Curriculum

For
Certificate in Textile Wet Processing
(1 year)
Code: VI87S015
(2013)

0|P ag e

Table of Contents
Scheme of Studies ................................................................................................................................... 3
Introduction ............................................................................................................................................ 4
Name of course ....................................................................................................................................... 4
Overall objective of course ...................................................................................................................... 4
Competencies gained after completion of course .................................................................................... 4
Job opportunities available immediately and in the future ...................................................................... 4
Sequence of the modules ........................................................................................................................ 5
Timeframe of assessment (recommendation) .......................................................................................... 5
Summary ................................................................................................................................................. 6
Curriculum Contents................................................................................................................................ 9
Module: 1 Title Selection of Grey Fabric ......................................................... 9
Module# 2 Title Grey Fabric Inspection ........................................................... 11
Module: 3 Title Singeing .. ................................................................................... 12
Module: 4 Title.. Desizing . ........................................................ 16
Module: 5 Title Scouring ............................................................ 18
Module: 6 Title Bleaching...................................................................... 20
Module: 7 Title Mercerizing . ..................................................................... 22
Module:8 Title Dyeing ............................................................................ 25
Module:9 Title Printing ..................................................................... 27
Module:10 Title. Finishing .......................................................................... 29
Module: 11 Title Carry out Final Inspection ................................................... 32
Module: 12 Title Adopt Safety measures ....................................................... 34
Module: 13 Title Communicate with others ........................................ 35
Module:14 Title Develop professionalism ......................................... 36
Assessment Template ............................................................................................................................ 38
1|P ag e

Module # 1 ............................................................................................................................................ 38
Module # 2 ............................................................................................................................................ 39
Module # 3 ............................................................................................................................................ 40
Module # 4 ............................................................................................................................................ 43
Module # 5 ............................................................................................................................................ 45
Module # 6 ............................................................................................................................................ 46
Module # 7 ............................................................................................................................................ 48
Module # 8 ............................................................................................................................................ 49
Module # 9 ............................................................................................................................................ 52
Module # 10 .......................................................................................................................................... 53
Module # 11 .......................................................................................................................................... 55
Module # 12 .......................................................................................................................................... 56
Module # 13 .......................................................................................................................................... 57
Module # 14 .......................................................................................................................................... 58
Tools & Equipment Template ................................................................................................................ 59
Tools and Equipment ............................................................................................................................. 59
Consumable Supplies............................................................................................................................. 60
References ............................................................................................................................................ 61
Contributions for Development of This Curriculum ................................................................................ 62

2|P ag e

Scheme of Studies
Textile Wet Processing
Sr #

Modules

Selection of Grey
Fabric
Grey Fabric
Inspection
Singeing
Desizing
Scouring
Bleaching
Mercerizing
Dyeing
Printing
Finishing
Final Inspection
Adopt Safety
Measures
Communication
Skills
Develop
Professionalism

2
3
4
5
6
7
8
9
10
11
12
13
14

3|P ag e

Theory
Hours
14

Practical
Hours
46

Total Hours
52

14

46

60

22
22
22
22
22
46
32
32
22
14

92
92
92
92
92
172
140
140
92
46

114
114
114
114
114
210
180
180
114
60

14

46

60

22

92

114

320

1280

1600

Introduction
The process in which the grey textile material is treated with dyes and chemicals in such a way to
enhance its aesthetic, comfort and value.

Name of course
Textile Wet Processing

Overall objective of course

a. Getting basic knowledge of Textile Wet Processing
b. Acquiring proficiencies in basic textile wet processing techniques and methods
c. Becoming able to get a skilled job in textile processing units.

Competencies gained after completion of course

1. Become aware of the basic communication and presentation skills along with becoming
conscious about personal, co-workers and workplace safety
2. Get acquaintance with the workplace safety measures
3. Development of professionalism in the trainee
4. Trainee will enable to select the desired grey fabric
5. Ability to desize, Scour, Bleach, Mercerize, Dye, Print or Finish the fabric
6. Ability to perform tasks according to SOPs (Standard Operating Procedures)

Job opportunities available immediately and in the future

1.
2.
3.
4.
5.

Textile processing Mills

Warehouses
Textile Chemicals marketing
Textile Labs
Merchandising and buying houses

Trainee entry level

Matric
Clearance certificate of Colour Blindness Test

Minimum qualification of trainer

B.Sc. Textile Engineer (Textile Chemistry) or Equivalent

Medium of Instruction i.e. language of instruction

Urdu

4|P ag e

Sequence of the modules

Module # 1
Module # 2
Module # 3
Module # 4
Module # 5
Module # 6

Timeframe of assessment (recommendation)

Duration:
Total Hour:

1 Year
1600

Theory Hours:

320

Practical Hours:

1280

5|P ag e

Summary
Module Title

Module 1: Selection of

Grey Fabric

Module 2: Grey Fabric

Inspection

Module 3: Singeing

Module 4: Desizing

Module 5: Scouring

6|P ag e

Learning Units

LU1:Collection of sample
LU2:Selection of Sample
LU3:Deliver Sample to Lab
LU4:Placing of Order to
Supplier
LU5:Receiving of material
LU1: Carry out surface
inspection
LU2: Carry out grading
LU3: Dispatch fabric to lab
LU4: Carry out quantitative
analysis
LU1: Introduction to Singeing
LU2: Introduction to Singeing
Machine
LU3:Load fabric to Machine
LU4: Adjust flame intensity
LU5: Adjust speed of fabric
LU6: Adjust distance between
flame & fabric
LU7: Adjust angle of flame
LU8: Singed Fabric Inspection
LU1: Introduction to Desizing
LU2: Introduction to Desizing
Machine
Prepare desizing recipe
LU3: Adjust parameters of
Machine
LU4: Set desizing rotation time
of batch
LU5: Carry out washing off/
Neutralization
LU6: Desized Fabric Inspection
LU1: Introduction to Scouring
LU2: Introduction to Scouring
Machine
LU3:Prepare Scouring recipe
LU4: Adjust parameters of
Machine
LU5: Carry out washing off
LU6: Scoured Fabric Inspection
LU1: Introduction to Bleaching
LU2: Introduction to Bleaching
LU3:Prepare bleaching recipe

Theory
Days/hour
s

Workplace
days/hours

Timeframe of
Modules

Completing
Module #1
14 hours

46 hours

Completing
Module #1 first
14 hours

46 hours

22 hours

92 hours

22 hours

92 hours

22 hours

92 hours

Completing
Module #1,
Module #2

Completing
module #1,
Module #2
Module #3

Completing
module #1,
Module #2
Module #3
Module #4

Completing

Module 6: Bleaching

Module 7: Mercerizing

Module 8: Dyeing

LU4: Adjust parameters of

Machine
LU5: Setting steam parameters
LU6: Carry out washing off
LU7: Bleached fabric inspection
LU1: Introduction to
Mercerizing
LU2: Introduction to
mercerizing Machine
LU3:Prepare mercerizing recipe
LU4: Adjust parameters of
Machine
LU5: Carry out washing off and
neutralization of fabric
LU6: Carry out drying of fabric
LU7: Mercerized fabric
inspection
LU1: Introduction to Dyes and
Dyeing
LU2: Introduction to dyeing
Machines
LU3:Prepare dyeing recipe
LU4: Adjust parameters of
Machine
LU4: Carry out padding off
LU4: Dyeing
LU5: Carry out washing off
LU7: Carry out drying of fabric
LU8: Dyed Fabric inspection

