Grease Separators

Grease Separators
ACO Passavant draining, separating, pumping

Grease separators of polyethylene, stainless steel and
reinforced concrete
ACO passavant
Separators
Why have grease separators to be used?
Industries generating waste water have

to ensure with the aid of appropriate pretreatment installations that substances
and liquids spreading harmful and
noxious vapours and smells do not attack
building materials and drainage installations or interfere with operations and do
not penetrate the pipes. Grease separators pursuant to DIN 4040/DIN EN 1825
have to be set up in premises which are
exposed to the incidence of waste water
containing fats and oils in order to ensure
that the fats and oils of organic origin are
removed from the waste water. This
applies, for example, to kitchens and
meat processing plants. In order to protect the building, an active back pressure
stop has to be fitted. It follows that a lifting plant or prefabricated pumping sta-
tion has to be provided after every grease separator fitted below the backflow
level (normally road level)!
The individual requirements to be met by
trade and industry concerning the performance of grease separators, lifting
plants and prefabricated pumping stations call for adaptable products of different sizes and made of different materials. ACO Passavant have for decades
been supplying the most comprehensive
range of grease separators, lifting plants
and pumping stations for installation in
and above ground made from reinforced
concrete, stainless steel and polyethylene.
Reinforced concrete and polyethylene
have proved particularly suitable for
ground installation.
Grease separators pursuant to DIN 4040/DIN EN 1825 have to be set up

in premises exposed to the incidence of waste water containing fats.
Excerpt from DIN 1986-100, paragraph 6.2.2
Why have light mineral liquid separators to be used?
Light mineral liquid separators constitute

the proven problem solvers in the case of
minerally polluted waste water capable of
forming a flammable or explosive atmosphere. Light mineral liquid separators are
chiefly used at petrol stations, parking
spaces, wash installations, motor vehicle
workshops, mineral oil storage plants or
power stations. These installations have
to be such that no contaminated waste
water is able to emerge if there is a backflow or when the self-closing shutting
device (float) of the plant begins to operate.
When the European norm DIN EN 858

came into force, ACO Passavant completely revised their range of light mineral
liquid separators and set new standards
with the aid of innovative products. It is
now possible to adapt the separators to
users actual practical requirements, thus
considerably reducing investment and
operating costs.
You are able to obtain more information
by requesting our new light mineral liquid
separator brochure. Please get in touch
with [email protected].
If mineral oils or light mineral liquids, particularly those which are

flammable or capable of forming an explosive atmosphere, penetrate
the drainage network, separators for light mineral liquids have to be
provided after the drainage points.
Excerpt from DIN 1986-100, paragraph 6.2.3
ACO passavant
Separators
How you choose the correct separator
Waste water
Light mineral liquids
Animal and vegetable fats/oils
Dimensioning
Dimensioning pursuant to:
Dimensioning pursuant to:
Number of meals
per day or
Number and type of
equipment
Influence factors are:
Temperature of waste water
Density of grease
Use of cleaning agents
Dimensioning sheet under

www.aco-passavant.de
Tel. ++49 (0) 6620 77-0
Type of operating area

(petrol station, washing
area, workshop etc.)
Waste water quantity
(rain resp. waste water)
Number of cleaning devices
Influence factors are:
Type and density of medium
Sludge content (high/low)
Installation situation
Free-standing installation
Ground installation
Material polyethylene
ECO-MOBIL
ECO-JET
HYDROJET
Material polyethylene
ECO-FPI
Material stainless steel

COALISATOR -E
Material stainless steel

LIPU-MOBIL
LIPUREX
LIPURAT
LIPATOR
LIPATOMAT
Material reinforced concrete
Material cast iron

CURATOR -GG
COALISATOR-GG
LIPUMAX
LIPUMAX- Inliner
Ground installation
Material reinforced concrete
OLEOMAX
OLEOPATOR
CURATOR/COALISATOR
OLEOSAFE
OLEOPASS
Material cast iron

CURATOR -GG
COALISATOR -GG
1.
If static water level is below backflow level (normally road level), an "active backflow safety device" (lifting plant or pumping
station) has principally to be fitted.
2.
Caution in the case of ground installation: In order to avoid additional costs and unnecessary coordination expenditure,
we recommend separators which reach the mentioned static load without additional reinforcement expenditure (e. g.
load distribution plate) - for example OLEOMAX , OLEOPATOR or ECO-FPI.
3.
Caution in the case of free-standing installation of grease separators: in the case of temperatures in the separator of
> 60 or in the case of erection in areas exposed to fire hazards we recommend to use separators of material stainless steel.
Grease Separators
The principle
The disposal
A grease separator operates purely mechanically according to the gravity principle

(density difference), i. e. heavy substances
in the waste water precipitate and light substances, such as for example animal oils
and fats, rise to the surface of the water.
Sludge trap and separator have to be completely drained and cleaned at least once a
month, preferably, however, fortnightly.
Subsequent refilling of separator plants
has to be done with water (e.g. drinking
water, operation water, treated water from
grease separator plant), which corresponds to local inlet regulations.
Inspection window with grease layer
Grease storage capacity

min. 40 litres x NG
Grease surface 0.25 m2 x NG
Inlet
Outlet
Grease layer
Function scheme as per DIN EN 1825

grease separators without separation
between sludge trap and separator
Note:
Separator designs as per DIN 4040
(sludge trap/separator separate)
upon request!
Separation compartment
Imaginary sludge trap
Contents: 100 litres x NG;
Capacity of separation
with meat processing
compartment is a func-
plants:
tion of hydraulic check.
200 litres x NG
Application areas

