TeraFlex 2015 Catalog

2015 product catalog
Fueling your passion

Lifestyles - We each have our own. Everyone here at TeraFlex is united by a common Jeep thread, but outside of that we also enjoy
other hobbies and activities. If you follow us on facebook or other social media sites you have undoubtedly seen some of the hobbies
that we enjoy. These hobbies become inseparably intertwined with our Jeeping lifestyle and also affect how each one of us use our
Jeep. From BMX to hiking, motocross to fly-fishing, we use our jeeps for virtually every outdoor activity that exists. Our Jeep becomes
an extension of us and we use it to represent our outdoor lifestyle.
We know that you are exactly like us, and enjoy your Jeep doing the things you love. Every TeraFlex component has been designed
and engineered to maximize the performance of your Jeep and to keep you active and experiencing life to the fullest. This philosophy
goes beyond simply building a suspension lift, replacement axle or a heavy duty bumper. Our components will get you there and
back - and let you enjoy your hobby without a second thought. We have a passion for performance and adventure. It has taken us all
over the world and has allowed us to explore the most remote locations.
We feel that if our products arent up to our own standards, then they arent good enough for you as well. We are constantly refining
and improving our designs to ensure that the product you receive will not disappoint. We have a strong team that is focused on our
mission statement, and skilled in their specific areas to ensure the products that we manufacture meet the requirements of that
statement. We are more committed than ever to this goal. We have increased quality, product tolerances, implemented 100% QC
inspection on many products, and have a solid development and production certification process that ensures proper tolerances and
engineering specifications are followed. We believe that by virtue of our highly designed and developed products you can have the
best experience every trip you make in your Jeep and that is our hope and mission.
JK WRANGLER & UNLIMITED
2-41
TJ WRANGLER & UNLIMITED
42-63
JK ActionTruck Conversion Kit

JK Elite LCG Suspension Systems
JK Outback Overland Suspension System
JK Lifts & Suspensions
JK Shocks - Fox, Teraflex VSS
JK Swaybars
JK SpeedBump Bumpstops
JK Components & Accessories
JK Body Armor, Bumpers, HD Tire Carrier, Exterior Components
TJ LCG Series Premium Suspension Systems
TJ Lifts & Suspension Systems & Kits
TJ Teraflex VSS Shocks
TJ Components & Accessories
TJ SpeedBump Bumpstops
TJ S/T Swaybars
TJ flexarms
TJ Body Armor
YJ WRANGLER
64-67
YJ Revolver Shackles
YJ Components & Accessories
YJ Swaybars
UNIBODY 68-73
XJ Budget Boost ,Swaybars, Components & Accessories
ZJ Budget Boost, Swaybars, Components & Accessories
WJ Budget Boost, Swaybars
WK Budget Boost Suspension
KJ & KK Liberty Budget Boost Suspension
XK Commander Budget Boost Suspension
HD MONSTER FLEXARM JOINTS
74-79
Monster flexarm Joints

Builders Parts & Rebuild Kits
LOW RANGE GEARING
80-85
AXLES & COMPONENTS
86-99
Dana 300 Low Range Kit

Dana 20 & 18 Low Range Kits
Np 231 Extreme Short Shaft Kit
Np 231 Heavy Duty Short Shaft Kit
Np 231 Heavy Duty Teralow 4.0:1 Case
JK Tera30 & Tera44 HD Replacement Axles
Tera60 Axle Applications
CRD60 Axle Applications
Brake Kits & Parts
Axle Steering Components
Full Float Axle Components
Axle Bracket Kits
RECOVERY GEAR & APPAREL
100-103
STICKERS & PRINT MEDIA
104-105
Trail Recovery Bag

Tow Strap/Tree Strap
Air Deflators
Grab Handles
Hats & Beanies
T-Shirts & Hoody
Stickers/Banners
Catalogs & Brochures
NOTES & WARRANTY
105
JOIN US ONLINE
Jk wrangler
2007 - Current
Thaler Design has developed a JK pick up conversion kit that is revolutionizing the Jeep market with its clean installation process, factory appearance,
and design functionality; features that can only be found in an ActionTruck. The JK Unlimited naturally lends itself to the Thaler Design conversion
because of its longer wheel base, heavy duty frame and removable top and doors. In the past it was necessary to cut panels, weld in floors and do
extensive body work, all the while trying to prevent leakage and maintain appearance. ActionTruck has designed a complete kit with simplicity of
installation and practicality in mind. The entire system is shipped in a single crate with everything you will need to convert your JK to the utility of a
Jeep pickup.
The conversion provides several benefits not found in previous conversion kits. The first being an installation process that is as simple as removing
your top, doors, and rear roll cage, and replacing them with the provided B-pillar support, tub, door panels and hard top. By using existing mounting
locations and hardware, installation can be accomplished at home or at your local 4x4 shop. Bolt on sport bar braces add aesthetics to the conversion,
but they also lend strength and support to the body and sport bar. Even the reinforced door replacement panels are mounted using existing hinge and
door latch locations. Ease of installation was a major requirement in the design of the ActionTruck and the goal was accomplished.
All fiberglass parts come with a flat black fine structured gel coat finish, with color matching paint as the only option requiring a visit to a body shop.
The ActionTruck conversion is truly a noninvasive procedure. The ActionTrucks one piece drop-in fiberglass bed is completely waterproof, and totally
eliminates one of the biggest concerns in previous conversion kits - water leaks. The hand laid fiberglass also provides a strong boxed in bed perfect
for anything you need to carry. Bed mounting points utilize factory hard top mounts for secure cargo tie down. The fiberglass composition of the
kit reduces the overall vehicle weight by 300 pounds and yet provides all the strength necessary to allow your Jeep to perform with a new feel and
function. You will immediately notice the lack of roof heat, road and wind noise with the new one piece fully lined double sealed removable top. The
rear lift window design allows it to pop open with a light push and provides perfect ventilation for those hot summer trail rides.
Storage is always a concern and every inch of potential cargo space is utilized in this unique design. Side service doors provide access to storage
space only available in an ActionTruck. The locking panels open to give secured access to storage inside both sides of the bed, as well as easy
access to the hard to reach area behind the seats. The doors can stay open in a horizontal position and can be used as a table for delicious snacks
and lunch while on the trail!
DEMAND QUALITY - GET THE TERAFLEX ADVANTAGE.
Jk actiontruck conversion kit

The ActionTruck by Thaler Design is a complete truck conversion kit that is
designed with simplicity and ease of installation. The unique bolt-on kit can be
installed in a day in your driveway with no expensive tools or equipment. The
one-piece hand laid fiberglass bed is designed to install easily over the existing
cargo area of the Jeep Unlimited. The hardtop features a hinged rear window
for rear cargo access, and a removable one-piece sun top for open air driving.
Sport bar braces bolt to factory sport bar tie-in points. Rear door cargo access
is retained with a door filler incorporating an integrated side access panel to gain
easy entry to the rear cabin cargo area. The ActionTruck by Thaler Design is truly
an understated truck conversion kit with factory styling and attention to detail.
Note: The ActionTruck conversion kit is designed for the 4 door JK Unlimited. The design
and function of the ActionTruck is primarily to enhance the aesthetic appearance of the Jeep.
No safety characteristics are expressed or implied and should not be relied upon to contain
or protect occupants in the event of an accident or falling objects. Never operate the Jeep in
excess of the vehicle manufacturers specifications. This kit requires cutting and removal of
the factory rear sport bar. A new two-piece hard top and sport bar reinforcement braces are
included with this kit, but are not rated to be used as a safety restraint or device. This kit is
designed as a permanent installation, but can be restored to factory-like condition with minimal
effort.
JK ActionTruck Conversion Kit
18616
$5999.99
Install Time: 15 hours
BOLT-ON COMPONENTS
By using existing mounting

locations, installation can
be accomplished at home.
Bolt on sport bar braces and
reinforced door replacement
panels are mounted using
existing hinge and door latch
locations. Ease of installation
is a defining characteristic.
SIDE CARGO DOORS
The locking panels open to

give secured access to storage
inside both sides of the bed, as
well as easy access to the hard
to reach area behind the seats.
The doors can stay open in a
horizontal position and can be
used as a table for delicious
snacks and lunch!
REMOVABLE SUN TOP
With a quad-latch clamping

system the light weight top
can easily be removed, but the
tops layered construction and
pre-installed noise and heat
barrier, provide a comfortable
quiet feel inside the cab that
can only be experienced in the
ActionTruck.
TO ORDER CALL 801-713-3314 OR ONLINE AT TERAFLEX.COM
FIBERGLASS BED
The hand laid fiberglass onepiece bed provides a strong

boxed-in bed perfect for
anything you need to carry.
The bed utilizes factory hard
top mount mounting points for
secure cargo tie down. Large
41.75 x 56.75 inside finished
cargo bed dimensions.
REAR LIFT WINDOW
The rear lift window allows

additional
cargo
access,
and incorporates a tapered
security latch, ensuring a tight
seal. Powerful window struts
lift and support the glass, even
while off road, making this a
unique feature in Jeep pickup
conversions.
rt
o
p
S
adS-ystem
u
Q
te sion
a
m
i
t
USl uspen
Quad-Sport street, desert, trail, & crawl. The advantage and benefit of the TeraFlex Elite LCG suspension system for JK Wranglers is apparent
the minute you put the pedal to the floor. With superior handling, responsive steering, ultimate off-road performance, and customizable suspension
geometry, this system is miles ahead of anything else out there. TeraFlex continues to dominate the off-road market, and the Elite LCG reinforces that
position. The Elite LCG Suspension can handle anything you can dish out.
The handling and performance of the Elite long flexarm system over any other kit long or short, on the market is simply amazing. The long upper
and lower flexarms work in tandem to provide synchronized suspension movement and articulation that does not bind or limit travel. The suspension
travel is maximized through correct control arm geometry that reduces the extreme control arm angles, an inherent problem with short arm lifts. This
correct geometry also eliminates most of the front-to-back movement of the axle as it cycles in its motion, keeping the wheel centered in the wheelwell through all suspension travel.
The new flexarm mounting points properly address critical handling areas of anti-squat on the rear, and anti-dive on the front. A factory style 4-link
suspension with trackbar provides the best handling and performance for on-road drivability and allows the JK to track tight through corners and at
highway speeds. The trackbars provide excellent lateral stiffness to keep the axle properly centered under the vehicle for the strongest suspension
configuration possible.
The low center of gravity philosophy has been implemented in this system to ensure that ground clearance and suspension ability has been maximized
while keeping the total center of gravity as low as possible for premium handling and control. The difference is immediate and the advantage is
TeraFlex.
SIMPLE BRACKETRY
The
CAD
designed
bracketry
has
been
specifically engineered to
provide maximum strength.
Streamlined mounting points
incorporate both upper and
lower mounts in one bracket
for simplified installation and
seamless factory styling.
FRAME BRACING
Under extreme articulation the

frame has a substantial amount
of flex. The frame brace
eliminates the flex and adds
superior stiffness to the front
steering system for noticeable
response at highway speeds,
and strength off-road.
4-LINK W/ TRACKBAR
Articulation with the LCG

systems 4-link with trackbar
is unmatched. The trackbar
when combined with the frame
brace eliminates unnecessary
frame flex, and front end
shimmy. The drivability with
the monster trackbar is
unparalleled.
REAR TRACKBAR KIT
Proper suspension geometry

addresses
roll
center,
trackbar angles and alignment
specifications.
The
rear
trackbar kit properly aligns
the rear suspension to return
to center and control sway at
speeds, and to work in unison
with the front suspension.
JK SPECIFIC JOINTS
All flexarms use exclusive

TeraFlex forged
housings
loaded with JK specific flexarm
joints. Angled shanks provide
maximum tire clearance for
tight turning. Complete length
adjustability allows for correct
driveline and caster angles
and alignment.
Jk 6 & 4 elite lcg Suspensions

JK 6 ELITE LCG LONG FLEXARM SUSPENSION SYSTEM
1257600
2 DOOR
JK 6 LA System w/ 9550 Shocks
JK 6 LA System - No Shocks
JK 6 LA System w/ SpeedBumps - No Shocks
1257602 $3983.99
1457602 $3713.99
1457692 $4689.99
4 DOOR
1257600 $3983.99
1457600 $3713.99
1257690 $4689.99
Install Time: 22 hours + 2 hours (SpeedBump) + .5 hour (reservoir shocks)
The TeraFlex JK 6 Elite LCG long flexarm system is the ultimate in both style and
performance. Long-term testing yielded intense, inclusive, detailed suspension
geometry engineering and development, to provide optimal handling and
performance. Some major suspension areas that were addressed include: Antidive for proper front braking, Anti-squat for proper power to wheels suspension
movement, and several improvements to the front and rear roll centers.
The Elite LCG features adjustable suspension tuning, and is accomplished through
fully adjustable upper and lower long flexarms that allow pinion, caster, anti-squat,
and tire position configurations to be modified.
The core of the Elite LCG long flexarm kit is found in the heavy duty bracketry
precision CNC cut and formed from steel plate with fully gusseted and reinforced
welds. The simple design is incorporated flawlessly with the frame and provides
OE streamlined styling. Simple, straight forward installation is handled with frame
locating holes in all bracketry prior to stitch-welding the brackets in their permanent
location. Lower flexarms feature 2 OD x .281 wall DOM with fully welded heavy
duty bushing eyelets for superior rigidity and durability against the rocks.
This kit is designed to fit up to 38 tires (aftermarket wheels with 4.5 backspacing
or less is required).
Note: Driveline modifications are required on all JK Wranglers & Unlimiteds with this
suspension system. 2012+ JKs require exhaust spacers (#2610000) or other exhaust
modification for proper driveline clearance.
Note: Driveline modifications are required on all JK Wranglers & Unlimiteds with this
suspension system. 2012+ JKs require exhaust spacers (#2610000) or other exhaust
1257400
2 DOOR
1257402 $3283.99
1457402 $3014.99
1457492 $3989.99
4 DOOR
1257400 $3283.99
1457400 $3014.99
1257490 $3989.99
The TeraFlex JK 4 Elite LCG long flexarm system is a perfect balance of low
center of gravity and ground clearance, while providing enormous performance
gains. Major suspension areas that are addressed include: Anti-dive for proper
front braking, Anti-squat for proper power to wheels suspension movement, and
several improvements to the front and rear roll centers.
steel plate with fully gusseted bracketry and 2 OD x .281 wall DOM flexarms
provide the basis for one extremely durable suspension system.
This kit is designed to fit up to 37 tires (aftermarket wheels with 4.5 backspacing
or less is required).
Jk 3 & 2.5 elite lcg

1257300
2 DOOR
The TeraFlex 3 Elite LCG long flexarm Kit for the JK Wrangler is the perfect
solution for aggressive trail users looking for the most advanced Long flexarm
system available with a lift height that keeps the center of gravity as low as
possible, while giving you virtually the same performance gains as the 4 or 6
systems.
This suspension system is designed to fit up to 35 tires (aftermarket wheels with
4.5 backspacing or less is required).
1257302 $3225.99
1457302 $2956.99
1257392 $3931.99
4 DOOR
1257300 $3225.99
1457300 $2956.99
1257390 $3931.99
Note: Driveline modifications are recommended with this suspension system. 2012+ JKs
require exhaust spacers (#2610000) or other exhaust modification for proper driveline
clearance.
JK 2.5 ELITE LCG LONG FLEXARM SUSPENSION SYSTEM
clearance.
1257200
JK ELITE LCG LONG FLEXARM UPGRADE KIT

2 DOOR
JK 2.5 LA System w/ 9550 Shocks
JK 2.5 LA System - No Shocks
JK 2.5 LA System w/ SpeedBumps - No Shocks
1257202 $3198.99
1457202 $2929.99
1257292 $3480.99
4 DOOR
JK 2.5 LA System w/ 9550 Shocks
JK 2.5 LA System - No Shocks
JK 2.5 LA System w/ SpeedBumps - No Shocks
1257200 $3198.99
1457200 $2929.99
1257290 $3480.99

JK Long Flexarm - Arms Only (4 - 6 Lift)
JK Long Flexarm - Brackets Only (2.5 - 6 Lift)
JK Long Flexarm Kit - Arms & Brackets (4 - 6 Lift)
JK Long Flexarm - Arms Only (2.5 - 3 Lift)
JK Long Flexarm Kit - Arms & Brackets (2.5 - 3 Lift)
1457000
1957000
1955000
1457020
1955020
$1602.99
$576.99
$2176.99
$1602.99
$2176.99
Jk ELITE lcg prerunner

JK ELITE LCG PRERUNNER SUSPENSION SYSTEM
The TeraFlex JK Elite LCG prerunner system combines all of our top-of-theline components into a purpose-built speed system. The prerunner system is
designed to minimize unnecessary rotational mass, and maximize complete wheel
travel. The LCG prerunner specifically focuses on the speed aspect of off road
performance, and by keeping tire size to 35 the JK is able to quickly accelerate.
SUSPENSION SYSTEM
FEATURES & BENEFITS
Designed for wide-open inspired driving
Maximum 35 tire
Designed for Tera44 or OEM axle housings
HD limiting straps prevent damage to suspension
Extensive gusseting and brackets beef up critically weak areas and
prevent potential damage
SpeedBump bumpstops provide progressive compression during high
speed suspension movement
Fox Racing Shocks are specifically engineered, designed, and valved
to work in conjunction with SpeedBump bumpstops
Coil spring retainers prevent the springs from unseating during full
suspension extension
FOX Racing long-travel shocks feature a unique shock body design that provides
a longer stroke by using a remote reservoir for the IFP (internal floating piston)
while allowing for maximum compression, and are race-tuned and valved to work
in conjunction with the SpeedBumps for all out performance. Suspension limiting
straps prevent any potential damage to drivetrain or suspension by maximizing
down travel safely. Additional details are addressed such as critical gusseting,
bracing and other bracketry to beef up areas that are prone to damage at high
speed.
Note: 2012+ JKs require exhaust spacers (#2610000) or other exhaust modification for proper
driveline clearance.
2 DOOR
JK Prerunner LA System - No Shocks
1145042 $4080.99
4 DOOR
JK Prerunner LA System - No Shocks
1145044 $4080.99
FOX RACING LONG TRAVEL SHOCKS

JK FOX Shocks w/ Remote Reservoir - All 4
UPGRADE YOUR LIFT TO A
$921.99
Upgrading is easy! Add all of the components below to take your basic lift to the next level! The prerunner
components work with both short and long arm suspensions.
Note: Prerunner components are engineered to work best with TeraFlex components, but will enhance
any Jeep lift.
JK PRERUNNER COMPONENT KIT
JK SPEEDBUMP BUMPSTOPS
1958251
The prerunner component kit will give you all of the additional components needed
to take your basic lifted Jeep and prep it for prerunning conditions. This kit includes
front and rear coil spring retainers, flexarm cam bolt washers, front SpeedBump
jounce tube braces, front and rear suspension limit straps.
Note: The limit straps are designed to be used with the 3 TeraFlex Fox or Elka tuned shock
absorbers. Using a different shock and/or length is not advised.
JK prerunner Component Kit
1980200
4957000
$188.99
1958260
The TeraFlex prerunner SpeedBump Bumpstop kit features 3 stroke bumpstops

at all four corners for maximum suspension control.
A bumpstop canister is welded into the frame to mount the rear bumpstop.
Note: Rear frame modification is required to fit the rear SpeedBump/canister
JK front prerunner SpeedBump system kit

JK rear prerunner SpeedBump system kit
1958251
1958260
$367.99
$398.99
The TeraFlex Outback Overland suspension system was designed from the ground up for a dedicated vehicle capable of supporting
sustained self-reliant travel over extreme terrain. Legendary tracks such as the Canning Stock Route in Australia, or the Silk Road in China
prove to be some of the toughest challenges a vehicle will ever face.
This approach required us to evaluate every component and verify the performance factor for each item. We found that the majority of our
products are by virtue of their original design perfectly suited for dedicated overland applications.
We modified some components to make them more suited for long stretches of washboard roads with no maintenance required. Some
of these changes are found in the flexarm joints - we opted to use factory style rubber bushings at both ends of the flexarm. This delivers
maximum vibration damping. The allowable flex provided by rubber bushings provides full articulation, utilizing maximum shock travel
available.
Special consideration and attention was spent on correct spring rate tuning and development. Dedicated overland travel requires the use
of specific spring rates suited to heavy loads and continuous mechanical resonance that react differently than standard coil spring rates.
10
Jk Outback overland suspension

JK OUTBACK SUSPENSION SYSTEM
2 DOOR
JK 3 Outback System - No Shocks
1167202 $2305.99
4 DOOR
JK 3 Outback System - No Shocks
1167204 $2305.99
Install Time: 8-10 hours
FOX RACING LONG TRAVEL SHOCKS

JK FOX Shocks w/ Remote Reservoir - All 4
1980200
$921.99
The TeraFlex outback suspension system is designed as a complete suspension

system exclusively for expedition style overland travel. This system incorporates
custom load enhanced heavy-duty spring rate coils to meet the performance
demands of a fully loaded Jeep and maintain the lift height.
Suspension limiting straps prevent any potential damage to drivetrain or
suspension by maximizing down travel safely. Additional details are addressed
such as critical gusseting, bracing and other bracketry to beef up areas that are
prone to damage and fatigue typically experienced with extended overland trips.
When combined with Fox long travel shocks, superior performance is achieved.
Note: Driveline modifications are recommended with this suspension system. Because of the
load enhanced spring rate, this kit is designed specifically for heavy loaded Jeeps. A firmer
ride will be experienced with an empty payload.
ADD THESE RECOMMENDED COMPONENTS
to get your jeep

100% outback capable
JK FRONT TERA30 REPLACEMENT HOUSING

JK HD Front Tera30 Replacement Housing
From
$1843.99

JK HD Front Tera44 Replacement Housing
From
$2100.99
Check out Page 82 for complete JK HD axle replacement options!
JK HD HINGED CARRIER & SPARE TIRE MOUNTING KIT

Complete JK HD Hinged Carrier & Adjustable Spare Tire Mounting Kit

4838150 $742.99
JK DUAL RATE FORGED S/T SWAYBAR

JK 0-3 Front Dual Rate Forged S/T Swaybar
FACTORY POINTS
The
Outback
suspension
system retains the factory
suspension mounting points to
maintain ease of install with no
cutting or welding required. In
addition, retaining the factory
suspension points complies
with most worldwide state and
country regulations.
HD SPRING RATE
The Outback system features

load enhanced heavy-duty
spring rate coils to meet the
performance demands of a
fully loaded Jeep and further
reduces body lean due to
unbalanced cargo loading.
SPEEDBUMPS
SpeedBump
bumpstops
are essential for proper
suspension control, especially
with heavy loads common
with overland travel. The
SpeedBump
progressively
controls compression and
rebound without the pogo
effect.
LIMIT STRAPS
Limit straps prevent any

potential damage to drivetrain
or suspension by maximizing
down travel safely
and
are essential for protection
of shock absorbers and
other
critical
suspension
components.
1753720
$829.99
MAINTENANCE FREE
Maintenance
free
clevite
rubber
bushings
provide
superior vibration damping .
Complete length adjustability
allows for correct driveline and
caster angles and alignment.
11
Jk 4 lift kits
JK 4 SUSPENSION SYSTEM WITH 8 FLEXARMS
The TeraFlex JK 4 suspension lift kit delivers everything that you need to conquer
the most extreme trails and conditions. Drivability and performance are the most
important factors that are engineered and built into every TeraFlex lift kit. Properly
developed suspension geometry, roll center, and load tuning ensure that all factory
stability controls remain functional and within the parameters that Jeep originally
engineered into the vehicle. TeraFlex kits drive straight and will crawl anything,
getting you there and back!
This system includes 4 lift coil springs, all lower and upper adjustable flexarms,
9550 VSS shocks, front adjustable trackbar, front swaybar disconnects, rear
swaybar links, rear trackbar bracket, bumpstops and all necessary hardware.
This kit will allow you to run up to a 37 tire (aftermarket wheels with 4.5
backspacing or less are required).
Fits all JK Wrangler models including Rubicon and Unlimited.
Note: Driveline modifications are highly recommended with this suspension system. 2012+
JKs require exhaust spacers (#2610000) or other exhaust modification for proper driveline
clearance.
1451400
2 DOOR
JK 4 8 Flexarm System w/ 9550 Shocks
JK 4 8 Flexarm System - No Shocks
1451402 $2728.99
1156402 $2461.99
4 DOOR
1451400 $2728.99
1156400 $2461.99
JK 4 LIFT KIT
The TeraFlex JK 4 suspension lift kit delivers everything that you need to conquer
the most extreme trails and conditions. Drivability and performance are the most
important factors that are engineered and built into every TeraFlex lift kit. Properly
developed suspension geometry, roll center, and load tuning ensure that all factory
stability controls remain functional and within the parameters that Jeep originally
engineered into the vehicle. TeraFlex kits drive straight and will crawl anything,
getting you there and back!
This system includes a 4 lift kit, 9550 VSS shock absorbers, front adjustable
trackbar, front swaybar disconnects, rear swaybar links, rear trackbar bracket,
bumpstops and all necessary hardware.
backspacing or less are required).
Fits all JK Wrangler models including Rubicon and Unlimited.
Note: This kit must be used with adjustable control arms to establish correct caster and
pinion angle during re-alignment. Driveline modifications are highly recommended with
this suspension system. 2012+ JKs require exhaust spacers (#2610000) or other exhaust
2 DOOR
JK 4 Lift Kit w/ 9550 Shocks
JK 4 Lift Kit - No Shocks
JK 4 Base Lift Kit - No Trackbar, No Shocks
1251402 $1394.99
1151422 $1126.99
1151421 $866.99
4 DOOR
JK 4 Lift Kit - No Shocks
1251400 $1394.99
1151400 $1126.99
1151401 $866.99
1251400
12
Jk 3 lift kits
1451333
2 DOOR
JK 3 8 Flexarm System w/ Trackbar & 9550 Shocks
JK 3 8 Flexarm System w/ Trackbar - No Shocks
1451233
1451302
1156233
1156302
$2716.99
$2456.99
$2472.99
$2188.99
1451333
1451300
1156333
1156300
$2716.99
$2456.99
$2472.99
$2188.99
4 DOOR
The TeraFlex JK 3 suspension lift kit delivers everything that you need to tackle
some serious trails. Drivability and performance are the most important factors that
are engineered and built into every TeraFlex lift kit. Properly developed suspension
geometry, roll center, and load tuning ensure that all factory stability controls
remain functional and within the parameters that Jeep originally engineered into
the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there
and back! This system includes 3 lift coil springs, 9550 VSS shock absorbers, all
lower and upper adjustable flexarms, front swaybar disconnects, rear swaybar
links, rear trackbar bracket, bumpstops and all necessary hardware. This kit will
allow you to run up to a 35 tire (aftermarket wheels with 4.5 backspacing or less
are required). Fits all JK Wrangler models including Rubicon and Unlimited.
clearance.
JK 3 LIFT KIT
1256220
1251220
2 DOOR
2 DOOR

JK 3 4 Flexarm System w/Trackbar - No Shocks
1256222
1256202
1156222
1456202
$2028.99
$1784.99
$1759.99
$1515.99
JK 3 Lift Kit w/ Trackbar & 9550 Shocks

JK 3 Lift Kit w/ Trackbar - No Shocks
1256220
1256200
1156220
1456200
$2028.99
$1784.99
$1759.99
$1515.99
JK 3 Lift Kit w/ Trackbar & 9550 Shocks

JK 3 Lift Kit w/ Trackbar - No Shocks
1251222 $1376.99
1251202 $1133.99
1151222 $1108.99
1151202 $865.99
4 DOOR
4 DOOR
1251220 $1376.99
1251200 $1133.99
1151220 $1108.99
1151200 $865.99

backspacing or less are required). Fits all JK Wrangler models including Rubicon
and Unlimited.
backspacing or less are required). Fits all JK Wrangler models including Rubicon
and Unlimited.
clearance.
Note: This kit must be used with adjustable control arms to establish correct caster and
pinion angle during re-alignment. Driveline modifications are highly recommended with
this suspension system. 2012+ JKs require exhaust spacers (#2610000) or other exhaust
13
Jk 2.5 lift kits

JK 2.5 LIFT KIT
1251002 / 1251000
The JK 2.5 lift kit is an ultra simple performance oriented lift kit, and includes a
heavy duty axle mounted trackbar bracket.
The kit is available in three configurations for your desired performance level.
The basic lift includes all of the essential items needed (some form of shock
modification will be required- either adapters or new longer shocks).
backspacing or less are required). Fits all JK Wranglers including Rubicon and
Unlimited.
Note: 2012+ JKs may require exhaust spacers (#2610000) or other exhaust modification for
proper driveline clearance if front extended shock length is greater than 24.5.
2 DOOR
JK 2.5 Lift Kit w/ 9550 Shocks
JK 2.5 Lift Kit w/ Shock Extensions - No Shocks
JK 2.5 Lift Kit - No Shocks
1251002
1352002
1351002
$787.99
$537.99
$516.99
1251000
1352000
1351000
$787.99
$537.99
$516.99
1352002 / 1352000
4 DOOR
JK 2.5 Lift Kit w/ 9550 Shocks
JK 2.5 Lift Kit w/ Shock Extensions - No Shocks
JK 2.5 Lift Kit - No Shocks
1351002 / 1351000
JK 2.5 PERFORMANCE BUDGET BOOST
1255200
The TeraFlex JK 2.5 budget boost is the most economical lift for the JK Wrangler.
The budget boost is designed for JK owners who wish to lift their vehicle without
any additional modifications. The budget boost will increase ground clearance and
create room for larger tires. Several innovative features of the TeraFlex budget
boost are found in our exclusive spring retention spacers that do not allow the
spring to drop out during extreme articulation.
The budget boost lift kit will allow you to run up to a 35 tire (aftermarket wheels
with 4.5 backspacing or less are required).
Note: 2012+ JKs may require exhaust spacers (#2610000) or other exhaust modification for
proper driveline clearance if front extended shock length is greater than 24.5.
1355210
JK 2.5 Budget Boost w/ 9550 Shocks

1255200
JK 2.5 Budget Boost w/ Shock Extension - No Shocks 1355210
JK 2.5 Budget Boost - No Shocks
1355200
1355200
14
$549.99
$365.99
$278.99
Jk leveling kits
JK 1.5 SPRING LEVELING KIT
2 DOOR
JK 1.5 Spring Leveling Kit
1351502
$419.99
1351500
$419.99
4 DOOR
JK 1.5 Spring Leveling Kit
The TeraFlex JK leveling kit gives your Jeep a more aggressive stance and some
extra attitude. This kit is perfect for leveling your JK, and adding just a touch of
lift to compensate for aftermarket bumpers or weekend cargo. The performance
enhancements of the linear coil springs maintain highway handling characteristics
and allow for increased off-road handling and articulation. The leveling kit includes
a 2 lift front spring, and a 1 lift rear spring with longer front swaybar links.
Fits all JK Wranglers including Rubicon and Unlimited.
Note: This kit does not include extended bumpstops. If larger tires are used some rubbing will
occur during suspension compression.
JK 1.5 LEVELING KIT
The TeraFlex JK leveling kit gives your Jeep a more aggressive stance and some
extra attitude. This kit is perfect for leveling your JK, and adding just a touch of
lift to compensate for aftermarket bumpers or weekend cargo. This leveling kit
includes a 2 front spacer, and a 1 rear spacer with longer front swaybar links.
Note: This kit does not include extended bumpstops. If larger tires are used some rubbing will
occur during suspension compression.
JK 1.5 Leveling Kit
1155200
$170.99
JK SPRING SPACER
JK 1.25 BODY LIFT KIT
1953100
1954105
The TeraFlex 1.25 body lift kit is perfect for the budget-minded enthusiast looking
for a simple lift to run 33 tires, or it can be combined with a suspension lift kit
to gain additional clearance. The body lift spacers are molded from UHMW
polyethylene for premium longevity and corrosion resistance. Includes all needed
hardware, including new large washers.
This kit was designed with ease of install in mind; no grinding, cutting, or repurposing of factory hardware is needed. Grill removal is not required.
Note: This kit is designed for Automatic transmissions. Manual transmission equipped JKs will
require shifter boot trimming for proper installation.
JK 1.25 Body Lift Kit
4152100
$183.99
1953075
1954100
TeraFlex has the perfect solution to level out a loaded vehicle. These spacers are
designed to work in stock configuration, or with a lifted vehicle.
The spacers are available in 1/2, 1 or 2 lift increments depending on your needs.
The rear spacer also incorporates our industry exclusive spring retainer and guide
that helps to realign the spring to its proper location during extreme articulation
without fear of the spring falling out.
Fits all JK Wranglers including Rubicon and Unlimited. Sold individually.
JK 1/2 Front Spring Spacer - Each
JK 1 Front Spring Spacer - Each
JK 2.5 Front Spring Spacer - Each
1953100
1953075
1953200
$12.99
$16.99
$29.99
JK 1/2 Rear Spring Spacer - Each

JK 1 Rear Spring Spacer - Each
JK 2 Rear Spring Spacer - Each
JK 2.5 Rear Spring Spacer - Each
1954105
1954100
1954200
1954205
$24.99
$32.99
$67.99
$70.99
15
JK COIL SPRINGS
JK 1.5 COIL SPRINGS

2 DOOR
JK 1.5 Front Springs - Pair

JK 1.5 Rear Springs - Pair
4 DOOR

1853022
1854022
$203.99
$203.99
1853052
1854052
$203.99
$203.99
1853052
1854052
$203.99
$203.99
1853102
1854102
$203.99
$203.99
1853102
1854102
$203.99
$203.99
1853202
1854202
$203.99
$203.99
1853202
1854202
$203.99
$203.99
1853402
1854402
$203.99
$203.99
1853402
1854402
$203.99
$203.99
1853602
1854602
$203.99
$203.99
JK 2.5 COIL SPRINGS

