74ALVC00 Low Voltage Quad 2-Input NAND Gate With 3.6V Tolerant Inputs and Outputs

Revised February 2002
74ALVC00
Low Voltage Quad 2-Input NAND Gate
with 3.6V Tolerant Inputs and Outputs
General Description
Features
The ALVC00 contains four 2-input NAND gates. This product is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V.
3.6V tolerant inputs and outputs
The ALVC00 is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining
low CMOS power dissipation.
3 ns max for 3.0V to 3.6V VCC
1.65V to 3.6V VCC supply operation

tPD
3.5 ns max for 2.3V to 2.7V VCC
4.4 ns max for 1.65V to 1.95V VCC
Power-off high impedance inputs and outputs
Uses patented Quiet Series noise/EMI reduction
circuitry
Latchup conforms to JEDEC JED78
ESD performance:
Human body model > 2000V
Machine model > 250V
Ordering Code:
Order Number
Package Number
74ALVC00M
74ALVC00MTC
M14A
MTC14
Package Description
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter X to the ordering code.
Logic Symbol
Connection Diagram
IEEE/IEC
Pin Descriptions
Pin Names
Description
An , Bn
Inputs
On
Outputs
Quiet Series is a trademark of Fairchild Semiconductor Corporation.
2002 Fairchild Semiconductor Corporation
DS500626
www.fairchildsemi.com
74ALVC00 Low Voltage Quad 2-Input NAND Gate with 3.6V Tolerant Inputs and Outputs
September 2001
74ALVC00
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 3)
0.5V to +4.6V
Supply Voltage (VCC)
0.5V to 4.6V
DC Input Voltage (VI)

Output Voltage (VO) (Note 2)
Power Supply
0.5V to VCC +0.5V
Operating
DC Input Diode Current (IIK)

VI < 0V
50 mA
0V to VCC
Output Voltage (VO)
DC Output Diode Current (IOK)
0V to VCC
Free Air Operating Temperature (TA)
VO < 0V
50 mA
40C to +85C
Minimum Input Edge Rate (t/V)

VIN = 0.8V to 2.0V, VCC = 3.0V
DC Output Source/Sink Current
50 mA
(IOH/IOL)
100 mA
Supply Pin (I CC or GND)
5 ns/V
Note 1: The Absolute Maximum Ratings are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The Recommended Operating Conditions table will define the conditions for actual device operation.
DC VCC or GND Current per

Storage Temperature Range (TSTG)
1.65V to 3.6V
Input Voltage (VI)
65C to +150C
Note 2: IO Absolute Maximum Rating must be observed, limited to 4.6V.

Note 3: Floating or unused control inputs must be held HIGH or LOW.
DC Electrical Characteristics
Symbol
VIH
VIL
VOH
VOL
Parameter
Conditions
HIGH Level Input Voltage
LOW Level Input Voltage
HIGH Level Output Voltage
LOW Level Output Voltage
IOH = 100 A
VCC
(V)
Min
1.65 - 1.95
0.65 x VCC
2.3 - 2.7
1.7
2.7 - 3.6
2.0
Max
1.65 - 1.95
0.35 x VCC
2.3 - 2.7
0.7
2.7 - 3.6
0.8
1.65 - 3.6
VCC - 0.2
IOH = 4 mA
1.65
1.2
IOH = 6 mA
2.3
2.0
IOH = 12 mA
2.3
1.7
2.7
2.2
3.0
2.4
IOH = 24 mA
3.0
IOL = 100 A
1.65 - 3.6
0.2
1.65
0.45
IOL = 6 mA
2.3
0.4
IOL = 12 mA
2.3
0.7
2.7
0.4
IOL = 24 mA
3.0
IOL = 4 mA
Units
II
Input Leakage Current
0 VI 3.6V
3.6
5.0
ICC
Quiescent Supply Current
VI = VCC or GND, IO = 0
3.6
10
ICC
Increase in ICC per Input
VIH = VCC 0.6V
3 - 3.6
750
TA = 40C to +85C, RL = 500

Symbol
tPHL, tPLH
CL = 50 pF
Parameter
VCC = 3.3V 0.3V
Propagation Delay
Min
Max
1.0
3.0
CL = 30 pF
VCC = 2.7V
Min
VCC = 2.5V 0.2V
VCC = 1.8V 0.15V
Max
Min
Max
Min
Max
3.5
1.0
1.0
4.4
Units
ns
Capacitance
Symbol
Parameter
TA = +25C
Conditions
Units
VCC
Typical
CIN
Input Capacitance
VI = 0V or VCC
3.3
4.5
CPD
Power Dissipation Capacitance
f = 10 MHz, CL = 50 pF
3.3
23
2.5
21
1.8
20
pF
pF
AC Loading and Waveforms

TABLE 1. Values for Figure 1
TEST
SWITCH
tPLH, tPHL
Open
FIGURE 1. AC Test Circuit

TABLE 2. Variable Matrix
(Input Characteristics: f = 1MHz; tr = tf = 2ns; Z0 = 50
Symbol
VCC
3.3V 0.3V
2.7V
2.5V 0.2V
1.8V 0.15V
Vmi
1.5V
1.5V
VCC/2
VCC/2
Vmo
1.5V
1.5V
VCC/2
VCC/2
FIGURE 2. Waveform for Inverting and Non-inverting Functions
74ALVC00
AC Electrical Characteristics
74ALVC00
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M14A
14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC14
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems

which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
74ALVC00 Low Voltage Quad 2-Input NAND Gate with 3.6V Tolerant Inputs and Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
This datasheet has been download from:

www.datasheetcatalog.com
Datasheets for electronics components.

74ALVC00 Low Voltage Quad 2-Input NAND Gate With 3.6V Tolerant Inputs and Outputs

Uploaded by

Copyright:

Available Formats

74ALVC00 Low Voltage Quad 2-Input NAND Gate With 3.6V Tolerant Inputs and Outputs

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

74ALVC00 Low Voltage Quad 2-Input NAND Gate With 3.6V Tolerant Inputs and Outputs

Uploaded by

Copyright:

Available Formats

Revised February 2002

3.6V tolerant inputs and outputs

3 ns max for 3.0V to 3.6V VCC

1.65V to 3.6V VCC supply operation

Quiet Series is a trademark of Fairchild Semiconductor Corporation.

2002 Fairchild Semiconductor Corporation

Absolute Maximum Ratings(Note 1)

Supply Voltage (VCC)

DC Input Voltage (VI)

0.5V to VCC +0.5V

DC Input Diode Current (IIK)

Output Voltage (VO)

DC Output Diode Current (IOK)

Free Air Operating Temperature (TA)

Minimum Input Edge Rate (t/V)

DC Output Source/Sink Current

Supply Pin (I CC or GND)

DC VCC or GND Current per

Input Voltage (VI)

Note 2: IO Absolute Maximum Rating must be observed, limited to 4.6V.

HIGH Level Input Voltage

LOW Level Input Voltage

HIGH Level Output Voltage

LOW Level Output Voltage

Input Leakage Current

Quiescent Supply Current

Increase in ICC per Input

VIH = VCC 0.6V

TA = 40C to +85C, RL = 500

VCC = 3.3V 0.3V

VCC = 2.5V 0.2V

VCC = 1.8V 0.15V

Power Dissipation Capacitance

AC Loading and Waveforms

FIGURE 1. AC Test Circuit

FIGURE 2. Waveform for Inverting and Non-inverting Functions

Physical Dimensions inches (millimeters) unless otherwise noted

1. Life support devices or systems are devices or systems

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

This datasheet has been download from:

You might also like