Can K

Artificial Lift Solutions
Surface & Subsurface Pumps
Twin Screw
Technology
Artificial Lift Solutions Artificial Lift Solutions Artificial Lift Solutions

Artificial Lift Solutions Artificial Lift Solutions
Artificial Lift Solutions Artificial Lift Solutions
p
We pum
molten
oo
metal t
CAN-K the Company

Under License from CAN-K PME
CAN-K Artificial Lift Systems Inc. was established to focus
exclusively on artificial lift solutions for the oil and gas
industry. CAN-K offers a complete range of industry
recognized pumps and associated products, while also
offering some new leading edge technologies.
Over the years CAN-K PME has developed and patented
several artificial lift technologies that have become standard
industry artificial lift solutions. In the quest to lead the
industry in product development, CAN-K is always looking
to improve and replace existing technology, thus offering
our clients new cost effective solutions for their reservoirs.
Surface Transfer Twin

Screw Multiphase Pumps
The Technology
CAN-Ks surface technology was originally developed by
Can-K PME and is a patented technology which involves
features which are not offered by our competitors. CAN-K
PME which is also involved in twin screw natural gas
compressor manufacturing and has used its combined
knowledge of both compressor and pump know-how to
develop the Surface Twin screw Multiphase Pumps.
Features:
High pressure capability
Extensive Range of products:

ESTSP (Electric Submersible Twin Screw Pumps )
Custom manufactured diamond/diamond

mechanical seals for high temperature
Can run dry for long periods of time
TDTSP (Top Drive Twin Screw Pump)

Electric Top Drives
Hydraulic Top Drives
Zero Leak Stuffing Box
Natural gas CAN-K twin screw compressors and
compressor packages
CAN-K manufactured stacked pad bearings

which means no L10 life for the bearings
Unequal screw design
Remove pump without disconnecting flanges;
pump installed on rails
Proprietary screw profile; high gas capability, low
slip screws; least blow hole screw profiles
Adiabatic compression
Surface twin screw Multiphase pumps

Slim design
Down hole twin screw natural gas compressors

Custom positive displacement pumps and pumping
systems
Research & Development in positive displacement
pumps and pumping systems both for down hole
and surface
We pride ourselves to be the best in the industry for pumps
and pumping systems for oil and gas sector.
Low Blow Hole High Pressure Screw Profile
High speed capability

Multiple intakes and connect several wells to one
pump
Pumping of crude oil/water/sand/high gas GVF of up
to 98% or slugs of 100%
Installation of ESTSP
Subsea wet gas compression pumping systems
sand
Tear down
Installation
(Hybrid Adiabatic Compression)
Surface Transfer Twin Screw Multiphase Pump

(Patented Down Hole Technology On Surface)
(A CAN-K PME Design)
No L10 Life - No Antifriction Bearings
Advantages:
Capacity and Pressures:
Remove back pressure from wells
CAN-K surface twin screw multiphase pumps are generally custom

manufactured.
Save on capital expenditure on surface facilities
Pressure of up to 3500 psig (242 bar) even with

low viscosities
Booster pumps
Capacity from 150 to 350,000 bbl/day
Increase in production if the well has Sufficient PI
Subsea Multiphase Twin Screw Pumps:

Increase production in low bottom hole pressure
wells with combination of down hole twin screw
multiphase pump and surface transfer twin
screw multiphase pumps
Fully automated systems provided
Phase - 1 study complete
Subsurface Twin Screw Pump
Patented Down Hole Technology
ESTSP (Electric submersible twin screw pump)

TDTSP [Top drive (driven) twin screw pump]
General Specifications:
Advantages:
Volume:
Very low shear rate and hence, least emulsion

compared to ESP
24 m3/day to 8898 m3/day (150 to 56,000 bbl/day)
Pressure Capability:
Up to 3,500 psi
Low HP compared to centrifugal pumps (up to

40% HP savings)
Temperature Capability:
Positive displacement pump
350C (662F) - using subsurface hydraulic motor
Casing Sizes:
From 139.7mm to 339.9mm (51/2" to 133/8") casing
suitability. Slim design of 3.7'' diameter
Drive:
Handles gas
Abrasion resistance coatings are provided on screws
and housing;WC/diamond composite
coatings/zirconia
Electric Submersible Motor or CAN-K top drive.

