This document discusses admixtures and additives used in concrete. It begins by defining admixtures as materials other than cement, water, and aggregates that are added to concrete to improve its properties. Common admixtures discussed include plasticizers, superplasticizers, retarders, accelerators, and air-entraining agents. Additives are then defined as pozzolanic or mineral materials that can improve concrete qualities when reacted with calcium hydroxide. Common additives mentioned are fly ash, silica fume, rice husk ash, and metakaoline. The benefits and uses of each admixture and additive type are described in detail over multiple paragraphs.
This document discusses admixtures and additives used in concrete. It begins by defining admixtures as materials other than cement, water, and aggregates that are added to concrete to improve its properties. Common admixtures discussed include plasticizers, superplasticizers, retarders, accelerators, and air-entraining agents. Additives are then defined as pozzolanic or mineral materials that can improve concrete qualities when reacted with calcium hydroxide. Common additives mentioned are fly ash, silica fume, rice husk ash, and metakaoline. The benefits and uses of each admixture and additive type are described in detail over multiple paragraphs.
This document discusses admixtures and additives used in concrete. It begins by defining admixtures as materials other than cement, water, and aggregates that are added to concrete to improve its properties. Common admixtures discussed include plasticizers, superplasticizers, retarders, accelerators, and air-entraining agents. Additives are then defined as pozzolanic or mineral materials that can improve concrete qualities when reacted with calcium hydroxide. Common additives mentioned are fly ash, silica fume, rice husk ash, and metakaoline. The benefits and uses of each admixture and additive type are described in detail over multiple paragraphs.
This document discusses admixtures and additives used in concrete. It begins by defining admixtures as materials other than cement, water, and aggregates that are added to concrete to improve its properties. Common admixtures discussed include plasticizers, superplasticizers, retarders, accelerators, and air-entraining agents. Additives are then defined as pozzolanic or mineral materials that can improve concrete qualities when reacted with calcium hydroxide. Common additives mentioned are fly ash, silica fume, rice husk ash, and metakaoline. The benefits and uses of each admixture and additive type are described in detail over multiple paragraphs.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 14
CHAPTER I
INTRODUCTION A. Issue Background Admixture is materials except cement, water, and aggregates, which used to added to concrete before or during the mixing. For concrete that needs special treatment such as concrete for high buliding or concrete for the harbour, its really neccessary to use admixture. Admixture also used to fix the concrete properties. The weather can be one of the cause of broken concrete. So that the admixture is exist to help concrete to prevent the damage. In this modern era, the development of admixtures has been found. The wasting substances, organic and anorganic, plastic, Even the dirt can be an admixture. B. Purpose The purpose of making this paper is to fulfill the task of the English that required in the 2nd term. Moreover, this paper is made so that students are able to understand the admixtures well, and also know the usage of the admixture in daily life.
B. Benefits The benefits of making this paper is to provide insight to the students about the admixture. So that the students can apply it when they have problems dealing with admixture
CHAPTER II DISCUSSION A. ADMIXTURE Admixtures are the material, other than Cement Water Aggregates Which are used as an ingredient of concrete and is added to batch immediately before or during mixing. The major reasons for using admixtures are: To reduce the cost of concrete construction. To achieve certain properties in concrete more effectively than by other means. To maintain the quality of concrete during the stages of mixing, transporting, placing, and curing in ad-verse weather conditions. To overcome certain emergencies during concreting operations. 1.
Plasticizers (water reducers)
The organic substances or combinations of organic and inorganic substances, which allow a reduction in water content for the given workability, or give a higher workability at the same water content, are termed as plasticizing admixtures. The basic products constituting plasticizers are as follows:
Anionic surfactants such as lignosulphonates and their modifications and derivatives,
salts of sulphonates hydrocarbons.
Non ionic surfactants, such as polyglycol esters, acid of hydroxylated carboxylic acids and their modifications and derivatives.
Other products, such as carbohydrates etc.
Used at
Thin walls of water retaining structures with high percentage of steel reinforcement
Deep beams, column and beam junctions
Tremie concreting
Pumping of concrete
Hot weather concreting
Concrete to be conveyed for considerable distance and in ready mixed concrete industries.
2.
