======================================================================

KONICA MINOLTA bizhub C360 Series Printer

Printer Software Document
======================================================================
This document contains information about the software of this printer.
In addition, the problems that may happen when this printer is used
and the solutions are mentioned.
Read through this document before you use this printer.

///////////////////////////////////////////////////////////////////////////////
Attentions and Restrictions when using this printer
///////////////////////////////////////////////////////////////////////////////
This printer offers many convenient functions.
Depending on the application, similar functions are realized by itself.
In such a case, please be careful of the setting method etc.
Attentions and Restrictions of each functions are shown below.
(1)Paper Size Setting
1)When not printing as paper size setting
- Paper size can be set by Printer property, but it may become invalid
the paper size that is specified on the printer property according to
the application to use.
==> Please set the paper size on the Print menu of the application.
2)Wide Paper
When you use a Wide paper, load the paper in the tray and set the paper
size in the printer before the printing operation.
==> For the setting procedure, please refer to the User's Guide for the
printer.
(2)Paper Tray Setting
1)Cannot set Paper Tray.
- To set an optional tray for the Paper Tray, the optional Paper Source unit
is necessary. Also, you need to select the Paper Source unit in the
Device Option setting of the printer driver.
==> Please check the existence of Paper Source unit and the Device Option
setting.
- Paper Tray may have restriction depending on the specified paper size.
2)When Paper Tray setting doesn't work as specified.
- Paper Tray can be set by the printer property, but it may become invalid
the Paper Tray that is specified on the printer property according to
the application to use.
==> Please set the Paper Tray on the Print menu of the application.
- Paper may be fed from the tray other than the specified one depending on
the paper size set up on the printer.
(3)Original Orientation Setting
1)Original Orientation setting doesn't work as specified.
- Original Orientation can be set by the printer property, but it may become
invalid the Original Orientation that is specified on the printer property
depending on the application to use.
==> Please set Original Orientation in the application.

(4)Collate Functions
1)Collate doesn't work as specified.
Collate is able to be set by the printer property, but the following
situation may occur depending on the application to use if you specify
Collate on the Print menu.
- If Combination is specified, the last page of No. n copies
and the first page of No. n+1 copies are printed on the same paper.
- If 2-Sided is specified, the first page of No. n+1 copies is printed
on 2nd side of the last page of No. n copies.
- If Booklet is specified, all prints are collected into one book and printe
d.
- If Staple is specified, all prints are collected into one set and stapled.
- If Distribution Control Number is specified, all prints are printed
with the same number.
- If Secure Print is specified, the waiting documents for print for specifie
d
number of copies are stored in the printer.
- If Watermark is specified only on the first page of multiple copies of
printing, it will be stamped only on the first page of the first copy.
- Even if Offset is specified, it will be output without offset.
==> Please set No Collate on the Print menu and specify Collate on the print
er
property.
(5)Copies Setting
1)Proof Print and Copies
- In Microsoft Excel, even though Proof Print function is selected and multi
ple
copies are set for print, all copies of document will be printed without
storing.
*Proof Print function can not be specified with 1 copy. Also, even if the
multiple copies are set in Excel, Proof Print function is cancelled becau
se
all data are printed only 1 copy with number of set.
This can be solved by un-checking [Print on copy unit].
2)Copies Setting in Application
Some applications may allow you to set copies more than the device's limitat
ion,
but the printer can not print as specified in the applications.
(6)Front Cover / Back Cover
1)Paper for Front Cover / Back Cover
When you use Front and/or Back Cover function, it is necessary to set the co
rrect
paper beforehand in the Paper Tray for Front and/or Back Cover that is speci
fied
by the printer driver.
(7)User Authentication / Account Track
1) Printing under User Authentication and Account Track
When you use the printer that requires User Authentication / Account Track b
efore
printing, print is not accepted without entering the correct User Name, Depa
rtment
Name and Password.
2)When the Limitation for printing is exceeded at the Account Track
When the Account Track mode and Limitation for printing are enabled in the p
rinter,