Butcheries
Slaughterhouses (large establishments)
Meat and sausages production
Animal body utilization
Poulty slaughterhouses
Skin preparation plants

Hotels
Restaurants
Meal serving counters
Students refectories
Motorway service stations
Canteens

ACO passavant
Hospital kitchens
Canning factories
Edible oil refineries
Ready meal producers
Peanut roasting works
Grill, frying and deep-frying kitches
Chips and crisp productions
Grease Separators
The materials
POLYETHYLENE
V4A STAINLESS STEEL (1.4571)

no fire load
high temperature resistance
superior optics
hygienic material
absolute ultra-violet resistance
mechanical strength
resistant to organic solvents

easy handling
low heat transmission
high resistance to chemical effects
disposal-friendly surface (wax-like)
easy subsequent processing in situ
REINFORCED CONCRETE
statically and dynamically permanently

highly loadable (SLW 60)
max. dimensional stability inwards and
outwards
mainly any installation depth
The range
POLYETHYLENE
mobile Ground inst.
V4A STAINLESS STEEL (1.4571)
ECO-FPI
LIPU-MOBIL
ECO-MOBIL
REINFORCED CONCRETE
LIPUMAX
LIPUMAX-Inliner
Extension stage 1
Standard design
LIPUREX-O/R
ECO-JET-O/R/G
Extension stage 2
with direct suction
LIPUREX-OD/RD
ECO-JET-OD/RD/GD
Extension stage 3
with direct suction, disposal pump optionally, high-pressure internal cleaning
and manual control
LIPURAT-OS/RS
LIPURAT-OSE/RSE
HYDROJET-OS/RS
HYDROJET-OSE/RSE
Extension stage 4
with direct suction, disposal pump optionally, high-pressure internal cleaning
and automatic control
LIPURAT-OA/RA
LIPURAT-OAE/RAE
HYDROJET-OA/RA
HYDROJET-OAE/RAE
Legend:
-O = oval shape
-R = round shape
-G = separated chambers
-D plus direct suction
-S plus high-pressure cleaning
with manual operation
-A plus high-pressure cleaning
with automatic control
-E plus disposal pump
Grease Separators
Separator shapes in free-standing installation

ACO Passavant are able to supply the
appropriate separator for all installation
situations. For example, grease separators of an oval, circular and partitioned
structure are available. In the case of
extreme construction conditions, such as

narrow staircases or through lift shafts,
we are also able to deliver and weld in
situ the grease separator in the form of
individual components.
oval shape
suitable for standard door measurements:
Separators of V4A, stainless steel
NG 1-4: max. width 700 mm
e. g. ECO-JET-O/OD
Separators of polyethylene
round shape
dismountable into individual segments

for example, to be recommended in
the case of right-angled access roads
The nominal size can be adapted in situ
by exchanging the centre segments
(e.g. from NG 7 to NG 10)
e. g. LIPURAT-RS/RA
Number of segments:
NG 2- 4: 2 segments, 1000 mm
NG 7-10: 3 segments, 1500 mm
NG 15-20: 3 segments, 1750 mm
separated chambers
particularly suitable for reconditioning

in the presence of narrow access openings
dismountable into 3 segments
e. g. ECO-JET-G/GD
max. segment dimensions (LxWxH):

NG 2: 620 x 700 x 1360 mm
NG 4: 1050 x 700 x 1360 mm
In situ welding
for extreme installation situations (narrow staircases, lift shafts)

Grease separator is supplied in individual components, mounted and
checked for density in situ
e. g. HYDROJET
Grease Separators
Lifting plants/pumping stations for grease separators

Separator plants for fats, the static water level of which
lies below the backflow level (refer to EN 752-1), have to
be drained via a following lifting plant.
Excerpt from DIN EN 1825-2, paragraph 7.3
Backflow level
4
Technology plus
system guarantee
Functional reliability in combination:
ACO Passavant offer the Technology plus system guarantee
regarding the coordination and
functional reliability of the components separator and lifting
plant/pumping station. More information can be obtained by telephoning ++49 (0) 6620 77-0
1
2
1
2
3
4
Grease separator plant

Lifting plant
Ventilation pipe
Backflow loop
Lifting plants
MULI -PE duo
Installation purpose
recommendable for installation behind grease separators
NG 1-4
Product advantages
3 different inlet connection possibilities
maintenance-friendly polyethylene container
modular system adapted to local installation situations
(e. g. delivery head)
robust and silent fittings
MULI-PE duo
MULI -PRO PE duo

MULI -PRO VA duo
NG 7-20
Product advantages
4 different inlet connection possibilities
high-quality container of stainless steel 1.4571 resp. polyethylene
modular system adapted to local installation situations
(e. g. delivery head)
optimum room positioning possible
MULI-PRO PE duo
MULI-PRO VA duo
Pumping stations
MULI -MAX
PSD-W-PE
Prefabricated reinforced concrete pumping
stations
NG 1- 50
Product advantages
available in materials polyethylene and reinforced concrete
polyethylene container is permanently resistant to aggressive waste waters
reinforced concrete containers have a high stability in the
case of larger installation depths
available in load classes A 15, B 125, D 400
MULI-MAX
PSD-W-PE
Prefabricated reinforced concrete

pumping stations
Grease Separators
ACO Passavant grease separators for free-standing installation
Model range
Extension stage
ECO-JET-O
1
ECO-JET-OD
4
ECO-JET-R
1
Oval
Shape
Without
direct suction
Design
P O LY E T H Y L E N E
Product
advantages
Nominal size
1
2
3
4
7*
10 *
ECO-JET-RD
4
ECO-JET-G
4
Round
With direct
suction DN 65
Without
direct suction
ECO-JET-GD
4
Separated chambers
With direct
suction DN 65
Inspection window optional

