0% found this document useful (0 votes)

172 views

Ansys Tutorial

ANSYS CFD - Post Tutorial

Uploaded by

ajaygautam

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

172 views

Ansys Tutorial

ANSYS CFD - Post Tutorial

Uploaded by

ajaygautam

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 62

ANSYS CFD-Post Standalone: Tutorials

ANSYS, Inc.
Southpointe
275 Technology Drive
Canonsburg, PA 15317
[email protected]
http://www.ansys.com
(T) 724-746-3304
(F) 724-514-9494

Release 12.0
April 2009
ANSYS, Inc. is
certified to ISO
9001:2008.

Copyright and Trademark Information

2009 ANSYS, Inc. All rights reserved. Unauthorized use, distribution, or duplication is prohibited.
ANSYS, ANSYS Workbench, Ansoft, AUTODYN, EKM, Engineering Knowledge Manager, CFX, FLUENT, HFSS and any
and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of
ANSYS, Inc. or its subsidiaries in the United States or other countries. ICEM CFD is a trademark used by ANSYS, Inc. under
license. CFX is a trademark of Sony Corporation in Japan. All other brand, product, service and feature names or trademarks
are the property of their respective owners.

Disclaimer Notice
THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION INCLUDE TRADE SECRETS AND ARE
CONFIDENTIAL AND PROPRIETARY PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. The
software products and documentation are furnished by ANSYS, Inc., its subsidiaries, or affiliates under a software license
agreement that contains provisions concerning non-disclosure, copying, length and nature of use, compliance with exporting
laws, warranties, disclaimers, limitations of liability, and remedies, and other provisions. The software products and documentation
may be used, disclosed, transferred, or copied only in accordance with the terms and conditions of that software license agreement.
ANSYS, Inc. is certified to ISO 9001:2008.
ANSYS UK Ltd. is a UL registered ISO 9001:2000 company.

U.S. Government Rights

For U.S. Government users, except as specifically granted by the ANSYS, Inc. software license agreement, the use, duplication,
or disclosure by the United States Government is subject to restrictions stated in the ANSYS, Inc. software license agreement
and FAR 12.212 (for non-DOD licenses).

Third-Party Software
See the legal information in the product help files for the complete Legal Notice for ANSYS proprietary software and third-party
software. If you are unable to access the Legal Notice, please contact ANSYS, Inc.
Published in the U.S.A.

Table of Contents
1. Introduction to the Tutorials ........................................................................................................................... 1
2. Fluid Flow and Heat Transfer in a Mixing Elbow ................................................................................................ 3
Create a Working Directory ............................................................................................................... 4
Launch ANSYS CFD-Post ................................................................................................................ 5
Display the Solution in ANSYS CFD-Post ............................................................................................ 8
View and Check the Mesh ............................................................................................................... 11
View Simulation Values using the Function Calculator .......................................................................... 14
Become Familiar with the Viewer Controls ......................................................................................... 15
Create an Instance Reflection ........................................................................................................... 17
Show Velocity on the Symmetry Plane ............................................................................................... 18
Show Flow Distribution in the Elbow ................................................................................................. 20
Show the Vortex Structure ................................................................................................................ 23
Compare a Contour Plot to the Display of a Variable on a Boundary ........................................................ 24
Chart Temperature vs. Distance ........................................................................................................ 26
Create a Table to Show Mixing ......................................................................................................... 30
Review and Modify a Report ............................................................................................................ 32
Create a Custom Variable and Animate the Display ............................................................................... 32
Loading and Comparing the Results to Those in a Refined Mesh ............................................................. 34
Save Your Work ............................................................................................................................. 36
Generated Files ............................................................................................................................. 38
3. Turbo Postprocessing .................................................................................................................................. 39
Problem Description ....................................................................................................................... 39
Create a Working Directory .............................................................................................................. 40
Launching ANSYS CFD-Post .......................................................................................................... 41
Displaying the Solution in ANSYS CFD-Post ...................................................................................... 45
Initializing the Turbomachinery Components ...................................................................................... 46
Comparing the Blade-to-Blade, Meridional, and 3D Views ..................................................................... 47
Displaying Contours on Meridional Isosurfaces ................................................................................... 49
Displaying a 360-Degree View ......................................................................................................... 50
Calculating and Displaying Values of Variables .................................................................................... 50
Displaying the Inlet to Outlet Chart ................................................................................................... 53
Generating and Viewing Turbo Reports .............................................................................................. 54

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

iii

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

List of Figures
2.1. Problem Specification ................................................................................................................................. 4
2.2. The Hexahedral Grid for the Mixing Elbow ................................................................................................... 12
2.3. Orientation Control Cursor Types ................................................................................................................ 16
2.4. Right-click Menus Vary by Cursor Position ................................................................................................... 17
2.5. Velocity on the Symmetry Plane .................................................................................................................. 19
2.6. Velocity on the Symmetry Plane (Enhanced Contrast) ..................................................................................... 20
2.7. Vector Plot of Velocity ............................................................................................................................... 21
2.8. Streamlines of Turbulence Kinetic Energy ..................................................................................................... 22
2.9. Absolute Helicity Vortex ............................................................................................................................ 24
2.10. Boundary Pressure vs. a Contour Plot of Pressure ......................................................................................... 26
2.11. Chart of Output Temperatures at the Outlet .................................................................................................. 28
2.12. Chart of Output Temperatures at Two Locations ........................................................................................... 30
2.13. Comparing Contour Plots of Temperature on Two Mesh Densities ................................................................... 35
2.14. Displaying Differences in Contour Plots of Temperature on Two Mesh Densities ................................................ 36
3.1. Problem Specification ............................................................................................................................... 40

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Chapter 1. Introduction to the Tutorials

The tutorials are designed to introduce the capabilities of ANSYS CFD-Post. The following tutorials are available:

Fluid Flow and Heat Transfer in a Mixing Elbow (p. 3)

Turbo Postprocessing (p. 39)

For information on the CFD-Post interface (menu bar, tool bar, workspaces, and viewers), see CFD-Post Graphical
Interface (p. 45).

Using Help
To invoke the help browser, from the menu bar select Help > Master Contents.
You may also use context-sensitive help, which is provided for many of the object editors and other parts of the
interface. To invoke the context-sensitive help for a particular editor or other feature, ensure that the feature is active,
place the mouse pointer over it, then press F1. Not every area of the interface supports context-sensitive help. If
context-sensitive help is not available for the feature of interest, select Help > Master Contents and try using the
search or index features in the help browser.

Tip
For more information on the help system, see Accessing Online Help (p. 9).

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Chapter 2. Fluid Flow and Heat Transfer in

a Mixing Elbow
This tutorial illustrates how to use ANSYS CFD-Post to visualize a three-dimensional turbulent fluid flow and heat
transfer problem in a mixing elbow. The mixing elbow configuration is encountered in piping systems in power
plants and process industries. It is often important to predict the flow field and temperature field in the area of the
mixing region in order to properly design the junction.
This tutorial demonstrates how to do the following:

Create a Working Directory (p. 4)

Launch ANSYS CFD-Post (p. 5)

Display the Solution in ANSYS CFD-Post (p. 8)

Save Your Work (p. 36)

Generated Files (p. 38)

Problem Description
The problem to be considered is shown schematically in Figure 2.1, Problem Specification (p. 4). A cold fluid
at 20 C flows into the pipe through a large inlet and mixes with a warmer fluid at 40 C that enters through a smaller
inlet located at the elbow. The pipe dimensions are in inches, but the fluid properties and boundary conditions are
given in SI units. The Reynolds number for the flow at the larger inlet is 50,800, so the flow has been modeled as
being turbulent.

Note
This tutorial is derived from an existing ANSYS FLUENT case. The combination of SI and Imperial
units is not typical, but follows an ANSYS FLUENT example.
Because the geometry of the mixing elbow is symmetric, only half of the elbow is modeled.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Create a Working Directory

Figure 2.1. Problem Specification

Create a Working Directory

CFD-Post uses a working directory as the default location for loading and saving files for a particular session or
project. Before you run a tutorial, use your operating system's commands to create a working directory where you
can store your sample files and results files.
By working in that new directory, you prevent accidental changes to any of the sample files.

Copying the CAS and CDAT Files

Sample files are provided so that you can begin using CFD-Post immediately. You may find sample files in a variety
of places, depending on which products you have:

If you have CFD-Post or ANSYS CFX, sample files are in <CFXROOT>\examples, where <CFXROOT> is
the installation directory for ANSYS CFX. Copy the CAS and CDAT files (elbow1.cas.gz,
elbow1.cdat.gz, elbow3.cas.gz, and elbow3.cdat.gz) to your working directory.

If you have ANSYS FLUENT 12:

Download cfd-post-elbow.zip from the ANSYS FLUENT User Services Center

(www.fluentusers.com) to your working directory. This file can be found by using the Documentation link
on the ANSYS FLUENT product page.

Extract the CAS files and CDAT files (elbow1.cas.gz, elbow1.dat.gz, elbow3.cas.gz and
elbow3.dat.gz) from cfd-post-elbow.zip to your working directory.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Launch ANSYS CFD-Post

Note

These tutorials are prepared on a Windows system. The screen shots and graphic images in the
tutorials may be slightly different than the appearance on your system, depending on the operating
system or graphics card.

The case name is derived from the name of the results file that you load with the final extension
removed. Thus, if you load elbow1.cdat.gz the case name will be elbow1.cdat; if you load
elbow1.cdat, the case name will be elbow1. The case names used in this tutorial are elbow1 and
elbow3.

Launch ANSYS CFD-Post

Before you start CFD-Post, set the working directory. The procedure for setting the working directory and starting
CFD-Post depends on whether you will launch CFD-Post standalone, from the ANSYS CFX Launcher, from ANSYS
Workbench, or from ANSYS FLUENT:

To run CFD-Post standalone, from the Start menu, right-click All Programs > ANSYS 12.0 > Fluid Dynamics
> CFD-Post and select Properties. Type the path to your working directory in the Start in field and click OK,
then click All Programs > ANSYS 12.0 > Fluid Dynamics > CFD-Post to launch CFD-Post.

