg
D-value
260kN
Weight
204kg
CRN
36688
8/08

94
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

fifth wheel couplings type JSK 38 DV90
Fig.
Description
Part No.
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Socket head bolt

Wearig ring, complete
Spring noose, complete
Clamping pin
Latch, complete
Hexagon bolt, complete
Locking bar
Bar bolt, complete
Lever
Bearing
Washer
SK 2421-08
SK 2421-56
SK 2921-30
000.003.027
SK 3121-52
SK 3521-03
SKE003750000
SKE003760001
SK 2405-23
SK 2405-24
SK 2405-15
SK 2421-52
SK 2405-19
14
15
16
17
18
19a
19b
19c
20
21
22
23
Spring noose
Lock jaw
Bolt
Handle
Pedestal 160mm
Pedestal 190mm
Pedestal 250mm
Rubber cushion, upper
Rubber cushion, lower
Bridge
SK 2405-09
SK 2405-53
SK 2405-14
SK 2405-18
SKE003740000
SK 2404-05
SK 2404-01
SK 2404-04
SK 2006
SK 2007
SK 2005
SK 2421-55
8/08

95
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

rubber mounting
31/2 and 2
JSK 38 C-1
JSK 38 C-2
with mounting pattern according to DIN standard 74081 and 74084
A heavy duty fifth wheel coupling for

The well known JOST locking device
together with the maintenance free
rubber cushions ensures a high degree
of stability and safety on the road.
This fifth wheel is available for use with
31/2 and 2 king pins.
The conversion of a 31/2 or 2 locking
mechanism or vice versa can easily be
carried out with standard tools, without
removing the fifth wheel coupling from
the truck.
TWO HEIGHT OPTIONS
160mm optional (Bolt on/weldable feet)
190mm optional (Bolt on/weldable feet)
Type
JSK 38 C-1
JSK 38 C-2
King
pin
Imposed
load
D-value
Weight
CRN
31/2
2
36 000kg
36 000kg
260kN
216kN
190kg
190kg
24329
16913

8/08

96
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

type JSK 38 C-1
fifth wheel couplings type JSK 38 C-1-2
Fig.
Description
Part No.
1
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
27
27
27
28
Socket head bolt

Wearing ring 31/2, compl. with 01
Wearing ring 2, compl. with 01
Nut and bolt
Lubrication tube
Lubrication tube, compl. with 06
Cable tie
Tension spring
Latch
Guide plate
Spring hook, compl.
Clamping pin
Latch holder, compl. with 14
Latch, compl.
Locking bolt
Bar bolt, compl.
Lever
Bearing
Washer
Spring noose
Lock jaw
Lock jaw, 31/2 (Greaseable)
Lock jaw, 2
Lock jaw, 2 (Greaseable)
Bolt
SK 2421-08
SK 2421-56
SK 2421-57
SK 1976
SK 2205-12
SK 2408-02
SK 3121-13
SK 2106-01
SK 2421-51
SK 2405-27
SK 2405-22
SK 2421-50
SK 1436
SK 2921-30
000.003.027
SK 2405-084
SK 3121-52 Kit
SK 3521-03
SK 2405-01
SK 2121-14
SK 2405-23
SK 2405-04
SK 2405-15
SK 2421-52
SK 2405-19
SK 2405-09
SK 2421-53
SK 2405-14
SK 2405-14Z
SK 2405-13
SK 2405-13Z
SK 2421-54
Fig.
29
30
31
32
33
34
35a
35b
35c
36
37
38
39
Description
Handle (standard version)
Locking bar for type J
Latch cord, compl. f. type J
Hexagon bolt, compl. f. type J
Handle for type J
Handle
Pedestal 160mm
Pedestal 190mm
Pedestal 250mm
Bridge
Part No.
SK 2405-066
SK 2405-067
SK 3521-02
SK 2421-50
SK 3105-113
SK 2405-066
SK 2404-05
SK 2404-01
SK 2404-04
SK 2006
SK 2007
SK 2005
SK 2421-55
Repair Kits
1,2,7
12,20,
27,28
1,2,7,
12,20,
27,28
36,37,
39
1,2,7,
27
1,2,7,
27
31,32,
34
Repair kit
for lock 31/2
SK 2421-76
Repair kit
for lock 2
SK 2421-77
Repair kit
for bearing
SK 2421-78
Conversion Kits
Conversion kit
from 31/2 to 2 lock
Conversion kit
2 to 31/2
Handle extension
retrofit kit, compl.
SK 2421-98
SK 2421-99
SK 3121-063
8/08

97
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Cardan mounting
31/2 and 2
JSK 38 G-1
JSK 38 G-2
with mounting pattern according to DIN 74 081 and 74 084
A heavy duty fifth wheel coupling for operation

under arduous conditions.
The lateral movement of 7 can be reduced to
0 for normal road operation.
This fifth wheel is available for use with 31/2 &
2 king pins.
The conversion of 2 & 31/2 locking mechanism
or vice versa can easily be carried out with
standard tools, without removing the fifth
wheel coupling from the tractive unit. Suitable
for all types of rear axle steering systems.
Type
JSK 38 G-1
JSK 38 G-2
King
pin
Imposed
load
D-value
Weight
CRN
31/2
2
36 000kg
36 000kg
260kN
216kN
265kg
265kg
24327
16917


98
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

type JSK 38 G-1
fifth wheel couplings type JSK 38 G-2
Fig.
1
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
23
24
25
26
27
28
29
30
31
32
33
Description
Socket head cap screw
Wearing ring 31/2 compl. with item 1
Wearing ring 2 compl. with item 1
Grease tube
Schmierleitung, compl. with item 6
Tubing clamp
Guide plate up to series 70
Hexagon head bolt comp.
Spring hook/chain up to series 70
Latch plate compl. with 11 from series 72
Split pin
Spring compl. with spacer from series 72
Latch compl. from series 72
Bolt compl. form series 72
Cover plate
Thrust spring
Clamping sleeve
Block
Hexagon bolt
Lock jaw spring
Hexagon head bolt compl.
Pin
Lock jaw 31/2
Lock jaw 2
Pivot bolt
Pivot bolt compl.
Locking bar
Lever
Support
Disc
Spring loop
Part No.
SK 2421-08
SK 2421-56
SK 2421-57
SK 1976
SK 1989
SK 2408-02
SK 3121-13
SK 2405-22
SK 2421-50
SK1436V
SK 2405-084
000.003.027
SK 2921-30
SK 3121-52
SK 3521-03
SK 2506-22
SK 2506-15
SK 2521-10
SK 2506-35
SK 2521-50
SK 2106-01
SK 2421-51
SK 2405-27
SK 2405-14
SK 2405-13
SK 2405-18
SK 2121-14
SK 2405-01
SK 2405-23
SK 2405-04
SK 2405-15
SK 2421-53
SK 2405-19
SK 2405-09
SK 2421-52
Fig.
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
Description
Operating handle
Handle
Hexagon bolt
Hexagon bolt
Security plate
Distance ring
Plate
Seal
Bush
Pedestal with 42, 44, 46
Dowel pin
Lock lever compl.
Grease nipple
Distance plate
Circlip
Pivot
Lock
Security plate
Grease nipple
Extended handle lower part
Hexagon bolt
Latch cord compl.
Extended handle grip
Part No.
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
2405-66
2405-066
2034
2521-18
2504-21
2504-14
2504-18
2521-07
2504-16
2521-52
1533
2521-51
2521-04
1192-1
1435
2504-17
2504-19
2504-20
2521-57
2405-067
2421-50
3521-02
3105-113
Repair kits
1,2,5,
9,20,23
24,27
1,2,5,
9,20,23,
24,27
35,54,
55
Repair kit
for locking device 31/2
SK 2421-76
Repair kit
for locking device 2
SK 2421-77
Handle extension
SK 3121-063
Conversion kits
1,2,
20,23
Conversion from
3 pin to 2 pin
SK 2421-98
1,2,
20,23
Conversion from
2 pin to 31/2 pin
SK 2421-99
8/08

99
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

fifth wheel assembly 2 or 31/2
Type LP 38 C-1-16 Cast top
Type LP 38 C-2 -16 Cast top
Type LP 38 C-1-16/160 Cast top

Type LP 38 C-2 -16/160 Cast top
Heavy duty
Applications: Stock crate
Fridge van
General freight
Tankers
LP 38 C 20mm
D-Value JSK 38 C1W
260kN
JSK 38 C2W
216kN
Overall height 274 mm(with 190mm Feet)
244 mm(with 160mm Feet)
Imposed load
21000 kgs
Gross comb. weight
115000 kgs
Weight approx.
444 kgs
CRN
C1-24837
CRN
C2-24834
Twin lockouts.
Cast type unit equipped with JSK
38 fifth wheel extra heavy duty
unit. Jaws sizes can be changed
from 50 mm or 90 mm diameter.
8/08

100
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts
LP 38 C- Cast top
Fig.
1
1
2
3
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24a
24b
24c
Description
Socket head bolt
Lock jaw 31/2
Lock jaw 2
Lock jaw spring
Bolt complete
Stopper
Hexagon head bolt
Locking bar
Lever
Disc
Spring loop
Guide plate
Operating handle
Locking bar bolt
Support
Hexagon head bolt complete
Spring hook complete
Grease tube
Pedestal 160 mm Bolt on/weldable
Part No.
SK 2421-56
SK 2421-57
SK 2421-08
SK 2405-14
SK 2405-13
SK 2106-01
SK 2421-54
SK 2405-27
SK 2421-51
SK 2405-01
SK 2405-04
SK 2405-19
SK 2405-09
SK 2405-22
SK 2405-02
SK 2121-14
SK 2405-23
SK 2405-15
SK 2421-53
SK 2421-52
SK 2421-50
SK 1436
SK 1976
SK 2205-12
SK 2006
SK 2404-05
SK 2404-01
SK 2404-04
Fig.
Description
Part No
Fig.
Description
Part No
29
30
31
32
Ball bearing
Half moon compl.
Hex. bolt compl.
KDL 900-6
SK 3706-29
SK 3706-16
SK 3721-04
33
34
35
36

lock out pin compl.
Tube park
Tube lock out
SK
SK
SK
SK
Fig.
25
26
26a
27
Description
Mounting bracket
For use with 160mm pedestals
Hexagon head bolt
Part No.
SK 2007
SK 2005
SK 2005-1
SK 2421-55
1,3,4,
5,15,
20
Repair kit
SK 2421-76
1,3,4,
5,15,
20
Repair kit
SK 2421-77
23,25
27
Repair kit for

rubber bearing
SK 2421-78
Repair Kits
Conversion Kits
28a
28b
Kit to convert 31/2

to 2 locking mechanism
SK 2421-98
Kit to convert 2
to 31/2 locking mechanism
SK 2421-99
3721-05
3706-10
3706-04
3706-05
8/08

101
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

fifth wheel assembly 31/2
Type LP 38 DV 160 16 Press top
Type LP 38 DV 190 16 Press top
Heavy duty
Fridge van
General freight
Tankers
D-Value
Overall height
260kN
Imposed load
21000 kgs
Gross comb. weight
115000 kgs
Weight approx.
458 kgs
CRN
36688
Twin lockouts.
in chassis mounting zone. Press
type unit equipped with JSK 38
fifth wheel extra heavy duty unit.
8/08

102
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

fifth wheel couplings type LP 38 DV90
Fig.
Description
Part No.
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Socket head bolt

Clamping pin
Latch, complete
Locking bar
Bar bolt, complete
Lever
Bearing
Washer
SK 2421-08
SK 2421-56
SK 2921-30
000.003.027
SK 3121-52
SK 3521-03
SKE003750000
SKE003760001
SK 2405-23
SK 2405-24
SK 2405-15
SK 2421-52
SK 2405-19
14
15
16
17
18
19a
19b
19c
20
21
22
23
Spring noose
Lock jaw
Bolt
Handle
Pedestal 160mm
Pedestal 190mm
Pedestal 250mm
Bridge
SK 2405-09
SK 2405-53
SK 2405-14
SK 2405-18
SKE003740000
SK 2404-05
SK 2404-01
SK 2404-04
SK 2006
SK 2007
SK 2005
SK 2421-55
Fig.
Description
Part No
Fig.
Description
Part No
24
25
26
27
Ball bearing
Half moon compl.
Hex. bolt compl.
KDL 900-6
SK 3706-29
SK 3706-16
SK 3721-04
28
29
30
31

lock out pin compl.
Tube park
Tube lock out
SK
SK
SK
SK
3721-05
3706-10
3706-04
3706-05
8/08

103
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

rubber mounting
31/2 and 2
DR 38 C-1, DR 38 C-2,
DR 38 C-1/160, DR 38 C-2/160
Heavy duty
Fridge van
General freight
Tankers
DR 38 C 20mm
D-Value JSK 38 C1W
260kN
JSK 38 C2W
216kN
Overall height 308 mm(with 190mm Feet)
Imposed load
20000 kgs
Gross comb. weight
115000 kgs
Weight approx.
472 kgs
CRN
38C1-24843
CRN
38C2-24841
Twin lockouts.
Cast type unit equipped with JSK
38 fifth wheel extra heavy duty
unit . Jaws sizes can be changed
from 50 mm or 90 mm diameter.