Filling device optional

Compact design
Transport- and
assembly-friendly
Segment design
Transport- and
assembly-friendly
Without
direct suction
With direct
suction DN 50

Flleinheit optional
Low weight
Easy handling
thanks to 3-part design
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
Art. no.
0159.00.60
0159.00.61
0159.00.62
0159.00.63
0175.01.42
0175.01.56
0159.15.19
0159.34.80
0159.34.88
0159.34.90
0175.01.55
0175.01.63
3502.22.30
3504.22.30
3507.22.30
3510.22.30
3502.52.30
3504.52.30
3507.52.30
3510.52.30
3802.00.00
3804.00.00
3802.50.00
3804.50.00
Nominal sizes 15, 20 and larger upon request
*integrated sampling device
Model range
Extension stage
LIPUREX-O
1
LIPUREX-R
1
Oval
Shape
V 4 A S TA I N L E S S S T E E L
LIPUREX-OD
Without
direct suction
Design
Nominal size
1
2
3
4
7*
10 *
General dimensional drawing
(drawing for table of page 11)
Round
With direct
suction DN 65

Product
advantages
LIPUREX-RD
Compact design
Without
direct suction
With direct
suction DN 65

Segment design
Art. no.
Art. no.
Art. no.
Art. no.
7551.22.00
7552.22.00
7553.22.00
7554.22.00
7557.22.00
7560.22.00
7551.52.00
7552.52.00
7553.52.00
7554.52.00
7557.52.00
7560.52.00
7502.22.00
7504.22.00
7507.22.00
7510.22.00
7502.52.00
7504.52.00
7507.52.00
7510.52.00
Nominal sizes 15, 20 and larger upon request
*integrated sampling device
HYDROJET-OS
1
HYDROJET-OA
HYDROJET-RS
1
Oval
HYDROJET-RA
HYDROJET-OSE HYDROJET-OAE
1
Round
Manual
control
Automatic
control
Manual
control
HYDROJET-RSE HYDROJET-RAE
1
Round
Oval
Automatic
control
Manual
control
Manual
control
Automatic
control
Auromatic
control
Remote control optional

(-OA design only)

(-RA design only)
With disposal pump

Remote control opt. (-OAE design only)
With disposal pump

Remote control opt. (-RAE design only)
High-pressure inner cleaning

Segment design

Disposal pump

Disposal pump
Segment design
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
Art. no.
right left
3571.72.41/31
3572.72.41/31
3573.72.41/31
3574.72.41/31
3577.72.41/31
3580.72.41/31
3551.72.42/32
3552.72.42/32
3553.72.42/32
3554.72.42/32
3557.72.42/32
3560.72.42/32
3502.72.41/31
3504.72.41/31
3507.72.41/31
3510.72.41/31
3502.72.42/32
3504.72.42/32
3507.72,42/32
3510.72.42/32
3571.82.41/31
3572.82.41/31
3573.82.41/31
3574.82.41/31
3577.82.41/31
3580.82.41/31
3571.82.42/32
3572.82.42/32
3573.82.42/32
3574.82.42/32
3577.82.42/32
3580.82.42/32
3502.72.81/71
3504.72.81/71
3507.72.81/71
3510.72.81/71
3502.72.82/72
3504.72.82/72
3507.72.82/72
3510.72.82/72
LIPURAT-OS
LIPURAT-OA
LIPURAT-RS
LIPURAT-RA
LIPURAT-OSE
1
Round
Oval
Manual
control
Automatic
control
Manual
control
LIPURAT-OAE
LIPURAT-RSE
1
Manual
control
Oval
Oval
Automatic
control
LIPURAT-RAE
Automatic
control
Manual
control
Automatic
control

(-OA design only)

(-RA design only)
With disposal pump

Remote control opt. (-OAE design only)
With disposal pump

Remote control opt. (-RAE design only)

Segment design

Disposal pump
High-pressure inner cleaning,

disposal pump, segment design
Art. no.
right left
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
Art. no.
right/left
7571.72.41/31
7572.72.41/31
7573.72.41/31
7574.72.41/31
7577.72.41/31
7580.72.41/31
7551.72.42/32
7552.72.42/32
7553.72.42/32
7554.72.42/32
7557.72.42/32
7560.72.42/32
7502.72.41/31
7504.72.41/31
7507.72.41/31
7510.72.41/31
7502.72.42/32
7504.72.42/32
7507.72.42/32
7510.72.42/32
7571.82.41/31
7572.82.41/31
7573.82.41/31
7574.82.41/31
7577.82.41/31
7580.82.41/31
7571.82.42/32
7572.82.42/32
7573.82.42/32
7574.82.42/32
7577.82.42/32
7580.82.42/32
7502.72.61/51
7504.72.61/51
7507.72.61/51
7510.72.61/51
7502.72.62/52
7504.72.62/52
7507.72.62/52
7510.72.62/52
Grease Separators
The ACO Passavant extension stages
ECO-Mobil
It is easy to select the appropriate technical design with the aid of the extension stage system.
This is illustrated here by the example of a
stainless steel grease separator of oval
shape (free-standing installation, full disposal of sludge, grease and water).
Extension stage 1
Standard design
Particularly suited for carnival