To run ANSYS CFX Launcher

Start the ANSYS CFX Launcher.

You can run the ANSYS CFX Launcher in any of the following ways:

On Windows:

From the Start menu, go to All Programs > ANSYS 12.0 > Fluid Dynamics > CFX.

In a DOS window that has its path set up correctly to run ANSYS CFX, enter cfx5launch
(otherwise, you will need to type the full pathname of the cfx command, which will be something
similar to C:\Program Files\ANSYS Inc\v120\CFX\bin).

On UNIX, enter cfx5launch in a terminal window that has its path set up to run ANSYS CFX (the
path will be something similar to /usr/ansys_inc/v120/CFX/bin).

Select the Working Directory (where you copied the sample files).

Click the CFD-Post 12.0 button.

ANSYS Workbench
1.

Start ANSYS Workbench.

From the menu bar, select File > Save As and save the project file to the directory that you want to be the
working directory.

Open the Component Systems toolbox and double-click Results. A Results system opens in the Project
Schematic.

Right-click on the A2 Results cell and select Edit. CFD-Post opens.

ANSYS FLUENT
1.

Click the ANSYS FLUENT icon (

) in the ANSYS program group to open ANSYS FLUENT Launcher.

ANSYS FLUENT Launcher allows you to decide which version of ANSYS FLUENT you will use, based
on your geometry and on your processing capabilities.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Launch ANSYS CFD-Post

Ensure that the proper options are enabled.

ANSYS FLUENT Launcher retains settings from the previous session.
a.

Select 3D from the Dimension list.

Select Serial from the Processing Options list.

Make sure that the Display Mesh After Reading and Embed Graphics Windows options are enabled.

Make sure that the Double-Precision option is disabled.

Tip
You can also restore the default settings by clicking the Default button.
3.

Set the working path to the directory created when you unzipped cfd-post-elbow.zip.
a.

Click Show More.

Enter the path to your working directory for Working Directory by double-clicking the text box and
typing.
Alternatively, you can click the browse button (
) next to the Working Directory text box and
browse to the directory, using the Browse For Folder dialog box.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Launch ANSYS CFD-Post

Click OK to launch ANSYS FLUENT.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Display the Solution in ANSYS CFD-Post

Select File > Read > Case & Data and choose the elbow1.cas.gz file.

Select File > Export to CFD-Post.

In the Select Quantities list that appears, highlight the following variables:

Static Pressure

Density

X Velocity

Y Velocity

Z Velocity

Static Temperature

Turbulent Kinetic Energy (k)

Click Write.
CFD-Post starts with the tutorial file loaded.

In the ANSYS FLUENT application, select File > Read > Case & Data and choose the elbow3.cas.gz
file.

10. On the Export to CFD-Post dialog, clear the Open CFD-Post option and click Write. Accept the default
name and click OK to save the files.
11. Close ANSYS FLUENT.

Display the Solution in ANSYS CFD-Post

In the steps that follow, you will visualize various aspects of the flow for the solution using CFD-Post. You will:

Prepare the case and set the viewer options

View the mesh and check it by using the Mesh Calculator

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Prepare the Case and Set the Viewer Options

View simulation values using the Function Calculator

Become familiar with the 3D Viewer controls

Create an instance reflection

Show fluid velocity on the symmetry plane

Create a vector plot to show the flow distribution in the elbow

Create streamlines to show the flow distribution in the elbow

Show the vortex structure

Use multiple viewports to compare a contour plot to the display of a variable on a boundary

Chart the changes to temperature at two places along the pipe

Create a table to show mixing

Review and modify a report

Create a custom variable and cause the plane to move through the domain to show how the values of a custom
variable change at different locations in the geometry

Compare the results to those in a refined mesh

Save your work

Create an animation of a plane moving through the domain.

Prepare the Case and Set the Viewer Options

If you have launched CFD-Post from ANSYS FLUENT, proceed to the next step. For all other situations, load
the simulation from the data file (elbow1.cdat.gz) from the menu bar by selecting File > Load Results.
In the Load Results File dialog, select elbow1.cdat.gz and click Open.

If you see a pop-up that discusses Global Variables Ranges, it can be ignored. Click OK.
The mixing elbow appears in the 3D Viewer in an isometric orientation. The wireframe appears in the view
and there is a check mark beside User Location and Plots > Wireframe in the Outline tree view; the check
mark indicates that the wireframe is visible in the 3D Viewer.

Optionally, set the viewer background to white:

Right-click on the viewer and select Viewer Options.

In the Options dialog, select CFD-Post > Viewer.

Set:

Background > Color Type to Solid.

Background > Color to white. To do this, click the bar beside the Color label to cycle through 10
basic colors. (Click the right-mouse button to cycle backwards.) Alternatively, you can choose any
color by clicking
to the right of the Color option.

Text Color to black (as above).

Edge Color to black (as above).

Click OK to have the settings take effect.

Experiment with rotating the object by clicking on the arrows of the triad in the 3D Viewer. This is the
triad:

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Prepare the Case and Set the Viewer Options

In the picture of the triad above, the cursor is hovering in the area opposite the positive Y axis, which
reveals the negative Y axis.

Note
The viewer must be in viewing mode for you to be able to click on the triad. You set viewing
mode or select mode by clicking the icons in the viewer toolbar:

When you have finished experimenting, click the cyan (ISO) sphere in the triad to return to the isometric
view of the object.
4.

Set CFD-Post to display objects in the units you want to see. These display units are not necessarily the same
types as the units in the results files you load; however, for this tutorial you will set the display units to be the
same as the solution units for consistency. As mentioned in the Problem Description (p. 3), the solution units
are SI, except for the length, which is measured in inches.
a.

Right-click on the viewer and select Viewer Options.

Tip
The Options dialog is where you set your preferences; see Setting Preferences with the Options
Dialog (p. 125) for details.
b.

In the Options dialog, select Common > Units.

Notice that System is set to SI. In order to be able to change an individual setting (length, in this case)
from SI to imperial, set System to Custom. Now set Length to in (inches) and click OK.

Note

The display units you set are saved between sessions and projects. This means that you can load
results files from diverse sources and always see familiar units displayed.

You have set only length to inches; volume will still be reported in meters. To change volume
as well, in the Options dialog, select Common > Units, then click More Units to find the full
list of settings.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

View and Check the Mesh

There are two ways to view the mesh: you can use the wireframe for the entire simulation or you can view the mesh
for a particular portion of the simulation.
To view the mesh for the entire simulation:
1.

Right-click on the wireframe in the 3D Viewer and select Show surface mesh to display the mesh.

Click the Z axis of triad in the viewer to get a side view of the object. (Remember that the 3D Viewer toolbar
has to be in viewing mode for you to be able to select the triad elements.)

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

View and Check the Mesh

Figure 2.2. The Hexahedral Grid for the Mixing Elbow

In the Outline tree view, double-click on User Locations and Plots > Wireframe to display the wireframe's
editor.

Tip
Click on the Details of Wireframe editor and press F1 to see help about the Wireframe object.
4.

On the Wireframe Details view, click Defaults and Apply to restore the original settings.

To view the mesh for a particular portion of the simulation (in this case, the wall):
1.

In the Outline tree view, select the check box beside Cases > elbow1 > fluid > wall, then double-click wall
to edit its properties in its Details view.

In the Details view:

On the Render tab, clear the Show Faces check box.

Select the Show Mesh Lines check box.

Ensure that Edge Angle is set to 0 [degree].

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

View and Check the Mesh

Click Apply.
The mesh appears and is similar to the mesh shown by the previous procedure, except that the mesh is
shown only on the wall.

Now, clear the display of the wall wireframe. In the Details view:
i.

Clear the Render > Show Mesh Lines check box.

ii.

Select the Show Faces check box.

iii. Click Apply.

The wall reappears.
3.

In the Outline tree view, clear the check box beside Cases > elbow1 > fluid > wall.

Note
The rest of the tutorial assumes that the wall is not visible or, if it is visible, that it is showing faces, not
lines.
To check the mesh:
1.

Select the Calculators tab at the top of the workspace area, then double-click Mesh Calculator. The Mesh
Calculator appears.

Using the drop-down arrow beside the Function field, select a function such as Maximum Face Angle.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

View Simulation Values using the Function Calculator

Click Calculate. The results of the calculation appear.

Repeat the previous steps for other functions, such as Mesh Information.

View Simulation Values using the Function Calculator

You can view values in the simulation by using the Function Calculator:
1.

In the Calculators view, double-click Function Calculator. The Function Calculator appears.

In the Function field, select a function to evaluate. This example uses minVal.

In the Location field, select fluid.

Beside the Variable field, click More Variables

and select Volume in the Variable Selector dialog box.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Become Familiar with the Viewer Controls

Click OK.
5.

Click Calculate to see the result of the calculation of the minimum value of element volumes found in the
fluid region. Note that even though the length of the elbow is measured in inches, the volume is returned in
cubic meters.

Become Familiar with the Viewer Controls

Optionally, take a few moments to become familiar with the viewer controls. These icons switch the mouse from
selecting items in the viewer to controlling the orientation and display of the view. First, the sizing controls:
1.

Click Zoom Box

Click and drag a rectangular box over the geometry.

Release the mouse button to zoom in on the selection.

The geometry zoom changes to display the selection at a greater resolution.

Click Fit View

to re-center and re-scale the geometry.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Become Familiar with the Viewer Controls

Now, the rotation functions:
on the viewer toolbar.

Click Rotate

Click and drag repeatedly within the viewer to test the rotation of the geometry. Notice how the mouse cursor
changes depending on where you are in the viewer, particularly near the edges:

Figure 2.3. Orientation Control Cursor Types

The geometry rotates based on the direction of movement. If the mouse cursor has an axis (which happens
around the edges), the object rotates around the axis shown in the cursor. The axis of rotation is through the
pivot point, which defaults to be in the center of the object.