Module 9: Printing

LU1: Introduction to Engraving

and Printing
LU2: Introduction to Printing
Machine
LU3: Prepare printing recipe
LU2: Adjust Machine
parameters
LU3: Printed Fabric inspection

Module 10: Finishing

LU1: Introduction to Finishing

LU2: Introduction to Finishing
Machines
LU3:Prepare Finishing recipe
LU4: Carry out padding off
LU5: Carry out finishing on
stenter
LU6: Carry out sanforizing

7|P ag e

22 hours

22 hours

46 hours

32 hours

32 hours

92 hours

92 hours

172 hours

140 hours

140 hours

module #1,
Module #2
Module #3
Module #4
Module #5

Completing
module #1,
Module #2
Module #3
Module #4
Module #5
Module #6

Completing
module #1,
Module #2
Module #3
Module #4
Module #5
Module #6

Completing
module #1,
Module #2
Module #3
Module #4
Module #5
Module #6

Completing
module #1,
Module #2
Module #3
Module #4
Module #5
Module #6

LU7: Carry out calendering

LU8: Finished Fabric Inspection

Module 11: Final

Inspection

Module 12:

LU1: Carry out surface

inspection
LU2: Carry out color inspection
LU3: Marking
LU4: Grading
LU5: Packing as per grading
LU6: Dispatch end product
LU7: Surface inspection and
mending
LU1: Apply Personal Safety
LU2: Apply workplace safety
LU3: Apply safety for tools and
Equipment

22 hours

14 hours

92 hours

46 hours

Adopt Safety
measures

Module 13:

Communicate Skills

LU1: Communicate with coworkers

LU2: Communicate with
customer/ other departments
LU3: Communicate with
supervisor
LU4:

14 hours

46 hours

Completing
module #1,
Module #2
Module #3
Module #4
Module #5
Module #6

Completing
module #1,
Module #2
Module #3
Module #4
Module #5
Module #6

Completing
module #1,
Module #2
Module #3
Module #4
Module #5
Module #6

LU1: Participation in internship

Module 14: Develop

professionalism

8|P ag e

22 hours

92 hours

Completing
module #1,
Module #2
Module #3
Module #4
Module #5
Module #6

Curriculum Contents
Module: 1 Title Selection of Grey Fabric
Objective of the ModuleMaking Trainee able to select the required fabric quality.
Duration60 hours.. Theory Hours14. Practical Hours.46.
Learning Learning
Unit
Outcome

Learning
Element

1.
Collection
of sample

Knowledge
of:
Different
types of yarns,
Different
kinds of
fabrics,
Required
fabric
characteristics

Trainee will
get
acquaintance
with the
types of
yarns and
fabrics and
the blend
ratios

Theory Practical Materials Required

Hours Hours
4 hours

8 hours

Different Fabric
samples

Learning
Place
Class/Workplace

Ability to:
Collect the
sample from
different
sources,
2.
Selection
of Sample

3. Deliver
Sample to
Lab

9|P ag e

Trainee will
get
acquaintance
with the
procedure of
selecting the
required
fabric from
different
types of
fabrics.

Knowledge
of:
Required
fabric type
and properties,
Source of
fabric,
Fabric quality
Ability to:
Judge the
desired fabric
type,
Select the
required fabric
Trainee will Knowledge
get
of:
acquaintance Standard
with the
operating
standard
procedures to
operating
follow,
procedures
Basic
for
requirements
delivering
of the fabric

4 hours

8 hours

4 hours

8 hours

GSM Cutter,
Ends, picks/inch
Class/workplace
counter, Magnifying
Glass,needle,measuring
tape

Delivering
trolley/Container

Workplace

fabric to
Lab.

4. Placing
of Order
to
Supplier

5.
Receiving
of
material

10 | P a g e

for delivering
it to lab for
detailed
analysis
Ability to:
Select the
desired fabric
and deliver it
to the Lab.
Trainee will Knowledge
get
of:
acquaintance The procedure 4 hours
with the
to finalize the
basic needs
supplier,
for placing
The standard
order to the
operating
supplier.
procedure for
placing of
order to the
supplier for
bulk purchase
Ability to:
Finalize the
required
property fabric
and placing
order to the
supplier.
Trainee will Knowledge
get
of:
4 hours
acquaintance SOPs and
with the
formalities for
procedure of receiving of
receiving the fabric from
material
the supplier.
from the
Ability to:
supplier
Receive the
desired quality
material from
the supplier
and assuring
the required
characteristics.

Class/workplace
8 hours

Workplace
8 hours

Module# 2 Title Grey Fabric Inspection .

Objective of the Module:Making Trainee able to inspect the quality of the fabric and its fault
Duration60 hours.. Theory Hours14. Practical Hours46
Learning
Unit

Learning
Outcome

1. Carry out
surface
inspection

Trainee will
get
acquaintance
with the
standard
operating
procedures
to follow for
carrying out
surface
inspection of
fabric.

2. Carry out
quantitative
analysis

3. Despatch
fabric to lab

11 | P a g e

Learning
Element

Knowledge
of:
Carrying out
surface
inspection,
Basic surface
tests available
for checking
the quality of
fabric.
Ability to:
Perform the
surface
inspection
according to
the SOPs.
Trainee will Knowledge
get
of:
acquaintance Basic
with the
quantitative
standard
analysis tests
operating
and methods
procedures
for detailed
to follow for analysis of the
carrying out given fabric.
quantitative Ability to:
analysis of
carrying out
the fabric
quantitative
sample.
analysis of the
fabric sample
according to
the SOPs.
Trainee will Knowledge
get
of:
acquaintance Selecting
with the
Desired fabric
standard
sample and
operating
delivering it to
procedures
the Lab.
to follow for Ability to:
dispatching
Select the
fabric to
desired fabric
Lab.
sample for

Theory
Hours

3 hours

Practical
Hours

12 hours

3hours

12 hours

3 hours

12 hours

Materials
Required
GSM
Cutter,
Ends,
picks/inch
counter,
Magnifying
Glass,
needle

GSM
Cutter,
Ends,
picks/inch
counter,
Magnifying
Glass,
chemicals

Fabric
trolley

Learning
Place
Class/workplace

Class/workplace

workplace

4. Carry out
grading

detailed
analysis.
Trainee will Knowledge
get
of:
acquaintance Basic
with the
knowledge of
standard
the fabrics
operating
grading,
procedures
Ability to:
to follow for Grade the
carrying out different types
the grading
of fabrics
of different
following the
types of
SOPs for
Fabrics.
fabric grading.

3 hours

12 hours

Fabric
samples of
different
qualities

Class/workplace

Module: 3 Title Singeing ..

Objective of the ModuleEnabling Trainee to perform Singeing..
Duration114 hours.. Theory Hours22. Practical Hours..92.

Learning
Unit

Learning
Outcome

1.Introduction Trainee will

to Singeing
get
introduction
of Singeing
its types,
faults and
remedies

2.Introduction Trainee will

to Singeing
get
Machine
introduction
of Singeing
Machine, its
components

12 | P a g e

Learning
Element
Knowledge
of:
Singeing
process, its
types, faults
and
remedies
Ability to:
Perform
singeing
process
efficiently
Check
singeing
faults and
remedies
Knowledge
of:
Machine
parts and
components,
Machine
faults
Ability to:
Handle
Machine in

Theory
Hours
12 hours

2 hours

Practical Materials
Hours
Required

Learning
Place

Projector

Class/Workplace

Singeing
Machine

Workplace

2 hours

10 hours

case of
emergency,
3. Load fabric
to Machine

4. Adjust
flame
intensity

13 | P a g e

Trainee will
get
acquaintance
with the
SOPs for
loading
fabric to
Machine.

