Investment Banking Interview Guide

Access the Rest of the Interview Guide

Table of Contents Equity Value and Enterprise Value Questions

& Answers
Overview and Key Rules of Thumb ........................................................2
Key Rule #1: Equity Value and What It Means.....................................2
Key Rule #2: Enterprise Value and What It Means ..............................3
Key Rule #3: Diluted Shares Outstanding .............................................5
Key Rule #4: Items That Go Into Enterprise Value...............................7
Key Rule #5: Which One to Use? .............................................................9
For Further Learning .............................................................................. 11
Equity Value & Enterprise Value Model ............................................. 13
Equity Value & Enterprise Interactive Quiz ....................................... 14
Equity Value and Enterprise Value Questions & Answers ............. 15
Conceptual Questions Basic............................................................... 15
Conceptual Questions More Advanced ........................................... 20
Calculation Questions ............................................................................ 24

1 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

Overview and Key Rules of Thumb

If you want to value companies and model
transactions, you need to understand Equity
Value and Enterprise Value first.
This is the shortest technical section of the
interview guide because there arent that many
questions they could ask you on this topic at
least, not compared to the number of possible
questions on accounting, valuation, DCFs, merger models, and LBO models.
But the concepts here and the key rules of thumb are very important to
understand. If you get them right, youll understand the later technical sections
in this guide more effectively as well.
Just as with the other technical sections, were going to start with the concepts
and key rules of thumb and then move onto the 3 main categories of questions
you could get:
1. Basic Conceptual Questions (Whats the difference between Equity
Value and Enterprise Value?)
2. More Advanced Conceptual Questions (Why would you subtract the
value of Net Operating Losses when calculating Enterprise Value?)
3. Calculation Questions (A company has 100 basic shares outstanding.
Calculate its diluted shares outstanding if it has)
Lets get started with the key rules first:

Key Rule #1: Equity Value and What It Means

Equity Value, otherwise known as Market Capitalization or Market Cap, just
means: Share Price of Company * Total Number of Shares.

2 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
At a basic level it answers a simple question: How much is this company
worth?
If you have 1,000 shares outstanding and each
one is worth $10.00, for example, youre
worth $10.00 * 1,000, or $10,000.
Most public companies are worth hundreds of millions or billions of US Dollars.
When you read about a $10 billion company in the news, usually the $10
billion refers to the Equity Value of the company.
There is nothing complicated about determining a companys share price;
calculating the total number of shares can require more work, because theres
Basic Equity Value and Diluted Equity Value, which well get into in Key Rule
#3 below.

Key Rule #2: Enterprise Value and What It Means

If you compare buying a company to buying a house,
Equity Value is like the sticker price.
Youre driving by and you see a nice house or a
nice company how much does it cost to buy it?
Well, according to the sign on the front lawn, its on
sale for $500,000. And in the same way, maybe the
companys Equity Value is $500 million (50 million
shares * $10.00 per share).
But is that the true price to buy the house or the company?
Nope!
There are additional items that might push up the effective price afterward, or
possibly push down the effective price. For a house, these might be:

3 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

The previous owner left lots of furniture we can save some money!
We need to make significant repairs or improve the landscaping.
There are unpaid bills or other obligations that we need to pay off.

So the actual cost of buying that house may be much different from the sticker
price.
In the same way, the actual cost of buying a company may also be much
different from its sticker price its Equity Value:

The company might have Debt that needs to be repaid upon acquisition.
The company might have Excess Cash that we can claim for ourselves.
The company might have Unfunded Pension Obligations and other
Liabilities that well have to repay at some point.

To take into account all of those, we calculate Enterprise Value.

Think of it like this: Enterprise Value = Equity Value + Debt, Debt-Like Items
and Other Obligations Cash, Cash-Like Items, and Anything That Saves Us
Money.
Essentially we add anything that were going to have to set aside funds to pay off
in the future, and subtract anything that can save us money in the future.
A more precise definition would be:
Enterprise Value = Equity Value + Debt +
Preferred Stock + Noncontrolling Interests
Cash & Cash-Equivalents.
Well discuss each of those items and why
they get added or subtracted, as well as a few more advanced items, in Key Rule
#4 below.

