Scribd
Upload
207 views

Memory Layout of C Program

memory layout of c program. it is a very important layer of projects including bss segment. if someone get this, he will be happy.

Uploaded by

Chittaranjan Baral
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
207 views

Memory Layout of C Program

memory layout of c program. it is a very important layer of projects including bss segment. if someone get this, he will be happy.

Uploaded by

Chittaranjan Baral
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

10/13/2014

Section 7.6. Memory Layout of a C Program

7.6. Memory Layout of a C Program


Historically, a C program has been composed of the following pieces:
Text segment, the machine instructions that the CPU executes. Usually, the text segment is sharable so that only a single
copy needs to be in memory for frequently executed programs, such as text editors, the C compiler, the shells, and so
on. Also, the text segment is often read-only, to prevent a program from accidentally modifying its instructions.
Initialized data segment, usually called simply the data segment, containing variables that are specifically initialized in the
program. For example, the C declaration
int

maxcount = 99;

appearing outside any function causes this variable to be stored in the initialized data segment with its initial value.
Uninitialized data segment, often called the "bss" segment, named after an ancient assembler operator that stood for
"block started by symbol." Data in this segment is initialized by the kernel to arithmetic 0 or null pointers before the
program starts executing. The C declaration
long

sum[1000];

appearing outside any function causes this variable to be stored in the uninitialized data segment.
Stack, where automatic variables are stored, along with information that is saved each time a function is called. Each
time a function is called, the address of where to return to and certain information about the caller's environment, such
as some of the machine registers, are saved on the stack. The newly called function then allocates room on the stack for
its automatic and temporary variables. This is how recursive functions in C can work. Each time a recursive function calls
itself, a new stack frame is used, so one set of variables doesn't interfere with the variables from another instance of the
function.
Heap, where dynamic memory allocation usually takes place. Historically, the heap has been located between the
uninitialized data and the stack.
Figure 7.6 shows the typical arrangement of these segments. This is a logical picture of how a program looks; there is no
requirement that a given implementation arrange its memory in this fashion. Nevertheless, this gives us a typical arrangement to
describe. With Linux on an Intel x86 processor, the text segment starts at location 0x08048000, and the bottom of the stack starts
just below 0xC0000000. (The stack grows from higher-numbered addresses to lower-numbered addresses on this particular
architecture.) The unused virtual address space between the top of the heap and the top of the stack is large.

Figure 7.6. Typical memory arrangement

http://www.cs.bgu.ac.il/~caspl122/wiki.files/lab2/ch07lev1sec6/ch07lev1sec6.html

1/2

10/13/2014

Section 7.6. Memory Layout of a C Program

Several more segment types exist in an a.out, containing the symbol table, debugging information, linkage tables
for dynamic shared libraries, and the like. These additional sections don't get loaded as part of the program's
image executed by a process.
Note from Figure 7.6 that the contents of the uninitialized data segment are not stored in the program file on disk. This is
because the kernel sets it to 0 before the program starts running. The only portions of the program that need to be saved in the
program file are the text segment and the initialized data.
The size(1) command reports the sizes (in bytes) of the text, data, and bss segments. For example:
$ size /usr/bin/cc /bin/sh
text
data
bss
dec
79606
1536
916
82058
619234
21120 18260 658614

hex
1408a
a0cb6

filename
/usr/bin/cc
/bin/sh

The fourth and fifth columns are the total of the three sizes, displayed in decimal and hexadecimal, respectively.

http://www.cs.bgu.ac.il/~caspl122/wiki.files/lab2/ch07lev1sec6/ch07lev1sec6.html

2/2

You might also like