Knowledge
of:
Machine
working,
Fabric
quality,
Warm up
time of
Machine,
Standard
operating
procedures
for loading
of fabric to
Machine
Ability to:
Handle
Machine in
case of
emergency,
Select the
required lot
of fabric for
loading in
Machine
Trainee will Knowledge
get
of:
acquaintance Machine
with the
working,
types of
Fabric
flames and
quality,
adjusting
Warm up
flame height time of
with respect Machine,
to the fabric Standard
quality
operating
procedures
for loading
of fabric to
Machine
Flame
intensity
setting with
respect to
the quality
of fabric
Ability to:
Handle

2 hours

8 hours

2 hours

12 hours

Fabric Lots,
Singeing
Machine

Workplace

Thermometer, workplace
Safety
Goggles,
Face mask

5. Adjust
speed of
fabric

6. Adjust
distance
between
flame &
fabric

14 | P a g e

Machine in
case of
emergency,
Select the
required
fabric lot
and adjust
the flame
intensity
keeping in
mind the
weave
Trainee will Knowledge
get
of:
acquaintance MACHINE
with the
parameters,
Machine
SOPs for
parameters
operating
and setting
the
of fabric
Machine,
speed with
Fabric
respect to
Quality
the flame
Ability to:
intensity and Control the
fabric
speed of the
quality
fabric,
Adjusting of
flame height
Trainee will Knowledge
get
of:
acquaintance Machine
with the
parameters,
types of
SOPs for
flames and
operating
adjusting
the
flame height Machine,
with respect Fabric
to the fabric Quality
quality and
Height of
adjustment
flame,
of distance
Flame
between
intensity
fabric and
Ability to:
flame.
Control the
speed of the
fabric,
Adjustment
of flame
height,
Adjust the
distance

2 hours

8 hours

Safety
Gloves,
Stopwatch,
Tachometer,
Tension
meter

Safety
Goggles
2 hours

10 hours

Workplace

Class/workplace

7. Adjust
angle of
flame

8. Start
singeing
Machine

9. Singed
fabric
inspection

15 | P a g e

between the
fabric and
flame
Trainee will Knowledge
get
of:
acquaintance Machine
with the
parameters,
types of
SOPs for
flames and
operating
adjustment
the
of flame
Machine,
angle with
Fabric
respect to
Quality
the fabric
Ability to:
quality
Control the
speed of the
fabric,
Adjusting of
flame height
Trainee will Knowledge
get
of:
acquaintance Machine
with the
parameters,
SOPs to
SOPs for
follow
operating
before
the
starting the
Machine,
Machine.
Fabric
Quality
Ability to:
Operate the
Machine
following
all SOPs
Knowledge
of:
Singeing,
singeing
faults their
remedies,
Quality of
the fabric
Ability to:
Inspect the
fabric
according to
the SOPs

Angle
measurer
2 hours

8 hours

2 hours

8 hours

Workplace

Workplace

4 hours

10 hours

Microscope.
Tape ,
Inspection
Frame

Class/Workplace

Module: 4 Title.. Desizing .

Objective of the Module Enabling Trainee to perform Desizing..
Duration114 hours.. Theory Hours22. Practical Hours92

Learning
Unit

Learning
Outcome

1.Introducti
on to
Desizing

Trainee will
get
introduction
of Desizing
its types,
faults and
remedies

2.Introducti
on to
Desizing
Machine

3. Prepare
desizing
recipe

4. Adjust
parameters
of Machine

5. Set
desizing
rotation
time of
batch
16 | P a g e

Learning Element

Knowledge of:
Desizing process, its
types, faults and
remedies
Ability to:
Perform Desizing
process efficiently
Check Desizing
faults and remedies
Trainee will Knowledge of:
get
Machine parts and
introduction components,
of Desizing Machine faults
Machine,
Ability to:
its
Handle Machine in
components case of emergency,
Trainee will
get
acquaintanc
e with the
types of
sizes and
the desizing
recipes
specific to
each sized
fabric.
Trainee will
get
acquaintanc
e with the
types of
sizes and
the desizing
machine
parameters
Trainee will
get
acquaintanc
e with the
types of

Knowledge of:
Sizing material,
Desizing types,
Desizing chemicals,
Temperature
requirement
Ability to:
Use proper desizing
technique with
respect to the type of
size on the fabric.
Knowledge of:
Machine parameters,
SOPs for operating
the Machine,
Fabric Quality
Ability to:
Operate the Machine
following all SOPs
Knowledge of:
Rotating roller time,
SOPs for operating
the Machine,
Fabric Quality

Theor
y
Hours
14
hours

Practic
al
Hours

Learning
Place

Projector

Class/Workpla
ce

Machine,
Fabric Lot

Workplace

Desizing
Chemicals,
Thermomet
er, pH strips

Workplace

4 hours

4 hours

12 hours

4 hours

12 hours

4 hours

Materials
Required

12 hours

Desizing
Machine,
Fabric Lot

Rotating
Batcher
4 hours

12 hours

workplace

Workplace

6. Carry out
washing off/
Neutralizati
on

7. Desized
fabric
inspection

17 | P a g e

sizes and
time
required for
desizing.
Trainee will
get
acquaintanc
e with the
washing
process and
the
neutralizati
on process.

Ability to:
Operate the Machine
following all SOPs
Knowledge of:
Machine parameters,
SOPs for operating
the Machine,
Fabric Quality
,Neutralization/Wash
ing process
Ability to:
Operate the Machine
following all SOPs,
Use the exact
quantity of chemicals
for
neutralization/Washi
ng
Knowledge of:
Desizing, its kinds,
desizing faults their
remedies,
Fabric Quality
Ability to:
Inspect the fabric
according to the
SOPs

4 hours

4 hours

12 hours

12 hours

Chemicals
for
neutralizatio
n

Class/workpla
ce

Tegwa
Scale, KI
Solution, Ph
strips,
Inspection
frame

Class/Workpla
ce

Module: 5 Title Scouring

Objective of the Module Enabling Trainee to perform Scouring ..
Duration114 hours.. Theory Hours22. Practical Hours92.

Learning Unit

Learning
Outcome

Learning
Element

1.Introduction to
Scouring

Trainee will
get
introduction
of Scouring
its types,
faults and
remedies

Knowledge
of:
16
Scouring
process, its
hours
types, faults
and remedies
Ability to:
Perform
Scouring
process
efficiently
Check
Scouring
faults and
remedies
Knowledge
of:
Machine parts 3 hours
and
components,
Machine
faults
Ability to:
Handle
Machine in
case of
emergency,

2.Introduction to
Scouring
Machine

Trainee will
get
introduction
of Scouring
Machine, its
components

3. Prepare
Scouring recipe

Trainee will
get
acquaintance
with the
scouring
process and
the recipe
required.

