QCAD Exercises Guide

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

3ESO, Tecnologia, QCAD, TS

QCAD
Reference manual (in spanish)
http://www.qcad.org/doc/qcad/2.2/reference/es/

Forum
http://www.qcad.org/rsforum/

Toolbars
Main Toolbar

Line Toolbar

Arc Toolbar

Modify Toolbar

1 de 8

Snap Toolbar

Circle Toolbar

3ESO, Tecnologia, QCAD, TS

How to adjust de grid spacing


Edit Drawing Preferences General Grid

How to create a new layer


In the top right sidebar, press the + button. A new dialog window will be open (layer data) where you can
change the name of the new layer and choose the color of the elements you will draw in this layer, also
you can specify the lineweight and linetype. Please, take note that all the lines of a layer would be of the
same weight.
Usually you will use a 0.18mm or 0.25 mm lineweight for the dimensions. Also, the dimensions for the
borders of the objects should be 0.5mm, and the hidden lines should be 0.35mm and dash linetype.

2 de 8

3ESO, Tecnologia, QCAD, TS

Exercise 0
Draw the title block (cajetn) as it is done in this images.
The A4 size is 210x297mm. The margins from the border of the paper are 5mm, except for the left margin
that is 25mm.
Steps:
1. First of all, with the line from two points
(LI) tool, draw the border of the paper in the
default layer using the coordinates: (0,0),
(210,0), (210,297), (0,297), (0,0). Write them
directly in the commands line.
2. In a new layer, called title block, with a
lineweight of 0,5mm, draw the exterior frame
of the title block using the coordinates: (25,5),
(205,5), (205,292), (25,292) and (25,5)
3. Using the parallel with distance (LP), draw
all the parallel lines.
4. All the yellow lines are interior lines, that
are in a new layer, called interior-lines. They
have been drawn with the parallel with
distance (LP) and then with the trim (RM)
tool, cut the lines that exceed its dimensions.
First select the limiting entity and then the
object to trim.
5. In a new layer, called, text, write the texts
that you see in the images.
6. Finally, it isn't necessary that you indicate
the dimensions of the diferents parts of the
7. Save the file with the name: exercise0-titleblock.
Here you can see a detail of the

Tip: You can use the Rectangle tool to draw the A4 paper and the title block, in this case you only need to
indicate the bottom-left corner and the right-upper corner.
3 de 8

4 de 8

3ESO, Tecnologia, QCAD, TS

Once you have finished this drawing, do a bitmap export (File Bitmap Export), use the filename
exercise1-pattern.bmp. Then, open the file with Paint a do a drawing like this:

5 de 8

3ESO, Tecnologia, QCAD, TS

Exercise 2
You should design a bathroom as this one. Save the file with filename exercise2-bathroom.dxf
Create three layers, one for the bathroom, another for the elements of the bathroom (sanitarians), and the
last one for the dimensions.

You should use the Library Browser in the upper right corner of the QCAD window. Once you have
selected the element (for example the sink) you should scale it to adjust to the desired dimensions. After
select the object you want to scale (for example the sink) you should mark Delete original, and choose a
scale factor of 1/10 = 0,1, then press OK, and put the scaled object in the desired position.
Library Browser

Scale Tool

Scale Tool Options

6 de 8

7 de 8

3ESO, Tecnologia, QCAD, TS

Exercise 4
Do the next drawing, using two layers, one for the pen and the other for the dimensions.

8 de 8

You might also like