Scribd Logo
Upload

Welcome to Scribd!

  • 233 views

    Lux A Prime 1501

    Uploaded by

    paulloh64
    1) LUXAPRIME 1501 is a two-component etching primer used to promote adhesion of subsequent coatings on non-ferrous metals like galvanized iron and aluminum. 2) It dries very fast and can be overcoated within 3 months. It provides excellent intercoat adhesion. 3) The primer should be applied by conventional air spray to non-ferrous metals that have been cleaned and abraded to remove contaminants and improve adhesion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lux A Prime 1501

    Uploaded by

    paulloh64
    233 views2 pages
    1) LUXAPRIME 1501 is a two-component etching primer used to promote adhesion of subsequent coatings on non-ferrous metals like galvanized iron and aluminum. 2) It dries very fast and can be overcoated within 3 months. It provides excellent intercoat adhesion. 3) The primer should be applied by conventional air spray to non-ferrous metals that have been cleaned and abraded to remove contaminants and improve adhesion.

    Original Description:

    Luxaprime 1501 Specifications

    Original Title

    Lux a Prime 1501

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) LUXAPRIME 1501 is a two-component etching primer used to promote adhesion of subsequent coatings on non-ferrous metals like galvanized iron and aluminum. 2) It dries very fast and can be overcoated within 3 months. It provides excellent intercoat adhesion. 3) The primer should be applied by conventional air spray to non-ferrous metals that have been cleaned and abraded to remove contaminants and improve adhesion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    233 views2 pages

    Lux A Prime 1501

    Uploaded by

    paulloh64
    1) LUXAPRIME 1501 is a two-component etching primer used to promote adhesion of subsequent coatings on non-ferrous metals like galvanized iron and aluminum. 2) It dries very fast and can be overcoated within 3 months. It provides excellent intercoat adhesion. 3) The primer should be applied by conventional air spray to non-ferrous metals that have been cleaned and abraded to remove contaminants and improve adhesion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    PROTECTIVE COATINGS

    LUXAPRIME 1501
    Etch Primer

    PRODUCT
    DESCRIPTION

    A two component, etching / wash primer based on a polyvinyl butyral resin, phosphoric acid and
    zinc chromate anti corrosive pigmentation.

    DESIGN
    FEATURES

    An acidic pre-treatment etching primer for use on galvanised iron, aluminium, zinc, copper and
    *other non-ferrous substrates to promote and enhance adhesion of subsequent coatings.
    Very fast drying.
    Can be over-coated with a variety of single pack and two pack products.
    Extended overcoating times of up to 3 months.
    Excellent intercoat adhesion properties.
    *Please consult your Berger Paints Representative for specific recommendations on substrate
    suitability and product suitability for overcoating.

    PHYSICAL
    CHARACTERISTICS

    APPLICATION
    METHOD

    DRYING &
    CURING TIME

    USEFUL
    INFORMATION

    Recommended Application Data


    Theoretical Coverage

    Wet [m]
    65

    m2/l
    16

    Dry [m]
    10

    Volume Solids

    16 %

    (based on ASTM D2697)

    Dry Film Thickness Range

    10 m (Do not exceed 20 m)

    Flash Point

    15 C

    Finish

    Matt

    Colour Range

    Green

    Standard Packing Size

    5 litres set ( 4 litres Base : 1 litres Acid Diluent)

    Mixing Ratio ( by volume )

    4 part Base : 1 part Acid Diluent

    CONVENTIONAL AIR
    SPRAY

    This is the recommended method of application.


    Use standard equipment with a pressure at 2.8 3.0 kg/cm.

    BRUSH OR ROLLER

    May be used for difficult shapes or touch-up; however, care must


    be taken not to exceed the recommended film thickness and
    ensure that an even film is applied.

    Substrate

    Touch Dry

    Hard Dry

    Temperature

    Overcoating Interval
    Minimum

    Maximum

    Pot Life

    15 C
    25 C

    30 minutes
    20 minutes

    2 hours
    1 hour

    6 hours
    4 hours

    3 months
    3 months

    10 hours
    8 hours

    35 C

    15 minutes

    30 minutes

    3 hours

    3 months

    6 hours

    THINNER

    CLEANER

    SOLVALUX 5-30 (Maximum 20 % for spray application)


    (Maximum 5 % for brush / roller application)
    SOLVALUX 5-30

    STORAGE

    Store in a cool dry shaded area.

