ETA-04 / 0038

New
Dimensions
ASDO Tie-Rod System
M 12 - M 160

a simple solution for difficult tasks

The ASDO Tie-Rod System

Whether for wind bracing, pylon
stays or bowstring trusses - the new
ASDO tie-rod system offers you
optimum :
Quality
Aesthetics
Load-bearing performance
Functionality
Economy

System overview
Tie-rod system
ASDO-S (carbon steel)
ASDO-E (stainless steel)
Compression-rod system
ASDO-DS (carbon steel)
ASDO-DE (stainless steel)

The new

Page 2/3
Introduction / General technology
Page 4/5
ASDO-S carbon steel tie-rod system
ASDO-E stainless steel tie-rod system
Page 6/7
Technical data of system components
Page 8/9
ASDO-D compression-rod system
Design and installation information
Page 10/11
Orders form / special solutions

Shape

System advantages
The ASDO system is the only tierod and compression-rod system
that meets the demanding
European Technical Approval CE
ETA-04/0038 for nominal sizes
up to M 160, also in stainlesssteel version
Fork connectors of cast steel in
conjunction with high-strength
tie-rod enable system loads up
to 9,568 kN
Uniform fork connector design
for all nominal sizes
Identical system components and
connection dimension for steel
and stainless-steel version
All components are stable at low
temperatures (at least 27J/-20C)
FEM-supported fork connector
design with almost homogeneous tension distribution
Pin lock flush with fork connector
contour
Single rod lengths up to 22 m
possible
Simple visual checking of minimum screw-in depth (no thread
cover sleeve or inspection hole
required)
All tie-rod components are also
available in hot galvanized version
Cut or rolled thread version
Checked pre-tensioning possible

for
optimised

Anchors from ANKER-SCHROEDER have proven themselves for many decades in a

broad range of structures the world over. With more than 80 years of experience in the
anchoring sector and the new ASDO tie-rod system with EuropeanTechnical Approval,
we offer you a complete package for technically and aesthetically perfect solutions
for your specific applications.
If you have questions or suggestions, talk to us ! Well be happy to develop special
proposals together with you.

The ASDO tie-rod system

Fork connector
Using computer-supported FEM
analysis we have succeeded in
creating a new shape and weightoptimized fork connector design.
An almost uniform tension distribution over the entire cross-section
opens up new application possibilities with regard to material fatigue.
The characteristic design in conjunction with the recessed pin lock
result in an unmistakable overall
concept. The recesses in the flanks
on the sides enable the viewer to
recognize and understand the force
curve.

Components
The components, consisting of the
fork connector, pins, turnbuckle,
coupler and circular plate, are
designed so that they can absorb
higher loads than the tie-rod. To
ensure the full load-bearing capacity
of the system in the area of the
connection design, only connection
plates of quality S355J2G3
according to EN 10025 may be
used.

As an option, we offer thread cover

sleeves as an accessory, these
enable a harmonious transition from
the tie-rod to the fork connector,
turnbuckle or coupler connection
components. in addition, the tie-rod
thread is hidden and simultaneously
locked. Thread cover sleeves for fork
connectors are also supplied in a
cast finish. In combination with the
fork connector a smooth, uniform,
appearance results.

Corrosion protection
Optimum corrosion protection for the
systems ASDO-S and ASDO-DS is
offered by hot galvanizing according
to ISO 1461.
For system sizes up to M 42 we
supply forks, pin sets, turnbuckles,
couplers and thread cover sleeves
hot galvanized as standard.
The threads are remachined to size
following galvanizing; repairs to zinc
coating are made in accordance with
the applicable standards. Spanner
flats on the tie-rods are pressed
following hot galvanizing to prevent
brittle fracture.
As an alternative, the systems can
also be supplied in a sand-blasted
and primed condition.

Adjustment options
The system length for all ASDO
systems is defined as the distance
from pin centre to pin centre. The
arrangement of opposing right / lefthand threads in the system enables
exact adjustment of the length on
installation. For smaller diameter
systems adjustment is easily carried
out by turning the tie-rod in the fork
connectors, however, larger diameter
systems, due to their high self-weight
should always be equipped with a
turnbuckle to enable adjustment
when installed.