4 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

Key Rule #3: Diluted Shares Outstanding

Calculating the exact number of shares a company has can be tricky due to
dilutive securities.
A security is dilutive if it could potentially create more shares. The best example
is a call option, which gives someone (usually an employee) the ability to pay
the company money and get a newly created share in return.
Lets say that a companys stock is worth $10.00 per share right now. It has also
issued call options to employees that have exercise prices of $5.00 per share. In
other words, employees can pay the company $5.00, and in exchange, receive
one (1) share thats worth $10.00 each time it pays the company $5.00.
Of course, these options might also be out-of-the-money for example, if the
exercise price is $15.00 rather than $5.00, the options cant be exercised until the
stock price hits $15.00 per share.
If employees have in-the-money options, why would they wait to exercise them?
One reason is the expectations of future value. If they think that the share price
will rise to $20.00 next week, theyll most likely hold onto their options. Also,
employees may be restricted from exercising their options depending on how
long theyve worked at the company in question.
But the potential for additional shares is always there and that is what we care
about when calculating the diluted shares for a company.
To calculate the impact of diluted shares, you use the
Treasury Stock Method: you assume that the new
shares get created when options are exercised, and that
the company then buys back some of those new shares
with the funds it receives.

5 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
Simple Example: Lets say that the companys share price is $10.00 and that 100
options were issued at $5.00 exercise prices.
The option holders exercise those options and get 100 shares and the company
receives $500 in cash as a result.
Since its share price is $10.00, it can
therefore buy back 50 shares with the
proceeds. So as a result, there are 50
additional shares outstanding and
the diluted share count goes up by 50.
With the Treasury Stock Method
(TSM), you assume that all in-the-money options contribute to dilution.
Options are the most common dilutive securities, but there are others:

Warrants: The treatment

is similar to options; use
the Treasury Stock
Method.
Convertible Bonds:
Treatment is either or
they count as debt, or
count 100% as additional shares, with no Treasury Stock Method involved
see the Calculations questions below for an example.
Convertible Preferred Stock: The same as the treatment above for
Convertibles.
Restricted Stock Units: These are a straight addition there are no
exercise prices or conversion prices to worry about.
Performance Shares: If the stock price is above a certain level, they count
as additional shares; otherwise, they count as nothing.

Why bother with this extra math to calculate the Diluted Equity Value of a
company?

6 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

For the same reason we calculate Enterprise Value: to see what it would really
cost to acquire a company.
When you buy another company, the purchase agreement normally states that
any in-the-money dilutive securities get cashed out or get converted into an
equivalent number of the buyers securities. Either of those scenarios would cost
the buyer something when it acquires the company in question.
So its more accurate to calculate the Diluted Equity Value when youre
determining the Enterprise Value otherwise youre underestimating how much
the company would truly cost to acquire.

Key Rule #4: Items That Go Into Enterprise Value

In this section, were going to cover the more common items that are added and
subtracted when calculating Enterprise Value (i.e. when you start with Equity
Value, and then add and subtract items to better approximate a companys true
value).

When Do You Subtract an Item? Normally when it saves you money or

potentially gives you extra cash, either immediately or in the long-term.
When Do You Add an Item? Normally 1) When it represents something
that must be paid immediately upon acquiring the company (e.g. Debt), or
2) When its something that must be repaid in the future, but wouldnt
come from the companys normal cash flows (e.g. Unfunded Pension
Obligations); or 3) When youre adding it back for comparability
purposes (e.g. Noncontrolling Interests).

Here are a few examples of items that you would subtract:

Cash: This saves you cash right away because its yours once you buy the
company; technically you should only subtract excess cash (i.e. the amount
over the minimum they need to operate) but normally you subtract the
entire amount.

7 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

(Potentially) Short-Term, Long-Term, and Equity Investments: You

could sell these investments in the future and get extra cash, so sometimes
theyre also subtracted depending on how liquid they are.
Net Operating Losses: These could potentially save you cash as future tax
deductions, so sometimes they are factored in (standards vary widely).

Now lets go through a few examples of items that you add because they
normally require immediate repayment in an acquisition scenario:

Debt: Its added because the acquirer normally has to repay it upon
completing the acquisition.
Preferred Stock: Its similar to Debt because of the required dividends,
which act as interest expense; also, normally it must also be repaid upon
acquisition.

