0% found this document useful (0 votes)
106 views5 pages

HC - SR501 Body Sensor Module

The document provides specifications for the DYP-ME003 HC-SR501 body sensor module. The module is an infrared sensor that detects human presence within a range of 5-7 meters and triggers an output. It has adjustable delay times and blocking periods to prevent repeated triggering. The module operates on 4.5-20V and consumes less than 50uA. It can be used in security systems, toys, lighting controls, and industrial automation to detect human movement and activate devices.

Uploaded by

Adam Ahmat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
106 views5 pages

HC - SR501 Body Sensor Module

The document provides specifications for the DYP-ME003 HC-SR501 body sensor module. The module is an infrared sensor that detects human presence within a range of 5-7 meters and triggers an output. It has adjustable delay times and blocking periods to prevent repeated triggering. The module operates on 4.5-20V and consumes less than 50uA. It can be used in security systems, toys, lighting controls, and industrial automation to detect human movement and activate devices.

Uploaded by

Adam Ahmat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Tech Support: services@elecfreaks.

com

Specification of DYP-ME003
1 Electrical parameters
Product Type

HC--SR501 Body Sensor Module

Operating voltage range

DC 4.5-20V

Quiescent Current

<50uA

Level output

High 3.3 V /Low 0V


L can not be repeated trigger/H can be repeated

Trigger
trigger(Default repeated trigger)
5-200S(adjustable) the range is (0.xx second to tens of
Delay time
second)
Block time

2.5S(default)Can be made a range(0.xx to tens of seconds

Board Dimensions

32mm*24mm

Angle Sensor

<100 cone angle

Operation Temp.

-15-+70 degrees

Lens size sensor

Diameter:23mm(Default)

2 Features:
1, the automatic sensor: to enter the sensor output range is high, people
leave the sensor range of the automatic delay off high, output low.
2, the photosensitive control (optional, factory is not set) may set the
photosensitive control during the day or light intensity without
induction.
2011-6-3

www.ElecFrecFreaks.com

Tech Support: [email protected]

3, the temperature compensation (optional, factory is not set): In the


summer when the ambient temperature rises to 30 ~ 32 , slightly shorter
detection range, temperature compensation can be used as a performance
compensation.
4, two trigger mode: (can be selected by jumpers)
a. can not repeat the trigger: the sensor output high, the delay time is
over, the output will automatically become low from high;
b. repeatable trigger: the sensor output high after the delay period, if
the human body in its sensing range
Activities, its output will remain high until after the delay will be left
high to low (sensor module review
Measured activities of each body will be automatically extended after a
delay time, and the final event of the delay time
Starting point of time).
5, with induction blocking time (the default setting: 2.5S block time):
sensor module, after each sensor output (high change
Into a low level), you can set up a blockade followed by time period, in
this time period the sensor does not accept any sensor signal.
This feature can have a "sensor output time" and "blocking time" the
interval between the work produced can be applied to detect the interval
Products; also inhibit this function during load switching for a variety
of interference. (This time can be set at zero seconds
- Tens of seconds).
6, the working voltage range: the default voltage DC4.5V-20V.
7, micro-power consumption: static current "50 microamps, especially for
battery-powered automatic control products.
8, the output high level signals: types of circuits can be easily and
docking.
2011-6-3

www.ElecFrecFreaks.com

Tech Support: [email protected]

3 Instructions:
1. Sensing module for about a minute after power initialization time,
during the interval to the output module
0-3 times a minute in standby mode.
2. Should avoid direct lighting such as interference sources close the
surface of the lens module so as to avoid the introduction of interference
signal generator malfunction; use of the environment to avoid the flow
of the wind, the wind sensor will also cause interference.
3. Sensor module using a dual probe, the probe's window is rectangular,
dual (A per B million) in the direction of the ends of long, when the body
passed from left to right or right to left when the reach the dual IR time,
distance difference, the greater the difference, more sensitive sensors,
when the body from the front to the probe or from top to bottom or from
bottom to top direction passing, dual IR not detected changes in the
distance, no difference value, the sensor insensitive or does not work;
so the sensors should be installed dual direction of the probe with human
activities as much as possible parallel to the direction of maximum to
ensure that the body has been passed by the dual sensor probe. To increase
the sensing range of angles, the module using a circular lens, the probe
also makes sense on all four sides, but still higher than the upper and
lower left and right direction of sensing range, sensitivity and strong,
still as far as possible by the above installation requirements.VCC, trig
(control side), echo (receiving end), GND

2011-6-3

www.ElecFrecFreaks.com

Tech Support: [email protected]

Induction Range:

Dimensions and Adjustment:


Note:
Note The potentiometer clockwise to adjust the distance, sensing
range increases (about 7 meters), on the contrary, sensing range decreases
(about 3 meters).
Delay adjustment potentiometer clockwise rotation, sensor delay longer
(about 300S), the other hand, induction by the short delay (about 5S).

2011-6-3

www.ElecFrecFreaks.com

Tech Support: [email protected]

Applications:
1, Security Products
2, the human body sensors toys
3, the human body sensor lighting
4, industrial automation and control, etc.
It can automatically and quickly open various types of incandescent,
fluorescent lamps, buzzer, automatic doors, electric fans, automatic
washing machine and dryer
Machines and other devices, is a high-tech products. Especially suitable
for enterprises, hotels, shopping malls, warehouses and family aisles,
corridors and other sensitive.
2011-6-3

www.ElecFrecFreaks.com

You might also like