Pretensioning
Certain designs or applications
require tie-rods to be tensioned after
installation to a desired load. Where
this is required a turnbuckle is imperative. With it a defined load can
be placed into the system by means
of the SPA hydraulic tensioning
device.
The device is mounted via thread
cover sleeves, special nuts or free
tie-rod threads. The SPA can be used
for all nominal sizes and has basic
models with a capacity of 20 to 200
tonnes.
Notification of planned pretensioning
must be provided in advance.

performance
3

ASDO 350-S system (carbon steel)

ASDO 520-S system (carbon steel)
ASDO 690-S system (carbon steel)

The ASDO-S tie-rod system (carbon steel)

LSys

A nominal size range from M12 to M160 and a load range from 31 kN to nearly 10.000 kN characterize the ASDO
tie-rod system. This diversity enables customtailored economical solutions in supporting structure design.

The tie-rod

The technology

Charpy impact value at least 27 J at -20 C for all systems

For the tie-rod, the qualities ASDO

520 -S and ASDO 690-S have been
newly developed. The higher
strengths compared to the conventional S 460 rod result in slimmer
diameters with the same loadbearing capacity.

The dimensions of the accessory

parts are provided in the tables on
Page 6/7 of this brochure. The
design tensile resistance for the
ASDO-S system are listed in
Table 1.
The possible standard single rod
lengths are shown in Table 2.

If a large cross-section with low

loads is decisive for stiffness or
ductility reasons, it is naturally
possible to use the conventional tierod quality ASDO 350 -S. In the
planning stage ASDO 520-S should
be assumed as the standard
system.

LSys

Loads
Nominal size

M 12

M 16

ASDO 350-S
ASDO 520-S
ASDO 690-S

31
31

58
79

Nominal size

M 72

M 76

ASDO 350-S
ASDO 520-S
ASDO 690-S

1,270 1,428 1,595 1,817 2,053 2,288 2,535 2,795 3,067 3,352 3,650 4,284 4,128 4,739 5,209
1,744 1,960 2,189 2,494 2,818 3,162 3,525
1,893 2,128 2,377 2,707 3,059 3,433 3,827 3,965 4,374 4,803 5,252 6,210 7,249 8,368 9,568

Table 1:
Design tensile resistance N R.d
as per Eurocode EC3 incl. partial
safety coefficient M

Nominal size

M 12 - M 36

ASDO 350-S
ASDO 520-S
ASDO 690-S

12,000
12,000

M 20 M 24

M 27

90
123

169
232

129
178

M 80 M 85

M 30 M 36 M 42 M 45 M 48
206
283

300
412

412
565

480
658

541
742

M 52 M 56

M 60 M 64 M 68

645 745
867 983 1,122
886 1,023 1,190 1,349 1,540
1,464 1,672

kN
kN
kN

M 90 M 95 M 100 M 105 M 110 M 115 M 120 M 130 M 140 M 150 M 160

kN
kN
kN

Notes on Table 1:
The values Fd of the influences may not exceed the values N R.d
To fully utilize the permissible loads for each system connection plates to the main structure must be made in grade S355 (EN 10025)

M 42 - M 60

M 64 - M 100

Tie-rod lengths

M 105 - M 160

16,000
16,000
12,000

mm
mm
mm

Table 2 : Maximum standard

lengths of single rods, longer
lengths on request

ASDO 690-E system (stainless steel)

The ASDO-E tie-rod system (stainless steel)

The ASDO-E stainless steel tie-rod system offers the perfect combination of corrosion resistance and aesthetics. In combination with
materials like steel, wood, textiles or glass, the hand-polished version of the fork connectors and thread cover sleeves gives the system
an exacting, individual architectural note. With a nominal size range from M12 to M100, there are virtually no longer any limits to supporting
structure design in stainless steel.

The material

The surface

The tie-rod and accessories are

manufactured of high-quality duplex
steel (material no. 1.4462) and offer
excellent resistance to corrosion in
structures subjected to heavy
exposure to chlorides and sulphur
oxides. It must be noted that stainless steel does not provide longterm freedom from maintenance
when used in coastal areas or
swimming baths. Therefore, the
overall structure should ensure easy
access to the tie-rod systems.
Depending on the environmental
influences, these must be treated
with suitable cleaners and any minor
surface corrosion removed from time
to time.