Then there are items that get added because they must be repaid in the future,
but wouldnt necessarily come from the companys normal cash flows:

Unfunded Pension Obligations:

This is a big one for certain types of
companies (e.g. auto manufacturers).
If they have nowhere near enough
cash flow from normal business
operations to pay for these, theyll
need to get the money from
somewhere which means that the
buyer is paying, or that theyre
raising debt to pay for them.
Capital Leases: These are Debt-like items and sometimes you have to
repay these leases in an acquisition; similar to Unfunded Pension
Obligations, often you add them because the funds from ordinary
business operations are insufficient to repay these.
Restructuring / Environmental Liabilities: The logic is similar to the
points above these must be paid in the future to cover obligations that

8 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
the company owes, and if theyre significant the company probably wont
be able to cover them with its normal cash flow.
Theres only one common item in the final category items that you add back for
comparability purposes:

Noncontrolling Interests (AKA Minority Interests): You add these

because when you own over 50% of another company, you consolidate
100% of its financial statements with your own. But Equity Value only
reflects the value of the percentage that you own, not 100%. So you need to
reflect 100% of that other company in Enterprise Value if you did not
add Noncontrolling Interests, you would only be reflecting 60%, or 70%,
or however much you own.

Lets say that your revenue is $100, and you own 70% of another company that
has $50 in revenue. On your statements, you show $150 in revenue because you
consolidate 100% of the statements (see the Accounting section of the guide).
But Equity Value, by itself, only reflects the 70% of the other company that you
own. An Enterprise Value / Revenue multiple would be wrong because we
would have 100% of the other companys revenue, but only 70% of its value.
As a result, we need to add the Noncontrolling Interests line item that reflects the
30% we do not own that way, were including 100% of the other companys
value in Enterprise Value.
Do you need to know all the explanations above in an interview?
No, not really these more advanced items are unlikely to come up in entry-level
interviews. But its good to have some intuition behind why items get added or
subtracted when calculating Enterprise Value.

Key Rule #5: Which One to Use?

9 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
With this last rule, we move into Valuation territory which is technically the
next section of the guide.
You will almost always calculate both Equity Value and Enterprise Value for a
company. In fact, you need to calculate Equity Value before you can even
calculate Enterprise Value.
The only exception is that in some industries, such as commercial banking and
insurance, only Equity Value is meaningful see the industry-specific guides for
more on those.
So its not a question of Which one is more useful? since youll almost always
look at both. The real questions: What do they mean and when do you use each
one?
Weve already covered what they mean: Equity Value is like the sticker price
and Enterprise Value is how much the company would actually cost to acquire.
Their usage depends on whats in the denominator when calculating valuation
multiples.

Before Net Interest Expense

(and possibly Debt Payments)

Available to All Investors

(Equity and Debt)
Enterprise Value

Interest (and
possibly Debt
Payments)

Paid to Debt Investors

Theyre out of the equation
now.

If the denominator includes

interest income and expense,
you use Equity Value; if it is
does not include interest
income and expense, you use
Enterprise Value.

Think of a companys cash flow

like a funnel: at the top, before
any interest (or debt principal)
is paid, that cash flow is
available to both Equity and Debt investors, and so it therefore corresponds to
Enterprise Value.
After Net
Interest (and
possibly Debt
Payments)

Only Available to Equity

Investors Equity Value

10 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
Whereas after interest (and possibly debt principal) is paid, now the Debt
investors are entitled to nothing and everything remaining only goes to the
Equity Investors.
Heres a list of the key metrics you could use in the denominator of valuation
multiples, along with what you should use in the numerator:

Revenue: Enterprise Value

EBIT or Operating Income: Enterprise
Value
EBITDA: Enterprise Value
Net Income (EPS): Equity Value (Per Share
Price)
Unlevered Free Cash Flow (Free Cash
Flow to Firm): Enterprise Value
Levered Free Cash Flow (Free Cash Flow to Equity): Equity Value

There are more valuation multiples, but the ones above are the more common
ones.
When in doubt, think: Does this include interest income and expense, i.e. do we
subtract interest expense and add interest income to get to this metric?
If it does, use Equity Value; if it does not, use Enterprise Value.

For Further Learning

The rules above are a great start, but sometimes you need more: if youre in this
position, click here to check out our Financial Modeling Fundamentals course.
You receive a $50 discount as a Breaking Into Wall Street member, and you get 20
hours of video tutorials along with several bonus case studies on real M&A
deals and leveraged buyouts.