2 DOOR

4 DOOR
JK 3 COIL SPRINGS
2 DOOR
JK 3 Front Springs - Pair
JK 3 Rear Springs - Pair
4 DOOR
JK 4 COIL SPRINGS
2 DOOR

4 DOOR
JK 6 COIL SPRINGS
2 DOOR

4 DOOR
Note: Advertised lift heights do not imply actual final lift height. Use these lift height
descriptions as the average lift height that may be achieved between the front & rear of the
vehicle. Other variables will also alter the final actual lift height such as a winch, aftermarket
bumpers, and full-size spare tire, loaded cargo weight, etc.
16
Jk lift application chart
2.5"
35"
1355200
Spacer Lift
JK 2 & 4 Door
2.5"
35"
1355210
Spacer Lift
JK 2 & 4 Door
35"
1255200
Spacer Lift
JK 2 & 4 Door
X
X
Extensions
9550
2.5"
35"
1251002
Lift Kit
JK 2 Door
9550
2.5"
35"
1352002
Lift Kit
JK 2 Door
Extensions
Extensions
2.5"
35"
1351002
Lift Kit
JK 2 Door
2.5"
35"
1351000
Lift Kit
JK 4 Door
2.5"
35"
1352000
Lift Kit
JK 4 Door
2.5"
35"
1251000
Lift Kit
JK 4 Door
9550
35"
1257202
Elite LCG System
JK 2 Door
9550
2.5"
35"
Long
9550
Long
Long
Long
1457202
Elite LCG System
JK 2 Door
2.5"
35"
1257292
Elite LCG System
JK 2 Door
35"
1257200
Elite LCG System
JK 4 Door
2.5"
35"
1457200
Elite LCG System
JK 4 Door
2.5"
35"
1257290
Elite LCG System
35"
1251202
Base Lift Kit
JK 2 Door
35"
1151202
Base Lift Kit
JK 2 Door
3"
35"
1251200
Base Lift Kit
JK 4 Door
3"
35"
1151200
Base Lift Kit
JK 4 Door
3"
35"
1251222
Lift Kit
JK 2 Door
3"
35"
1151222
Lift Kit
JK 2 Door
3"
35"
1251220
Lift Kit
JK 4 Door
3"
35"
1151220
Lift Kit
JK 4 Door
3"
35"
1256222
4 Arm Lift System
JK 2 Door
3"
35"
1156222
4 Arm Lift System
9550
9550
35"
1256220
4 Arm Lift System
JK 4 Door
35"
1156220
4 Arm Lift System
JK 4 Door
3"
35"
1256202
4 Arm Lift System
JK 2 Door
3"
35"
1256203
4 Arm Lift System
JK 2 Door
3"
35"
1256200
4 Arm Lift System
JK 4 Door
3"
35"
1456202
4 Arm Lift System
JK 2 Door
Long
X
X
9550
X
X
9550
9550
JK 2 Door
3"
3"
Long
JK 4 Door
3"
3"
2.5"
2.5"
X
9550
9550
9550
Short
Short
Short
Short
X
X
Short
Short
Short
Short
3"
35"
1456200
4 Arm Lift System
JK 4 Door
Short
35"
1256201
4 Arm Lift System
JK 4 Door
Short
3"
35"
1451302
8 Arm Lift System
JK 2 Door
3"
35"
1156302
8 Arm Lift System
JK 2 Door
35"
1451300
8 Arm Lift System
JK 4 Door
3"
35"
1156300
8 Arm Lift System
35"
1451233
8 Arm Lift System
JK 2 Door
35"
1156233
8 Arm Lift System
JK 2 Door
3"
35"
1451333
8 Arm Lift System
JK 4 Door
3"
35"
1156333
8 Arm Lift System
9550
X
X
Short
9550
Short
JK 4 Door
3"
3"
9550
9550
JK 4 Door
Short
Short
Short
Short
Short
Short
3"
35"
1167202
Outback Overland
JK 2 Door
3"
35"
1167204
Outback Overland
JK 4 Door
3"
35"
1257302
Elite LCG System
JK 2 Door
3"
35"
1457302
Elite LCG System
JK 2 Door
1257392
Elite LCG System
JK 2 Door
3"
35"
1257300
Elite LCG System
JK 4 Door
3"
3"
35"
35"
1457300
Elite LCG System
JK 4 Door
9550
9550
3"
35"
1257390
Elite LCG System
JK 4 Door
3"
35"
1145042
Elite LCG PreRunner
JK 2 Door
Must use FOX
JK 4 Door
Must use FOX
3"
35"
1145044
Elite LCG PreRunner
Long
Long
Long
Long
Long
Long
Long
Long
4"
37"
1151421
Base Lift Kit
JK 2 Door
37"
1151401
Base Lift Kit
JK 4 Door
4"
37"
1251402
Lift Kit
JK 2 Door
4"
37"
1151422
Lift Kit
JK 2 Door
37"
1251400
Lift Kit
JK 4 Door
4"
37"
1151400
Lift Kit
JK 4 Door
4"
37"
1451402
8 Arm Lift System
JK 2 Door
4"
37"
1156402
8 Arm Lift System
37"
1451400
8 Arm Lift System
JK 4 Door
37"
1156400
8 Arm Lift System
JK 4 Door
4"
37"
1257402
Elite LCG System
JK 2 Door
4"
37"
1457402
Elite LCG System
JK 2 Door
4"
37"
1457492
Elite LCG System
JK 2 Door
4"
37"
1257400
Elite LCG System
JK 4 Door
4"
37"
1457400
Elite LCG System
JK 4 Door
4"
37"
1257490
Elite LCG System
JK 4 Door
6"
38"
1257602
Elite LCG System
JK 2 Door
6"
38"
1457602
Elite LCG System
9550
X
X
9550
9550
JK 2 Door
4"
4"
X
9550
9550
9550
38"
1457692
Elite LCG System
JK 2 Door
38"
1257600
Elite LCG System
JK 4 Door
Short
Short
Short
Short
Long
Long
Long
Long
Long
Long
9550
Long
Long
9550
Long
JK 2 Door
6"
6"
Long
X
X
4"
4"
3"
3"
SpeedBump
Bumpstops
Rear Bumpstop
Extensions
Front Bumptsop
Extensions
Rear Brake Lines
Rear Brake Line

Extensions
Front Brake Lines
Rear Swaybar
Links
Front Sway Bar

Disconnects
Rear Trackbar
Rear Trackbar
Bracket
Front Trackbar
8 FlexArms
JK 4 Door
4 FlexArms
JK 2 & 4 Door
Leveling Spring Lift
Lift Spacers
Leveling Spacer Lift
1351500
Springs
Part #
1155200
33"
Shocks
Max Tire Size

33"
1.5"
Vehicle Fit
Lift Height
1.5"
2.5"
JK Wrangler 2007-Current
Suspension Lift
Type
JK Wrangler TeraFlex Lift Kit & Suspension System Application Chart
6"
38"
1457600
Elite LCG System
JK 4 Door
Long
6"
38"
1257690
Elite LCG System
JK 4 Door
Long
Please note that not all items are included in this application chart. This is not an inclusive list of all kit items. Many items are omitted.
17
jk suspension components
JK FRONT SUSPENSION BUMPSTOP
JK REAR SUSPENSION BUMPSTOP
1954600
1953800
1467125
1954802
1467250
1954700
TeraFlex bumpstop extensions are designed to retain the factory microcellular

bumpstop to progressively absorb impact. The upper bumpstop extension has
been designed to pop-in to the factory bumpstop tower for a simple no-bolts
needed installation. Lower bumpstops are a simple bolt-in installation.
TeraFlex bumpstop extensions are designed to retain the factory microcellular

bumpstop to progressively absorb impact. The upper bumpstop extension has
been designed to pop-in to the factory bumpstop tower for a simple no-bolts
needed installation. Lower bumpstops are a simple bolt-in installation.
JK Front Upper Bumpstop 2.75 Tall - Pair

1953800
JK 4 & 6 Front Lower Bumpstop 2.25 Tall - Pair
1910234
JK SpeedBump Front Lower Bumpstop 1.25 Tall - Pair 1467125
JK 4-6 Rear Upper Bumpstop 2 Tall - Pair

1954802
JK Rear Lower Bumpstop 2.75 Tall - Pair
1954700
JK SpeedBump Rear Upper Strike Pad - Pair
1992000
JK SpeedBump Rear Lower Strike Pad 0.75 Tall - Pair 1954600
$41.99
$30.99
$30.99
$48.99
Install Time: 1 hour
$36.99
$44.99
$25.99
$26.99
JK 2012+ EXHAUST SPACER KIT

JK COIL SPRING RETAINER KIT
4951400
4951300
Exhaust spacers are needed for all 2012+ model JK Wranglers using a lift kit with
2.5 or more lift. The spacers are installed between the driver and passenger head
pipe flanges and the flanges of the cross pipe, which move the exhaust cross pipe
rearward. This prevents contact between the front driveline and the exhaust cross
pipe during suspension down travel. Bolt on installation. For 2012+ JK Wranglers.
JK 2012+ Exhaust Spacer Kit
2610000
$50.99
Spring retainers are essential during rapid suspension cycling to prevent the
spring from unloading and rotating or shifting. These retainers are precision cut
and zinc plated for durability.
JK Front Lower Spring Retainer Kit
JK Rear Upper Spring Retainer Kit
JK Spring Retainer Kit (Front Lower & Rear Upper)
JK Rear Lower Spring Retainer
4951300
4951400
4951000
4954300
$9.99
$16.99
$26.99
$18.99
JK PRERUNNER AXLE LIMITING STRAP KIT
ONLINE ORDERING MADE EASY
Check out our website
4853100
Suspension limiting straps are the best way to limit suspension travel and prevent
premature drivetrain failure. These limiting straps are constructed with double
looped, high-strength webbing. Heat treated 4130 mounting tabs feature a
reinforced buckle to prevent cutting the webbing.
These limit straps are designed to work with TeraFlex Tuned Fox racing shocks.
Bolt on installation, some drilling required. Sold in pairs.
JK 15.125 Front Limiting Strap Kit - Pair
JK 13.5 Rear Limiting Strap Kit - Pair
JK Limiting Strap Kit - All 4
4853155
4854145
4853100
$56.99
$56.99
$111.99
Our redesigned website includes

quicker loading, easier navigation,
improved relevant search results,
and connections to our highly
qualified dealer network, or the
ability to purchase products directly.
TeraFlex.com is accessible from any
web-enabled Desktop computer,
tablet, mobile device, or smartphone.
We hope that you like the results!
18
Jk InTeRIOR Components
JK THIRD ROW SEAT BRACKET KIT
SMART DOOR CHECK STRAP KIT
4130405
The third row seat bracket kit allows JK Unlimited users to add a third row seat for
increased passenger capacity. Simply use the rear seat from 2 door JK with seat
belts (not included), bolt in the bracket kit, and you are on your way. The bracket
kit is a simple bolt-in installation. It retains the factory fold-and-tumble features.
Note: This is a bracket kit only and does not include the seat, seatbelts, or other
items. Requires cutting of the factory carpet for bracket installation.
JK Third Row Seat Bracket Kit
4934200
$293.99
DIGITAL INCLINOMETER TRAIL SCALE KIT
JK Front Smart Door Check Strap Kit - Pair

JK Rear Smart Door Check Strap Kit - Pair
JK 4Door Smart Door Check Strap Kit - All 4
4130305
4130205
4130405
$149.99
$138.99
$289.99
JK MP TAILGATE TABLE
Instantly displays roll and pitch of Jeep

LED display for high visibility in all lighting conditions
Audible Alarm (can be customized, and turned on/off)
Customizable roll and pitch limit settings
Hardwired for instant on when vehicle is started.
Simple installation
Easy set-up and operation
Attractive OEM finish to complement any Jeep interior
Intended for low-speed off-road use only
1 Year warranty
4804180
The TeraFlex trail scale inclinometer helps keep your Jeep rubber-side down by
alerting you of the roll and pitch angles of your Jeep. Visual indicators include a
color gradient light bar as well as a digital numeric display. A customized audible
alarm can also be turned on or off, to alert the driver when a dangerous roll or pitch
angle is approached.
Digital Inclinometer Trail Scale Kit
Are you tired of your JK doors not staying open, or slamming shut? The smart door
from Star Fabricating gives you the solution that should have come direct from
the factory! The smooth opening function includes 3 firm stopping positions and
allows the front door to extend open further than with the factory straps. The smart
door quickly disconnects for easy door removal with a simple barrel nut. Bolt-on
installation, drilling required. 2 Door & 4 Door kits available. Sold in pairs.
4800550
The TeraFlex MP (multi-purpose) tailgate table was co-developed with Vector Off
Road and is designed specifically for the JK. The large 23.5w x 12d table is
designed to provide maximum use while on the trail, and folds vertical when not
in use. The MP table is constructed from lightweight aluminum with stainless steel
hardware and is rated for 75 lbs. of evenly distributed load capacity. The table
also includes a polyethylene cutting board, trash bag hooks, and a bottle opener.
Multiple slots and holes allow for attaching accessories to the underside of the
table.
JK MP Tailgate Table w/ Cutting Board
JK MP Tailgate Table - No Cutting Board
JK MP Tailgate Table Cutting Board w/ Hardware
JK GRAB HANDLE KIT
$224.99
$198.99
$24.99
Install Time: 1.5 hours
$183.99
4804180
4804181
4804182
JK SHOCK EXTENSION KIT
1553800
1554800
Just ask a passenger, when the going gets rough, what do you hold on to?? These
grab handles mount easily to your roll cage and give both the driver and passenger
something a bit more secure to grab on to.
These shock extensions allow a mildly lifted JK (2.5 or less) to retain the factory
shock absorbers, and have proper extended and collapsed shock lengths for
handling and performance.
JK Front Grab Handle Kit - Pair

JK Rear Grab Handle Kit - Pair
JK Front Upper Shock Extension Kit - Pair

JK Rear Upper Shock Extension Kit - Pair
4830301
4830302
$44.99
$47.99
1553800
1554800
$33.99
$52.99
19
Jk shock application chart

A
Extended Length
C
Compressed Length
B
Travel
D
Unloaded Bushing Height
Stem-Loop Shock
Dimension
E
Extended Length
G
Compressed Length
F
Travel
Loop-Loop Shock
Dimension
Shock Application Information
Front Part Number Rear Part Number
JK
Wrangler
2007Current
Vehicle
Lift
Shock
Manufacture
A
Extended
Length
(in)
Front Stem-Loop
B
Travel
(in)
C
D
Compressed Unloaded
Bushing
Length
(in)
Height (in)
Rear Loop-Loop
E
Extended
Length
(in)
F
Travel
(in)
G
Compressed
Length
(in)
15.630
1553100
1554100
JK with 2.5" of Lift
TeraFlex
24.500
9.090
15.410
0.750
24.990
9.360
1460254
1400254
JK with 2.5"-4" of Lift
ELKA
26.300
10.790
15.510
0.850
27.640
11.300
16.340
1982820
1982819
JK with 2.5"-4" of Lift
FOX
26.000
10.500
15.500
0.696
27.650
11.200
16.450
1553200
1554200
JK with 3-4"of Lift
1460046
1400046
JK with 5"-6"Lift
1982865
1982864
JK with 5"-6" of Lift
1553400
1554400
JK with 6"+ of Lift
TeraFlex
26.880
10.380
16.500
0.750
28.090
10.840
17.250
ELKA
29.880
12.360
17.520
0.850
29.960
12.090
17.870
FOX
29.900
12.400
17.500
0.696
29.950
12.100
17.850
TeraFlex
30.920
12.370
18.550
0.750
32.090
12.840
19.250
JK FOX RACING SHOCKS STEERING STABILIZER
JK FOX RACING SHOCKS ATS STEERING STABILIZER
The TeraFlex tuned FOX racing shocks steering stabilizer features an aircraftgrade 6061-T6 heat treated aluminum shock body with impact cold forged
body construction. The internal floating piston provides controlled turning with a
responsive feel. Heat treated and hard chrome plated 5/8 alloy steel shaft provide
long lasting performance.
JK Fox Shocks Steering Stabilizer
980986
$153.99
Install Time: .5 hour
JK 9550 VSS STEERING STABILIZER
The FOX performance series adjustable through shaft (ATS) steering stabilizer
offers unrivaled steering control and a striking high tech appearance. The
technologically advanced design cancels unwanted steering forces in both
directions, taking the place of two conventional opposing stabilizers. It will also
respond to your input with 24 clicks of external adjustment to fine tune the feel. The
integrated reservoir allows for additional fluid capacity and improves cooling during
extreme use. Also included is FOXs relocating hardware that moves the steering
stabilizer up and out of the way. The ATS represents a revolutionary breakthrough
in stabilizer design.
JK Fox ATS Steering Stabilizer
1983070
$403.99
JK STEERING STABILIZER RELOCATION BRACKET KIT

This steering stabilizer is designed to work with modified suspensions and larger
off-road tires to reduce bumpsteer, front end shimmy or wobble. The larger
diameter shock tube is superior to the factory damper and is designed for the
additional stress and requirements of an off-road vehicle. The oversized 2 body
and 5/8 hardened chrome rod allow for a heavy duty upgraded premium seal to
prevent pressure loss. An integrated dust shield protects the shock rod from high
impact salt and sand damage.
JK 9550 VSS Steering Stabilizer
1513001
$56.99
20
The heavy duty steering stabilizer

relocation bracket moves the steering
stabilizer up nearly 2.5 to eliminate
stabilizer body and shaft damage. The
heavy duty cast ductile iron bracket and
forged 10.9 stud reposition the stabilizer
to eliminate the tie rod roll that causes
a dead spot of unresisted movement in
the steering.
Steering Stabilizer Relocation Bracket Kit
1980880
$67.99
Jk 9550 vss performance shocks

JK 9550 VSS SHOCK ABSORBERS
We created an exceptional shock absorber designed and developed specifically

for the Jeep Wrangler. This means you get the best extreme off-road performance
and unequaled highway ride because it is designed specifically for your Jeep.
You will find premium-quality rubber bushings with Jeep specific bar pins, and an
e-dipped black finish that will withstand the most extreme off-road abuse.
The VSS gas shock uses a twin-tube design, with triple-chromed rod to ensure
extended trouble-free operation. This shock is all performance and packed with
features for extreme durability.
SHOCK FEATURES
Twin tube design is a more robust and rugged design geared toward
heavy duty off-road abuse
The outer tube protects the inner tube from damage, so if you dent
the outer tube, the shock will still function
Longer stroke travel with twin tube design
Velocity valve tuned to react perfectly with TeraFlex suspensions
Large diameter piston lowers internal operating temperatures
Travel limiter minimizes the impact of over-compression.
Oil block and seal keep all internal fluids contained and sealed
Heavy-duty shock canister provides strong protection from damage
Durable black e-dipped finish resists salt and other corrosives
Induction-hardened, triple-chrome plated rod provides strength
Double-welded shock eyelets reinforce and support.
Jeep specific bar pin
Limited lifetime warranty
Shocks are sold individually, unless specified otherwise.
2.5 LIFT
JK 2.5 9550 VSS Shocks - All 4
JK 2.5 Front 9550 VSS Shock - Each
JK 2.5 Rear 9550 VSS Shock - Each
1545100
1553100
1554100
$267.99
$66.99
$66.99
1545200
1553200
1554200
$267.99
$66.99
$66.99
1545400
1553400
1554400
$267.99
$66.99
$66.99
3 - 4 LIFT
JK 3-4 9550 VSS Shocks - All 4
JK 3-4 Front 9550 VSS Shock - Each
JK 3-4 Rear 9550 VSS Shock - Each
6 LIFT
JK 6 9550 VSS Shocks - All 4
JK 6 Front 9550 VSS Shock - Each
JK 6 Rear 9550 VSS Shock - Each
Install Time: 1 hour (all 4 shocks)
JK 9550 VSS Steering Stabilizer
HEAVY DUTY ROD

& OIL SEAL
WRANGLER SPECIFIC
MOUNTING STEM
WRANGLER SPECIFIC
BAR PIN
DOUBLE WELDED
EYELET
1513001
$56.99
CUSTOM VALVED TWIN

TUBE
21
Jk fox Performance Shocks

FOX 2.0 PERFORMANCE SERIES RESERVOIR SHOCKS W/ COMPRESSION DAMPING ADJUSTER
TeraFlex partnered with FOX to create a lightweight aluminum body, long travel
performance shock with TeraFlex specific valving to handle the extreme demands
that a prerunner requires.
Our testing with the FOX development team in the southern California desert
resulted in one the most performance oriented race-ready shocks available today.
On-site tuning, specific TeraFlex valving and extensive driver feedback data
results in this formidable shock that handles some of the toughest and fastest
trails out there.
The aluminum bodied 2.0 Performance Series adjustable reservoir smooth body
shock delivers industry leading and race dominating performance in a hassle-free
bolt on package. The CD Adjuster delivers 8 clicks of compression adjustability from very soft to very firm. The race developed high flow damping piston matched
with application specific valving provides the 2.0 Performance Series Reservoir
shock a predicable ride quality capable of handling the roughest road conditions.
Because our FOX valving codes are proprietary, these exclusive prerunner valved
shocks are only available through TeraFlex and our Authorized Dealers. If you
have a TeraFlex LCG prerunner suspension system, and want shock performance
to match, dont substitute - get TeraFlex Tuned FOX shocks.
SHOCK FEATURES
Compression damping adjuster delivers 8 clicks of compression
adjustability - from very soft to very firm.
Aircraft-grade 6061-T6 heat treated aluminum shock body
Impact cold forged body construction
Black anodized 6061-T6 billet aluminum eyelets & body caps
Hard anodized aluminum body for corrosion resistance
Aluminum shock body produces superior heat dissipation
Pressure balanced shock for superior handling characteristics
Shock engineering maintains maximum tire contact patch at all critical
points of suspension travel
Velocity sensitive valve plates
5/8 alloy steel shafts, heat treated and hard chrome plated
200 psi nitrogen gas pressurized for optimal performance
Snap-ring retention assembly prevents vibration induced un-threading
Internal Floating Piston reduces cavitation
Aircraft-grade red shock oil provides superior hot/cold temperature
resistant properties
TeraFlex Elite LCG prerunner performance tuned
2.5 - 4 LIFT
JK 2.5-4 FOX Shocks - All 4
JK 2.5-4 Front FOX Shock - Each
JK 2.5-4 Rear FOX Shock - Each
1990200 $1372.99
992820
$342.99
992819
$342.99
5 - 6 LIFT
JK 5-6 FOX Shocks - All 4
JK 5-6 Front FOX Shock - Each
JK 5-6 Rear FOX Shock - Each
1990500 $1372.99
992864
$342.99
992865
$342.99
Install Time: 1.5 hours (all 4 shocks)
JK Fox Steering Stabilizer
980986
$153.99
JK Fox ATS Steering Stabilizer
1983070
$404.99
REMOTE SHOCK RESERVOIR MOUNTING BRACKET KIT

Remote Shock Reservoir Mounting Bracket Kit - Pair 4909100
$19.99
This kit is for front shocks, and allows the optional mounting of the reservoir to
the frame
FLOATING PISTON
REMOTE RESERVOIR
22
NITROGEN CHARGED
RESERVOIR
COMPRESSION
DAMPING ADJUSTER
JEEP SPECIFIC
BAR PIN & STEM
URETHANE
SHOCK BUMPSTOP
Jk fox Performance Shocks

FOX 2.0 PERFORMANCE SERIES RESERVOIR SHOCKS
The aluminum bodied 2.0 performance series reservoir smooth body shock
delivers industry leading and race dominating performance in a hassle-free bolt on
package. The race developed high flow damping piston matched with application
specific vavling provides the 2.0 performance series reservoir shock a predicable
ride quality capable of handling the roughest road conditions.
2.5 - 4 LIFT
JK 2.5-4 FOX Shocks - All 4
JK 2.5-4 Front FOX Shock - Each
JK 2.5-4 Rear FOX Shock - Each
1980200
1982820
1982819
$921.99
$229.99
$229.99
1980500
1982865
1982864
$921.99
$229.99
$229.99
5 - 6 LIFT
JK 5-6 FOX Shocks - All 4
JK 5-6 Front FOX Shock - Each
JK 5-6 Rear FOX Shock - Each
FOX 2.0 EVOLUTION SERIES MONO TUBE SHOCKS

The 2.0 evolution series IFP smooth body shocks give you increased ride quality
and the control you need when heading into the unknown and provide increased
damping in any terrain. They use proven damping technology to provide a
comfortable on-road ride and predictable off-road handling in a variety of conditions.
These shocks are a perfect match for performance oriented suspension lifts with
a budget.
SHOCK FEATURES
2.0 smooth bore and honed seamless alloy shock body
Thick silver powder coat for superior corrosion resistance
Black anodized 6061-T6 Billet aluminum eyelets & body caps
Pressure balanced shock for superior handling characteristics
Shock engineering maintains maximum tire contact patch at all critical
points of suspension travel
Velocity sensitive valve plates
5/8 alloy steel shafts, heat treated and hard chrome plated
200 psi nitrogen gas pressurized for optimal performance
Internal floating piston reduces cavitation
Quiet nitrile rubber bushing
2.5 - 4 LIFT
JK 2.5-4 FOX Evolution Shocks - All 4
JK 2.5-4 Front FOX Evolution Shock - Each
JK 2.5-4 Rear FOX Evolution Shock - Each
1980250
983001
983003
$400.99
$99.99
$99.99
1980550
983002
983004
$400.99
$99.99
$99.99
5 - 6 LIFT
JK 5-6 FOX Evolution Shocks - All 4
JK 5-6 Front FOX Evolution Shock - Each
JK 5-6 Rear FOX Evolution Shock - Each
23
Jk speedbump bumpstops
JK specific tuned for high speed performance
Simple installation - no welding required
Quiet movement & function (no pad-slap clunk)
Absorbs large impact energy progressively during
compression to prevent bent axle tubes
Maintenance free, all-composite construction
Resistant to all types of conditions (mud, salt, sand, dust,
etc.)
Compatible with all suspension systems that retain factory
axle & spring mounting locations
Subzero temperature flexibility reduces fatigue
Patented technology
Patented
Design
CNC
machined
aluminum
clamping
collar
PAT. #8272653
Closed-cell
nitrogen
charged
microcellular
Foam
JK SPEEDBUMP BUMPSTOP KIT
CNC
machined
aluminum
Housing
3 LIFT
Integrated
Delrin
Sliding
piston
JK 3 SpeedBump Bumpstop Kit - All 4

JK 3 Front SpeedBump Bumpstop Kit - Pair
JK 3 Rear SpeedBump Bumpstop Kit - Pair
$757.99
$367.99
$388.99
1958400
1958401
1954760
$777.99
$388.99
$388.99
1958600
1958601
1958602
$814.99
$404.99
$408.99
4 LIFT
Delrin shaft
support
Bushing
1958300
1958251
1954760
6 LIFT
Extreme
conditions
external
wiper seal
Delrin
acetal resin
polymer
shaft
Delrin
Bumpstop
foot
Limited
lifetime
warranty
JK 2.5 SPEEDBUMP BUMPSTOP KIT
The 2.5 SpeedBump bumpstop kit includes 3 stroke front bumpstops and
innovative rear microcellular extensions contained in a UHMW cup.
JK 2.5 SpeedBump Bumpstop Kit - All 4
JK 2.5 Front SpeedBump Bumpstop Kit - Pair
JK 2.5 Rear SpeedBump Bumpstop Kit - Pair
1958250
1958251
1958252
$501.99
$367.99
$132.99
PERFORMANCE TUNED
24
MAINTENANCE
FREE COMPOSITES
EASE OF FITMENT &

INSTALL
ALL CONDITION
RESISTANCE
SUB ZERO TEMP

FLEXIBILITY
Jk speedbump application chart

SPEEDBUMP MOUNTING
Technical Information
Measuring and determining final bumpstop

compression height
2 1/2"
I.D. tubing
for mounting
3/4"
collar
thickness
It will be necessary to use a combination of standard bumpstop extensions, and

the SpeedBumps to properly bumpstop the vehicle. Specific attention to wheel
offset, tire diameter, tire width, fender flare clearance, and collapsed shock
length is critical. Improper measurement and installation of the SpeedBump and
bumpstop extensions will result in vehicle equipment and body damage.
1 5/8"
Travel
5 7/16"
To top of
SpeedBump
cap
2 3/4"
To cut edge
of factory JK
jounce tube
6 3/16"
4 5/8"
2 1/2"
5 3/4"
To cut edge
of factory JK
jounce tube
3"
Travel
For more in-depth technical

information on proper SpeedBump
measurement and installation
check out our website at
www.teraflex.com.
7/8"
JK LCG PRERUNNER SPEEDBUMP BUMPSTOP KIT
1958251
3 stroke SpeedBump
dimensions shown
JK FRONT SPEEDBUMP JOUNCE TUBE BRACE KIT
1958260
The TeraFlex prerunner SpeedBump bumpstop kit features 3 stroke bumpstops at

all four corners for maximum suspension control.
The factory JK spring guide & jounce tube can deform during hard compression
and suspension movement. This jounce tube brace adds an extra layer of
protection from damage. Does not work with the factory bumpstop bell cup - this is
designed only to work with TeraFlex SpeedBump bumpstops. Bolt on installation.
JK Front prerunner SpeedBump Bumpstop Kit

JK Rear prerunner SpeedBump Bumpstop Kit
JK Front SpeedBump Jounce Tube Brace Kit
1958251
1958260
$367.99
$398.99
4946810
$39.99

3 SpeedBump Mounting Sleeve w/ Clamp - Pair
3 SpeedBump Mounting Sleeve - Pair
4954770
1944780
1944790
$51.99
$23.99
$25.99
JK SPEEDBUMP BUMPSTOP PADS
SPEEDBUMP BUMPSTOP ADJUSTMENT SPACER KIT

1467250
These SpeedBump spacers allow you to fine tune the final compression length
of your suspension system and SpeedBump bumpstops. By spacing down
the SpeedBump bumpstop you can effectively increase bumpstop length to
compensate for additional lift or larger tires.
1/4 & 3/4 Adjustment Spacer Kit
1/4, 3/4, & 2 Adjustment Spacer Kit
1944730
1944740
$16.99
$26.99
1467125
1992000
Proper final bumpstop length is critical to prevent bottoming out of your shocks,
or tires into your fenders. These bumpstop pads allow you to fine tune your final
bumpstop length.
JK SpeedBump Rear Upper Strike Pad - Pair
1992000
JK 4-6 Rear Upper Bumpstop 2 Tall - Pair
1954802
JK SpeedBump Rear Lower Strike Pad 0.75 Tall - Pair 1954600
$30.99
$48.99
$25.99
$36.99
$26.99
25
Jk forged s/t swaybars

JK DUAL RATE FORGED S/T SWAYBAR
The dual rate features two torsion bars, one for heavy duty highway handling and
one tuned for off-road articulation. The trail swaybar offers some resistance, but
just enough to limit excessive body roll when in off camber and sidehill situations.
To disengage the swaybar with the S/T system, simply twist a knob and you are
on your way. To re-engage, rotate the knob again and the swaybar will self engage
when the vehicle is level. Fits all JK Wrangler models including the Rubicon and
Unlimited. Wheels must have 4 or less backspacing.
2012+ JKs - Need the vacuum pump relocation kit Part #4403100
1753720
1753725
$880.99
$880.99
JK SINGLE RATE FORGED S/T SWAYBAR
The TeraFlex S/T swaybar system is a simplified version of the dual rate. It provides
the superior highway swaybar for street driving with no resistance off-road when
disconnected. A simple twist of the knob releases the torsion bar, and allows
unrestricted movement. Simply twist again, and you are ready for the highway!
Fits all JK Wrangler models including the Rubicon and Unlimited. Wheels must
have 4 or less backspacing.
2012+ JKs - Need the vacuum pump relocation kit Part #4403100
JK 0-3 Front Single Rate Forged S/T Swaybar
JK 4-6 Front Single Rate Forged S/T Swaybar
1753710
1753715
$644.99
$644.99
JK TRAIL RATE FORGED S/T SWAYBAR
The TeraFlex trail S/T swaybar system provides trail-tuned torsion resistance when
off-road. Fits all JK Wrangler models including the Rubicon and Unlimited. Wheels
must have 4 or less backspacing.
FRONT
JK 0-3 Front Trail Rate Forged S/T Swaybar
JK 4-6 Front Trail Rate Forged S/T Swaybar
1753700
1753705
$439.99
$439.99
1754700
1754705
$439.99
$439.99
REAR
The Trail S/T Swaybar is NOT recommended for street use, and is intended for trail
use only (this swaybar does not provide adequate highway anti-roll characteristics).
2012 front JKs - Need the vacuum pump relocation kit Part #4403100
HD STREET TUNED
EXTERNAL SWAYBAR
The heavy duty street

swaybar is designed to offer
more resistance than the
stock swaybar for superb
highway control and handling.
The torsion bar is constructed
of 35 spline, heat treated
4130 chromoly steel for
fatigue resistance.
28
JK 0-3 Rear Trail Rate Forged S/T Swaybar

