Scribd Logo
Upload

Welcome to Scribd!

  • 327 views

    Pneumatic Actuator 11 21 Datasheet English

    Uploaded by

    Santiago Liñán Romero
    This document provides information on pneumatic actuators models PA 11 and PA 21, including: - They are full plastic actuators with robust PP-GF housing, position indicator, and fast cycle times. - PA 11 is for ball valves from DN10-DN25 and PA 21 for DN32-DN50. - They have nominal torques of 10Nm and 20Nm respectively and operate via a rack and pinion mechanism powered by compressed air or neutral gas. - Various accessories are available including solenoid valves, positioners, and limit switches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pneumatic Actuator 11 21 Datasheet English

    Uploaded by

    Santiago Liñán Romero
    327 views4 pages
    This document provides information on pneumatic actuators models PA 11 and PA 21, including: - They are full plastic actuators with robust PP-GF housing, position indicator, and fast cycle times. - PA 11 is for ball valves from DN10-DN25 and PA 21 for DN32-DN50. - They have nominal torques of 10Nm and 20Nm respectively and operate via a rack and pinion mechanism powered by compressed air or neutral gas. - Various accessories are available including solenoid valves, positioners, and limit switches.

    Original Description:

    Data sheet of 11 21

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on pneumatic actuators models PA 11 and PA 21, including: - They are full plastic actuators with robust PP-GF housing, position indicator, and fast cycle times. - PA 11 is for ball valves from DN10-DN25 and PA 21 for DN32-DN50. - They have nominal torques of 10Nm and 20Nm respectively and operate via a rack and pinion mechanism powered by compressed air or neutral gas. - Various accessories are available including solenoid valves, positioners, and limit switches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    327 views4 pages

    Pneumatic Actuator 11 21 Datasheet English

    Uploaded by

    Santiago Liñán Romero
    This document provides information on pneumatic actuators models PA 11 and PA 21, including: - They are full plastic actuators with robust PP-GF housing, position indicator, and fast cycle times. - PA 11 is for ball valves from DN10-DN25 and PA 21 for DN32-DN50. - They have nominal torques of 10Nm and 20Nm respectively and operate via a rack and pinion mechanism powered by compressed air or neutral gas. - Various accessories are available including solenoid valves, positioners, and limit switches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4
    At a glance
    Powered by AI
    The document discusses pneumatic actuators and how they can be combined with ball valves. It provides details on the components, specifications, and operating modes of the actuators.

    The main components of the pneumatic actuator are the housing, piston, rack, pinion, springs and connectors for control air.

    The pneumatic actuator can operate in fail-safe close, fail-safe open and double acting modes depending on the solenoid valve used to control it.

    Datasheet Pneumatic Actuator PA 11 / 21

    Advantages
    - Robust PP-GF housing
    - Full plastic actuator
    - Position indicator with integrated NAMUR interface
    - Fast cycle times
    - Multi functional modul with different limit switch types
    optional available

    Combinations
    PA 11 with 2- Way Ball Valve Type 546 from d16DN10 to d32DN25
    PA 21 with 2- Way Ball Valve Type 546 from d40DN32 to d63DN50
    Nominal torque Mdn
    Housing materials
    10 Nm (7.4 lb. ft.)
    PP fiberglass-reinforced, highly chemical resistant
    Connectors
    Peak torque
    20 Nm (15 lb. ft.)
    PA11: F04
    Actuator connection
    PA21: F05
    G1/8"
    Weight
    0.75 kg - 1.445 kg
    Control time
    1 - 2 s, with throttle valve 5 s
    Control volume in dm
    DN
    Mode of operation
    Single acting
    Double acting
    Fail-safe close (FC)
    mm
    (FC/FO) dm
    (DA) dm
    Fail-safe open (FO)
    10
    Double acting (DA)
    0.18 (open)
    15
    0.15
    (closed)
    Working principle
    PA11
    0.15
    Rack and pinion
    20
    25
    Temperature control medium
    Max. 40 C
    32
    0.35 (open)
    40
    PA21
    0.28
    Ambient temperature
    0.28 (closed)
    -10 bis +50 C
    50
    Control medium
    Accessories
    Neutral, non aggressive gases
    3/2-Way pilot solenoid valve PV94/95
    (Control with fluids on request)
    3/2 and 5/2-way pilot solenoid valve MNL532
    Compressed air class per ISO 8573-1
    4/2-way solenoid valve 5470
    2 or 3 at -10 C
    Namur connector plate
    3 or 4 at T > 0 C
    Pilot valve cluster PV2000
    Allowable humidity
    Electropneumatic positioner DSR500-3
    0 - 100 %
    Limit switch box for feedback
    Max. allowable control pressure
    AS-Interface connections
    7 bar
    Emergency manual override
    Position indicator
    Optical integrated

