Regenerating model.

AutoCAD menu utilities

loaded.
Command:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: cylinder
Current wire frame density:
ISOLINES=4
Specify center point for base
of cylinder or [Elliptical]
<0,0,0>:
Specify radius for base of
cylinder or [Diameter]: 3
Specify height of cylinder or
[Center of other end]: 25

Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: sphere

Command: rotate3d
Initializing...
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0

Current wire frame density:

ISOLINES=4
Specify center of sphere
<0,0,0>:
Specify radius of sphere or
[Diameter]: 3

Select objects: 1 found

Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90

Command:
Command: sphere
Current wire frame density:
ISOLINES=4
Specify center of sphere
<0,0,0>:
Specify radius of sphere or
[Diameter]: 3

Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 4
Specify width: 1
Specify height: 2
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 10.0000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius
<10.0000>: *Cancel*
1 edge(s) selected for fillet.
No fillet to be computed.

Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f

Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 10.0000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius
<10.0000>: *Cancel*
1 edge(s) selected for fillet.
No fillet to be computed.
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 10.0000
Select first object or
[Polyline/Radius/Trim]:

Enter fillet radius

<10.0000>: 2
Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:
1 edge(s) selected for fillet.
Command: Specify opposite
corner:
Command: copy
1 found
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0

[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90

Command:
Command: Specify opposite
corner: *Cancel*

Command: _u ROTATE3D
Command: rotate3d

Command:
Command: m
MOVE 1 found
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: *Cancel*

Current positive angle:

ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90

Specify first point on axis or

define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90
Command: _u ROTATE3D
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify first point on axis or
define axis by

Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 7

Command: m
MOVE
Select objects: 1 found

Select objects: 1 found

Select objects:

Command: *Cancel*

Specify width: 1
Specify height: 4

Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3

Command:
Command: _.erase 1 found
Command:
Command: Specify opposite
corner:
Command:
Command: *Cancel*
Command:
Command:
Command: _.erase 2 found
Command: *Cancel*
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 7
Specify width: 1

Specify height: 2
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 2.0000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <2.0000>:
2
Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:

Specify base point or

displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command: mi
MIRROR 1 found
Specify first point of mirror
line: Specify second point of
mirror line:
Delete source objects?
[Yes/No] <N>:
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0

1 edge(s) selected for fillet.

Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: mi
MIRROR
Select objects: 1 found
Select objects:
Specify first point of mirror
line: Specify second point of
mirror line:
*Cancel*
Command: mi
MIRROR
Select objects: 1 found

Select objects: 1 found

Command: copy
Select objects:
Select objects: 1 found
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: rotate3d

Specify first point on axis or

define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90
Command: rotate3d

Current positive angle:

ANGDIR=counterclockwise
ANGBASE=0

Current positive angle:

ANGDIR=counterclockwise
ANGBASE=0

Select objects: 1 found

Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90
Command: m
MOVE
Select objects: 1 found
Select objects:

Select objects: Specify

opposite corner: 1 found
Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90
Command: m
MOVE
Select objects: 1 found

Select objects:
Specify first point of mirror
line: Specify second point of
mirror line:
*Cancel*
Command: copy
Select objects: Specify
opposite corner: 1 found
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:

Specify rotation angle or

[Reference]: 180

Select an edge or
[Chain/Radius]:

Command: m
MOVE
Select objects: 1 found

2 edge(s) selected for fillet.

Command: copy
Select objects: 1 found

Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l

Modeling Operation Error:

Empty sheet body made.
Failed to perform blend.
Failure while filleting.

Select objects: 1 found

Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 2.0000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <2.0000>:
0.5
Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:
Select an edge or
[Chain/Radius]:
2 edge(s) selected for fillet.