11 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
It has been one of our most popular courses year after year, and its a great way
to extend your knowledge of accounting, valuation, Equity Value and Enterprise
Value, and prepare even more for interviews.

12 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

Equity Value & Enterprise Value Model

This one is not a full model, but it is a very useful Excel file that will show you
how these concepts work in practice, and the different items that go into
calculating Equity Value and Enterprise Value.
Theres a Basic tab that lists the important items to know for entry-level
interviews, and then an Advanced tab that gives more detail and shows some
other possible additions when calculating Enterprise Value.
You can get the full model right here:

Equity Value and Enterprise Value Calculation Model

13 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

Equity Value & Enterprise Interactive Quiz

Weve also included two interactive quizzes in this section of the guide theyre
shorter than some of the other ones because theres not as much to say about
Equity Value and Enterprise Value.
But its still good to take one or both quizzes and refresh yourself on these
concepts, especially if you havent fully understood why and how you use them
differently for valuation purposes.

Basic Equity Value and Enterprise Value Quiz

Advanced Equity Value and Enterprise Value Quiz

14 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

Equity Value and Enterprise Value Questions & Answers

Equity Value and Enterprise Value questions are straightforward. In the short
summary above, weve been over 99% of what they could ask you about in
interviews.
The only substantial topics not covered above are related to specific industries, so
please see the industry-specific guides for discussions of those.

Conceptual Questions Basic

1. Why do we look at both Enterprise Value and Equity Value?
Enterprise Value represents the value of the company that is attributable to all
investors; Equity Value only represents the portion available to shareholders
(equity investors).
You look at both because Equity Value is the number the public-at-large sees
(the sticker price), while Enterprise Value represents its true value, i.e. what it
would really cost to acquire.
2. How do you use Equity Value and Enterprise Value differently?
Equity Value gives you a general idea of how much a company is worth;
Enterprise Value tells you, more specifically, how much it would cost to acquire.
Also, you use them differently depending on the valuation multiple youre
calculating. If the denominator of the multiple includes interest income and
expense (e.g. Net Income), you use Equity Value; otherwise, if it does not (e.g.
EBITDA), you use Enterprise Value.
3. Whats the formula for Enterprise Value?
Enterprise Value = Equity Value + Debt + Preferred Stock + Noncontrolling
Interests Cash

15 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

This is a simplified formula that you can usually get away with in interviews
for a more complete version see the More Advanced questions below.
4. Why do you need to add Noncontrolling Interests to Enterprise Value?
Whenever a company owns over 50% of another company, it is required to
report 100% of the financial performance of the other company as part of its own
performance.
So even though it doesnt own 100%, it reports 100% of the majority-owned
subsidiarys financial performance.
You must add the Noncontrolling Interest to get to Enterprise Value so that your
numerator and denominator both reflect 100% of the majority-owned subsidiary.
If you did not do that, the numerator would reflect less than 100% of the
company, but the denominator would reflect 100%.
5. How do you calculate diluted shares and Diluted Equity Value?
Take the basic share count and add in the dilutive effect of stock options and any
other dilutive securities, such as warrants, convertible debt, and convertible
preferred stock.
To calculate the dilutive effect of options and warrants, you use the Treasury
Stock Method (see the Calculations questions below).
6. Why do we bother calculating share dilution? Does it even make much of a
difference?
We do it for the same reason we calculate Enterprise Value: to more accurately
determine the cost of acquiring a company.

16 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
Normally in an acquisition scenario, in-the-money securities (ones that will
cause additional shares to be created) are 1) Cashed out and paid by the buyer
(raising the purchase price), or 2) Are converted into equivalent securities for the
buyer (also raising the effective price for the buyer).
Dilution doesnt always make a big difference, but it can be as high as 5-10% (or
more) so you definitely want to capture that.
7. Why do you subtract Cash in the formula for Enterprise Value? Is that
always accurate?
In an acquisition, the buyer would get the cash of the seller, so it effectively
pays less for the company based on how large its cash balance is. Remember,
Enterprise Value tells us how much youd effectively have to pay to acquire
another company.
Its not always accurate because technically you should subtract only excess cash
the amount of cash a company has above the minimum cash it requires to
operate.
But in practice, the minimum cash required by a company is difficult to
determine; also, you want the Enterprise Value calculation to be relatively
standardized among different companies, so you normally just subtract the
entire cash balance.
8. Is it always accurate to add Debt to Equity Value when calculating
Enterprise Value?
In most cases, yes, because the terms of a Debt issuance usually state that Debt
must be repaid in an acquisition. And a buyer usually pays off a sellers Debt, so
it is accurate to say that Debt adds to the purchase price.
Adding Debt is also partially a matter of standardizing the Enterprise Value
calculation among different companies: if you added it for some and didnt add