marquees, snack bars
e. g. LIPUREX-O
Art. no.
Extension stage 2
With direct disposal
only in NG 0.3
3700.01.00
e. g. LIPUREX-OD
Option:
Disposal pump
Extension stage 3
With direct disposal,
disposal pump
optionally, high-pressure
inner cleaning and
manual control
LIPU-Mobil
e. g. LIPURAT-OSE
e. g. LIPURAT-OS
Option:
Disposal pump
Extension stage 4
With direct disposal,
disposal pump
optionally, high-pressure
inner cleaning and
automatic control
Particularly suited for carnival

marquees, snack bars
Art. no.
e. g. LIPURAT-OAE
only in NG 0.3
7301.30.40
e. g. LIPURAT-OA
10
Grease Separators
NG
0,3
1
2
3
4
7
10
ECO-JET-R
2
4
7
10
ECO-JET-RD
2
4
7
10
ECO-JET-G/-GD
2
4
HYDROJET-OS/-OA
1
2
3
4
7
10
HYDROJET-RS/-RA
2
4
7
10
HYDROJET-OSE/-OAE
1
2
3
4
7
10
HYDROJET-RSE/-RAE
2
4
7
10
ECO-Mobil
ECO-JET-O/-OD
LIPU-Mobil
LIPUREX-O/-OD
LIPUREX-R
LIPUREX-RD
LIPURAT-OS/-OA
LIPURAT-RS/-RA
LIPURAT-OSE/-OAE
LIPURAT-OSE/-OAE
0,3
1
2
3
4
7
10
2
4
7
10
2
4
7
10
1
2
3
4
7
10
2
4
7
10
1
2
3
4
7
10
2
4
7
10
H1
(mm)
280
930
880
1010
1010
1210
1392
885
1155
1175
1345
975
1240
1430
1600
1000
1000
930
880
1010
1010
1210
1392
975
1240
1430
1600
1095
1040
1165
1190
1390
1560
975
1240
1430
1600
H2
(mm)
250
860
810
940
940
1110
1292
785
1055
1075
1245
875
1140
1330
1500
930
930
830
780
910
910
1110
1292
875
1140
1330
1500
995
940
1095
1090
1290
1460
875
1140
1330
1500
HT
(mm)
485
1215
1215
1215
1300
1825
1825
1245
1515
1545
1785
1325
1595
1835
2005
1200
1200
1485
1485
1565
1565
1880
2055
1490
1760
2000
2170
1655
1600
1720
1745
2050
2220
1490
1760
2000
2170
LxW
(mm)
475 x 385
1135 x 750
1540 x 750
1540 x 750
1850 x 780
2370 x 920
2370 x 920
1000 x 1000
1000 x 1000
1500 x 1500
1500 x 1500
1000 x 1000
1000 x 1000
1500 x 1500
1500 x 1500
1200 x 700
2000 x 700
1085 x 670
1490 x 670
1490 x 670
1800 x 730
2370 x 920
2370 x 920
1000 x 1000
1000 x 1000
1500 x 1500
1500 x 1500
1520 x 720
1930 x 720
1930 x 720
2240 x 790
2820 x 930
2820 x 930
1000 x 1000
1000 x 1000
1500 x 1500
1500 x 1500
LG
(mm)
585
1235
1640
1640
1950
2615
2615
1200
1200
1700
1700
1200
1200
1700
1700
1360
2160
1235
1640
1640
1950
2615
2615
1200
1200
1700
1700
1520
1930
1930
2240
2820
2820
1612
1612
2112
2112
280
930
880
1005
1005
1210
1392
885
1155
1175
1345
975
1240
1430
1600
930
880
1005
1005
1210
1392
975
1240
1430
1600
1095
1040
1165
1190
1390
1560
975
1240
1430
1600
250
830
780
905
905
1110
1292
785
1055
1075
1245
875
1140
1330
1500
830
780
905
905
1110
1292
875
1140
1330
1500
995
940
1065
1090
1290
1460
875
1140
1330
1500
430
1160
1160
1160
1470
1603
1705
1245
1515
1545
1785
1325
1595
1835
2005
1460
1410
1690
1720
1810
2010
1490
1760
2000
2170
1655
1600
1720
1745
2050
2220
1490
1760
2000
2170
475 x 385
1030 x 620
1440 x 620
1440 x 620
1750 x 680
2280 x 830
2280 x 830
1000 x 1000
1000 x 1000
1500 x 1500
1500 x 1500
1000 x 1000
1000 x 1000
1500 x 1500
1500 x 1500
1030 x 620
1440 x 620
1440 x 620
1750 x 680
2280 x 830
2280 x 830
1000 x 1000
1000 x 1000
1500 x 1500
1500 x 1500
1572 x 620
1980 x 620
1980 x 620
2292 x 680
2922 x 830
2922 x 830
1000 x 1000
1000 x 1000
1500 x 1500
1500 x 1500
585
1230
1640
1640
1950
2580
2580
1200
1200
1700
1700
1200
1200
1700
1700
1230
1640
1640
1950
2580
2580
1200
1200
1700
1700
1572
1980
1980
2292
2922
2922
1612
1612
2112
2112
Weight
Weight
empty (kgs) filled (kgs)
9,75
42
45
497
65
685
65
785
75
1050
170
2042
170
2342
130
844
190
1105
250
2202
290
2537
130
844
190
1105
250
2202
290
2537
75
555
115
995
140
592
155
775
165
885
175
1150
275
2147
275
2447
130
844
190
1105
250
2202
290
2537
143
595
213
833
240
960
267
1242
425
2297
454
2626
130
844
190
1105
250
2202
290
2537
20
143
213
240
267
425
454
130
190
250
290
130
190
250
290
143
213
240
267
425
454
130
190
250
290
135
185
200
215
418
449
130
190
250
290
52
595
833
960
1242
2297
2626
844
1105
2202
2537
844
1105
2202
2537
595
833
960
1242
2297
2626
844
1105
2202
2537
587
805
920
1190
2290
2621
844
1105
2202
2537
For description of dimensions see drawing page 8*, DN 100 - outer- 110 mm, DN 150 - outer- 160 mm, DN 200 - outer- 210 mm
DN*
50
100
100
100
100
150
150
100
100
150
150
100
100
150
150
100
100
100
100
100
100
150
150
100
100
150
150
100
100
100
100
150
150
100
100
150
150
50
100
100
100
100
150
150
100
100
150
150
100
100
150
150
100
100
100
100
150
150
100
100
150
150
100
100
100
100
150
150
100
100
150
150
11
Grease Separators
ACO Passavant PE-HD grease separators for ground installation
e
D greas
rst PE-H
n
The fi
io
t
a
ll
I
a
d inst
ECO-FP
60
r groun
W
fo
L
r
S
o
r
t
a
fo
separ
esting
-t
e
sures
p
a
y
e
t
atic
crete m
n
o
c
with st
l
a
n
t additio
withou
ECO-FPI
Full disposal
Compact design
Model range
Disposal type
Shape
- space-saving thanks
to intelligent design
assembly-friendly
robust material
Product
advantages
The new grease separator