    LUXAPRIME 1501
    Etch Primer

    SURFACE
    PREPARATION

    The service life span and the service performance of LUXAPRIME 1501 are directly related to
    the degree of surface preparation.
    NON FERROUS METALS

    Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given
    by SSPC-SP1.

    A wet abrasion using SOLVALUX 5-30 and abrasive paper will improve subsequent
    adhesion and ensure removal of surface contaminants.

    The surface to be coated must also be clean and dry.


    GALVANISED STEEL OR ZINC METAL SPRAY

    Ensure that white zinc salts and other surface contaminants are removed by abrading with
    abrasive paper or suitable mechanical tools.

    Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given
    by SSPC-SP1.

    The surface to be coated must be clean and dry.


    To avoid condensation of moisture onto substrate prior to coating application, relative humidity
    should not exceed 85% and substrate temperature should be more than 3 C above Dew Point.

    TYPICAL COATING
    SPECIFICATIONS

    Substrate Surface

    NOTES

    Priming

    2nd Coat

    3rd Coat

    4th Coat

    GALVANISED STEEL

    LUXAPRIME
    EPIMASTIC
    LUXATHANE LUXATHANE
    1501
    3000HS
    5075
    5075
    LUXAPRIME
    EPILUX
    EPILUX
    EPILUX
    1501
    58HS
    4
    4
    The coating specifications given above are typical. For specific recommendations to suit
    individual applications, please refer to your Berger Paints representative.
    Do not over-apply. Do not exceed 20m. Over-application may lead to loss of adhesion.
    Do not apply after the pot-life has expired although the paint still appears liquid.
    This product is not designed to confer opacity on the substrate.

    SAFETY
    PRECAUTION

    This product contains Zinc Chromates and Phosphoric Acid.


    Avoid contact with eyes and skin. Wear suitable protective clothing such as overalls, goggles,
    dust mask and gloves. Use barrier cream.
    This product contains low flash point solvents, do not use in poorly ventilated areas especially in
    confined tank interiors.
    Ensure that there is adequate ventilation in the area where the product is being applied. Do not
    breathe in vapour or spray mist.
    This product is flammable. Keep away from sources of ignition. Do not smoke.
    Take precautionary measures against static discharge.
    In case of fire, blanket flames with foam, carbon dioxide or dry chemicals.

    FIRST AID

    Eyes

    DISCLAIMER

    China
    Tel: +86-574-8617-8221
    Fax:+86-574-8617-8205

    In the event of accidental splashes, flush eyes with warm water immediately
    and seek medical advice.
    : Wash skin thoroughly with soap and water or approved industrial cleaner.
    Skin
    Do Not Use solvents or thinners.
    : Remove to fresh air, loosen collar and keep patient rested.
    Inhalation
    : In case of accidental ingestion, DO NOT INDUCE VOMITING. Obtain
    Ingestion
    immediate medical attention.
    For further safety information, please refer to our Material Safety Data Sheet (MSDS)
    :

    The information provided on this data sheet is not intended to be complete and is provided as
    general advice only. It is the responsibility of the user to ensure that the product is suitable for the
    purpose for which he wishes to use it. As we have no control over the treatment of the product,
    the standard of surface preparation of the substrate, or other factors affecting the use of this
    product, we are not responsible for its performance nor would we accept any liability whatsoever
    or howsoever arising from the use of this product unless specifically agreed to in writing by us.
    The information contained in this data sheet may be modified by us from time to time, and without
    notice, in the light of our experience and continuous product development.

    Hong Kong
    Tel: +852-2544-3768
    Fax: +852-2545-3984

    Malaysia
    Tel: +60-3-3392-8622
    Fax: +60-3-3392-0376

    Myanmar
    Tel: +95-1705-691
    Fax: +95-1-636384

    Singapore
    Tel: +65-6261-5224
    Fax: +65-6265-6356

    Thailand
    Tel: +662-754-2004
    Fax: +662-754-2084

    You might also like