17 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
it for others, EV would no longer mean the same thing and valuation multiples
would be off.
9. Could a company have a negative Enterprise Value? What does that mean?
Yes. It means that the company has an extremely large cash balance, or an
extremely low market capitalization (or both). You often see it with companies
on the brink of bankruptcy, and sometimes also with companies that have
enormous cash balances.
10. Could a company have a negative Equity Value? What would that mean?
No. This is not possible because you cannot have a negative share count and you
cannot have a negative share price.
11. Why do we add Preferred Stock to get to Enterprise Value?
Preferred Stock pays out a fixed dividend, and Preferred Shareholders also have
a higher claim to a companys assets than equity investors do. As a result, it is
more similar to Debt than common stock. Also, just like Debt, typically Preferred
Stock must be repaid in an acquisition scenario.
12. How do you factor in Convertible Bonds into the Enterprise Value
calculation?
If the convertible bonds are in-the-money, meaning that the conversion price of
the bonds is below the current share price, then you count them as additional
dilution to the Equity Value (no Treasury Stock Method required just add all
the shares that would be created as a result of the bonds).
If the Convertible Bonds are out-of-the-money, then you count the face value of
the convertibles as part of the companys Debt.
See the Calculations section for an example of how to do the math.

18 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
13. Whats the difference between Equity Value and Shareholders Equity?
Equity Value is the market value and Shareholders Equity is the book value.
Equity Value could never be negative because shares outstanding and share
prices can never be negative, whereas Shareholders Equity could be positive,
negative, or 0.
For healthy companies, Equity Value usually far exceeds Shareholders Equity
because the market value of a companys stock is worth far more than its paper
value. In some industries (e.g. commercial banks and insurance firms), Equity
Value and Shareholders Equity tend to be very close.
14. Should you use Enterprise Value or Equity Value with Net Income when
calculating valuation multiples?
Since Net Income includes the impact of interest income and interest expense,
you always use Equity Value.
15. Why do you use Enterprise Value for Unlevered Free Cash Flow multiples,
but Equity Value for Levered Free Cash Flow multiples? Dont they both just
measure cash flow?
They both measure cash flow, but Unlevered Free Cash Flow (Free Cash Flow to
Firm) excludes interest income and interest expense (and mandatory debt
repayments), whereas Levered Free Cash Flow includes interest income and
interest expense (and mandatory debt repayments), meaning that only Equity
Investors are entitled to that cash flow (see the funnel diagram above).
Therefore, you use Equity Value for Levered Free Cash Flow and Enterprise
Value for Unlevered Free Cash Flow.
16. Lets say we create a brand-new operating metric for a company that
approximates its cash flow. Should we use Enterprise Value or Equity Value in
the numerator when creating a valuation multiple based on this metric?

19 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
It depends on whether or not this new metric includes the impact of interest
income and interest expense. If it does, you use Equity Value. If it does not, you
use Enterprise Value starting to notice a pattern here?

Conceptual Questions More Advanced

These questions are unlikely to come up in entry-level interviews, so skip them
unless you have significant full-time work experience in finance.
In this set of questions, we go into more detail on advanced additions to
Enterprise Value, as well as additional types of dilutive securities.
1. Can you describe a few of the additional items that might be a part of
Enterprise Value, beyond Cash, Debt, Preferred Stock, and Noncontrolling
Interests, and explain whether you add or subtract each one?
See the Key Rules of Thumb section above for more detail heres a summary:
Items That May Be Counted as Cash-Like Items and Subtracted:

Net Operating Losses Because you can use these to reduce future taxes;
may or may not be true depending on the company and deal.
Short-Term and Long-Term Investments Because theoretically you can
sell these off and get extra cash. May not be true if theyre illiquid.
Equity Investments Any investments in other companies where you
own between 20% and 50%; this one is also partially for comparability
purposes since revenue and profit from these investments shows up in the
companys Net Income, but not in EBIT, EBITDA, and Revenue (see the
Accounting section).