104
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

DR 38 C-1, DR 38 C-2,
DR 38 C-1/160, DR 38 C-2/160
Fig.
1
1
2
3
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24a
24b
24c
Description
Socket head bolt
Lock jaw 31/2
Lock jaw 2
Lock jaw spring
Bolt complete
Stopper
Hexagon head bolt
Locking bar
Lever
Disc
Spring loop
Guide plate
Operating handle
Locking bar bolt
Support
Grease tube
Part No.
SK 2421-56
SK 2421-57
SK 2421-08
SK 2405-14
SK 2405-13
SK 2106-01
SK 2421-54
SK 2405-27
SK 2421-51
SK 2405-01
SK 2405-04
SK 2405-19
SK 2405-09
SK 2405-22
SK 2405-02
SK 2121-14
SK 2405-23
SK 2405-15
SK 2421-53
SK 2421-52
SK 2421-50
SK 1976
SK 2205-12
SK 2006
SK 2404-05
SK 2404-01
SK 2404-04
Fig.
25
26
26a
27
Description
Mounting bracket
For use with 160mm pedestals
Hexagon head bolt
Part No.
SK 2007
SK 2005
SK 2005-1
SK 2421-55
1,3,4,
5,15,
Repair kit
SK 2421-76
1,3,4,
5,15,
Repair kit
SK 2421-77
23,25
27
Repair kit for

rubber bearing
SK 2421-78
Repair Kits
Conversion Kits
28a
Kit to convert 31/2

to 2 locking mechanism
SK 2421-98
28b
Kit to convert 2
to 31/2 locking mechanism
SK 2421-99
Fig.
Description
Part No
Fig.
Description
Part No
29
30
31
31b
32
Ball bearing
Half moon compl.
Hex. bolt compl.
DK 90-14
SK 3704-40
SK 3706-31
SK 3706-32
SK 3721-04
33
34
35
36

lock out pin compl.
Tube park
Tube lock out
SK
SK
SK
SK
3721-05
3705-09
3706-04
3705-10
8/08

105
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

rubber mounting
31/2
DR 38 DV 190/16 & DR 38 DV 160/16

Heavy duty
Fridge van
General freight
Tankers
D-Value
Overall height
260kN
Imposed load
20000 kgs
Gross comb. weight
115000 kgs
Weight approx.
486 kgs
CRN
36819
Twin lockouts.
in chassis mounting zone. Press
type unit equipped with JSK 38
fifth wheel extra heavy duty unit.


106
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

fifth wheel couplings type DR 38 DV 90
Fig.
Description
Part No.
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Socket head bolt

Clamping pin
Latch, complete
Locking bar
Bar bolt, complete
Lever
Bearing
Washer
SK 2421-08
SK 2421-56
SK 2921-30
000.003.027
SK 3121-52
SK 3521-03
SKE003750000
SKE003760001
SK 2405-23
SK 2405-24
SK 2405-15
SK 2421-52
SK 2405-19
14
15
16
17
18
19a
19b
19c
20
21
22
23
Spring noose
Lock jaw
Bolt
Handle
Pedestal 160mm
Pedestal 190mm
Pedestal 250mm
Bridge
SK 2405-09
SK 2405-53
SK 2405-14
SK 2405-18
SKE003740000
SK 2404-05
SK 2404-01
SK 2404-04
SK 2006
SK 2007
SK 2005
SK 2421-55
Fig.
Description
Part No
Fig.
Description
Part No
29
30
31
32
Ball bearing
Half moon compl.
Hex. bolt compl.
DK 90-14
SK 3704-40
SK 3706-31
SK 3721-04
33
34
35
36

lock out pin compl.
Tube park
Tube lock out
SK
SK
SK
SK
3721-05
3705-09
3706-04
3705-10
8/08

107
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Heavy duty fifth wheel

coupling 31/2 Pivot bearing
JSK 50
A heavy duty fifth wheel for arduous

conditions
D rating 300 kN
imposed load up, to 50.000 kg.
JOST self-adjusting locking device for 31/2
King pins.
Suitable for all types of rear axle steering
systems.
Weight: 290 Kg.
Bolt on type Pedestals
CRN
24502

8/08

108
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

type JSK 50
fifth wheel coupling
Fig.
Description
Part No.
Fig.
Description
Part No.
1
2
3
4
5
6
7
9
10
11
12
13
14
15
15a
16
17
18
19
20
21
22
Socket head bolt

Wearing ring 31/2, compl. with 1
Nut and bolt
Lubrication tube
Guide plate
Spring hook, complete
Latch holder, compl. with 10
Clamping pin
Latch, complete
Tension spring
Lock jaw 31/2
Lock jaw 31/2 to suit grease nipple
Bolt, complete
Locking bolt
Bar bolt, complete
Lever
Bearing
SK 2421-08
SK 2421-56
SK 1976
SK 1989-003
SK 2405-22
SK 2421-50
SK 1436
SK 2405-084
000.003.027
SK 2921-30
SK 3121-52
SK 3521-03
SK 2106-01
SK 2405-14
SK 2405-14Z
SK 2421-54
SK 2405-01
SK 2121-14
SK 2405-23
SK 2405-04
SK 2421-52
SK 2405-15
23
24
25
26
27
28
29
30
31
32
33
34
35
Washer
Spring noose
Latch
Handle
Bearing bushing
Cylindrical notched pin
Pivot pin
Locking bolt
Plate
Grease nipple
Pedestal, compl. with 29 + 30
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
SK
2405-19
2405-09
2421-53
2421-51
2405-27
2405-066
2805-03
1533
2805-01
2521-05
2805-02
2521-04
2821-51
Repair Kits
1,2,5,7, Repair kit for lock 31/2
12,20,
27,28
SK 2421-76
Conversion Kits
31,32,
34
Handle extension retrofit kit, complete

SK 2821-51
Note: Now Available with Automatic Secondary Locking

8/08

109
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting plates
for heavy duty fifth wheel couplings
Mounting height 16 mm and 20mm
For fifth wheel couplings with mounting pattern

according to DIN 74084, for example JSK 38C-1
and JSK 38G-1

and ISO 3842

and ISO 3842

DIN standard 74084
and ISO 3842
MP 0118
MP 0118/JSK 38
MP 0119
Weight approx. 94kg
- (use for JSK 38 with

160mm pedestals)
Weight approx. 120kg
Weight approx. 90kg

systems.
Suitable for fifth wheel couplings up to 290
mm mounting height.
Imposed load
D-Value
36000 kgs
260 kN
For fifth wheel couplings with JOST mounting

pattern according to JOST standard type JSK 38C
and JSK 38G.
8/08

110
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting example
welding process:
filler material:
alternative
welding process:
alternative
welding process:
or
or
E II
E 4320 B9 DIN 1913
MAG C
Griduct S-V5 green,
resp. Griduct S-V4
(Messer)
red
K 56 (Westf. Union)
(Bohler)
When mounting the fifth wheel according to DIN 74084 on to a JOST mounting plate use
12 bolts M 16, preferably M 16 x 1,5 grade at least 8.8, respectively M 20, preferably M 20 x
1,5 for JSK 38 C-1 and JSK 38 G-1.
To fix the mounting plate on to the vehicle chassis at least 6 bolts M 16 x 1,5, preferably M
16 x 1,5, grade at least 8.8 respectively 4 x 20, preferably M 20 x 1,5 are required on each
side.
To ease the shear load on the mounting bolts stop blocks should be welded to both sides
of the pedestals and to the front and rear of the mounting plate. The fifth wheel plate
must be able to move freely and must touch neither the mounting plate nor the chassis
or subframe.
8/08

111
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting plate
Mounting height 40mm
For fifth wheel couplings with mounting pattern

according to DIN 74084, for example JSK 38C-1 and
JSK 38G-1
The mounting plates are suitable for all types

of semi-trailers with rear axle steering systems.
Suitable for fifth wheel couplings up to 290 mm
mounting height.
Imposed load
36000kg
D-value
260 kN

DIN standard 74084
and ISO 3842
MP 4126
Weight approx. 81kg
For fifth wheel couplings with JOST mounting

pattern according to JOST standard type JSK 38C
and JSK 38G

8/08

112
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting example
welding process:
filler material:
alternative
welding process:
alternative
welding process:
or
or
E II
E 4320 B9 DIN 1913
MAG C
(Messer)
Griduct S-V5 green,

resp. Griduct S-V4
red
K 56 (Westf. Union)
(Bohler)
When mounting the fifth wheel according to DIN standard 74084 onto a JOST mounting
plate use 12 bolts M 16 preferably M 16 x 1,5 grade at least 8.8 respectively M 20
preferably M 20 x 1,5 for JSK 38 C and JSK 38 G.
To fix the mounting plate on to the vehicle chassis at least 6 bolts M 16, preferably M 16
x 1,5, grade at least 8.8 respectively 4 x M 20, preferably M 20 x 1,5 are required on each
side.
8/08

113
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

up to 36000 kg imposed load
JSK 38 C Height Variations

Type MP
0118

D-value
260 kN
Type MP
0119

D-value
260 kN
Type MP
4126

D-value
260 kN
8/08

114
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

up to 36000 kg imposed load
JSK 38 GI height variations

Type MP
Imposed load
D-value
Type MP
0118
36000 kg
260 kN
0119

D-value
260 kN
Type MP
4126

D-value
260 kN
8/08

115
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Sliders for fifth

wheel couplings
116
117
Slider for
JSK SL
Standard and XXL
Multi-purpose
Lightweight, compact and robust
Fifth wheel coupling position freely adjustable in

50mm steps
- optimum shaft load and load distribution
- total traction length setting
25% lighter than its predecessors
4 construction heights: 173, 203, 220 or 263mm
Cathodic electrophoretic painting for optimum anti

corrosion
Greater degree of travel with smaller external

dimensions
Can be attached to all standard vehicle types

Equipped with the tried and tested fifth wheel
couplings JSK 37 E, JSK 37 EW or JSK 36 D
Top safety standards

Self-locking mechanism, protected against accidental
opening
Easy Mounting and operation

Elbow lever principle for greater locking force
All standard customer hole patterns available ex
works
Fourfold, interlocking lock between the carriage and

slider frame
Easy to mount with a hexagonal bolt

Forged gear tooth rows
Base plate to suit narrow or standards spec
chassis
Cast pedestals
8/08

118
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
JSK SL
Technical Specifications
Standard
XXL
Technical specifications
Version
Mounting height
(mm)
Permitted imposed load

(t)
D value
(kN)
Weight minus
fifth wheel coupling (kg)
CRN
Standard
XXL
173/203/220/263
173/203/220/263
20t
20t
190kN
190kN
approx. 118kg
approx. 139kg
36820
36820
8/08

119
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Order key for JSK SL

Components and variantes
Part No.
JSK
JSK
JSK
JSK
JSK
JSK
JSK
JSK
JSK
JSK
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
SLE
04521AA
03223AA
03224AA
04520BC
04520BD
04521BC
04523AA
032X8AA
045X8AA
07321AA
Fifth Wheel
Height (mm)
Width (mm)
JSK
JSK
JSK
JSK
JSK
JSK
JSK
JSK
JSK
JSK
203
173
173
203
203
203
203
173 (XXL)
203 (XXL)
263
Undrilled
Undrilled
Undrilled
880
930
880
Undrilled
Undrilled
Undrilled
Undrilled
37EW
37E
3EW
37E
37E
37EW
37E
37E
37E
37EW
8/08

120
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
JSK SL
Technical Specifications
Technical Specification
The slider with integral JOST series JSK 37 E or 36
D fifth wheel coupling is designed for 2 king pins
(50) as per EG 94/20, DIN 74080, ISO 337.
Technical Data
D value (kN)
Imposed load U (t)
CRN
190
20
36820
8/08

121
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Slider for
Type EV M
All normal fifth wheel couplings can be mounted on the sliding device. Standard mounting holes for the fifth
wheel coupling according to DIN standard 74081 and ISO 3842 are provided.
Load on main plate

Total weight of
articulated unit (GCM)
Weight approx.
(without fifth wheel)
D-value
CRN
For use with JSK 36 CV/150
18,000 kg
135,000 kg
180 kg
190 kN
26167
D-value
190 kN
CRN
26169
For use with JSK 37 CZ/150
Base plate to suit European or standard spec
The above loads apply to operation on ordinary roads and ordinary operating conditions as
they are to be found in Europe. If the fifth wheels are being operated in other territories or
under other conditions we would ask you to contact us regarding the type of fifth wheel to
be used.
8/08

122
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts EV M
sliding fifth wheel
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Locking plunger
Handle, compl.
Spring
Spring retainer
Pin
Lever
Tension spring
Lever
Operating handle
Hexagon screw, compl.
Washer with split pin
Spring spacer, clamping sleeves
Latch, compl.
Slide Upper Part
V 1005-01
V 1005-35
V 1005-03
V 1005-04
V 1005-05
V 1005-48
SK 1238/1
V 1005-139
V 1005-183
V 1021-49
V 1021-09
V 1021-10
V 1021-50
V 1005-213
V 1021-06
V 1002-020
8/08

123
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Slider for
Air-operated
Type EV P
All normal fifth wheel couplings can be mounted on the sliding device. Standard mounting holes for
the fifth wheel coupling according to DIN standard 74081 and ISO 3842 are provided.
Load on main plate

18,000 kg
Total weight of
articulated unit
135,000 kg
Weight approx.
175 kg
(without fifth wheel)
D-value
190 kN
CRN
26168
For use with JSK 36 CV/150
D-value
190 kN
CRN
26170
For use with JSK 37 CZ/150
Base plate to suit European or standard spec
The complete pneumatic actuating device (items 9 to 14 of spare parts list shown overleaf) is supplied.
The above loads apply to operation on ordinary roads and ordinary operating conditions as they are to found
in Europe. If the fifth wheels are being operated in other territories or under other conditions we would ask
you to contact us regarding the type of fifth wheel to be used.
8/08