Tip
See Mouse Button Mapping (p. 93) for details about other features that you can access with the mouse.
Now explore orientation options:
1.

Right-click a blank area in the viewer and select Predefined Camera > View Towards -X.

Right-click a blank area in the viewer and select Predefined Camera > Isometric View (Z Up).

Click the Z axis of triad in the viewer to get a side view of the object.

Click the three axes in the triad in turn to see the vector objects in all three planes; when you are done, click
the cyan (ISO) sphere.
Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Create an Instance Reflection

Now explore the differences between the orienting controls you just used and select mode.
to enter select mode.

Click

Hover over one of the wireframe lines and notice that the cursor turns into a box.

Click a wireframe line and notice that the Details view for the wireframe appears.

Right-click away from a wireframe line and then again on a wireframe line. Notice how the menu changes:

Figure 2.4. Right-click Menus Vary by Cursor Position

In the Outline tree view, select the elbow1 > fluid > wall check box; the outer wall of the elbow becomes
solid. Notice that as you hover over the colored area, the cursor again becomes a box, indicating that you can
perform operations on that region. When you right-click on the wall, a new menu appears.

Click on the triad and notice that you cannot change the orientation of the viewer object. (The triad is available
only in viewing mode, not select mode.)

In the Outline tree view, clear the elbow1 > fluid > wall check box; the outer wall of the elbow disappears.

Create an Instance Reflection

Create an instance reflection on the symmetry plane so that you can see the complete case:
1.

With the 3D Viewer toolbar in viewing mode, click on the cyan (ISO) sphere in the triad. This will make it
easy to see the instance reflection you are about to create.

Right-click on one of the wireframe lines on the symmetry plane. (If you were in select mode, the mouse cursor
would have a box image added when you are on a valid line. As you are in viewing mode there is no change
to the cursor to show that you are on a wireframe line, so you may see the general right-click menu, as opposed
to the right-click menu for the symmetry plane.) See Figure 2.4, Right-click Menus Vary by Cursor
Position (p. 17).

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Show Velocity on the Symmetry Plane

From the right-click menu, select Reflect/Mirror. If you see a dialog prompting you for the direction of the
normal, choose the Z axis. The mirrored copy of the wireframe appears.

Tip
If the reflection you create is on an incorrect axis, click the Undo

toolbar icon twice.

Show Velocity on the Symmetry Plane

Create a contour plot of velocity on the symmetry plane:
1.

From the menu bar, select Insert > Contour. In the Insert Contour dialog, accept the default name, and click
OK.

In the Details view for Contour 1, set the following:

Tab

Setting

Value

Geometry

Locations

symmetrya

Variable

Velocityb

Notice how the available locations are highlighted in the viewer as you move the mouse over the objects in the Locations drop-down
list. You could also create a slice plane at a location of your choice and define the contour to be at that location.
b
Velocity is just an example of a variable you can use. For a list of ANSYS FLUENT variables and their CFX equivalents, see ANSYS
FLUENT Field Variables Listed by Category (p. 79).

Click Apply. The contour plot for velocity appears and a legend is automatically generated.

The coloring of the contour plot may not correspond to the colors on the legend because the viewer has a light
source enabled by default. There are several ways to correct this:

You can change the orientation of the objects in the viewer.

You can experiment with changing the position of the light source by holding down the Ctrl key and
dragging the cursor with the right mouse button.

You can disable lighting for the contour plot. To disable lighting, click on the Render tab and clear the
check box beside Lighting, then click Apply.

Disabling the lighting is the method that provides you with the most flexibility, so change that setting now.
5.

Click on the Z on the triad to better orient the geometry (the 3D Viewer must be in viewing mode, not select
mode, to do this).

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Show Velocity on the Symmetry Plane

Figure 2.5. Velocity on the Symmetry Plane

Improve the contrast between the contour regions:

On the Render tab, select Show Contour Lines and click the plus sign to view more options.

Select Constant Coloring.

Set Color Mode to User Specified and set Line Color to black (if necessary, click on the bar beside
Line Color until black appears).

Click Apply.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Show Flow Distribution in the Elbow

Figure 2.6. Velocity on the Symmetry Plane (Enhanced Contrast)

Hide the contour plot by clearing the check box beside User Locations and Plots > Contour 1 in the Outline
tree view.

Tip
You can also hide an object by right-clicking on its name in the Outline tree view and selecting
Hide.

Show Flow Distribution in the Elbow

Create a vector plot to show the flow distribution in the elbow:
1.

From the menu bar, select Insert > Vector.

Click OK to accept the default name. The Details view for the vector appears.

On the Geometry tab, set Domains to fluid and Locations to symmetry.

Click Apply.

On the Symbol tab, set Symbol Size to 4.

Click Apply and notice the changes to the vector plot.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Show Flow Distribution in the Elbow

Figure 2.7. Vector Plot of Velocity

Change the vector plot so that the vectors are colored by temperature:
a.

In the Details view for Vector 1, click on the Color tab.

Set the Mode to Variable. The Variable field becomes enabled.

Click on the down arrow

Click Apply and notice the changes to the vector plot.

beside the Variable field to set it to Temperature.

Optionally, change the vector symbol. In the Details view for the vector, go to the Symbol tab and set Symbol
to Arrow3D. Click Apply.

Hide the vector plot by right-clicking on a vector symbol in the plot and selecting Hide.

CFD-Post uses the Variable setting on the Geometry tab to determine where to place objects to best illustrate
changes in that variable. Once the object has been put in place, you can have CFD-Post measure other variables
along those streamlines by using the Variable setting on the Color tab. In this example you will create streamlines
to show the flow distribution by velocity, then recolor those streamlines to show turbulent kinetic energy:
1.

From the menu bar select Insert > Streamline. Accept the default name and click OK.

In the Details view for Streamline 1, choose the points from which to start the streamlines. Click on the down
arrow
beside the Start From drop-down widget to see the potential starting points. Hover over each point
and notice that the area is highlighted in the 3D Viewer. It would be best to show how streamlines from both

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Show Flow Distribution in the Elbow

inlets interact, so, to make a multi-selection, click the Location editor icon
appears.

. The Location Selector dialog

In the Location Selector dialog, hold down the Ctrl key and click velocity inlet 5 and velocity
inlet 6 to highlight both locations, then click OK.

Click Preview Seed Points to see the starting points for the streamlines.

On the Geometry tab, ensure that Variable is set to Velocity.

Click on the Color tab and make the following changes:

Set the Mode to Variable. The Variable field becomes enabled.

Set the Variable to Turbulence Kinetic Energy.

Set Range to Local.

Click Apply. The streamlines show the flow of massless particles through the entire domain.

Figure 2.8. Streamlines of Turbulence Kinetic Energy

Select the check box beside Vector 1. The vectors appear, but are largely hidden by the streamlines. To correct
this, highlight Streamline 1 in the Outline tree view and press Delete. The vectors are now clearly visible,
but the work you did to create the streamlines is gone. Click the Undo icon

to restore Streamline 1.

Hide the vector plot and the streamlines by clearing the check boxes beside Vector 1 and Streamline 1 in the
Outline tree view.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Show the Vortex Structure

CFD-Post displays vortex core regions to enable you to better understand the processes in your simulation. In this
example you will look at helicity method for vortex cores, but in your own work you would use the vortex core
method that you find most instructive.
1.

In the Outline tree view:

Under User Locations and Plots, clear the check box for Wireframe.

Under Cases > elbow1 > fluid, select the check box for wall.

Double-click on wall to edit its properties. On the Render tab, set Transparency to 0.75 and click
Apply.
This makes the pipe easy to see while also making it possible to see objects inside the pipe.

From the menu bar, select Insert > Location > Vortex Core Region and click OK to accept the default name.

In the Details view for Vortex Core Region 1 on the Geometry tab, set Method to Absolute Helicity
and Level to .01. On the Render tab, set Transparency to 0.2. Click Apply.
The absolute helicity vortex that is displayed is created by a mixture of effects from the walls, the curve in the
main pipe, and the interaction of the fluids. If you had chosen the vorticity method instead, wall effects would
dominate.

On the Color tab, click on the colored bar in the Color field until the bar is green. Click Apply.
This improves the contrast between the vortex region and the blue walls.

Right-click in the 3D Viewer and select Predefined Camera > Isometric View (Y up).

In the Outline tree view, select the check box beside Streamline 1. This shows how the streamlines are affected
by the vortex regions.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Compare a Contour Plot to the Display of a Variable on a Boundary

Figure 2.9. Absolute Helicity Vortex

Clear the check boxes beside wall, Streamline 1 and Vortex Core Region 1. Select the check box beside
Wireframe.

Compare a Contour Plot to the Display of a Variable on a

Boundary
A contour plot with color bands has discrete colored regions while the display of a variable on a locator (such as a
boundary) shows a finer range of color detail by default. The instructions that follow will illustrate a variable at the
outlet and create a contour plot that displays the same variable at that same location.
1.

To do the comparison, split the 3D Viewer into two viewports by using the Viewport Layout toolbar in the 3D
Viewer toolbar:

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Compare a Contour Plot to the Display of a Variable on a Boundary

Right-click in both viewports and select Predefined Camera > View Towards -Y.

In the Outline tree view, double-click on pressure outlet 7 (which is under elbow1 > fluid). The
Details view of pressure outlet 7 appears.

Click in the View 1 viewport.

In the Details view for pressure outlet 7 on the Color tab:

Change Mode to Variable.

Ensure Variable is set to Pressure.

Ensure Range is set to Local.

Click Apply. The plot of pressure appears and the legend shows a smooth spectrum that goes from blue
to red. Notice that this happens in both viewports; this is because Synchronize visibility in displayed views
is enabled.

Click Synchronize visibility in displayed views

to disable this feature.