The technology

Forks and cover sleeves are supplied

hand-polished as standard. Tie-rods,
turnbuckles, couplers and circular
plates can be ordered untreated,
electro-brightened
or hand-polished
For the combination of
the ASDO -E stainless system
with carbon steel connection
plates or central circular plates, the
pin body is provided with a special
coating and washers. This provides
isolation between the two different
metals and prevents bimetallic
corrosion. The intention to use stainless steel with carbon steel should
be stated at the time of ordering.

The dimensions of the accessory

and connecting parts are identical
to those of the ASDO-S tie-rod system
and are contained in the Tables on
Page 6/7 of this brochure. The design
tensile resistance for the ASDO -E
system are listed in the following
tables.

Loads
Nominal size M 12
ASDO 690-E

47

Nominal size M 56

M 16
87
M 60

M 20 M 24

M 27

136

195

255

M 64 M68

M 72

M 30 M 36 M 42 M 45 M 48
311

453

621

724

817

M 52
886

kN

M 76 M 80 M 85 M 90 M 95 M 100

ASDO 690-E 1,023 1,190 1,349 1,540 1,744 1,960 2,189 2,494 2,818 3,162 3,525

kN

Table 3 : Design tensile resistance N R.d as per Eurocode EC3 incl. partial safety coefficient M
Notes on Table 3:
The values Fd of the influences may not exceed the values N R.d
To fully utilize the permissible loads for each system connection plates to the main structure must be made
in gradeS355 (EN10025)

The ASDO - E system can also be

combined with conventional
connection plates or circular plates
of S 355 as an option but bimetallic
corrosion considerations should be
made.

Tie-rod lengths
Table 4: Standard system, longer lengths and
nominal sizes on request

Nominal size

up to M 42

ASDO 690-E

6,000

mm

Thread cover sleeve GGK

for fork connector

Fork connector GK

B1 min.

Connection plate AB

L3
L

T1

L2 min.

Technical data of ASDO system components

Table 5: Dimensions for fork connector GK, pin set BG and thread cover sleeve GGK for fork connector
M 12

M 16

M 20

M 24

M 27

M 30

M 36

M 42

M 45

M 48

M 52

M 56

Rod weight

0.9

1.6

2.5

3.6

4.5

5.5

8.0

10.9

12.5

14.2

16.7

19.3

GK

L
B
W
T
D
E
L1
ME
N
+/-V
V total
Weight*

77
33
31
12
13
17
19
14
38
6
12
0.2

104
44
42
17
17
23
26
19
51
8
16
0.5

129
53
50
18
21
29
31
24
64
10
20
0.9

155
65
61
23
25
35
38
29
76
12
24
1.6

172
73
66
23
28
39
42
32
84
13.5
27
2.4

193
81
77
28
32
43
47
36
95
15
30
3.2

232
98
90
33
38
52
57
43
114
18
36
6

271
114
104
38
44
61
66
50
134
21
42
9

290
122
108
38
47
65
71
54
143
23
45
11

310
130
119
44
50
70
76
58
152
24
48
13

334
139
126
44
54
76
81
62
166
25
50
17

361
150
139
49
58
82
88
67
181
25
50
21

BG

D1
L4

12
30

16
40

20
47

24
57

27
63

30
73

36
85

42
97

45
102

48
111

52
120

56
129

E
L3

17
30

23
40

29
50

35
55

39
60

42
70

51
80

60
95

64
100

69
110

75
115

81
120

min. 45

Nominal size

GGK

Circular plate KS

T1

K3
K2
K1

Subject to design changes; *Weight for fork connector including pin set

Turnbuckle SP with
adjustment path +/-V

AB

Table 6: Dimensions for connection plate AB in steel quality S355 as per EN 10025; tolerance class A as per EN 10029