124
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for EV P

slider
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Slider base plate 23

Slider upper part
Locking plunger
Air-cylinder
Spring
Spring retainer
Pin
Air control valve, compl.
Fitting
Fitting
Fitting
Pipe plug
Nylon airline
V
V
V
V
V
V
V
V
V
V
V
V
V
V
1001-006
1002-06
1005-01
1021-05
1005-03
1005-04
1005-05
1021-06
1021-18
1021-13
1021-14
1021-15
1021-17
1021-16
8/08

125
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Dual height
fifth wheel system
Type DH 200
For overhieght loads ie. European

Containers
Load on main plate
15,000 kg
Total weight of
articulated unit (GCM)
44,000 kg
Weight approx.
260 kg
(with fifth wheel)
D-value
120 kN
Type approval number
e1 00-1069
CRN
26983
The above loads apply to operation on ordinary roads and ordinary operating conditions as
they are to be found in Europe. If the fifth wheels are being operated in other territories or
under other conditions we would ask you to contact us regarding the type of fifth wheel to
be used.
8/08

126
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts DH
Dual height
fifth wheel system
Fig.
Description
Part No
Fig.
Description
Part No
1
2
3
4
5
6
7
8
9
10
11
Fifth wheel coupling

Fifth wheel coupling bearing, compl.
Split pin, complete
Lever
Closing cylinder
Spacer bushing, complete
Lever
Pivot pin
Bushing set 1
Bolt complete
JSK 37 E/00128cm
12
13
14
15
16
17
18
19
20
21
Latch, complete
Spring
Bushing set 2
Wedge right, complete
Wedge left, complete
Locking pin, right
Elbow lever
Locking pin, left
Cylinder, complete
Bushing set 3
DH
DH
DH
DH
DH
DH
DH
DH
DH
DH
DH 1019902
DH 1019903
DHE 1011600
SK 2405-23
DHE 1011100
DH 1019907
DH 1019908
DH 1019909
DH 1019910
DHE 1003100
1019912
1019913
1019914
1019915
1019916
1019917
1019918
1019919
1019920
1019921
8/08

127
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Ballrace Slider
fifth wheel system
Ballrace Slider
Over 100kgs lighter than other available

products.
Base Assembly - EVPLP Slider LT
735mm of travel.
Fifth Wheel - JSK 37 CZ 150 (Refer to page 35)
Total overall height including the fifth wheel of

307mm.
Total length of 2060mm.
Weight: 435kgs
Pneumatically operated.
CRNs 24836 and 26170 apply.
Supplied as standard with the proven tried and
tested JSK 37 CZ Fifth Wheel - The Industry
Standard.
Manufactured using only genuine Jost
components.
Vertical loading of 20,000kgs.
Will suit all North American and European
chassis widths and A-trailers.
8/08

128
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
129
King Pins
130
Jost King Pins

Technical Circular
Jost King Pins - Bolt Torque
Until recently precise torque wrenches were not commonly available in workshops
and garages. Because of this JOST prescribed onlt torque settings which could not
damage the bolts.
The existing torque settings have proved themselves on the test bench (e.g. MOT)
and in many years of daily usage, subject to our installation and maintenance
instructions being adhered to.
Nowadays the trailer manufacturers and workshops are using more precise torque
wrenches, which are regularly calibrated. This is the prerequisite for a higher torque
setting, without the danger of the bolt being damaged. The increase in torque will
result in an optimum initial stressing force of the bolt.
The new torque setting will enable the maintenance period to be increased to max.
50,000km resp. six months in line with that of the fifth wheel. The conditions of
usage and the instructions of the trailer builders must however be observed.
New JOST torque settings:
Bolt
Part no.
Size
Torque
Nm
King pin type
KZE 1012-03
M14 x 35
190 10
KZ 1008-1012
KZ 1410, KZ 1412
KZE 0912-03
M14 x 34
190 10
KZ 0906 - KZ 0912
KZ 1712
KZE 1416-03
M16 x 45
280 15
KZ 1416, KZ 2816
KZE 1016-06
M20 x 50
500 30
KZ 1016, KZ 1516
8/08

131
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pins 2
Access from underneath
KZ 1008 - KZ 1012
D-value 190 kN
Components
Skid plate
thickness
A
Type
Thickness
B
8 mm
10 mm
12 mm
KZ 1008
KZ 1010
KZ 1012
37mm
34mm
33mm
KZ 1008-02
KZ 1010-02
KZ 1012-02
Retention
King pin
plate
KZ 1008-02
KZ 1010-02 KZ 1012-01
KZ 1012-02
Welding seam
thickness
a
CRN
6 mm
7 mm
7 mm
24156
24156
24156
B.Double &
Road train Rated
Dimensions according
DIN 74080 and ISO 337
to
JOST king pins can be

used in self steering axle
systems.
Mounting must be carried out
according to the instructions.
31/2 & 2 king pins are easily
interchangeable

8/08

132
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts for

KZ1008 - KZ 1012
Fig.
1a
2
Description
Part No.
King pin 2Dia
KZ 1012-01
Retention plate for:

12 mm skid plate
10 mm skid plate
8 mm skid plate
KZ 1012-02
KZ 1010-02
KZ 1008-02
Self-securing bolt
KZE 1012-03
8/08

133
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pins 2
Type KZ 0908
For single trailer use only
Type
Colour
King pin
CRN
KZ 0908
white
KZ 0912-01
24857
Dimensions according to DIN 74080 and ISO 337

JOST king pins can be used in self steering axle systems.
Mounting must be carried out according to the instructions.
8/08

134
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts for

KZ 0908
Fig.
Description
Part No.
King pin
KZ 0912-01
Retention plate
8 mm skid plate
KZ 0908-04
Bolt
KZE 0912-03
Spring washer C 14,5
KZE 0912-05
Nut B 14
KZE 0912-06
8/08

135
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pin 2
Type KZ 1516
D-value 162.4 kN
Skid plate
thickness
A
16mm
Components
Type
Retention
plate
King pin
CRN
KZ 1516
KZ 1016-02
KZ 1516-01
24344
to DIN 74080 and ISO 337
JOST king pins can be used
in self steering axle systems.
according to our instructions.
31/2 and 2 king pins are easily interchangeable.

8/08

136
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts for

KZ 1516
Fig.
Description
Part No.
1
2
3
2/3
King pin
Retention plate
Self-securing bolt
Retention plate compl. with bolts
KZ
KZ
KZE
KZ
1516-01
1016-02
1016-06
1016-04
8/08

137
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pin 31/2

Type KZ 1706-1712
Skid plate
thickness
A
8 mm
Components
King pin
Type
Retention
plate
KZ 1708
KZ 0908-04
KZ 1712/01
Welding
seam
thickness
A
Type
approval
number
NL
CRN
6 mm
RDW
17010221
24856
Dimension according to DIN 74083 and ISO 4086

8/08

138
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts for

KZ 1706 - KZ 1712
Description
Part No.
King pin
Retention plate compl.
with bolts, nuts and
spring washers for:
12 mm skid plate
10 mm skid plate
8 mm skid plate
7 mm skid plate
6 mm skid plate
Bolt
Spring washer C 14,5
Nut B 14
KZ 1712-01
Fig.
1
2
2
2
2
2
2
3
4
5
KZ 0912-04
KZ 0910-04
KZ 0908-04
KZ 0907-04
KZ 0906-04
KZE 0912-03
KZE 0912-05
KZE 0912-06
8/08

139
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pin 31/2

Type KZ 1016
D-value 280 kN
Skid plate
thickness
A
16mm
Components
Type
Retention
plate
King pin
CRN
KZ 1016
KZ 1016-02
KZ 1016-01
24292

8/08

140
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts for

KZ 1016
Fig.
Description
Part No.
1
2
3
2/3
King pin
Retention plate
Self-securing bolt
KZ
KZ
KZE
KZ
1016-01
1016-02
1016-06
1016-04
8/08

141
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pin 31/2

Type KZ 1408
Type KZ 1410
Type KZ 1412
D-value 163 kN
Components
Skid plate
thickness
A
Type
8mm
10mm
12mm
KZ 1408
KZ 1410
KZ 1412
Colour
Retention
plate
King pin
CRN
White
blue
yellow
KZ 1008-02
KZ 1010-02
KZ 1012-02
KZ 1412-01
KZ 1412-01
KZ 1412-01
24811
24811
24811
KZ 1008-04
KZ 1010-04
KZ 1012-04

8/08

142
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts for

KZ 1408, KZ 1410, KZ 1412
Fig.
1
2
2
2
3
2+3
Description
King pin
Retention plate
for 8 mm skid plate
Retention plate
for 10 mm skid plate
Retention plate
for 12 mm skid plate
Self-securing bolt
Part No.
KZ
1412-01
KZ
1008-02
KZ
1010-02
KZ 1012-02
KZE 1012-03
8/08

143
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pin 31/2

Type KZ 1416
D-value 200 kN
Skid plate
thickness
A
16mm
Components
Type
Retention
plate
King pin
CRN
KZ 1416
KZ 1416-02
KZ 1416-01
24812

8/08

144
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts for

KZ 1416
Fig.
Description
Part No.
1
2
3
2/3
King pin
Retention plate
Self-securing bolt
KZ
KZ
KZE
KZ
1416-01
1416-02
1416-06
1416-04
8/08

145
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pin 2
Type KZ 2816
D-value 162.4 kN
Components
Skid plate
thickness
A
Type
Retention
plate
King pin
16mm
KZ 2816
KZ 1416-02
KZ 2816-01

8/08

146
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts for

KZ 2816
Fig.
Description
Part No.
1
2
3
2/3
King pin
Retention plate
Self-securing bolt
KZ
KZ
KZE
KZ
2816-01
1416-02
1416-06
1416-04
8/08

147
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pin 31/2
Type KZ 1116
e
l
b
a
il
a
v
A
r
e
g
n
o
L
o
Type approval
number
Components
Skid plate
thickness
A
Type
Flange
King pin
compl.
16mm
KZ 1116
KZ 1116-02
KZ 1116-06
NL
CRN
F 3194
RDW
1701 0251
24511
Dimensions according to DIN 74083 and ISO 4086

8/08

148
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts for

KZ 1116
Fig.
Description
Part No.
1
2
3
4
5
1/3/4/5
King pin
flange
Disc
Castellated nut
Split pin
King pin complete with
castlellated nut, disc and split pin
KZ
KZE
KZE
KZE
KZ
KZ
1116-01
1116-02
1116-03
1116-04
1116-05
1116-06
8/08

149
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting Proposals
for King Pins
8/08

150
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting and Operating

Instructions for King Pins
King pins are safety parts connecting the articulated unit and are (in certain countries) subject to type approval. It is
essential that only original JOST spare parts are used. Any alterations invalidate the guarantee and the type approval.
Parts which have been damaged or repaired (e.g. by welding) may not be used. When installing the king pins the relevant
registration instructions must be adhered to, e.g. in Germany 19, 20 and 21 of the St VZO (road traffic regulations).
The maximum D-value and the model number (e.g. series KZ10) can be found in the relevant data sheets resp. on the tip
of the king pin itself.
The load data are valid for operation on paved roads and under conditions prevailing in central Europe. For alternative
conditions please consult us.
The D-value can be calculated according to DIN standards 74080 and 74083 by means of the following formula:
T = maximum permissible total weight or tractor [t].
(including
U)
0.6 x T x R
[kN] R = maximum permissible total weight of semi-trailer {t}
D+gx
T+R-U
U = maximum permissible imposed load [t].
g = 9.81 m/s2
The model number of the king pin is made up as follows:
e.g.: KZ10
12
Thickness of retention plate, in this case 12mm

Model (series), in this case KZ10
JOST king pins are manufactured in accordance with the valid international standards, which stipulate amongst other
requirements the length of the protruding king pin from the underside of the skid plate. Before the king pin is mounted
onto the skid plate, please check both flatness and thickness of the skid plate. The tolerance in the flatness of the part of
the skid plate in contact with the fifth wheel must not exceed 2mm. Sharp edges and protruding welding seams are not
allowed. The skid plate must cover the supporting surface of the fifth wheel in every position.
Skid plate thickness tolerances in mm, except for model nos. Z1106 to KZ1112 and KZ1116:
+0.6
+0.6
+0.4
+0.4
+0.2
+0.3
6mm
7mm
8mm
10mm
12mm
16mm
-0.1
-0.1
-0.3
-0.3
-0.5
-0.5
Skid plate thickness tolerances in mm for model nos. KZ1106 to KZ1112 and KZ1116:
+0
6mm
up to
16mm
-0.3
When welding the retention plate resp. the tapered sleeve the following welding processes and filler materials are acceptable:
Welding process: EII
Welding process: MAG C or MAG M
Filler material:
optional Filler material:
E 4320 min. A5 DIN1913
Griduct S-V5 green resp. S-V4 red (Messer Grieshelm)
Union K52 resp. Union 56 (Thyssen Draht AG)
or E MK 7 resp. E MK 6 (Bohler)
or an alternative welding process and filler material approved by the Road Transport authorities.
The skid plate must be adequately reinforced according to the load.
The method and dimensions of the reinforcement are the responsibility of the trailer builder. In order to achieve sufficient
stability we recommend a skid plate thickness of 12mm for 2 king pins and 16mm for 3` king pins (recommended
material St 52-3).
The king pins must be installed centrally and at right angles. Tapered king pins must be hammered into place after cleaning
the joining area, the castellated nut must then be tightened to the prescribed torque and secured by means of a split pin.
The bolted in king pins must be protected from welding spatter. After welding please check the bolts and (if
applicable) nuts for correct torque. The contact and functioning surfaces must be protected before painting.
The king pins and their supports must be checked for wear, damage and cracks according to usage, but at
the latest every six months, and replaced if necessary. The bolts and nuts must be checked for the correct torque.
Before being put into service the king pin, skid plate and locking mechanism of the fifth wheel coupling must be
thoroughly lubricated with high pressure (EP) grease with MoS2 or graphite additive (e.g. BP L21 M, BP HTEP 1, Esso
universal grease M or Shell Retinax AM). The life span of the king pin and the fifth wheel coupling depend to a large
extent on their adequate lubrication.
The king pin and the locking mechanism of the fifth wheel are subject to natural wear during operation. Once the limits of
wear are reached, the king pins must be replaced by original JOST parts.
8/08