18 | P a g e

Knowledge
of:
Machine
parameters,
SOPs for
operating the
Machine,
Quality of the
fabric,
Scouring
recipe
Ability to:
Operate the
Machine
following all

Theory Practical Materials

Hours Hours
Required

3 hours

Learning
Place

Projector

Class/Workplace

Machine

Workplace

Chemicals
for
scouring,
trolley

Workplace

3 hours

16 hours

16 hours

SOPs,
Accurate
quantity of
each chemical
4. Adjust
Trainee will Knowledge
parameters of
get
of:
3 hours
Machine
acquaintance Machine
with all the
parameters,
parameters
SOPs for
of the
operating the
scouring
Machine,
Machine.
Fabric
Quality
Ability to:
Operate the
Machine
following all
SOPs
5. Carry out
Trainee will Knowledge
washing
get
of:
3 hours
off/Neutralization acquaintance Machine
with the
parameters,
washing of
SOPs for
the scoured
operating the
fabric.
Machine,
Fabric
Quality,
Washing
methods,
Neutralization
Ability to:
Operate the
Machine
following all
SOPs
6. Scoured fabric
inspection

19 | P a g e

Trainee will
get
acquaintance
with the
chemical and
fabric
inspection
after scouring
before
dispatching it
to the
bleaching
department.

Knowledge of:
Fabric Quality,
Fabric
inspection
Ability to:
Assess the
chemical
residuals and
the fabric
strength.

3 hours

16 hours

16 hours

16 hours

Safety
Gloves

workplace

Washing
chemicals,
pH strips

Workplace

Stitching
Class/Workplace
Machine,
Measuring
Tape,
Absorbency
Test

Module: 6 Title Bleaching.

Objective of the Module Enabling Trainee to perform bleaching
Duration114 hours.. Theory Hours.22.. Practical Hours92

Learning
Unit

Learning
Outcome

1.Introduction Trainee will

to Bleaching
get
introduction
of Bleaching
its types,
faults and
remedies

2.Introduction Trainee will

to Bleaching
get
Machine
introduction
of Bleaching
Machine, its
components

3. Prepare
bleaching
recipe

20 | P a g e

Trainee will
get
acquaintance
with
different
bleaching
methods and
the
bleaching
recipes
specific to
each fabric.

Learning
Element
Knowledge
of:
Bleaching
process, its
types, faults
and remedies
Ability to:
Perform
Bleaching
process
efficiently
Check
Bleaching
faults and
remedies
Knowledge
of:
Machine parts
and
components,
Machine
faults
Ability to:
Handle
Machine in
case of
emergency,
Knowledge
of:
MACHINE
parameters,
SOPs for
operating the
Machine,
Quality of the
fabric,
Bleaching
recipe
Ability to:
Operate the
Machine
following all

Theory Practical Materials

Hours Hours
Required
14
hours

Learning
Place

Projector

Class/Workplace

Machine

Workplace

4 hours

4 hours

12 hours

4 hours

12 hours

Bleaching
Workplace
Chemicals,
Mixer,
Thermometer,
Safety Gloves

4. Adjust
parameters of
Machine

5. Set steamer
parameters

6. Carry out
washing off

7. Bleached
fabric
21 | P a g e

SOPs,
Accurate
quantity of
each chemical
Trainee will Knowledge
get
of:
acquaintance MACHINE
with all the
parameters,
parameters
SOPs for
of the
operating the
beaching
Machine,
range.
Quality of the
fabric
Ability to:
Operate the
Machine
following all
SOPs
Trainee will Knowledge
get
of:
acquaintance MACHINE
with all the
parameters,
parameters
SOPs for
of the
operating the
steamer
Machine,
Machine.
Quality of the
fabric
Ability to:
Operate the
Machine
following all
SOPs
Trainee will Knowledge
get
of:
acquaintance Machine
with the
parameters,
washing
SOPs for
methods and operating the
SOPs for
Machine,
washing of
Quality of the
the bleached fabric,
fabric.
Washing
methods
Ability to:
Operate the
Machine
following all
SOPs
Trainee will Knowledge
get
of:

workplace
4 hours

12 hours

4 hours

12 hours

Gloves,
Thermometer

4 hours

12 hours

Washing
chemicals

Cutter,

Workplace

Workplace

inspection

acquaintance
with the
Chemical
and fabric
checkup of
the fabric.

Quality of the
fabric,
Chemicals
neutralization,
Fabric
checkup
Ability to:
Check the
chemical
residuals and
the fabric
strength.

4 hours

12 hours

Chemicals,
Stitching
machine,
strength
tester,
Absorbency
test,
Inspection
frame

Module: 7 Title Mercerizing .

Objective of the Module Enabling Trainee to perform mercerizing
Duration114 hours. Theory Hours22. Practical Hours92

Learning
Unit

Learning
Outcome

1.Introduction Trainee will

to
get
Mercerizing
introduction
of
Mercerizing
its types,
faults and
remedies

2.Introduction
to
Mercerizing
Machine

22 | P a g e

Trainee will
get
introduction
of
Mercerizing
Machine, its
components

Learning
Element
Knowledge
of:
Mercerizing
process, its
types, faults
and
remedies
Ability to:
Perform
Mercerizing
process
efficiently
Check
Mercerizing
faults and
remedies
Knowledge
of:
Machine
parts and
components,
Machine
faults
Ability to:
Handle
Machine in
case of
emergency,

Theory
Hours
14 hours

4 hours

Practical
Hours

Materials
Required

Learning
Place

Projector

Class

Machine,
Fabric Lot

Workplace

4 hours

12 hours

3. Prepare
mercerizing
recipe

4. Adjust
parameters of
Machine

5. Carry out
washing off
and
neutralization
of fabric

23 | P a g e

Trainee will
get
acquaintance
with
different
mercerizing
methods and
the
mercerizing
recipes
specific to
each fabric.

Knowledge
of:
MACHINE
parameters,
SOPs for
operating
the
Machine,
Quality of
the fabric,
mercerizing
recipe
Ability to:
Operate the
Machine
following all
SOPs,
Accurate
quantity of
each
chemical
Trainee will Knowledge
get
of:
acquaintance Machine
with all the
parameters,
parameters
SOPs for
of the
operating
mercerizing the
range.
Machine,
Quality of
the fabric
Ability to:
Operate the
Machine
following all
SOPs
Trainee will Knowledge
get
of:
acquaintance Machine
with the
parameters,
washing
SOPs for
methods and operating
SOPs for
the
washing of
Machine,
the
Quality of
mercerized
the fabric,
fabric.
Washing
methods
Ability to:
Operate the
Machine

4 hours

12 hours

4 hours

12 hours

4 hours

12 hours

Mercerizing
chemicals

Workplace

workplace

Washing
Chemicals

Workplace

6. : Carry out
drying of
fabric

7. Mercerized
fabric
inspection

24 | P a g e

following all
SOPs
Trainee will Knowledge
get
of:
acquaintance Machine
with the
parameters,
drying
SOPs for
methods and operating
SOPs for
the
drying of the Machine,
mercerized
Quality of
fabric.
the fabric,
Washing
methods
Ability to:
Operate the
Machine
following all
SOPs
Knowledge
of:
Mercerizing,
its kinds,
Mercerizing
faults their
remedies,
Quality of
the fabric
Ability to:
Inspect the
fabric
according to
the SOPs

Thermometer
4 hours

Class/workplace

12 hours

Class/Workplace
4 hours

12 hours

Module:8 Title Dyeing

Objective of the Module Enabling Trainee to perform Dyeing
Duration218 hours.. Theory Hours46. Practical Hours172