L5

Nominal size

M 12

M 16

M 20

M 24

M 27

M 30

M 36

M 42

M 45

M 48

M 52

M 56

T1
B1
D
L2

10
41
13
20

15
53
17
27

15
66
21
33

20
78
25
39

20
88
28
44

25
100
32
50

30
119
38
59

35
138
44
69

35
147
47
73

40
156
50
78

40
169
54
84

45
181
58
91

Subject to design changes

> M 100 with lateral hole
or spanner flats as an option

KS

Coupler MU

Table 7: Dimensions for circular plate KS

Nominal size

M 12

M 16

M 20

M 24

M 27

M 30

M 36

M 42

M 45

M 48

M 52

M 56

T1
K1
K2
K3
D
Weight

10
170
110
60
13
1.5

15
215
140
80
17
3.6

15
255
170
100
21
4.9

20
300
200
120
25
9

20
335
225
135
28
11

25
370
250
150
32
17

30
445
300
180
38
30

35
520
350
210
44
47

35
555
375
225
47
54

40
595
400
240
50
71

40
635
430
260
54
80

45
680
460
280
58
103

Subject to design changes

L6

Table 8: Dimensions for turnbuckle SP, coupler MU and thread cover sleeve GSM for turnbuckle or coupler
Nominal size

M 12

M 16

M 20

M 24

M 27

M 30

M 36

M 42

M 45

M 48

M 52

M 56

SP

C
L5
+/-V
V total
Weight

20
53
12
24
0.1

27
70
16
32
0.2

36
88
20
40
0.4

42
106
24
48
0.7

48
119
27
54
1.1

51
132
30
60
1.3

60
158
36
72
2.1

70
185
42
84
3.4

76
198
45
90
4.4

83
211
48
96
5.6

89
225
50
100
6.9

95
234
50
100
8.2

MU

C
L6
Weight

20
29
0.1

27
39
0.2

36
48
0.3

42
58
0.4

48
65
0.6

51
72
0.7

60
87
1.2

70
101
1.9

76
108
2.5

83
116
3.2

89
125
4.0

95
135
4.8

GSM

> M 100 with lateral hole

or spanner flats as an option

C
L7

20
30

27
40

36
50

42
55

48
60

52
70

63
80

70
95

80
100

83
110

90
115

95
120

Thread cover sleeve GSM

for turnbuckle and coupler

L7

Subject to design changes

D1

Pin set BG
(generally hot galvanized)