JK 4-6 Rear Trail Rate Forged S/T Swaybar
TRAIL TUNED
INTERNAL SWAYBAR
INTERNAL BUSHING
ELIMINATES WEAR
FORGED HIGH
CLEARANCE ARM
The trail swaybar is designed

to offer the perfect amount
of anti-roll when off-road.
This keeps the Jeep stable
and allows side hills and off
camber maneuvers without
loss of vehicle control.
Constructed of 22 spline, heat
treated 4340 chromoly steel.
The dual rate S/T features an

internal bushing that allows
both swaybars to rotate
independently of each other
when in the trail position. The
bushing eliminates any play
for tight working tolerances.
The forged high clearance

swaybar arm allows for
maximum wheel travel during
articulation and eliminates
most tire interference with
the swaybar. The forged arm
increases overall strength,
especially
side
loading
situations during articulation.
QUICK RELEASE &

ENGAGEMENT KNOB
The
swaybar
knob
is
ergonomically designed to
make engagement and disengagement a breeze. No
dirty or greasy hands. Just
rotate clockwise for trail use,
and counter-clockwise for
street use.
Jk suspension components
JK FRONT SWAYBAR QUICK DISCONNECT KIT
S/T SWAYBAR KNOB WRENCH
Indexed Wrench Detail
This light-duty wrench will help give you just enough leverage to easily turn the
knob on your S/T swaybar system. The indexed wrench is designed to provide
additional leverage for those that have limited hand strength or are not able to grip
the knob adequately.
Note: This wrench is not intended to be used as a high-torque method of disconnecting
the swaybar. It must only be used when the vehicle is in a neutral (flat) position, and slight
leverage is needed.
S/T Swaybar Knob Wrench
753333
$10.99
JK S/T SWAYBAR REPLACEMENT PARTS
TeraFlex quick disconnects are the leader in the industry. This design combines
silent function with ease of use. The upper swaybar link end has an OEM quality
narrow shoulder ball socket for no maintenance long term durability and silent
function. The lower swaybar link end has a large polyurethane ball and pin for easy
swaybar link removal. When connected for street use the link provides immediate
reaction during swaybar loading to eliminate excess play. This results in improved
lateral control and steering response compared to the stock rubber swaybar link
bushings.
When off-roading the swaybar links quickly disconnect and swing up out of the way
for unrestricted axle articulation. Fits all JK Wrangler models including Rubicon
and Unlimited.
JK 0-2.5 Front Swaybar Quick Disconnect Kit
JK 3-4 Front Swaybar Quick Disconnect Kit
JK 6 Front Swaybar Quick Disconnect Kit
1753010
1753000
1756000
$139.99
$139.99
$139.99
JK FRONT SWAYBAR LINK

Front 4 Swaybar Link - No Ends
9751211
Front 7.5 Swaybar Link - No Ends
97512
Swaybar Rod End (No Jam Nut) - LH Thread
9751213
Swaybar Rod End (No Jam Nut) - RH Thread
9751214
Front S/T Swaybar Hardware bag (Includes Rod Ends & Jam Nuts)

600380
Rear 12.25 Swaybar Link
754300
Rear 14.75 Swaybar Link
754410
Swaybar Crossmember Bushing - 0.95 I.D.
753327
Swaybar Crossmember Bushing - 1.5 I.D.
753328
$12.99
$13.99
$20.99
$20.99
$73.99
$29.99
$29.99
$13.99
$13.99
753020
8 Swaybar Link w/ Upper Swivel Stud

10 Swaybar Link w/ Upper Swivel Stud
12.25 Swaybar Link w/ Upper Swivel Stud
JK FRONT SWAYBAR QD REPLACEMENT PARTS
753006
753005
753020
$33.99
$33.99
$33.99
JK REAR SWAYBAR LINK KIT

600499
1601277
600504
1754500
Looking for replacement components from your front swaybar quick disconnect
set? We have made the most common lost parts available to help get your
swaybar back to functioning form. All items are sold individually unless noted
otherwise.
3/4 Lower Stud Kit w/ Washer, Nut & Hitch Pin Clip 1943705
3/4 Lower Stud
600499
5/8 Upper Stud
600503
Hitch Pin Clip
600504
Upper Stud Frame Bracket
600277
Upper Stud Frame Bracket Kit w/ Stud, Nut & Hitch Pin Clip

1601277
$16.99
$13.99
$10.99
$1.99
$4.99
These rear swaybar links are designed to reduce clearance issues between the
tire and rear swaybar. The upper link utilizes a sealed narrow shoulder tie rod
type ball socket for maximum tire clearance. The lower link utilizes a sealed ball
socket as well for precise immediate reaction during swaybar loading to eliminate
excess play. The swaybar link is constructed within OEM quality standards, and
provides long term durability. Note: These links will not work with the rear S/T trail
swaybar system.
JK 2.5 10.75 Rear Swaybar Link Kit - Pair
JK 3-4 12.25 Rear Swaybar Link Kit - Pair
JK 6 14.75 Rear Swaybar Link Kit - Pair
$33.99
1744500
1754500
1754410
$51.99
$58.99
$60.99
29
Jk monster flexarms
MONSTER FLEXARM FEATURES
JK FRONT LOWER FLEXARM KIT
TeraFlex Monster flexarms are designed to offer maximum adjustability,

dependability and performance while retaining factory control arm
mounting locations.
1-3/4 x .281 wall DOM tube provides maximum strength
Monster flexarm joint features a forged housing with integrated
bushing wall and utilizes a single snap ring design.
Chrome plated ball with increased shoulder height provides smooth
rotating surface to reduce bushing friction.
Interlocking polyurethane bushings deliver full contact surface area
Premium black powder coating provides superior durability and
abrasion resistance.
Premium zinc plating on forged rod end housing
Factory Length= 22-5/8

Min. Length= 22-3/4
Max. Length= 24-13/16
Uses 9/16 [14mm] Bolt
1-1/4-12 UNF Thread
2-5/8 Wide Ball
1-/2 Wrench On Tube
1-7/8 Wrench On Jam Nut
Sold In Pairs
JK Front Lower Flexarm Kit
1653700 $355.99
JK Front Lower Flexarm - Single
1653701
$177.99
Large Front Lower Offset Flexarm Joint

Large Flexarm Joint Rebuild Kit
Large Clevite Flexarm Bushing
4116250
1951000
4915161
$77.99
$27.99
$20.99
JK REAR UPPER FLEXARM KIT

1654800
Min. Length= 18-5/16
Max Length= 19-5/8
1654840
Min. Length= 17-1/8
Axle End
Use #1654800 in combination with a

complete 8 arm configuration.
Use #1654840 if using a 4 arm setup.
2-5/16 Wide Ball

7/8-18 UNS Thread
1 1/8 Wrench On Tube
1 1/4 Wrench On Jam Nut
JK REAR LOWER FLEXARM KIT
Frame End
Sold In Pairs
JK Rear Upper Flexarm Kit

JK Extra Short Rear Upper Flexarm Kit

1 1/4-12 UNF Thread
2-5/8 Wide Ball
1654800
1654840
$305.99
$305.99

JK Rear Upper Flexarm - Single
JK Extra Short Rear Upper Flexarm - Single
1654801
1654841
$152.99
$152.99
Small Rear Upper Offset Flexarm Joint

4116220
Small Rear Upper Offset Flexarm Joint Rebuild Kit - Frame End

1951400
Small Rear Upper Flexarm Joint Rebuild Kit - Axle End 1951450
$66.99
Sold In Pairs
JK Rear Lower Flexarm Kit
1654700 $338.99
JK Rear Lower Flexarm - Single
16547001 $170.99
Large Rear Lower Flexarm Joint

4116260
1951000
4915161
$22.99
$22.99
JK MONSTER 8 FLEXARM KIT
$66.99
$27.99
$20.99
The TeraFlex JK flexarm system can

be added to any existing suspension
lift. It includes all lower and upper
flexarms. flexarms allow custom pinion
and caster angles to be set for proper
alignment, they also are used to recenter the axle in the wheel well for
proper suspension movement, and to
restore factory wheelbase.
JK FRONT UPPER FLEXARM KIT

Min. Length= 18-1/4
Max. Length= 20-5/8
7/8-18 UNS Thread
2 Wide Ball
1-1/8 Wrench On Tube
JK Monster 8 Flexarm Kit
Sold In Pairs
1455000 $1301.99
FLEXARM JOINT REBUILD TOOL

JK Front Upper Flexarm Kit
1653800 $305.99
JK Front Upper Flexarm - Single
1653801
$152.99
Small Front Upper Flexarm Joint

Small Front Upper Flexarm Joint Rebuild Kit
4116230
1951100
$60.99
$22.99
This repair tool will make joint rebuilding

in the field as simple as it gets. This in
fact is the same tool that we use in house
to rebuild joints. The repair tool is easy
to use with two open end wrenches, or
sockets.
Large Flexarm Joint Field Rebuild Tool
Trackbar/Small Flexarm Joint Field Rebuild Tool
30
1951300
1951350
$28.99
$27.99
Jk Sport flexarms
SPORT FLEXARM FEATURES
JK FRONT LOWER SPORT FLEXARM KIT
TeraFlex sport fixed-length flexarms are designed to offer maintenance

free performance for 2.5 - 3 lifts.
Pre-adjusted length arm corrects caster and pinion angle for 2.5-3
lift kits.
1-5/8 x .156 wall DOM tube stands up to trail abuse and demands.
High quality, factory style bushings provide excellent vibration
damping ride quality characteristics with zero maintenance.
Full range of movement will not restrict articulation or flex off-road.
Premium black e-dipped coating provides superior durability and
corrosion resistance.

Sport Length= 22-13/16
Sold In Pairs
JK Front Lower Sport Flexarm Kit
JK SPORT 4 FLEXARM KIT
1252000 $199.99
JK REAR LOWER SPORT FLEXARM KIT

Sold In Pairs
TeraFlex sport fixed length flexarms are designed to offer maintenance free
performance for 2.5 - 3 lifts. This kit includes front lower, and rear upper sport
flexarms.
JK Sport 4 Flexarm Kit
1254000 $399.99
JK Rear Lower Sport Flexarm Kit
1252100 $199.99
JK SPORT 8 FLEXARM KIT

JK FRONT UPPER SPORT FLEXARM KIT

Sold In Pairs
TeraFlex sport fixed length flexarms are designed to offer maintenance free
performance for 2.5 - 3 lifts. This complete kit includes front lower, front upper,
rear lower, and rear upper sport flexarms
JK Sport 8 Flexarm Kit
JK Front Upper Flexarm Kit
1252200 $179.99
1258000 $779.99
JK FLEXARM COMPLETE JOINT REBUILD KIT
JK REAR UPPER SPORT FLEXARM KIT

1952200
Sold In Pairs
This complete rebuild kit includes all flexarm joint rebuild components and Clevite
bushings required to completely rebuild your TeraFlex flexarms. Part #1952300
rebuilds 4 arms - front lower and rear upper flexarms.
JK Rear Upper Sport Flexarm Kit
JK Short Flexarm Complete Joint Rebuild Kit - 8 Arms 1952200
JK Long Flexarm Complete Joint Rebuild Kit - 8 Arms 1952100
$348.99
$192.99
$338.99
1252300 $199.99
31
Jk monster Long flexarms

JK FRONT LOWER LONG FLEXARM KIT
JK REAR LOWER LONG FLEXARM KIT
Min. Length= 34-7/8

Max. Length= 37-1/4
1 1/4-12 UNF Thread
2-5/8 Wide Ball
Min. Length= 32-1/2

1 1/4-12 UNF Thread
2-5/8 Ball
Sold In Pairs
Sold In Pairs
JK Front Lower Long Flexarm Kit
1657730
JK Rear Lower Long Flexarm Kit
$414.99
1657740

JK Front Lower Long Flexarm - Single
1657731
$207.99
Large Front Lower Offset Flexarm Joint

4116250
1951000
4915161
$77.99
$27.99
$20.99
JK Rear Lower Driver Side Long Flexarm - Single

1654719
JK Rear Lower Passenger Side Long Flexarm - Single 1654729
4116260
1951000
4915161
$207.99
$207.99
$66.99
$27.99
$20.99
JK STRAIGHT REAR LOWER LONG FLEXARM KIT
JK FRONT UPPER LONG FLEXARM KIT
Min. Length= 34-7/8

Max. Length= 37-1/4
1 1/4-12 UNF Thread
2-5/8 Wide Ball
Min. Length= 26-3/4

Max Length= 28-1/8
Uses 12mm Bolt (@Axle End)
Uses 14mm/ 9/16 Bolt (@Frame End)
7/8-18 UNS Thread
2 Wide Ball w/ 9/16 Bolt
Sold In Pairs
Sold In Pairs
JK Straight Rear Lower Long Flexarm Kit
1657340 $414.99
JK Front Upper Long Flexarm Kit
1657830 $372.99
JK Rear Lower Driver Side Long Flexarm - Single
1657309
$196.99
JK Front Upper Long Flexarm - Single
1657839
$185.99

4116260
1951000
4915161
$66.99
$27.99
$20.99
Small Front Upper Offset Long Flexarm Joint

Small Upper Long Flexarm Joint Rebuild Kit
4117220
1951500
$66.99
$22.99
JK REAR UPPER LONG FLEXARM KIT

Axle End
JK ELITE LCG LONG FLEXARM UPGRADE KIT

The TeraFlex Elite LCG long
flexarm upgrade kit is designed
as an upgrade to a current
short arm suspension system.
There is no need to upgrade
parts that you already own and
have installed (such as springs,
shocks, and bumpstops). The
long flexarm upgrade kit comes
with all frame brackets, upper
and lower long flexarms, and
necessary hardware. Trackbar
brackets,
and
adjustable
trackbars are not included, but
can be ordered separately.
Welding is required.
JK Long Flexarm - Arms Only (3 - 6 lift)

JK Long Flexarm Bracket Kit - Brackets Only
JK Long Flexarm Kit - Arms & Brackets (3 - 6 lift)
JK Long Flexarm - Arms Only (2.5 lift)
JK Long Flexarm Kit - Arms & Brackets (2.5 lift)
1457000 $1602.99
1957000 $576.99
1955000 $2176.99
1457020 $1602.99
1955020 $21761.79
32
$414.99

Max. Length= 20-3/4
7/8-18 UNS Thread
2 Wide Ball (Frame/Fixed Eyelet End)
2-5/16 Wide Ball (Axle/ Adjustable End)
Frame End
Sold In Pairs
JK Rear Upper Long Flexarm Kit
1657840 $400.99
JK Rear Upper Long Flexarm - Single
1654819
$199.99

4116220
Small Rear Upper Offset Flexarm Joint Rebuild Kit - Axle End

1951400
Small Upper Long Flexarm Joint Rebuild Kit - Frame End

1951500
$66.99
$22.99
$22.99
Jk trackbars & trackbar brackets

JK FRONT FORGED ADJUSTABLE TRACKBAR KIT
JK HEAVY DUTY FRAME BRACE & DRAG LINK FLIP KIT
This massive heavy duty forged front adjustable trackbar is designed as the
ultimate in front end strength to eliminate any front end shimmy or handling issuesthis Monster trackbar is 230% stronger than the factory trackbar. No bracketry
changes are necessary, and it is a complete bolt on component. The trackbar
is designed to cycle through the full movement of suspension travel without
interfering with other components. Fits all vehicles stock to 6+ inches of lift.
JK Front Forged Adjustable Trackbar Kit
1753418 $261.99
JK Replacement Trackbar Bushing
835770
$24.99
JK FRONT TRACKBAR AXLE BRACKET GUSSET
Driving at high speeds can quickly loosen and bend critical suspension points. This
trackbar bracket gusset will beef up and prevent the trackbar axle bracket from
egging out the trackbar hole during high speed driving.
JK Front Trackbar Axle Bracket Gusset
4951800
The HD forged front flip drag link has been designed to solve several front end
issues with lifted JK Wranglers. The new drag link is flipped over the knuckle, and
uses a new tapered insert to mount the drag link into the knuckle. The HD drag link
is 50% stronger than the factory drag link to help eliminate front end shimmy and
other alignment issues. The forged drag link will thread into the factory adjusting
sleeve. This drag link is designed to work with lifts over 4. The kit also includes a
frame side trackbar drop bracket to keep steering geometry correct, and a frame
brace strengthens the frame to further reduce any front end shimmy or excess
movement. Welding is required.
JK Heavy Duty Frame Brace & Drag Link Flip Kit
1600440
$446.99
JK Heavy Duty Frame Brace & Drop Bracket Kit

JK Heavy Duty Drag Link Flip Kit
JK Heavy Duty Trackbar Drop Bracket Kit
1600444
1600448
1953000
$283.99
$218.99
$134.99
$10.99
JK REAR TRACKBAR BRACKET KIT
JK REAR FORGED ADJUSTABLE TRACKBAR
The rear forged adjustable trackbar is designed to maximize rear passenger spring
clearance. The trackbar can be used with or without a trackbar bracket and helps
to keep the rear axle correctly centered under the vehicle. The trackbar bracket is
designed to withstand the added abuse when used in extreme off-road situations.
JK Rear Forged Adjustable Trackbar
1754418
$251.99

JK Replacement Trackbar Bushing
835770
The JK rear trackbar bracket is

designed for 2.5-6 lifts, and offers
multiple mounting locations. The bolton bracket mounts to the rear axle.
This trackbar bracket is recommended
for superior drivability to reduce rear
body roll tendencies by restoring the
proper roll center of the vehicle.
Welding is recommended for final
installation.
JK 2.5 Rear Trackbar Bracket Kit

JK 3-6 Rear Trackbar Bracket Kit
$24.99
$107.99
$111.99
JK REAR TRACKBAR BRACKET KIT (FOR BUDGET BOOST)
JK FLEXARM CAM BOLT WASHER KIT
This trackbar bracket is designed for

budget boost type lifts and restores
the trackbar to a natural position with
no binding or interference with other
components.
Mounts to the upper trackbar frame
mounting
point.
Some
drilling
required, template included.
Are you tired of your control

arms always coming out of
adjustment? Stop the constant
axle misalignment.
These flexarm cam bolt washers
are designed to fit into the factory
location for front lower & rear
upper cam bolt adjusters. These
washers prevent the flexarm
bolt from potential movement by
locking the position of the bolt.
Kit includes 8 washers.
JK Flexarm Cam Bolt Washer Kit
1954776
1954777
4951700
$11.99
JK Budget Boost Rear Trackbar Bracket Kit
1954202 $36.99
33
Jk axle components
JK DANA 30 & 44 HIGH STEER SYSTEM
TeraFlex JK high steer system provides a heavy duty solution for several weak
vulnerabilities found in the stock JK axle steering configuration. This kit is designed
to work perfectly on JK wranglers with 4-6 of lift, and will maintain steering
geometry at the correct angles for superior highway drivability and increases tie
rod ground clearance by over 1-1/8 to reduce tie rod damage and bending.
The high steer knuckle is cast from heavy duty ductile iron and features
reinforcements in key section areas that are prone to stress and deflection.
This kit is compatible with all factory and aftermarket axle shafts, ball joints, wheel
hubs, and tie rod. All factory stability and traction control systems including ESP
and ABS remain fully functional.
4390975
Note: This kit must be used with a flipped drag link to improve handling maintain correct
steering geometry. A minimum of 16 diameter wheels must be used with the JK high steer kit.
JK High Steer System w/ Drag Link End

JK High Steer System w/ Complete Drag Link
JK HIGH STEER KNUCKLE KIT

TeraFlex JK high steer is cast
from heavy duty ductile iron and
features reinforcements in key
section areas that are prone
to stress and deflection, and
provides a heavy duty solution
for several weak vulnerabilities
found in the stock JK axle
steering configuration. This kit
is designed to work perfectly
on JK wranglers with 4-6 of
lift, and will maintain steering
geometry at the correct angles
for superior highway drivability and increases tie rod ground clearance by over
1-1/2 to reduce tie rod damage and bending.
JK High Steer Knuckle Kit (knuckles only)
4390870
$499.99
JK HD TIE ROD KIT
The TeraFlex HD tie rod & drag link kit is designed for extreme conditions that
typically will cause factory steering components to bend and fail. The HD 1.6 O.D.
4140 heat treated chromoly tie rod is over 200% stronger than the factory tie rod.
The forged tie rod end housing is designed specifically for JKs and allows proper
clearance for use with factory 17 wheels. The tie rod end joint incorporates the
same features found in our ball joints, including a 4140 chrome moly Ball/stud
and 1045 carbon steel housing. It also features adjustable preload tension to
ensure proper long term durability. The joint is pressed into the rod end housing
and secured with a snap ring. When oriented in the Tie Rod configuration, the joint
offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow
maximum turning. The drag link is fully forged to eliminate any excess movement
during hard steering maneuvers and utilizes a factory style adjusting collar and
pinch clamp for simple adjustments.
1853900
1853905
$749.99
$749.99

JK HD Tie Rod
JK HD Drag Link
JK HD Flipped Drag Link
34
HD REPLACEMENT BALL JOINT KIT
3442002
TeraFlex HD ball joints are engineered to handle the increased load caused by
oversized tires and offset wheels. The upper ball joint incorporates hard sintered
wear bushings to handle extreme side load demands with out failure.
The lower ball joint features a threaded top cap for adjustable preload and allows
grease servicing without axle shaft removal, even with larger RCV shafts. A
machined grease passage in the lower joint housing assembly provides lubrication
access without affecting the ball joint load surface.
These ball joints fit 2007-2012 JK Wrangler Dana 30 and Dana 44 axles.
Upper ball joint features
Extremely hard Sintered wear bushings to handle side load demands without
failure
Magnesium Phosphate coating to inhibit corrosion throughout
4140 chrome moly Ball/stud and a 1045 carbon steel housing
Factory style serrated flange nut and grease fitting
1853900
JK HD Tie Rod & Drag Link Kit

JK HD Tie Rod & Flipped Drag Link Kit
4390875 $989.99
4390975 $1159.99
1853910
1853920
1853930
$399.99
$379.99
$379.99
Lower ball joint features

Hard alloy tool steel slotted wear plate for ball/stud to socket wear protection
4140 chrome moly ball/stud with magnesium phosphate anti-corrosion coating
Factory style serrated flanged castle nut
Adjustable end cap with lateral greasing access for easy on the Jeep servicing
CR black Neoprene boot locked into position with both a spring as well as a
spring steel ring
Note: Fits 2007-2012 JK Wrangler Dana 30 & Dana 44 axles. We recommend ball joints
without knurls as they will not score the inner knuckle and open up the bore. We also offer ball
joint with knurls for ball joints that have a loose press fit in the inner knuckle due to repeated
ball joint replacement or if knurled ball joints have been installed in the past.
JK Ball Joint Upper & Lower Kit - w/out knurl

JK Ball Joint Upper & Lower Kit - w/ knurl
JK Ball Joint Upper & Lower Set of 4 - w/out knurl
JK Ball Joint Upper & Lower Set of 4 - w/ knurl
3440000
3440020
3442002
3442022
$125.99
$125.99
$249.99
$249.99
Dana 60 Ball Joint Upper & Lower Kit - w/out knurl

3600000
Dana 60 Ball Joint Upper & Lower Kit - w/ knurl
3600020
Dana 60 Ball Joint Upper & Lower Set of 4 - w/out knurl 3602002
Dana 60 Ball Joint Upper & Lower Set of 4 - w/ knurl 3602022
$175.99
$175.99
$349.99
$349.99

Ball Joint Preload Adjustment Tool
1344000
$9.99
Jk axle Brackets & components

JK KNUCKLE GUSSET & AXLE SLEEVE KIT
JK YOKE U-BOLT CONVERSION KIT
4240300
The JK axle sleeve and gusset kit is designed to reinforce the weak axle tubing
and knuckles on JK Dana 30 or 44 factory axles. This prevents unwanted bending
or breaking under extreme conditions.
JK Axle Sleeve Kit
JK Axle Sleeve & Upper Knuckle Gusset Kit
JK Upper Knuckle Gusset Kit - Pair
JK Lower Knuckle Gusset Kit - Pair
4990700
4990900
4990800
4990910
$89.99
$132.99
$43.99
$46.99
Install Time: 5 hours (Complete Kit)

Install Time: 4 hours (Sleeve Kit)
JK LOWER FLEXARM SKIDPLATE KIT
The u-bolt conversion kit replaces the yoke and changes the OEM Rzeppa CV
flange with a standard 1310 CV cardan joint style yoke and U-bolt style connector.
The conversion makes u-joint changes easier after breakages. These yokes must
be used with a CV style (double cardan) driveline.
JK Front Axle Yoke Kit - Each
JK Rear Axle Yoke Kit - Each
JK Transfer Case Output Yoke Kit - Each
JK Yoke Kit - All 4
4253100
4254100
4949100
4240300
$105.99
$105.99
$105.99
$415.99
HEAVY DUTY DIFFERENTIAL COVER KIT
4937330
4937400
The JK lower control arm skidplate will protect and strengthen the lower control
arm assembly from bending and prevent any damage. The 1/4 thick CNC laser
cut brackets are designed to be welded for proper installation.
JK Front Lower Flexarm Skidplate Kit
JK Rear Lower Flexarm Skidplate Kit
4937330
4937400
$15.99
$48.99
3990630
3990650
HIGH PERFORMANCE TERA30/44 FRONT AXLE TUBE SEAL
TeraFlex heavy duty differential covers are designed to offer extreme protection
from rocks, obstacles and other debris on the trail. The cover is cast from the same
high-strength ductile-iron as our HD axle housings. The cover is over 3/8 thick to
ensure protection.
Dana 30 HD Differential Cover
Dana 60 & CRD60 HD Differential Cover
3990630
3990650
3990660
$93.99
$103.99
$135.99
JK RUBICON 241OR 2LOW SHIFT SECTOR KIT

4354025
The Teraflex high performance front axle tube seal is designed exclusively for
the oversized 3.25 O.D. axle tubes found on Tera30 and Tera44 JK replacement
housings. The outer triple O ring tube seal presses into the housing and provides
a positive mud and water barrier. The inner double axle seal surface is designed
with a cavity between the seal surfaces to form a grease filled pocket providing
lubrication for the seals and provides another barrier to mud and grime. These are
the same seals that were developed, proven and currently used in many NASCAR
applications.
The axle tube seal is fully compatible with all available Rubicon and non-Rubicon
axle shafts, including 27 spline Dana 30 up to aftermarket 1.5 35 spline Dana 44
shafts. The billet 6061-T6 aluminum seal housing is laser etched with graphics
and black hard anodized for superior corrosion resistance. Fits Tera30 and Tera44
axles. Specify axle tube thickness.
Note: These inner seals may not work with all aftermarket axle shafts. Due to the large number
of aftermarket shafts available, it is the responsibility of the customer to ensure fitment.
#4354050 will only fit axles with serial numbers from 4225 and higher.
Tera30/44 Front Axle Tube Seal - w/ 1/4 wall tube

4354025 $169.99
4354050 $169.99
The TeraFlex 241OR 2Low shift sector kit increases the standard low range shift
pattern to include a rear 2WD low range option. It is an internal upgrade and does
not require any other modifications to the transfer case housing or components.
Installation can be done with the transfer case remaining in the vehicle.
The new shift pattern is: 2H > 4H > N > 2L > 4L
JK Rubicon 241OR 2Low Shift Sector Kit
2266900
$271.99
35
Jk brake components
JK FRONT BIG BRAKE KIT
The TeraFlex JK front big brake kit is designed as a factory brake upgrade for JK
owners looking for a performance brake package that will handle the increased
braking requirements needed after larger wheels and tires are used.
The simple bolt on upgrade installation requires no cutting, welding or adapter
bracketry.
Oversized 56mm dual piston caliper increases clamping force and surface area
13.3 slotted rotor for superior stopping performance
Mill-balanced vented rotors for maximum heat dissipation
Composite-resin, semi-metallic pads increase pad life and reduce noise & dust
Improved braking performance over factory brake system
100% bolt-on upgrade for easy installation
Note: A minimum of 17 diameter wheels must be run with the big brake kit.
JK Front Big Brake Kit

JK Front Big Brake Kit w/ Slotted Rotors
4303400
4303420
JK Front Big Brake Kit Rotor - Each

JK Front Big Brake Kit Slotted Rotor - Driver
JK Front Big Brake Kit Slotted Rotor - Passenger
JK Front Big Brake Kit Brake Pads - All 4
4303410
4303412
4303411
4303430
$747.99
$774.99
SIMPLE FACTORY
BRAKE UPGRADE
OVERSIZED 56MM
TWIN PISTON CALIPER
$109.99
$137.99
$137.99
$76.99
4303420
OPTIMIZED SEMIMETALLIC PADS
OEM STYLE ANCHOR

BRACKETS
MILL-BALANCED
VENTED ROTORS
JK OVERSIZED BORE MASTER CYLINDER

This JK brake master cylinder compensates for the larger caliper piston size with an oversized bore that
has 14% more flow to provide greater fluid volume to the front Big Brake Kit.
We highly recommend this master cylinder for 2007-2011 JKs with the Big Brake Kit to provide a firm pedal
feel. 2012+ JKs do not need this kit.
Note: Specific steps must be taken when bleeding the brake system, a bench bleed is recommended before installing the
master cylinder into the Jeep. Slowly pump the pedal during the bleed process to avoid seal damage.
JK Oversized Bore Master Cylinder
4303450
$209.99
JK FRONT PERFORMANCE BIG ROTOR KIT
The TeraFlex JK performance front big rotor kit is the perfect upgrade for JK
Wrangler owners requiring increased braking performance for 33-35 tires.
This kit allows the factory brake caliper and brake pads to be retained, while
increasing the rotor diameter from 11.9 to 13.3. The increased clamping distance
from the rotor center results in greater braking leverage to allow stopping distance
to be decreased substantially (larger rotor diameter = greater stopping power). The
simple bolt-on installation upgrade requires absolutely no brake line modification
or brake bleeding, and can be installed with basic hand tools.
Product Features & Benefits:
Brake caliper relocating anchor bracket
Retain factory brake caliper & pads
No brake bleeding or brake line modification required
Fits dual wheel bolt patterns 5x5 or 5x5.5
4303490
JK Front Performance Big Rotor Kit

JK Front Performance Slotted Big Rotor Kit
4303480
4303490
$296.99
$318.99

36
4303410
4303412
4303411
$109.99
$137.99
$137.99
Jk brake components
JK REAR PERFORMANCE BIG ROTOR KIT
The TeraFlex JK performance rear big rotor kit is the perfect upgrade for JK
Wrangler owners requiring increased braking performance with larger tires.
increasing the rotor diameter to 13.5. The increased clamping distance from the
rotor center results in greater braking leverage to allow stopping distance to be
decreased substantially (larger rotor diameter = greater stopping power). The
Product Features & Benefits:
Brake caliper relocating anchor bracket
13.5 machined rotor for superior stopping performance
Mill-balanced rotors
External cooling fins for maximum heat dissipation
Retain factory brake caliper & pads
Retains internal factory parking brake
No brake bleeding or brake line modification required
Fits dual wheel bolt patterns 5x5 or 5x5.5
Fits OEM 17 wheels
JK Rear Big Brake Rotor Kit
4304450
$399.99
SIMPLE BOLT-ON
UPGRADE
OEM STYLE ANCHOR

BRACKETS
Note: An 8 Lug option is available, but must be purchased in combination with the TeraFlex
Full Float Kit (3043000 or 3043200)
MULTIPLE WHEEL
BOLT PATTERNS
STEEL BRAIDED BRAKE LINE KIT
13.5 MILL-BALANCED
ROTORS
PARKING BRAKE
INTEGRATION
JK 1.25 WHEEL OFFSET ADAPTER KIT
These DOT approved stainless steel braided brake lines are designed for most
late model Jeep applications. These stainless line kits will prevent line expansion,
thereby giving a much firmer-feeling pedal. All brake lines measure longer than
stock for additional brake line length. All stainless brake lines are made to MVSS1006 specifications.
The TeraFlex JK specific wheel spacer is designed for those desiring to retain their
stock wheels, but need to run larger tires. The wheel adapter & spacer will allow
the use of a 5x4.5 or 5x5.5 bolt pattern wheel with JK axles.
The offset adapters come complete with wheel studs pressed in, and spacer lug
nuts. 5x5 to 5x5 adapter is aluminum, 5x4.5/5.5 is steel. Sold in pairs.
JK 26 Front Brake Line Kit - Pair

JK 30 Rear Brake Line Kit - Pair
JK Wheel Offset Adapter Kit - 5x5 to 5x5

Wheel Offset Adapter Kit - 5x5.5 to 5x5.5
4353310
4350310
$100.99
$100.99
1055000
1055020
$101.99
$151.99
Install Time: 1 hour + .5 for wheel bolt pattern change
JK REAR BRAKE LINE EXTENSION KIT
On lower lift heights (2 & 3) it

is mandatory to extend your rear
brake lines, but this process can be
accomplished without having to unseal
the brake system. This simple brake line
extension bolts to the frame and lowers
the brake line 3.25
JK Rear Brake Line Extension - Pair
Our redesigned website includes quicker loading, easier navigation, improved

relevant search results, and connections to our highly qualified dealer network, or
the ability to purchase products directly.
4304400
$16.99
TeraFlex.com is accessible from any web-enabled desktop computer, tablet,

mobile device, or smartphone.
37
Jk bumpers
JK FRONT EXPLORER BUMPER
The TeraFlex explorer front bumper is designed as an ultra-minimal but functional

accessory. This bumper will fit all major winch models with standard bolt pattern including the larger Warn powerplant. Integrated d-ring mounts aid with recovery
equipment. The explorer bumper also allows the use of the factory fog lights to
retain factory styling and technology. Comes in textured black powder coat finish.
JK Front Explorer Bumper
4653120
$460.99

JK Front Explorer Bumper Winch Mount Plate Kit
4638420
$70.99
JK Front Epic Bumper - offset drum winches