151
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
King Pin Lock

King Pin lock for 2 King Pins
DS 2000
Low weight, handy,safe. For all 2 king pins. Completely protects not only the 2
neck, but all mounting bolts. Corrosion-resistant.
Cylinder lock of high quality, dust and water proof. Locking with normal or
master keys possible.
8/08

152
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare Parts
King Pin lock for 2 King Pins
DS 2000
Fig,
1
2
Description
King pin lock, complete
cylinder lock with 2 keys
Part No.
DS 2000
DS 1000-03
When re-ording keys or cylinder locks for locking systems having same keys, please state
code number.
8/08

153
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Wear Limit Gauge

King Pin Gauge
Above item is designed as a NO GO wear limit indicator, for either 50mm or

90mm king pins.
Once king pin can pass through gauge the king pin must be replaced.
Also designed to check king pin protrusion.
8/08

154
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
155
Telescopic
landing gear
156
Modul
Flexibility due to a
modular ordering system
The ordering system allows clients to choose and
put together a set of legs to suit their needs.
Installation height
max. lift
520mm
470mm
400mm
02 = 850mm
03 = 800mm
05 = 700mm
Foot versions
00 = without foot
fitted
01 = S Foot
02 = A Foot
03 = R Foot
04 = T Foot
06 = Low Profile T
compensating foot
rocking foot
wheels
sand shoe
Part No.
JS D01
JS D02
JS D03
JS D04
JS D06
Crank handle with parking hook

03 = 450mm
05 = 520mm
Optional
Standard
Connection Shaft
10 = 1790mm
Standard
8/08

157
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Modul
Landing gear
Reference
M02
M03
M05
Mh
850
800
700
Crank handle
Lift
520
470
400
A
580
530
430
Reference
JS U03
JS U05*
B
450
520
C
634
704
D
658
728
Connection shafts
Reference
JS L10*
Technical data (per set)

Modul B
Lifting capacity
Static load
Lift per turn of handle
- low gear
- high gear
Crank force at 16t super imposed load
24t
50t
35t with wheels
0.9mm
15.0mm
210N
Subject to change in dimensions and design

*No brace lugs are supplied for the combinations of
installation height 04, 05, 06, 24 and back plate 02,
03. For loose brace lugs see accessories.
E
1790
F
1815
* Standard with set of legs.
Foot versions
00 = without foot
fitted
JSD01 = S Foot
JSD02 = A Foot
JSD03 = R Foot
JSD04 = T Foot
JSD06 = LP T
compensating foot
rocking foot
wheels
sand shoe
low profile T foot
8/08

158
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

Modul
Fig.
Description
Part No.
1
2
3
4
Cover, left with bolts

Cover, right with bolts
See individual components
Bevel gear with bolt
JS 0046100
JS 0046300
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Shaft
Bearing, complete
Bearing
Shaft with bearing
Grease tank
Gear wheel
Crankshaft, complete
Bearing holder, complete
Crankshaft and bearing holder, compl. 12 +11
Drive, complete 8, 10 + 13
Bolt with washers and nuts
See individual components
Crank bushing
Crank parking hook for crank 415-480mm
Crank parking hook for crank 520mm
*Mh-02/850 shaft left
Axial bearing with washer
19
21
JS 0058600
Supercedes
JS0046000
JS 0001500
JS 0046200
JS 0001800
JS 0058700
JS 0002000
JS 0055800
JS 0046500
JS 0058800
JS 0056600
JS 0083700
JS 0043100
JS 0042700
JS 0040201
JS 0040202
JS E0031801
JS E0031802
JS E0031804
JS E0066401
Fig.
21
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Description
Part No.

Axial bearing with washer
Nut and bolt
Bolt
Spring
S foot, complete
A foot, complete
T foot, complete
Tc foot, complete *
R foot, complete *
Wheels with split pins
Wheel holder
Clamp with angle
Angle
Clamp
Nut and bolt
Drive repair kit
JS E0031804
JS E0066401
JS 0043300
JS 0055300
JS 0012900
JS D01
JS D02
JS D04
JS D06
JS D03
JS 0062200
JS E0067300
JS E010.010
JS E010.001
JS E010.002
JS E020.004
JS E0059200
Individual Components, Accessories and Repair Kits

3
16
Connection shaft 1790mm

Crank 450mm with parking hook
Crank 520mm with parking hook
JS L10
JS U03
JS U05
* With the 06/TC foot version, item 30, the installation height Mh is reduced by 50mm
* With the 06/TC foot version, item 30, the installation height Mh is reduced by 50mm
8/08

159
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Modul Series Landing Legs

Modul Series Landing Legs
Available in 400mm, 470mm, 520mm Travel
Standard outside flange mounting models
9 Diameter Standard Wheels
Modul R 400mm
Modul R 470mm
Modul R 520mm
329mm 230mm Sand Shoes (T Feet)

Modul T 400mm
Modul T 470mm
Modul T 520mm
Air Suspension Feet (280mm 240mm)

Modul A 400mm
Modul A 470mm
Modul A 520mm
Compensating Feet (397mm 260mm)

Modul S 400mm
Modul S 470mm
Modul S 520mm
Supplied without Feet can take R.T.S or A Feet

Modul WF 400mm
Modul WF 470mm
Modul WF 520mm
Note: Inside flange mounting models also available

8/08

160
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Landing Legs
A400 Series
Load Capacities per pair

Lifting Capacity . . . . . . . . . . 25 tons
at 100 ft. lbs. input torque
Landing Gear Dimensions
Static Load Capacity. . . . . . 80 tons

Side Load Capacity. . . . . . 14.5 tons
Outside Mount
Travel Option Dimensions

Model
A400/A/G/T/R
A400/A/G/T/R
A400/A/G/T/R
A400G3-17
D - Travel
14 (355.6mm)
17 (431.8mm)
19 (482.6mm)
17 (431.8mm)
A - Extended
5
42 8 (1082.675mm)
48 58 (1235.075mm)
52 58 (1366.675mm)
5
45 8 (1158.875mm)
B - Retracted
5
28 8 (727.075mm)
31 58 (803.275mm)
33 58 (854.075mm)
5
28 8 (727.075mm)
8/08

161
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Landing Legs
A400 Series
INDIVIDUAL COMPONENTS
Item
6
Description
Qty.
Standard Crank w/Hardware 17 3/4
7
Crank Hanger
1
10
Brace Lug - W
2
11
Intermediate Cross Shaft
1
12
Cover Screw
4
13
Cover - 2 Speed
1
14
Cover - 1 Speed
1
15
Pinion Gear
1
16
Bevel Gear
2
17
Pinion Shaft - 1 Speed
1
18
Thrust Washer
2
19
Grooved Pin
2
20
Spacer Washer
2
21
Grease Fitting
4
22
Grease Seal
1
24
Self Locking Nut
4
25
Cross Shaft Bolt - 3/8 x 2 Gr5
2
26
Thrust Bearing
2
27
Collar
2
28
Output Shaft
1
30
Bushing
2
33
Roll Pin - 3/8 x 1 1/2
1
34
Spiral Pin
2
*Not Available as single item, included in part number 43
Part No.
C10592.4 &
C10592.4-R
B10261
C10108
B10066
A10059.1
C10217
C10259
C10177
C10155
B10130
A10102
A10052.3
A10218
A10040
A10283
A10038.7
A10037.1
A10033
A10101
A10212
A10255
A10054.3
A10260.1
Item
35
36
37
38
39
40
41
42
43
44
45
46a
46b
47
48
49
50
51
52
53
54
55
Description
Roll Pin - 3/8 x 1 3/4
Output Cluster Shaft
Output Cluster Gear
Input Gear Shaft
Output Spur Gear
Input Spur Gear
Detent Spring
Detent Ball
Shift Housing incl.31,32
Shift Housing incl.41,42
Shift Housing Bolt
Self Locking Nut
Shoe - 10 x 10 x 4 1/2 Standard
Low Profile T Foot
Shoe Axle
Hex Head Bolt
Roll Pin - 1/4 x 1/4
9 Dia Standard Wheel
Wheel Axle
Air Suspension foot (pressed type) c/w axle
Axle for pressed air foot
Compensating foot c/w axle
Axle for compl. foot
3
4
Part No.
14 Travel 17 Travel 19 Travel
Inner Leg Assy. - Standard

C10140.1
Inner Leg Assy. - 10 Cushion C10146.1
C10140.2
C10146.2
Part No.
1
1
1
1
1
1
1
2
1
1
4
4
2
2
2
2
1
4
2
2
2
2
2
A10054.7
B10236
C10234
C10233
C10078
C10085
A10049
A10048
B10229*
B10229-S
A10230
A10038.6
C10035
C10135
B10036
A10037.3
A10054.6
C10342
B10300
JS1116-0340C
B10036.1
JS1116-358CN
B10036.1
FOOTWEAR OPTIONS
COMPONENT ASSEMBLIES
Item Description
Qty.
C10140.3
C10146.3
Description
10 x 10 Cushion Foot
9 Dia. Standard Wheels
Air Suspension
Order
Code Description
G
R
S
Order
Code
Compensating foot
10 x 10 x 4 1/2 Sand Shoes
Low Profile T
C
T
T1
8/08

162
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
163
Cranks for telescopic landing gear for E 200 Series
JS 1118-03
short model
JS 1118-17
standard model
e
l
b
a
il
Three
hree crank extensions are available:
Types
ypes JS 1 (aluminium) and JS 4 (steel) for screwing onto the gearbox
Type
ype JS 2 for welding onto the vehicle chassis
footwear
ootwear options
Rubber cushioned foot = G
a
v
A
r
sand shoe = T
swivels up to 15 in all directions
wheels = R
e
g
n
o
L
o
Rocking foot - A
Compensation Foot = S
The main
advantages:
Considerably improved
stability against
deformation.
Reinforced springs,
improved suspension
Cast sand shoe for

exceptional stability
Particulary robust,
even under very adverse
conditions.
Reduction of noise.
Weight reduction of
approx. 4 kg per set.
Simplified mainenance
(exchange of parts).
8/08

164
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Technical
Information
Spindle and Lubrication
Reinforced welded ring at the end of travel

increased safety margin to avoid over cranking
Improved lubrication of the low maintenance version

only one grease nipple left
Long life grease filling permanently encased around the spindle

on the maintenance free version
no more grease nipples at all
8/08

165
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Telescopic landing gear

Standard
Series E 200 One side operation

Series E 240 Two side operation
Type E 200 G shown below, can alternatively be supplied with wheels R or sand shoes T
e
l
b
a
il
e
g
n
o
L
o
a
v
A
r
Technical data
E 200
Lifting capacity
24 t
Static load
50 t
Weight
~ 90 kg
Lift per one turn of handle
Low gear
1.0 mm
High gear
10.6 mm
Crank force per handle
at 12t super imposed load
17 kg
23 kg
29 kg
35 kg
dimensions can be
* These
altered by the addition of
a crank extension. Plea
Please
refer to our leaflet on
crank extension.
E 240
24 t
50 t
~ 101 kg
Normal equipment:
E 200
E 240
1
1
1
1
1
1
1
2
1
2
jack with drive

jack without drive
crank handle
connection shaft
crank parking hook
jack with drive right hand

jack with drive left hand
crank handles
connection shaft
crank parking hooks
1.0 mm
10.6 mm
9 kg
12 kg
15 kg
18 kg
We reserve the right to alter specifications without notice
8/08

166
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

telescopic landing gear type E 200 +
E 240
The series number is
the 3rd to 5th digit of the
number on the type plate.
Fig.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
33
Description
Housing R.H.
Housing L.H.
Housing L.H. (type E 240)
Supporting tube
Supporting tube
Wheels
Sand shoe
Axle for wheels
Axle for sand shoe compl.
Spindle R.H. compl.
Spindle L.H. compl.
Thrust bearing
Large gear set with clamping sleeves 36
Rubber cushioned foot compl.
Gear drive pinion with ball and
pressure spring
Large bevel gear with clamping
sleeves 37
Small bevel gear with clamping
sleeves 36
Bush
Distance piece
Bush
Cover plate
Drive shaft
Drive shaft
Connection shaft
Gearbox cover
Bush
Bush
Crank handle
Crank holder
Part No.
Fig.
Description
Part No.
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
35
36
37
38
39
40
41
42
43
48
Pin
Clamping sleeves
Clamping sleeves
Plug
Grease nipple
Pressure spring with balls
Bolt
Bolt with washers and nut
Bolt with nut
Cover plate
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
1111-01*
1111-55*
1211-01*
1112-01*
1112-05*
1116-01
1116-06
1118-01
1118-02
1114-01*
1114-14*
1101-18
1118-05
1116-31
REPAIR KITS
6+8
Pair of wheels compl. with axle
JS 5
7+9
Sand shoe compl. with axle