Now, add a contour plot at the same location:

Click in View 2 to make it active; the title bar for that viewport becomes highlighted.

In the Outline tree view, clear the check box beside fluid > pressure outlet 7.

From the menu bar, select Insert > Contour.

Accept the default contour name and click OK.

In the Details view for the contour, ensure that the Locations setting is pressure outlet 7 and the
Variable setting is Pressure.

Set Range to Local.

Click Apply. The contour plot for pressure appears and the legend shows a spectrum that steps through 10
levels from blue to red.

Compare the two representations of pressure at the outlet. Pressure at the Outlet is on the left and a Contour
Plot of pressure at the Outlet is on the right:

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Chart Temperature vs. Distance

Figure 2.10. Boundary Pressure vs. a Contour Plot of Pressure

Enhance the contrast on the contour bands:

In the Outline tree view, right-click on User Locations and Plots > Contour 2 and select Edit.

In the Details view for the contour, click on the Render tab, expand the Show Contour Lines area, and
select the Constant Coloring check box. Then set the Color Mode to User Specified. Click Apply.

Click on the Labels tab and select Show Numbers. Click Apply.

10. Explore the viewer synchronization options:

In View 1, click the cyan (ISO) sphere in the triad so that the two viewports show the elbow in different
orientations.

In the 3D Viewer toolbar, click the Synchronize camera in displayed views icon
take the camera orientation of the active viewport.

Clear the Synchronize camera in displayed views

icon and click on the Z arrow head of the triad in
View 1. The object again moves independently in the two viewports.

In the 3D Viewer toolbar, click the Synchronize visibility in displayed views icon

In the Outline tree view, right-click on fluid > wall and select Show. The wall becomes visible in both
viewports. (Synchronization applies only to events that take place after you enable the synchronize visibility
function.)

. Both viewports

11. When you are done, use the viewport controller to return to a single viewport. The synchronization icons
disappear.

Chart Temperature vs. Distance

We want to show temperature vs. distance at the outlet of the pipe. We will create a chart to do that, but the chart
requires a line where we can sample values.
Release 12.0 - 2009 ANSYS, Inc. All rights reserved.
26

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Chart Temperature vs. Distance

In the Outline tree view in the User Location and Plots area, right-click and select Hide All, then click in
the check boxes to enable the Default Legend View 1 and the Wireframe.

Click the cyan (ISO) sphere in the triad so that you can again see the full elbow.

Create a line at the centerline of the outlet:

On the menu bar, select Insert > Location > Line. In the Insert Line dialog, accept the default name
and click OK.

Accept the default values and click Apply. A yellow line appears near the inside of the elbow.

In the Details view for Line 1, set the following:

Tab

Setting

Value

Geometry

Point 1a

4, 7.999, 0.001b

Point 2

8, 7.999, 0.001

Line Type

Cutc

Mode

Variable

Temperature

Range

Local

Line Width

Color

Render
a

The units are taken from the 3D Viewer options setting, which you can access from the menu bar by selecting Edit > Options.
The Z value ensures that the line unambiguously passes through the domain.
c
This setting constrains the line to be within the object.
b

d.
4.

Click Apply.

Create a chart that samples the points on Line 1:

On the menu bar, select Insert > Chart. In the Insert Chart dialog, accept the default name and click
OK.

In the Details view for Chart 1, on the General tab set Title to Output Temperatures.

On the Data Series tab, right-click in the empty list box and select New, then set Name to Temperature
at Line 1 and Location to Line 1.

On the X Axis tab, set Variable to X.

On the Y Axis tab, set Variable to Temperature.

Click Apply. A chart similar to the following appears in the Chart Viewer:

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Chart Temperature vs. Distance

Figure 2.11. Chart of Output Temperatures at the Outlet

Tip
The Chart Viewer tab is at the bottom of the viewers area.
Now add a second line to the simulation and to the chart so that you can compare temperature distributions at two
points:
1.

Click on the 3D Viewer tab so that you can see the line you are about to create.

Create a new line midway towards the outlet:

On the menu bar, select Insert > Location > Line. In the Insert Line dialog, accept the default name
and click OK.

In the Details view for Line 2, set the following:

Tab

Setting

Value

Geometry

Point 1a

4, 1.25, 0.001b

Point 2

8, 1.25, 0.001

Line Type

Cutc

Mode

Variable

Temperature

Color

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Chart Temperature vs. Distance

Tab
Render

Setting

Value

Range

Local

Line Width

c.
3.

Click Apply. A second line appears near the middle of the top section of pipe.

Add Line 2 to the existing chart:

Right-click on Outline > Report > Chart 1 and select Edit.

In the Details view for Chart 1, click on the Data Series tab, then click the New icon
appears.

. A new series

Select Series 2 and set the following:

Tab

Setting

Value

Series

Name

Temperature at Line 2

Location

Line 2

Click Apply. A chart similar to the following appears in the Chart Viewer:

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Create a Table to Show Mixing

Figure 2.12. Chart of Output Temperatures at Two Locations

The temperatures at Line 2 are higher, which shows that less mixing has occurred than at Line 1.

Create a Table to Show Mixing

You can create a table to show how values change at different locations, provided that the locations have been
defined. In this section you will create three planes along the mixing region and measure the temperatures on those
planes. You will then create a table and define functions that show temperature minimums and maximums, and the
differences between those values.
1.

In the 3D Viewer, ensure that only the wireframe is visible.

Click on the +Z axis on the triad to get a side-view of the elbow, then rotate the top of the elbow slightly
towards you. This will make it easier for you to see the temperature planes that you will create.

From the tool bar, select Location > Plane. In the Insert Plane dialog, type Table Plane 1 and click OK.

In the Details view for Table Plane 1, set the following values:
Tab

Field

Geometry Domains

Value
fluid

Definition > Method ZX Plane

Color

Definition > Y

-6.04

Mode

Variable
Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Create a Table to Show Mixing

Tab

Render

Field

Value

Variable

Temperature

Range

Local

Lighting

(clear)

Click Apply.

Right-click on Table Plane 1 and select Duplicate. The Duplicate dialog appears.
In the Duplicate dialog, accept the default name Table Plane 2 and click OK.
In the Outline view, double-click on Table Plane 2 and on the Geometry tab change Definition > Y to -0.55.
Click Apply.

Repeat the previous step, duplicating Table Plane 2 to make Table Plane 3 and changing Definition
> Y to 2.18. Click Apply.

Repeat the previous step, duplicating Table Plane 3 to make Table Plane 4 and changing Definition
> Y to 5.04. Click Apply.

Now, create a table:

From the menu bar, select Insert > Table. Accept the default table name and click OK. The Table Viewer
opens.

Type in the following headings:

1
3.

Distance to Outlet

Min. Temperature

Max. Temperature

Difference

For the Distance to Outlet column, create an equation that gives the distance from the outlet (which is at the
8 mark). Click on cell A2, then in the Table Viewer's Insert bar, select Function > CFD-Post > minVal. In
the cell definition field you see =minVal()@, which will be the base of the equation. With the cursor between
the parentheses, type Y. Move the cursor after the @ sign and either type Table Plane 1 or select Insert
> Location > Table Plane 1. The expression you have created gives the value of Y for Table Plane 1. To
determine the distance of Table Plane 1 from the outlet, complete the equation as follows, being careful to add
8[in]- to the beginning of the equation to set the location of the outlet:
=8[in]-minVal(Y)@Table Plane 1
When you click away from cell A2, the equation is solved as 1.404e+01 [in].

Complete the rest of the table by entering the following cell definitions:
A

Distance to Outlet

Min. Temperature

Max. Temperature

Difference

=8[in]-minVal(Y)@Table =minVal(T)@Table
Plane 1
Plane 1

=maxVal(T)@Table
Plane 1

=maxVal(T)@Table
Plane 1minVal(T)@Table Plane
1

=8[in]-minVal(Y)@Table =minVal(T)@Table
Plane 2
Plane 2

=maxVal(T)@Table
Plane 2

=maxVal(T)@Table
Plane 2minVal(T)@Table Plane
2

=8[in]-minVal(Y)@Table =minVal(T)@Table
Plane 3
Plane 3

=maxVal(T)@Table
Plane 3

=maxVal(T)@Table
Plane 3minVal(T)@Table Plane
3

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Review and Modify a Report

=8[in]-minVal(Y)@Table =minVal(T)@Table
Plane 4
Plane 4

=maxVal(T)@Table
Plane 4

=maxVal(T)@Table
Plane 4minVal(T)@Table Plane
4

=8[in]-minVal(Y)@pressure =minVal(T)@pressure
outlet 7
outlet 7

=maxVal(T)@pressure =maxVal(T)@pressure
outlet 7
outlet 7minVal(T)@pressure
outlet 7

As you complete the table, notice that the minimum temperature values stay constant, but the maximum values
decrease as mixing occurs.

Note
The sixth row determines the values at the outlet, rather than on a plane you defined.
5.

The default format for cell data is appropriate for some variables, but it is not appropriate here. Click on cell
A2, then while depressing the Shift key, click in the lower-right cell (D6). Click on the Number Formatting
icon in the Table Viewer toolbar. In the Cell Formatting dialog, set Precision to 2, change Scientific to
Fixed, and click OK.

Review and Modify a Report

As you work, ANSYS CFD-Post automatically updates a report, which you can see in the Report Viewer. At any
time you can publish the report to an HTML file. In this section you will add a picture of the elbow and produce an
HTML report:
1.

Click on the Report Viewer tab at the bottom of the viewer to view the current report.

In the Outline tree view, double-click on the Report > Title Page. In the Title field on the Content tab of the
Details of Report Title Page, type: Analysis of Heat Transfer in a Mixing Elbow

Click Apply, then Refresh Preview to update the contents of the Report Viewer.

In the Outline tree view, ensure that only User Location and Plots > Contour 1, Default Legend View 1,
and Wireframe are visible, then double-click Contour 1. On the Geometry tab, set Variable to Temperature
and click Apply.