Learning
Unit

Learning
Outcome

1.Introduction Trainee will

to Dyeing
get
introduction
of Dyeing
its types,
faults and
remedies

Learning
Element

Knowledge
of:
Dyeing
process, its
types, faults
and remedies
Ability to:
Perform
Dyeing
process
efficiently
Check Dyeing
faults and
remedies
2.Introduction Trainee will Knowledge
to Dyeing
get
of:
Machine
introduction Machine parts
of Dyeing
and
Machine, its components,
components Machine
faults
Ability to:
Handle
Machine in
case of
emergency,
3. Prepare
Trainee will Knowledge
dyeing recipe get
of:
acquaintance Machine
with
parameters,
different
SOPs for
dyeing
operating the
methods and Machine,
the dyeing
Quality of the
recipes
fabric,
specific to
dyeing recipe
each fabric.
Ability to:
Operate the
Machine
following all
SOPs,
Accurate
quantity of
25 | P a g e

Theory Practical Materials

Hours Hours
Required

Learning
Place

Projector

Class

Machine

Workplace

Chemicals,
Dyes

Workplace

30 hours 6 hours

6 hours

20 hours

6 hours

20 hours

4. Adjust
parameters of
Machine

5. Carry out
padding off

6. Carry out
washing off

7. Carry out
drying of
fabric

26 | P a g e

each chemical
Knowledge
of:
Machine
parameters,
SOPs for
operating the
Machine,
Quality of the
fabric
Ability to:
Operate the
Machine
following all
SOPs
Trainee will Knowledge
get
of:
acquaintance Quality of the
with the
fabric,
SOPs need
Chemicals
to be
neutralization,
followed for Fabric
feeding
checkup,
fabric to the SOPs for
padder and
feeding fabric
the pick up
to Machine
adjustment.
Ability to:
Check the
pick up of the
fabric.
Trainee will Knowledge
get
of:
acquaintance MACHINE
with the
parameters,
washing
SOPs for
methods and operating the
SOPs for
Machine,
washing of
Quality of the
the dyed
fabric,
fabric.
Washing
methods
Ability to:
Operate the
Machine
following all
SOPs
Trainee will Knowledge
get
of:
acquaintance Machine
with the
parameters,
Trainee will
get
acquaintance
with all the
parameters
of the
dyeing
Machine.

6 hours

20 hours

6 hours

20 hours

6 hours

20 hours

6 hours

20 hours

Safety
Gloves

workplace

Workplace

Washing
Chemicals

Workplace

Thermometer

Class/workplace

drying
methods and
SOPs for
drying of the
dyed fabric.

8. Dyed
fabric
inspection

SOPs for
operating the
Machine,
Quality of the
fabric,
Drying
methods
Ability to:
Operate the
Machine
following all
SOPs
Knowledge
of:
Dyeing, its
kinds, Dyeing
faults their
remedies,
Quality of the
fabric
Ability to:
Inspect the
fabric
according to
the SOPs

Class/Workplace
6 hours

20 hours

Module:9 Title Printing

Objective of the Module Enabling Trainee to perform Printing
Duration172 hours. Theory Hours32. Practical Hours140

Learning
Unit

Learning
Outcome

1.Introduction Trainee will

to Printing
get
introduction
of Printing
and
engraving,
its types,
faults and
remedies

27 | P a g e

Learning
Element
Knowledge
of:
Printing
process, its
types, faults
and
remedies
Ability to:
Perform
Printing
process
efficiently
Check
Printing
faults and
remedies

Theory
Hours
34 hours

Practical
Hours
12 hours

Materials
Required

Learning
Place

Projector

Class

2.Introduction Trainee will

to Printing
get
Machine
introduction
of Printing
Machine, its
components

3. Prepare
printing
recipe

4. Adjust
Machine
Parameters

5. Printed
fabric
28 | P a g e

Trainee will
get
acquaintance
with
different
printing
methods and
the printing
recipes
specific to
each fabric.

Knowledge
of:
Machine
parts and
components,
Machine
faults
Ability to:
Handle
Machine in
case of
emergency,

Knowledge
of:
Machine
parameters,
SOPs for
operating
the
Machine,
Quality of
the fabric,
Printing
recipe
Ability to:
Operate the
Machine
following all
SOPs,
Accurate
quantity of
each
chemical
Trainee will Knowledge
get
of:
acquaintance Machine
with all the
parameters,
parameters
SOPs for
of the
operating
PRINTING
the
Machine.
Machine,
Quality of
the fabric
Ability to:
Operate the
Machine
following all
SOPs
Knowledge
of:

6 hours

26 hours

6 hours

26 hours

6 hours

26 hours

Machine,
Fabric Lot

Workplace

Printing
chemicals,

Workplace

workplace

Class/Workplace

inspection

Printing, its
kinds,
Printing
faults their
remedies,
Quality of
the fabric
Ability to:
Inspect the
fabric
according to
the SOPs

6 hours

26 hours

Module:10 Title. Finishing

Objective of the Module Enabling Trainee to perform Finishing
Duration172 hours.. Theory Hours32. Practical Hours.140..

Learning
Unit

Learning
Outcome

1.Introduction Trainee will

to Finishing
get
introduction
of Finishing
its types,
faults and
remedies

2.Introduction Trainee will

to Finishing
get
Machine
introduction
of Finishing
Machine, its
components

29 | P a g e

Learning
Element

Theory
Hours

Practical
Hours

Materials
Required

Learning
Place

Knowledge
of:
Finishing
process, its
types, faults
and
remedies
Ability to:
Perform
Finishing
process
efficiently
Check
Scouring
faults and
remedies
Knowledge
of:
Machine
parts and
components,
Machine
faults
Ability to:
Handle
Machine in
case of
emergency,

20 hours

10 hours

Projector

Class

Machine

Workplace

4 hours

16 hours

3. Prepare
Finishing
recipe

4. Carry out
padding off

5. : Carry out
finishing on
stanter

30 | P a g e

Trainee will
get
acquaintance
with
different
Finishing
methods and
the
Finishing
recipes
specific to
each fabric.

Knowledge
of:
Machine
parameters,
SOPs for
operating
the
Machine,
Quality of
the fabric,
Finishing
recipe
Ability to:
Operate the
Machine
following all
SOPs,
Accurate
quantity of
each
chemical
Trainee will Knowledge
get
of:
acquaintance Quality of
with the
the fabric,
SOPs need
Fabric
to be
checkup,
followed for SOPs for
feeding
feeding
fabric to the fabric to
padder and
Machine
the pick up
Pick up of
adjustment.
the fabric,
Type of
finishing
Ability to:
Use the
required
finish to
fabric,
Check the
pick up of
the fabric.
Trainee will Knowledge
get
of:
acquaintance Machine
with all the
parameters,
parameters
SOPs for
of the stenter operating
Machine.
the
Machine,

4 hours

16 hours

4 hours

16 hours

4 hours

16 hours

Finishing
Chemicals

Workplace

workplace

Safety
Gloves

Workplace

6. Carry out
sanforizing

7. Carry out
calendering

8. Finished
fabric
inspection

31 | P a g e

Quality of
the fabric
Ability to:
Operate the
Machine
following all
SOPs
Trainee will Knowledge
get
of:
acquaintance MACHINE
with all the
parameters,
parameters
SOPs for
of the
operating
sanforizing
the
Machine and Machine,
the process
Quality of
of
the fabric
sanforizing. Ability to:
Operate the
Machine
following all
SOPs
Trainee will Knowledge
get
of:
acquaintance Machine
with all the
parameters,
parameters
SOPs for
of the
operating
calendering
the
Machine and Machine,
the process
Quality of
of
the fabric
calendering. Ability to:
Operate the
Machine
following all
SOPs
Knowledge
of:
Finishing,
its kinds,
Finishing
faults their
remedies,
Quality of
the fabric
Ability to:
Inspect the
fabric
according to
the SOPs

Class/workplace
4 hours

16 hours

4 hours

16 hours

Workplace

Class/Workplace
4 hours

18 hours

Module: 11 Title Carry out Final Inspection

Objective of the Module Enabling Trainee to carry out final inspection
Duration84 hours.. Theory Hours..24... Practical Hours.60 hours.