Items That May Be Counted as Debt-Like Items and Added:

Capital Leases Like Debt, these have interest payments and may need to
be repaid.

20 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

(Some) Operating Leases Sometimes you need to convert Operating

Leases to Capital Leases and add them as well, if they meet the criteria for
qualifying as Capital Leases (see the Accounting section).
Unfunded Pension Obligations These are usually paid with something
other than the companys normal cash flows, and they may be extremely
large.
Restructuring / Environmental Liabilities Similar logic to Unfunded
Pension Obligations.

Note that many of these items are discretionary.

Everyone agrees that Cash should be subtracted and Debt should be added when
calculating Enterprise Value, but when you get to more advanced items,
treatment varies greatly between different banks and different groups.
A more complete formula might be: Enterprise Value = Equity Value Cash +
Debt + Preferred Stock + Noncontrolling Interests NOLs Investments Equity
Investments + Capital Leases + Unfunded Pension Obligations and Other
Liabilities.
In interviews you can usually get away with stating, Enterprise Value = Equity
Value Cash + Debt + Preferred Stock + Noncontrolling Interests.
You should stick with that simplified formula unless you feel very confident in
your knowledge, or unless they ask you for the more advanced items.
2. Wait a second, why might you add back Unfunded Pension Obligations but
not something like Accounts Payable? Dont they both need to be repaid?
The distinctions are magnitude and source of funds. Accounts Payable, 99% of
the time, is paid back via the companys cash flow from its normal business
operations. And it tends to be relatively small.
Items like Unfunded Pension Obligations, by contrast, usually require additional
funding (e.g. the company raises Debt) to be repaid. These types of Liabilities

21 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
also tend to be much bigger than Working Capital / Operational Asset and
Liability items.
3. Are there any exceptions to the rules about subtracting Equity Interests and
adding Noncontrolling Interests when calculating Enterprise Value?
You pretty much always add Noncontrolling Interests because the financial
statements are always consolidated when you own over 50% of another
company.
But with Equity Interests, you only subtract them if the metric youre looking at
does not include Net Income from Equity Interests (which only appears toward
the bottom of the Income Statement).
For example, Revenue, EBIT, and EBITDA all exclude revenue and profit from
Equity Interests, so you subtract Equity Interests.
But with Levered Free Cash Flow (Free Cash Flow to Equity), typically youre
starting with Net Income Attributable to Parent which already includes Net
Income from Equity Interests.
Normally you subtract that out in the CFO section of the Cash Flow Statement so
you would still subtract Equity Interests if you calculate Free Cash Flow by going
through all the items in that section.
But if you have not subtracted out Net Income from Equity Interests (if youve
used some other formula to calculate FCF), you should not subtract it in the
Enterprise Value calculation you want to show its impact in that case.
This is a very subtle point, but you were warned: these are Advanced questions.
Most bankers would probably not understand the explanation above.
4. Should you use the Book Value or Market Value of each item when
calculating Enterprise Value?

22 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
Technically, you should use market value for everything. In practice, however,
you usually use market value only for the Equity Value portion because its
difficult to determine market values for the rest of the items in the formula so
you take the numbers from the companys Balance Sheet.
5. What percentage dilution in Equity Value is too high?
Theres no strict rule here, but most bankers would say that anything over 10%
is odd. If the basic Equity Value is $100 million and the diluted Equity Value is
$115 million, you might want to check your calculations its not necessarily
wrong, but over 10% dilution is unusual for most companies. And something
like 50% dilution would be highly unusual.
6. How do you factor in Convertible Preferred Stock in the Enterprise Value
calculation?
The same way you factor in normal Convertible Bonds: if its in-the-money, you
assume that new shares get created, and if its not in the money, you count it as
Debt.
7. How do you factor in Restricted Stock Units (RSUs) and Performance Shares
when calculating Diluted Equity Value?
RSUs should be added to the common share count, because they are just
common shares. The only difference is that the employees who own them have
to hold onto them for a number of years before selling them.
Performance Shares are similar to Convertible Bonds, but if theyre not in-themoney (the share price is below the performance share price target), you do not
count them as Debt you just ignore them altogether. If they are in-the-money,
you assume that they are normal common shares and add them to the share
count.
8. Whats the distinction between Options Exercisable vs. Options
Outstanding? Which one(s) should you use when calculating share dilution?