generation
With the new ACO Passavant PE-HD grease
separators for ground installation, ACO
Passavant introduce a grease separator
plant which combines costs and handling in
an optimum manner.
Convincing advantages:
Art. no.
Nominal size
Compact
1
2
3
4
7
10
Cl. B 125
Cl. D 400
Cl. B 125
Cl. D 400
Cl. B 125
Cl. D 400
Cl. B 125
Cl. D 400
Cl. B 125
Cl. D 400
Cl. B 125
Cl. D 400
3201.55.00
3201.55.01
3202.55.00
3202.55.01
3203.55.00
3203.55.01
3204.55.00
3204.55.01
3207.55.00
3207.55.01
3210.55.00
3210.55.01
Further designs (suction performance, double

sludge trap, high-pressure inner cleaning) upon
request!
Thanks to the design, sludge trap, grease

separator and integrated sampling are in
one housing, with same performance.
Loading capacity
The basic shaft of double-wall PE-HD has
got a loading capacity up to class SLW 60
(with cover D 400) without in-situ concrete measures.
Assembly-friendly
Unloading, displacing and aligning in the
building trench possible without heavy
load crane!
Resistance
Heaviest single component
NG 1- 4, 450 kgs
NG 7-10, 1070 kgs
PE (polyethylene) is robust, acid-resistant, corrosion-proof and thus mediaresistant from inside to grease acids and
from outside to aggressive waters and soil.
12
Cost savings during installation

No labour-intensive handling and no nonquantifiable costs thanks to the elimination
of all extensive concrete work in situ compared to existing polyethylene separators.
When compressing the soil, no need to fill
up with water.
Delivery of separator to site
Moving the base with the aid of the mini-excavator
Buoyancy-safe
The ECO-FPI is designed for a zero water
level up to max. 1 m above ground plate,
without additional measures.
Full loading capacity also during compression
ACO passavant
The integrated sampling device dispenses with a

separate sampling shaft, and thus also with excavation work.
Grease Separators
ACO Passavant reinforced concrete grease separators for ground installation
LIPUMAX
Full disposal
Compact design
Model range
Disposal type
REINFORCED CONCRETE
Shape
Product
advantages
- Inlet and outlet assembly of PE-HD

- up to NG 7, fitting without crane
- small disposal volume
2
4
7
10
15/20
25
- entire inliner of PE-HD

- wax-like surface
- up to NG 7, fitting without crane
Art. no.
Nominal size
1
LIPUMAX -Inliner
Full disposal
Compact design
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
8480.11.62
8490.11.62
8480.21.62
8490.21.62
8480.44.62
8490.44.62
8480.74.62
8490.74.62
8481.04.62
8491.04.62
8482.07.62
8492.07.62
8486.50.62
8496.50.62
Art. no.
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
Cl. D screwed
Cl. D loose
8480.11.63
8490.11.63
8480.21.63
8490.21.63
8480.44.63
8490.44.63
8480.74.63
8490.74.63
8481.04.63
8491.04.63
8482.07.63
8492.07.63
8486.50.63
8496.50.63
Further designs (cover class B 125, double sludge

trap etc.) upon request!
13
The advantages of LIPUMAX
Up to NG 7 fitting possible without crane
Easy assembly of inlet and outlet pipes at

separator
low purchase costs

high separating performance thanks to
open design
optimum accessibility in the case of
maintenance, cleaning and disposal
low space requirements
short installation and assembly period
easy assembly, few pipe and flexible
connections
various connection possibilities for inlet
and outlet
additional in the case of

LIPUMAX-Inliner
PE-HD inliner
- guarantees superior resistance to
grease acids
- offers higher protection against mechanical damage
Optimum accessibility in the case of maintenance, cleaning and disposal
The PE-HD inliner guarantees superior resistance
Grease Separators
Lifting plants for installation behind grease separators
For safety reasons, ACO Passavant supply all waste water lifting
plants, intended for installation behind a separator, with air bubble
injection!
Air bubble injection