Leg complete R.H. with drive for
type E 200
Leg complete L.H. without
drive for type E 200
Leg complete L.H. with drive
for type E 240
Leg complete R.H. with drive
for type E 240
JS 10
JS 1118-06
JS 1118-14
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
1118-15
1101-02
1101-07
1101-09
1101-03
1114-04
1114-16
1110-01
7111-0001
1101-08
1101-10
1118-03
1101-17
1120-07
1118-08
1118-09
1101-12
1120-06
1118-04
1120-21
1118-10
1118-11
1101-38
ER 200*
EL 200*
ER 240*
EL 240*
18, 26,
36, 37,
38, 41
Repair kit for land gear

without drive
JS 1118-104
18, 19,
20, 26,
27, 36,
37, 38,
40, 41,
42
Repair kit for landing gear

with drive
JS 1118-103
* Important when ordering these parts

please state overall height of landing gear (900, 950 or 1000 mm)

167
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Telescopic landing gears
Series E 200-500
One side operation
Type E 200 G 500 .shown below, can alternatively be supplied with wheels R and sand shoes T
e
l
b
a
il
a
v
rA
e
g
o
N
n
o
L
Technical data
Lifting capacity
Static load
Weight
Low gear
High gear
Retracted Height
E 200-500
25 t
50t
81 kg
Normal equipment:
E 200-500
1 jack with drive
1 jack without drive
1.0 mm
10.6 mm
1 crank handle
17 kg
23 kg
29 kg
35 kg
850mm
1 crank parking
1 connection shaft
hook

168
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

telescopic landing gears type E 2000- 500
Fig.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
33
Description
Housing R.H.
Housing L.H.
Housing L.H. (type E240)
Supporting tube
Supporting tube
Wheels
Sand shoe
Axle for Wheels
Spindle R.H. compl
Spindle L.H. compl.
Thrust bearing
Gear drive pinion with ball and pressure
spring
sleeves 37
sleeves 36
Bush
Bush
Bush
Cover plate
Drive shaft
Drive shaft
Connection shaft
Gearbox cover
Bush
Bush
Crank handle
Crank holder
Part No.
Fig.
Description
Part No.
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
35
36
37
38
39
40
41
42
43
48
Pin
Clamping sleeves
Clamping sleeves
Plug
Grease nipple
Bolt
Bolt with nut
Cover plate
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
1111-01
1111-55
1211-01
1112-01
1112-21
1116-01
1116-06
1118-01
1118-02
1114-01
1114-14
1101-160
1118-05
1116-31
REPAIR KITS
6+8
JS 5
7+9

type E 200 - 05000
drive for type E 200 - 05000
JS 10
EL 200-500
18,26
36,37
38,41

without drive
JS 1118-104
18,19
20,26
27,36
37,38
40,41
42

without drive
JS 1118-103
JS 1118-06
JS 1118-14
JS 1118-15
JS 1101-02
JS 1101-07
JS 1101-09
JS 1101-03
JS 1114-04
JS 1114-16
JS 1110-01
JS 7111-0001
JS 1101-08
JS 1101-10
JS 1118-17
JS 1101-17
1120-07
1118-08
1118-09
1101-12
1120-06
1118-04
1120-21
1118-10
1120-73
1101-38
ER 200-500
8/08

169
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Telescopic landing gears
Series E 200-1900
One side operation
Type E 200 G 1900 shown below, can alternatively be supplied with wheels R and sand shoes T
e
l
b
a
il
a
v
A
r
e
g
n
o
L
o
Technical data
Lifting capacity
Static load
Weight
Low gear
High gear
Retracted Height
E 200-1900
25 t
50t
72kg
Normal equipment:
E 200-1900
1 jack with drive
1 jack without drive
1.0 mm
10.6 mm
1 crank handle
17 kg
23 kg
29 kg
35kg
750mm
1 crank parking
1 connection shaft
hook

8/08

170
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

telescopic landing gears type E 200 - 1900
Fig.
Description
Part No.
Fig.
Description
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Housing R.H.
Housing L.H.
Housing L.H. (type E240)
Supporting tube
Supporting tube
Wheels
Sand shoe
Axle for Wheels
Spindle R.H. compl
Spindle L.H. compl.
Thrust bearing
spring
sleeves 37
sleeves 36
Bush
Bush
Bush
Cover plate
Drive shaft
Drive shaft
Connection shaft
Gearbox cover
Bush
Bush
Crank handle
Crank holder
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
35
36
37
38
39
40
41
42
43
48
Pin
Clamping sleeves
Clamping sleeves
Plug
Grease nipple
Bolt
Bolt with nut
Cover plate
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
16
17
18
19
20
21
22
23
24
25
26
27
28
33
1111-118
1111-119
1111-157
1112-01
1112-45
1116-01
1116-06
1118-01
1118-02
3114-01
3114-03
1101-160
1118-05
1116-31
REPAIR KITS
6+8
JS 5
7+9

type E 200 - 19000
drive for type E 200 - 19000
JS 10
EL 200-1900
18,26
36,37
38,41

without drive
JS 1118-104
18,19
20,26
27,36
37,38
40,41
42

without drive
JS 1118-103
JS 1118-06
JS 1118-14
JS 1118-15
JS 1101-02
JS 1101-07
JS 1101-09
JS 1101-03
JS 1114-04
JS 1114-16
JS 1110-01
JS 7111-0001
JS 1101-08
JS 1101-10
JS 1118-17
JS 1101-17
1120-07
1118-08
1118-09
1101-12
1120-06
1118-04
1120-21
1118-10
1120-73
1101-38
ER 200-1900
8/08

171
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

for trailers with air suspension
Series E 200 S One side operation

Series E 240 S Two side operation
This landing leg has been developed specifically for semi-trailers with air suspension.
When these trailers stand for some time the chassis can sink due to loss of pressure in the
suspension air bags. This results in a bending moment on the landing gear which can lead to
damage.
The special construction of the foot in conjunction with a reinforced inner leg can compensate
for up to 125 mm horizontal movement of the chassis in either direction.
e
l
b
a
il
a
v
A
r
e
g
n
o
L
o
* These dimensions ca
can be
altered by the addition of a
crank extension. Please
Pl
refer to our leaflet on crank
extensions.
* Specially stiffened design
with heavy-duty inner leg.
Normal equipment:
Technical data
Lifting capacity
Static load
Weight
Low gear
High gear
E 200 S
24 t
50 t
~101 kg
E 240 S
24 t
50 t
~ 112 kg
1.0 mm
10.6 mm
1.0 mm
10.6 mm
17
23
29
35
9 kg
12 kg
15 kg
18 kg
kg
kg
kg
kg
E 200 S
E 240 S
1
1
1
1
1
1
1
2
1
2
jack with drive

jack without drive
crank handle
connection shaft
crank parking hook

crank handles
connection shaft
crank parking hooks

172
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

telescopic landing gear
type E 200 S + E 240 S
The series number is the 3rd to 5th
digit of the
number on the plate
Fig.
Description
Part No.
Fig.
Description
Part No.
1
2
3
4
6
7
8
9
10
11
12
13
15
Housing R.H.
Housing L.H.
Housing L.H. (Type E 240)
Supporting tube
Rod with retaining rings
Rocking foot compl.
Sand shoe compl.
Spindle R.H. compl.
Spindle L.H. compl.
Thrust bearing
pressure spring 40
Large bevel gear with
clamping sleeves 37
Small bevel gear with
clamping sleeves 36
Bush
Distance piece
Bush
Cover plate
Drive shaft
Drive shaft
Connection shaft
Gear box cover
Bush
Bush
Crank handle with sleeve 32
Spring
Crank parking hook
Pin
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
36
37
38
39
40
41
42
43
48
Clamping sleeves
Clamping sleeves
Plug
Grease nipple
Bolt
Bolt with nut
Cover plate
ASSEMBLIES
Rocking foot compl. with axle
JS
JS
JS
JS
JS
JS
JS
JS
JS
16
17
18
19
20
21
22
23
24
25
26
27
28
29
33
35
1111-150*
1111-151*
1211-28*
1112-90*
1118-138
1116-138
1118-139
1116-144
1114-01*
1114-14*
1101-18
1118-05
JS 1118-06
JS 1118-14
JS 1118-15
JS 1101--2
JS 1101-07
JS 1101-09
JS 1101-03
JS 1114-04
JS 1114-16
JS 1110-01
JS 7111-0001
JS 1101-08
JS 1101-10
JS 1118-03
JS 1116-149
JS 1101-17
JS 1120-07
7,8
6,9,
1118-08
1118-09
1101-12
1120-06
1118-04
1120-21
1118-10
1118-11
1101-38
JS 12
29
Sand shoe compl., with rod and spring
JS 12 +
JS 13
JS 13 S-foot complete
JS 17
4+
6, 7, 8, 9 not sold seperately
JS 14 S-foot compl. with supporting tube
JS 15
Leg compl. R.H. with drive

for type E 200 S
ER 200 S*
Leg compl. L.H. without drive

for type E 200 S
EL 200 S*
Leg compl. R.H. with drive

for type E 240 S
ER 240 S*
Leg compl. L.H. with drive

for type E 240 S
EL 240 S*
8/08

173
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

for trailers with air suspension
Series E 200 A One side operation

Series E 240 A Two side operation
This landing gear has been developed specifically for semi-trailers with air suspension.
suspension air bags. This results in a bending moment on the landing gear which can lead
to damage.
The special rocking foot in conjunction with a reinforced inner leg can compensate for up to
130 mm horizontal movement of the chassis. Correct functioning is only possible when the
trailer is standing on a hard, level surface, which will allow the rocking foot to operate.
Existing JOST standard legs can be retrospectively modified with the assembly JS 9 (rocking
foot with axle and reinforced inner leg).
e
l
b
a
il
e
g
n
o
L
o
a
v
A
r
Technical data
E 200 A
Lifting capacity
24 t
Static load
50 t
Weight
~ 91 kg
Low gear
1.0 mm
High gear
10.6 mm
17 kg
23 kg
29 kg
35 kg
dimensions can be
* These
a crank extension. Please
crank extension.
Specially stiffened design
with heavy-duty inner leg.
E 240 A
24 t
50 t
~ 102 kg
1.0 mm
10.6 mm
Normal equipment:
E 200 A
E 240 A
1
1
1
1
1
1
1
2
1
2
jack with drive

jack without drive
crank handle
connection shaft
crank parking hook

crank handles
connection shaft
crank parking hooks
9 kg
12 kg
15 kg
18 kg

Particular attention should be paid to our leaflet on mounting instructions.

174
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

telescopic landing gears
type E 200 A + E 240 A
Fig.
1
2
3
4
7
9
10
11
12
13
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Description
Housing R.H.
Housing L.H.
Housing L.H. (type E 240)
Supporting tube
Rocking foot
Spindle R.H. compl.
Spindle L.H. compl.
Thrust bearing
spring 40
Large bevel gear with clamping sleeves 37
Small bevel gear with clamping sleeves 36
Bush
Distance piece
Bush
Cover plate
Drive shaft
Drive shaft
Connection shaft
Gearbox cover
Bush
Bush
Crank handle with sleeve 29
Part No.
Fig.
Description
Part No.
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
1111-01*
1111-55*
1211-01*
1112-66*
1116-72
1118-02
1114-01*
1114-01*
1101-18*
1118-05
33
35
36
37
38
39
40
41
42
43
48
Crank parking hook

Pin
Clamping sleeves
Clamping sleeves
Plug
Grease nipple
Bolt
Bolt with nut
Cover plate
ASSEMBLIES
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
1118-06
1118-14
1118-15
1101-02
1101-07
1101-09
1101-03
1114-04
1114-16
1110-01
7111-0001
1101-08
1101-10
1118-03
8+9
JS 8
4,8
9

and reinforced inner leg
JS 9

type E 200
Leg complete L.H. without drive for
type E 200
type E 240
Leg complete L.H. with drive for
type E 240
1101-17
1120-07
1118-08
1118-09
1101-12
1120-06
1118-04
1120-21
1118-10
1118-11
1101-38
ER 200 *
EL 200 *
ER 240 *
EL 240 *

8/08

175
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Telescopic landing gear for trailers

with air suspension Aluminium
Series E 100 A One side operation
This landing gear has been developed specifically for semi-trailers with air suspension.
suspension air bags. This results in a bending moment on the landing gear which can lead
to damage.
The special rocking foot in conjunction with a reinforced inner leg can compensate for up to
130 mm horizontal movement of the chassis. Correct functioning is only possible when the
trailer is standing on a hard, level surface, which will allow the rocking foot to operate.
These dimensions can be

a crank extension. Please
crank extension.
The weight has been reduced by approx.