Learnin
g Unit

Learning
Outcome

Learning
Element

1. Carry
out
surface
inspection

Trainee will
get
acquaintanc
e with the
surface
inspection
of the fabric
after all
processes.

Knowledge
of:
Required
fabric
characteristics
achieved or
not?,
Surface
inspection
methods

2. Carry
out color
inspection

Trainee will
get
acquaintanc
e with the
color
inspection
and shade
checking.

3.
Marking

Trainee will
get
acquaintanc
e with the
standard
operating
procedures
to follow for
carrying out
the marking
of the
processed

32 | P a g e

Ability to:
Do surface
inspection
following
SOPs
Knowledge
of:
Required
fabric shade
properties,
Fabric shade
quality
Ability to:
Judge the
desired fabric
shade,
Knowledge
of:
Basic
knowledge of
the properties
of the fabrics
for their
marking,
Ability to:
Mark the
different types
of fabrics

Theor
y
Hours

Practica
l Hours

4 hours

8 hours

4 hours

8 hours

4 hours

8 hours

Materials
Required

Learning Place

GSM Cutter,
Ends, picks/inch
counter,
Magnifying Glass,

Workplace

Spectrophotometer

Workplace/Lab

Tailor Chalk

Workplace

Fabrics.

4.
Grading

5. Packing
as per
grading

33 | P a g e

Trainee will
get
acquaintanc
e with the
standard
operating
procedures
to follow for
carrying out
the grading
of different
types of
Fabrics.

Trainee will
get
acquaintanc
e with the
standard
operating
procedures
to follow for
carrying out
the packing
of different
types of
Fabrics.

following the
rules already
set for
marking of
fabrics
depending
upon their
characteristics
.
Knowledge
of:
Basic
knowledge of
the properties
of the fabrics
for their
grading,
Ability to:
Grade the
different types
of fabrics
following the
rules already
set for grading
of fabrics
depending
upon their
characteristics
.
Knowledge
of:
Basic
knowledge of
the properties
of the fabrics
for their
packing,
Ability to:
Grade the
different types
of fabrics
following the
rules already
set for
packing of
fabrics
depending
upon their
characteristics
.

Class/workplace
4 hours

8 hours

4 hours

8 hours

Polythene sheets

Workplace

Module: 12 Title Adopt Safety measures

Objective of the Module Enabling Trainee to adopt safety measures .
Duration42 hours.. Theory Hours12 hours.. Practical Hours30

Learning
Unit

Learning
Outcome

1. Apply
Personal
Safety

Trainee will
get
acquaintance
with all the
safety
measures
need to be
followed for
personal
safety.

2. Apply
workplace
safety

3. Apply
safety for
tools and
Equipment

34 | P a g e

Learning
Element

Knowledge
of:
Basic Safety
Measures,
Safety
Precautions
Ability to:
Follow the
SOPs for
personal
safety.
Trainee will Knowledge
get
of:
acquaintance Basic Safety
with all the
Measures,
safety
Safety
measures
Precautions
need to be
Ability to:
followed in
Follow the
the
SOPs for
workplace.
workplace
safety.
Trainee will Knowledge
get
of:
acquaintance Basic Safety
with all the
Measures,
safety
Safety
measures
Precautions
need to be
Ability to:
followed in
Follow the
the for
SOPs for
proper
safety using
handling of
the tools
the tools and and
equipments. equipments.

Theory
Hours

Practical
Hours

6 hours

8 hours

6 hours

8 hours

6 hours

8 hours

Materials
Required

Learning
Place

Safety
Gloves,
Safety
Goggles,

Class/Workplace

Fire
Class/Workplace
Extinguishers,
Inhalers,
First Aid
Boxes

Tools and
Equipment
brushers and
manuals

Class/Workplace

Module: 13 Title Communicate with others

Objective of the Module Enabling Trainee to communicate with others
Duration21 hours Theory Hours6 hours. Practical Hours15 hours

Learning
Unit

Learning
Outcome

Learning
Element

Theory
Hours

Practica
l Hours

1.
Communicat
e with coworkers

Trainee will
get
acquaintance
with all the
basic
communicati
on skills
necessary to
communicate
with others.

Knowledge of:
Basic
communication
skills,

1 hour

6 hours

1 hour

6 hours

1 hour

6 hours

2.
Communicat
e with
customer

3.
Communicat
e with
supervisor

35 | P a g e

Trainee will
get
acquaintance
with all the
basic
communicati
on skills and
presentation
techniques
necessary to
communicate
with
customers.

Trainee will
get
acquaintance
with all the
basic
communicati
on skills
necessary to
communicate
with others.

Ability to:
Follow
communication
skills while
dealing other
co-workers
Knowledge of:
Basic
communication
skills,
Basic
presentation
skills to attract
customers
Ability to:
Follow
communication
skills and
presentation
skills while
dealing
customers
Knowledge of:
Basic
communication
skills,
Ability to:
Follow
communication
skills while
dealing others

Material Learning Place

s
Required
Class/Workplace

Class/Workplace

Class/Workplace

Module:14 Title Develop professionalism

Objective of the ModuleDeveloping professionalism in the trainee.
Duration42 hours Theory Hours.12 hours. Practical Hours30 hours..
Learning
Unit

Learning
Outcome

Learning
Element

Theory
Hours

Practical
Hours

1.
Participate
in training

Trainee will
get way to
participate in
training
programs run
for the
upgradation of
the technical
knowledge of
the workers.

Knowledge of:
Basic technical
knowledge,
Good listening
attitude

3 hours

07 hours

1 hours

6 hours

1 hours

6 hours

2. Interact
with
colleagues

3. :
Consult
with the
experts

36 | P a g e

Ability to:
Listen
carefully and
main points to
write down.
Trainee will
Knowledge of:
get
Basic
acquaintance
communication
with all the
skills,
basic
Basic technical
communication knowledge
to
Ability to:
communicate
Follow
with other cocommunication
workers and
skills and share
share technical technical
knowledge.
knowledge
with
colleagues.
Trainee will
Knowledge of:
get
Basic
acquaintance
communication
with all the
skills,
basic
Basic technical
communication knowledge
skills to
ATTITUDE
communicate
OF
with technical
LISTENING
experts.
Ability to:
Follow
communication
skills and share
technical
knowledge
with
colleagues and
hear to

Materials
Required

Learning
Place

Projector

Class/Workplace

Class/Workplace

Class/Workplace

4.
Participate
in skill test

37 | P a g e

technical
experts.
Trainee will
Knowledge of:
get
Basic
acquaintance
communication
with all the
skills,
basic
Basic
communication presentation
skills and
skills,
presentation
Basic
techniques
Technical
necessary to
knowledge
get into the
skill tests.
Ability to:
Follow
communication
skills and
presentation
skills,
Use of
technical
knowledge

Class/Workplace
4 hours

8 hours

Assessment Template
Module # 1
Learning
Units

Theory
Workplace
Days/hours Days/Hours

Recommended
Formative
Assessment

Collection of
sample
0.5 hours

0.5 hours

1 hour

Selection of
Sample
0.5 hours

Deliver
Sample to
Lab

Placing of
Order to
Supplier

0.5 hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

38 | P a g e

0.5 hours

Scheduled
Dates

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.