MULI-PRO-VA
Model range
Product
advantages
Suitable for grease

separators
Delivery head
from... to...
Effective tank ca-
- up to 4 different inlet connection

possibilities
- higher operating safety by
air bubble injection
- modular system
Pressure tube 2
NG 7 - 10
Pressure tube1
MULI-PRO-VA 1.1 a. 2.1

3-7 m
4-9 m
6-12 m
6-15 m
pacity from... to ...
MULI-PRO-VA 1.1 a. 1.4 122 litres

MULI-PRO-VA 2.1 a. 2.4 220 litres
Space requirement
1.60 x 1.40 m (LxW)
Design
(included in scope
of supply)
Alarm
Level measuring
DUO-Anlage
Design
Collecting tank of V4A stainless steel,

pumps, bifurcated pipe, nonreturn
flap, switchbox, signalling unit,
2-circle protective switch
with air bubble injection
Note: further designs upon request!
Injected air
Operating method of air bubble injection

Air is continuously being injected into the pressure tube with the aid of
a compressor. The air bubbles rising at the end of the pressure tube
ensure a constant movement below the pressure tube, thus preventing
any floating substance forming media (e. g. residual grease from the
separator) from depositing. This ensures an extremely reliable level
measurement.
14
MULI-PRO-PE
Model range
DUO plant
Design
DUO plant
- 4 different inlet connection

possibilities
- combinable as parallel plant
- 3 different inlet connection

possibilities
- modular system
Suitable for grease

separators
NG 7 - 20
NG 1 - 4
Delivery head
from... to...
MULI-PRO-PE V-15 up to 40 3-15 m

MULI-PRO-PE K-15 up to 75 3-18 m
MULI-PE duo
MULI-PE/1 duo
MULI-PE/2 duo
MULI-PE/3 duo
Inlet height 600 mm

Inlet height 750 mm
Inlet height 800 mm
or from above
Inlet height 250 mm

Inlet height 400 mm
or from above
Product
advantages
MULI-PE duo
Effective tank capacity from ...to ...
Space requirement
Design
(included in scope
of supply)
Single plant
Parallel plant
240 litres
310 litres
80 litres
100 litres
335 litres
2.10 x 1.40 m (LxW)

2.10 x 2.40 m (LxW)
Collecting tank of polyethylene,

2-circle protective switch
with air bubble injection
2-5 m
8-12 m
8-16 m
8-18 m
1.50 x 1.50 (LxW)

Collecting tank of polyethylene,
Grease Separators
Pumping stations for installation behind grease separators
ACO Passavant prefabricated
pumping stations can be supplied
together with the following series of
submersible pumps
Model range
Prefabricated pumping station

DUO plant
Design
REINFORCED CONCRETE
Product
advantages
SAT
For slightly to strongly polluted water
free of faeces. Maximum delivery
medium temperature: 40C, up to
80C for short periods.
The submersible pump SAT is used in
the industrial, municipal and private
sectors to lower the ground water, in
seepage shafts, to convey rainwater
and for surface drainage. It prevents
overflow in the case of rain and serves
as back pressure stop in the case of
floods. In the presence of a fixed
installation, the pressure pipe has to
be fitted with an approved back pressure stop and has to be taken over the
backflow level.
- plant completely pre-mounted

at works
- flexible installation height
- flexible connection possibilities
- high stability with large install. depths
- large effective volume
Suitable for
grease separators
NG 1-50
Cover/
load class
Class B 125
Class D 400
Class F 900
Pump series
SAT for waste water free of faeces

SITA for waste water with faeces
KL-AT for waste water with faeces
Total inst. depth

from ... to ...
2130 - 6000 mm
Shaft diameter
from ... to ...
1000 - 2500 mm
Buoyancy
safety
upon request
SITA (ex)
For strongly polluted waste water,
with and without faeces. The cutting
device prevents an obstruction of the
pump in the presence of a high proportion of solid and fibrous substances in the waste water and effluent.
Max. media temperature: 40C. Submerged motor up to 65C for short
periods. The SITA submersible motor
pump with cutting mechanism which is
capable of making 69,600 cuts per
minute is a high performance pump
for the cost-effective disposal of
strongly polluted effluents in the industrial, municipal and private sectors.
Model range
Design
PSD-W-PE
DUO plant
DUO plant
- buoyancy-safe PE container
- deposit-free buoyancy-safe
collecting chamber
- nearly maintenance-free and versatile pressure tube switch
- resistant to aggressive waste waters

- easy installation thanks to compact
design (double-wall winding pipe)
- optimum strength despite low weight
with class D 400
Suitable for
grease separators
NG 1-4
NG 1-10
Cover/
load class
Class A 15
Class A 15
Class B 125
Class D 400
Pump series
Product
advantages
MULI-MAX



Total inst. depth

from ... to ...
1290 - 2900 mm
Class B 1825 - 4000 mm

Class D 1860 - 3000 mm
Shaft diameter
from ... to ...
856 mm
1000 - 1500 mm
Buoyancy
safety
buoyancy-safe 1 m above ground plate

without additional concrete measures
buoyancy-safe 1 m above ground plate

without additional concrete measures
KL-AT-M, KL-AT-V
For the conveyance of clean and used
water, waste water containing solid
and fibrous matter and sludge, as well
as in the ex protected finish for faeces in the industrial, municipal and private sectors.
The submersible pumps for prefabricated

pumping stations: 1. SITA, 2. SAT, 3. KL-AT
15
Fresh Grease Separators
Partial disposal
Principles and function
This type of grease separators is mainly
used in restaurant kitchens, canteens and
catering trades
.
The grease accumulates in the upper
cone, the sludge drops to the lower cone.
Fields of application
The grease is maintained liquid by heating the upper cone.