JK Front Epic Bumper - centered drum winches
4653100
4653200
$944.99
$944.99
JK FRONT EPIC BUMPER
The TeraFlex epic front bumper for the JK Wrangler is designed to offer ultimate
rock protection, and match the design styling of the JKs body. The epic front
bumper is designed with an integrated winch mount. The bumper features
recessed mounting, allowing taller winches to take up less grill space to allow
increased radiator air flow for maximum cooling. This bumper will fit all major
winch models with standard bolt pattern - including the larger Warn powerplant.
A separate bumper is available for centered drum winches - like the Warn zeon.
Integrated d-ring mounts aid with recovery equipment. The epic bumper also
allows the use of the factory fog lights to retain factory styling and technology.
JK Front Epic Bumper w/hoop - offset drum winch

4653230 $1144.99
JK Front Epic Bumper w/hoop - centered drum winch 4653200 $1144.99
Note: 2012+ Wranglers require the use of the JK Vacuum Pump Relocation Bracket Kit #4403100.
JK REMOVABLE MUD FLAP KIT
JK 2012+ VACUUM PUMP RELOCATION BRACKET KIT
Typically mud flaps are a nuisance and

cannot be easily removed for off-road
use. The TeraFlex heavy duty mud flap
kit is easily installed, and when its time
for off-road use they are easily removed
by pulling a pin. They can be stored in the
back of the vehicle, and installed before
returning to the highway.
The mud flaps will fit most vehicles.
Some drilling is required.
When mounting an aftermarket bumper

or winch on a 2012+ JK it may be
necessary to relocate the factory 3.6L
VVT vacuum pump from the front
crossmember. This simple bracket
moves the vacuum pump into the engine
bay to a secure and safe location. Some
vacuum tube re-routing is required.
JK 2012+ Vacuum Pump Relocation Bracket Kit
4403100
$50.99
JK Removable Mud Flap Kit
4808401
$113.99
JK REAR OUTBACK BUMPER
4654130
The TeraFlex outback rear bumper for the JK Wrangler is designed to offer ultimate
rock protection, and continue to match the design styling of the vehicles body but
still offer the protection needed to allow the 4500+ lb. vehicle to push over rocks
and obstacles. The rear bumper features a recessed spare tire well, and can be
paired with the TeraFlex HD hinged tire carrier and mount to allow easy access
to the rear of the Jeep (must be ordered separately). Comes in textured black
powder coat finish.
JK Rear Outback Bumper
JK Rear Outback Bumper w/OEM Fog Light Mounts
4654100 $944.99
4654130 $1023.99
38
Jk Hd Spare Tire Mounting Kit

JK HD HINGED CARRIER & SPARE TIRE MOUNTING KIT
Patented
Design
PAT. #D698224
Complete JK HD Hinged Carrier & Adjustable Spare Tire Mounting Kit

4838150 $747.99
FEATURES & BENEFITS

Innovative and unique patented design
Lightweight aluminum
Maintains single one-handed entry to the Jeep cargo area
Allows adjustment for up to 37 tire
Threaded mounting holes for mounting accessories (fuel cans,
recovery jack, etc.)
Eliminates tailgate stress and rattles
Simplicity and ease of installation - can be performed using common
hand tools.
No drilling required.
Factory form fitting geometry and finish. CAD-designed tooling
follows the precise compound curvature of the Jeep body, resulting in
a carrier with an OEM appearance.
No aftermarket bumper purchase required works with OE and most
aftermarket bumpers.
Patented Design
The TeraFlex heavy duty adjustable tire carrier kit is designed to carry up to a 37
tire over the most extreme trails and obstacles, and provide easy and immediate
access to the rear cargo area with a single action.
The TeraFlex heavy duty adjustable tire carrier kit spreads the load and weight
of the tire to more than just one hinge point. Incorporating and using the factory
tailgate hinge mounting points spread and separate the load as far apart as
possible, resulting in maximum strength and durability.
Dedicated tooling provides a cast A356.2 T6 Aluminum main component. This
keeps the carrier as light, and strong as possible. The fit and finish is designed
to follow the flow and contour of the Jeep body, while seamlessly providing
additional mounting points for off road accessories such as recovery jack and
fluid containers. The factory Jeep body provides substantial internal gussets and
bracing that easily supports the new tire carrier and oversized tire. The HD hinge
brackets are forged steel and the HD 5/8 hinge pins are constructed from cold
formed high-carbon hardened steel. The combination of mounting location and
HD mounting brackets provides one of the strongest, rattle-free tire carriers on
the market today. The TeraFlex HD tire carrier removes all stress from the gate by
utilizing the HD reinforcement carrier as the load-carrying component; in effect it
carries the weight of the tailgate assembly and the spare tire.
SIMPLE ONE-HANDED
REAR CARGO ACCESS
One of the key benefits of the

HD carrier is that it retains the
single one-handed access to
the rear cargo area without
compromising
strength
or
function of the carrier.
CUSTOM FORE-AFT
TIRE ADJUSTMENT
The adjustable tire mounting

kit allows fine tuning fore and
aft spare tire position to keep
it secured as close to the body
as possible for maximum rear
clearance.
JK HD ADJUSTABLE SPARE TIRE MOUNTING KIT
JK HD Adjustable Spare Tire Mounting Kit - 5x5

JK HD Adjustable Spare Tire Mounting Kit - 5x5.5
4838130
4838235
$234.99
$244.99
JK HD HINGED CARRIER
JK HD Hinged Carrier
HEIGHT ADJUSTABLE
MOUNTING
Multiple
vertical
mounting
holes provide custom spare
tire height to fit multiple rear
bumper configurations and to
keep center of gravity as low as
possible.
4838100
$511.99
5/8 HIGH-CARBON
HARDENED STEEL PIN
Cold
formed
high-carbon
hardened steel 5/8 hinge pins
connect the cast aluminum
carrier to the HD forged hinges.
Pre-installed brass bushings
provide low-friction movement.
HD FORGED STEEL
HINGE BRACKET
Forged steel hinge brackets bolt

to the factory reinforced hinge
mounting points for superior
strength. The hinge brackets
provide the support needed for
the complete assembly.
39
Jk hd spare tire mounting kit

JK HD HINGED CARRIER ACCESSORY MOUNT
JK HD HINGED CARRIER ROTOPAX MOUNT TO HI-LIFT

Do you have both a Hi-Lift jack, and
a RotopaX container? Want to carry
them both on your TeraFlex HD hinged
carrier? This simple bracket bolts to
the jack leg and will carry one 2 gallon
RotopaX container or two 1 gallon
container. RotopaX and pack mount are
not included.
Securely mount a Hi-Lift jack (or

RotopaX containers) to the TeraFlex HD
hinged tire carrier mount. This bracket
is computer designed, laser cut, and
precision bent to provide maximum
strength and durability required to mount
heavy safety equipment to your Jeep.
This accessory mount also incorporates
a CB antenna mount.
JK RotopaX to Hi-Lift Handle Mount
A separate RotopaX mount will allow

you to mount RotopaX containers to a
Hi-lift jack handle when using the hinged
carrier accessory mount.
4838230
$28.99
JK HD CARRIER SPARE TIRE WHEEL SPACER KIT

JK HD Hinged Carrier Accessory Mount
4838200
$89.99
This wheel spacer is required when

mounting a combination of a stock wheel
and 35+ spare tire to the TeraFlex HD
carrier & spare tire mounting kit.
JK SPARE TIRE LICENSE PLATE MOUNT KIT
JK HD Carrier Spare Tire Wheel Spacer Kit
1055005
$50.99
JK HD HINGED CARRIER CB ANTENNA MOUNT

4838162
This bracket will relocate your license plate from its vulnerable stock location to
your spare tire.
Note: Most states require the license plate to be illuminated at night. This bracket
does not include any illumination lights.
Easily mount a cb antenna to your

TeraFlex hinged carrier mount. This
bracket is perfect if you are not planning
on mounting additional components to
the hinged carrier, but need the use of
a cb antenna.
Note: This antenna mount can only be used
without the accessory mount.
Spare Tire Third Brake Light & License Plate Mount Kit w/ Lug Nuts

4838162
Spare Tire License Plate Mount Kit - No Lug Nuts
4838165
$48.99
$25.99
JK Hinged Carrier Accessory CB Mount
4838220
$24.99
JK ALUMINUM ROCK SLIDER KIT
End Profile
2 DOOR
JK Aluminum Rock Slider Kit - Raw
JK Aluminum Rock Slider Kit - Powder Coated
4937300
4637300
$513.99
$629.99
4937310
4637310
$523.99
$649.99
TeraFlex rock sliders are constructed from extruded 6063-T5 aluminum, making
them extremely strong and light weight at the same time. They are over 1/4 thick
in key strength areas to provide structure and strength. They are easy to install
with few modifications to your vehicle (some drilling required). Rubber beading is
included to prevent any scuffing between the sliders and the body.
4 DOOR
JK Aluminum Rock Slider Kit - Raw
JK Aluminum Rock Slider Kit - Powder Coated
40
JK Rock Slider End Cap - Front Driver/Rear Pass

JK Rock Slider End Cap - Front Pass/Rear Driver
JK Rock Slider Rubber Body Seal - 1 meter
633100
634100
942000
$4.99
$4.99
$6.99
Jk exterior components
JK D-RING MOUNT
JK BRAKE LIGHT EXTENSION BRACKET KIT
This unique bracket solves many of the

traditional problems that JK owners face
when adding an aftermarket bumper,
larger spare tire, spare tire carrier, and
CB antenna. The brake light extension is
completely adjustable in 1 increments to
complement tires up to 38. An integrated
CB antenna mount eliminates the need
for additional bracketry. The extension
bracket bolts to the factory spare tire
mounting holes on the tailgate, and reuses the factory wiring and light. The
4997220 kit is compatible with the JK HD
hinged carrier adjustable tire mount kit.
Many bumpers do not include a mounting

point for recovery d-ring shackles. These
universal mounts will work with most
bumpers, and mount to the factory frame
mounting points with the bumper. Sold
Individually
JK D-Ring Mount - Each
4997220
$45.99
D-RING SHACKLE
Note: Compatibility is not guaranteed with

aftermarket swing-out carriers. Stock brake
light is not included, and must be re-used from
the factory mounting bracket.
JK Brake Light Extension Bracket Kit
4803300
Complete your bumper with these

recovery d-ring shackles. The zinc plated
shackles provide an attachment for
connecting looped ends of straps and
snatch blocks. Sold individually
$82.99
JK SPARE TIRE & STOCK BRAKE LIGHT EXTENSION BRACKET KIT

JK D-Ring Shackle - Skin Packed
JK D-Ring Shackle - Boxed
4802100
4802190
$16.99
$16.99
JK SPARE TIRE RELOCATION BRACKET KIT
This extension kit allows you retain the factory spare tire mounting bracket and
third brake light with minimal modification. The spare tire relocation bracket moves
the spare tire up 1.5, enough to fit a 35 tire, and the third brake light extension
allows you to retain the factory brake light for an all inclusive kit to keep you on the
road safely. Cutting of the factory brake light bracket is required.
JK Spare Tire Extension & Brake Light Bracket Kit
4904204
$77.99
When running aftermarket wheels or

larger tires it is necessary to mount
the spare tire higher on the vehicle to
accommodate the recessed space on
the bumper, and to extend it out from
the vehicle. This simple bolt-on kit
accomplishes both of those functions.
Note: We do not recommend tires over 33 to
be mounted on this tire extension bracket when
used with the factory spare tire carrier.
JK STOCK BRAKE LIGHT EXTENSION BRACKET KIT

JK Spare Tire Relocation Bracket Kit - Skin Packed
JK Spare Tire Relocation Bracket Kit - Boxed
This simple extension allows you to

retain the factory brake light. Simply
cut the factory bracket, and bolt on the
extension piece. Cutting of the factory
brake light bracket is required.
JK Stock Brake Light Extension Bracket Kit
1907220
1907200
$38.99
$38.99
JK CB ANTENNA MOUNT KIT
4997120
$15.99
JK SPARE TIRE EXTENSION BRACKET KIT
This slim mount bracket moves the spare

tire up 1.5 to fit a 35 tire perfectly into
the tire well on the bumper.
Note: We do not recommend tires over 35 to
be mounted on the factory tailgate spare tire
bracket. Brake light extension/modification may
be necessary, use Part #4997210 or 4997120.
JK Spare Tire Extension Bracket Kit
4904200
$61.99
Easily mount a CB antenna to your JK Wrangler. This simple bracket mounts to the
JK tailgate, utilizing the factory mounting locations for the spare tire mount and can
be used with or without the factory tire mount.
JK CB Antenna Mount Kit - Skin Packed
JK CB Antenna Mount Kit - Boxed
JK CB Antenna Mount Kit Stainless - Boxed
JK CB Antenna Mount Kit Stainless - Skin Packed
4997100
4997190
4997101
4997191
$24.99
$24.99
$45.99
$45.99
41
Tj wrangler
1997 - 2006
Tj pro lcg suspension systems

TJ PRO LCG LONG FLEXARM SUSPENSION SYSTEM
FEATURES
P ium
Perrefm
ormanDcual Spor
e Syste t
m
Front upper long flexarms

4-link rear upper geometry
Eliminates rear trackbar
Low center of gravity
Maximum ground clearance
Allows complete suspension travel for full range of motion
Adjustable rear anti-squat bracketry for fine tuning performance
Designed to fit 35+ tires
HD 1-3/4 DOM lower flexarm tubing for superior strength
Designed for TJ Wranglers including the Rubicon and Unlimited
1249575
The TeraFlex Pro LCG suspension system is designed for the aggressive off-road
enthusiast that wants the best suspension performance for both rock crawling and
high speed performance. The Pro LCG system uses the TJ traditional front fivelink suspension configuration, but expands the performance. Our front upper arms
are over 9 longer than stock arms, and rear suspension is a 4-link triangulation,
eliminating the need for a rear trackbar. The rear upper bracketry features
adjustable anti-squat tunability, to fine tune suspension.
The Pro LCG system is a complete kit with all necessary componentry including
lower long flexarms, front long upper flexarms & bracketry, rear upper 4-link
long flexarms & bracketry, hardware and shocks. This complete kit will fit all TJ
Wranglers including the Rubicon and Unlimited with OEM axles (Dana 30 35 44
and Rubicon 44s). Contact a TeraFlex customer service representative for details
on applications with other high-performance axles.
1- Requires exhaust modification with new custom Cat Back
2- Full wheel alignment needed
3- CV style driveline and HD or Extreme Short Shaft SYE kit recommended
4- CV style driveline and Extreme Short Shaft SYE kit recommended
5- For Rubicon models add compressor mount plate # 4847400
6- Some welding required
7- With using stock wheels and tires over 32 in diameter wheel spacers are needed to allow
unobstructed turning, especially with Rubicon Jeep wheels
8- Transfer case lowering kit recommended for short wheelbase Rubicons.
SIMPLE BRACKETRY
The front control arm bracket

is designed to position the
flexarm in an optimal position
for highway handling and
off road performance and
clearance. The bracket is CAD
developed, CNC laser cut
and bent from 1/4 steel for
superior durability.
44
TUNED ANTI-SQUAT
The rear upper adjustable

anti-squat bracket allows the
user to customize the rear antisquat characteristics according
to their driving style, tire size &
wheelbase. Move the flexarm
up for less anti-squat, or move
it down for more anti-squat.
4 PRO LCG SUSPENSION SYSTEM

TJ 4 Pro LCG w/ 9550 Shocks
TJ 4 Pro LCG - No Shocks
1249474 $3996.99
1449474 $3731.99
TJ Unlimited 4 Pro LCG w/ 9550 Shocks

TJ Unlimited 4 Pro LCG - No Shocks
1249484 $3996.99
1449484 $3731.99
See Notes: 1 2 3 5 6 7
5 PRO LCG SUSPENSION SYSTEM

TJ 5 Pro LCG & High Steer w/ 9550 Shocks
TJ 5 Pro LCG w/ 9550 Shocks
TJ 5 Pro LCG - No Shocks
1249570 $5383.99
1249575 $3996.99
1449575 $3731.99
TJ Unlimited 5 Pro LCG & High Steer w/ 9550 Shocks 1249580 $5383.99
TJ Unlimited 5 Pro LCG w/ 9550 Shocks
1249585 $3996.99
TJ Unlimited 5 Pro LCG - No Shocks
1449585 $3731.99
See Notes: 1 2 4 5 6 7 8
TJ PRO LCG FLEXARM COMPLETE JOINT REBUILD KIT

TJ Pro LCG Flexarm Complete Joint Rebuild Kit
HD 4-LINK TRUSS
The heavy duty rear fourlink upper suspension truss

properly locates the axle under
the vehicle and is designed
to withstand the high torque
loads that get transferred to
the suspension points. The
truss is specially designed for
multiple applications.
1-3/4 DOM TUBING
TeraFlex HD flexarms are

constructed from 1-3/4 x .281
wall DOM tubing. Monster
flexarm joints allow
easy
length adjustment for fine
tuning alignment. They also
feature a 1-5/8 machined flat
area for tightening the jam nut
securely.
1952400
$336.99
TERAFLEX JOINTS
The LCG system incorporates

our heavy duty flexarm joints
that provide ultimate strength,
durability, and customization
for your specific driving needs.
The Monster arms feature 5 of
total shank length, the most in
the industry.
TJ enduro LCG Suspension Systems

TJ ENDURO LCG LONG FLEXARM SUSPENSION SYSTEM
1249472
TJ 3 Enduro LCG w/ 9550 Shocks

TJ 3 Enduro LCG - No Shocks
1249372 $2876.99
1449372 $2608.99
TJ Unlimited 3 Enduro LCG w/ 9550 Shocks

TJ Unlimited 3 Enduro LCG - No Shocks
1249382 $2876.99
1449382 $2608.99
TJ 4 Enduro LCG w/ 9550 Shocks

TJ 4 Enduro LCG - No Shocks
1249472 $2876.99
1449472 $2608.99
TJ Unlimited 4 Enduro LCG w/ 9550 Shocks

TJ Unlimited 4 Enduro LCG - No Shocks
1249482 $2876.99
1449482 $2608.99
See Notes: 1 2 3 4 5 6 7
NOTES
1- Full wheel alignment needed
2- CV Style Drive Shaft and HD or Extreme Short Shaft SYE kit recommended
3- CV Style Drive Shaft and Extreme Short Shaft SYE kit recommended
4- For Rubicon models add compressor mount plate old part# 211 new# 004847400
5- Some welding recommended
6- With using stock wheels and tires over 32 in diameter wheel spacers are needed to allow
unobstructed turning especially with Rubicon Jeep wheels
7- Transfer case lowering kit recommended for short wheelbase Rubicons
FEATURES
dincge
n
u
o
p
t
enrforman
Parvaeim
T l pe
Low center of gravity, with maximum ground clearance

Highway handling & maneuverability increased
Allows suspension travel for off-road articulation
Designed to fit 33+ tires
HD 1-3/4 DOM flexarm tubing for superior strength
HD monster joints for strength, adjustability, and customization
Designed for TJ Wranglers including the Rubicon and Unlimited
The TeraFlex Enduro LCG suspension system is designed for the off-road
enthusiast that wants to maximize suspension performance with very little
modification to the vehicle frame. The Enduro system uses the same lower control
arms and bracketry found in the Pro LCG, but retains the factory upper control
arm bracketry. The Enduro Long flexarm system will transform your current
Wranglers handling capabilities both on and off-road. The long flexarm bracketry
allows for easy installation, and access to the transfer case without disassembly
of suspension components.
This system incorporates our heavy duty Monster flexarm joint assemblies and
1-3/4 DOM arms. The Enduro LCG system fits all Wrangler models including the
Rubicon and Unlimited.
UPGRADE TO
LCG performance
TJ ENDURO LCG LOWER LONG FLEXARM KIT
TERAFLEX YOUTUBE TECH VIDEO
Proper TJ Alignment training
Upgrade from a short arm system to an Enduro LCG suspension system. This
upgrade includes all brackets and items necessary to complete a lower Long
flexarm system.
TJ Lower Long Flexarm Kit w/ Brackets
TJ Unlimited Lower Long Flexarm Kit w/ Brackets
1447700 $1506.99
1447780 $1532.99
A complete 4 wheel alignment is

critical in making any modified Jeep
drive correctly. Follow along with
our YouTube tech videos (a 3 part
series) to see the basic training steps
in a proper TJ alignment. The series
explains the basics of toe-in, caster
angle, pinion angle, thrust angle, and
axle centering.
TJ PRO LCG FRONT UPPER LONG FLEXARM KIT

Upgrade your Enduro LCG to a Pro LCG kit. This upgrade includes all items
necessary for a front Long flexarm upper 5-link system.
TJ Pro LCG Front Upper Long Flexarm Kit w/ Brackets 1443470
$595.99
TJ PRO LCG REAR UPPER LONG FLEXARM KIT

Check out the TeraFlex YouTube Channel
www.youtube.com/teraflexsuspensions
Upgrade your Enduro LCG to a rear upper LCG kit. This upgrade includes all items
necessary for a rear Long flexarm upper 4-link triangulation system.
TJ Pro LCG Rear Upper Long Flexarm Kit
TJ Unlimited Pro LCG Rear Upper Long Flexarm Kit
1444870
1444880
$992.99
$992.99
45
Tj suspension systems
TJ 4 SUSPENSION SYSTEM WITH 8 FLEXARMS
1456452
TJ 4 8 Flexarm System w/ 9550 Shocks

TJ 4 8 Flexarm System - No Shocks
1456452 $2716.99
1456450 $2446.99
The TeraFlex TJ 4 suspension system will give you the capability to conquer some
of the toughest trails out there. Drivability and performance are the most important
factors that are engineered and built into every TeraFlex lift kit. Properly developed
suspension geometry, roll center, and load tuning ensure that all TeraFlex kits drive
straight and will crawl anything, getting you there and back!
This system includes a 4 lift kit, upper and lower flexarms, front adjustable
trackbar, front swaybar disconnects, rear swaybar links, rear trackbar bracket,
bumpstops, brake line extension brackets and all necessary hardware. This kit will
allow you to run up to a 35 tire.
This system includes a 4 lift kit, lower flexarms, front swaybar disconnects, rear
swaybar links, rear trackbar bracket, bumpstops, brake line extension brackets,
and all necessary hardware. This kit will allow you to run up to a 35 tire.

1456432 $1834.99
1456430 $1565.99
1456432
TJ 4 LIFT KIT
This system includes a 4 lift kit, dropped pitman arm, front swaybar disconnects,
rear swaybar links, rear trackbar bracket, bumpstops, brake line extension
brackets, and all necessary hardware. This kit will allow you to run up to a 35 tire.
TJ 4 Lift Kit w/ 9550 Shocks

TJ 4 Lift Kit - No Shocks
TJ 4 Lift Kit - No Shocks, No swaybar disconnects
1241450
1141450
1141400
$985.99
$848.99
$718.99
46
Tj suspension systems
The TeraFlex TJ 3 lift kit is the most popular TJ lift kit on the market and delivers
everything that you need to tackle some serious trails. Drivability and performance
are the most important factors that are engineered and built into every TeraFlex lift
kit. Properly developed suspension geometry, roll center, and load tuning ensure
that each TeraFlex kits drives straight and will crawl anything, getting you there
and back!
This system includes a 3 lift kit, upper and lower flexarms, front adjustable trackbar,
front swaybar disconnects, rear swaybar links, rear trackbar bracket, bumpstops
and all necessary hardware. This kit will allow you to run up to a 33 tire.
1456352

1456352 $2472.99
1456350 $2202.99
This system includes a 3 lift kit, lower flexarms, front swaybar disconnects, rear
swaybar links, rear trackbar bracket, bumpstops and all necessary hardware. This
kit will allow you to run up to a 33 tire.

1456332 $1754.99
1456330 $1485.99
1456332
TJ 3 LIFT KIT
This system includes a 3 lift kit, front swaybar disconnects (not included in
1141300), rear swaybar links, rear trackbar bracket, bumpstops and all necessary
hardware. This kit will allow you to run up to a 33 tire.

TJ 3 Lift Kit - No Shocks, No swaybar disconnects
1241350
1141350
1141300
$906.99
$729.99
$638.99

1241350
47
Tj lift kits
TJ 2 LIFT KIT

1241200
1141200
$862.99
$595.99
The 2 lift kit is a perfect way to add performance without the requirement of
additional modifications. This kit includes a 2 lift kit, rear trackbar bracket,
bumpstops and all necessary hardware. This kit will allow you to run up to a 31
tire.
TJ 2 BUDGET BOOST LIFT KIT
This kit is the most economical solution to lifting your Wrangler. The budget boost
will provide enough lift to run a 31x10.50 tire. The budget boost will provide two
inches of lift when combined with factory rubber insulators (1.5 without).
TJ 2 Budget Boost - Boxed

TJ 2 Budget Boost - Skin Packed
TJ 2 Budget Boost w/9550 Shocks
1341200
1341220
1245200
$133.99
$133.99
$399.99
TJ 1 BODY LIFT KIT
1942100
1942101
A one inch body lift can be one of the most useful upgrades on a Wrangler. It
increases room for larger tires, high clearance skid plates, etc. Our body lift
includes 1 spacers, shift linkage plate and all necessary hardware.
48
TJ 1 Body Lift Kit - Aluminum

TJ 1 Body Lift Kit - UHMW
1942100
1942101
$187.99
$133.99
31"
31"
31"
31"
31"
33"
33"
33"
33"
33"
33"
35"
35"
35"
35"
35"
35"
35"
35"
35"
37"
37"
37"
37"
Lift Height
1"
2"
2"
2"
3"
3"
3"
3"
3"
3"
4"
4"
4"
4"
4"
4"
4"
4"
4"
5"
5"
5"
5"
Part #
1249585
1449585
1249575
1449575
1249484
1449484
1249474
1449474
1449482
1249482
1249472
1449472
1141400
1249382
1449382
1249372
1449372
1241300
1141300
1241200
1141200
1341200
1942101
1942100
Suspension Lift
Type
Pro LCG System
Pro LCG System
Pro LCG System
Pro LCG System
Pro LCG System
Pro LCG System
Pro LCG System
Pro LCG System
Enduro LCG System
Enduro LCG System
Enduro LCG System
Enduro LCG System
Lift Kit
Enduro LCG System
Enduro LCG System
Enduro LCG System
Enduro LCG System
Lift Kit
Lift Kit
Lift Kit
Lift Kit
Spacer Lift
UHMW Body Lift
Aluminum Body Lift
Vehicle Fit
TJ - Unlimited
TJ - Unlimited
TJ
TJ
TJ - Unlimited
TJ - Unlimited
TJ
TJ
TJ - Unlimited
TJ - Unlimited
TJ
TJ
TJ - All
TJ - Unlimited
TJ - Unlimited
TJ
TJ
TJ - All
TJ - All
TJ - All
TJ - All
TJ - All
TJ - All
TJ - All
Shocks
9550
9550
9550
9550
9550
9550
9550
9550
9550
Springs
X
Lift Spacers
X
Long (8)
Long (8)
Long (8)
Long (8)
Long (8)
Long (8)
Long (8)
Long (8)
Long (4)
Long (4)
Long (4)
Long (4)
Long (4)
Long (4)
Long (4)
Long (4)
FlexArms
Please note that not all items are included in this application chart. This is not an inclusive list of all kit items. Many items are omitted.
Max Tire Size
1"
Front Trackbar
X
Rear Trackbar
Bracket
X
Front Sway Bar

Disconnects
X
Rear Swaybar
Links
X
Front Brake Lines
TJ Wrangler TeraFlex Lift Kit & Suspension System Application Chart

Rear Brake Lines
X
Front Bumptsop
Extensions
X
Rear Bumpstop
Extensions
X
Steering Box
Skidplate
X
BellyUp Skidplate
X
Tj lift application chart
49
TJ Wrangler 1997-2006
Tj teraflex vss shocks

TJ 9550 VSS SHOCK ABSORBERS
SHOCK FEATURES
Twin tube design is a more robust and rugged design geared toward
heavy duty off-road abuse
The outer tube protects the inner tube from damage, so if you dent
the outer tube, the shock will still function
Longer stroke travel with twin tube design
Velocity valve tuned to react perfectly with TeraFlex suspensions
Large diameter piston lowers internal operating temperatures
Travel limiter minimizes the impact of over-compression
Oil block and seal keep all internal fluids contained and sealed
Heavy-duty shock canister provides strong protection from damage
Durable black e-dipped finish resists salt and other corrosives
Induction-hardened, triple-chrome plated rod provides strength
Double-welded shock eyelets reinforce and support.
Jeep specific bar pin
We created an exceptional shock absorber designed and developed specifically

for Jeep vehicles. This means you get the best extreme off-road performance and
unequaled highway ride because it is designed specifically for your Jeep.
You will find premium-quality rubber bushings with Jeep specific bar pins, and a
resistant black finish that will withstand the most extreme off-road abuse.
The VSS gas shock uses a twin-tube design, with triple-chromed rod to ensure
extended trouble-free operation. This shock is all performance and packed with
features for extreme durability.
Shocks are sold individually, unless specified otherwise.
2 - 3 LIFT
TJ 2-3 9550 VSS Shocks - All 4
TJ 2-3 Front 9550 VSS Shock - Each
TJ 2-3 Rear 9550 VSS Shock - Each
1545270
1543223
1544223
$267.99
$66.99
$66.99
1545370
1543334
1544334
$267.99
$66.99
$66.99
1549500
1543556
1544556
$267.99
$66.99
$64.99
3 - 4 LIFT
5 - 6 LIFT
Install Time: 1 hour (all 4 shocks)
HEAVY DUTY ROD

& OIL SEAL
50
WRANGLER SPECIFIC
MOUNTING STEM
WRANGLER SPECIFIC
BAR PIN
DOUBLE WELDED
EYELET
CUSTOM VALVED TWIN

TUBE
Tj shock application chart

A
Extended Length
C
Compressed Length
B
Travel
D
Unloaded Bushing Height
Stem-Loop Shock
Dimension
E
Extended Length
G
Compressed Length
F
Travel
Loop-Loop Shock
Dimension
Shock Application Information
Front Part Number Rear Part Number
TJ
Wrangler
1997-2006
Vehicle
Lift
Shock
Manufacture
A
Extended
Length
(in)
Front Stem-Loop
B
Travel
(in)
D
C
Compressed Unloaded
Bushing
Length
Height (in)
(in)
Rear Loop-Loop
E
Extended
Length
(in)
F
Travel
(in)
G
Compressed
Length
(in)
1543223
1544223
TJ with 2.5"-3" of Lift
TeraFlex
23.020
9.300
13.720
0.870
22.600
8.880
13.720
1543334
1544334
TJ with 3"-4" of Lift
TeraFlex
24.700
10.180
14.520
0.870
24.840
10.020
14.820
1543556
1544556
TJ with 5"-6" of Lift
TeraFlex
27.640
11.630
16.010
0.870
27.090
11.080
16.010
TJ 9550 VSS STEERING STABILIZER
This steering stabilizer is designed to work with modified suspensions and larger
off-road tires to reduce bumpsteer, front end shimmy or wobble. The larger
diameter shock tube is superior to the factory damper and is designed for the
additional stress and requirements of an off-road vehicle. The oversized 2 body
and 5/8 hardened chrome rod allow for a heavy duty upgraded premium seal to
prevent pressure loss. An integrated dust shield protects the shock rod from high
impact salt and sand damage.
TJ 9550 VSS Steering Stabilizer
1513001
$56.99
TJ STEERING STABILIZER MOUNTING KIT

TJ SHOCK BAR PIN ELIMINATOR
1204800
Increases your shock options by

eliminating the need for a bar pin, and
forget about replacing broken bar pins.
It installs simply in the place of a bar
pin with included hardware. Fits TJ
Wranglers, XJ Cherokees, and ZJ Grand
Cherokees.
Note: This part can change the length
requirements of the shock by as much
as one inch.
TJ Front Lower Shock Bar Pin Eliminator Kit

TJ Rear Upper Shock Bar Pin Eliminator Kit
1203700
1204800
$25.99
$25.99
This bracket kit is designed to work with

our aluminum hex tie-rod & drag link
tubing used in our high steer kit. Combine
this kit with the above steering stabilizer
to complete your steering system.
TJ Steering Stabilizer Mounting Kit - Skin Packed

TJ Steering Stabilizer Mounting Kit - Boxed
TJ Front Upper Shock Stem Eliminator Kit
1203800
$28.99
$52.99
$52.99
TJ REAR LOWER SHOCK EXTENSION KIT
TJ FRONT UPPER SHOCK STEM ELIMINATOR

This kit converts the front upper shock
mount to a loop-loop shock, making
possible the use of a wider range of
shocks and lengths.
Fits front upper TJ Wranglers, XJ
Cherokees, and ZJ Grand Cherokees.
Note: This part can change the length
as one inch.
1510000
1510090
The TJ rear shock mount extensions

install into the factory shock locations
and move the shock canister away from
the spring pad. This minimizes shock
canister damage and allows for axle
rotation on lifted TJ Wranglers.
Note: This kit will change the length
as one inch.
TJ Rear Lower Shock Extension Kit - Skin Packed
TJ Rear Lower Shock Extension Kit - Boxed
1544700
1544790
$39.99
$39.99
51
Tj lift kit components