CAN-K top drive for high temperatures only
High efficiency
Speed:
Up to 6000 rpm
Can replace existing ESP directly with existing motor

and CAN-K pump
Power:
Inherently balanced for high speed capability
Up to 1200 HP (limitations on down hole motor)
Medium:
Multiphase
Abrasion Protection:
Can be installed in vertical, slanted or horizontal wells

High Temperature capability of up to 316C (662F)
with CAN-K top drive
Tungsten coating/diamond composite

coating/zirconia coating
Mechanical Seals:
CAN-K custom manufactured including
diamond/diamond faces
Screw:
Varying materials depending upon application. Shell design
Installation:
Installed exactly like an ESP system and suitable for all
available Standard electric submersible motors.
Alternatively installed with sucker rod
Thrust:
Independently built in thrust section
ESTSP
(Electric Submersible Twin Screw Pump)
TDTSP
[Top drive (driven) twin screw pump]

PATENTED
Unequal High Pressure Screw Designs
Slim design screws

MAIN ROTOR
GATE ROTOR
Tear down of high

temperature pump
End View Of Unequal Screw Design
Patented thrust bearings

High Temperature Test
Minimum
Slim
Minimum
Volume
Volume
Differential
Casing Size
size
Diameter
Single Intake
Double Intake
Pressure
(inches)
(inches)
(inches)
51/2
3.7
4.00
150 bbl/day to
NA
900 psig
150 bbl/day to
300 bbl/day to
3500 psig
5200 bbl/day
10,400 bbl/day
1000 bbl/day to
2000 bbl/day to
17,500 bbl/day
35,000 bbl/day
4000 bbl/day to
custom designed
56,000 bbl/day
only
4000 bbl/day
95/8
133/8
4.90
NA
11.00
5.38
7.75/6.75
12.50
3500 psig
3500 psig
Notes:
1.
Due to improvement in design all parameters are subject to change without notice.
4.
Maximum HP - 1200
2.
Contact CAN-K for variations in sizes or other details not listed.
5.
Maximum Pressure - 3500 PSIG
3.
Custom designed pumps are offered for major projects.
Twin Screw Technology
Tear Down Of Pump After High Sand Offshore Installation
Advantages and Disadvantages of ESTSP/TDTSP

(CAN-Ks pumps) versus ESP, PC Pumps and Gas lift.
ESP
Centrifugal
pump
High intake
pressure
required
Very high shear
High emulsion
Asphaltenes
will break out
Cannot handle scale
High hp requirement
Low maintenance
Handles light to
medium viscosity
Huge expenditure in
anti emulsifying
chemicals and
environment issues
Must choke on
surface and major
emulsions due to
choking
Not suitable with
high gas
High pressure
capability
Handles up to
56,000 bbl/day
down hole
Can be run only by
submersible motors
There is BEP and
fixed range
Speed, Capacity and
Pressures are
intertwined.
Up thrust and down
thrust issues
NA
Will gas lock

Pumps during
complete operation
Handles only up to
the temperature of
the motor +218 deg C
maximum-motor
temperature.
Old and proven

technology for more
than 60 years
Manufactured in mass
and very competitive in
pricing
ESTSP/TDTSP
Positive
displacement
pump
Extreme low intake
pressure requirement
and can also go
to vacuum
Very low shear
Nil to minimal
emulsion
Asphaltenes will not
break out
Good tolerance to scale
PC
Positive
displacement
pump
Low intake
pressure
requirement
Gas Lift
NA
Very low shear

Low
emulsion
Asphaltene will
react with elastomer
Satisfactory to
scales
Very high shear

Extremely high
emulsion
Asphaltenes will break
out
Mixed version on
scale build up
Extremely low hp
requirement when in
heavy oil
Low maintenance
More than twin

screw pump
Very high hp
requirement
High maintenance
Handles low and high

viscosity medium well
No expenditure.
Zero to minimal
emulsions
Handles high
viscous medium only
No expenditure.
Zero to minimal
emulsions
Very high
maintenance
Handles consistent
low viscosity.
Low emulsions
No choking required
No choking required
Low maintenance
other than wear
Handles low viscous
medium
Very high emulsions
and huge
expenditure on
chemicals
NA
Multiphase and
handles gas
Gas reacts with

elastomer
Handles gas
Not suitable for

flashing or variations
in phases
High pressure
capability
Low pressure
capability
Very expensive for high

pressure capability
Sufficient pressure
capability
Handles up to
56,000 bbl/day
down hole
Can be run by
submersible or
surface systems
No BEP
Do not choke
Handles only
around
12,000 bbl/day
Can be run by
surface and
submersible systems
No BEP
Handles mid range
Handles low capacity
NA
Sucker rod only
NA
Strokes per minute are

the only adjustments
available
SPM are the adjustments
available
NA
Major sucker rod

breakage due to thrust
and intake pressure
adjustments
NA
Handles gas well
Changes in phase while