On the menu bar, select Insert > Figure. The Insert Figure dialog appears. Accept the default name and click
OK.

In the Outline tree view, double-click Report > Figure 1. In the Caption field, type Temperature on
the Symmetry Plane and click Apply.

Click on the 3D Viewer, then click on the cyan (ISO) sphere in the triad.

Click on the Report Viewer.

On the top frame of the Report Viewer, click the Refresh icon
picture of the mixing elbow at the end of the report.

. The report is updated with a

10. Optionally, click Publish to create an HTML version of the report. In the Publish Report dialog, click OK.
The report is written to Report.htm in your working directory.
11. Right-click in the Outline view and select Hide All, then select Wireframe.

Tip
For more information about reports, see Report (p. 58).

Create a Custom Variable and Animate the Display

In this section you will generate an expression using the CFX Expression Language (CEL), which you can then use
in CFD-Post in place of a numeric value. You will then associate the expression with a variable, which you will
Release 12.0 - 2009 ANSYS, Inc. All rights reserved.
32

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Create a Custom Variable and Animate the Display

also create. Finally, you will create a plane that displays the new variable, then move the plane to see how the values
for the variable change.
1.

Define a custom expression for the dynamic head formula (rho|V|^2)/2 as follows:
a.

On the tab bar at the top of the workspace area, select Expressions. Right-click in the Expressions area
and select New.

In the New Expression dialog, type: DynamicHeadExp

Click OK.

In the Definition area, type in this definition:

Density * abs(Velocity)^2 / 2
where:

Density is a variable

abs is a CEL function (abs is unnecessary in this example, it simply illustrates the use of a CEL
function)

Velocity is a variable

Tip
You can learn which predefined functions, variables, expression, locations, and constants are
available by right-clicking in the Definition area.
e.
2.

Click Apply.

Associate the expression with a variable (as the plane you define in the next step can display only variables):
a.

On the tab bar at the top of the workspace area, select Variables. Right-click in the Variables area and
select New.

In the New Variable dialog, type: DynamicHeadVar

Click OK.

In the Details view for DynamicHeadVar, click the drop-down arrow beside Expression and choose
DynamicHeadExp. Click Apply.

Create a plane and animate it:

Click on the 3D Viewer tab.

Right-click on the wireframe and select Insert > YZ Plane.

If you see a dialog that asks in which direction you want the normal to point, choose the direction
appropriate for your purposes.
A plane that maps the distribution of the default variable (Pressure) appears.

On the Color tab, set Variable to DynamicHeadVar. On the Render tab, clear Lighting.Click Apply.
The plane now maps the dynamic head distribution.

In the 3D Viewer in with the mouse cursor in select mode, click on the plane and drag it to various places
in the object to see how the location changes the DynamicHeadVar values displayed.

Right-click on the plane and select Animate. The Animation dialog appears and the plane moves through
the entire domain, displaying changes to the DynamicHeadVar values as it moves.

On the Animation dialog, click the Stop icon

, then click Close.

Tip
You can define multiple planes and animate them concurrently. First, stop any animations currently
running, then create a new plane. To animate both planes, hold down Ctrl to select multiple planes
on the Animation dialog and press the Play icon

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Loading and Comparing the Results to Those in a Refined Mesh

In the upper-left corner of the 3D Viewer, click the down arrow beside Figure 1 and change it to View 1.

In the Outline view, right-click beside User Locations and Plots and select Hide All, then select Wireframe
and Default Legend View 1 to make them visible.

Loading and Comparing the Results to Those in a Refined Mesh

To this point you have been working with a coarse mesh. In this section you will compare the results from that mesh
to those from a refined mesh:
1.

Select File > Load Results. The Load Results File dialog appears

On the Load Results File dialog, select Keep current cases loaded and keep the other settings unchanged.

Select elbow3.cdat.gz (or elbow3.cdat) and click Open.

In the 3D Viewer, there are now two viewports: in the title bar for View 1 you have elbow1, and in View 2
you have elbow3. In the Outline tree view under Cases you have elbow1 and elbow3; all boundaries associated
with each case are listed separately and can be controlled separately. You also have a new entry: Cases > Case
Comparison.

In the Toolbar, select Synchronize camera in displayed views

If the two cases are not oriented in the same way, clear the Synchronize camera in displayed views
and then select it again.

icon

Examine the operation of CFD-Post when the two views are not synchronized and when they are synchronized:
1.

In the viewer toolbar, clear Synchronize visibility in displayed views

With the focus in View 1, select Insert > Contour and create a contour of pressure on pressure outlet 7 that
displays values in the local range.
Note that the contour appears only in View 1. When visibility is not synchronized, changes you make to User
Location and Plots settings apply only to the currently active view.

In either view (while in viewing mode), click on the Z axis on the triad. Both views show their cases from the
perspective of the Z axis.

In the viewer toolbar, select Synchronize visibility in displayed views

With the focus on the view that contains elbow3, select Insert > Contour. Accept the default name and click
OK. Define a contour that displays temperature on the symmetry plane:
Tab

Setting

Value

Geometry Locations symmetry

Variable Temperature
Range
Render

Local

Lighting (clear)

Click Apply.
Note that the contour appears in both views. You can see the differences between the coarse and refined meshes:

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Loading and Comparing the Results to Those in a Refined Mesh

Figure 2.13. Comparing Contour Plots of Temperature on Two Mesh Densities

You can now compare the differences between the coarse and refined meshes:
1.

In the Outline tree view, double-click Cases > Case Comparison.

In the Case Comparison Details view, select Case Comparison Active and click Apply. The differences
between the values in the two cases appear in a third view. Click the Z axis of the triad to restore the orientation
of the views.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Save Your Work

Figure 2.14. Displaying Differences in Contour Plots of Temperature on Two Mesh

Densities

Now, revert to a single view that shows the original case:

To remove the Difference view, clear Case Comparison Active and click Apply.

To remove the refined mesh case, in the Outline tree view, right-click elbow3 and select Unload.

Save Your Work

When you began this tutorial, you loaded a solver results file. When you save the work you have done in CFD-Post,
you save the current state of CFD-Post into a CFD-Post State file (.cst).
1.

How you save your work depends on whether you are running CFD-Post standalone or from within ANSYS
Workbench:

From CFD-Post standalone:

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Save Your Work

From the menu bar, select File > Save State.

This operation saves the expression, custom variable, and the settings for the objects in a .cst file
and saves the state of the animation in a .can file. The .cas.gz and .cdat.gz files remain
unchanged.

A Warning dialog asks if you want to save the animation state. Click OK.

Optionally, confirm the state file's contents: close the current file from the menu bar by selecting File
> Close (or press Ctrl+W) then reload the state file (select File > Load State and choose the file that
you saved in step 1.)

From ANSYS Workbench:

From the CFD-Post menu bar, select File > Quit. ANSYS Workbench saves the state file automatically.

In the ANSYS Workbench Project Schematic, double-click on the Results cell. CFD-Post re-opens
with the state file loaded.

Save a picture of the current state of the simulation: In the Outline view, show Contour 1. With the focus in
the 3D Viewer, click Save Picture
from the tool bar. In the Save Picture dialog, click Save. A PNG file
of the current state of the viewer is saved to <casename>.png (elbow1.png) in your working directory.

Tip
To learn about the options on the Save Picture dialog, see Save Picture Command (p. 113).
3.

You can recreate the animation you made in the previous section and save it to a file:
a.

Click on the cyan (ISO) sphere in the triad to orient the elbow to display Plane 1.

In the Outline view, clear Contour 1 and show Plane 1.

Right-click on Plane 1 in the 3D Viewer and select Animate. The Animation dialog appears and the
plane moves through the entire domain.

Click the stop icon

If necessary, display the full animation control set by clicking

.
.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Generated Files

The Repeat is set to infinity; change the value to 1 by clicking the infinity button. The Repeat field
becomes enabled and by default is set to one.

Enable Save Movie to save the animation to the indicated file.

Click Play the animation

The plane moves through one cycle.

You can now go to your working directory and play the animation file in an appropriate viewer.
4.

Click Close to close the Animation dialog.

Close CFD-Post: from the tool bar select File > Quit. If prompted, you may save your changes.

Generated Files
As you worked through this tutorial you generated the following files in your working directory (default names are
given):

elbow1.cst, the state file, and elbow1.can, the animation associated with that state file

elbow1.wmv, the animation

elbow1.png, a picture of the contents of the 3D Viewer

Report.htm, the report.

Release 12.0 - 2009 ANSYS, Inc. All rights reserved.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Chapter 3. Turbo Postprocessing

This tutorial demonstrates the turbomachinery postprocessing capabilities of CFD-Post.
In this example, you will read ANSYS FLUENT case and data files (without doing any calculations) and perform
a number of turbomachinery-specific postprocessing operations.
This tutorial demonstrates:

Displaying the Solution in ANSYS CFD-Post (p. 45)

Initializing the Turbomachinery Components (p. 46)

Comparing the Blade-to-Blade, Meridional, and 3D Views (p. 47)

Displaying Contours on Meridional Isosurfaces (p. 49)

Displaying a 360-Degree View (p. 50)

Calculating and Displaying Values of Variables (p. 50)

Displaying the Inlet to Outlet Chart (p. 53)

Generating and Viewing Turbo Reports (p. 54)

Problem Description
This tutorial considers the problem of a centrifugal compressor shown schematically in Figure 3.1, Problem
Specification (p. 40). The model comprises a single 3D sector of the compressor to take advantage of the
circumferential periodicity in the problem. The flow of air through the compressor is simulated and the postprocessing
capabilities of CFD-Post are used to display realistic, full 360-degree images of the solution obtained.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Create a Working Directory

Figure 3.1. Problem Specification

Create a Working Directory

Copying the Sample Files

Sample files are provided so that you can begin using CFD-Post immediately. You may find sample files in a variety
of places, depending on which products you have:

If you have CFD-Post or ANSYS CFX, sample files are in <CFXROOT>/examples, where <CFXROOT> is
the installation directory for ANSYS CFX. Copy the sample files (turbo.cdat.gz and turbo.cas.gz)
to your working directory.