TJ COIL SPRINGS
TJ SPRING SPACER
These spacers are perfect
to level your Jeep from
sagging or from extra
weight caused by heavy
loads or accessories.
Sold individually.
1905122
TJ 3/4 Spring Spacer - Each
1905172
$22.99
TJ 2 Budget Boost Spacer - Each
1905122
$25.99
TJ SUSPENSION BUMPSTOP
TJ 2 COIL SPRINGS
2 TJ front springs - pair
2 TJ rear springs - pair
1843202
1844202
$214.99
$214.99
1843302
1844302
$214.99
$214.99
TJ 3 COIL SPRINGS
TJ 4 COIL SPRINGS
1843402
1844402
$214.99
$214.99
1843502
1844502
$214.99
$214.99
TJ 5 COIL SPRINGS
1949011
1910234
1910204
TJ 3-4 Front Lower Bumpstop Kit 2.25 Tall

TJ LCG Front Upper Bumpstop Kit 2.25 Tall
1910234
1910204
$30.99
$37.99
TJ 3 Rear Upper Bumpstop Kit 1.5 Tall

TJ 4 Rear Upper Bumpstop Kit 2.25 Tall
TJ LCG Rear Lower Bumpstop Kit 1.75 Tall
1910111
1910204
1949011
$25.99
$37.99
$78.99
TJ SHIFT LINKAGE PLATE
1900001
1997-2002
1900003
2003-2006
A shift linkage plate may be necessary to properly locate your transfer case
linkage when a body lift is used on TJ Wranglers. Because the linkage mounting
is different depending on model years, be sure to specify the proper model year.
TJ 97-02 Shift Linkage Plate
TJ 03-06 Shift Linkage Plate
1900001
1900003
$25.99
$22.99
TJ TRANSFER CASE LOWERING SPACER KIT

This kit lowers the transfer
case one inch to help control
driveline vibration caused
by increased ride height in
excess of two inches.
1900100
TJ 97-02 1/2 Transfer Case Lowering Spacer Kit

TJ 97-02 1 Transfer Case Lowering Spacer Kit
TJ 03-06 1 Transfer Case Lowering Spacer Kit
52
1900000
$31.99
1900100
$54.99
1900103
$54.99
Tj speedbump bumpstops
Quiet movement & function (no pad-slap clunk)
Maintenance free, all-composite construction
Resistant to all types of conditions (mud, salt, sand, dust, etc.)
Engineered for maximum lifetime compression cycle
Unsurpassed dynamic performance
Subzero temperature flexibility reduces fatigue
Patented technology
Patented
Design
CNC
machined
aluminum
clamping
collar
PAT. #8272653
Closed-cell
nitrogen
charged
microcellular
Foam
TJ FRONT SPEEDBUMP BUMPSTOP KIT
CNC
machined
aluminum
Housing
Note: 4 of lift is required for this kit. Cutting & welding is required. Bracket replaces factory
front jounce tube. OEM rubber spring isolator included.
Integrated
Delrin
Sliding
piston
TJ Front SpeedBump Bumpstop Kit
$398.99

TJ Front SpeedBump Mounting Bracket Kit
Delrin shaft
support
Bushing
1958700
4943800
$28.99
TJ REAR SPEEDBUMP BUMPSTOP KIT
Extreme
conditions
external
wiper seal
Delrin
acetal resin
polymer
shaft
Delrin
Bumpstop
foot
Limited
lifetime
warranty
Note: 4 of lift is required for this kit. Cutting & welding is required. Bracket replaces factory
rear upper spring bracket. OEM rubber spring isolator included.
TJ Rear SpeedBump Bumpstop Kit
MAINTENANCE
FREE COMPOSITES
$408.99

TJ Rear SpeedBump Mounting Bracket Kit
PERFORMANCE
TUNED
1958720
OEM STYLE FITMENT
ALL CONDITION
RESISTANCE
4944800
$47.99
EXTENDED WHEELBASE
CAPABLE
53
Tj s/t swaybar system

TJ DUAL RATE FORGED S/T SWAYBAR
The dual rate S/T swaybar system gives you the best of both worlds. Engaged in
the street position, the bar allows for a stable highway drive. Disconnected in the
trail position, it allows your vehicle to articulate and your tires to bite despite the
terrain with balanced suspension travel.
The dual rate features two torsion bars, one for heavy duty highway handling and
one tuned for off-road articulation. The trail swaybar offers some resistance, but
just enough to limit excessive body roll when in off camber and sidehill situations.
To disengage the swaybar with the S/T system, simply twist a knob and you are
on your way. To re-engage, rotate the knob again and the swaybar will self engage
when the vehicle is level.
TJ 0-3 Front Dual Rate Forged S/T Swaybar
TJ 4-6 Front Dual Rate Forged S/T Swaybar
1743620
1743625
$880.99
$880.99
TJ SINGLE RATE FORGED S/T SWAYBAR
The TeraFlex S/T swaybar system is a simplified version of the dual rate. It provides
the superior highway swaybar for street driving with no resistance off-road when
disconnected. The S/T swaybar system is designed for those that do not want any
torsion resistance when off-road.
A simple twist of the knob releases the torsion bar, and allows unrestricted
movement. Simply twist again, and you are ready for the highway!
TJ 0-3 Front Single Rate Forged S/T Swaybar
TJ 4-6 Front Single Rate Forged S/T Swaybar
1743610
1743615
$644.99
$644.99
TJ TRAIL RATE FORGED S/T SWAYBAR
The TeraFlex trail S/T swaybar system provides trail-tuned torsion resistance when
off-road. This swaybar does not have a disconnect, and is always connected/
engaged. This swaybar is adequate for street use but does not provide the same
amount of anti-roll characteristics as the factory rear swaybar. Wheels must have
4.5 or less backspacing.
FRONT
TJ 0-3 Front Trail Rate Forged S/T Swaybar
TJ 4-6 Front Trail Rate Forged S/T Swaybar
1743600
1743605
$439.99
$439.99
REAR
The Trail S/T Swaybar is NOT recommended for street use, and is intended for trail
use only (this swaybar does not provide adequate highway anti-roll characteristics).
HD STREET TUNED
EXTERNAL SWAYBAR
The heavy duty street

swaybar is designed to offer
more resistance than the
stock swaybar for superb
highway control and handling.
The torsion bar is constructed
of 35 spline, heat treated
4130 chromoly steel for
fatigue resistance.
54
TJ 0-3 Rear Trail Rate Forged S/T Swaybar

TJ 4-6 Rear Trail Rate Forged S/T Swaybar
TRAIL TUNED
INTERNAL SWAYBAR
INTERNAL BUSHING
ELIMINATES WEAR
FORGED HIGH
CLEARANCE ARM
The trail swaybar is designed

to offer the perfect amount
of anti-roll when off-road.
This keeps the Jeep stable
and allows side hills and off
camber maneuvers without
loss of vehicle control.
Constructed of 22 spline, heat
treated 4340 chromoly steel.
The dual rate S/T features an

internal bushing that allows
both swaybars to rotate
independently of each other
when in the trail position. The
bushing eliminates any play
for tight working tolerances.
The forged high clearance

swaybar arm allows for
maximum wheel travel during
articulation and eliminates
most tire interference with
the swaybar. The forged arm
increases overall strength,
especially
side
loading
situations during articulation.
1744600 $449.99
1744605 $449.99
QUICK RELEASE &

ENGAGEMENT KNOB
The
swaybar
knob
is
ergonomically designed to
make engagement and disengagement a breeze. No
dirty or greasy hands. Just
rotate clockwise for trail use,
and counter-clockwise for
street use.
Tj swaybar disconnects
TJ FRONT SWAYBAR QUICK DISCONNECT KIT
TJ FRONT SWAYBAR QD REPLACEMENT PARTS
600499
600491
600504
3/4 Lower Stud Kit w/ Washer, Nut & Hitch Pin Clip 1943705
3/4 Lower Stud
600499
5/8 Upper Stud
600503
Hitch Pin Clip
600504
TJ Swaybar Link U-Bracket Stud & Hardware
1943867
TJ 0-2 Lift Driver 8 Swaybar Link w/ U-Bracket Stud 600493
TJ 0-2 Lift Pass. 8 Swaybar Link w/ U-Bracket Stud 600494
TJ 3-6 Lift Driver 10 Swaybar Link w/ U-Bracket Stud 600491
TJ 3-6 Lift Pass. 10 Swaybar Link w/ U-Bracket Stud 600492
$16.99
$13.99
$10.99
$1.99
$5.99
$33.99
$33.99
$33.99
$33.99
S/T SWAYBAR KNOB WRENCH
silent function with ease of use. The upper swaybar link end has a polyurethane
ball for long term durability and silent function. The lower swaybar link end has a
large polyurethane ball and pin for easy swaybar link removal. When connected for
street use the link provides immediate reaction during swaybar loading to eliminate
excess play. This results in improved lateral control and steering response
compared to the stock rubber swaybar link bushings.
for unrestricted axle articulation. Fits all TJ Wrangler models including Rubicon
and Unlimited.
TJ 0-2 Front Quick Disconnect Kit - Skin Packed
TJ 0-2 Front Quick Disconnect Kit - Boxed
1743012
1743092
$126.99
$126.99
TJ 3-6 Front Quick Disconnect Kit - Skin Packed

TJ 3-6 Front Quick Disconnect Kit - Boxed
1743010
1743090
$126.99
$126.99
TJ SHIFT LINKAGE ADAPTER KIT

Indexed Wrench Detail
This light-duty wrench will help give you just enough leverage to easily turn the
knob on your S/T swaybar system. The indexed wrench is designed to provide
additional leverage for those that have limited hand strength or are not able to grip
the knob adequately.
Note: This wrench is not intended to be used as a high-torque method of disconnecting
the swaybar. It must only be used when the vehicle is in a neutral (flat) position, and slight
leverage is needed.
S/T Swaybar Knob Wrench
753333
$10.99
check out our website
This shift link adapter kit will make

shifting your 231 into all low range
sectors simple. This adapter kit
changes the trouble prone stock
linkage which is not reliable due
to independent body & drivetrain
movement. The new bracket is bolted
to the transmission & transfer case
eliminating any negative movement.
The heavy duty adapter kit is designed
to provide problem free shifting even
under extreme conditions. Fits 97-06
automatic transmissions. Does not fit
Rubicon models.
An extra long threaded adjustable
turnbuckle shift linkage rod (947105) is available separately and highly
recommended for longer linkage adjustment. An adjustable torque shaft rod
(947120) is also available to fine tuning the linkage to cabin lever distance.
Note: This kit is designed for automatics, but can be modified to fit manual transmissions. This
adapter will require extensive modifications to fit an AX-15.
TJ 97-02 Shift Linkage Adapter Kit
4947100
$93.99
TJ 5.5 Adjustable Shift Linkage Rod
947105
$9.99
TJ Adjustable Torque Shaft Rod
947120
$33.99
55
Tj flexarms
TJ LOWER FLEXARM KIT
TJ 8 FLEXARM KIT
Factory length= 15-3/4

1 1/4-12 UNF Thread
Sold In Pairs
TJ Lower Flexarm Kit
1615700 $351.99
TJ Lower Flexarm - Single
1615710
$175.99
Large Flexarm Joint

4116260
1951000
4915161
$66.99
$27.99
$20.99
The 8 flexarm System Kit is designed for short arm applications looking for heavy
duty performance. This kit comes with all 8 Monster flexarms (front and rear lower,
front and rear upper) This flexarm kit is designed to work with all lift kits up to 3 of
lift (including other manufacturers lift kits). Fits all TJ Wrangler models including
the Rubicon and Unlimited.
TJ 8 Flexarm Kit
TJ FRONT UPPER FLEXARM KIT

Max Length= 17-3/16
7/8-18 UNS Thread
1615000 $1422.99
TJ SHORT FLEXARM COMPLETE JOINT REBUILD KIT
Sold In Pairs
TJ Front Upper Flexarm Kit
1613800 $347.99
TJ Front Upper Flexarm - Single
1613810
$173.99
Small Flexarm Joint

Small Flexarm Joint Rebuild Kit
4116230
1951100
$60.99
$22.99
1952500
This complete rebuild kit includes all flexarm joint rebuild components and Clevite
bushings required to completely rebuild your TeraFlex flexarms. Part #1952600
rebuilds 4 arms - front and rear lower flexarms.
TJ Short Flexarm Complete Joint Rebuild Kit - 8 Arms 1952500
TJ Lower Flexarm Complete Joint Rebuild Kit - 4 Arms 1952600
TJ REAR UPPER FLEXARM KIT
$308.99
$183.99

Min. length= 13
Max length= 14-3/8
7/8-18 UNS thread

sockets.
Sold In Pairs
TJ Rear Upper Flexarm Kit
1614800 $373.99
TJ Rear Upper Flexarm - Single
1614810
$185.99
Small Flexarm Joint

Small Rubber Joint
4116230
1951100
600453
$60.99
$22.99
$17.99

1951300
1951350
$28.99
$27.99
BUSHING REPAIR KITS - STANDARD LOWER FLEXARMS
TJ ORIGINAL LOWER FLEXARM KIT

4106401
4106416
Stock Length= 15-3/45

Min. Length= 15
Max Length= 16-1/2
Sold in pairs
56
TJ Original Lower Flexarm Kit
1615766 $195.99
TJ Original Lower Flexarm - Single
1615767
$97.99
Replace or repair your used flexarm bushings and sleeves. These kits are
designed to repair one arm, or a complete set of four arms.
Bushings are made from polyurethane, and sleeves are zinc plated steel for
corrosion resistance.
Standard Lower Flexarm Bushing Repair Kit - 1 Arm 4106401
Standard Lower Flexarm Bushing Repair Kit - 4 Arms 4106416
Standard Upper Flexarm Bushing Repair Kit - 1 End 4106501
$19.99
$82.99
$9.99
TJ LONG FLEXARM UPGRADE KIT
TJ FRONT UPPER LONG FLEXARM KIT

min. length= 22-1/2
max length= 24 7/8
Uses 7/16 [12mm] bolt,
7/8-18 UNS thread,
1 1/8 wrench on tube,
1 1/4 wrench on jam nut.
sold in pairs
TJ Front Upper Long Flexarm Kit - Pro LCG
1613801 $344.99
TJ Front Upper Long Flexarm Pro LCG - Single
1649839
$176.99
Small Flexarm Joint

4116230
1951100
$60.99
$22.99
The TJ Long flexarm Upgrade Kit utilizes the lower components found in our highend LCG systems, . The kit comes with frame brackets, and four lower flexarms
with Monster joints. Specify Wrangler or Unlimited.
TJ REAR UPPER LONG FLEXARM KIT

min. length= 31-9/16
max length= 36-3/16
1 1/4-12 UNF thread,
TJ Long Flexarm Upgrade Kit w/ Brackets

TJ Unlimited Long Flexarm Upgrade Kit w/ Brackets
1447700 $1506.99
1447780 $1532.99
sold in pairs
TJ PRO LCG LONG FLEXARM BRACKETS

TJ Rear Upper Long Flexarm Kit - 4-Link
TJ Unlimited Rear Upper Long Flexarm Kit - 4-Link
1447712
1447707
$563.99
$599.99

TJ Rear Upper Long Flexarm 4-Link - Single
14477121 $289.99
TJ Unlimited Rear Upper Long Flexarm 4-Link - Single 1649880 $306.99
Large Flexarm Joint
4116260
1951000
$66.99
$27.99
TJ LOWER LONG FLEXARM KIT
These brackets are used in the Pro LCG suspension system, but can be used for
fabricators looking to customize their suspension needs on various applications.
TJ LCG Lower Long Flexarm Frame Bracket Kit

TJ Pro LCG Front Upper Bracket - Driver
TJ Pro LCG Front Upper Bracket - Passenger
TJ Pro LCG Rear Upper Bracket - Driver
TJ Pro LCG Rear Upper Bracket - Passenger
TJ Pro LCG Rear 4-link Axle Truss

max length= 36-3/16
1447701
9791
9792
97881
97882
1944044
$414.99
$50.99
$50.99
$70.99
$70.99
$293.99
sold in pairs
TJ Lower Long Flexarm kit
1447702 $546.99
TJ Lower Long Flexarm - Single
1978226
$279.99
Large Flexarm Joint

4116260
1951000
4915161
$66.99
$27.99
$20.99
TJ UNLIMITED REAR LOWER LONG FLEXARM KIT

max length= 44-1/16
sold in pairs
TJ Unlimited Rear Lower Long Flexarm Kit
1447704
$581.99

TJ Unlimited Rear Lower Driver Long Flexarm - Single 1644781
TJ Unlimited Rear Lower Pass Long Flexarm - Single 1644782
Large Flexarm Joint
4116260
1951000
4915161
$297.99
$297.99
$66.99
$27.99
$20.99
57
Tj Trackbars
TJ FRONT ADJUSTABLE TRACKBAR KIT
TJ HIGH STEER TRACKBAR KIT
Fine tune the front suspension to eliminate bump steer without drilling holes with
a new adjustable front trackbar. The trackbar bushing is designed to reduce the
effects of front wheel shimmy, improve durability and tunability. Fits TJs, XJs, and
ZJs. This product will not work on stock vehicles, a minimum of 3 lift is required.
TJ Front Adjustable Trackbar Kit
1743022 $219.99
4313320
$17.99
TJ Front Trackbar Bushing
TJ REPLACEMENT FRONT TRACKBAR BUSHING

Replace a worn out stock trackbar
bushing to restore it to the original
damping performance. This bushing
uses the same OE style rubber, with an
additional rate plate for superior control,
handling and responsiveness.
TJ Front Trackbar Bushing
4313320
The high steer trackbar kit is designed to be used in conjunction with our high
steer kit. This kit will allow you to fine tune the drag link & trackbar angles to
eliminate and correct bumpsteer or other front end issues. The kit includes an
upper frame bracket, lower axle bracket, and adjustable trackbar. Both brackets
feature multiple mounting holes to fine tune for lift height and trackbar position.
This kit is designed to put the trackbar parallel with the drag link.
TJ High Steer Trackbar Kit
4923200
TJ High Steer Front Trackbar

TJ High Steer Trackbar Bracket Kit - Frame End
TJ High Steer Trackbar Bracket Kit - Axle End
4923202
1743031
1943070
$492.99

$225.99
$177.99
$102.99
PROPER HIGH STEER & TRACKBAR CONFIGURATION
$17.99
TJ REAR ADJUSTABLE TRACKBAR KIT
The rear adjustable trackbar adjusts to center the rear tires under your TJ. The
design rotates to reduce trackbar binding and increase rear wheel droop. It
features a greaseable zerk fitting to lube the moving parts. Fits all Wrangler models
including the Rubicon and Unlimited.
TJ Rear Adjustable Trackbar Kit
1744000
$222.99

TJ Rear Trackbar Joint Rebuild Kit
4115102
Proper axle component alignment will help to eliminate bumpsteer and other steering issues
common on lifted vehicles with a high steer system. The key is to make the trackbar and drag
link as parallel as possible.
TJ 5+ PRO LCG FRONT TRACKBAR
$52.99
TJ REAR TRACKBAR BRACKET KIT
Use the rear trackbar bracket to restore

the trackbars position and maintain the
handling performance. Helps eliminate
tail wag. Fits all Wrangler models
including Rubicon and Unlimited.
The Pro LCG trackbar is designed for 5+ of lift and must be used with the trackbar
frame drop bracket (#1743031). This trackbar cannot be used with the high steer
kit.
TJ Pro Trackbar (Works With 1743031 Bracket Only) 1743070
$209.99
TJ HIGH STEER SWAYBAR MOUNT
TJ Rear Trackbar Bracket Kit
Raise
the
swaybar
mount up and out of the
way to make clearance
for
custom
steering
components. The mount
is laser cut and formed
from 3/8 steel for
durability and strength.
Applications for Dana 30
& Dana 60 axles
1944000
$85.99
TJ DROP PITMAN ARM

The drop pitman or steering arm is used
to correct steering geometry on vehicles
with 3.5 or more inches of lift. Fits all
Wrangler models - YJ & TJ including
Rubicon and Unlimited.
TJ Drop Pitman Arm
58
TJ Dana 30 High Steer Swaybar Mount - Driver

TJ Dana 30 High Steer Swaybar Mount - Passenger
4959101
4959102
4922133
$64.99
$52.99
$52.99
Tj high steer components

TJ PRO LCG DANA 30 HIGH STEER SYSTEM
TJ HIGH STEER TIE ROD END REPLACEMENT KIT
This replacement kit includes two tie rod ends, two drag link ends, and 3 tapered
sleeves. This will allow the tie rod to be flipped over the knuckle to increase
ground clearance and provide additional protection for the tie-rod and give an
additional 3 of tie rod clearance.
If flipping the tie rod, this kit will require drilling the driver side knuckle taper to a
3/4 hole. This upgrade will only work with the TeraFlex High Steer Kit, or users
with the TeraFlex High Steer knuckle.
1849000
TJ High Steer Tie Rod End Replacement Kit
4923300
$274.99
TJ HEAVY DUTY TIE ROD ENDS

The TeraFlex high steer system is designed to be used with our top of the
line suspension system, the Pro LCG, and will beef up the essential steering
components of your Dana 30 front axle. This kit also helps to maximize steering
component ground clearance and assist in easy correction of steering geometry.
Note: The high steer system is not an all inclusive kit. Additional modifications
will be required that are not included in the TeraFlex high steer system. These
modifications may include front swaybar links, front trackbar mounting, and offset
wheels. Will work with 15 wheel with 3.5 or less backspacing.
TJ High Steer Kit w/ Pro LCG System
1849000
$891.99
Kit includes: complete tie rod & drag link with one-ton tie rod ends, tapered inserts,
pitman arm, high steer knuckle, swaybar mounts, and swaybar links.
TJ High Steer Kit for 4+ Lift
1813000
$701.99
Kit includes: complete tie rod & drag link with one-ton tie rod ends, tapered inserts, high
steer knuckle (does NOT include pitman arm, swaybar mounts, or swaybar links).
TJ High Steer Knuckle Kit
4828490
$433.99
Fits 94+ Jeep Wrangler Dana 30 axles. This is a knuckle only kit and includes:
high steer knuckle, and three tapered inserts.

4959101
4959102
$52.99
$52.99

TJ Steering Stabilizer Mounting Kit
1510000
Large Taper
Stock Taper
Offset Stock Taper
These heavy duty tie rod ends utilize a one-ton joint end, and are available in either
a stock Jeep taper or a large one-ton taper (standard Dana 60).
The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the
larger 60 type knuckles, as are used in the Tera CRD60 axle line. Additionally the
tie rod ends are available with an offset (for use with applications where differential
interference may occur with the tie rod).
Large Taper Tie Rod End - Left Hand Thread
Large Taper Tie Rod End - Right Hand Thread
Offset Large Taper Tie Rod End - Left Hand Thread
Offset Large Taper Tie Rod End - Right Hand Thread
Stock Taper Tie Rod End - Left Hand Thread
Stock Taper Tie Rod End - Right Hand Thread
Offset Stock Taper Tie Rod End - Left Hand Thread
Offset Stock Taper Tie Rod End - Right Hand Thread
Replacement Boot
These tapered tie rod & drag link inserts

are used in the TeraFlex TJ High Steer
Kit, and the JK Drag Link Flip Kit. The
taper matches factory tie rod ends for
simple installation. Sold Individually.
TJ HD TIE ROD & DRAG LINK ASSEMBLIES
TJ Driver Side Stock Tapered Insert - .75 O.D.

TJ Passenger/High Steer Knuckle Insert - .875 O.D.
JK Passenger Stock Tapered Insert - .8125 O.D.
Dodge One-Ton Tapered Insert - .875 O.D.
TJ Drag Link Kit - Stock Taper Ends

TJ Tie Rod Kit - Offset Taper Ends
TJ Tie Rod Kit - Stock Taper Ends
TJ Custom (60 Rough) Tie Rod Kit - Large Taper
4920244
4920251
4920255
4920299
$162.99
$236.99
$174.99
$267.99
$53.99
$53.99
$53.99
$53.99
$53.99
$53.99
$53.99
$53.99
$5.99
TIE ROD & DRAG LINK TAPERED INSERT
$52.99
The heavy duty tie rod and drag link kit is designed to upgrade any TJ, YJ, XJ, or
ZJ steering system utilizing the TeraFlex High Steer Knuckle. It is constructed of
1-1/2 hexagon 6061 T6 aluminum, which has a higher specific strength than 1018
steel. It also has a yield strength of 45000 lbs. but is 3 times lighter than steel. The
aluminum will also deflect 3 times further than steel, while returning to its original
shape. The hexagon shape makes tightening jam nuts simple by using a 1-1/2
wrench to hold the tube.
The stock taper rod ends will fit Dana 30 knuckle holes, the large taper will fit the
larger 60 type knuckles, as are used in Tera CRD60 HD axle line.
Note: This tie rod/drag link kit is intended for use with the TeraFlex Dana 30 High
Steer Knuckle.
4920201
4920202
4920287
4920288
4920221
4920222
4920231
4920232
4925100
990175
990113
990120
600242
$10.99
$12.99
$12.99
$14.99
TJ WHEEL OFFSET ADAPTER KIT
The wheel adapter will provide a 1.25

offset for factory wheels for additional
tire clearance when turning. The wheel
spacer is not intended for wheels wider
than 8 or aftermarket wheels with less
than 4 of backspacing. Sold in Pairs.
TJ Wheel Offset Adapter Kit (5x4.5 to 5x4.5) - Pair

TJ Wheel Offset Adapter Kit (5x4.5 to 5x5) - Pair
Wheel Offset Adapter Kit - 5x5.5 to 5x5.5 - Pair
1005200
1055045
1055020
$132.99
$132.99
$151.99
59
Tj Brake components
TJ REAR DISC BRAKE KIT
TJ Rear Disc Brake Kit w/ E-Brake Cables
4354425
$617.99
Complete kit - Includes everything required for a disc brake conversion, including two TJ
parking brake cables
1991-2006 Jeep Rear Disc Brake Conversion Kit
4354420
$594.99
Fits all Jeep factory rear axles from 1991 through 2006 including the Dana 35 c-clip, Dana
44 and Chrysler 8.25
84-88 XJ, 87-90 YJ Rear Disc Brake Conversion Kit
4354410
$604.99
Fits XJ Cherokee non-c-clip rear axles and XJ Cherokee D44 axles up through 1988
Will NOT fit CJs, Commandos, or other Jeep models other than the above XJ applications
Ford Disc Brake Conversion Kit
4354400
$419.99
Fits Ford 9, 8.8,and custom TeraFlex housings using the Big Ford housing ends
Ford Bronco Disc Brake Conversion Kit
4354444
$637.99
DISC BRAKE REPLACEMENT PARTS

The TeraFlex disc brake kit is ideal for anyone wanting to upgrade a quality disc
brake package to their axles. This disc brake kit is intended for use as a bolt-on
upgrade to replace factory Jeep drum brakes. A kit is also available for axles using
Big Ford housing ends, such as the TeraFlex CRD60. The internal drum parking
brake provides outstanding holding power when compared to other disc brake
conversion kits.
HEAVY DUTY CALIPER
INTEGRATED E-BRAKE
Disc Brake Hose Kit

Disc Brake Pad Kit - Complete Set of 4
Disc Brake Rotor - Each
Disc Brake Caliper - Each
Disc Brake Preload Spacer - TJ/Late Jeep
Disc Brake Preload Spacer - XJ/Early Jeep
Disc Brake Preload Spacer - Ford
SEMI-METALLIC PADS
JEEP BOLT PATTERN
4355400
8624
8622
862300
86261
86262
8636
$78.99
$43.99
$66.99
$109.99
$9.99
$16.99
$7.99
PERFORMANCE ROTOR
EMERGENCY BRAKE CABLE KIT
These DOT approved stainless steel

braided brake lines are designed for
most late model Jeep applications.
These stainless line kits will prevent line
expansion, thereby giving a much firmerfeeling pedal. All stainless brake lines are
made to MVSS-1006 specifications.
TJ Front & Rear Stainless Braided Brake Line Kit
4350400
TJ 26 Front Stainless Braided Brake Line Kit
4353310
TJ 26 Rear Stainless Braided Brake Line Kit - Single 4354200
$162.99
$100.99
$55.99
This kit will provide your TJ Wrangler

rear disc brake conversion with a new
emergency brake cable. This cable will
not work with stock drum brakes, and will
only work with the TeraFlex Disc Brake
Kit, or factory Jeep disc brake kits after
2003. Sold individually, order two for a
full axle. Use the E-Brake Cable Chart to
select the e-brake cable for your specific
application.
Total Length 41.5
TJ 97-06 L&R
4304169
$49.99
RECOVERY STRAP
TJ REAR DISC BRAKE HOSE KIT
Finish the brake line system when
installing a disc brake conversion on any
vehicle. This kit contains the necessary
hardware to connect the disc brake kit to
the brake hard lines. This kit is included
in the Jeep disc brake kits (4354420 &
4354410), but is not included in the Ford
disc brake kit (4354400).
Note: New shorter hard brake lines
must be installed. Available from most
auto parts supply stores.
TJ Rear Disc Brake Hose Kit
4355400
$78.99
The tow strap is designed for those unlikely situations where you have to pull out
the strap - for your friend of course. The strap features a 20000 lb. rating with red
stress thread for a visible warning of potential strap failure. It measures 30 long x
2 wide, with reinforced stitched loop ends.
The tree strap was designed to use as a winch point from a tree without damaging
the tree. It has plenty of strength and flex to pull you out of those tough places
while leaving mother nature intact. 3 x 7
Recovery Tow Strap
Recovery Tree Strap
60
4800100
4800101
$58.99
$28.99
Tj components
TJ HAND THROTTLE KIT
TJ 5.7 HEMI TRANSMISSION MOUNT BRACKET KIT
This hand throttle is designed to provide constant idle or speed when off-roading.
It is especially useful when use of clutch, gas and brake are needed together. The
hand throttle is designed for off-road use only and is not intended to be used as a
cruise control device.
TJ Hand Throttle Kit - Skin Packed
TJ Hand Throttle Kit - Boxed
4870400
4870402
$37.99
$37.99
This transmission mount is designed to eliminate the custom fabrication necessary

to install a 5.7 HEMI engine conversion in TJ Wranglers. The simple bracket offers
a bolt-in solution to save time and effort. Works with the TeraFlex Hemi BellyUp
skidplate.
TJ HEMI Transmission Mount Bracket Kit
4947183
$60.99
TJ 5.7 HEMI GAS PEDAL BRACKET KIT
TJ GRAB HANDLE KIT
The 5.7 HEMI uses a drive-by-wire system that involves some pedal modification.
Our HEMI gas pedal bracket will make this modification as easy as possible, and
will save valuable time when performing the engine conversion. The bracket is
precision laser cut and formed. For use with a 2005 Grand Cherokee drive-by-wire
gas pedal (#52109683AB)
TJ 97-02 Front Grab Handle Kit - Pair
TJ 97-02 Rear Grab Handle Kit - Pair
4830300
4830301
4830301
4830302
$38.99
$39.99
$39.99
$43.99
TJ HEMI Gas Pedal Bracket Kit
4877480
$60.99
TJ 5.7 HEMI MOTOR MOUNT KIT
TRAIL RECOVERY KIT
TeraFlex Heavy Duty TJ HEMI Motor Mounts are laser cut from 1/4 steel and to
withstand the horsepower and torque delivered by the HEMI engine. The Clevite
rubber bushing provides superior vibration control and provide the best strength
and dependability to prevent shearing from the frame under high torque and high
horsepower loads.
TJ HEMI Motor Mount Kit
4960400
$360.99
The TeraFlex Recovery Gear Bag is designed as a premium recovery kit that
incorporates all of the basic recovery tools that you will realistically need when
performing various pulling tasks with your Jeep. The kit features our heavy duty
tool bag, 7 tree strap with 20000 lb. rating, 30 tow strap with 20000 lb. rating, two
d-ring shackles, and a key chain air deflator.
This kit is an incredible value - Just add up all the components separately and you
will see for yourself! Dont go out on any trail without this essential recovery kit in
the back of your Jeep!
Trail Recovery Kit
5028995
$120.99
TOOL & GEAR BAG

Tool & Gear Bag
5028900
TJ 5.7 HEMI PLUG-&-PLAY WIRING HARNESS
$28.99
The Plug & Play TJ 5.7 HEMI wiring harness is available directly from Hot Wire
Auto (www.hotwireauto.com). Contact them directly for pricing and availability
(479) 243-9115.
61
Tj skid plates
TJ HD TRANSMISSION SKID PLATE KIT
TJ HD GAS TANK SKID PLATE
The HD transmission skid plate will

fit all TJ Wrangler models from 19972006 including manual and automatic
transmissions. It is the perfect solution
to protecting the underside of your Jeep
and attaches easily to the BellyUp Skid
Plate. It is laser cut from 3/16 steel and
powder coated for durability.
Note: This skid plate must be used in
conjunction with the BellyUp skid plate,
and the TeraFlex HD oil pan skid plate.
Protect your TJ gas tank with this complete replacement skidplate, and increase
ground clearance by 1 (body lift required). With 3/16 CNC laser cut steel and
durable powder coat this skidplate will keep you protected. Features a recessed
groove for trackbar/differential clearance and drain holes to increase water
drainage. Includes all necessary hardware. Fits all TJs & Unlimiteds 1997-2006.
TJ HD Gas Tank Skid Plate
4940071
TJ Transmission Skid Plate Kit
4607100
$162.99
TJ HD OIL PAN SKID PLATE
$373.99