Specify length: 30
Specify width: 5
Specify height: 0.5
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 2.0000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <2.0000>:
1
Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:

Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: copy

Command:
Command: copy
1 found
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: cylinder

Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: copy
Select objects: 1 found
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command:
Command: m
MOVE 1 found
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command: m
MOVE
Select objects: 1 found

Current wire frame density:

ISOLINES=4
Specify center point for base
of cylinder or [Elliptical]
<0,0,0>:
Specify radius for base of
cylinder or [Diameter]: 0.2

Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*

Specify height of cylinder or

[Center of other end]: 11

Command:
Command:

Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command: m
MOVE
Select objects: Specify
opposite corner: 0 found
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command: m
MOVE 1 found
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_top Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _-view Enter an
option

[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command:
Command: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _ddvpoint
Initializing... DDVPOINT
loaded.
Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_right Regenerating model.
Command: Specify opposite
corner:
Command: m
MOVE 1 found

Specify base point or

displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: l
LINE Specify first point:
Specify next point or
[Undo]: *Cancel*
Command:
Command:

Command: _-view Enter an

option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_right Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: *Cancel*
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 6
Specify next point or
[Undo]: *Cancel*
Command: l
LINE Specify first point:
Specify next point or
[Undo]: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:

Command: _.erase 1 found

Command: l
LINE Specify first point:
Specify next point or
[Undo]: 6
Specify next point or
[Undo]:
Specify next point or
[Close/Undo]: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects: 1 found (1
duplicate), 1 total
Select objects: 1 found (1
duplicate), 1 total
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found

Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 6
Specify next point or
[Undo]:
Specify next point or
[Close/Undo]: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects: 1 found (1
duplicate), 1 total
Select objects: 1 found (1
duplicate), 1 total

Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 6
Specify next point or
[Undo]: *Cancel*
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _3

Command: _u
INTELLIZOOM GROUP
Command: _u 3DORBIT
GROUP Regenerating
model.
Command: l
LINE Specify first point:
Specify next point or
[Undo]:
Specify next point or
[Undo]: *Cancel*

Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.

Command: copy
Select objects: 1 found
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: copy

Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command: _.erase 1 found
Command: cone

Select objects: 1 found

Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 6
Specify next point or
[Undo]: *Cancel*
Command: m
MOVE
Select objects: 1 found

Current wire frame density:

ISOLINES=4
Specify center point for base
of cone or [Elliptical]
<0,0,0>:
Specify radius for base of
cone or [Diameter]: 3
Specify height of cone or
[Apex]: 5
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90

Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
*Cancel*
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90
Command: _u ROTATE3D
Command: rotate3d

MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 5

Current positive angle:

ANGDIR=counterclockwise
ANGBASE=0

Specify width: 1

Select objects: 1 found

Command: rotate3d

Select objects:

Current positive angle:

ANGDIR=counterclockwise
ANGBASE=0

Specify first point on axis or

define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: -90
Command: m

Specify height: 6

[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 1
Specify next point or
[Undo]:
Specify next point or
[Close/Undo]:
Command:
LINE Specify first point:
Specify next point or
[Undo]: 1
Specify next point or
[Undo]:
Specify next point or
[Close/Undo]:
Command: slice
Select objects: 1 found
Select objects:
Specify first point on slicing
plane by
[Object/Zaxis/View/XY/YZ
/ZX/3points]
<3points>:
Specify second point on
plane: *Cancel*
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 1
Specify next point or
[Undo]:
Specify next point or
[Close/Undo]:

Select objects: 1 found

Command: slice
Select objects:
Select objects: 1 found
Specify first point on axis or
define axis by

Select objects:

Specify first point on slicing

plane by
[Object/Zaxis/View/XY/YZ
/ZX/3points]
<3points>:
Specify second point on
plane:
Specify third point on plane:
Specify a point on desired
side of the plane or [keep
Both sides]:

Command: _u FILLET
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
*Cancel*

Command:
Command:
Command:
Command: _.erase 3 found

No fillet to be computed.

Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
*Cancel*

1 edge(s) selected for fillet.

Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
1

1 edge(s) selected for fillet.

Select an edge or
[Chain/Radius]:
Select an edge or
[Chain/Radius]: *Cancel*

No fillet to be computed.

2 edge(s) selected for fillet.

Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
0.2

No fillet to be computed.

Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:
Select an edge or
[Chain/Radius]:
2 edge(s) selected for fillet.
Command: _u
INTELLIZOOM
Command: _u
INTELLIZOOM

Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
1
Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:
Select an edge or
[Chain/Radius]:
2 edge(s) selected for fillet.
Command: l
LINE Specify first point:

Specify next point or

[Undo]:
Specify next point or
[Undo]:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command: Specify opposite
corner: _.erase
Invalid window
specification.
Command: Specify opposite
corner:
Command:
Command:
Command: _.erase 3 found
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _3
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command:
Command: _qsave

Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 2
Specify width: 0.2
Specify height: 5

Command: cylinder
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 8

Specify height of cylinder or

[Center of other end]: 16

Specify next point or

[Undo]:

Command: l
LINE Specify first point:
Specify next point or
[Undo]: 1

Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0

Command: m*Cancel*

Select objects: 1 found

Command: copy

Select objects:

Select objects: 1 found

Specify first point on axis or

define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90

Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
*Cancel*

Command: l
LINE Specify first point:
Specify next point or
[Undo]: 8

Command: copy

Specify next point or

[Undo]: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.

Current wire frame density:

ISOLINES=4
Specify center point for base
of cylinder or [Elliptical]
<0,0,0>:
Specify radius for base of
cylinder or [Diameter]: 0.2

Specify next point or

[Undo]:
Command:
LINE Specify first point:
Specify next point or
[Undo]: 1
Specify next point or
[Undo]:
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 1

Select objects: 1 found

Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.

Specify next point or

[Undo]:
Command: m
MOVE
Select objects: 1 found
Select objects: 1 found, 2
total
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: cylinder
Current wire frame density:
ISOLINES=4

Specify center point for base

of cylinder or [Elliptical]
<0,0,0>:
Specify radius for base of
cylinder or [Diameter]: 2
Specify height of cylinder or
[Center of other end]: 2
Command: copy
Select objects: 1 found
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command: m
MOVE

Select objects: 1 found

Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_swiso Regenerating model.
Command: m
MOVE
Select objects: Specify
opposite corner: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:

Command: _-view Enter an

option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command:
Command: copy
2 found
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command:
Command: copy
1 found
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:

Command: m
MOVE
Select objects: Specify
opposite corner: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command: m
MOVE 1 found
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_swiso Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: cylinder
Current wire frame density:
ISOLINES=4
Specify center point for base
of cylinder or [Elliptical]
<0,0,0>:

Specify radius for base of

cylinder or [Diameter]: 0.2
Specify height of cylinder or
[Center of other end]: 4
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 0.5
Specify next point or
[Undo]: *Cancel*
Command: m
MOVE
Select objects: Specify
opposite corner: 0 found
Select objects: Specify
opposite corner: 2 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command: <Cycle on>
<Cycle off>
Command: m
MOVE 2 found
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 0.5

Specify next point or

[Undo]: *Cancel*
Command: m
MOVE
Select objects: Specify
opposite corner: 3 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command: *Cancel*
Command:
Command: *Cancel*
Command:
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 1

Specify next point or

[Undo]:
Command: m
MOVE
Select objects: Specify
opposite corner: 2 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command: _.erase 1 found
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_front Regenerating model.
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 1

Specify next point or

[Undo]:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command: _.erase 1 found
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Select objects: Specify
opposite corner: 5 found

[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 30
Command: l
LINE Specify first point:
*Cancel*
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_bottom Regenerating
model.
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 6
Specify next point or
[Undo]:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command:
Command: _.erase 1 found

Select objects:
Specify first point on axis or
define axis by

Command: l
LINE Specify first point:
Specify next point or
[Undo]: 2

Specify next point or

[Undo]: *Cancel*
Command:
LINE Specify first point:
Specify next point or
[Undo]: *Cancel*
Command:
Command:
Command: _view
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_right Regenerating model.
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 3
Specify next point or
[Undo]:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: m
MOVE
Select objects: *Cancel*
Command: l
LINE Specify first point:
Specify next point or
[Undo]:
Specify next point or
[Undo]:
Command: _u LINE
Command: l
LINE Specify first point:
Specify next point or
[Undo]:
Specify next point or
[Undo]:
Command: m