If you have ANSYS FLUENT 12:

Download cfd-post-turbo.zip from the ANSYS FLUENT User Services Center

(www.fluentusers.com) to your working directory. This file can be found by using the Documentation link
on the ANSYS FLUENT product page.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Launching ANSYS CFD-Post

Extract the CAS files and DAT files (turbo.cas.gz and turbo.dat.gz) from
cfd-post-turbo.zip to your working directory.

Note

The case name is derived from the name of the results file that you load with the final extension
removed. Thus, if you load turbo.cdat.gz the case name will be turbo.cdat; if you load turbo.cdat,
the case name will be turbo. The case name used in this tutorial is turbo.

Launching ANSYS CFD-Post

Before you start CFD-Post, set the working directory. The procedure for setting the working directory and starting
CFD-Post depends on whether you will run CFD-Post standalone, from the ANSYS CFX Launcher, from ANSYS
Workbench, or from ANSYS FLUENT:

To run ANSYS CFX Launcher

Start the ANSYS CFX Launcher.

You can run the CFX Launcher in any of the following ways:

On Windows:

From the Start menu, go to Start menu, go to All Programs > ANSYS 12.0 > Fluid Dynamics
> CFX.

In a DOS window that has its path set up correctly to run CFX, enter cfx5launch (otherwise,
you will need to type the full pathname of the cfx command, which will be something similar to
C:\Program Files\ANSYS Inc\v120\CFX\bin).

On UNIX, enter cfx5launch in a terminal window that has its path set up to run CFX (the path will
be something similar to /usr/ansys_inc/v120/CFX/bin).

Select the Working Directory (where you copied the sample files).

Click the CFD-Post 12.0 button.

ANSYS Workbench
1.

Start ANSYS Workbench.

From the menu bar, select File > Save As and save the project file to the directory that you want to be the
working directory.

Open the Component Systems toolbox and double-click Results. A Results system opens in the Project
Schematic.

Right-click on the A2 Results cell and select Edit. CFD-Post opens.

ANSYS FLUENT
1.

Click the ANSYS FLUENT icon (

) in the ANSYS program group to open ANSYS FLUENT Launcher.

ANSYS FLUENT Launcher allows you to decide which version of ANSYS FLUENT you will use, based
on your geometry and on your processing capabilities.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Launching ANSYS CFD-Post

Ensure that the proper options are enabled.

ANSYS FLUENT Launcher retains settings from the previous session.
1.

Select 3D from the Dimension list.

Select Serial from the Processing Options list.

Make sure that the Display Mesh After Reading and Embed Graphics Windows options are enabled.

Make sure that the Double-Precision option is disabled.

Tip
You can also restore the default settings by clicking the Default button.
3.

Set the working path to the directory created when you unzipped cfd-post-turbo.zip.
1.

Click Show More.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Launching ANSYS CFD-Post

Click OK to launch ANSYS FLUENT.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Launching ANSYS CFD-Post

Select File > Read > Case & Data and choose the turbo.cas.gz file.

Select File > Export to CFD-Post.

In the dialog that appears, highlight the variables required by turbo reports, which are below:

ANSYS FLUENT Variables Required by Turbo Reports

Density

Static Pressure

Total Pressure

X Velocity

Y Velocity

Z Velocity

Static Temperature

Total Temperature

Enthalpy

Total Enthalpy

Specific Heat (Cp)

Entropy

Rothalpy

Mach Number

Click Write.
CFD-Post starts with the tutorial file loaded.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Displaying the Solution in ANSYS CFD-Post

In the steps that follow, you will visualize various aspects of the flow for the case using CFD-Post. You will:

Prepare the case and set the viewer options

Initialize the turbomachinery components

Compare the blade-to-blade, meridional, and 3D views

Compare contours on meridional isosurfaces

Calculate and display the values of variables

Display a 360-degree view

Display the inlet-to-outlet chart

Generate and view a Turbo report

Prepare the Case and Set the Viewer Options

If CFD-Post has not been started from ANSYS FLUENT, load the CDAT file (turbo.cdat.gz) from the
menu bar by selecting File > Load Results. In the Load Results File dialog, select turbo.cdat.gz and
click Open.

If you see a pop-up that discusses Global Variables Ranges, it can be ignored. Click OK.
The turbo blade appears in the viewer in an isometric orientation. The Wireframe appears in the 3D Viewer
and there is a check mark beside Wireframe in the Outline workspace; the check mark indicates that the
wireframe is visible in the 3D Viewer.

Set CFD-Post to display the units you want to see. These display units are not necessarily the same types as
the units in the results files you load; however, for this tutorial you will set the display units to be the same as
the solution units.
1.

Right-click on the viewer and select Viewer Options.

Tip
The Options dialog is where you set your preferences; see Setting Preferences with the Options
Dialog (p. 125) for details.
2.

In the Options dialog, select Common > Units.

Set System to SI and click OK.

Note
The display units you set are saved between sessions and projects. This means that you can load
results files from diverse sources and always see familiar units displayed.
4.

Double-click Wireframe in the Outline workspace to see the Details view. To display the mesh, set Edge
Angle to 0 degrees and click Apply. The Edge Angle is the angle between one edge of a mesh face and its
neighboring face. Setting an edge angle in CFD-Post defines a minimum angle for drawing parts of the surface
mesh. When you set a small angle, the mesh becomes visible.

Tip
With the mouse focus on CFD-Post and the mouse over the Details of Wireframe editor, press F1
to see help about the Wireframe object.
On the Wireframe Details view, click Defaults and Apply to restore the original settings.
5.

Optionally, set the viewer background to white:

Right-click on the viewer and select Viewer Options.

In the Options dialog, select CFD-Post > Viewer.

Set:

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Initializing the Turbomachinery Components

Background > Color Type to Solid.

icon to the right of the Color option.

Text Color to black (as above).

Edge Color to black (as above).

Click OK to have the settings take effect.

Initializing the Turbomachinery Components

Before you can start using the Turbo workspace features, you need to initialize the components of the loaded case
(such as hub, blade, periodics, and so on). Among other things, initialization generates span, a (axial), r (radial),
and Theta coordinates for each component.
You need to initialize FLUENT files manually (automatic initialization is available only for CFX files produced
by the Turbo wizard in CFX-Pre). To initialize the components:
1.

Click on the Turbo tab in the upper-left pane of the CFD-Post window. The Turbo workspace appears as does
a Turbo initialization dialog that offers to auto-initialize all turbo components. Click No.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Comparing the Blade-to-Blade, Meridional, and 3D Views

On the Definition tab, the regions of the geometry are listed in the Turbo Regions areas. However, not all
regions are listed; correct this as follows:
to the right of the Hub region.

Click Location editor

Hold down the Ctrl key and in the Location Selector select wall diffuser hub, wall hub, and
wall inlet hub.

Click OK. The Hub field now lists all three hub locations.

Repeat the previous steps for the Shroud region, selecting wall diffuser shroud, wall inlet
shroud, and wall shroud.

Repeat the previous steps for the Blade region, selecting only wall blade.

Repeat the previous steps for the Inlet region, selecting only inlet.

Repeat the previous steps for the Outlet region, selecting only outlet.

Repeat the steps for the Periodic 1 region, selecting periodic.33, periodic.34, and
periodic.35.
You do not need to initialize the periodic.*shadow regions; the periodic.* nodes provide the
information that the turbo reports require.

Click the Instancing tab.

Ensure that the # of Copies is set to 1.

ii.

Ensure that Axis Definition from File is cleared, that Method is set to Principal Axis, and
that Axis is set to Z.

iii. Set # of Passages to 20.

Click Initialize. This generates variables that you will use later to create reports.

Double-click Initialization at the top of the Turbo tree view. The Initialization editor appears.

Click the Calculate Velocity Components button. This generates velocity variables that you will also
use in your reports.

The initialization process has created a variety of plots automatically; you will access these from the Turbo tab in
the sections that follow.

Comparing the Blade-to-Blade, Meridional, and 3D

Views
To compare the Blade-to-Blade, Meridional, and 3D Views:

In the Turbo workspace, select the Three Views option at the bottom of the Initialization editor. In the 3D
Viewer you can see the Turbo Initialization View, the Blade to Blade View, and the Meridional View.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Comparing the Blade-to-Blade, Meridional, and 3D Views

The CFX Blade to Blade View is equivalent to the ANSYS FLUENT 2D contour on a spanwise surface. By
default, the variable shown is Pressure. To change this to velocity and to make the image more like the default
ANSYS FLUENT equivalent:
1.

In the Blade to Blade View, right-click on the colored area shown in the viewport and select Edit.

In the Details view for the Blade-to-Blade Plot, change the Plot Type from Color to Contour (this changes
the continuous gradation found in Color to the discrete color bands found in Contour).

Change Variable to Velocity.

Change the # of Contours to 21.

Click Apply.

The CFX Meridional View is equivalent to the ANSYS FLUENT "contour averaged in the circumferential direction.
To make the image more like the default ANSYS FLUENT equivalent:
1.

In the Meridional View, right-click on the colored area shown in the viewport and select Edit.

In the Details view for the Meridional Plot, change the Plot Type from Color to Contour.

Change the # of Contours to 21.

Click Apply.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Displaying Contours on Meridional Isosurfaces

You can display contours on meridional isosurfaces that you define. In this example you will define six meridional
isosurfaces and display the pressure distribution on each.
1.

Return to the original orientation of the case:

In the Tree view, double-click Plots and select Single View.

Double-click 3D View.

From the menu bar select Insert > Location > Isosurface and accept the default name.

