Scribd Logo
Upload

Welcome to Scribd!

  • 156 views

    Senior Engineer Oil Gas in Houston TX Resume Morris Narunsky

    Uploaded by

    MorrisNarunsky2
    This document provides a summary of Morris J Narunsky's qualifications and experience. It includes his contact information, education, affiliations, and over 30 years of experience in subsea and offshore engineering roles. His experience includes positions at Cameron, National Oilwell Varco, Expro, Technip Offshore, Cameron Controls, Oil States HydroTech, Baker Oil Tools, and Foster Valve Corporation where he was involved in the design, analysis and improvement of subsea production systems, drilling equipment, valves, and safety systems.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Senior Engineer Oil Gas in Houston TX Resume Morris Narunsky

    Uploaded by

    MorrisNarunsky2
    156 views4 pages
    This document provides a summary of Morris J Narunsky's qualifications and experience. It includes his contact information, education, affiliations, and over 30 years of experience in subsea and offshore engineering roles. His experience includes positions at Cameron, National Oilwell Varco, Expro, Technip Offshore, Cameron Controls, Oil States HydroTech, Baker Oil Tools, and Foster Valve Corporation where he was involved in the design, analysis and improvement of subsea production systems, drilling equipment, valves, and safety systems.

    Original Description:

    Morris Narunsky is an experienced Subsea Engineer.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a summary of Morris J Narunsky's qualifications and experience. It includes his contact information, education, affiliations, and over 30 years of experience in subsea and offshore engineering roles. His experience includes positions at Cameron, National Oilwell Varco, Expro, Technip Offshore, Cameron Controls, Oil States HydroTech, Baker Oil Tools, and Foster Valve Corporation where he was involved in the design, analysis and improvement of subsea production systems, drilling equipment, valves, and safety systems.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    156 views4 pages

    Senior Engineer Oil Gas in Houston TX Resume Morris Narunsky

    Uploaded by

    MorrisNarunsky2
    This document provides a summary of Morris J Narunsky's qualifications and experience. It includes his contact information, education, affiliations, and over 30 years of experience in subsea and offshore engineering roles. His experience includes positions at Cameron, National Oilwell Varco, Expro, Technip Offshore, Cameron Controls, Oil States HydroTech, Baker Oil Tools, and Foster Valve Corporation where he was involved in the design, analysis and improvement of subsea production systems, drilling equipment, valves, and safety systems.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4

    Morris J Narunsky

    Home (281) 272-2696


    Mobile (713) 385-0328
    [email protected]

    Houston, Texas 77088


    Position:

    Subsea Engineer

    Education:

    BS, Aerospace Engineering, The University of Texas at Arlington, TX, 1969


    Programmers Certificate, Academy of Computer Technology, Houston, TX, 1971
    United States Coast Guard Approved Personal Survival and Survival Suit/Survival
    Craft Course at Texas A&M University System Center for Marine Training and Safety
    at Galveston, July, 2000.

    Affiliations:

    American Society of Mechanical Engineers

    Former Membership Development Chair: South Texas Section

    Former Secretary / Treasurer: Petroleum Technical Chapter

    Society for Underwater Technology


    Experience:

    Over thirty years of oil and gas project engineering and product design background,
    have included 17 years of subsea and offshore experience, and extensive surface
    background. Duties have encompassed the design of drilling, production, pipeline and
    downhole products, as well as the evaluation of subsea systems, the verification of
    manufacturers products for functional suitability, meeting with customers, and formal
    specification writing. I am well versed in working within consulting, contracting and
    manufacturing environments, and have an excellent working knowledge of industry
    specifications and requirements, such as API, NACE and ASME.

    Cameron / OneSubsea 09/09 to 11/14


    Principal / Subsea Engineer
    Design and Development of 10K and 15K subsea SpoolTreesTM for oil and gas production, rated to 10,000
    ft water depth. Most were conversion Trees modified from original design, and tailored for customer
    specific requirements. I developed P&ID schematics and identified or specified all components for
    hydraulic and electrical control systems from customer SCM to Tree functions. My most recent Tree
    project was Marubeni Angus / Manatee, which drew high praise from customer. I also improved designs of
    Tree ancillary equipment, including Tubing Hangers, Tree Caps, Running & Retrieving Tools, etc.
    Technical writing of Tree Rig Books for operator offshore use, Factory Acceptance Test and Extended FAT
    procedures, Design Files, and other technical documents.
    Analysis of BP GoM SpoolTree for the installation and positioning of 5"-15K Framo subsea multiphase
    flowmeter and MARS (multiple application re-entry system) into the choke insert slot in Tree, and
    presentation to BP of best options.
    Engineering liaison for BPs containment response system, stored and tested in Houston.
    Investigated many field performance reports and developed solutions for numerous field issues.
    Successful design and prototype testing of Mechanical Internal Tree Cap Running Tool at the Cameron
    Technical Development Center.
    Training in AutoCAD and Inventor worked with both CAD programs.

    National Oilwell Varco 05/09 to 07/09


    Senior Design Engineer
    Standardization of 2" thru 4" Choke Valve Series product line, along with control systems and position
    indication.
    Expro 01/07 to 04/09
    Senior Development Engineer
    Design and Development of a state-of-art large bore drilling choke intended to help control surface and
    offshore drilling operations in a precise and instantaneous manner. The product includes a continuous duty
    electric motor actuator, and is an integral component of our sister company, Secure Drill, overall drilling
    control program. The specific product is a nominal API 7"-5000#, and is modular in the sense that it is
    adaptable from a 4" thru a 6" nominal flow bore by replacing only a handful of parts, which makes it
    unique. To date, the maximum size product (any manufacturer) suitable for the Secure Drill system has
    been 3". Our client, Trans Ocean, has conducted extensive System Integration Testing in their manifold,
    and is quite pleased with our product. The operating service provides high flow characteristics for severe
    corrosive service applications.