pumping stroke could
damage rods and pumps
Idles during intake
filling time
Handles High
temperatures
Speed determines
only capacity and
not connected with
pressures
No up and down
thrust issues
When run on rods
there is no axial
load-free floating, rods
and centralized.
Will not gas lock.
Pumps during the
complete operation
Handles up to 280 deg C
with surface motors.
Testing on going for up to
315 deg Celsius.
DASS motor (hydraulic
motor) is being bench
tested to take above
350 deg C for Huff & Puff
applications.
New technology.
Identifications of new
applications are on going.
Expensive when manufactured
one off. Volume discount
offered.
No up and down
thrust
NA
Severe axial loading

and tubing wear
Gas will react burning
the stator and swelling
it
Pumps during the
complete operation
Handles below
150 deg C
Old proven technology

for more than
25 years
Lower capital cost
NA
Handles up to 210 deg C
with major cooling
systems and not
competitive
Old and proven technology

for more than 30 years or
more
Overall equipment is
expensive
Beam Pumps
Positive
Displacement
Pumps
Close control
of intake pressure
recommended
COMMENTS
PC pumps have
elastomer and CAN-K
pumps is all steel
Low shear
Low emulsion
Asphaltenes will clog
movement.
Scale will clog
movement and
damage pump
Low hp requirement
Variations in viscosity in beam pumps

will create severe fluctuations
No choking required
Beam pumps could

damage rods if
pressure requirements
keep changing during
the stroke
Old and proven technology

Competitive pricing
Electric Top Drive:
Hydraulic Top Drive:
Up to 400 HP
Maximum speed 500 rpm
High Heat Dissipation disc braking
Maximum HP of 140 HP
system
Maximum polished rod torque of 2100 ft lb
High Speed capability of up to 800
Well Head drive with direct hydraulic
motor/geared motor/sheave type
RPM
Thrust Capability of 33,400 to
130,000 lbs
Thrust loading 20,200 lbs (higher

capacity on request)
Ratio of 4:1 belt drive or other

sheave combinations
Direct motor mounted as optional
Maximum polished rod torque of
3750 ft. lb
Custom manufactured sucker
rods of up to 7000 ft. lbs
Hydraulic Top Drive
Electric Top Drive(A CAN-K PME Design)
Tooth and Claw Design
Installation
Installation
10
8220 Davies Road

Pump Test Facility
Edmonton, Alberta
Canada, T6E 4N2
Phone: (780) 440-1272
(780) 426-4800
Fax: (780) 462-2897
(780) 426-3044
Web: www.can-k.com
Innovative Technology
Quality Products

Can K

Uploaded by

Copyright:

Available Formats

Can K

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Can K

Uploaded by

Copyright:

Available Formats

Artificial Lift Solutions

Surface & Subsurface Pumps

Artificial Lift Solutions Artificial Lift Solutions Artificial Lift Solutions

CAN-K the Company

Surface Transfer Twin

Extensive Range of products:

Custom manufactured diamond/diamond

TDTSP (Top Drive Twin Screw Pump)

CAN-K manufactured stacked pad bearings

Surface twin screw Multiphase pumps

Down hole twin screw natural gas compressors

Low Blow Hole High Pressure Screw Profile

High speed capability

Subsea wet gas compression pumping systems

(Hybrid Adiabatic Compression)

Surface Transfer Twin Screw Multiphase Pump

No L10 Life - No Antifriction Bearings

Capacity and Pressures:

Remove back pressure from wells

CAN-K surface twin screw multiphase pumps are generally custom

Save on capital expenditure on surface facilities

Pressure of up to 3500 psig (242 bar) even with

Subsea Multiphase Twin Screw Pumps:

Fully automated systems provided

Phase - 1 study complete

Subsurface Twin Screw Pump

Patented Down Hole Technology

ESTSP (Electric submersible twin screw pump)

Very low shear rate and hence, least emulsion

24 m3/day to 8898 m3/day (150 to 56,000 bbl/day)

Low HP compared to centrifugal pumps (up to

Positive displacement pump

350C (662F) - using subsurface hydraulic motor

Electric Submersible Motor or CAN-K top drive.

Can replace existing ESP directly with existing motor

Inherently balanced for high speed capability

Up to 1200 HP (limitations on down hole motor)

Can be installed in vertical, slanted or horizontal wells

Tungsten coating/diamond composite

(Electric Submersible Twin Screw Pump)

[Top drive (driven) twin screw pump]

Unequal High Pressure Screw Designs

Slim design screws

Tear down of high

End View Of Unequal Screw Design

Patented thrust bearings

Contact CAN-K for variations in sizes or other details not listed.

Maximum Pressure - 3500 PSIG

Custom designed pumps are offered for major projects.

Twin Screw Technology

Tear Down Of Pump After High Sand Offshore Installation

Advantages and Disadvantages of ESTSP/TDTSP

Will gas lock

Old and proven

Very low shear

Very high shear

More than twin

Handles low and high