As
suggested
by
Trainees
Teacher

Short answer questions

test.

As
suggested
by
Trainees
Teacher

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test
requiring diagrams

As
suggested
by
Trainees
Teacher

1 hour

Receiving of
material
0.5 hours

Recommended
Methodology

1 hour

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

Demonstration by
trainee
Multiple Choice
Questions

Module # 2
Learning
Units
Carry out
surface
inspection

Theory
Days/hours

0.5 hours

Workplace
Days/Hours

Recommended
Formative
Assessment

0.5 hours
1 hour

Carry out
grading

0.25 hours

0.75 hours

Dispatch
fabric to lab

0.5 hours

0.5 hours

1 hour

1 hour

39 | P a g e

Recommended
Methodology

Scheduled
Dates

Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Demonstration by
trainee
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

Carry out
quantitative
analysis

0.5 hours

0.5 hours

1 hour

Recommended
Formative
Assessment
1 hour

Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions

As
suggested
by
Trainees
Teacher

Recommended
Methodology

Scheduled
Dates

Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Demonstration by
trainee
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Demonstration by
trainee
Multiple Choice
Questions

As
suggested
by
Trainees
Teacher

Module # 3
Learning
Units

Theory
Days/hours

Workplace
Days/Hours

Introduction
to Singeing

0.5 hours

0.5 hours

0.5 hours

0.5 hours

Introduction
to Singeing
machine

40 | P a g e

1 hour

As
suggested
by
Trainees
Teacher

Load fabric to
Machine
0.5 hours

0.5 hours

Adjust flame
intensity

0.5 hours

0.5 hours

Adjust speed
of fabric

0.5 hours

0.5 hours

0.5 hours

0.5 hours

Adjust
distance
between
flame &
fabric

41 | P a g e

1 hour

1 hour

1 hour

1 hour

Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Demonstration by
trainee
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

Adjust angle
of flame

0.5 hours

0.5 hours

Start singeing
Machine

0.5 hours

0.5 hours

Singed Fabric
Inspection

0.5 hours

0.5 hours

42 | P a g e

1 hour

1 hour

1 hour

requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

Module # 4
Learning
Units

Theory
Days/hours

Workplace
Days/Hours

Recommended
Formative
Assessment

Introduction to
Desizing
0.5 hours

Introduction to
Desizing
machine

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Prepare
desizing recipe
0.5 hours

Adjust
parameters of
Machine
43 | P a g e

0.5 hours

0.5 hours

0.5 hours

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Demonstration by
trainee
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Demonstration by
trainee
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

As
suggested
by

1 hour

Set desizing
rotation time of
batch

Carry out
washing off/
Neutralization

0.5 hours

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Desized Fabric
Inspection
0.5 hours

44 | P a g e

0.5 hours

1 hour

trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions
Direct observation
from practical
demonstration by
trainee in the
workplace whilst
being safety
conscious.
Short answer
questions test.
Illustrative test
requiring diagrams
Multiple Choice
Questions

Trainees
Teacher

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

As
suggested
by
Trainees
Teacher

Module # 5
Learning Units

Theory
Days/hours

Workplace
Days/Hours

Recommended
Formative
Assessment

Introduction to
Scouring
0.5 hours

Introduction to
Scouring
machine

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Prepare
Scouring recipe
0.5 hours

Adjust
parameters of
Machine

45 | P a g e

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by
trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by
trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Carry out
washing off
0.5 hours

0.5 hours

1 hour

Scoured Fabric
Inspection
0.5 hours

0.5 hours

Theory
Days/hours

Workplace
Days/Hours

1 hour

Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by
trainee
Multiple Choice
Questions

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Module # 6
Learning
Units

Recommended
Formative
Assessment

Introduction
to Bleaching
0.5 hours

Introduction
to Bleaching
machine

46 | P a g e

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice Questions
Direct observation from
practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions test.
Illustrative test requiring
diagrams

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Prepare
bleaching
recipe

Adjust
parameters of
Machine

0.5 hours

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Set steamer
parameters
0.5 hours

0.5 hours

1 hour

Carry out
washing off
0.5 hours

Bleached
Fabric
Inspection

47 | P a g e

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Demonstration by trainee
Multiple Choice Questions
Direct observation from
practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions test.
Illustrative test requiring
diagrams
Multiple Choice Questions
Direct observation from
practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions test.
Illustrative test requiring
diagrams
Multiple Choice Questions
Direct observation from
practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions test.
Illustrative test requiring
diagrams
Multiple Choice Questions
Direct observation from
practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice Questions
Direct observation from
practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions test.
Illustrative test requiring
diagrams
Multiple Choice Questions

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Module # 7
Learning
Units

Theory
Days/hour
s

Workplace
Days/Hours

Recommended
Formative
Assessment

Introduction to
Mercerizing
0.5 hours

Introduction to
Mercerizing
machine

Prepare
mercerizing
recipe

Checking
Machine
parameters

48 | P a g e

0.5 hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

1 hour

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by
trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by
trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Carry out
washing off
and
neutralization
of fabric

Carry out
drying of
fabric

Mercerized
Fabric
Inspection

0.5 hours

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

0.5 hours

0.5 hours

1 hour

Theory
Days/hours

Workplace
Days/Hours

Recommended
Formative
Assessment

Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Module # 8
Learning
Units
Introduction
to Dyes and
Dyeing

49 | P a g e

0.5 hours

0.5 hours

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams

As suggested by
Trainees Teacher

Introduction
to Dyeing
machine

0.5 hours

0.5 hours

1 hour

Prepare
dyeing recipe
0.5 hours

Adjust
parameters of
Machine

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Carry out
padding off
0.5 hours

Carry out
50 | P a g e

0.5 hours

1 hour

Demonstration by trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions
Direct observation from

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by

dyeing of
fabric

1 hour
0.5 hours

0.5 hours

Carry out
washing off
0.5 hours

0.5 hours

1 hour

Drying
0.5 hours

0.5 hours

1 hour

Dyed Fabric
Inspection
0.5 hours

51 | P a g e

0.5 hours

1 hour

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions

Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Module # 9
Learning
Units
Introduction
to Printing
and
Engraving

Introduction
to Printing
machine

Prepare
printing
recipe

Adjust
Machine
Parameters

52 | P a g e

Theory
Workplace
Days/hours Days/Hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

Recommended
Formative
Assessment
1 hour

1 hour

1 hour

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions
Direct observation from
practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions
Direct observation from
practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Printed
Fabric
Inspection