if there is a job that stops in the middle of printing as the limit is reach
ed,
any following jobs are not printed unless the stopping job is canceled.
Please ask your administrator to cancel the limitation to output the stoppin
g
job or someone must delete the job after confirmation.
(8)Booklet and Saddle Stitch
1)Blank of Paper Center Part
When Booklet and Saddle Stitch are specified, blank space with a width of ab
out
10mm will occur in the center of paper.
==> Please make more than 5mm blank space of the original, then print it.
(9)Custom Size
1)Paper Width
If you specify a paper wider greater than 12.248 inches (311.1mm) when
you set the custom size, the printing results are not guaranteed.
(10)Others
1)Power OFF while printing / processing
Do not turn off the printer while it is printing / processing as a malfuncti
on
may occur. If the power is turned off by mistake, and a malfunction occurs,
turn off the printer once and then turn on again.
2)Screen Font
When printing with using screen fonts installed in your computer, some of
fonts or characters may not be printed correctly.
3)Print by USB on Mac OS
You cannot use on Mac printing by USB.
4)[Quality] on Mac OS X
[Quality]tab setting may not work depending on the original data.
5)Print with Root authority
Print setting screen is not displayed correctly when logged in with Root
authority. Please print after logging with another authority.
6)Standard OS function and Printer function
There are 2 types of setting mode in the print setting screen;
one is set with OS, and the other is set with printer.
If printing is not done correctly, do not use the OS function.
The OS function is not applicable for the following.
- Mac OS X:[Output Method], [Layout / Finish], [Paper Tray / Output Tray],
[Cover Mode / Transparency Interleave], [Per Page Setting],
[Stamp / Composition] and [Quality].
7) [Printer Sharing] in MacOSX
Printer sharing in MacOSX is not supported in this printer driver.
When printer sharing is performed, the printer driver screen may not be
displayed correctly on the client computer.
8)Add Printer
When the driver is not automatically selected and the Generic PostScript Pri
nter
is selected, please choose the printer driver you want to add.
9)Profile Download
If the download manager dialog is not displayed when you click Download Mana
ger in
the Quality Adjustment screen, please start the download manager manually
via the application folder.
----------------------------------------------------Cautions and restrictions with specific applications
-----------------------------------------------------

(1)Microsoft Office
1)AutoShapes Graphics Print in Microsoft Office
If the [Transparency] check box of [Fill] column in [Format AutoShape...][Colors and Lines]tab is ON, the paint-out part of graphics may not be
printed correctly at the time of reduction and enlargement print.
(2) Sandbox tested application
Sandbox testing is implemented for Application (Pages, Numbers, Keynote etc)
that is installed through App store and MacOSX 10.8(Mountain Lion) or
later Standard OS application (TextEdit, Preview, etc.)
Sandbox tested application has the following restrictions.
1)About Administrator Settings Function
For Sandbox applications, some of the Administrator Settings functions are
not available.
You can set the function(s) in the following applications:
- Safari
- Adobe Reader
- Microsoft Office for Mac
2)About Save Settings Function
For Sandbox applications, the Save Settings functions in the Advanced Setti
ngs dialog are not available.
If you want to save the Settings, you can set and save the function(s) in t
he following applications:
- Safari
- Adobe Reader
- Microsoft Office for Mac
3)About Obtain Device Information and Device Status Functions
For Sandbox applications, unable to use the Obtain Device Information funct
ion available
in the Printer Information dialog and reflect Device Status function of
the Paper Settings for Each Tray dialog of the Sandbox application.
You can access the function(s) in the following application.
- Safari
- Adobe Reader
- Microsoft Office for Mac
4)About Per Page Setting
For Sandbox applications, the Register/Add the Per Page Setting functions a
re not supported.
You can register/add the function(s) in the following application:
- Safari
- Adobe Reader
- Microsoft Office for Mac
5)About Manage Profile
For Sandbox applications, the Manage Profile of Quality Adjustment dialog
function is not supported.
You can use the function(s) in the following application:
- Safari
- Adobe Reader
- Microsoft Office for Mac
6)About Download Manager.
For Sandbox applications, the Download Manager button of the Quality Adjus
tment dialog is not supported.
You can use the function(s) in the following application:
- Safari

- Adobe Reader
- Microsoft Office for Mac
* Company names and product names written in this document are the
registered trademarks or trademarks of their respective companies.
Copyright(C) 2006 KONICA MINOLTA, INC.