When mounting the gas tank skid plate without a 1 body lift use this hardware kit
to properly mount the skid plate.
TJ Gas Tank Skid Plate Lowering Kit
4970400
$29.99
The HD oil pan skid plate is another way
to protect the underside of your vehicle.
It fits all TJ Wranglers from 1997-2006
and is the perfect addition to your other
TeraFlex components. It is CNC laser cut
from 3/16 steel and powder coated for
durability and abrasion resistance. Fits
4.0L 6 cylinder engine only.
TJ BELLYUP SKID PLATE KIT
TJ Oil Pan Skid Plate Kit
4667100
$135.99
TJ STEERING BOX SKID PLATE KIT
The BellyUp increases your ground clearance by up to 2-3/8 by replacing the

factory skid plate with a lower-profile 1/4 plate steel heavy duty skid plate.
A 1 body lift is recommended with Rubicon applications for proper transfer case
clearance. Some exhaust adjustment may be necessary. Fits all TJ Wrangler
models including the Rubicon and Unlimited.
Note: This kit requires some fine tuning and adjustment to eliminate driveline
vibration.
Short shaft kit: This kit will require the use of a short shaft kit (Part # 4444400 or
# 4444401).
Lowering kit: Because the BellyUp can make driveline angles severe, a lowering
kit (Part # 1900100 for a 1 drop or Part #1900000 for 1/2 drop) will decrease the
severity of that angle. This issue is common when the BellyUp is combined with a
4 suspension system.
TJ BellyUp Skid Plate Kit
4648403
$487.99
4648457
$509.99
Protect one of the most vulnerable

components on your Wrangler. Each kit
comes with all the hardware necessary
for installation and can be used with
stock and most aftermarket bumpers.
TJ Steering Box Skid Plate Kit
4627400
$69.99
TJ RUBICON BELLYUP COMPRESSOR MOUNT BRACKET KIT

This bracket is designed to allow the
factory Rubicon air locker compressor to
mount to the TeraFlex BellyUp skid plate.
TJ 5.7 HEMI BELLYUP SKID PLATE KIT

TJ HEMI BellyUp Skid Plate Kit (w/ 545RFE trans.)
BellyUp Compressor Mounting Bracket Kit
4847400
$76.99
62
Tj exterior components
TJ SPARE TIRE EXTENSION KIT
TJ REMOVABLE MUD FLAP KIT
This simple kit allows you to carry a larger spare tire/aftermarket wheel by
extending the position of the spare tire mount away from the vehicle. This kit is
not recommended for tires larger than 33 inches. The improved design features
gussets for superior strength. Fits all TJ Wrangler models including the Rubicon
and Unlimited.
TJ Spare Tire Extension Kit - Skin Packed
TJ Spare Tire Extension Kit - Boxed
1907220
1907200
$38.99
$38.99
Typically mud flaps are a nuisance and cannot be easily removed for off-road use.
The TeraFlex heavy duty mud flap kit is easily installed, and when its time for offroad use they are easily removed by pulling a pin. They can be stored in the back
of the vehicle, and installed before returning to the highway.
The mud flaps will fit most vehicles. Some drilling is required.
TJ removable mud flap kit
4808401
$113.99
TJ BRAKE LIGHT EXTENSION KIT

TJ FOG LIGHT EXTENSION WIRE KIT
The brake light extension is designed to allow the use of a larger full size spare
tire, and retain the factory third brake light for safety. The extension is designed
as a complete bolt-on accessory with no drilling required. It will accommodate tires
up to 33.
TJ Brake Light Extension Kit - Skin Packed
TJ Brake Light Extension Kit - Boxed
1902020
1902000
$43.99
$43.99
This extension wire is the solution for those of you using the short style bumpers
and wishing to retain your factory fog lights.
The simple extension wire uses factory style connectors for clean and simple
extension. Sold in pairs.
TJ Fog Light Extension Wire Kit - Pair
5400100
$39.99
TJ CB ANTENNA MOUNT KIT
HD DIFFERENTIAL COVERS
ensure protection.
3990630
3990650
3990660
$93.99
$103.99
$135.99
The TJ CB antenna mount provides a simple way to mount a CB antenna to a

Jeep. The bracket installs between the brake light and the body. No drilling
required. Fits CJs, YJs, and TJs.
DRIVER
TJ CB Antenna Mount Kit - Driver - Skin Packed
TJ CB Antenna Mount Kit - Driver - Boxed
1912001
1912091
$26.99
$26.99
TJ CB Antenna Mount Kit - Passenger - Skin Packed 1912002

TJ CB Antenna Mount Kit - Passenger - Boxed
1912092
$26.99
$26.99
PASSENGER
63
Yj wrangler
1987 - 1995
Yj shackles
YJ REVOLVER Z-BOX KIT
YJ REVOLVER SHACKLE KIT
The TeraFlex Revolver Z-Box is the perfect companion component to the Revolver
shackles. They are hinged to allow the box to open up to offer additional articulation
and down travel to maximize traction and control. They also reduce spring stress
by working in combination with the Revolver Shackles. Their opposing construction
allows only one side to open at a time for added stability. The Z-Boxes help
maintain proper driveline angles when used with the shackles.
YJ Revolver Z-Box Kit - Pair (One Axle)
1035000
$117.99
YJ FRONT SHACKLE KIT

The HD front shackle is formed from
1/4 steel with an attractive zinc plating
to resist corrosion. It replaces the flimsy
stock shackle that can bend and be a
safety hazard. The bolted cross brace
increases rigidity and strength. Sold in
pairs.
YJ Front Shackle Kit - Pair
1933100
The TeraFlex Revolver Shackle utilizes a unique shackle design that hinges and
rotates to allow leaf springs to flex and compress without additional spring stress.
TeraFlex Revolver Shackles are self-supporting and fold against themselves on
level ground.
Because the shackles are a bolt-on kit, they can be installed easily with
aftermarket suspension systems to achieve an even greater level of performance.
When properly installed, the shackles will maximize articulation and wheel droop.
No other off-road product improves your vehicles trail performance with so little
investment as the TeraFlex Revolver Shackle. Application chart below. Sold in
pairs.
$87.99
YJ REAR KICKBACK SHACKLE KIT

The HD KickBack shackle design
increases rear spring travel, and is
formed from 1/4 steel with an attractive
zinc plating to resist corrosion. The
bolted cross brace increases rigidity and
strength. Sold in pairs.
YJ
YJ Front Revolver Shackle Kit (2.5 Spring)
YJ Rear Revolver Shackle Kit (2.5 Spring)
1033000
1034000
$254.99
$254.99
1023000
$254.99
CJ
CJ Front Revolver Shackle Kit (2 Spring)
Also fits Suzuki Samurai, International Scout 800 (Front & Rear), and Scout II Rear
YJ Rear KickBack Shackle Kit - Pair
1934100
$95.99
REVOLVER REPLACEMENT COMPONENTS
CJ Rear Revolver Shackle Kit (2.5 Spring)

Early CJ Revolver Shackle Kit (1.75 Spring)
CJ Spring Perch Kit (1.75 Spring) - Pair
1033000
1025000
1933000
$254.99
$254.99
$41.99
FJ40 & 45 Front & Rear Revolver Shackle Kit

1005040
Also fits Chevrolet S-10 Rear Revolver (2.5 Spring)
FJ60 70 & 80 Front & Rear Revolver Shackle Kit
1005041
Also fits 4Runner & Pickups
$254.99
TOYOTA
$254.99
HAND THROTTLE KIT

Replace your worn Revolver Shackle components, and restore complete
functionality. Common replacement items are bumpstop blocks, pivot bushings
and pivot bolts. The bumpstop blocks keep the Revolvers properly positioned
when folded in the resting position. The blocks are machined from Ultra High
Molecular Weight (UHMW) Nylon. Pivot bushings are a wear item, and over time
will need to be replaced to allow the shackle to properly extend and collapse as
designed. In addition, the pivot bolt may need to be replaced if necessary.
All components are sold individually.
White Bumpstop Cushion - Wide (2.5 spring) - Each
White Bumpstop Cushion - Narrow (2 spring) - Each
Revolver Cushion Bolt (1/4x20x1.5) - Each
Revolver Pivot Bushing - Each
Revolver Pivot Bolt (1/2x4) - Each
Revolver Pivot Nut (1/2 nylock) - Each
Revolver O-Ring Seal - Each
66
1000776
$8.99
1000775
$8.99
454
$1.99.01
8500845
$9.99
8500995
$1.99
8500996 $1.99.01
236
$1.99
This hand throttle is designed to provide

constant idle or speed when off-roading.
It is especially useful when use of clutch,
gas and brake are needed together. The
hand throttle is designed for off-road use
only and is not intended to be used as a
cruise control device.
Hand Throttle Kit - Skin Packed

Hand Throttle Kit - Boxed
4870400
4870402
$37.99
$37.99
Yj components
YJ FRONT SWAYBAR QUICK DISCONNECT KIT
YJ BELLYUP SKID PLATE KIT
TeraFlex quick disconnects are the leader in the industry. Spherical polyurethane
bushings eliminate noise and avoid metal-to-metal wear and tear. The design
combines silent function with ease of use. Fits all YJs.
YJ 0-2.5 Front Swaybar Quick Disconnect Kit
YJ 3-4 Front Swaybar Quick Disconnect Kit
1733200
1733400
$156.99
$156.99
YJ CB ANTENNA MOUNT KIT
Note: The YJ BellyUp kit is not inclusive in and of itself. Please refer to instructions
for further details. With standard low-pinion rear axle assemblies, some spacing of
the BellyUp will be required. When using a Belly-Up some additional modifications
may be necessary.
Short shaft kit: A short shaft kit will be necessary in order to use this kit.
Body lift: This kit will require a body lift of one to two inches depending on engine
and transmission type.
YJ BellyUp Skid Plate Kit
4648400
$471.99
This kit provides a simple way to mount

a CB antenna to a Jeep. The bracket
installs between the brake light and the
body. No drilling required. Fits CJs, YJs,
and TJs.
YJ CB Antenna Mount Kit - Driver - Skin Packed

YJ CB Antenna Mount Kit - Driver - Boxed
The BellyUp increases your ground clearance by up to two inches by replacing

the factory skid plate with a lower-profile support. The clearance gained with the
BellyUp is the equivalent of increasing tire diameter by four inches. The BellyUp is
manufactured with 3/16 steel to provide superior protection off-road.
YJ REMOVABLE MUD FLAP KIT
1912001
1912091
$31.99
$31.99
YJ CB Antenna Mount Kit - Passenger - Skin Packed 1912002

YJ CB Antenna Mount Kit - Passenger - Boxed
1912092
$31.99
$31.99
Typically mud flaps are a nuisance and cannot be easily removed for off-road use.
The TeraFlex heavy duty mud flap kit is easily installed, and when its time for offroad use they are easily removed by pulling a pin. They can be stored in the back
of the vehicle, and installed before returning to the highway. The mud flaps will fit
most vehicles. Some drilling is required.
YJ Removable Mud Flap Kit
4808401
$113.99
YJ LEAF SPRING PLATE KIT
These universal leaf spring mounting plates will allow you to attach leaf springs to
custom axles, or to rebuild your stock application. The plates will work with all rear
axles, including stock Jeep, Dana 44 & 60. Sold in pairs.
YJ Leaf Spring Plate Kit - Pair
4957300
$73.99
67
Unibody platform
Xj Cherokee 1984 - 2001
Zj grand Cherokee 1993 - 1998
Wj grand Cherokee 1999 - 2004
Wk grand Cherokee 2005 - 2010
Kj liberty 2002 - 2007
Kk liberty 2008 - 2012
Xk commander 2006 - 2010
Xj Cherokee
XJ 2 BUDGET BOOST LIFT KIT
The TeraFlex budget boost is a simple and economical way to increase vehicle
height by 1.5. The budget boost fits 30 tires. Fits all 1984-2001 XJ Cherokees.
XJ 2 Budget Boost Lift Kit
1371200
$152.99
XJ 1.5 REAR SHACKLE KIT

XJ FRONT SWAYBAR QUICK DISCONNECT KIT
The rear shackle kit for Cherokees will
provide 1-1/2 of lift. The heavy duty,
greaseable shackles are designed for
off-road use and will provide a smooth
quiet ride on the highway.
XJ 1.5 Rear Shackle Kit
TeraFlex quick disconnects are the

leader in the industry. Spherical
polyurethane bushings eliminate noise
and avoid metal-to-metal wear and tear.
The design combines silent function with
ease of use. Fits all XJs with 2-4 of lift.
1974100
$94.99
XJ REAR REVOLVER SHACKLE KIT

The popular Revolver shackle is also
available for the XJ Cherokee. The
Revolver shackle replaces the factory
shackle and provides no increased
height, but allows for additional down
travel.
XJ Rear Revolver Shackle Kit
1074000 $281.99
XJ 1/2 TRANSFER CASE LOWERING SPACER KIT

The transfer case lowering kit will help
eliminate and control driveline vibration
caused by increased suspension lift.
Includes all spacers and hardware
required.
XJ 1/2 Transfer Case Lowering Spacer Kit
1970104
$31.99
$156.99
$156.99
XJ FRONT LOWER FLEXARM KIT

Uses 9/16 [14mm] Bolt,
1 1/4-12 UNF Thread,
1 1/2 Wrench On Tube,
1 7/8 Wrench On Jam Nut.
XJ Front Lower Flexarm Kit
1615700 $351.99
Large Lower Flexarm Joint

4116260
1951000
$66.99
$27.99
XJ FRONT UPPER FLEXARM KIT
ZJs. This product will not work on stock vehicles, 3 of lift minimum is required.
1743022
4313320
$219.99
$17.99
70
1713000
1713090
Sold In Pairs
XJ FRONT ADJUSTABLE TRACKBAR KIT
XJ Front Adjustable Trackbar Kit

Replacement Front Trackbar Bushing
XJ 2-4 Front Quick Disconnect Kit - Skin Packed

XJ 2-4 Front Quick Disconnect Kit - Boxed

Max Length= 17-3/16
Uses 7/16 [12mm] Bolt ,
7/8-18 UNS Thread,
Sold In Pairs
XJ Front Upper Flexarm Kit
1613800 $347.99
Small Flexarm Joint

4116230
1951100
$60.99
$22.99
Zj grand Cherokee
ZJ GRAND CHEROKEE 2 BUDGET BOOST LIFT KIT
ZJ 2 Budget Boost Lift Kit - Skin Packed

ZJ 2 Budget Boost Lift Kit - Boxed
1381220
1381200
$152.99
$152.99
The budget boost is a simple and economical way to lift a Jeep. Its great if you
want to fit 30-inch tires. This kit will provide one and a half inches of lift. It is not
designed to be used in addition to an aftermarket suspension. Fits all 1993-1998
ZJ Grand Cherokees
ZJ LOWER FLEXARM KIT
ZJ FRONT ADJUSTABLE TRACKBAR KIT

Uses 9/16 [14mm] Bolt,
1 1/4-12 UNF Thread,
Sold In Pairs
ZJs. This product will not work on stock vehicles, a minimum of 3 lift is required.
ZJ Front Adjustable Trackbar Kit
Front Trackbar Bushing
1743022 $219.99
4313320
$17.99
ZJ FRONT SWAYBAR QUICK DISCONNECT KIT
ZJ Lower Flexarm Kit
1615700 $351.99
Large Lower Flexarm Joint

4116260
1951000
$66.99
$27.99
ZJ FRONT UPPER FLEXARM KIT

Max Length= 17-3/16
7/8-18 UNS Thread,
Sold In Pairs
ZJ Front Upper Flexarm Kit
1613800 $347.99
Small Flexarm Joint

4116230
1951100
$60.99
$22.99
ZJ REAR UPPER FLEXARM KIT
silent function with ease of use. The upper swaybar link end has a polyurethane
ball for long term durability and silent function. The lower swaybar link end has a
large polyurethane ball and pin for easy swaybar link removal. When connected for
street use the link provides immediate reaction during swaybar loading to eliminate
excess play. This results in improved lateral control and steering response
compared to the stock rubber swaybar link bushings.
for unrestricted axle articulation. Fits all ZJs with 2-4 of lift.
ZJ 2-4 Front Quick Disconnect Kit - Skin Packed
ZJ 2-4 Front Quick Disconnect Kit - Boxed
1713000
1713090
$156.99
$156.99

Min. length= 13
Max length= 14-3/8
7/8-18 UNS thread,
Sold In Pairs
ZJ Rear Upper Flexarm Kit
1614800 $373.99
Small Flexarm Joint

4116230
1951100
$60.99
$22.99
71
Wj & wk grand Cherokee

WJ GRAND CHEROKEE 2 BUDGET BOOST LIFT KIT
WJ 2 Budget Boost Lift Kit - Skin Packed

WJ 2 Budget Boost Lift Kit - Boxed
1391220
1391200
The 2 WJ budget boost is a simple and economical way to increase vehicle ride
height for larger tires and mild off-roading. Comes with spring spacers, bumpstops
and all necessary hardware. Fits all 1999-2004 WJ Grand Cherokees.
$241.99
$241.99
RECOVERY STRAP
WJ FRONT SWAYBAR QUICK DISCONNECT KIT
The recovery strap features a 20000 lb. rating, and measures 30 long x 2 wide,
with reinforced stitched loop ends. The tree strap can be used as a winch anchor,
and has the same 20000 lb. rating and measures 3 x 7
Recovery Tow Strap
Recovery Tree Strap
4800100
4800101
TeraFlex quick disconnects are the leader in the industry. Spherical polyurethane
bushings eliminate noise and avoid metal-to-metal wear and tear.
The design combines silent function with ease of use. Fits all WJs with 2-4 of lift.
WJ 2-4 Front Swaybar Quick Disconnect Kit
$58.99
$28.99
1493000
$156.99
WK GRAND CHEROKEE 2 BUDGET BOOST LIFT KIT
TeraFlex has designed a vehicle specific budget boost to give the Grand
Cherokee some added lift, and off-road ability. Because the Grand Cherokee has
independent front suspension (IFS), certain factors have to be addressed when
creating a suspension lift. Our budget boosts are designed to gain the maximum
lift without causing premature failure to the IFS axles and components. Fits all
2005-2010 WK Grand Cherokees.
72
Note: Shock changes are not required with swaybars connected.

WK 2 Budget Boost Lift Kit
1361200
$295.99
Liberty & commander

KJ LIBERTY 2 BUDGET BOOST LIFT KIT
The KJ Liberty 2 budget boost lift kit provides the perfect amount of lift to allow
backcountry exploration, while maintaining a controlled and balanced ride.
Fits all 2002-2007 KJ Liberty Jeeps.
KJ 2 Budget Boost Lift Kit
1301200
$332.99
KK LIBERTY 2 BUDGET BOOST LIFT KIT
KK 2 Budget Boost Lift Kit
1301208
$332.99
The TeraFlex 2 budget boost lift kit will allow second generation KK Liberty
owners to keep all of the factory handling and suspension control while providing
enough lift for larger tires perfect for the daily driver and weekend traveler. Fits all
2008-2012 KK Liberty Jeeps.
XK COMMANDER 2 BUDGET BOOST LIFT KIT
The XK Commander 2 budget boost lift kit is specifically designed to provide

superior highway handling and off-road performance, without causing premature
failure to the IFS axles and components. Perfect for your weekend adventure. Fits
all 2006-2010 XK Commander Jeeps.
XK 2 Budget Boost Lift Kit
1361200
$295.99
73
flexarms
flexarm joints
flexarm joint rebuild kits
Monster flexarms
y
t
u
s
D
m
y
r
a
v
x
a
e
e
l
Hnster f
Mo
We set the standard in Wrangler performance with our adjustable flexarm that
offered performance features never before seen. We have now delivered the next
generation of control arms and components with our Monster Series heavy duty
flexarm Joints. We designed a superior flexarm that addressed and solved some
of the limitations of our original flexarm. The new Monster flexarm offers superior
tubing strength and the largest interchangeable and rebuildable ends ever.
TeraFlex Monster flexarm Joints feature a shank that is 5 long for maximum
adjustability and strength (the industry standard 1-1/4 heim has only
1-1/2 of shank). The one-piece forged ends provide 2 of total
adjustment. This makes it possible to have up to four inches
of fine tuning per arm for adjustment to get your suspension
set up the way you need it. A greaseable Zerk keeps
the joints properly lubricated preventing seizing under
the most dirty and muddy situations. The arms are
constructed of 2 or 1-3/4 diameter .281-wall DOM
tubing. The Monster arm ends can be utilized as a
replacement or upgrade to many popular control arms
that utilize a 1-1/4, 12 threads-per-inch heim joint
end. Custom Builders Corner tubing is available in
lengths of four-inch increments.
.
3 oh.oDusing
d hank
e
g
r
o
f 5 s
!
e
z
i
S
l
a
u
t
c
A
TeraFlex Monster flexarm joint housings have five inches of total thread length. The
industry standard 1-1/4 rod end has only 1-1/2 of thread length. This additional
length allows for up to 4 inches of custom flexarm length adjustment.
TeraFlex Monster flexarms offer the ultimate in performance, durability and
strength. The urethane and steel flexarm joints provide a full 30 degrees of
misalignment for maximum range of motion as the suspension cycles.
CHROME PLATED BALL
The chrome plated ball provides

extreme corrosion resistance and
incorporates a smooth sliding surface
to reduce bushing friction and heat
buildup and extend maximum bushing
life. Increased shoulder width provides
secure mounting.
76
FORGED BUSHING WALL
VIBRATION DAMPING
The simplified forging increases

housing strength and eliminates excess
parts. The innovative housing design
utilizes a single snap ring to simplify the
entire assembly process.
Interlocking fingers provide a flowthrough grease channel for proper

lubrication to maximize bushing life.
Vibration
damping
polyurethane
material reduces road noise, eliminates
clunks, and keeps proper position for
maximum articulation during travel.
PREMIUM ZINC PLATING
The high strength forged housing is

CNC machined to exacting tolerances
for ultimate performance and durability.
Zinc plating will ensure that these
tolerances
are
maintained
and
preserved for the life of the rod end.
Standard 1-1/4 x 12tpi threads.
Monster flexarm joints

LARGE CLEVITE FLEXARM JOINT
LARGE FLEXARM JOINT
When a quiet street ride and

vibration free driving are required,
the Clevite bushing ends will
give you the feel you want. The
Clevite bushing will provide the
most noise and vibration damping
characteristics possible. This end
can also be used as a replacement
for any control arm utilizing a
1-1/4 x 12 tpi. Heim type rod end.
Uses a 9/16 bolt.
Our flexarm joints provide

excellent off-road capabilities
with articulation and durability.
They damp road noise and
vibration. This end can also be
used as a replacement for any
control arm utilizing a 1-1/4 x 12
tpi. Heim type rod end. Uses a
9/16 bolt.
2-5/8
Shoulder Width= 2-5/8

Bolt Dia.= 9/16 [14mm]
1-1/4x12 UNF Thread,
9/16
[14mm]
Large Flexarm Joint - Right Hand Thread

Large Flexarm Joint - Left Hand Thread
4116260
4116270
$66.99
$66.99
1951000
$27.99
LARGE OFFSET FLEXARM JOINT

The offset flexarm joint forging
is designed for applications
needing additional clearance
for tires, or other frame
configurations. The flexarm
joint provides excellent off-road
capabilities with articulation and
durability. They damp road noise
and vibration. The forging uses
standard 1-1/4 x 12 tpi. with a
9/16 bolt.
2-5/8

Bolt dia.= 9/16 [14mm]
2-5/8
9/16
[14mm]
Large Clevite Flexarm Joint - Right Hand Thread

Large Clevite Flexarm Joint - Left Hand Thread
4520012
4520011
$60.99
$60.99
4915161
$20.99
JK FRONT UPPER SMALL OFFSET LONG FLEXARM JOINT

The offset flexarm joint forging is
designed for applications needing
additional clearance for tires, or
other frame configurations. The
end utilizes a 7/8 x 18 tpi. shank
and accepts a 9/16 bolt.
Shoulder width= 2-5/8

Bolt dia.= 9/16 [14mm]
Shank angle = 10
Shoulder width= 2
7/8-18 UNS thread,
9 Angle
10 Angle
9/16
[14mm]
9/16
[14mm]
Large Offset Flexarm Joint - Right Hand Thread

4116250
1951000
$77.99
$27.99
Small Front Upper Offset Long Flexarm Joint
4117220
$66.99
Small Upper Long Flexarm Joint Rebuild Kit
1951500
$22.99
JK REAR UPPER SMALL OFFSET FLEXARM JOINT
SMALL FLEXARM JOINT

The small spherical urethane
Monster end uses the same
internals as its larger brother, in
a scaled down version. The end
utilizes a 7/8 x 18 tpi. shank
and accepts a 7/16 bolt.
The offset flexarm joint forging

is designed for applications
needing additional clearance
for tires, or other frame
configurations. The end utilizes
a 7/8 x 18 tpi. shank and
accepts a 9/16 bolt.
Shoulder Width= 2
Bolt Dia.= 12mm
7/8-18 UNS Thread,
2-5/16

Shank Angle = 9
7/8-18 UNS Thread,
9 Angle
7/16
[12mm]
Small Flexarm Joint - Right Hand Thread

Small Flexarm Joint - Left Hand Thread
9/16 [14mm]
4116230
4116231
1951100
$60.99
$60.99
4116220
$66.99
$22.99
Small Rear Upper Offset Flexarm Joint Rebuild Kit
1951400
$22.99
77
Monster flexarm joints

TJ PRO TRACKBAR CLEVITE JOINT
LARGE WELD-ON FLEXARM JOINT

Our flexarm joints provide excellent offroad capabilities with articulation and
durability. They damp road noise and
vibration. This end is designed to be
used in custom control arm applications,
and will require welding. Fits 1.5 ID tube.
Uses a 9/16 bolt.
This small Clevite Monster end is

designed as a trackbar end, and
will provide maximum road damping
characteristics for highway handling.
The incorporated rate plate provides
superior stiffness for responsiveness
and handling control. The end utilizes
a 7/8 x 18 tpi. shank and uses a 10mm
bolt.
Shoulder Width= 1.6
Bolt Dia.= 10mm TJ
7/8x18 UNF Thread,
1.6
shoulder width= 2-5/8

bolt dia.= 9/16 [14mm]
insert to= 1.5 ID tubing
Large Weld-On Flexarm Joint
4112180
$52.99
1951000
$27.99
Large Weld-On Flexarm Eyelet Joint
4111180
$38.99
1951000
$27.99
LARGE WELD-ON FLEXARM EYELET JOINT
10mm - TJ
TJ Pro Trackbar Clevite Joint - Right Hand

TJ High Steer Trackbar Clevite Joint - Left Hand
4112222
4112221
$52.99
$52.99
TJ REAR TRACKBAR JOINT

The trackbar urethane flex end will allow
some misalignment when articulating,
and has a specially designed urethane
bushing to restrict excess movement
and allow control and handling at
highway speeds. The end utilizes a 7/8
x 18 tpi. shank and accepts a 10mm
bolt.
1.6
Shoulder Width= 1.6

Bolt dia.= 10mmTJ
7/8x18 UNF Thread,
Our flexarm eyelet joint provides

excellent off-road capabilities with
articulation and durability. It damps a fair
amount of road noise and vibration. This
end is designed to be used in custom
control arm applications, and will require
welding. Uses a 9/16 bolt.
shoulder width= 2-5/8
bolt dia.= 9/16 [14mm]
eyelet OD= 2.5
FLEXARM JOINT WELD-ON INSERT

These weldable threaded inserts make
custom link building simple and easy.
Weld the insert to control arm length
tubing. Weldable inserts are available
to fit our large (1-1/4 12 tpi.), medium &
small (7/8 18 tpi.) Monster ends.
The large inserts require a minimum of
1.5 ID tubing and the medium/small
inserts require a minimum of 1-1/8 ID
tubing.
10mm - TJ
TJ Rear Trackbar Joint - Right Hand Thread

TJ Rear Trackbar Joint Rebuild Kit
4115102
1951600
$52.99
$18.99
1-1/4 Weld-On Insert - Right Hand Thread

1-1/4 Weld-On Insert - Left Hand Thread
7/8 Weld-On Insert - Right Hand Thread
7/8 Weld-On Insert - Left Hand Thread

sockets.
4107102
4107101
4107122
4107121
$16.99
$16.99
$14.99
$14.99
FLEXARM TUBE
1951300
1951350
$28.99
$27.99
FLEXARM COMPLETE JOINT REBUILD KIT

This complete rebuild kit includes all
flexarm joint rebuild components and
Clevite bushings required to completely
rebuild your TeraFlex flexarms. Part
#1952300 rebuilds 4 arms - front lower
and rear upper flexarms.
JK Long Flexarm Complete Joint Rebuild Kit - 8 Arms 1952100
TJ Short Flexarm Complete Joint Rebuild Kit - 8 Arms 1952500
TJ Lower Flexarm Complete Joint Rebuild Kit - 4 Arms 1952600
78
$348.99
$192.99
$338.99
$308.99
$183.99
TeraFlex offers standard lengths of flexarm tubing pre-tapped for our large Monster
ends (1-1/4x12tpi threads). These can be used for custom suspension links or
torque arms.
The DOM tubing is 1-3/4 OD and .281 wall for superior strength to meet the
needs of high power and torque applications. Tube length is measured as the
actual length of tube.
26 Flexarm Tube
35 Flexarm Tube
1645726
1111135
$119.99
$147.99
JK
LJ
TJ
1653800
1654800
1653700
1654700
Front Upper
Rear Upper
Front Lower
Rear Lower
NA
1951450
1951000
1951000
NA
1951000
1951000
1951000
1951000
NA
1951100
1951000
Rebuild
Kit
NA
1657830
NA
1657840 4116220* 1951400
1657730 4116250* 1951000
1657740 4116260 1951000
* Forging has an angled shank
Long Front Upper

Long Rear Upper
Long Front Lower
Long Rear Lower
NA
4116260
4116260
4116260
4116260
1613801
1447712
1447702
1447707
1447704
Long Front Upper

Long Rear Upper
Long Lower Arms
Long Rear Upper
Long Rear Lower
NA
NA
4116250*
4116260
NA
4116230
4116260
Joint
1613800
Front Upper
1614800
Rear Upper
Lower Flex Arms 1615700
Control
Arm
NA
2-5/16"
2-5/8"
2-5/8"
NA
2-5/8"
2-5/8"
2-5/8"
NA
2-5/8"
2-5/8"
2-5/8"
2-5/8"
NA
2"
2-5/8"
4117220*
NA
NA
NA
4116230
4116220*
NA
NA
4116230
4116270
4520011
4116270
NA
4116230
NA
NA
Joint
Ball is eliptical for self center
14mm
14mm
14mm
14mm
12mm
14mm
14mm
14mm
7/16"
9/16"
9/16"
9/16"
9/16"
7/16"
7/16"
9/16"
Bolt
Joint
Diameter Width
Axle Side
1951500
1951500
4915161
4915161
1951100
1951400
4915161
4915161
1951100
1951000
4915161
1951000
4915161
14mm
14mm
14mm
14mm
12mm
14mm
14mm
14mm
7/16"
9/16"
9/16"
9/16"
9/16"
Frame Side
Rebuild
Bolt
Kit or
Diameter
Bushing
1951100
7/16"
600453
7/16"
4915161
9/16"
2"
2"
NA
NA
2"
2-5/16"
2-5/8"
2-5/8"
2"
2-5/8"
NA
2-5/8"
2-5/8"
Joint
Width/
Bushing
2"
2"
2-5/8"
MONSTER FLEXARM JOINT REFERENCE & REBUILD GUIDE
flexarm reference chart
79
Low range gearing

Dana 300
Dana 18 & 20
Np 231
Dana 300 20 & 18

LOW300 LOW RANGE GEAR KIT
LOW20 MANUAL LOW RANGE GEAR KIT
Change a CJ or Scouts 2.6:1 stock ratio to a true 4.0:1 low-range ratio. This lowrange gear replacement kit benefits from the Dana 300s strength and durability.
It allows the Jeep owner to enhance trail performance by maximizing the crawl
ratio. Installation of this kit into your transfer case will increase your crawl ratio by
50 percent.
This kit is easy to install. There are no driveline changes, or special shift linkages
required. It comes complete with all necessary gaskets and seals, and a new shift
rail with increased detent pockets (to help twin stick applications shift smoother,
and with more accuracy).
This kit uses a six-spline input gear for Dana 20s with manual transmissions. The
kit converts the stock 2.03:1 to 3.15:1 for improved rock crawling performance.
This five-gear kit fits 63-79 CJs, Jeepsters, Jeep trucks, Wagoneers, and 72-79
Scouts.
Low20 Manual Low Range Gear Kit
2112020 $1069.99
LOW20 AUTOMATIC LOW RANGE GEAR KIT
Note: Scout owners: Scout owners can purchase the #2103000 for 1980 Scouts (manual
transmissions). The #2103800 is designed for automatic transmissions. The Scout kit requires
some internal case grinding.
Low300 Low Range Gear Kit - Jeep

Low300 Low Range Gear Kit - Scout
Low300 Low Range Gear Kit - Scout Automatic
2123000 $802.99
2103000 $1069.99
2103800 $1069.99
LOW300 HEAVY DUTY OUTPUT SHAFT KIT
This low range gear kit is designed to work with the factory turbo 400 automatic
transmission. It uses a 15 spline input gear, common in vehicles from 1966-1973.
This kit will NOT fit the QuadraTrac transfer case.
Reduce your overall gear reduction almost in half- from 2.03:1 to 3.15:1.
Low20 Automatic Low Range Gear Kit
2112800 $1069.99
LOW20 BRONCO LOW RANGE GEAR KIT

Low-range gear kit for Bronco Dana 20
converts the stock 2.46:1 to 3.15:1. The
Low20 for Broncos requires a six-spline
input shaft to work.
This kit replaces the stock output shaft of the Dana 300 transfer case (1981-86)
with a heavy-duty output shaft. The new shaft is better suited for high-torque and
high-stress situations because it is thicker and stronger. It is great when combined
with the Low300 gear set because of its additional strength.
Note: This kit is designed to be used on the Dana 300 transfer cases that originally had the
longer tail housing. Bolt pattern differences prevent this kit from working with the shorter tail
housing design. This kit does NOT fit 1980 models.
Low300 Heavy Duty Output Shaft Kit
2223000
Low20 Bronco Low Range Gear Kit
2102000 $1069.99
LOW18 LOW RANGE GEAR KIT
$518.99