0.5 hours

0.5 hours

1 hour

Direct observation from

practical demonstration by
trainee in the workplace
whilst being safety
conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions

As suggested by
Trainees Teacher

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams

As suggested by
Trainees Teacher

Module # 10
Learning
Units

Theory
Workplace
Days/hours Days/Hours

Recommended
Formative
Assessment

Introduction
to Finishing
0.5 hours

Introduction
to Finishing
machine

Prepare
Finishing
recipe

53 | P a g e

0.5 hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

1 hour

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Carry out
padding off
0.5 hours

Carry out
finishing on
stanter

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Carry out
sanforizing
0.5 hours

0.5 hours

1 hour

Carry out
calendering
0.5 hours

Finished
Fabric
Inspection

54 | P a g e

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Printed Fabric
Inspection

safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Demonstration by trainee
Multiple Choice
Questions

Module # 11
Learning
Units

Theory
Days/hours

Workplace
Days/Hours

Recommended
Formative
Assessment

Final
inspection
0.5 hours

Carry out
color
inspection

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

Marking
0.5 hours

0.5 hours

1 hour

Packing as
per grading
0.5 hours

55 | P a g e

0.5 hours

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Dispatch end
product
Grading

Surface
Inspection
and Mending

0.5 hours

0.5 hours

0.5 hours

0.5 hours

1 hour

1 hour

safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Module # 12
Learning
Units
Apply
Personal
Safety

Apply
workplace
safety

56 | P a g e

Theory
Workplace
Days/hours Days/Hours

0.5 hours

0.5 hours

0.5 hours

0.5 hours

Recommended
Formative
Assessment
1 hour

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Apply safety
for tools and
Equipment

0.5 hours

0.5 hours

1 hour

Short answer questions

test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions

As suggested by
Trainees Teacher

Module # 13
0Learning
Units
Communicate
with coworkers

Theory
Days/hours

0.5 hours

Workplace
Days/Hours

0.5 hours

Recommended
Formative
Assessment
1 hour

Communicate
with others
0.5 hours

0.5 hours

1 hour

Communicate
with supervisor
0.5 hours

57 | P a g e

0.5 hours

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

test.
Illustrative test requiring
diagrams
Multiple Choice
Questions

Module # 14
Learning
Units

Theory
Workplace
Days/hours Days/Hours

Recommended
Formative
Assessment

Participate in
training
0.5 hours

0.5 hours

1 hour

Interact with
colleagues
0.5 hours

0.5 hours

1 hour

Consult with
the experts
0.5 hours

0.5 hours

1 hour

Participate in
skill test
0.5 hours

58 | P a g e

0.5 hours

1 hour

Recommended
Methodology

Scheduled
Dates

Direct observation from

practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.
Illustrative test requiring
diagrams
Multiple Choice
Questions
Direct observation from
practical demonstration
by trainee in the
workplace whilst being
safety conscious.
Short answer questions
test.

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

As suggested by
Trainees Teacher

Illustrative test requiring

diagrams
Multiple Choice
Questions

Tools & Equipment Template

Name of Trade
Duration

Textile wet Processing

1 Year

Tools and Equipment

Sr
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

Name of Item/ Equipment/ Tools

GSM Cutter
Picks/Ends Counting Glass
Magnifying Glass
Needles
Delivering Trolley/ Container
Fabric Trolley
Singeing Machine
Thermometer
Tachometer
Tension Meter
Microscope
Inspection Frame
Desizing Machine
Batch Rotator
Tegwa Scale
Scouring Machine
Stitching Machine
Bleaching Machine
Spectrophotometer
Mercerizing Machine
Dyeing Machine
Grey Scale
Printing Machine
Engraving Machine
Frame
Stenter
Sanforising Machine
Calendering Machine
Helmet
Heavy Duty Shoes
Safety Googles
Measuring Tape

59 | P a g e

Qty.
3
3
10
3
24
3
2
4
2
2
1
2
1
1
2
1
1
1
1
1
1
5
1
1
5
1
1
1
5
5
5
5

Consumable Supplies
Sr
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Name of Consumable Supplies

Fabric Lot
Fabric Samples
Face Mask
Gloves
Tape
Desizing Chemicals
PH Strips
Chemicals for Neutralization
KI Solution
Chemicals for Scouring Recipe
Washing Detergents
Chemicals for Bleaching, Mercerizing, Dyeing, Printing and Finishing purposes
Tailor Chalks
Paper Tubes
Packing Cartons
Ear Plugs
First Aid Boxes
Fire Extinguishers
Inhalers
Brushes

60 | P a g e

References
1. Textile Science by E.P.G. Gohl, 1995
2. Cellulosic Dyeing by John Shore, 1995
3. Blends Dyeing by John Shore, 1995
4. Dyeing and Chemical Technology of Textile Fibers by E.R.Trotman
5. Textile Printing by W.C. Miles, SDC UK, 2003 Second Edition
6. Textile Finishing by Derek Heywood, SDC UK Publishers,2003
7. Critical Solutions in the Dyeing of Cotton Textile Materils, Textile Progress by R.Shamey
and T. Hussain, Vol 37, No , 2005
8. Textile Testing Physical chemical Microscopic by John H Skinkle, 2 nd Edition 1972
9. Wet Processing of Cellulosic Textiles by Ahmad Niaz, Karachi 2000
10. Quality Control Materials, AATCC Publishers

61 | P a g e

Contributions for Development of This Curriculum

DACUM Working Group

Mr. Muhammad Ayyub, US Apparel, Lahore

Mr. Ali Ashraf, US Apparel, Lahore

Mr. Kashif Qamer, US Apparel, Lahore

Mr. Umair Khalid, US Apparel, Lahore

Mr. Javed Iqbal, US Denim, Lahore

Mr. Waheed Ahmed, Aruj Garments, Lahore

Mr. Rana Amjad, US Denim, Lahore

Mr. Naveed Ahmed, R.G Industries, Lahore

Mr. Rizwan Yaqoob, US Apparel, Lahore

Mr. Talib Raza, U.D,Lahore

Mr. Mudassar Ali, US Apparel, Lahore

Mr. Haseeb Akram, Sarena Textiles, Lahore

Mr. Umar Mukhtar, Sitara Group, Faisalabad

Curriculum Developer
Mr. Faisal Bashir
BE Wet Processing

Dr. Nabeel Amin

Director, School of Textile and Design (STD),
Lahore.

National Curriculum Review Committee (NCRC) Members

Mr. Muhammad Umair
Assistant Professor, University of Management
& Technology, Lahore
Ch. Yasir
Assistant Manager, US Apparel
Mr. Umair Khalid
Assistant Manager,US Apparel Pvt. Ltd.
Dr. Uzma Syed
Assistant Professor
Mehran University of Engineering &
Technology, Jamshoro
Engr. Shoukat Ali Khan
Director, AJK TEVTA, Muzaffarabad

Syed Muhammad Qutub

Mr.Zaheer Abbass
Project Manager
TEVTA,Punjab
Engr.Aziz Ahmed
Chief Operating Officer
Haizum Hi Tech Textile
Mr. Ghulam Haider
Supervisor
Sitara Textile Ltd. Faisalabad

DACUM Facilitator

DACUM Coordinator

Ms. Sadia Abbasi

Assistant Director, NAVTTC, Islamabad

Mr. Muhammad Nasir Khan

Deputy Director, NAVTTC, Islamabad

62 | P a g e