    Technip Offshore, Inc., 05/00 to 01/07


    Staff Specialist
    Followed several phases of the BP Holstein Truss Spar truss and soft tank fabrication at Gulf Marine
    Fabricators yard, to verify compliance with drawings and fitness for load-out and mating with hard tank.
    Audits of FMC Design Calculations for BP Thunder Horse manifold applications. Products include
    Actuators, large-bore Gate Valves, Connectors, and Pressure Caps for 6" 8" 10" and 12" pipeline
    terminations. Design parameters are up to 15,000 psi working pressure, 350F temperature, 10,000 ft
    water depth, and API Service Class 'HH.' Preparation of Audit Reports for client, and Corrective Action
    Requests for manufacturer.
    Analysis and/or engineering approval of BP Mad Dog Buoyancy Can Upper and Lower Stem equipment,
    including Spar Deck Stopper structure, heave guidance and hangoff devices, and 36"/40" Stem Connector
    interfaces. Issuance of detail drawings and procurement specifications for construction and assembly.
    Preparation of Functional Specification and Data Sheets for subsea flowline jumpers and PLETs for BP
    Thunder Horse manifolds interfaces; as well as working with BP, FMC, and installation team to review and
    recommend improvements to PLET and jumper designs.
    Work with inter-department, inter-company, and multi-discipline personnel to resolve system and equipment
    interface issues for BP Atlantis.
    Analyses of several subsea tie-in systems to Samedan Mari-B platform from subsea wells and to 30" export
    line. Conducted studies, including diver vs. diverless comparisons, to present customer with best
    installation options.
    Responsibility for expeditious delivery and specification compliance of subsea ball valves, check valves,
    piggable wyes, connectors and strakes for Boomvang/Nansen Banjo/Seahawk 16" & 18" Pipelines and 12"
    Risers. Products were installed and integral with infield manifold. Compilation of product documentation
    for Williams Pipeline and Technip Offshore Contractors.

    Evaluation of Cameron Subsea Trees and ancillary equipment for BP Amoco King Complex. Audit of
    Cameron Design Files and Documentation for monogrammed items of this project.

    Cameron Controls, 1999 to 2000


    Contract Engineer

    As a Mechanical Engineer in Camerons Support Group, I supported Project


    Managers in the design of multiplex control systems for subsea BOP stacks and diverters.

    Writing Technical Specifications such as Factory Acceptance Tests for specific


    units and following the testing through the shop with customers present

    Performing mechanical and hydraulic calculations for Job Design Books

    Writing Test Procedures for the environmental and hyperbaric testing of


    control system components for product improvement and verification.

    Oil States HydroTech, 1997 to 1999


    Product Design Engineer
    Designed equipment for the installation, modification, and repair of subsea pipelines, for up to 42 pipe.
    Equipment was installed on surface or subsea with diver and/or ROV intervention. Products included
    mechanical and structural connectors, swivel joints, pipe insulation joints, misaligning flanges, pressure
    balanced safety joints, hydrocouples, hydrotaps, pipe recovery tools and piggable Ys.

    Baker Oil Tools, 1991 to 1996


    Senior Development Engineer
    Principal engineer for the design of surface safety systems, as mandated by MMS for OCS oil and gas
    production. Worked in team based management environment, specifying and designing failsafe actuators
    and bonnets to interface with customer specified gate valves. Developed and conducted surface safety
    systems training program for BOT subsurface safety system facility in order to increase knowledge base of
    other engineers and designers.

    Foster Valve Corporation, 1987 to 1991


    Engineer
    Designed API surface wellheads, trees and ancillary equipment as well as gate valves for oil and gas use
    and for geothermal applications of up to 600F. Designed ANSI gate valves for pipeline applications. Set
    up Fosters test lab for API 6A, Appendix F testing and for SPPE verification testing.
    Contract Assignments, 1984 to 1987
    Vetco Gray: Designed subsea drilling, production, and workover products for Green Canyon 24-slot
    template.

    Brian Watt Associates: Designed 13 3/8 and 20 subsea tie-back systems for existing mudline suspension
    wellheads located in offshore Netherlands, meeting 3-month deadline from concept to delivery of
    manufactured products.
    Subsea Ventures: Performed structural analyses of subsea Blowout Preventer Stacks for DNV
    certifications.
    Hughes Offshore, 1982 to 1983
    Designed and unitized subsea BOP stacks up to 18 15,000 psi working pressure. Standardized designs
    for 13 3/8 and 20 offshore diverters and for telescopic joints, reducing diverter component choices from
    40 to 5 for new orders.
    Koomey Inc., 1981 to 1982
    Designed skid-mounted control units for subsea and surface BOP stack and for offshore diverter
    operations.
    National Supply, 1979 to 1981
    Designed subsea oil and gas production systems. Products included trees, flowlines, flowline pull-ins,
    tubing hangers, multi-function tools, etc.
    FMC Corp, 1976 to 1977
    Designed API 6A subsea and surface gate valves and actuators. Designed 1 bore gate valve w/integral
    actuator for subsea controls. This product, rated to -75F and 18,000 psi working pressure, replaced bulky
    gate valve/actuator, and was featured in FMC catalog.
    Houston Systems Manufacturing Co. & Pyramid Manufacturing Co. 1970 to 1976
    Designed masts, derricks and substructures for land drilling rigs for up to 30,000 feet drilling depth.
    Unitized complete drilling rigs, including design of all mud, water, fuel and air systems and BOP control
    systems, and including functional structures for all power and control plants.

    You might also like