Depending on grease and sludge incidence, filling into the collecting tanks can
be performed.
on ships
in the case of difficult access for
disposal vehicles
in conjunction with wet refuse disposal
installations
Flow chart
Inlet
Outlet
Grease
Sediments
Manual operation
LIPATORfresh grease separator of stainless steel 1.4301 NG 2, 4, 7, 10, 15 with
integrated sludge trap as per DIN 4040,
DIN EN 1825 for free-standing installation in
frostproof rooms with LGA1) test certificate
and DIBt2) approval no. Z-54.6-163.
16
Automatic control
LIPATOMATfresh grease separator of
stainless steel 1.4301 NG 2, 4, 7, 10, 15
with integrated sludge trap according to
DIN 4040, DIN EN 1825 and programme
control, for free-standing installation in
frostproof rooms with LGA1) test certificate
and DIBt2) approval no. Z-54.6-163.
1) State factory inspectory

2) German Institute for Structural Engineering
ACO passavant
Product advantages
90 % of the total capacity need not be
disposed, which leads to significant
reduction of disposal costs as well as
fresh water consumption
No grease deposits thanks to short stay
in separator
Disposal without operation breaks and
without suction vehicle
Equipment
Electrical heating at upper cone (230 V,
50 Hz, 800 W)
2 collecting tanks, each 60 l, cover incl.
hose connection plus 2 spare tanks of
each 60 l
Inlet/outlet DN ... for SML (hubless) connection, as per DIN 19522
Agitating device with 1-phase AC motor
in housing bottom (230 V, 50 Hz, 16 W)
Grease and sludge extraction, each with
ball valves DN 60 (with LIPATOMAT,
electrically controlled), visual control
and flexible hose.
Process Technology
ACO Passavant process technology - high performance technology

Application
Biological waste water treatment is a particularly environment-friendly application
system. The considerable quantities of
oils and fats of organic origin from kitchens and the food processing industry
as well as the cosmetic industry carried
by waste water call, in accordance with
the regulations in force, for the use of a
separation plant. Solid and liquid organic
oils and fats are removed from the waste
water in the separator exclusively by force of gravity. However, only the freely
separable oils and fats as well as suspended matter are normally retained. Emulsified and soluble components in the waste
water pass through the separator almost
unimpeded. This is bound to lead to
exceeding the limit value of the lipophilic
substance parameter. As in many cities
(Frankfurt, Munich, ...), the authorities
focus on lipophilic substance parameter,
the use of furthergoing cleaning stages
behind a separator plant is required.
Thanks to ACO Passavants newly developed and often used high performance
biology, the actual values fall permanently short of the maximum values governing
the addition of lipophilic substances. Furthermore, following values can be reduced thanks to the high performance biology: COD, pH-value, BOD5, settling substances.
Function
In the case of high performance biology
developed by ACO Passavant, the bioreactor is laid out as tower biology. This
considerably reduces the space required
when compared to a standard submerged body or fixed bed biology. After
having passed through the grease separator, the pretreated waste water is buffered in an intermediate tank and is taken
from there fully automatically (controlled
by level measurement) to the biological
phase. The substances still present in the
waste water are processed in the area
of the bio-reactor with the aid of specially
adapted micro-organisms. The oxygen
required by the micro-organisms is added
with the aid of the most modern diaphragm technology. The central feature
of the bio-reactor is the arrangement of
the carrier material. The decisive advantage presented by the carrier material is
the large surface used as growth area for
the specially adapted micro-organisms.
Part of the waste water as well as
suspended and residual matter are continuously recycled to the intermediate tank
in order to be subjected once again to
the degradation process in the bio-reactor, thus increasing the performance of
the plant. The treated waste water is then
taken to the drains. There is also a possibility to take the waste water before reaching the drains through a filter, and thus
to separate the still remaining solids.
Practice
The organic load carried by waste water
differs according to the type of kitchen:
restaurants, refectories, canteens, hospitals, ... Thanks to our experience of treating waste water containing fats, we
design the high performance biology duly
allowing for the various origins. Before
operating the plant, we inoculage in a
unique manner the ideal type and quantity
of micro-organisms in the bio-reactor. The
plant then merely requires energy to operate the pumps and ventilation technique.
The use of chemicals is completely
dispensed with. Follow-up costs can thus
almost be avoided.
Note: If you have any questions on
process technology or on furthergoing waste water treatment, please
contact us by
telephone ++49 (0) 6620 77-705
or fax ++49 (0) 6620 77-52.
High performance biology
Process chart
Ventilation
Sludge recycling
Ventilation
High-pressure cleaning
Storage container
Pressure pipe to sewers
Inlet
Sampling
Grease separator plant

LIPURAT-RA
Storage container
Outlet
to
sewers
High performance
biology
Filter unit
Grease Separators
Hints on installation of free-standing grease separator plants as per DIN EN 1825-2
1 Ventilation
Inlet and outlet have to be adequately ventilated!