30 kg, whilst maintaining the same stability
and technical data. In order to prevent
corrosion we recommend avoiding any
direct contact with steel parts by means of
sufficient insulation.
Technical data
E 100
Lifting capacity
24 t
Static load
50 t
Weight
~ 61 kg
Low gear
1.0 mm
High gear
10.6 mm
17 kg
23 kg
29 kg
35 kg
E 140
24 t
50 t
~ 68 kg
1.0 mm
10.6 mm
Normal equipment:
E 100 A
E 140 A
1
1
1
1
1
1
1
2
1
2
jack with drive

jack without drive
crank handle
connection shaft
crank parking hook

crank handles
connection shaft
crank parking hooks
Inset to prevent corrosion between back plate

resp. brace ear and vehicle chassis JS 2118-03.
9 kg
12 kg
15 kg
18 kg

176
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

telescopic landing gears
type E 100 A + E 140 A
The series number is
the 3rd to 5th digit of the
number on the type plate.
Fig.
Description
Part No.
Fig.
Description
Part No.
1
2
4
7
8
9
10
11
12
13
Housing R.H. and L.H. (type E140)

Housing
Supporting tube
Rocking foot
Axle for rocking foot compl.
Rocking foot compl.
Spindle R.H. compl.
Spindle L.H. compl.
Thrust bearing
Large gear set with clamping
sleeves 36
pressure spring
sleeves 37
sleeves 36
Bush
Spacer ring
Spacer
Cover plate with washer
Drive shaft
Drive shaft
Connection shaft
Gearbox cover
Bush
Bush
Crank handle with grip 29
Crank holder
Brace ear
Pin
JS
JS
JS
JS
JS
JS
JS
JS
JS
36
37
38
39
40
41
42
43
44
45
46
Clamping sleeves
Clamping sleeves
Plu
Grease nipple
Bolt
Bolt with nut
Bolt with nut
T Foot
Axle
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
15
16
17
18
19
20
21
22
23
24
25
26
27
28
33
34
35
2111-12*
2111-11*
2112-01*
2116-09
2118-01
2116017
2114-10*
2114-11*
1101-18
JS 1118-056
JS 4118-06
JS 1118-14
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
JS
1118-15
1101-02
1101-07
1401-01
2101-03
2114-07
2114-12
1110-01
2111-09
1101-08
1101-10
1118-03
1101-17
2111-08
1120-07
1118-08
1118-09
1101-12
1120-06
1118-04
1120-59
1118-10
1118-11
2118-02
2116-01
2118-01
REPAIR KITS
for type E 100
ER 100 *

drive for type E 100
EL 100 *

for type E 140
ER 140 *
Leg complete L.H. with drive

for type E 140
EL 140 *
Inset for corrosion protection
JS 2118-03

8/08

177
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting and maintenance

instructions
Before mounting, both jacks must be in retracted position, in order to take advantage of the
total stroke after mounting connection shaft and to avoid premature ground touch of one
jack. Otherwise one single jack would have to carry the total load, causing damage.
The jacks must be mounted parallel and properly aligned, otherwise the connection shaft
could tilt and make the landing gear hard to operate.
When fitting crank extension JS 2 for telescopic landing gears for two side operation, note
different gear box position.
Fitting and bracing should be carried out as shown below.
The introduction of air suspension on semi-trailers has resulted in an increase of related

problems.
When the semi-trailer has been standing for a considerable time a loss of air in the suspension
is liable to occur, causing the rear part of the trailer to sink down.
This in turn results in an angular movement of the axle, forcing the trailer in the direction of
travel if the brakes are on. This movement depends on the type of air suspension, the spring
deflection and the size of the tyres.
The larger the drift and the greater the force the greater is the chance of the landing gear
being subjected to a force with which it cannot cope, ultimately resulting in it being bent.
This damage is a secondary consequence of the loss of air.
This can be avoided by using landing gear with drift compensation.
The JOST A foot is a semi-wheel which is able to compensate for the entire movement of
the trailer and remove the force of drift from the landing gear.
A paved surface is essential for the correct function of this version.
A further variation is the JOST S foot. The large sand shoe cannot sink in and can therefore
also be used on an unpaved surface.
8/08

178
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Mounting and maintenance

instructions
Operating instructions
Uncoupling:
1. Block wheels of semi-trailer.
2. Unlock and engage crank handle.
3. Wind down landing gear in high gear until ground is touched.
4. Shift to low gear position by pushing the crank handle towards the gear box and lift
to necessary height.
Caution: Stop cranking when end of travel is reached.
Coupling-up:
1. After locking the fifth wheel wind-in landing gear in low gear until inner leg has left
the ground.
2. Shift to high gear by pulling the crank handle and wind-in inner leg.
Caution: Stop cranking when end of travel is reached.
3. Fasten crank handle in holder, making sure that high gear is still engaged.
Attention:
If landing gear with two side operation is operated by only one person the gears of the
non-operated side must be in the neutral position.
Maintenance instructions
The landing gear received adequate initial lubrication during manufacture. Relubrication is
possible through grease nipples provided.
The spindle is lubricated with BP grease JS 12 by the lower of the two grease nipples
located on the side of the housing. Prior to lubrication wind down the landing leg as far as
possible and during lubrication slowly wind it up. For subsequent lubrication of the other
greasing points we recommend the use of high pressure grease (EP) with MoS, or graphite
additive, for example:
BP L2 1M
BP HT-EP 1
BP JSS2
Esso universal grease M
Shell Retinax AM
When inspecting the trailer, all parts which are subject to wear must be checked and
replaced if necessary, at the latest after four years operation.
These instructions are based on normal conditions of use. In the case of difficult operating
conditions the maintenance and lubrication intervals must be reduced accordingly.
8/08

179
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
D 200 T & D 200 A
Features
compact design
long life high precision power train
480 mm lift
full length back plate
shock resistant
maximum resistance to bending
vertical gear box
Technical Data
D 200 T
mounting height (MH)
lift
lifting capacity
static load
lift per turn of the crank
- low gear
- high gear
crank force at 16 t load
835 mm
480 mm
24 t
50 t
1,0 mm
10,6 t
230 N
The weight of 1 complete set of D 200 T (left/right leg,

connection shaft, crank) is 118kg.
* Also available with air suspension foot.
8/08

180
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for D 200 T
31
32
Fig.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Cover, left with screws

Cover, right with screws
Connection shaft
Small bevel gear with clamping sleeves
Large bevel gear with clamping sleeves
Bearing
Drive shaft
Plug
Grease nipple
Collar
Drive shaft
Bearing
Bearing
Large gear set with clamping sleeves
Part No.
DS 4118-0132
DS 4118-0132
DS-L10
DS 1118-0015
DS 1118-0014
DS 1101-0008
DS 4114-0004
DS 1101-0012
DS 1101-0177
DS 1101-0002
DS 4114-0003
DS 4101-0113
DS 1101-0007
DS 1118-0005
DS 1118-0004
Crank drive pinion with pressure spring and balls DS 1118-0006
Gearbox cover
DS 7111-0001
Self tapping screw
DS 1120-0073
Bush
DS 1101-0017
Crank handle with crank handle grip DS-U85
Fig.
Description
Part No.
21
22
23
24
25
26
27
28
29
30
31
32
Crank parking hook

Shaft left
Shaft right
Thrust bearing
Spindle left, compl.
Spindle right, compl.
Pin
Supporting tube
Sand shoe
Airbag foot
T foot compl. includes 29&30
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
1101-0017
4118-0131
4118-0130
1101-0160
4114-0130
4114-0129
1120-0007
4112-0131
4116-0145
4118-0096
D02
D04
REPAIR KITS

Leg complete L.H. without drive
for type D200T00000

for type D200T00000
8/08

181
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
182
Buyers Jockey Legs

Part Number: BPC 0091310
2-1/2 Square Tube Jack
Top Wind 26 Travel
Capacity:
Weight:
Part No
0091310
7000lbs
12.5lbs
A
A
B
B
Retracted Extended Retracted Extended
22.38
38.0
36.0
51.63
10.0
2.75
2.50
2.25
2.0
10.0
2.75
2.50
2.25
2.0

2-1/2 Square Tube Jack
Side Wind 26 Travel
Capacity:
Weight:
Part No
0091340
7000lbs
12.5lbs
A
A
B
B
Retracted Extended Retracted Extended
22.38
38.0
36.0
51.63
8/08

183
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Buyers Jockey Legs

4-1/2 Heavy Duty Square Tube Jack
Side Wind
Capacity:
Weight:
12000lbs
60lbs
Part No
0091405
A
A
Retracted Extended
27.50
53.50
Travel
12.50
Part Number: BPC 0091205 - 0091215

Swivel Jockey Leg
Top Wind 10 Travel
Capacity:
Weight:
20000lbs
11.14lbs
Part No
0091250
0091215
A
A
Retracted Extended
10.75
14.50
21.0
29.0
B
3.75
9.75
8/08

184
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
185
Automatic
towing hitches
& tow eyes
186
Towing eyes 40mm

Rock 57374
Towing eyes according to DIN 74054-40A

pressed-in replaceable towing eye sleeve 40 mm inner diameter
D-value 120kN
CRN 24527

8/08

187
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Towing eyes 50 mm
Rock 57272
Towing eyes according to DIN 74053
pressed-in replaceable towing eye sleeve 50 mm inner diameter
Part no.
Rock 57272
Material:
heat-treated steel St 52-3
D-value:
191 kN
Weight:
10.3 kgs
Down Load: 1000 kgs
CRN: 29202
Rock 57394 c/w solid bush
Part no.
Rock 57394
Material:
heat-treated steel St 52-3
D-value:
314kN
Weight:
13.4 kgs
Down Load: 1000 kgs
D-value is reduced to 190kN with 100
kgs down load.
CRN: 24529
8/08

188
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
189
Towing eyes 50mm

Replaceable Toweye
Rock 57254
Part no.:
Rock 57254
Material:
D-Value:
Steel Ck 45
heat-treated
to 630 - 780 N/mm2
191 kN
Weight:
CRN:
18,5 kg
29201

8/08

190
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

towing eyes Rock 57254
Fig.
Description
Part No.
Towing eye with Fig. 6
Rock 57292
Towing eye housing
AK 1271
Washer
AK 1272
Nut
AK 1265
Split pin
AK 1273
Solid Bush
R 53004
1,3,4,5,6
8/08

191
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Jost Tow Eye Lock
Dust Cap
Lock Bolt
Eye Lock
Retaining Cup
Features:1. 10mm thick top and bottom plate, case hardened.

2. No padlock, uses highly developed Super Lock Bolt, 25.4mm diameter, case
hardened body. Anti drill centre pin, 10 pin radial pin tumbler lock insert with over 1
million possible key combinations.
3. Easy to operate, only the lock bolt needs to be removed to unlock trailer.
4. Lock bolt can only be locked/unlocked using key, no accidental locking possible.
5. Dust cap provided to prevent ingress of dust and dirt into lock.
6. Finished in highly visible, yellow powder coating.
7. 2 keys supplied with lock as standard. Multiple locks can be supplied with same key
for fleet or multi user applications.
8. Independantly tested and approved by SCM. Approval No. MP030417.
Model
SA12 Eye Lock
Dimension A
Dimension B
51mm
95mm
Weight
5.0kg
8/08

192
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Buyers Towing eyes
Part no.
Model:
Description:
D-Value:
CRN:
Dimensions:
Part no.
Model:
Max Capacity:
Vertical Load:
D Rating:
CRN:
Weight:
BPC BDB 1394

45-Ton Forged Heavy
Duty Towing Eye
Finished with black
powder coat for superior
durability and corrosion
resistance.
165kn
37264
3 I.D. with 1.62 section
drawbar with 4 hole
square mounting plate.
BPC 0063126
51337 Demountable Eye
BPC 0063126B Mtg Block
25 Tonne
4.5 Tonne
8 Tonne
16133
11 kg
A=3 B=8 5/16 C=2 D=1 5/8
8/08

193
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
194
Welding instructions
recommended for
Rockinger Drawbar Eyes
1. Rockinger drawbar eyes are provided for welding into the drawbar by electric
arc welding, preferably done under a protective gas shield.
2. The steel of the drawbar has to be weldable, e.g. made of St 37-2 or St 52-3
or any other compatible weldable steel with a carbon content of less than
0.22%.
3. Remove all paint, grease and rust from welding surfaces. Heating up of
drawbar eye to 200 - 250C before beginning to weld is recommended.
4. The drawbar eye must not be welded within a length of *mm measured from
the middle of the drawbar eye access towards the back. This part should
protrude out of the drawbar.
5. The welding should be exercised in one seam at a time only, in order to avoid
overheating the surrounding space of the welding seam.
6. Carry the welding onwards to the direction of the drawbar eye access in one
procedure.
7. All seams have to be layed in longitudinal direction of the drawbar eyes shaft.
Never and by no means crosswire.
8. Each seam of welding should be set one by one diagonally opposite to the
last one, so you maintain an even radiation of heat.
9. Cooling down of the welding should take place where the air is still; do not
immerse into water or pour water over it.
10. If wanted, you can place slot welds through the lateral surface of the
drawbars sectional steel. This is in order to fix the drawbar shaft to the
drawbar aditionally.
11. The thickness of the welding seams is to be approximately 8mm in full Vshape or half V-shape.
12. The thickness of the sectional connecting bars should be atleast 8mm, better
from 10mm - 12mm.
Drawbar eyes:
57268 DIN
57262 DIN
57260 DIN
57272 DIN + ISO
57254 Rockinger for 56, 561 and 702
57006 ring 41 strong, NATO
65 x 55
50 x 40
40 x 40
65 x 60
40mm = 210mm
40mm = 210mm
40mm = 210mm
50mm = 210mm
50mm = 195mm
76mm = 180mm
8/08

195
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Couplings
and drawbar eyes
Coupling and drawbar eye size
Hole pattern in the crossbar of the towing vehicle
Hole pattern in the coupling flange
Pin size of the coupling
Characteristic values
Values of the coupling
Values of towing vehicle and trailer
(see vehicle registration certificate)
Values of the drawbar eye
Truck and trailer: D-value