    Combinations
    Pneumatic actuated Ball Valves Type 230-235
    Ball valves type 230 - 235 are based on manual ball valve type 546 d16DN10 to d63DN50 and
    pneumatic actuator PA11 (DN10-DN25) or PA21 (DN32-DN50).
    Ball Valve
    Pneumatic
    Type 230
    Type 231
    Type 232
    Type 233
    Type 234
    Type 235

    Pneumatic
    Actuator
    PA 11 / PA21
    PA 11 / PA21
    PA 11 / PA21
    PA 11 / PA21
    PA 11 / PA21
    PA 11 / PA21

    Manual Ball
    Valve
    Type 546
    Type 546
    Type 546
    Type 546
    Type 546
    Type 546

    Dimensions

    DN 10 - DN 50
    DN 10 - DN 50
    DN 10 - DN 50
    DN 10 - DN 50
    DN 10 - DN 50
    DN 10 - DN 50

    Materials

    Standards

    PVC-U, PVC-C, ABS,


    PP-H
    PVDF
    PVC-U, PVC-C,
    PVC-U, ABS,
    PVC-U, PVC-C, PP-H,
    PVDF

    ISO/DIN
    all standards
    all standards
    ASTM/ANSI
    BS
    JIS

    Ball valves type 285 - 288 are based on ball valve type 543 d16DN10 to d63DN50 and
    pneumatic actuator PA21. The type range 285-288 is designed as modular upgradeable
    3-Way ball valve for mixing and diverting applications which demand special process
    requirements.
    Ball Valve
    Pneumatic

    Pneumatic
    Actuator

    Type 285

    PA 11 / PA 21

    Type 286

    PA 11 / PA 21

    Type 287

    PA 11 / PA 21

    Type 288

    PA 11 / PA 21

    Manual Ball
    Valve
    Type 543
    horizontal
    Type 543
    horizontal
    Type 543
    horizontal
    Type 543
    vertical

    Dimensions

    Materials

    Standards

    DN 10-DN 50

    PVC-U,
    PVC-C,
    ABS

    all standards

    DN 10-DN 50

    PROGEF

    DIN/ISO, ASTM

    DN 10-DN 50

    SYGEF

    DIN/ISO, ASTM

    DN 10-DN 50

    PVC-U,
    ABS

    DIN/ISO, JIS

    Exploded view
    1. Spring cover
    2. Optical position indicator
    3. Housing of PP-GF
    4. Piston with rack

    5. Pinion shaft
    6. Preloaded spring assembly
    7. Connection for control air G1/8

    Dimensions

    PA11
    PA21

    L1
    mm
    194
    224

    L2
    mm
    44
    55

    L3
    mm
    80
    80

    L4
    mm
    24
    24

    L5
    mm
    48
    58.5

    L6
    mm
    54
    58

    L7
    mm
    275
    305

    H1
    mm
    97
    119

    H2
    mm
    20
    20

    H3
    mm
    4
    4

    H4
    mm
    40
    51

    D1
    mm
    29
    29

    D2
    mm
    M5
    M5

    D3
    mm
    61
    82

    D4
    mm
    74
    94

    D5
    G1/8"
    G1/8"

    D6
    mm
    35
    35

    torque characteristics
    PA 11

    PA 21

    Operating Diagram FC, FO, DA

    Fail safe to close (FC) with 3/2-Way Solenoid


    Valve de-energized closed

    Double acting (DA) with 5/2-Way Solenoid Valve

    Fail safe to open (FO) with 3/2-Way Solenoid


    Valve de-energized closed

    Double acting (DA) with 4/2-Way Solenoid Valve

    Planning Fundamentals
    The following link will lead you to the Georg Fischer Planning Fundamentals. These detailed documents will
    support you by choosing the right valve for your application.
    http://www.gfps.com/content/gfps/com/en/support_and_services/planning_assistance/planning_fundamentals.html?lang=en

    You might also like