This kit reduces the 2.43:1 stock lowrange ratio to 3.15:1. This kit works on
66-71 CJs, utility wagons and pickups.
CJs older than 1966 require a large Dana
18 or 20 transfer case housing from a
66-79 Jeep.
DANA 300 REBUILD KIT
Low18 Low Range Gear Kit
2111018 $935.99
LOW18 OVERDRIVE LOW RANGE GEAR KIT

This version of the Low18 gear set is
designed to be used with Saturn and
Warn overdrives, and reduces the
2.43:1 stock low-range ratio to 3.15:1.
This kit ships with only three gears.
The additional gear, part 911098 can
be purchased directly from Advance
Adapters to complete the set.
This kit contains all the bearings and seals to completely overhaul the Dana 300
transfer case. Kit includes intermediate shaft, shim set for bearing adjustment and
shift fork friction pad set.
Low18 Overdrive Low Range Gear Kit
Dana 300 Rebuild Kit
82
2503000
2111000
$298.99
$788.99
Np231 low231
LOW231 4:1 HEAVY DUTY TRANSFER CASE KIT
The Tera Low231 4:1 heavy duty transfer case kit
provides rock-crawling performance without affecting
high range gears for daily drivers, or the trip to and
from the back country.
It provides a true 4.0:1 reduction through a heavy
duty 5 gear planetary system. The Tera Low231s
high input torque rating will handle extreme torque
applications. Each Low231 is covered with our
exclusive two-year warranty.
Note: Because these low-range
gear sets increase torque by up
to 50 percent, some large or
high-performance engines
may
contribute
to
premature drive train
failure.
1984-86 XJs and 1987
YJs use an NP207
transfer case and are not
compatible with the Tera
Low231 conversion
The 4.0:1 gear reduction planetary is

the heart of the HD 231 transfer case.
Our planetary features a hardened
steel housing and gears. Because of
the additional gear reduction when in
low range, engine RPMs should be kept
under 2500 (remember the planetary is
turning at 4 times that rate 2500 x 4.0
= 10000 RPM). Severe transfer case
damage can occur if this RPM warning
is not observed.
21 SPLINE INPUT 2104100 $1336.99
Wrangler 1988-2002 4 Cylinder Manual (AX-5)

Cherokee 1987-1990 6 Cylinder Automatic (AW4)
Cherokee 1987-1990 6 Cylinder Manual (BA-10)
23 SPLINE LONG INPUT
2104200 $1336.99
Wrangler 2003-2004 4 Cylinder Manual (NV-1500)
Wrangler 2005-2006 4 Cylinder Manual (NSG370)
Wrangler 1988-2006 6 Cylinder Manual (BA-10 AX-15 NV-3550 & NSG370)
23 SPLINE SHORT INPUT
2104303 $1336.99
Cherokee 1991-2001 6 Cylinder Automatic (AW4)
Cherokee 1987-1990 6 Cylinder Manual (AX-15)
Wrangler 2003-2006 6 Cylinder Automatic (42RLE)
LOW231 AUTOMATIC SEAL EXTENSION

A simple extension is used to position the seal
of the automatic transmission properly against
the transfer case. This kit may be ordered
separately as needed. For YJ and TJ 3-speed
automatics, 1988-2002.
Note: Check application before installing
23 SPLINE LONG INPUT W/ AUTOMATIC SEAL EXTENSION

2104400 $1364.99
Wrangler 1988-2002 4 Cylinder Automatic (TF-999 30RH)
Wrangler 1988-2002 6 Cylinder Automatic (32RH)
JK 241OR 2LOW SHIFT SECTOR KIT
Low231 Automatic Seal Extension w/Seal

Low231 Automatic Replacement Seal
2904400
600447
$33.99
$12.99
TJ 241OR 2LOW SHIFT SECTOR KIT

The TeraFlex 241OR 2Low for TJ Wrangler Rubicon models
will increase your standard low range shift pattern to include
a rear 2WD low range option. The 2Low kit is a completely
internal modification and does not require any other
modifications to the transfer case housing or components.
Installation can be done with the front-half of the transfer
case remaining in the vehicle.
The TeraFlex 241OR 2Low for JK Wrangler Rubicon

models will increase your standard low range shift
pattern to include a rear 2WD low range option. This
increases trail turning ability by allowing tighter turns
on narrow switchbacks, and eliminates most front
end steering bind associated with 4WD.
The 2Low retains the use of all factory low-range
options such as: ESP disabling, electronic swaybar
disconnect, and locker engage & disengagement. In
the 2Low position the 4WD dash light will illuminate
indicating you are in a low range gear.
TJ 241OR 2Low Shift Sector Kit
$282.99
TJ 231 2LOW SHIFT SECTOR KIT

The 2Low kit provides the benefit of true low range gearing,
while allowing the front to freely turn. It lets you choose
2Low in addition to the other standard options. The 2Low
kit will eliminate drive train bind and most of your tight trail
three-point turns. This kit is completely internal and does not
require any external modifications. Note: Fits 231-J transfer
cases only

JK 241OR 2Low Shift Sector Kit

2266900
2246900

$271.99
TJ 231 2Low Shift Sector Kit
2204000
$271.99
83
Np231 components
231 EXTREME SHORT SHAFT KIT
The extreme short shaft kit is what short wheelbase Wrangler owners have been
dreaming of for decades. The Extreme kit not only improves on strength, but also
increases driveline lengths by up to 7 over a stock application. It is over 3 shorter
than a standard SYE kit, and 1-1/2 shorter than an ATLAS II.
The Extreme SS kit comes with all necessary components to modify the stock
231 case. Speedometer readings are transferred through a tone ring and electronic
sensor. A converter box is necessary to make any speedometer calibration
adjustments.
This kit must be used with a CV style (double cardan) driveline.
Note: Fits 231-J transfer cases only. Earlier 231 applications with a mechanical speedometer
cable will require updating to an electronic speedometer.
231 Extreme Short Shaft Kit
4444400
$265.99

231 Extreme Short Shaft Kit Output Seal
231 Extreme Short Shaft Kit Output Yoke
231 Extreme Short Shaft Kit Output Yoke Nut
2199920
600071
231112
$10.99
$62.99
$10.99
Speedometer Calibration Chart

The Extreme Short Shaft kit does not use a cable-driven speedometer gear to calibrate the speed
of the vehicle. It uses a digital signal reading (similar to 03+ Rubicon). This allows a more accurate
speedometer reading. Use the calibration chart to configure your tire size & gear ratio. If your tire
size & gear ratio does not fall inside the green area, a converter box will be necessary to make any
calibration adjustments.
Factory speedometer variances are 3%. The green highlighted area indicates the acceptable range within factory
specs. Anything outside of this range may require some additional calibration using a converter box.
231 SHORT SHAFT KIT

This Short Shaft kit is engineered to withstand the increased torque (50%
increase) generated by the extreme reduction of the TeraFlex Low231 4:1 Heavy
Duty Transfer Case kit.
This kit also eliminates the need to lower the transfer case in most cases by
increasing the rear driveline length by four inches. It includes a larger output
bearing and rear housing.
This kit must be used with a CV style (double cardan) driveline.
Note: Fits 231-J transfer cases only
231 Short Shaft Kit - TJ/YJ, XJ Cherokees

231 Short Shaft Kit - XJ w/ Vacuum Disconnect
4444401
4444402
$251.99
$313.99

231 Short Shaft Kit Replacement Output Seal
231 Short Shaft Kit Replacement Output Yoke
231 Short Shaft Kit Replacement Output Yoke Nut
231104
3244404
231112
Speedometer Calibration Chart

Changing your ring and pinion ratio and/or tire size will cause an inaccurate reading of your
speedometer. Replacement of the speedometer gear is a simple procedure that takes minutes
to complete. The chart below lists ring and pinion ratios and tire size. Simply select the proper
configuration of your vehicle from the chart.
An accurate speedometer reading is important both on and off-road when detailing travel routes
and for on highway safety.
Factory speedometer variances are 3% from actual speed. Recommended speedometer driven gears are based on
a manufacturers published tire specs for revolutions per mile. This may differ from manufacturer to manufacturer.
84
$11.99
$61.99
$10.99
Drivelines & Components

TJ WRANGLER SLIP YOKE ELIMINATOR COMPARISON
Most 231 transfer cases came from the factory with a slip-yoke rear
output (see the bottom photo). This slip yoke will slip in and out of the
rear of the transfer case as the suspension cycles up & down. When
driveline angles are changed due to suspension height or suspension
travel the slip yoke is forced to operate at an angle and can cause
binding, and in some situations will crack the transfer case.
Extreme Short Shaft SYE
Driveline angle is very critical and must be addressed when making

any suspension modifications. An extreme driveline angle will cause
vibration and premature u-joint failure if not upgraded. A Short Shaft
kit, or Slip Yoke Eliminator solves the short driveline length, allows
driveline removal in the event of a u-joint failure without loss of
fluid, and increases the output shaft strength dramatically allowing
for increased power and torque to be transferred to the wheels for
traction.
Standard Short Shaft SYE
Stock Slip-Yoke
TeraFlex has perfected low range gearing and continues to lead the
industry in quality performance transfer case products.
HOW-TO TIP: DRIVELINE
CORRECTLY MEASURE FOR driveline length

JK WRANGLER
TJ WRANGLER
JK driveline length can be measured from flange edge to flange edge. This will give
you the running length measurement to pass along to your driveline manufacturer.
TJ driveline length can be measured from center of u-joint to center of u-joint

mounting surfaces. This will give you the running length measurement to pass
along to your driveline manufacturer.
85
Hd axles & components

Jk tera44 assemblies
TJ & JK Tera 60 Assemblies
Jk CRD60 assemblies
Tj CRD60 assemblies
Disc brake kits
Axle components
Jk tera30 hd axles
TERA30 & TERA44 HOUSING ASSEMBLY FEATURES & BENEFITS

Forged heavy duty inner knuckles with greater upper and lower section strength
1/4 Thick CNC laser cut axle brackets for extreme strength
Reinforced front trackbar mount (ties into spring pad) for greater strength
Integrated lower flexarm skid plates
Pre-tapped hole on spring perch for bump stop extensions
Pre-drilled holes for limit straps and lower spring retainers
Heavy duty ductile iron differential cover
Axles seals pre-installed
Pre-installed upper control arm bushings
Retains all JK ESP, ABS & speedometer sensor capability
Proper pinion angle for lifted JK applications
Premium UV protected triple-stage powder coat process for superior corrosion
resistance
Ductile cast iron housing with increased rib gussets
Smooth radius bottom design to glide over rocks & obstacles
Asymmetric housing design, for extra long tube side strength
Bottom oil drain hole for simple fluid changes
Integrated factory location upper control arm mount
3.25 x 0.25 axle tube increases strength to resist bending and torsion with
minimal weight increase
3.25 x 0.5 extreme duty axle tube is available on select Tera44 models
Compatible with factory JK Rubicon locker (R44 model only)
Includes adapter fitting for ARB and Detroit lockers (TF44 model only)
100% engineered, designed, and built in the USA
100% new components
No Excuses warranty - 1 year, unlimited mileage
3.25 O.D. X 1/4 WALL AXLE TUBE
4354025

4354025 $169.99
4354050 $169.99
JK HD REPLACEMENT BALL JOINT
3442002

JK 0-3
JK 4+ w/ raised pinion angle and trackbar bracket
HIGH PERFORMANCE TERA30/44 FRONT AXLE TUBE SEAL
3503000 $2130.99
3503004 $2130.99
Install Time: 8 hours (includes gear setup)
JK HD Ball Joint Upper & Lower Kit - w/out knurl

3440000
JK HD Ball Joint Upper & Lower Kit - w/ knurl
3440020
JK HD Ball Joint Upper & Lower Set of 4 - w/out knurl 3442002
JK HD Ball Joint Upper & Lower Set of 4 - w/ knurl
3442022
$125.99
$125.99
$249.99
$249.99
STANDARD INNER SEAL
The Tera44 uses the factory

inner axle seal to make seal
replacement
jobs
simple
and easy. By eliminating any
proprietary parts, maintenance
and repairs can be done with
readily available off-the-shelf
parts.
88
INTEGRATED MOUNT
The integrated cast upper

control arm mount provides
a precise OEM mounting
location. The integrated upper
control arm mount accepts
standard JK vulcanized rubber
bushings, and
comes preinstalled.
1/4 AXLE BRACKETRY
1/4 thick CNC laser cut axle

bracketry provides a secure
and dependable mounting
location for short and long arm
suspensions. Precision jigs
align the brackets correctly
to factory specs for premium
drivability.
HD BEARING CAPS
Heavy duty side bearing caps

help to reduce carrier distortion
and flex. This increases
bearing life and reduces failure
throughout the differential
assembly. The thicker bearing
caps additionally aid in
increasing the core differential
strength.
HD DIFF COVER
Heavy duty differential covers

are included with each axle
to maximize overall axle
housing strength and to
provide protection for internal
components from damage.
The covers are cast from
ductile iron and are over 3/8
thick.
Jk tera44 hd axles
TeraFlex JK heavy duty replacement axles are the perfect solution for bent, broken or damaged front axles in JK Wrangler and Rubicon vehicles. The Tera30 and Tera44
offer a direct bolt-in upgrade for Jeep JK owners looking to beef up the weak areas of their front axle. These axles have been engineered for extreme use and feature 3.25
OD x .25 wall DOM tubing for superior strength. Forged inner knuckles increase section strength to eliminate ball joint separation.
The replacement housing includes a heavy duty housing, tubes, axle bracketry, and forged inner knuckles. Pre-installed inner seals and upper control arm bushings make
the upgrade seamless. Simply transfer your existing internal components, outer knuckle assembly, and brakes to the new housing!
Right Hand Drive
APPLICATIONS AVAILABLE
JK FRONT TERA44 RUBICON REPLACEMENT HOUSING

R44 - FOR OEM RUBICON OR COMPATIBLE LOCKERS*
JK 0-3
3544000 $2233.99
3544004 $2233.99

R44 - FOR OEM RUBICON OR COMPATIBLE LOCKERS*
JK 0-3
3544052 $2417.99
3544053 $2417.99
TF44 - FOR DANA 44 LOCKERS (NON RUBICON)**
JK 0-3
TF44 - FOR DANA 44 LOCKERS (NON RUBICON)**
JK 0-3
3544252 $2448.99
3544253 $2448.99
3544200 $2315.99
3544204 $2315.99
Install Time: 8 hours (includes gear setup)
*Note: The R44 axle is designed to work with factory axle shafts and Rubicon locker
68017176AA or the OX D44-JKR-30. The ARB RD157 or the OX D44-JKR-35 lockers can be
used with new 35 spline axle shafts.
**The T44 axle is designed to work with non Rubicon Dana 44 lockers. Please consult the
Tera44 axle flow chart prior to placing your order.
TERA44 LOCKER SENSOR PLUG & AIR LINE PLUG KIT

TERA44 TF44 MASTER BEARING INSTALL KIT**
JK Master Bearing Install Kit for TF44 Axle Housing
CAST AXLE HOUSING
Tera30 & Tera44 axles are

cast from ductile iron with
an asymmetrical design that
provides additional strength to
the long tube side of the axle.
Increased
side
gussets
maintain housing strength and
reduce case deformation and
deflection under torque.
359745
LOW PROFILE DESIGN
Axle ground clearance is a

concern no matter what lift
or tire size you have. The low
profile design of the Tera30
& Tera44 maximize available
clearance without sacrificing
function or strength.
$234.99
JK Tera44 Locker Sensor Plug & Air Line Plug Kit

JK Tera44 Locker Sensor Plug
JK Tera44 Air Line Plug Kit
HD INNER KNUCKLES
Heavy duty forged inner

knuckles have a greater upper
and lower section strength to
prevent deflection and ball
joint spread.
The
forged
knuckle maintains JK ball joint
steering axis inclination for
superior highway handling and
improved scrub radius.
3.25 X 1/4 WALL TUBE
Tera30 & Tera44 axles feature

3.25 OD x 1/4 wall DOM
tubing to increase strength
without adding unnecessary
weight. Larger diameter tube
exponentially resists bending,
especially on the long tube
side.
4350550
4350448
4350449
$29.99
$4.99
$25.99
TRIPLE-STAGE FINISH
Premium UV protected triple

stage powder coat finish
protects all TeraFlex axles.
The axles are media blasted,
chemically
etched,
and
primered before receiving the
final polished UV finish.
89
TJ Tera60 hd axles
The TeraFlex Tera60 has been developed specifically for Jeep Wrangler front
applications requiring maximum uptravel and suspension compression. By
integrating the driver upper control arm mount into the housing assembly an
additional 2 of uptravel is achieved over other aftermarket 60 series axles.
The Tera60 maintains features that are common in all TeraFlex axles including
heavy duty bearing caps, high-flow oil passages, smooth profile surfaces and
increased cover mounting area. The Tera60 also retains all factory JK ESP, ABS &
Speedometer sensor capability.
Turning and steering dynamics are greatly improved. Forged alloy steel inner
knuckles provides maximum strength and resist ball joint spread. The inner
knuckle positions the ball joints further apart to decrease stress, unnecessary wear
and increase ball joint life. The knuckles maintain JK specific ball joint inclination
for improved scrub radius and better turning dynamics. Cast outer knuckles
incorporate tie rod steering mounts for superior strength. Integrated brake caliper
mounts are designed to be used with the TeraFlex big brake kit, or big rotor kit
utilizing the massive 13.3 diameter rotor.
TJ FRONT TERA60 FULL FLOAT AXLE ASSEMBLIES

TJ Front Tera60 - No R&P or Carrier
3870000 $5999.99
4.30 SUPER 60
TJ Front Tera60 4.30 Super 60 ARB w/ Hubs
3806430 $8099.99
4.56
TJ Front Tera60 4.56 ARB w/ Hubs
3807456 $8099.99
4.88 SUPER 60
3806488 $8099.99
5.13
TJ Front Tera60 5.13 ARB w/ Hubs
3807513 $8099.99
5.38 SUPER 60
3806538 $8099.99
Axle tube construction takes advantage of 3.25 O.D. 3/8 wall DOM axle tubing
to provide extreme strength resistant to bending, while minimizing unnecessary
weight.
The Tera60 is available in standard 5x5unit bearing assembly or an 8x6.5 full
float configuration for more extreme applications. All Tera60 axles come standard
with the TeraFlex big brake kit.
The Tera60 is compatible with all Super 60 gear ratios for extreme duty applications
requiring additional ring and pinon strength.
SMOOTH HD HOUSING
The streamlined heavy duty

housing is one of the strongest
on the market, while shaving
over 36 lbs. from previous Tera
axles. Increased side gussets
maintain housing strength
and reduce case deformation
and deflection under extreme
torque and loading.
90
INTEGRATED MOUNT
The integrated cast low profile

upper control arm mount
allows up to 2 of additional
suspension up travel over
traditional aftermarket Dana
60
axle
housings.
The
integrated upper control arm
mount accepts standard JK
vulcanized rubber bushings.

TJ Front Tera60 Full Float Axle Specs:
63.5 WMS - WMS
5x5.5 wheel bolt pattern
LOW PROFILE DESIGN
3.25 X 3/8 WALL TUBE
The streamlined low profile

surface of the Tera60 provides
a smooth surface to glide over
rocks and other obstacles
on the trail. The low profile
housing surface provides
maximum ground clearance
without sacrificing strength or
function.
The oversized 3.25 O.D. x 3/8

wall DOM tubing increases
strength
without
adding
unnecessary weight. Larger
diameter tube exponentially
resists bending, especially on
the long tube side.
HD AXLE BRACKETS
All control arm and axle

mounting points are CAD
designed, laser cut, and
jig-welded for precise and
accurate fitment. 1/4 thick
steel CNC bent brackets
easily withstand the abuse of
constant trail rock contact.
Jk Tera60 hd axles
JK FRONT TERA60 FULL FLOAT AXLE ASSEMBLIES

JK Front Tera60 - No R&P, Carrier or Bearings
3670000 $6990.99
4.30 SUPER 60
JK Front Tera60 4.30 Super 60 ARB
Tera60 axles are available in several configurations to fit your application needs
including dual pattern 5x5 & 5x5.5 unit bearing or 8x6.5 full float locking hub. Full
float axles can be ordered with the larger Dana Super 60 ring and pinion gear sets
(limited ratios available) for extreme duty applications. All Tera60 complete axle
assemblies come ready-to-run and include a big brake kit.
3606430 $8899.99
JK FRONT TERA60 UNIT BEARING AXLE ASSEMBLIES
4.56
JK Front Tera60 4.56 ARB
3607456 $8899.99
JK Front Tera60 - No R&P, Carrier or Bearings
3606488 $8899.99
4.88 SUPER 60
3690000 $5899.99
4.30 SUPER 60
3626430 $7643.99
4.56
5.13
3607513 $8899.99
3627456 $7643.99
4.88 SUPER 60
5.38 SUPER 60
3606538 $8899.99
3626488 $7643.99
5.13
3627513 $7643.99
5.38 SUPER 60
JK Front Tera60 Full Float Axle Specs:
67 WMS - WMS
8 x 6.5 wheel bolt pattern
Right Hand Drive
FORGED INNER KNUCKLE
The forged inner knuckle

provides maximum strength
and resists ball joint spread
under extreme load. The
forged
knuckle
maintains
JK ball joint steering axis
inclination for superior highway
handling and improved scrub
radius.
HD OUTER KNUCKLE
The HD cast one-piece outer

knuckle
features reinforced
ball joint areas to eliminate
ball joint spread. Integrated
tie rod and steering arms
increase ground clearance.
The cast brake caliper mount
for 13.3 big brake or big rotor
kit eliminates adapter brackets.
3626538 $7643.99
JK Front Tera60 Unit Bearing Axle Specs:

67 WMS - WMS
5x5 standard wheel bolt pattern (with optional 5x5.5 bolt pattern)
HD STEERING SYSTEM
FULL FLOAT ASSEMBLY
The
Tera60
incorporates
the use of the TeraFlex HD
JK steering system that
can withstand the extreme
demands of dedicated trail
use. The forged tie rod is over
200% stronger than factory.
HD tie rod ends increase
responsive steering input.
Full float hub assemblies

increase axle durability and
reduce bearing load and axle
shaft stress. Forged chromoly
spindles increase strength in
key areas prone to additional
stress. Can be used with lock
out hubs or drive flange kits.
HD SLIMLOCK HUBS
The Tera60 HD SlimLock

hub assembly reduces width
dimensions for a minimal
side profile. The chromoly
construction
increases
strength and durability. The
stainless dial and ring features
a simple engagement and
defaults to the locked position.
91
Jk crd60 hd axles
The JK Tera CRD60 is built and assembled with specific components, bracketry,
and features to make the axle perfectly integrate with the JK Wrangler. This
includes JK specific heavy duty bearing pockets are designed for use of the
factory JK rear brake system including backing plate, parking brake assembly,
speed sensor, rotor and calipers. All bracketry is CAD designed and CNC laser cut
and formed, jig aligned and welded. Triple Stage UV powder coat protects the axle
from rust and corrosion. Tera CRD60 rear axles are available in 5x5semi float, or
8x6.5 full float. Full float axles can be ordered with the larger Dana Super 60 ring
and pinion gear sets (limited ratios available) for extreme duty applications.
4.30 SUPER 60
JK Rear CRD60 4.30 Super 60 ARB
JK REAR CRD60 FULL FLOAT AXLE ASSEMBLIES

JK Rear CRD60 No R&P or Carrier
JK REAR CRD60 SEMI FLOAT AXLE ASSEMBLIES

JK Rear CRD60 No R&P or Carrier
Right Hand Drive
4.30 SUPER 60
3460000 $2210.99
JK Rear Tera60 4.30 Super 60 ARB
4.56
3446430 $4083.99
JK Rear CRD60 4.56 ARB
4.56
3447456 $4083.99
4.88 SUPER 60
3470000 $4200.99
3406430 $5510.99
3407456 $5510.99
4.88 SUPER 60
3446488 $4083.99
3406488 $5510.99
5.13
5.13
3447513 $4083.99
5.38 SUPER 60
3407513 $5510.99
5.38 SUPER 60
3446538 $4083.99
3406538 $5510.99

JK Rear CRD60 Semi Float Axle Specs:
67 WMS - WMS
5x5 standard wheel bolt pattern (with optional 5x5.5 bolt pattern)
SPRING RETAINER PAD
The axle spring pad is

designed to retain the spring
and prevent the spring from
unloading. The spring pad is
laser cut from 1/4 steel for
superior strength, and formed
to fit the HD axle tube.
92
TRACKBAR POINTS
Multiple trackbar mounting

points allow you to fine tune
your rear suspension for proper
roll center and return to center
handling.

JK Rear CRD60 Full Float Axle Specs:
67 WMS - WMS
8 x 6.5 wheel bolt pattern
FLEXARM BRACKETS
Control arm bracketry is cut

and formed from 1/4 steel for
superior strength and features
multiple mounting locations to
fine tune suspension handling,
and fine tuning of anti-squat
geometry.
SWAYBAR MOUNTS
The
integrated
Swaybar
mount attaches to the rear
lower control arm mount, and
offers three mounting positions
which allow for extreme axle
dropout without requiring new
Swaybar links.
HD BEARING POCKETS
The JK specific heavy duty

bearing pockets allow the
factory JK brake system to
be retained. The bearing
pockets retain the use of the
factory ESP and speedometer
sensors.
Tj CRD60 hd axles
The TJ Tera CRD60 is built and assembled with specific components, bracketry,
and features to make the axle function as designed with the TJ Wrangler. This
includes TJ specific heavy duty bearing pockets that allow the factory JK rear
brake system including backing plate, parking brake assembly, rotor and calipers
to be retained. All bracketry is CAD designed and CNC laser cut and formed, jig
aligned and welded. Triple Stage powder coat protects the axle from rust and
corrosion. Tera CRD60 rear axles are available in dual pattern 5x5 & 5x5.5 semi
float, or 8x6.5 full float. Full float axles can be ordered with the larger Dana Super
60 ring and pinion gear sets (limited ratios available) for extreme duty applications.
Note: TJ full float axles are only available in 5x5.5 wheel bolt pattern.
No right hand drive applications are available for TJ axles.
TJ REAR CRD60 SEMI FLOAT AXLE ASSEMBLIES

TJ Rear CRD60 No R&P or Carrier
3360000 $2881.99
TJ Rear CRD60 No R&P or Carrier w/ Pro LCG Truss 3260000 $2881.99
4.30 SUPER 60
TJ Rear CRD60 4.30 Super 60 ARB
3346430 $4511.99
TJ Rear CRD60 4.30 Super 60 ARB w/ Pro LCG Truss 3246430 $4511.99
4.56
TJ Rear CRD60 4.56 ARB
TJ Rear CRD60 4.56 ARB w/ Pro LCG Truss
3347456 $4511.99
3247456 $4511.99
4.88 SUPER 60
3346488 $4511.99
5.13
TJ Rear CRD60 5.13 ARB
TJ Rear CRD60 5.13 ARB w/ Pro LCG Truss
3347513 $4511.99
3247513 $4511.99
5.38 SUPER 60
3346538 $4511.99
TJ Rear CRD60 Semi Float Axle Specs:
63.5 WMS - WMS
5x5.5 standard wheel bolt pattern (with optional 5x4.5 bolt pattern)
SMOOTH HOUSING
The CRD smooth bottom

design provides maximum
ground clearance and is
virtually unaffected by pinion
angle adjustment.
HD RIB GUSSETS
The unique finned housing

further aids in cooling and
reducing oil temperature. The
fins also add structural rigidity
to the housing to reduce case
distortion and deflection under
torque load.
CAST OIL SKIMMER
The CRD60 features a cast

oil skimmer to increase oil
flow to the pinion bearings.
This
exclusive
skimmer
forces maximum lubrication to
essential areas of the axle at
any RPM.
1/4 BRACKETRY
TeraFlex axle bracketry is

CNC laser cut and formed
for precise installation. All
bracketry is 3/16 steel,
providing additional strength
over factory bracketry.
DISC BRAKES
All TeraFlex rear TJ CRD60

axles can be fitted with our
rear disc brake kit. The disc
brake kit fits dual bolt pattern
5x5 & 5x5.5 for maximum
wheel compatibility.
93
Disc brake kits

JK FRONT BIG BRAKE KIT
The TeraFlex JK front big brake kit is designed as a factory brake upgrade for JK
owners looking for a performance brake package that will handle the increased
braking requirements needed after larger wheels and tires are used.
The simple bolt-on upgrade installation requires no cutting, welding or adapter
bracketry.
Oversized 56mm dual piston caliper increases clamping force and surface area
Composite-resin, semi-metallic pads increase pad life and reduce noise & dust
Note: A minimum of 17 diameter wheels must be run with the big brake kit.
JK Front Big Brake Kit

JK Front Big Brake Kit w/ Slotted Rotors
4303400
4303420

JK Front Big Brake Kit Brake Pads - All 4
4303410
4303412
4303411
4303430
$703.99
$733.99

$109.99
$137.99
$137.99
$76.99
JK FRONT PERFORMANCE BIG ROTOR KIT
JK Front Performance Big Rotor Kit

JK Front Performance Slotted Big Rotor Kit
4303480
4303490
$296.99
$318.99

4303410
4303412
4303411
$109.99
$137.99
$137.99
The TeraFlex disc brake kit is ideal for anyone wanting to upgrade a quality disc
brake package to their axles. This disc brake kit is intended for use as a bolt-on
upgrade to replace factory Jeep drum brakes. A kit is also available for axles using
Big Ford housing ends, such as the TeraFlex CRD60. The internal drum parking
brake provides outstanding holding power when compared to other disc brake
conversion kits. This kit is not intended for full size pickup use.
TJ Rear Disc Brake Kit w/ E-Brake Cables
4354425
$706.99
Complete kit - Includes everything required for a disc brake conversion, including two TJ
parking brake cables
JK REAR PERFORMANCE BIG ROTOR KIT
1991-2006 Jeep Rear Disc Brake Conversion Kit
4354420
$656.99
Fits all Jeep factory rear axles from 1991 through 2006 including the Dana 35 c-clip, Dana
44 and Chrysler 8.25
84-88 XJ, 87-90 YJ Rear Disc Brake Conversion Kit
4354410
$656.99
Fits XJ Cherokee non-c-clip rear axles and XJ Cherokee D44 axles up through 1988
Will NOT fit CJs, Commandos, or other Jeep models other than the above XJ applications
Ford Disc Brake Conversion Kit
4354400
$501.99
Fits Ford 9, 8.8,and custom TeraFlex housings using the Big Ford housing ends.
Ford Bronco Disc Brake Conversion Kit

The TeraFlex JK rear performance big rotor kit is the perfect upgrade for JK
Wrangler owners requiring increased braking performance with larger tires.
increasing the rotor diameter to 13.5. The increased clamping distance from the
rotor center results in greater braking leverage to allow stopping distance to be
decreased substantially (larger rotor diameter = greater stopping power). The
JK Rear Big Brake Rotor Kit
4304450
$399.99
94
4354444
$501.99
Use the chart on the next page to select the disc brake kit for your Jeep
DISC BRAKE REPLACEMENT PARTS

Disc Brake Hose Kit
Disc Brake Pad Kit - Complete Set of 4
Disc Brake Rotor - Each
Disc Brake Caliper - Each
Disc Brake Preload Spacer - TJ/Late Jeep
Disc Brake Preload Spacer - XJ/Early Jeep
Disc Brake Preload Spacer - Ford
4355400
8624
8622
862300
86261
86262
8636
$78.99
$43.99
$66.99
$109.99
$6.99
$6.99
$6.99
Brake kits & parts

DISC BRAKE HOSE KIT
Finish the brake line system when

installing a disc brake conversion on any
vehicle. This kit contains the necessary
hardware to connect the disc brake kit to
the brake hard lines. This kit is included
in the Jeep disc brake kits (4354420 &
4354410), but is not included in the Ford
disc brake kit (4354400).
Note: New shorter hard brake lines
must be installed. Available from most
auto parts supply stores.
Disc Brake Hose Kit
4350400
4353310
4354200
4353310
4350310
$162.99
$100.99
$55.99
$100.99
$100.99
$78.99
These DOT approved stainless steel braided brake lines are designed for most
late model Jeep applications. These stainless line kits will prevent line expansion,
thereby giving a much firmer-feeling pedal. All stainless brake lines are made to
MVSS-1006 specifications.
TJ Front & Rear Stainless Braided Brake Line Kit
TJ 26 Front Stainless Braided Brake Line Kit
TJ 26 Rear Stainless Braided Brake Line Kit - Single
JK 26 Front Stainless Braided Brake Line Kit
JK 30 Rear Stainless Braided Brake Line Kit
4355400
E-BRAKE CABLE LENGTH