Theoretical horizontal force between towing
vehicle and trailer
The D-value can only be calculated with the
permissible total weight of both truck and trailer.
Calculation of the D-value [kN] with formula 1
(F1):
T: Total weight of the towing vehicle in t
R: total weight of the drawbar trailer in t
g: Gravitation acceleration 9,81 m/s
The calculated D-value can be equal to or lower
than the D-value of the coupling and of the
drawbar eye.
In case of mounting on a trailer is permitted use
formula 2 (F2):
R1: Total weight of trailer where the coupling is
mounted (max. 24 t) R1 =/> R2
Towing vehicle and central-axle trailer: Dc-value (Valid only in connection with the
V-value
Theoretical horizontal force between towing
vehicle and trailer
The Dc-value can only be calculated with the
permissible total weight of both towing vehicle
and central-axle trailer.
Calculation of the Dc-value with formula 3 (F3):
T: Total weight of the towing vehicle in t
C: Sum of the axle loads of the central-axle
trailer in t
g: Gravitation acceleration 9,81 m/s
The calculated Dc-value can be equal to or lower
than the Dc-value of the coupling and of the
drawbar eye.
8/08

196
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Couplings
and drawbar eyes
Central-axle trailer: V-value (Valid only in connection with the Dc-value)
Vertical force for central-axle trailer
Dependent on the rear axle suspension of the
towing vehicle.
Calculation of the V-value [kN] with formula 4
(F4):
a: An equivalent verticle acceleration in the coupling point in m/s
(a = 1, 8 for vehicles with air suspension/ a = 2, 4
for vehicles with other suspensions)
I: Theoretical drawbar length in meters
x: Length of the loading area in meters (x/I :
atleast 1, 0)
C: Sum of the axle loads of the central-axle
trailer in t
The calculated V-value can be equal to or lower
than the V-value of the coupling and of the drawbar eye.
Central-axle trailer: Static vertical load (Valid only in connection with the V-value)
Vertical load of the central-axle trailer on the coupling point.
The vertical load depends on the size of the coupling and the maximum is 10% of
the gross weight of the trailer or 1000kg (whichever is less).
When using a central-axle trailer the vertical load should amount to at 4% of the trailer
weight in order to prevent increased wear caused by bouncing of the drawbar eye.
8/08

197
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Series RO*400
Series RO*400
Type 400 G 150 e1 00-0350
for drawbar eyes 40 to
DIN 74054 and EC class S
Size
a
(mm)
b
(mm)
c
(mm)
d
(mm)
e
(mm)
f
(mm)
150
160
100
200
140
21
94
Centre-Axle Trailer
Part no.
Hand lever up
Part no.
Hand lever down
Size
Hole
pattern (mm)
Admissible
D-value*(kN)
Admissible
Dc-value* (kg)
Admissible static
vertical load**
Admissible
V-value* (kN)
Weight
(kg)
400A5100
400B5100
150
160 x 100
130
90
1000
35
31
* Please refer to list A for calculation

** Recommendation: with centre-axle trailers the static vertical load should be atleast
4% of the towed load to avoid a negative vertical load which can cause damage.
Upgrade kits:
Mechanical remote control
Hydraulic remote control
In-cab status indicator
Drawbar turn angle warning system
part no. 70962

In preparation
part no. 70936
part no. 70935
Grip (KL in drawing):

- Centre-axle trailer
G 135
11mm - 32mm
G 145/G 150
11mm - 35mm
- Full trailer
G 135
G 145/G 150
max. 32mm
max. 35mm
8/08

198
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

Series RO*400
Fig.
Description
Remark
Part No.
1
2
2
4
5
6
7
8
11
13
16
17
18
19
R
Automatic unit
Hand lever
Hand lever
Coupling pin
Safety system
Lower bush
Support ring
Funnel
Bearing repair set
Nut cover
Guide bush
Base plate
Bearing rings for funnel
Upper bush
Repair set
without 4
A
B
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
with 7
with 18
for 46, 51
for 46, 51
4, 6, 9, 16, 17, 19
Quantity
70944
50244
70735
47099
70925
53519
59278
70812
25477
25347
53467
65626
25479
53520
71124
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
When replacing the coupling pin (4), please check the safety system (5) and if required, substitute it.
Before replacing the support ring (7) the lower bush (6) is to be cleaned.
8/08

199
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Series RO*500
Size
a
(mm)
b
(mm)
c
(mm)
d
(mm)
e
(mm)
f
(mm)
5/6
160
100
200
140
21
94
Size
model
L1
(mm)
L2
(mm)
L3
(mm)
Lm
(mm)
C
(mm)
S
(mm)
63
184
315
195
23,5
13
min.
260
Centre-Axle Trailer
Order no.
Size
Hole
pattern (mm)
Admissible
D-value2 (kN)
Admissible
Dc-value*(kN)
Admissible static
vertical load3 (kg)
Admissible
V-value2 (kN)
KL4
(mm)
Drawbar trailer
KL4 (mm max.)
500A6300
160 x 100
260
113
2500
43,2
28-35
35
Hand lever down

Please refer to list A for calculation
Recommendation: with centre-axle trailers the static vertical load should be atleast
4% of the towed load to avoid a negative vertical load which can cause damage.
4
Max. grip
Josts RO*500 now rated to 260kN

D value at zero download
i.e hinged drawbar application
CRN 28986
8/08

200
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

Series RO*500
Fig.
Description
Remark
Part No.
1
2
2
3
4
5
5
6
6
7
7
8
8
9
10
11
12
13
15
16
17
18
19
R
Automatic unit
Hand lever
Hand lever
Screw set
Coupling pin
Safety system
Safety pin
Lower bush (bronze)
Lower bush (steel)
Support ring (bronze)
Support ring (steel)
Funnel
Funnel
Base plate set
Screw set
Bearing repair kit
Castle nut
Nut cover
Support plate
Conical cap
Guide bush
Base plate
Bearing rings for funnel
Repair set
without 4
A
B - Australian version
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
with grease tube

revision 1
revision 0
with 7
with 7
with 19
with 19, reinforced
with protection
for 6
for 6, with split pin
for 4, 5, 6
for reinforced version
for 6
4, 5, 6, 9
Quantity
70849
50244
70735
30269
47081
70925
52439
53490
53536
70850
70851
46111
46118
65693
30358
25345
56102
25347
59144
59141
53467
65626
25479
71125
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
When replacing the coupling pin (4), please check the safety system (5) and if required, substitute it.
Before replacing the support ring (7) the lower bush (6) is to be cleaned.
8/08

201
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Series RO*56E
Versions available
Order no.
(mm)
D-value
Weight
CRN
RO 56E
s. drawing
314
80
39824
50mm fully automatic trailer coupling

Heavy duty coupling for highway and off road
8/08

202
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

Series RO*56E
Fig.
Description
Remark
1
2
3
4
5
7
8
10
11
15
16
17
18
19
20
22
23
25
25
25
26
28
29
30
31
33
37
38
40
43
46
47
50
52
53
55
56
57
58
R
Funnel
Funnel spring
Upper bush
Lower bush
Base plate
Bolt M 10 x 28
Bolt M 10 x 30
Spacer
Buffer cover
Safety pin
Hitch pin
Sealing cover
Bolt M 6 x 12
Washer 16
Notch lever
Locking lever
Grooved pin 8 x 30
Hand lever
Hand lever
Hand lever
Lifting lever
Locking spring cam
Locking spring
Support
Axle to lift up lever
Bolt 18 x 113
Bolt 18 x 139
Leaf spring 2
Spring cap
Washer 31
Notch cam
Cam spring
Spacer
Drawbar element
O-ring or 129, 2-5, 7
Spacer
Drawbar element
O-ring or 149, 2-5, 7
Cap
Repair set
with 3
Repair set
for vers. E
DIN 9311
for vers. E
with spring cap
DIN 1474
for type 561 E
B, for type 56 EU
for type 56 E
with pin 27
with 10, 11, 12
for type 56 E
for type 561 E
3,4,16,21,24,32,34,34-1,35,36,39,
42,44,45,48,48-2,49,54
3,4,16,21,24,32,34,34-1,35,36,39,
42,44,45,48,48-1,48-2,49,54
Part No.
Quantity
70463
55005
53019
53244
65549
57236
56024
15008
25010
68000
47041
65009
70249
33011
51012
51013
32007
50092
50177
50084
51036
13005
55024
65010
52002
52011
52009
55026
65066
33002
52014
55028
54274
42016
25062
54276
42014
25063
25104
66920
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
3
3
1
1
1
1
14
1
1
2
1
1
1
1
1
1
1
1
67252
8/08

203
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Series RO*243
Versions available
Order no.
A/B
Size
243A3500
135
Hole
Admissible
Admissible Admissible static Admissible
pattern (mm) D-value1 (kN) Dc-value1 (kN) vertical load (kg) V-value1 (kN)
120 x 55
30
30
350
12,0
(kg)
e1
CE/94/20/cl. C50-X
4,4
00-0051
s. p. 14
diagonal
Also for industrial trucks (transport carts, fork lift trucks, etc.) with maximum total weight up to 5t and maximum towed load up to 20t
(without vertical load only for inside-factory transport).
8/08

204
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

Series RO*243
Fig.
1
2
3
3
3
4
5
6
7
8
9
10
Description
Coupling pin
Sealing cover
Hand lever
Hand lever
Hand lever
Cap
Locking spring
Repair set locking lever
Drive-in grease nipple
A 10 x 1
Safety system
Split pin
Washer
Type plate
Remark
Part No.
for vers. K, S and A35 with 4, 9, 10

with 9, 10 for vers. new B11, B12; old L, V
with 4, 9, 10 for vers. new A11, A12; old N, U
in 6
3, 4, 5, 9, 10
R
R
R
R
R
R
Quantity
47026
67411
70353
70354
70355
25106
1
1
1
1
1
1
1
1
R 70927
R 65018
R 70618
1
1
1
1
in 3, 6
in 3, 6
on request
8/08

205
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Series RO*283
Technical Specification
Hook trailer coupling with buffers and safety lock
Size
L1
(mm)
L2
(mm)
L3
(mm)
L4
(mm)
135
145
150
74
88
88
167
180
180
131
156
156
372
410
424
Size
a
(mm)
b
(mm)
c
(mm)
d
(mm)
e
(mm)
f
(mm)
Size
a
(mm)
b
(mm)
150
160,0
100,0
200,0
140,0
21,0
94,0
5/6
160
100
Versions available
Order no.
Size
Hole
Admissible
Admissible Admissible static Admissible
Centre-axle
Semitrailer (kg)
pattern (mm) D-value1 (kN) Dc-value1 (kN) vertical load (kg) V-value1 (kN) trailer weight (t) weight (t)
283A5000 150 160 x 100

283A5009 150 160 x 100
160
160
1500
1500
40
40
31,0
31,0
s. p. 14
8/08

206
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Spare parts for

Series RO*283
Fig.
1
1
1
2
2
3
4
5
5
5
6
7
7
8
8
9
9
9
10
10
11
11
12
12
Description
Locking unit
Bolt
Castle nut
Split pin
Safety pin
Type plate
Repair set springs
Spring cap
Attachment bearing
Washer
Castle nut
Nut cover
Remark
Part No.
for
for
for
for
for
R
R
R
R
R
R
R
R
R
R
66393
66324
70932
52036
52037
56030
35024
65036
65104
70285
1
1
1
1
1
1
1
1
1
1
R
R
R
R
R
R
R
R
R
R
R
R
R
70343
70344
44080
44079
43242
43235
43236
54707
54680
56051
56049
25076
25072
1
1
2
2
1
1
1
1
1
1
1
1
1
A
A
A
A
A
35, A 45
50
509
35, A 45
50, A 509
for A 35, A 45
for A 50
for A 509
on request
for A 35
for A 50
for A 35
for A 50
for A 35, with bushes
for A 45, with bushes
for A 50 with bushes
for A 35
for A 50
for A 35
for A 45, A 50, A 509
for A 35
for A 45, A 50, A 509
Quantity
8/08

207
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Series RO*805B
Technical data:
Non-automatic trailer coupling with
flange bearing hole pattern: 120mm x
55mm
Technical data
Part no.
D1
(kN)
60,4
369U130
S2
(t)
0,65
ABG
M
3455
D-value
Statical vertical load
Usable on agricultural trailers only

(R) (p.e. R = 16 t; R = 10 t)
Admissible total weight of a vehicle
combination of 40 t
Usable drawbar eyes
DIN
74054
nominal dimensions
a (mm)
b (mm)
c (mm)
100
40
30,5
turn-angle (see fig.)

horizontal vertical
min. 80 min. 20
Dimensions of the coupling
Spare parts for series RO*805B

no.
1
Designation
Insert pin
Type plate
Piece
1
Part no.
R 70323
Upon request
8/08

208
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Buyers Products Company

Rigid mounted pintle hooks
BPC BH 850MM (8 Ton)
Capacity
3,000 lbs. maximum vertical load
16,000 lbs. M.G.T.W.
Description
Drop forged combination pintle hook/ball hitch. Forged steel ball.
Interchangeable hitch balls. Finished with black powder coat for
durability and corrosion resistance.
Drawbar Eye Dimensions
2-1/2 to 3 up to 1-9/16 cross section.
Hitches are shipped with drilling template, capacity decal, and are
individually boxed.
Weight 13lbs
CRN 37265
BPC P 45 AC4 & BPC P AC4BK (45 Ton)