-V

+V

GK

L4
ME

L1

Minimum screw-in depth

M 60

M 64

M 68

M 72

M 76

M 80

M 85

M 90

M 95

M 100

M 105

M 110

M 115

M 120

M 130

M 140

M 150

M 160

22.2

25.3

28.5

32.0

35.6

39.5

44.5

49.9

55.6

61.7

68.0

74.6

81.5

88.8

104.2

120.8

138.7

157.8

kg/m

386
159
149
54
62
88
93
72
196
25
50
26

412
172
159
59
66
93
100
77
210
25
50
32

438
182
167
59
70
100
106
82
225
25
50
40

463
193
179
64
74
105
112
86
240
25
50
47

489
203
191
69
78
111
119
91
254
25
50
58

516
219
196
74
82
115
128
96
267
25
50
63

547
230
211
79
87
124
133
102
287
25
50
74

579
243
226
84
92
131
140
108
306
25
50
92

610
258
237
89
97
136
150
114
321
25
50
105

645
271
248
94
102
146
160
120
340
25
50
127

677
287
259
96
108
155
167
126
359
25
50
162

709
301
271
101
113
161
175
132
377
25
50
195

742
316
284
106
118
169
184
138
395
25
50
230

773
330
303
116
123
176
191
144
413
25
50
265

837
354
327
126
133
190
207
156
449
25
50
332

901
381
351
136
143
206
222
168
486
25
50
400

966
410
375
146
153
220
239
180
522
25
50
470

1,031
436
405
156
163
236
255
192
559
25
50
536

mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
kg

60
140

64
151

68
157

72
166

76
175

80
182

85
195

90
205

95
218

100
229

105
241

110
250

115
261

120
277

130
301

140
323

150
344

160
365

mm
mm

87
120

92
135

99
135

104
135

110
135

113
140

122
140

129
140

134
140

143
140

152
140

158
140

166
140

173
140

187
140

202
140

216
140

232
140

mm
mm

M 60

M 64

M 68

M 72

M 76

M 80

M 85

M 90

M 95

M 100

M 105

M 110

M 115

M 120

M 130

M 140

M 150

M 160

50
194
62
97

55
206
66
103

55
219
70
109

60
231
74
115

65
244
78
122

70
256
82
128

75
272
87
136

80
287
92
144

85
303
97
151

90
319
102
159

90
337
108
169

95
353
113
176

100
369
118
184

110
384
123
192

120
415
133
208

130
447
143
223

140
478
153
239

150
509
163
254

M 60

M 64

M 68

M 72

M 76

M 80

M 85

M 90

M 95

M 100

M 105

M 110

M 115

M 120

M 130

M 140

M 150

M 160

50
740
500
300
62
136

55
785
530
320
66
168

55
825
560
340
70
185

60
870
590
360
74
224

65
930
630
380
78
279

70
975
660
400
82
330

75
1,045
705
425
87
407

80
1,090
740
450
92
469

85
1,160
785
475
97
567

90
1,205
820
500
102
644

90
1,275
865
525
108
723

95
1,345
910
550
113
852

100
1,390
945
575
118
953

110
1,460
990
600
123
1,160

120
1,575
1,070
650
133
1,470

130
1,690
1,150
700
143
1,831

140
1,810
1,230
750
153
2,261

150
1,925
1,310
800
163
2,737

M 60

M 64

M 68

M 72

M 76

M 80

M 85

M 90

M 95

M 100

M 105

M 110

M 115

M 120

M 130

M 140

M 150

M 160

102
244
50
100
9.7

108
254
50
100
11

114
263
50
100
13

121
273
50
100
15

127
282
50
100
17

133
292
50
100
20

140
304
50
100
22

152
326
50
100
30

159
338
50
100
33

171
350
50
100
41

178
387
50
100
48

191
399
50
100
59

194
411
50
100
60

203
423
50
100
68

219
447
50
100
84

241
471
50
100
110

254
495
50
100
126

273
519
50
100
155

mm
mm
mm
mm
kg

102
144
5.9

108
154
7.1

114
164
8.4

121
173
10

127
183
12

133
192
13

140
204
15

152
226
21

159
238
24

171
250
30

178
287
39

191
299
48

194
311
50

203
323
57

219
347
71

241
371
94

254
395
108

273
419
134

mm
mm
kg

102
120

108
135

114
135

121
135

127
135

133
140

140
140

152
140

159
140

171
140

178
140

191
140

194
140

203
140

219
140

241
140

254
140

273
140

mm
mm

mm
mm
mm
mm

mm
mm
mm
mm
mm
kg

The ASDO-D compression-rod system

The ASDO-D compression-rod system offers a matching addition

to the ASDO tension tie-rod system. The fork connectors are
designed so that they transmit both tensile and compressive forces.
Tensile and compression elements resulting from the supporting
structure planning can therefore be executed in a uniform design.

Systems
Compression-rod system
ASDO -DS (carbon steel)
ASDO -DE (stainless steel)

The technology

The compression rod features a

pipe design (pipe with welded-on
threaded ends) or a solid rod solution (round rod with screwed-on
threaded ends). Entire compressionrod systems or fork connectors as
separate components can be
supplied.

LSys

When planning the compression

rod in stainless-steel design, please
consult us beforehand.

Loads

Nominal size M 12
100
> 100 150
> 150 200
> 200 250

13
12
11
11

Nominal size M 72

100
> 100 150
> 150 200
> 200 250

715
628
604
594

M 16
28
24
23
23

M 20 M 24
41
36
35
34

62
54
52
51

M 27
84
74
71
69

M 30 M 36 M 42 M 45 M 48
104
91
87
86

157
137
132
129

220
193
185
182

261
229
220
216

284
249
239
235

M 52 M 56

M 60 M 64 M 68

346
303
292
286

474
416
400
394

402
353
339
333

541
475
457
449

624
548
527
518

M 76

M 80 M 85

M 90

M 95 M 100 M105 M 110 M 115 M 120 M 130 M 140 M 150 M 160

811
713
686
675

915
805
774
761

1,195
1,053
1,012
996

1,354
1,193
1,147
1,129

Table 9: Design compression

resistance N R.d as per Eurocode
EC3 incl. partial safety
coefficient M

The dimensions for fork connectors

and related connection plates are
shown in the tables on Page 6/7.
The design compression resistance
for the ASDO-D system are listed
in Table 9 and result from the calculation of the compression rods in
the thread cross-section.
For the compression rods
themselves, which have a maximum
tensile strength equal to grade S355
steel, design strengths according
to EC3 must be calculated in
individual cases. The resulting value
for the design compression
resistance must not drop below the
related value in Table 9, or must be
applied as a major limit value for
the entire system.