SuperPlasticizers (High range water reducers)
Superplasticizers constitute a relatively new category and improved version of plasticizer, the use of which was developed in Japan and Germany during 1960 and 1970 respectively. They are chemically different from normal plasticisers. Classification of Superplasticizers:
Production of flowing, self levelling, self compacting concrete
Production of high strength and high performance concrete.
3.
Retarders A retarder is an admixture that slows down the chemical process of hydration so that concrete remains plastic and workable for a longer time than concrete without the retarder.
Retarders are used to overcome the accelerating effect of high temperature on setting properties of concrete in hot weather concreting.
Very useful when concrete has to be place in very difficult conditions and delay may occur in transporting and placing.
Gypsum and Calcium Sulphate are well known retarders.
Other examples are: starches, cellulose products, sugars, acids or salts of acids
Used at
4.
Casting and consolidating large number of pours without the formation of cold joints.
Grouting oil wells, where temperature is about 200 C, at a depth of 6000 meters.
Accelerators Accelerating admixtures are added to concrete to increase the rate of early strength development Why accelerators?
Permit earlier removal of formwork
Reduce the required period of curing
Advance the time that a structure can be placed in service
Partially compensate for the retarding effect of low temperature during cold weather concreting
In the emergency repair work.
Commonly used materials as an accelerator:
Calcium chloride (Not used now)
Some of the soluble carbonates
Silicates fluosilicates (Expensive)
Some of the organic compounds such as triethenolamine (Expensive)
Benefits of Accelerators
5.
Accelerators are so powerful that it is possible to make the cement set into stone hard in a matter of five minutes are less.
With the availability of such powerful accelerator, the under water concreting has become easy.
Similarly, the repair work that would be carried out to the waterfront structures in the region of tidal variations has become easy.
The use of such powerful accelerators have facilitated, the basement waterproofing operations.
Air-entraining Admixture
One of the important advancements made in concrete technology was the discovery of air entrained concrete.
In the United States and Canada, due to the recognition of the merits of air entrained concrete, about 85% of concrete manufactured in America contains one or the other type of air entraining agent.
By mixing a small quantity of air entraining agent or by using air entraining cement.
Minute spherical bubbles of size ranging from 5 microns to 80 microns distributed evenly in the entire mass of concrete.
These incorporated millions of non-coalescing air bubbles, which will act as flexible ball bearings and will modify the properties of plastic concrete regarding workability, segregation, bleeding and finishing quality of concrete.
It also modifies the properties of hardened concrete regarding its resistance to frost action and permeability.
The following types of air entraining agents are used for making air entrained concrete.
Natural wood resins
Animal and vegetable fats and oils, such as tallow, olive oil and their fatty acids such as stearic and oleic acids.
Various wetting agents such as alkali salts or sulphated and sulphonated organic compounds.
Water soluble soaps of resin acids, and animal and vegetable fatty acids.
Miscellaneous materials such as the sodium salts of petroleum sulphonic acids, hydrogen peroxide and aluminium powder, etc.
Vinsol resin and Darex are the most important air-entraining agents.
The Effect of Air Entrainment on the Properties of Concrete
Increased resistance to freezing and thawing.
Improvement in workability.
Reduction in strength.
Reduces the tendencies of segregation.
Reduces the bleeding and laitance.
Decreases the permeability.
Increases the resistance to chemical attack.
6
6.
Permits reduction in sand content.
Improves place ability, and early finishing.
Reduces the cement content, cost, and heat of hydration.
Reduces the unit weight.
Permits reduction in water content.
Reduces the alkali-aggregate reaction.
Reduces the modulus of elasticity.
Damp-proofing & Waterproofing Admixture
In practice one of the most important requirements of concrete is that it must be impervious to water under two conditions;
Firstly, when subjected to pressure of water on one side.
Secondly, to the absorption of surface water by capillary action.
Waterproofing admixtures are available in powder, paste or liquid form and may consist of pore filling or water repellent materials.
Chemically active pore filling materials: silicate of soda, aluminium/zinc sulphates and aluminium/calcium chloride.
Chemically inactive filling material: chalk, fullers earth and talc.
Results - effects
Chemically active pore fillers accelerates the setting of concrete and thus render the concrete more impervious at early age.