23 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

Options Exercisable vs. Options Outstanding: Normally companies put

in place restrictions on when employees can actually exercise options so
even if there are 1 million options outstanding right now, only 500,000
may actually be exercisable even if theyre all in-the-money.

Theres no correct answer for which one to use here. Some people argue that
you should use Options Outstanding because typically, all non-exercisable
Options become exercisable in an acquisition, so thats the more accurate way to
view it.
Others argue that Options Exercisable is better because you dont know whether
or not the non-exercisable ones will become exercisable until the acquisition
happens.
However you treat it, you need to be consistent with all the companies you
analyze.

Calculation Questions
1. Lets say a company has 100 shares outstanding, at a share price of $10.00
each. It also has 10 options outstanding at an exercise price of $5.00 each what
is its Diluted Equity Value?
Its basic equity value is $1,000 (100 * $10 = $1,000). To calculate the dilutive effect
of the options, first you note that the options are all in-the-money their
exercise price is less than the current share price.
When these options are exercised, 10 new shares get created so the share count
is now 110 rather than 100.
However, that doesnt tell the whole story. In order to exercise the options, we
had to pay the company $5 for each option (the exercise price).

24 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
As a result, it now has $50 in additional cash, which it uses to buy back 5 of the
new shares we created.
So the fully diluted share count is 105 and the Diluted Equity Value is $1,050.
2. Lets say a company has 100 shares outstanding, at a share price of $10 each.
It also has 10 options outstanding at an exercise price of $15 each what is its
Diluted Equity Value?
$1,000. In this case the options exercise price is above the current share price, so
they have no dilutive effect.
3. A company has 1 million shares outstanding at a value of $100 per share. It
also has $10 million of convertible bonds, with par value of $1,000 and a
conversion price of $50. How do I calculate diluted shares outstanding?
This gets confusing because of the different units involved. First, note that these
convertible bonds are in-the-money because the companys share price is $100,
but the conversion price is $50. So we count them as additional shares rather than
debt.
Next, we need to divide the value of the convertible bonds $10 million by the
par value $1,000 to figure out how many individual bonds there are:
$10 million / $1,000 = 10,000 convertible bonds.
Next, we need to figure out how many shares this number represents. The
number of shares per bond is the par value divided by the conversion price:
$1,000 / $50 = 20 shares per bond.
So we have 200,000 new shares (20 * 10,000) created by the convertibles, giving us
1.2 million diluted shares outstanding.

25 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide
We do not use the Treasury Stock Method with convertibles because we do not
pay the company anything to convert the convertibles it just becomes an
option automatically once the share price exceeds the conversion price.
4. Lets say that a company has 10,000 shares outstanding and a current share
price of $20.00. It also has 100 options outstanding at an exercise price of $10.00.
It also has 50 Restricted Stock Units (RSUs) outstanding.
Finally, it also has 100 convertible bonds outstanding, at a conversion price of
$10.00 and par value of $100.
What is its Diluted Equity Value?
First, lets tackle the options outstanding: since they are in-the-money (exercise
price is lower than the share price), we assume that they get exercised and that
100 new shares get created.
The company receives 100 * $10.00, or $1,000, in proceeds. Its share price is $20.00
so it can repurchase 50 shares with these proceeds. Overall, there are 50
additional shares outstanding now (100 new shares 50 repurchased).
The 50 RSUs get added as if they were common shares, so now theres a total of
100 additional shares outstanding.
For the convertible bonds, the conversion price of $10.00 is below the companys
current share price of $20.00, so conversion is allowed.
We divide the par value by the conversion price to see how many new shares per
bond get created:
$100 / $10.00 = 10 new shares per bond
Since there are 100 convertible bonds outstanding, we therefore get 1,000 new
shares (100 convertible bonds * 10 new shares per bond).

26 / 27

Investment Banking Interview Guide

Access the Rest of the Interview Guide

In total, there are 1,100 additional shares outstanding. The diluted share count is
therefore 11,100.
The Diluted Equity Value is 11,100 * $20.00, or $222,000.
5. This same company also has Cash of $10,000, Debt of $30,000, and
Noncontrolling Interests of $15,000. What is its Enterprise Value?
You subtract the Cash, add the Debt, and then add Noncontrolling Interests:
Enterprise Value = $222,000 $10,000 + $30,000 + $15,000 = $257,000.

27 / 27