Design for corrosion protection can

be found in the section Corrosion
protection on Page 3.

Compression element welded to pipe

Compression element of pipe or solid rod

The design

1,050
924
889
874

1,518
1,339 1,441 1,601 1,770 1,947 2,327 2,739 3,187
1,287 1,385 1,539 1,701 1,872 2,237 2,633 3,064 3,525
1,267 1,363 1,514 1,674 1,842 2,202 2,592 3,017 3,472

kN
kN
kN
kN

kN
kN
kN
kN

Notes on Table 9:
The values Fd of the influences may not exceed the values N R.d
To fully utilize the permissible loads for each system connection plates to the main structure must be madein gradeS 355 (EN10025)

Design information
Connection plate

Delivery and assembly

The shape of the connection plate

is dependent on the load transfer
to the supporting structure.
The illustrations at the right show a
few of these different connection
solutions. The specifications for the
design development are contained
in Table 6 on Page 6/7 and must
be applied to all ASDO systems.
Connection plates must generally
be produced in steel grade S355
according to EN 10025.
For connection plates in stainless
steel, the 0.2% proof stress must be
equivalent or greater than grade
S355. Connection plates must be
purchased in the tolerance class A
according to EN 10029.

Depending on the transport length,

the ASDO tie-rod system is generally
delivered preassembled. The fork
connectors, turnbuckles and
couplers are screwed onto the tierod, and the minimum screw-in depth
must be checked at the building site
by the customer. When lifting in the
tie-rod system, sufficient support
must be provided over the system
length in order to prevent excessive
bending.

Pin holes in the connection plates must be produced mechanically.

The required system length is

adjusted by means of open-end
spanners by turning the tie-rod or
the turnbuckle.

During installation the pins must be

fitted free of secondary bending,
driving in with a hammer is not
permitted as this could damage the
system.

Installation tolerances
When installing the system, it must
be ensured that the deflection does
not exceed 0,5 from its plane. This
prevents impermissible bending in
the fork connectors and connection
plates

0,5

The installation of an ASDO tie-rod

system with connection ends twisted
in opposite directions requires
particular precision to ensure the
necessary alignment is maintained
during manufacture and erection.
Therefore, it is recommended that a
design of the connection ends with
the same orientation always be
provided.

Locking thread cover sleeves are

locked at the fork connector,
turnbuckle or coupler and hide any
exposed thread. A common C
spanner can be used for this purpose
and will be included with the order
on request.
With corrosion-protected parts,
surface damage may result during
transport and handling. We cannot
assume any guarantee for such
damage or the subsequent costs.
The damaged areas must be
correctly repaired by the customer
to ensure full corrosion protection.

 Query
Order
Shipping is charged extra, all prices are ex works Dortmund;
the General Terms and Conditions of ANKER-SCHROEDER.DE ASDO GmbH

Tie-rod System CE ETA-04/0038

Internet: www.asdo.de

e-mail: [email protected]

Fax: +49 231/ 5 17 01-56

Forms can be downloaded directly at www.asdo.de

Customer address:

Delivery address:

Reference:

Company :

Profect:

Street 1 :

Company:

Street 2 :

Street:

Postal Code / City :

Postal Code / City :

Tel.:

Tel.:

Fax :

Fax:

Attn. :

Name:

Delivery date :

Systems

Max. lengths of single rods Lmax (longer on request)

ASDO 350-S ...............

ASDO 520-S ...............
ASDO 690-S ...............
ASDO 690-E ...............
ASDO- DS ..................
ASDO- DE ..................

Tie-rod system, steel ...............................................

Tie-rod system, steel ...............................................
Tie-rod system, steel ...............................................
Tie-rod system, stainless steel .................................
Compression-rod system, steel ...............................
Compression-rod system, stainless steel ..................