Set the following values on the Details view for the isosurface:
Tab

Field

Value

Geometry

Domains

fluid

Variable

Linear BA Streamwise
Locationa

Value

.01

Mode

Variable

Pressure

Range

User Specified

Min

72800 [Pa]

Max

186000 [Pa]

Lighting

(clear)

Color

Render
a

Click the Location Editor

to access this variable.

Click Apply to define the isosurface.

Repeat the previous steps for the following Geometry values:

.2, .4, .6, .8, and .99

Tip
To save time, right-click on Isosurface 1 in the Tree view and select Duplicate. In this way you
need change only the Geometry > Value setting. Be sure to click Apply after defining each new
isosurface.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Displaying a 360-Degree View

Note
You can set locator variables other than Linear BA (Blade Aligned) Streamwise Location. For
example, edit Isosurface 5 and change Linear BA Streamwise Location to M Length
Normalized to see how the contour changes. The locator-variable options are described in Turbo
Charts (p. 241) in ANSYS CFD-Post Standalone: User's Guide.

Displaying a 360-Degree View

To display a 360 view of the turbomachinery:
1.

In the Outline view, right-click and select Hide All. The 3D Viewer is cleared.

Under User Locations and Plots, select the check box beside Wireframe.

Under Cases > turbo, double-click on fluid to edit that domain.

On the Instancing tab, set # of Copies to 20.

Clear Axis Definition from File and ensure that the Method is set to Principal Axis and the Axis is set to Z.

Click Apply.

If necessary, click the Fit View

icon so that you can see the whole case.

Calculating and Displaying Values of Variables

You can calculate the values of variables at locations in the case and display these results in a table. First, use the
Function Calculator to see how to create a function.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Calculating and Displaying Values of Variables

From the menu bar, select Tools > Function Calculator. The Calculators tab appears with the Function
Calculator displayed.

Use the Function Calculator to calculate the mass flow average of pressure at the inlet as follow:
a.

Use the Function drop-down arrow to select massFlowAve.

Use the Location drop-down arrow to select inlet.

Use the Variable drop-down arrow to select Pressure.

At the bottom of the Function Calculator select Show equivalent expression.

Click Calculate and the expression and results appear:

The Function Calculator not only makes it easy to create and calculate a function, it also enables you
to see the syntax for functions, which you will use in the subsequent steps.
3.

To display functions like this in a table, click on the Table Viewer tab (at the bottom of the viewer area). The
Table Viewer appears.

In the tool bar at the top of the Table Viewer, click New Table
Inlet and Outlet Values and click OK.

Type the following text to make cell headings:

In cell B1: Inlet

In cell C1: Outlet

In cell A2: Mass Flow

In cell A3: Average Pressure

. The New Table dialog appears. Type in

Now, create functions:

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Calculating and Displaying Values of Variables

Click in cell B2, then in the Table Viewer tool bar select Function > CFD-Post > massFlow. The
definition =massFlow()@ appears.

With the text cursor after the @ symbol, click Location > inlet.

Press Enter; the value of the mass flow at the inlet appears.

Repeat the above steps for cell C2, but use Location > outlet.

For cell B3, select Function > CFD-Post > massFlowAve. With the text cursor between the parentheses,
select Variable > Pressure. With the text cursor after the @ symbol, click Location > inlet. Press Enter;
the value of the mass flow average of pressure at the inlet appears.

Repeat the previous step for cell C3, but use Location > outlet.

Your table should be similar to this:

Format the cells to make the table easier to read.

Click in cell A1 and, while holding down Shift, click in cell C1. Now the operations you perform will
apply to A1 through C1.

Click
to make the heading font bold, then click
a background color to those cells.

Click in cell A2 and, while holding down Shift, click in cell A3. Click
bold, then click

to center the heading text. Click

to apply

to make the row description

to right-align the text.

Manually resize the cells.

Your table should be similar to this:

Click on the Report Viewer tab and then click Refresh in the Report Viewer toolbar. The table data appears
at the bottom of the report.

Note
The background color that you applied in the Table Viewer does not appear in the Report Viewer.
However, when you click Publish to create an HTML version of the report, the color will be visible
in that report.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Displaying the Inlet to Outlet Chart

In CFX, displaying the Inlet to Outlet chart is equivalent to displaying averaged XY plots in ANSYS FLUENT. To
display the Inlet to Outlet chart:
1.

In the Turbo workspace's Turbo Charts area, double-click on Inlet to Outlet.

Now, change the chart to compare temperature to streamwise location (the latter being called meridional
location in ANSYS FLUENT) and make the chart look more like the ANSYS FLUENT default:
a.

Set the following:

Domains

fluid

Samples/Comp 60
Y Axis
b.

Temperature

Click Apply. The chart appears:

Click on the Report Viewer tab at the bottom of the viewer area.

In the Report Viewer toolbar, click the Refresh button. The Inlet to Outlet Chart appears in the User Data
section of the report.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Generating and Viewing Turbo Reports

Tip
You can also explore the other Turbo Charts:

Blade Loading

Circumferential

Hub to Shroud

Generating and Viewing Turbo Reports

Turbo reports give performance results, component data summary tables, meanline 1D charts, stage plots, and
spanwise loading charts for the blade.

Note
The Turbo report is generated from the values set when you initialized the case, so if there were any
changes required to those values, you would make them now and run the initialization procedure again.
For this tutorial, that will not be necessary.
To generate a Turbo report:
1.

Create a new variable that the report expects (which would be available with CFX results files for rotating
machinery applications, but which is not available from ANSYS FLUENT files).
a.

From the tool bar, click Variable

. The Insert Variable dialog appears.

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

Generating and Viewing Turbo Reports

In the Expression field, type Radius * abs(omega) / 1 [rad] and click Apply. This expression
calculates the angular speed (in units of length per unit time) as a product of the local radius and the
rotational speed.
. This ensures that the graphics will not be truncated in the

In the 3D Viewer's tool bar, click Fit View

report you are about to generate.

In the Outline tree view, right-click on Report and select Report Templates. The Report Templates dialog
appears.

Select an appropriate report template; in this case, Centrifugal Compressor Report. (The Centrifugal
Compressor Report is an improved version of the Centrifugal Compressor Rotor Report.)
Click Load. The Report Templates dialog disappears and you can watch the report's progress in the status
bar in the bottom-right corner of CFD-Post.

Note
A dialog appears that warns that hybrid values do not exist and that conservative values will be
used. This is expected behavior when using data loaded from ANSYS FLUENT. An error about
Mach Number in Stn Frame is also mentioned; this prevents a line in the report from appearing.
Click OK.
When the report has been generated, there are new entries in the Outline tree view under Report.
5.

Under User Locations and Plots, double-click on fluid Instance Transform. This is an instance
transform generated by the report to facilitate showing two blades in the figures that show blade-to-blade views.

Ensure # of Passages is set to 20 and click Apply.

Click on the Expressions tab. Double-click on the expression fluid Components in 360 to edit it. Change the
definition to 20 and click Apply.

To view the Turbo report:

Click on the Report Viewer tab. The turbo report appears.

Optionally, you can remove pieces from the report by clearing the appropriate check boxes in the Report
section of the Outline tree. When you have made your selections, return to the Report Viewer tab and click
Refresh (in the Report Viewer toolbar). The edited version of the turbo report appears.

To produce an HTML version of the report that you can share with others, click Publish (at the top of the
viewer area). The report is saved in a file name of your choosing in your working directory (by default).

Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.