Take ventilation above roof
Connecting pipes exceeding 5 m
have to be separately ventilated.
Directly in front of the separator
plant, a ventilation pipe has to be
provided to inlet pipes exceeding
10 m and without ventilated connecting pipe!
2 Avoiding
Thermal insulation in the case of

inlet pipes led through unheated
cellar rooms
Heating in the case of inlet pipes in
building parts exposed to frost, as
e. g. in underground garages
Temperature of heating should be
adjustable via a thermostat.
With heated rooms and frostfree
laid pipes, no additional measures
are required.
grease deposits
Transition to horizontal pipes by

two 45 bends
Intermediate section must at least
be 250 mm long.
Then, a stabilisation path has to be
provided the length of which must
at least be ten times of nominal
width of inlet pipe. (Example with
DN 100: 100 x 10 = 1000 mm
stabilisation path)
Inlet pipes must have a slope of at
least 2 % (1:50).
3 Inlet
Pipe bottom of backflow loop has

to be taken above backflow level.
4 Backflow loop
Backflow
level
18
Grease Separators
Check list Enquiry for grease separators

Fax Sales Centre
Separating Technique
++49 - (0) 66 20/77 - 55
Enquirer
Company
Competent person
Street
Due date
Post code, town
Project
Telephone
Telefax
E-Mail
Remarks
Field of application
Slaughterhouse/meat
processing unit
Hotel/restaurant/large-scale kitchen/
catering establishment
Separators for
Fish processing unit

Steakhouse
Margarine factory/trade/industry
..........................
Material
Ground installation cover cl.... (A, B, D)
Frostfree depth ............ mm
PE-HD
Stainless steel
Reinforced concrete
New planning: Nominal size NG ......... resp. number of meals per day .................
Renovation existing plant type ..........................
with waste water liftng plant/pumping station:
Delivery head (suction height) geodesic ............... m. Nominal width DN .............
Length of disposal pump: .........m. Number of elbows DN: ............. 90/45
Designs
with direct suction or
with high-pressure inner cleaning
with additional
sampling device
with filling device
with disposal pump
Trench/erection space: L ......... x W.................x H ............. mm
Inlet: DN ..................
Bringing-in:
Access opening: L ............x W ...........mm
resp. diameter ............................ mm
Inlet height: ..................... mm

Stairs/corridor/passage: ........... x W .......... x H .............. mm
........... x W .......... x H .............. mm
Switch box
Surface resp.
Concealed housing:
Iso housing
Sheet steel housing
Remote control:
Inside assembly
Outside assembly
Switch box:
Distance to separator ......... m
Erection:
inside building
outside building
ACO passavant
Your system partner
ACO passavant
Tel. ++49 - (0) 6620 77-0
Separating technology/process technology:
Tel. ++49 - (0) 6620 77-0
Draining cast iron:
Tel. ++49 - (0) 6120 28-70 00
Pumps, lifting plants:
Tel. ++49 - (0) 631 2011-400
LTC Subject to alterations
Draining stainless steel/plastic:
Separating technology/
Process technology
Draining
Stainless steel / Plastic
Draining cast iron
Pumps &
Lifting plants
P.O. Box 11 62
D - 36267 Philippsthal
Ulsterstrae 3
D - 36269 Philippsthal
Tel. ++49 (0 ) 66 20/ 77 0
Fax ++49 (0 ) 66 20/ 77 52
P.O. Box 11 58
D - 65322 Aarbergen
An der B54
D - 65326 Aarbergen
Tel. ++49 (0) 61 20/28 - 70 00
Fax ++49 (0) 61 20/28 - 76 10
P.O. Box 25 80
D - 67613 Kaiserslautern
Brandenburger Strae 5
D - 67663 Kaiserslautern
Tel. ++49 (0) 6 31/20 11- 400
Fax ++49 (0) 6 31/20 11- 334
ACO Passavant GmbH
www.aco-passavant.de
Geb 32A/09/2004
Draining, separating, pumping

Grease Separators - 1

Uploaded by

Copyright:

Available Formats

Grease Separators - 1

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Grease Separators - 1

Uploaded by

Copyright:

Available Formats

ACO Passavant draining, separating, pumping

Why have grease separators to be used?

Industries generating waste water have

Grease separators pursuant to DIN 4040/DIN EN 1825 have to be set up

Excerpt from DIN 1986-100, paragraph 6.2.2

Why have light mineral liquid separators to be used?

Light mineral liquid separators constitute

When the European norm DIN EN 858

If mineral oils or light mineral liquids, particularly those which are

Excerpt from DIN 1986-100, paragraph 6.2.3

How you choose the correct separator

Animal and vegetable fats/oils

Dimensioning pursuant to:

Dimensioning pursuant to:

Dimensioning sheet under

Type of operating area

Material stainless steel

Material stainless steel

Material reinforced concrete

Material cast iron

Material reinforced concrete

Material cast iron

A grease separator operates purely mechanically according to the gravity principle

Inspection window with grease layer

Grease storage capacity

Function scheme as per DIN EN 1825

Imaginary sludge trap

Contents: 100 litres x NG;

with meat processing

tion of hydraulic check.

V4A STAINLESS STEEL (1.4571)

statically and dynamically permanently

mobile Ground inst.

V4A STAINLESS STEEL (1.4571)

Separator shapes in free-standing installation

extreme construction conditions, such as

dismountable into individual segments

particularly suitable for reconditioning

max. segment dimensions (LxWxH):

for extreme installation situations (narrow staircases, lift shafts)

Lifting plants/pumping stations for grease separators

Excerpt from DIN EN 1825-2, paragraph 7.3

Grease separator plant

MULI -PRO PE duo

Prefabricated reinforced concrete

Inspection window optional

Inspection window optional

Filling device optional

Nominal sizes 15, 20 and larger upon request

*integrated sampling device

General dimensional drawing

(drawing for table of page 11)

Inspection window optional

Inspection window optional

Nominal sizes 15, 20 and larger upon request

*integrated sampling device

Remote control optional