BPC P 45 AC6 & BPC P AC6BK (45 Ton)
Buyers Pintle Hooks feature a double-safe locking system with a lock/
clasp/impact arm interacting design that combine to prevent release of
the eye when air pressure is applied. The Air Compensated Pintle Hooks
must be used with a brake chamber.
The air brake chamber is constructed to interact with the closed clasp
to prevent uncoupling when air is applied.
P45AC4 is to be used with a lunette eye having an internal diameter between
2-3/8 and 3, and a material cross section between 1-1/4 and 1-3/4 in diameter.
P45AC6 is to be used with a lunette eye having an internal diameter between 2-3/8
and 2-5/8, and a material cross section between 1-5/8 and 1-3/4 in diameter.
Weight: BPC P 45 AC4 26lbs
Weight: BPC P 45 AC4BK 3.2lbs
CRN 37266
8/08

209
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

BPC PH 5 WMK (5 Ton)
Capacity
10,000 lbs. M.G.T.W.
Description
Light-duty rigid type pintle hook. Finished with black powder coat for
durability and corrosion resistance.
2 to 3 I.D. with 1-1/4-1-5/8 diameter section.
Hitches are shipped individually boxed and include mounting
information, spec. sheet and drilling template.
Weight 8.25lbs
CRN 37269

Capacity
16,000 lbs. M.G.T.W.
Description
Drop Forged Alloy Steel Rigid Type Pintle Hook.
Finished with black powder coat for durability and corrosion resistance
2 to 3 I.D. with 1-1/4-1-5/8 diameter section.
Pintle Hooks are individually boxed and include mounting information,
spec. sheet, drilling template, vehicle capacity decal.
Weight 9.57lbs
CRN 37270
8/08

210
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Capacity
30,000 lbs. M.G.T.W.
Description
Drop forged alloy steel rigid type pintle hook.
Finished with black powder coat for superior durability and corrosion
resistance.
2 to 3 I.D. with 1-1/4 to 1-5/8 diameter section.
Pintle hooks are individually boxed and include mounting information
sheet, spec. sheet, adhesive backed drilling template, and vehicle
capacity decal.
Weight 11.75lbs
CRN 37267

Capacity
40,000 lbs. M.G.T.W.
Description
Drop forged alloy steel rigid type pintle hook.
Finished with black powder coat for superior durability and corrosion
resistance.
2 to 3 I.D. with 1-1/4 to 1-5/8 diameter section.
Pintle hooks are individually boxed and include mounting instructions,
specifications sheet, adhesive backed drilling template, and vehicle
capacity decal.
Weight 13.3lbs
CRN 37268
8/08

211
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Pintle Hook Mount
Part Number: BPC PH 87

Capacity:
907kg: maximum vertical load
4535kg :M.G.T.W.
Description:
Pintle Hook 4 hole mount
Weight:
6.8kg
8/08

212
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Choice of the
coupling / calculation
Choice of the coupling
tractor
bearing of the coupling
1.
flange bearing
2.1
lift bearing
1.
Hole pattern at rear tractor:

coupling with flange bearing and corresponding hole pattern
2.
Coupling holder of tractor
2.1 Coupling with lift bearing

2.2 Coupling with insert pin bearing
2.2
insert pin bearing
Calculation
1. total vehicle combination weight
Admissible total vehicle combination weight:

currently 40t.
In absence of D-value specification:
Admissible total vehicle combination weight (currently 40t) minus
admissible total weight of tractor
2. towed load
3. D-value
D-value (not for all couplings)

Theoretical horizontal force between towing vehicle and trailer;
comparative mathemathical value of forces between moving
masses.
The D-value can only be calculated with the permissible total
weight of both truck and trailer.
Calculation of the D-value (kN):
TR
D=g
T+R
T: total weight of the towing vehicle in t
R: total weight of the turnable trailer in t
g: gravitation acceleration (9,81 m/s)
The calculated D-value can be equal to or lower than the D-value
In case mounting on a trailer permitted:
R1 R2
D=g
R1 + R2
R1: total weight of trailer where the coupling is mounted (in t)
> R2
R1 =
3. Static verticle load
Static verticle load

vertical load of the central-axle trailer on the coupling point
The vertical load depends on the size of the coupling and the
maximum is 10% of the gross weight of the trailer or 1000kg
(whichever is less).
When using a central-axle trailer the vertical load should amount
to at 4% of the trailer weight in order to increased wear caused
by bouncing of the drawbar eye.
Size of static vertical load is also a function of speed.
Central-axle trailer (C):
Use admissible in principle:
size of central-axle trailer depends on characteristics of drawbar
eye and tractor unit
please see table for restrictions
8/08

213
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Choice of the
coupling / calculation
Drawbar eye
Page 201 of this manual contains indications concerning the
dealing with the load values of coupling and drawbar eye.
Couplings and drawbar eyes for the road traffic which have been
verified according to european standard specification 94/20 have
special fixed identying sizes, the Dc-value and the V-value, for the
operation with the central-axle trailer.
These values are not of importance in the agriculture and forestry.
Since the Dc-value and the V-value are indicated with some of the
following mentioned drawbar eyes, these sizes are briefly
explained.
Towing vehicle and central-axle trailer

Dc-value
(valid only in connection with the V-value)
Dc
theoretical horizontal force between towing vehicle and trailer.

The Dc-value can only be calculated with the permissible total
weight of both towing vehicle and central-axle trailer.
Calculation of the Dc-value (kN):
TC
Dc (kN) = g
T+C
T: total weight of the towing vehicle in t
C: sum of the axle loads of the central-axle trailer.
g: gravitation acceleration 9,81 m/s
The calculated Dc-value can be equal to or lower than the
Dc-value of the drawbar eye.
Central-axle trailer:
V-value
(valid only in connection with the Dc-value)
vertical force for central-axle trailer.

dependent on the rear axle suspension of the towing vehicle
Calculation of the V-value (kN):
x2
V (kN) = a
C
l2
a: an equivalent vertical acceleration in the coupling point in m/s
a = 1,8 for vehicles with air suspension
a = 2,4 for vehicles with other suspensions
l: theoretical drawbar length in meters
x: length of the loading area in meters
x / l: atleast 1,0
C: sum of the axle loads of the central-axle trailer in t
The calculated V-value can be equal to or lower than the
V-value of the drawbar eye.
8/08

214
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
215
Hubodometer
and
Hub Caps
216
HUBODOMETER
for all tyres sizes
JOST HUBODOMETER
is a precision instrument for all kinds of
wheeled
vehicles, e.g.
semi-trailers
trailers
low-bed trailers
buses
trains
and other equipment.
JOST HUBODOMETER
will record information for
maintenance schedules
wear and tear controls
mileage of leasing vehicles
exact data for calculation of transport costs
validating guarantees
Smallest dimension
overall depth only 23 mm
Mounting
directly to the wheel cap or shockproof mounting
in a special wheel cap
Recording mechanism
Completely and permanently sealed.
Filled with inert gas against
fogging and ingress of moisture or dirt.
Records forward and reverse motion.
Completely tamperproof.
Records up to one million miles.
Records in kilometres or miles.
All parts corrosion resistant.
weight: 0.24 kg
3 Year or 500,000kms warranty, whichever
comes first.
When ordering please state:
1. exact tyre size resp. circumference
2. calibration for kilometres or miles.

217
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
for Hubodometer
When mounting the hubodometer to your existing hubcap proceed as follows:
Check whether there is enough clearance to the end
of the axle, at least 6 mm clearance is required after
mounting. The contact surface of the hub-cap must be
flat, if necessary by machining. Drill the concentric 13
mm mounting hole. Install the hubodometer with the
spring washer and nut supplied.
Torque the nut to 15Nm (1,5mkp) maximum, just
sufficient to flatten the spring washer.
Hubodometer - short version

Where fitting has to take place in a restricted space
this type of Hubodometer is used. It has a shortened
clamping bolt. Fitting is effected using a special plain
nut and a combined sealing/retaining ring. Tightening
torque max. 15 Nm (1,5 mkp).
Fixing and centring in the axle cap requires a concentric
hole of 15,1 mm diameter. With axle caps of more than
2 mm wall thickness the nut should be counterbored.
Important
The Hubodometer must be fitted concentrically.
Oscillations due to running out of true will impair life
and accuracy. Check that the permissible vehicle width
is not exceeded when the Hubodometer is fitted. No
chemical agents should be used when cleaning the
Hubodometer.

218
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
HUBODOMETER for all tire sizes
8/08

219
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Special hub caps for

Hubodometer
Special aluminium JOST axle caps
protect the Hubodometer from external damage. They are provided with a concentric bore for securing the
Hubodometer, fitting is quick and easy. Threaded axle caps must be re-tightened after the first 500 km (300
miles).
Special axle caps

with self-locking thread. Fitting is carried out
using standard axle cap spanner.
A
B
C
mm mm mm
17,5
17,5
68
68
width
across
the flats
Axle cap
thread
Axle
manufacturer
Part No.
94
109
M 115 x 2
M 125 x 2
BPW
BPW
JHU 202
JHU 203
98
98
Other dimensions upon request
Special axle caps

for flange mounting
A
Bolt hole dia.
139,7
B
mm
56
C
mm
86
D
mm
112
Axle
manufacturer
SAUER/ROR
Part No.
JHU 300
Other dimensions upon request

Items supplied: Axle Cap
Seal

220
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Special axle caps for

Hubodometer on oil filled axles
Special axle caps

for oil filled axles with flange mounting. Two glass indicators are
provided to check the oil level
A
Bolt hole dia.
139,7
B
mm
56
C
mm
86
D
Axle
mm manufacturer
112 SAUER/ROR
Part No.
JHU 300-1
Other dimensions on request

Scope of supply: Axle Cap
Seal
Glass indicators

221
8/08
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Twist Locks
222
Retractable Twistlock
(Complete with housing & short mechanism)
TLB-122-805-S
Twistlock in retracted position (fig.1)
Type:
Housing Only:
Mechanism Only:
Weight:
TLB-122-805-S
TLB-122-805-H
TLB-122-805-M
8.5kg
Cast steel & M.S. Plate

B.L. Tensile:
10T
Operation
Manual
Surface Preparation
Painted
*Product modification can be made upon request
8/08

223
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
(Complete with housing & short mechanism)
TLB-122-805-S
8/08

224
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
& Spacer 2 1/4
TL B-122-0906
Retractable Twistlock & Spacer

Type:
Spacer:
Housing Only:
Mechanism Only:
Twistlock Only
(No Spacer):
Weight:
SPR=5.8kg
TLB-122-0906
TLB-122-09064
TLB-122-805LH
TLB-122-09062
TLB-122-09061
& TKTR-L=9.5kg
House-Cast Steel, Frame & Handle-M.S.

Plate Shaft-Forged.
B.L. Tensile: 10T
Operation
Manual
Surface Preparation
Painted
*Product modification can be made upon request
TLB-122-805-L:
Short mechanism with long casting
8/08

225
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137
Retractable Twistlock &

Spacer TL B-122-0906
8/08

226
Sydney
Brisbane
Melbourne
Perth
(02)
(07)
(03)
(08)
9838
3272
9360
9355
8100
5777
9001
4137

Jost Catalogo INGLES

Uploaded by

Copyright:

Available Formats

Jost Catalogo INGLES

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Jost Catalogo INGLES

Uploaded by

Copyright:

Available Formats

JOST AUSTRALIA PTY LTD

A.B.N. 60 001 081 778

OPERATING INSTRUCTIONS, REPAIR MANUALS, & MAINTENANCE INSTRUCTIONS

Selected Operating Instructions, Repair Manuals and Maintenance Instructions, which

Jost Australia Pty. Ltd.

CRN & D-Value Specification

150mm, 170mm, 185mm, 250mm & 300mm pedestals

150mm, 170mm, 185mm, 250mm & 300mm pedestals

JSK SLE 37E

DH 200 - Dual Height Fifthwheel

(Greaseless version of JSK 37 E)

150mm, 170mm, 185mm, 250mm & 300mm pedestals

(max height: 290mm, min height: 165mm)

For use with JSK 36 CV/150 with EV M Slider

For use with JSK 37 CZ/150 with EV M Slider

For use with JSK 36 CV/150 with EV P Slider

For use with JSK 37 CZ/150 with EV P Slider

Jost Australia Pty. Ltd.

CRN & D-Value Specification

KZ 1008, KZ 1010, KZ 1012, KZ 1012-16

KZ 0912/01 (Part of the KZ 0908 Assembly)

KZ 1408, KZ 1410, KZ 1412

KZ 1706, KZ 1707, KZ 1710, KZ 1712

BUYERS PINTLE HOOKS

CRN & D-Value Specification

BPC P 45 AC4 & BPC P 45 AC6

CRN & D-Value Specification

JOST & ROCKINGER TOWING EYES

CRN & D-Value Specification

(Replaces Jost ZO 59)

(Replaces Jost ZO 60/01)

ROCK 57272 (50mm Weld-In)

(Replaces Jost ZO 58)

ROCK 57254 (50mm)

(Replaces Jost ZO 60)

ROCK 57322 (50mm)

Jost Australia Pty. Ltd.

Ball bearing turntables

The right to alter specifications is reserved.

Jost Australia Pty. Ltd.

Fitting and maintenance

Fitting and maintenance

4. JOST turntables are lubricated with a lubricant

Jost Australia Pty. Ltd.

Ball bearing turntables

Note: SO1000-24 used in SO assembly

See reverse for fitting and maintenance instructions

The right to alter specifications is reserved

Jost Australia Pty. Ltd.

Fitting and maintenance

Fitting and maintenance

5. The ball bearing turntable must be lubricated

Drilling pattern for ball bearing turntables

Jost Australia Pty. Ltd.

mm approx.mm approx.mm approx.kg

The measurements are subject to our standard tolerances.

Slewing rings are supplied primed for corrosion protection.

Jost Australia Pty. Ltd.

Fitting and maintenance