M 12 - M 36 Lmax =12,000 mm; M 42-M160 : Lmax =16,000 mm

M 12 - M 36 Lmax =12,000 mm; M 42-M100 : Lmax =16,000 mm
M 64 - M 160 Lmax =12,000 mm
M 12 - M 42 Lmax = 6,000 mm; > M 42 on request
In case of queries or orders for these systems, please consult
us beforehand.

With thread cover sleeve

Without thread cover sleeve

L1

L2

1 Set

tie-rod in single or multi-piece design /2 x fork connectors R+L thread including pin set/
accessories (optional) such as thread cover sleeve, turnbuckle, coupler or circular plate

consists of

Hot
galvanizing

according to DIN EN ISO 1461: tie-rod threads are undercut and recut to size following galvanizing, pin sets are generally hot
galvanized, fork connector, turnbuckle and coupler through nominal size M42 in hot galvanized design as standard

System length
Thread cover
Hot
LSys
sleeves
galvanizing
Yes
No
Yes
No
mm

Set
Qty.

Nom.
size
M

520-S

25

M 65

35.000

40

M 42

7.000

ASDO
Item system

Remarks:
e.g. individual lengths L1, L2 ... Ln
e.g. circular plate with angle specification etc.

1
2
3
4
5
6
7

Examples

City:

10

Ln

L Sys

X
X

Date:

L1 = 3,000mm; L2 =16,000 mm, with turnbuckle + coupler,

pretensioning option Fv = 20 t, compl. hot galvanized
with circular plate, = 57, tie-rods untreated,
circular plate hand-polished

Signature :

Special solutions with ASDO tension elements

In addition to the ASDO tie-rod system with its general building supervision approval, ANKER-SCHROEDER also offers the development
and delivery of special design solutions. Such solutions should be chosen when it is important to realize tension elements that have a
simple shape but are required to fulfil demanding technical requirements, e.g.:

1. Bow String trusses with a curved design

Minimum number of gusset plate connections
Simple design of deflection points
Slim design over the entire length
Low preservation costs and effort

Roof structure

hot-formed tie-rod
for bowstring truss
Compression support
Deflection point

2. Connection via standard nut or spherical nut

Simple, economical design
Additional joint effect when spherical nut used
System adjustable via thread ends
Simplest option for system pretensioning

3. Connection via eye anchor

Abutment

Standard
or round nut

Slim design with use of parallel tie-rod groups by means of

central pin
Low maintenance costs and effort due to minimal number of threads
Load transmission at butting points free of bending moments by
means of hinge joints - ideal for large spans
Fast, simple assembly

Abutment

Tension
anchor

Swivelling range
Spherical nut

Forged
eye anchor

Central pin

4. Upset ends
Additional safety in thread due to larger cross-sectional ratio of
thread core to shank
Stress concentration through thread is considerably reduced
Ideal for dynamic load requirements
Complete covering of outer and inner thread possible

ACore AShank

Upset end

Turnbuckle

For the above special designs, approval in idividual cases is generally not necessary. Proof of all components and the choice of the steel
types is carried out according to the guidelines for dimensioning and design of steel structures (DIN 18800). Possible use should be
clarified with the respectively responsible testing institute in advance in each case.
Well be happy to support you in the process . . . Just ask us !
11

great

ness
lies in the

details

Cargo-Lifter, Brand, Transverse Bracing

Airside-Center, Zrich
Compression element
Photo:
Tuchschmid AG,
Frauenfeld, Switzerland

Trade Fair, Erfurt, Suspension Stays

Trade Fair, Munich, Bowstring truss, bottom chord

ANKER-SCHROEDER.DE ASDO GmbH Hannversche Str. 48 D-44143 Dortmund

Fax: +49 231 517 01-56 e-mail: [email protected] Internet: www.asdo.de
Fon: +49 231 517 01-28 / Sales
Fon: +49 231 517 01-38 / Engineering

Despite all due diligence, we can assume no liability for the completeness and correctness of the information contained in this brochure. This information does not represent a contractual offer. In line with Anker Schroeders policy of continuous improvement all details are subject to change without notice

The proof of

Edition I 5/2004

M 12 M 160

Bridge over Cracauer Wehr,

Pylon Stays