0% found this document useful (0 votes)
455 views2 pages

Fundamentals of Temperature Measurement

The WL 202 experimental set-up covers a range of temperature measurement methods, including non-electrical methods like liquid-filled and bimetallic thermometers as well as electric methods like thermocouples, resistance temperature detectors, and thermistors. It allows students to learn fundamentals of temperature measurement through hands-on experimentation with different sensor types, heat sources, and calibration equipment. A psychrometer is also included to determine relative air humidity.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
455 views2 pages

Fundamentals of Temperature Measurement

The WL 202 experimental set-up covers a range of temperature measurement methods, including non-electrical methods like liquid-filled and bimetallic thermometers as well as electric methods like thermocouples, resistance temperature detectors, and thermistors. It allows students to learn fundamentals of temperature measurement through hands-on experimentation with different sensor types, heat sources, and calibration equipment. A psychrometer is also included to determine relative air humidity.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Page 1/2

05/2014

WL 202

Fundamentals of Temperature Measurement

* Experimental introduction to temperature


measurement: methods, areas of application,
characteristics1
* Clearly laid out unit primarily for laboratory
experiments, also suitable for demonstration
purposes
Technical Description
Recording temperature is one of the basic tasks in metrology. Electric
temperature sensors are the most widely used in automation applications
but conventional thermometer types are still widely applied in many
areas. The WL 202 experimental set-up covers the full range of
temperature measurement methods. As well as non-electrical measuring
methods, such as gas- and liquid-filled thermometers and bimetallic
thermometers, all typical electric measuring methods are covered in the
experiments. The electrically measured temperatures are displayed
directly on programmable digital displays. A temperature-proportionate
output voltage signal (0...10V) is accessible from lab jacks, enabling
temperature characteristics to be recorded with, for example, a plotter.
For measuring the relative air humidity a psychrometer with two
thermometers is available, one of the thermometers measures the dry
bulb. The wet bulb thermometer is covered in a wet cotton cloth and
measures the evaporative cooling. The temperature difference allows the
relative air humidity to be determined.
A digital multimeter with precision resistors is used to calibrate the
electrical measuring devices. Various heat sources or storage units
(immersion heater, vacuum flask and laboratory heater) permit relevant
temperature ranges to be achieved for the sensors being tested. A tool
box houses the sensors, cables, temperature measuring strips and
immersion heater.

The well-structured instructional material sets out the


fundamentals and provides a step-by-step guide
through the experiments.
Learning Objectives / Experiments
- learning the fundamentals of temperature
measurement by experimentation
- familiarisation with the various methods, their
areas of application and special features
* non-electrical methods: gas- and liquid-filled
thermometers, bimetallic thermometers and
temperature measuring strips
* electric methods: thermocouple,
resistance temperature detector Pt100,
thermistor (NTC)
- determining air humidity with a psychrometer
- calibrating electric temperature sensors

G.U.N.T Gertebau GmbH, Hanskampring 15-17, D-22885 Barsbttel, Phone +49 (40) 67 08 54-0, Fax +49 (40) 67 08 54-42, E-mail [email protected], Web http://www.gunt.de
We reserve the right to modify our products without any notifications.

Page 2/2
05/2014

WL 202

Fundamentals of Temperature Measurement


Specification
[1] experiments in the fundamentals of temperature
measurement with 7 typical measuring devices
[2] various heat sources or storage units: laboratory
heater, immersion heater, vacuum flask
[3] calibration units: precision resistors and digital
multimeter
[4] mercury, bimetallic and gas pressure thermometers
[5] temperature sensors: Pt100, thermocouple type K,
thermistor (NTC)
[6] various temperature measuring strips
[7] psychrometer for humidity measurement
[8] tool box for sensors, cables, measuring strips and
immersion heater

1 power-regulated socket, 2 laboratory heater for water and sand, 3 psychrometer to


determine air humidity, 4 gas pressure thermometer, 5 bimetal thermometer,
6 vacuum flask, 7 mercury thermometer, 8 digital display, thermocouple type K,
9 digital display, thermistor (NTC), 10 digital display, Pt100, 11 multimeter

Technical Data
Immersion heater
- power output: 300W
- adjustment of power feed via power-regulated
socket
Laboratory heater with thermostat
- power output: 450W
- max. temperature: 425C
Vacuum flask: 1L
Measuring ranges
- resistance temperature detector Pt100: 0...100C
- thermocouple type K: 0...1000C
- thermistor (NTC): 20...55C
- mercury thermometer: -10...300C
- bimetallic, gas pressure thermometer: 0...200C
- temperature measuring strips: 29...290C
Precision resistors: 10, 100, 1000
Psychrometer:
- 2x temperature: 0...60C
- rel. humidity: 3...96%

Temperature measurement with a thermocouple type K: A) nickel chrome,


B) nickel; 1 measuring point, 2 tank at constant temperature, 3 reference
point, 4 voltmeter

Dimensions and Weight


LxWxH: 800x450x650mm (experimental unit)
Weight: approx. 45kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery
1 experimental unit
1 tool box
1 set of cables
1 laboratory heater
1 immersion heater
1 vacuum flask
1 digital multimeter
1 set of instructional material

Order Details
Psychrometer: 1 water tank, 2 wet cotton cloth for covering the wet bulb
thermometer, 3 dry bulb thermometer, 4 wet bulb thermometer;
dT temperature difference

060.20200 WL 202 Fundamentals of


Temperature Measurement

G.U.N.T Gertebau GmbH, Hanskampring 15-17, D-22885 Barsbttel, Phone +49 (40) 67 08 54-0, Fax +49 (40) 67 08 54-42, E-mail [email protected], Web http://www.gunt.de
We reserve the right to modify our products without any notifications.

You might also like