First-Year Polish. Pierwszy Rok Języka Polskiego by Swan Oscar E.
100% (2)
First-Year Polish. Pierwszy Rok Języka Polskiego by Swan Oscar E.
598 pages
SPF ELITE Brochure-2022 Unlocked
No ratings yet
SPF ELITE Brochure-2022 Unlocked
28 pages
The WingMakers
100% (2)
The WingMakers
308 pages
Heat Transfer From Heating Coil PDF
100% (1)
Heat Transfer From Heating Coil PDF
28 pages
Grfthyex 1
No ratings yet
Grfthyex 1
2 pages
ANSYS Fluent Tutorial Guide
No ratings yet
ANSYS Fluent Tutorial Guide
11 pages
FLUENT Tutorial
No ratings yet
FLUENT Tutorial
31 pages
Using Software Gambit 2.0 and Fluent 6.0 For Simulation of Heat Mass Transfer Problems
No ratings yet
Using Software Gambit 2.0 and Fluent 6.0 For Simulation of Heat Mass Transfer Problems
11 pages
CFX-Intro 14.5 WS07 Centrifugal-Pump
100% (1)
CFX-Intro 14.5 WS07 Centrifugal-Pump
24 pages
CFD PPT 191117005
No ratings yet
CFD PPT 191117005
21 pages
Tut 17 Species
100% (1)
Tut 17 Species
20 pages
Fluent GetStart 19.3 L01.0 Intro To ANSYS
No ratings yet
Fluent GetStart 19.3 L01.0 Intro To ANSYS
8 pages
CFD Studies of Combustion in Diesel Engine
100% (1)
CFD Studies of Combustion in Diesel Engine
4 pages
Came 1998
100% (1)
Came 1998
18 pages
Get Gas Turbines Internal Flow Systems Modeling Bijay Sultanian PDF Ebook With Full Chapters Now
100% (5)
Get Gas Turbines Internal Flow Systems Modeling Bijay Sultanian PDF Ebook With Full Chapters Now
62 pages
CFX-Intro 14.5 L11 Transient PDF
No ratings yet
CFX-Intro 14.5 L11 Transient PDF
22 pages
By Sijal Ahmed: Turbomachinery Modelling in Fluent
100% (1)
By Sijal Ahmed: Turbomachinery Modelling in Fluent
20 pages
CFD Multiphase Modeling of Fluidized Bed Using Fluent Software
No ratings yet
CFD Multiphase Modeling of Fluidized Bed Using Fluent Software
44 pages
CAD CAM CIM Intro PDF
No ratings yet
CAD CAM CIM Intro PDF
59 pages
3D Modeling Axial Fan
No ratings yet
3D Modeling Axial Fan
20 pages
By Sijal Ahmed: Turbomachinery Modelling in Fluent
No ratings yet
By Sijal Ahmed: Turbomachinery Modelling in Fluent
20 pages
ANSYS Mechanical Users Guide
No ratings yet
ANSYS Mechanical Users Guide
1,824 pages
Manual Book Multiphase Fluent
No ratings yet
Manual Book Multiphase Fluent
66 pages
MCE 488: Introduction To Computational Fluid Dynamics: CFD Applications
No ratings yet
MCE 488: Introduction To Computational Fluid Dynamics: CFD Applications
1 page
ASME Pump Design Course
0% (1)
ASME Pump Design Course
2 pages
Resources Links: Online Resources To Learn CFD
No ratings yet
Resources Links: Online Resources To Learn CFD
1 page
Gas Turbine Auxiliaries
No ratings yet
Gas Turbine Auxiliaries
11 pages
FLUENT Tutorial 5 - Blower
No ratings yet
FLUENT Tutorial 5 - Blower
26 pages
Fluent-Intro 16.0 L03 BoundaryConditions PDF
No ratings yet
Fluent-Intro 16.0 L03 BoundaryConditions PDF
51 pages
2.1 Integer Order Modeling and Control
No ratings yet
2.1 Integer Order Modeling and Control
17 pages
Pump Save User Manual
No ratings yet
Pump Save User Manual
14 pages
Reliability
No ratings yet
Reliability
8 pages
Strategies To Embrace The Digital Transformation
No ratings yet
Strategies To Embrace The Digital Transformation
26 pages
VIZIYA Scheduling Whitepaper Oracle
No ratings yet
VIZIYA Scheduling Whitepaper Oracle
10 pages
Electromagnetic Force Coupling Electric Machines
No ratings yet
Electromagnetic Force Coupling Electric Machines
48 pages
Pump Vibration Analysis
No ratings yet
Pump Vibration Analysis
11 pages
Engineering Data Users Guide
No ratings yet
Engineering Data Users Guide
72 pages
Dhillon Bs Applied Reliability Usability and Quality For Eng
100% (1)
Dhillon Bs Applied Reliability Usability and Quality For Eng
250 pages
Virtual Reality in Construction Industry
No ratings yet
Virtual Reality in Construction Industry
11 pages
ME-458 Turbomachinery: Muhammad Shaban Lecturer Department of Mechanical Engineering
50% (2)
ME-458 Turbomachinery: Muhammad Shaban Lecturer Department of Mechanical Engineering
113 pages
Ansys Fluids
No ratings yet
Ansys Fluids
232 pages
Ansys Fluent
No ratings yet
Ansys Fluent
17 pages
CFX Transient
No ratings yet
CFX Transient
19 pages
MOdeling A Cavitating Pump ANSYS
No ratings yet
MOdeling A Cavitating Pump ANSYS
18 pages
Assignment 1
100% (1)
Assignment 1
2 pages
WS 1 Nelson Vaugh Rotor
No ratings yet
WS 1 Nelson Vaugh Rotor
24 pages
Fluent-Intro 17.0 Module09 BestPractices PDF
No ratings yet
Fluent-Intro 17.0 Module09 BestPractices PDF
43 pages
Solving A Port Flow Simulation in IC Engine (Fluent) System
No ratings yet
Solving A Port Flow Simulation in IC Engine (Fluent) System
47 pages
Practical Lubrication for Industrial Facilities 2nd ed., Completely rev. and updated Edition Heinz P. Bloch all chapter instant download
100% (1)
Practical Lubrication for Industrial Facilities 2nd ed., Completely rev. and updated Edition Heinz P. Bloch all chapter instant download
71 pages
03 Plant Design and Economics Heuristics R02
No ratings yet
03 Plant Design and Economics Heuristics R02
124 pages
Cfturbo-Pumps en PDF
No ratings yet
Cfturbo-Pumps en PDF
2 pages
Pump Life Cycle Cost 8 Energy Cost Reduction
No ratings yet
Pump Life Cycle Cost 8 Energy Cost Reduction
31 pages
ANSYS Fluent Meshing Using Mosaic Elements.
No ratings yet
ANSYS Fluent Meshing Using Mosaic Elements.
8 pages
Acoustic Enclosure Optimization For A Higher Capacity Diesel Generator Set Using Statistical Energy Analysis (SEA) Based Approach
No ratings yet
Acoustic Enclosure Optimization For A Higher Capacity Diesel Generator Set Using Statistical Energy Analysis (SEA) Based Approach
5 pages
Analyzis by Simulation of In-Cylinder Tumble Motion
No ratings yet
Analyzis by Simulation of In-Cylinder Tumble Motion
8 pages
CALTEC SJP / Ejector For Production Boosting and Flare Gas Capture (Article Oil Field Technology)
No ratings yet
CALTEC SJP / Ejector For Production Boosting and Flare Gas Capture (Article Oil Field Technology)
3 pages
Candidate Handbook
No ratings yet
Candidate Handbook
18 pages
ANSYS Rotordynamics Material PDF
No ratings yet
ANSYS Rotordynamics Material PDF
28 pages
3 Convection
No ratings yet
3 Convection
44 pages
William R. Herguth, Thomas M. Warne, Editors-Turbine Lubrication in The 21st Century (ASTM Special Technical Publication, 1407) (2001) PDF
No ratings yet
William R. Herguth, Thomas M. Warne, Editors-Turbine Lubrication in The 21st Century (ASTM Special Technical Publication, 1407) (2001) PDF
114 pages
Nasa FMEA Presentation PDF
No ratings yet
Nasa FMEA Presentation PDF
28 pages
API STD 617 Interview Questions and Answers: The Guide for Compressor and Pump Engineers
From Everand
API STD 617 Interview Questions and Answers: The Guide for Compressor and Pump Engineers
Chetan Singh
No ratings yet
ANSYS Workbench 2021 R1: A Tutorial Approach, 4th Edition
From Everand
ANSYS Workbench 2021 R1: A Tutorial Approach, 4th Edition
Prof. Sham Tickoo
No ratings yet
ISO 31-0 Standard Requirements
From Everand
ISO 31-0 Standard Requirements
Gerardus Blokdyk
No ratings yet
Dolomite Mining NGT 4apr2014
No ratings yet
Dolomite Mining NGT 4apr2014
25 pages
Mining Guidelines Manual For EIA Preparation
No ratings yet
Mining Guidelines Manual For EIA Preparation
167 pages
Design of Bins and Feeders
100% (1)
Design of Bins and Feeders
55 pages
Rainwater Harvest To Storage!!!!!!!!!!!!!!!
No ratings yet
Rainwater Harvest To Storage!!!!!!!!!!!!!!!
30 pages
Eia 091211
No ratings yet
Eia 091211
2 pages
Fugitive Emission Guidelines For Cement Plants
No ratings yet
Fugitive Emission Guidelines For Cement Plants
10 pages
PCR Simulación
No ratings yet
PCR Simulación
2 pages
Circuit Thry
No ratings yet
Circuit Thry
34 pages
F568M
No ratings yet
F568M
9 pages
Floral Design: What Is The History of Floral Design and What Are Some Techniques Used by Florists?
100% (1)
Floral Design: What Is The History of Floral Design and What Are Some Techniques Used by Florists?
20 pages
E1T 4-16 MANUAL Rev1.24 Usa VR 8-28-17
No ratings yet
E1T 4-16 MANUAL Rev1.24 Usa VR 8-28-17
15 pages
G6 Mapeh PT Q2
No ratings yet
G6 Mapeh PT Q2
8 pages
WebMethods Deployer User's Guide 7.0 - Software AG Documentation
No ratings yet
WebMethods Deployer User's Guide 7.0 - Software AG Documentation
88 pages
Assignment - Ashik, Ashikur Rahman - 18-37261-1
No ratings yet
Assignment - Ashik, Ashikur Rahman - 18-37261-1
5 pages
Arcfm™ Server: Flexible Web Environment For Arcfm Solution
No ratings yet
Arcfm™ Server: Flexible Web Environment For Arcfm Solution
4 pages
Lan
100% (8)
Lan
19 pages
Report With Synopsys
No ratings yet
Report With Synopsys
217 pages
Functions Paper 1 1 1993: Past Year Questions Functions Additional Mathematics SPM
100% (1)
Functions Paper 1 1 1993: Past Year Questions Functions Additional Mathematics SPM
8 pages
IMC100 Series V1.0.0 Datasheet - 20210402
No ratings yet
IMC100 Series V1.0.0 Datasheet - 20210402
6 pages
SEN Micro Project
No ratings yet
SEN Micro Project
17 pages
Peoplesoft - Component Interface: Prasad Raju. G
No ratings yet
Peoplesoft - Component Interface: Prasad Raju. G
30 pages
NN unit_1
No ratings yet
NN unit_1
27 pages
Tawk
No ratings yet
Tawk
21 pages
AcuCloud - Use Case and Functions
No ratings yet
AcuCloud - Use Case and Functions
15 pages
Light-Emitting Diode
No ratings yet
Light-Emitting Diode
13 pages
Debug Database
No ratings yet
Debug Database
4 pages
Univariate and Bivariate Data Analysis + Probability
100% (1)
Univariate and Bivariate Data Analysis + Probability
5 pages
Princeton COS 318: Commented (AAGJ1) : Errata For Part III and IV Is Left
No ratings yet
Princeton COS 318: Commented (AAGJ1) : Errata For Part III and IV Is Left
9 pages
How To Use Google Drive
No ratings yet
How To Use Google Drive
104 pages
NEW AGE - Physics Catalogue 2014 - 2015
No ratings yet
NEW AGE - Physics Catalogue 2014 - 2015
7 pages
Internal Mark Register
No ratings yet
Internal Mark Register
68 pages
Class-12 Aryabhatta Vanni Cs Practical File Lvisn 2024-25
No ratings yet
Class-12 Aryabhatta Vanni Cs Practical File Lvisn 2024-25
51 pages