Measuring and selecting the correct
length emergency brake cables
A
Excess inner
cable Length
C
Compressed
Spring Length
Housing Length
TECHNICAL INFORMATION
Actuator Lever
Selecting the correct disc brake kit

for your application
Jeep Kit - 4354420
Fits all Jeep factory rear axles from 1991 through 2006 including the Dana 35
c-clip, Dana 44 and Chrysler 8.25. Parts are interchangeable with factory disc
brakes on the ZJ and the Rubicon and the Unlimited with factory rear disc brakes
1984-1988 XJ & 1987-1990 YJ Kit - 4354410
Fits XJ Cherokee non-c-clip rear axles and XJ Cherokee D44 axles up through
1988
Ford Kit - 4354400
Fits some Ford Factory 9 inch housings and 8.8 housings and the custom HD axles
that we build at TeraFlex using the Big Ford New Style housing ends #3000835
4354400 & 4354410
4354420
Equalizer
Backing Plate
Retainer Bracket
Part
Number
4304169
4304170
4304171
4304172
4304173
4304174
4304175
A
Length
2.445"
9.070"
9.820"
9.820"
5.945"
5.945"
2.445"
B
Length
34.615"
45.240"
50.990"
22.990"
51.240"
22.240"
59.240"
C
Length
4.44"
4.44"
4.44"
4.44"
4.44"
4.44"
4.44"
Common Applications
TJ 1997-2006 Both Sides/ XJ 1997-2001 LH
Universal
YJ 1991-1995RH/ XJ 1984-1996 Both Sides
YJ 1991-1995 LH
YJ 1987-1990 RH
YJ 1987-1990, LH
XJ1997-2001 RH
EMERGENCY BRAKE CABLE

This kit will provide your TJ Wrangler
rear disc brake conversion with a new
emergency brake cable. This cable will
not work with stock drum brakes, and will
only work with the TeraFlex Disc Brake
Kit, or factory Jeep disc brake kits after
2003. Sold individually, order two for a
full axle. Use the E-Brake Cable Chart to
select the e-brake cable for your specific
application.
Notes:
This kit does not work with ABS sensors. You will not be able to install the ABS sensors into
the disc brake mount backing plate.
Some factory Jeep 15 Wheels may rub on the caliper. Do NOT operate the vehicle until you
confirm adequate caliper/wheel clearance.
Most aftermarket wheels, especially alloy wheels, require longer wheel studs when installing a
disc brake kit. Use NAPA #641-3204 for the longer Jeep rear wheel stud.
You may cut a slot in the pre-load ring and slide it over the axle shaft if you do not want to
replace the wheel bearings.
Total Length= (A+B+C) Common Application

Total Length 41.5
TJ 97-06 L&R / XJ 97-01 LH
Total Length 58.75
Universal
Total Length 65.25
YJ 91-95 RH / XJ 84-96 L&R
Total Length 37.25
YJ 91-95 LH
Total Length 61.63
YJ 87-90 RH
Total Length 32.63
YJ 87-90 LH
Total Length 66.13
XJ 97-01 RH
4304169
4304170
4304171
4304172
4304173
4304174
4304175
$49.99
$49.99
$49.99
$49.99
$49.99
$49.99
$49.99
95
Axle Steering components

JK DANA 30 & 44 HIGH STEER SYSTEM
TeraFlex JK high steer system provides a heavy duty solution for several weak
vulnerabilities found in the stock JK axle steering configuration. This kit is designed
to work perfectly on JK wranglers with 4-6 of lift, and will maintain steering
geometry at the correct angles for superior highway drivability and increases tie
rod ground clearance by over 1-1/8 to reduce tie rod damage and bending.
The high steer knuckle is cast from heavy duty ductile iron and features
reinforcements in key section areas that are prone to stress and deflection.
4390975
JK High Steer System w/ Drag Link End

JK High Steer System w/ Complete Drag Link
JK HIGH STEER KNUCKLE KIT

TeraFlex JK high steer is cast
from heavy duty ductile iron and
features reinforcements in key
section areas that are prone
to stress and deflection, and
provides a heavy duty solution
for several weak vulnerabilities
found in the stock JK axle
steering configuration. This kit
is designed to work perfectly
on JK wranglers with 4-6 of
lift, and will maintain steering
geometry at the correct angles
for superior highway drivability and increases tie rod ground clearance by over
1-1/2 to reduce tie rod damage and bending.
JK High Steer Knuckle Kit (knuckles only)
4390870
$499.99
4390875 $989.99
4390975 $1159.99
WHEEL OFFSET ADAPTER KIT
The wheel adapter will provide a 1.25 offset for factory wheels for additional tire
clearance when turning. The wheel spacer is not intended for wheels wider than
8 or aftermarket wheels with less than 4 of backspacing. All wheel adapters are
machined from aluminum, except Part #1055010 which is steel.
Sold in pairs.
JK Wheel Offset Adapter Kit - 5x5 to 5x5
TJ Wheel Offset Adapter Kit - 5x4.5 to 5x4.5
TJ Wheel Offset Adapter Kit - 5x4.5 to 5x5
Wheel Offset Adapter Kit - 5x5.5 to 5x5.5
1055000
1005200
1055045
1055020
$101.99
$132.99
$132.99
$151.99
JK HD TIE ROD KIT

HD REPLACEMENT BALL JOINT KIT

1853900
The TeraFlex HD tie rod & drag link kit is designed for extreme conditions that
typically will cause factory steering components to bend and fail. The HD 1.6 O.D.
4140 heat treated chromoly tie rod is over 200% stronger than the factory tie rod.
The forged tie rod end housing is designed specifically for JKs and allows proper
clearance for use with factory 17 wheels. The tie rod end joint incorporates the
same features found in our ball joints, including a 4140 chrome moly Ball/stud
and 1045 carbon steel housing. It also features adjustable preload tension to
ensure proper long term durability. The joint is pressed into the rod end housing
and secured with a snap ring. When oriented in the Tie Rod configuration, the joint
offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow
maximum turning. The drag link is fully forged to eliminate any excess movement
during hard steering maneuvers and utilizes a factory style adjusting collar and
pinch clamp for simple adjustments.
JK HD Tie Rod & Drag Link Kit
JK HD Tie Rod & Flipped Drag Link Kit
1853900
1853905
$749.99
$749.99

JK HD Tie Rod
JK HD Drag Link
JK HD Flipped Drag Link
1853910
1853920
1853930
$399.99
$379.99
$379.99
TeraFlex HD ball joints are

engineered to handle the
increased load caused by
oversized tires and offset
wheels. The upper ball
joint incorporates hard
sintered wear bushings to
handle extreme side load
3442002
demands with out failure.
The lower ball joint
features a threaded top
cap for adjustable preload
and allows grease servicing without axle shaft removal, even with larger RCV
shafts. A machined grease passage in the lower joint housing assembly provides
lubrication access without affecting the ball joint load surface.
These ball joints fit 2007-2012 JK Wrangler Dana 30 and Dana 44 axles.
JK Ball Joint Upper & Lower Kit - w/out knurl
JK Ball Joint Upper & Lower Kit - w/ knurl
JK Ball Joint Upper & Lower Set of 4 - w/out knurl
JK Ball Joint Upper & Lower Set of 4 - w/ knurl
3440000
3440020
3442002
3442022
$125.99
$125.99
$249.99
$249.99
Dana 60 Ball Joint Upper & Lower Kit - w/out knurl

3600000
Dana 60 Ball Joint Upper & Lower Kit - w/ knurl
3600020
Dana 60 Ball Joint Upper & Lower Set of 4 - w/out knurl 3602002
Dana 60 Ball Joint Upper & Lower Set of 4 - w/ knurl 3602022
$175.99
$175.99
$349.99
$349.99
96
Full Float axle components

DRIVE FLANGE KIT
DANA 60 SLIMLOCK HUB KIT
The drive flange kit eliminates the lockout hub for rear full float applications. The
drive flange is constructed of high quality gear steel and machined from a solid
block for ultimate strength. The cap is machined from aluminum, and comes with
o-ring and bolts for installation.
Drive Flange Kit
3000842
$249.99
JK 8-LUG FRONT FULL FLOAT KIT
The TeraFlex SlimLock 35 spline hub kit is built to handle extreme conditions and
abuse. Polished 304 stainless steel dial construction resists corrosion for trouble
free use and smooth operation. 4140 quench and tempered chromoly hub and
shaft cogs feature hardened teeth to maintain precise engagement under torque
load. A bronze bushing sleeve reduces wear between the hub and driver for long
term durability.
This hub kit is designed for Dana 60 35 spline applications.
SlimLock Hub Kit
3449350
$399.99
JK DANA 44 8-LUG REAR FULL FLOAT KIT
The TeraFlex JK front full float conversion kit is designed to upgrade JK Dana 30
and 44 axles. The full float conversion delivers several major benefits over a factory
unit bearing design. We are able to dramatically reduce bearing load by increasing
the distance between the inner and outer wheel bearings within the hub. These
bearings ride on a forged 4140 chromoly spindle that accept readily available low
cost industry standard bearings and seals. By incorporating an 8 on 6.5 wheel bolt
pattern we are able to use one-ton Dana 60 application components throughout.
The unique TeraFlex hub design allows for OE wheel speed sensors to be
completely sealed from mud, rock and other damaging contaminants, ensuring
clear constant data transmission to maintain all ABS and ESP functions.
The SlimLock hub kit features forged 4340 chromoly 35 spline stub shafts. The
hub design incorporates high surface area engagement with extreme durability.
This kit is perfect for flat towing by allowing the hubs to be set in the unlocked
position during transport.
The full float conversion is available with either the TeraFlex performance rotor kit
or dual piston big brake kit.
Note: 2007-2012 Dana 30 axles will require new inner shafts with the larger u-joint end
forgings (#303118 for driver side and 303134 for passenger side). All 2013+ Dana 30 & Dana
44 JK axles use the same U-joint.
JK Front Full Float Kit w/ Performance Rotors

3034411 $1980.99
JK Front Full Float Kit w/ Performance Slotted Rotors 3034410 $2005.99
JK Front Full Float Kit w/ Big Brake Kit
3034412 $2390.99
JK Front Full Float Kit w/ Big Brake Kit - Slotted Rotors 3034413 $2415.99
The factory rear JK axle and wheel bearing assembly naturally lends itself to
bent axle shafts. Heavy wheels and oversize tires, high speed impacts, low range
twisting and binding take their toll on factory style axle shafts. Even an upgraded
35 spline conversion shaft is subject to these same design limitations. The solution
is the TeraFlex JK rear full float conversion. By utilizing a two wheel bearing design,
vehicle weight is spread evenly across the forged 4140 chromoly spindles. Readily
available industry standard bearings are oil bathed and require zero maintenance.
Because the axle shaft no longer supports any vehicle weight, the case hardened
35 spline 4340 chromoly shafts simply transfer the torque without the load stresses
associated with impact and vehicle weight.
All factory sensors are maintained and protected, and the OE park brakes as
well as the calipers and pads are retained. TeraFlex 13.5 performance rotor and
anchor bracket are included for increased and balanced braking.
JK Rear Full Float Kit w/ Performance Rotors- Non-Rubicon 30 spline

3043000 $1880.99
JK Rear Full Float Kit w/ Performance Slotted Rotors- Non-Rubicon 30 spline

3043100 $1905.99
JK Rear Full Float Kit w/ Performance Rotors - Rubicon 32 spline

3043200 $1880.99
JK Rear Full Float Kit w/ Performance Slotted Rotors - Rubicon 32 spline

3043300 $1905.99
97
Axle Bracket Kits

JK FRONT AXLE BRACKET KIT
TJ FRONT AXLE BRACKET KIT
The JK front axle bracket kit is designed for new CRD60 axle applications that
will be installed in JK vehicles. The heavy duty bracketry is CNC cut from 1/4
steel, and precision bent. The HD lower control arm mount also features a skid
plate to prevent control arm damage and keep you from hanging up on obstacles.
The control arm bracketry also allows multiple mounting locations for fine tuning
suspension geometry. The trackbar features multiple mounting locations as well to
fine tune front roll center. Fits 3.25 O.D. tube.
Sold as a complete kit, raw steel, ready for paint or powder coating.
The TJ front axle bracket kit includes all brackets necessary for a complete TJ front
end for a Dana 44 axle. The front trackbar mount includes adjustable mounting
positions for the trackbar. The brackets are precision laser cut from 3/16 steel and
accurately formed to ensure proper positioning. Fits 3.25 O.D. tube.
Sold as a complete kit, raw steel ready for paint or powder coating.
TJ Front Axle Bracket Kit
JK Front Axle Bracket Kit
3990700
3991100
$677.99
TJ FRONT AXLE BRACKET COMPONENTS
JK FRONT AXLE BRACKET COMPONENTS

JK Front Axle Shock Mount (order qty 2)
JK Front Axle Swaybar mount (order qty 2)
JK Front Axle Upper Flexarm Mount - Pass (CRD60)
JK Front Axle Upper Flexarm Mount - Pass (Dana 44)
JK Front Axle Upper Flexarm Mount - Driver (CRD60)
JK Front Axle Spring Pad - Passenger
JK Front Axle Spring Pad - Driver
JK Front Axle Trackbar Mount
JK Front Axle Lower Flexarm Mount - Driver
JK Front Axle Lower Flexarm Mount - Passenger
3990720
3990730
3990750
3990740
3990753
3990770
3990771
3990780
3990791
3990790
TJ Front Axle Spring Pad - Driver Side

TJ Front Axle Spring Pad - Passenger Side
TJ Front Axle Truss w/ Upper Mount - Driver Side
TJ Front Axle Upper Flexarm Mount - Passenger Side
TJ Front Axle Lower Flexarm Mount - Driver Side
TJ Front Axle Lower Flexarm Mount - Passenger Side
TJ Front Axle Trackbar Mount
TJ Front Axle Shock Mount - Driver Side
TJ Front Axle Shock Mount - Passenger Side
TJ Front Axle Swaybar Mount - Each
$24.99
$20.99
$136.99
$136.99
$96.99
$79.99
$71.99
$128.99
$41.99
$41.99
The JK rear axle bracket kit is designed for new axle applications that will be
installed in JK vehicles. The heavy duty bracketry is CNC cut from 1/4 steel,
and precision bent. The HD lower control arm & shock mount also features a
skid plate to prevent shock damage and keep you from hanging up on obstacles.
The flexarm bracketry also allows multiple mounting locations for fine tuning
suspension geometry. The trackbar features multiple mounting locations as well to
fine tune rear roll center. Fits 3.25 O.D. tube.
Sold as a complete kit, raw steel, ready for paint or powder coating.
3990007
JK REAR AXLE BRACKET COMPONENTS
98
$43.99
$43.99
$219.99
$73.99
$49.99
$49.99
$104.99
$16.99
$16.99
$18.99
3990060
3990070
3990090
3990091
3990080
3990050
3990051
The TJ rear axle bracket kit includes all brackets necessary for a complete TJ rear
end. The brackets are precision laser cut from 3/16 steel and accurately formed
to ensure proper positioning. Fits 3.25 O.D. tube.
Sold as a complete kit, raw steel ready for paint or powder coating.
TJ Rear Axle Bracket Kit
3990000
$555.99
$545.99
JK Rear Axle Bumpstop Pad (order qty 2)

JK Rear Axle Coil Spring Pad (order qty 2)
JK Rear Axle Lower Flexarm Mount - Driver
JK Rear Axle Lower Flexarm Mount - Passenger
JK Rear Axle Trackbar Mount
JK Rear Axle Upper Flexarm Mount - Passenger
JK Rear Axle Upper Flexarm Mount - Driver
3990291
3990292
4000009
3992790
3992861
3992862
1943070
3992871
3992872
4000010
TJ REAR AXLE BRACKET KIT
JK REAR AXLE BRACKET KIT
JK Rear Axle Bracket Kit
$661.99
$37.99
$39.99
$94.99
$94.99
$104.99
$46.99
$46.99
TJ REAR AXLE BRACKET COMPONENTS

TJ Rear Axle Spring Pad - Each
TJ Rear Axle Upper Flexarm Mount - Driver Side
TJ Rear Axle Upper Flexarm Mount - Passenger Side
TJ Rear Axle Trackbar Mount
TJ Rear Axle Swaybar Mount - Driver Side
TJ Rear Axle Swaybar Mount - Passenger Side
TJ Rear Axle Shock Mount - Driver Side
TJ Rear Axle Shock Mount - Passenger Side
TJ Rear Axle Lower Flexarm Mount - Driver Side
TJ Rear Axle Lower Flexarm Mount - Passenger Side
3990250
3990211
3990212
3990220
3990231
3990232
3990241
3990242
3992861
3992862
$93.99
$39.99
$39.99
$82.99
$37.99
$37.99
$32.99
$32.99
$47.99
$47.99
axle components
TJ HIGH STEER SWAYBAR MOUNT
HEAVY DUTY DIFFERENTIAL COVER KIT
3990630
3990650
Raise the swaybar mount up and out of the way to make clearance for custom
steering components. The mount is laser cut and formed from 3/8 steel for
durability and strength. welding is required.
4959101
4959102
$52.99
$52.99
TJ PRO LCG LONG FLEXARM BRACKETS
ensure protection.
3990630
3990650
3990660
$93.99
$103.99
$135.99
JK LCG PRERUNNER SPEEDBUMP BUMPSTOP KIT
1958251
1958260
The TeraFlex prerunner SpeedBump Bumpstop kit features 3 stroke bumpstops

at all four corners for maximum suspension control.
TJ LCG Lower Long Flexarm Frame Bracket Kit
TJ Pro LCG Front Upper Bracket - Driver
TJ Pro LCG Front Upper Bracket - Passenger
TJ Pro LCG Rear Upper Bracket - Driver
TJ Pro LCG Rear Upper Bracket - Passenger
TJ Pro LCG Rear 4-link Axle Truss
1447701
9791
9792
97881
97882
1944044
$414.99
$50.99
$50.99
$70.99
$70.99
$293.99
JK Front prerunner SpeedBump Bumpstop Kit

JK Rear prerunner SpeedBump Bumpstop Kit
1958251
1958260
$469.99
$503.99
SPEEDBUMP BUMPSTOP ADJUSTMENT SPACER KIT
JK KNUCKLE GUSSET & AXLE SLEEVE KIT
1/4 & 3/4 Adjustment Spacer Kit

1/4, 3/4, & 2 Adjustment Spacer Kit
1944730
1944740
$16.99
$26.99
4954770
1944780
1944790
$51.99
$23.99
$25.99
SPEEDBUMP MOUNTING KIT
JK Axle Sleeve Kit

JK Axle Sleeve & Upper Knuckle Gusset Kit
JK Upper Knuckle Gusset Kit - Pair
JK Lower Knuckle Gusset Kit - Pair
4990700
4990900
4990800
4990910
$90.99
$133.99
$43.99
$47.99
Install Time: 5 hours (Complete Kit)

Install Time: 4 hours (Sleeve Kit)
1944780
4954770
3 SpeedBump Mounting Sleeve w/ Clamp - Pair

99
Recovery gear & accessories

Recovery gear
Apparel
Stickers
Print material
Recovery gear
TRAIL RECOVERY KIT
RECOVERY TOW HOOK

Tow Hooks provide a recovery point for
tow straps and winch cable, which will
help you out of a sticky situation. These
tow hooks easily mount to the frame of
your Jeep, and are rated for 10000 lbs.
They were specifically designed to mount
to the front of the TJ Wrangler frame, but
can be mounted universally also to any
vehicle.
Recovery Tow Hook
4803100
$11.99
D-RING MOUNT KIT

The bolt on d-ring mount kit is designed
as a universal recovery point, it does
require some drilling for the mounting
holes. The kit comes with the d-ring
mount, backing plate for strength, and
hardware. Sold in pairs.
The TeraFlex Recovery Gear Bag is designed as a premium recovery kit that
incorporates all of the basic recovery tools that you will realistically need when
performing various pulling tasks with your Jeep. The kit features our heavy duty
tool bag, 7 tree strap with 20000 lb. rating, 30 tow strap with 20000 lb. rating, two
d-ring shackles, and a key chain air deflator.
This kit is an incredible value - Just add up all the components separately and you
will see for yourself! Dont go out on any trail without this essential recovery kit in
the back of your Jeep!
Trail Recovery Kit
D-Ring Mount Kit
4603300
5028995
$120.99
$96.99
TOOL & GEAR BAG
D-RING SHACKLE
Complete your bumper with these
recovery d-ring shackles. The zinc plated
shackles provide an attachment for
connecting looped ends of straps and
snatch blocks. Sold individually.
D-Ring Shackle - Skin Packed

D-Ring Shackle - Boxed
4802100
4802190
$16.99
$16.99
GRAB HANDLE KIT
The TeraFlex Gear & Tool Bag

is designed as a premium bag
that will provide years of durable
service, and will keep your tools
and accessories organized
and within quick reach. The
bag features a high quality 600
denier nylon material, with 3/8
HD slider zipper reinforced with
1 webbing to prevent zipper
separation. The tool bag also
features reinforced internal
metal framing for ultimate strength at zipper points, heavy duty double stitched
web handle straps, with bar tacking at all stress points, and padded bottom. The
bag also features 8 exterior and 9 interior pockets for small items storage.
Tool & Gear Bag
5028900
$28.99
RECOVERY STRAP
JK Front Grab Handle Kit - Pair
4830301
$39.99
JK Rear Grab Handle Kit - Pair
4830302
$43.99
4830300
$38.99
4830301
$39.99
4830301
$39.99
4830302
$43.99
AIR DEFLATOR KEYCHAIN

These air deflators are a must have for
any trail vehicle. Airing down your tires
increases traction and handling when offroad. A keychain ring keeps them close
at hand. Constructed of zinc plated steel
for durability.
Air Deflator Keychain
102
The tow strap is designed for those unlikely situations where you have to pull out
the strap - for your friend of course. The strap features a 20000 lb. rating with red
stress thread for a visible warning of potential strap failure. It measures 30 long x
2 wide, with reinforced stitched loop ends.
The tree strap was designed to use as a winch point from a tree without damaging
the tree. It has plenty of strength and flex to pull you out of those tough places
while leaving mother nature intact. 3 x 7.
4807200
$14.99
Recovery Tow Strap

Recovery Tree Strap
4800100
4800101
$58.99
$28.99
Hats & apparel

PRO-STYLE STRETCH HAT
VINTAGE DISTRESSED HAT
ARMY CADET HAT
Back
Back
TeraFlex Icon Baseball Cap

92% polyester, 8% spandex
Breathable Sports Stretch fit,
Black
one size fits most
Red
Black or Red

TeraFlex Worn Baseball Cap

100% cotton, unstructured
Adjustable hook & loop back
Tan
5237003
5237004
$14.99
TERAFLEX SCRIBBLE T-SHIRT
5237000
TeraFlex Military Style Cap

100% cotton
Adjustable hook & loop back
Olive Drab
Olive Drab or Black
Black & Pink

$14.99
TERAFLEX TRACKS T-SHIRT
5237001
5237002
$14.99
HOODY SWEATSHIRT
Front
Back
Front
Front
Mens TeraFlex Scribble T-shirt,
100% cotton, 6.1 oz.,
red,
grill scribble logo on front, JK scribble print on back
Medium
Large
X-Large
2X-Large
3X-Large
Mens TeraFlex Tracks T-shirt,

100% cotton, 6.1 oz.,
black,
distressed tire track graphic logo on front
Medium
Large
X-Large
2X-Large
3X-Large
5218715
5218716
5218717
5218718
5218719
Hoody Tracks Sweatshirt w/pockets,

50/50 9.5 oz., Black,
logo on front
$14.99
LADIES TRACKS T-SHIRT
Medium
Large
X-Large
2X-Large
3X-Large
5218710
5218711
5218712
5218713
5218714
5230000
5230001
5230002
5230003
5230004
$14.99
KIDS TRACKS T-SHIRT
$35.99
BABY ONESIE
Front
Front
Ladies Tracks T-shirt,

100% cotton, distressed tire track graphic logo on front
ORCHID
Small
Medium
Large
X-Large

Front
Kids Rock On T-shirt,

5 oz. 50/50 cotton,
distressed tire track graphic logo on front
5219710
5219711
5219712
5219713
$14.99
GRAY
Kids Small (6-8) 5216710

Kids Med (10-12) 5216711

$14.99
Infant Rock On Onesie

100% cotton, white,
JK graphic print on front
18-24 Month

5215710
$14.99
103
Stickers & decals

TERAFLEX 4.5 ICON DECALS
The TeraFlex icon sticker is die cut from 3mil, 7

year vinyl, and has a transfer tape surface for easy
installation. 4.5 wide x 4.5 high. Sold individually.
4.5 Icon Decal - White
4.5 Icon Decal - Silver
4.5 Icon Decal - Black
4.5 Icon Decal - Red
4.5 Icon Decal - Pink
5131530
5131531
5131532
5131533
5131534
LEATHER MONEY CLIP
TERAFLEX STICKERS
$2.99
$2.99
$2.99
$2.99
$2.99
Stickers are die cut from 3mil, 7 year vinyl.

Sold individually.
8 Original Logo Sticker
26 Original Logo Sticker
5131208
5131526
$1.99
$8.99
The TeraFlex money clip hand crafted by Palm West
and is constructed from top grain bridle leather and
features attractive contrast stitching. RFID blocking
technology protects two outside card sleeves that
hold up to three cards in each sleeve (six total cards),
and the specially designed spring-clip provides easy
access to cash.
TERAFLEX DECALS
TERAFLEX COMPONENT STICKERS
TeraFlex Money Clip

These TeraFlex logo stickers are die cut from 3mil, 7
year vinyl, and have a transfer tape surface for easy
installation .
Available in 10, 28 and 45 wide. Sold individually.
10 Logo Decal - Silver
10 Logo Decal - Black
28 Icon Decal - White
28 Icon Decal - Silver
28 Icon Decal - Black
28 Icon Decal - Red
28 Icon Decal - Pink
45 Logo Decal - Silver
45 logo Decal - Black
5131202
5131203
5131540
5131541
5131542
5131543
5131544
5131524
5131525
$2.99
$2.99
$6.99
$6.99
$6.99
$6.99
$6.99
$8.99
$8.99
5000950 $29.99
TERAFLEX CAN COOLER

Flexarm Sticker
5131209
9550 Shock Sticker
5117301
$1.99
Nothing beats a frosty

cold beverage after a long
hot day out on the trail.
The TeraFlex can cooler
will help keep it cold!
$2.99
TeraFlex Can Cooler
TERAFLEX WINDSHIELD DECAL
5000850
$2.99
TERAFLEX KEYCHAIN
Stickers are die cut from 3mil, 7 year vinyl.

48 wide. Sold individually.
White Windshield Decal
Silver Windshield Decal
5131200
5131201
$8.99
$8.99
TERAFLEX 2 X 4 BANNER
Make your garage the coolest hangout spot in the
neighborhood! This large 2x4 banner is perfect
for that blank area on your wall and will leave no
doubt who your favorite suspension company is.
Constructed of 7 year vinyl.
2 x 4 Banner
5831401
Warning To Driver Sticker
600196
$1.99
Keep your keys from getting lost on the trail, and
show everyone who makes the best suspension out
there! Made from rubberized PVC for durability and
long term wear.
TeraFlex Keychain
5000847
$2.99
TERAFLEX LANYARD
$9.99
TERAFLEX 3 X 6 BANNER
This banner works well in outdoor locations, and
is perfect for your install bay or parking lot. Show
everyone that you represent the best in off-road
performance!
3 x 6 Banner
5831402 $17.99
Even though you may be stuck in the corporate office

world during the week, you can still sneak in a little of
your favorite hobby. Attach your I.D. Badge, keys, or
whatever you want!
TeraFlex Lanyard
104
5131214
$2.99
Printed materials
TERAFLEX 24 X 36 POSTER
TERAFLEX 2015 PRODUCT GUIDE
TERAFLEX 2015 CATALOG

$5.OO5
08-1
6009
DE
AL
D QU
MAN
RIER
PS
HD CAR
& TIRE
ITY
g
& BOD
ION
pr
2015
TECT
Y PRO
PERS
BUM
G KITS
NTIN
MOU
o
atal
ct c
odu
PSTO
MP BUM
DBU
ONS
IUM
PREM
S&
Y DUTY
AXLE
JEEP
SPEE
ENSI
SUSP
ENTS
PON
COM
HEAV
Decorate your office or garage wall. This 24 x 36

poster is printed on 90 lb. matte poster paper with
a matte aqueous coating to resist fingerprints and
smudges.
The 2015 TeraFlex product catalog is an essential

reference for TeraFlex customer, dealers and
distributors to use in researching and purchasing
TeraFlex products.
The 2015 TeraFlex product guide gives product

information and pricing on our most popular items in
a compact and simple tri-fold brochure. Perfect for
sales floor literature stands and information kiosks
at off-road events.
24 x 36 Poster
2015 Catalog
2015 Product Guide
5831300
$2.99
600908
$5.00
600928
$.49
Notes
WARRANTY POLICY:
TeraFlex Inc. warrants TeraFlex products to the original retail purchaser to be free of defects in material and workmanship for as long as the original purchaser owns the
vehicle on which products were originally installed.
Failure to complete regular maintenance (grease every 3000 miles) on TeraFlex flexarms will void this warranty. All other conditions of the standard TeraFlex Inc. product
warranty apply.
All TeraLow products are covered by the TeraFlex Inc. two-year warranty to be free of defects in material and workmanship for two years from date purchased.
TeraFlex axles are covered by the TeraFlex Inc. 12-month warranty to be free of defects in materials and workmanship.
This warranty does not cover or include product finish, improperly installed or applied products, improperly maintained products, products used for racing or competition
or damage due to abuse or neglect.
All returns must be accompanied by an original invoice. It is the customers responsibility to remove the product from the vehicle. Inbound shipping charges (from you to
us) are the responsibility of the customer. TeraFlex Inc. will pay the return freight.
WARNING: Neither the seller nor the manufacturer will be liable for any loss, damage, or injury directly or indirectly arising from the use of or inability to determine the
use of these products. Before using, the user shall determine the suitability of the product (s) for its intended use(s), and the user shall assume all responsibility and risk
in connection therewith.
Copyright 2014. All rights reserved, TeraFlex Inc. Reproduction of this catalog and/or any of its contents without written permission is strictly prohibited.
TeraFlex is a registered trademark of TeraFlex Inc. All trade names and logos including but not limited to TeraFlex, flexarms, RockGuard, Monster, and LCG are protected
by law and duplication of trade names and/or logos is strictly prohibited.
TeraFlex Inc. reserves the right to update, discontinue, redesign, modify finish, change part numbers or component build parts, and pricing if deemed necessary without
written notice. TeraFlex Inc, and any associated dealers are not responsible for misprints or typographical errors that may have inadvertently been made within this catalog,
or pricing sheets.
Jeep and the Jeep grill are registered trademarks of Fiat Chrysler Automobiles N.V., and have no affiliation with TeraFlex Inc.
105
TERAFLEX INC.
5680 W Dannon Way
West Jordan, Utah 84081
phone: 801-713-3314
fax: 801-713-2313
www.teraflex.com
$5.OO
600908-15
Fueling your passion

TeraFlex 2015 Catalog

Uploaded by

Copyright:

Available Formats

TeraFlex 2015 Catalog

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TeraFlex 2015 Catalog

Uploaded by

Copyright:

Available Formats

2015 product catalog

Fueling your passion

JK WRANGLER & UNLIMITED

TJ WRANGLER & UNLIMITED

JK ActionTruck Conversion Kit

HD MONSTER FLEXARM JOINTS

Monster flexarm Joints

LOW RANGE GEARING

AXLES & COMPONENTS

Dana 300 Low Range Kit

RECOVERY GEAR & APPAREL

STICKERS & PRINT MEDIA

Trail Recovery Bag

NOTES & WARRANTY

DEMAND QUALITY - GET THE TERAFLEX ADVANTAGE.

Jk actiontruck conversion kit

JK ActionTruck Conversion Kit

Install Time: 15 hours

By using existing mounting

SIDE CARGO DOORS

The locking panels open to

REMOVABLE SUN TOP

With a quad-latch clamping

TO ORDER CALL 801-713-3314 OR ONLINE AT TERAFLEX.COM

The hand laid fiberglass onepiece bed provides a strong

REAR LIFT WINDOW

The rear lift window allows

Under extreme articulation the

Articulation with the LCG

REAR TRACKBAR KIT

Proper suspension geometry

All flexarms use exclusive

DEMAND QUALITY - GET THE TERAFLEX ADVANTAGE.

Jk 6 & 4 elite lcg Suspensions

Install Time: 22 hours + 2 hours (SpeedBump) + .5 hour (reservoir shocks)

JK 4 ELITE LCG LONG FLEXARM SUSPENSION SYSTEM

Install Time: 18 hours + 2 hours (SpeedBump) + .5 hour (reservoir shocks)

TO ORDER CALL 801-713-3314 OR ONLINE AT TERAFLEX.COM

Jk 3 & 2.5 elite lcg

Install Time: 17 hours + 2 hours (SpeedBump) + .5 hour (reservoir shocks)

JK 2.5 ELITE LCG LONG FLEXARM SUSPENSION SYSTEM

JK ELITE LCG LONG FLEXARM UPGRADE KIT

Install Time: 17 hours + 2 hours (SpeedBump) + .5 hour (reservoir shocks)

Install Time: 12 hours

DEMAND QUALITY - GET THE TERAFLEX ADVANTAGE.

Jk ELITE lcg prerunner

JK Prerunner LA System - No Shocks

FOX RACING LONG TRAVEL SHOCKS

UPGRADE YOUR LIFT TO A

JK PRERUNNER COMPONENT KIT

JK prerunner Component Kit

The TeraFlex prerunner SpeedBump Bumpstop kit features 3 stroke bumpstops

JK front prerunner SpeedBump system kit

Install Time: 4 hours

TO ORDER CALL 801-713-3314 OR ONLINE AT TERAFLEX.COM

Install Time: 7 hours

DEMAND QUALITY - GET THE TERAFLEX ADVANTAGE.

Jk Outback overland suspension

FOX RACING LONG TRAVEL SHOCKS