Chemically inactive pore fillers improve the workability and to facilitate the reduction of water for given workability and to make dense concrete which is basically impervious.
Water repelling materials like soda, potash soaps, calcium soaps, waxes, fats, vegetable oils repel water and make the concrete impervious
B. ADDITIVE 1.
Type of Additive Pozzolanic materials are:
Siliceous or siliceous-aluminous materials,
Little or no cementitious value,
In finely divided form and in the presence of moisture,
Chemically react with calcium hydroxide liberated on hydration, at ordinary temperature, to form compounds, possessing cementitious properties. They are also known as POZZOLANIC materials. Why Mineral additives? Improves many qualities of concrete, such as:
Lower the heat of hydration and thermal shrinkage;
Increase the water tightness;
Reduce the alkali-aggregate reaction;
Improve resistance to attack by sulphate soils and sea water;
Improve extensibility;
Lower susceptibility to dissolution and leaching;
Improve workability;
Lower costs.
Silica Fume
Rice Husk ash
Metakaoline
Surkh
2.
Fly ash Fly ash is finely divided residue resulting from the combustion of powdered coal and transported by the flue gases and collected by;
Electrostatic
Precipitator
Fly ash is the most widely usedpozzolanic material all over the world.
Types of fly ash
Class F
Fly ash normally produced by burning anthracite or bituminous coal, usually has less than 5% CaO. Class F fly ash has pozzolanic properties only.
Class C
Fly ash normally produced by burning lignite or sub-bituminous coal. Some class C fly ash may have CaO content in excess of 10%. In addition to pozzolanic properties, class C fly ash also possesses cementitious properties.
Results effects
Reduction of water demand for desired slump. With the reduction of unit water content, bleeding and drying shrinkage will also be reduced.
fly ash is not highly reactive, the heat of hydration can be reduced through replacement of part of the cement with fly ash. 9
Effects of Fly Ash on Hardened Concrete
contributes to the strength of concrete due to its pozzolanic reactivity.
continuedpozzolanic reactivity concrete develops greater strength at later age not at initial stage.
contributes to making the texture of concrete dense, resulting in decrease of water
permeability and gas permeability.
High volume Fly Ash has been used in the Barker Hall Project, University of California at Berkeley for the construction of shear walls. Used at
Many high-rise buildings
Industrial structures
Water front structures
Concrete roads
Roller compacted concrete dams.
10
In India, fly ash was used for the first time in the construction of Rihand Irrigation Project, Uttar Pradesh in 1962, replacing cement up to about 15 per cent
3.
Silica fume It is a product resulting from reduction of high purity quartz with coal in an electric arc furnace in the manufacture of silicon or ferrosilicon alloy.
Micro silica is initially produced as an ultrafine undensified powder
At least 85% SiO2 content
Mean particle size between 0.1 and 0.2 micron
Minimum specific surface area is 15,000 m2/kg
Spherical particle shape
11
Effect on fresh concrete
The increase in water demand of concrete containing microsilica will be about 1% for every 1% of cement substituted.
lead to lower slump but more cohesive mix.
make the fresh concrete sticky in nature and hard to handle.
large reduction in bleeding and concrete with microsilica could be handled and transported without segregation.
to plastic shrinkage cracking and, therefore, sheet or mat curing should be considered.
produces more heat of hydration at the initial stage of hydration.
the total generation of heat will be less than that of reference concrete.
Effect on hardened concrete
Modulus of elasticity of microsilica concrete is less.
Improvement in durability of concrete.
12
Resistance against frost damage.
Addition of silica fume in small quantities actually increases the expansion.
Used at
Conserve cement
Produce ultra high strength concrete of the order of 70 to 120 Mpa.
CHAPTER III CLOSING A. Conclusion Admixture is materials except cement, water, and aggregates, which used to added to concrete before or during the mixing. For concrete that needs special treatment such as concrete for high buliding or concrete for the harbour, its really neccessary to use admixture. Admixture also used to fix the concrete properties. B. Advice the usage of admixture in concrete should be proper to the requirements. the percentage of the admixture in concrete may not be too much. the usage of admixture must be fit to the needs of concrete.