MOVE
Select objects: Specify
opposite corner: 6 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _ucs
Current ucs name: *NO
NAME*
Enter an option
[New/Move/orthoGraphic/P
rev/Restore/Save/Del/Apply
/?/World]
<World>: _3
Specify new origin point
<0,0,0>:
Specify point on positive
portion of X-axis
<3.3542,1.6630,-3.2660>:

Specify point on positive-Y

portion of the UCS XY
plane <3.0625,0.9570,3.2660>:
Command:
Command:
Command: _ucs
Current ucs name: *NO
NAME*
Enter an option
[New/Move/orthoGraphic/P
rev/Restore/Save/Del/Apply
/?/World]
<World>: _3
Specify new origin point
<0,0,0>:
Specify point on positive
portion of X-axis
<6.9559,7.5279,-7.8929>:
Specify point on positive-Y
portion of the UCS XY
plane <4.9559,7.5279,7.8929>:
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 5
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 2
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:

Specify dimension line

location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
*Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 27
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 2
Specify dimension line
location or
[Mtext/Text/Angle]:
Command:
Command:
Command: _dimradius
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Dimension text = 2

Specify dimension line

location or
[Mtext/Text/Angle]:
*Cancel*

Select arc or circle:

Object selected is not a
circle or arc.

Dimension text = 6.62

Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 15.09
Command:
Command:
Command: _dimdiameter
Select arc or circle:
Object selected is not a
circle or arc.

Select arc or circle:

Object selected is not a
circle or arc.

Select arc or circle:

Object selected is not a
circle or arc.

Select arc or circle:

Select arc or circle:
Dimension text = 3
Specify dimension line
location or
[Mtext/Text/Angle]:
*Cancel*

Select arc or circle:

Object selected is not a
circle or arc.

Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 30
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:

Select arc or circle:

Object selected is not a
circle or arc.

Command:
Command:
Command: _dimradius
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.

Select arc or circle:

Object selected is not a
circle or arc.

Select arc or circle:

Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Select arc or circle:
Dimension text = 4
Specify dimension line
location or
[Mtext/Text/Angle]:
*Cancel*
Command:
Command:
Command: _dimradius

Select arc or circle:

Dimension text = 2
Specify dimension line
location or
[Mtext/Text/Angle]:
*Cancel*
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 2
Specify dimension line
location or
[Mtext/Text/Angle]:
Command:
Command: _.erase 1 found
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 1
Command:
Command: _.erase 1 found
Command: '_dimstyle
Command:
Command:
Command: _qsave
Command:
Command:
Command: _ucs
Current ucs name: *NO
NAME*
Enter an option
[New/Move/orthoGraphic/P
rev/Restore/Save/Del/Apply
/?/World]
<World>: _3
Specify new origin point
<0,0,0>:
Specify point on positive
portion of X-axis
<31.0047,1.0000,0.0000>:
Specify point on positive-Y
portion of the UCS XY

plane
<30.0047,2.0000,0.0000>:
Points are colinear
Specify point on positive-Y
portion of the UCS XY
plane
<30.0047,2.0000,0.0000>:
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 2
Specify dimension line
location or
[Mtext/Text/Angle]:
*Cancel*
Command:
Command:
Command: _dimradius
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Dimension text = 3
Specify dimension line
location or
[Mtext/Text/Angle]:
*Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 0.5
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:

Specify second extension

line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 6
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 11
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 2
Specify dimension line
location or
[Mtext/Text/Angle]:
Command:
Command: _.erase 1 found
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command:
Command:
Command: _qsave
Command:
Command:
Command: _+vports
Tab index <0>: 0
Regenerating model.
Regenerating model.
Regenerating model.
Regenerating model.
Regenerating model.
Command:
Command:

Command: _qsave