Microsoft - Actualtests.70 410.vv2014!10!13.by - kathLEEN

Microsoft.Actualtests.70-410.v2014-10-13.by.KATHLEEN.
188q
Number: 70-410
Passing Score: 800
Time Limit: 120 min
File Version: 12.5
Exam Code: 70-410

Exam Name: Installing and Configuring Windows Server 2012
70-410
QUESTION 1
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role
installed.
An iSCSI SAN is available on the network.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
You create a LUN on the SAN to host the virtual hard drive files for the virtual machines.
You need to create a 3-TB virtual hard disk for VM1 on the LUN. The solution must prevent VM1 from being
paused if the LUN runs out of disk space.
Which type of virtual hard disk should you create on the LUN?
A.
B.
C.
D.
Dynamically expanding VHDX

Fixed-size VHDX
Fixed-size VHD
Dynamically expanding VHD
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 2
Your network contains an Active Directory domain named adatum.com. The domain contains a member server
named Host1.Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VMS and VM6.Both virtual machines connect to a virtual switch
named Virtual1.
On VM5, you install a network monitoring application named Monitor1.
You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the
solution. Choose two.)
A.
B.
C.
D.
E.
F.
Get-VM "VM6" | Set-VMNetworkAdapter-IovWeight 1

Get-VM "VM5" I Set-VMNetworkAdapter -IovWeight 0
Get-VM "VM6" | Set-VMNetworkAdapter -PortMirroring Source
Get-VM "VM6" | Set-VMNetworkAdapter -AllowTeaming On
Get-VM "VM5" | Set-VMNetworkAdapter -PortMirroring Destination
Get-VM "VM5" | Set-VMNetworkAdapter -AllowTeaming On
Correct Answer: CE
Section: (none)
Explanation
The questions states you need to capture all traffic going to and from VM6, using VM5. Get-VM "VM5" | SetVMNetworkAdapter -PortMirroring Destination (<---- Not source as VM5 is the destination for the monitor)
And
Get-VM "VM6" | Set-VMNetworkAdapter -PortMirroring Source (<---- Not destination as we're monitoring VM6
not collecting with it)
QUESTION 3
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 has the virtual switches
listed in the following table.
You create a virtual machine named VM1.VM1 has two network adapters. One network adapter connects to
vSwitch1. The other network adapter connects to vSwitch2.You configure NIC teaming on VM1.
You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network.
What should you do on Server1?
A.
B.
C.
D.
Run the Set-VmNetworkAdaptercmdlet.

Add a new network adapter to VM1.
Create a new virtual switch on Server 1.
Modify the properties of vSwitch1 and vSwitch2.
Correct Answer: A
Section: (none)
Explanation
QUESTION 4
Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V hosts contains
several virtual machines that run Windows Server 2012 R2.
You install the Network Load Balancing feature on the virtual machines.
You need to configure the virtual machines to support Network Load Balancing (NLB).
Which virtual machine settings should you configure?
A.
B.
C.
D.
DHCP guard
Port mirroring
Router guard
MAC address
Correct Answer: D
Section: (none)
Explanation
http://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a0a9d-26a2-49ba-bbbe- 29d11fcbb7ce/
nlb-on-hyperv?forum=winserverhyperv
For NLB to be configured you need to enable MAC address spoofing.
QUESTION 5
installed. Server1 is connected to two Fibre Channel SANs and is configured as shown in the following table.
You have a virtual machine named VM1.

You need to configure VM1 to connect to SAN1.
What should you do first?
A.
B.
C.
D.
Create a Virtual Fibre Channel SAN.

Create a Hyper-V virtual switch.
Add one HBA.
Configure network adapter teaming.
Correct Answer: A
Section: (none)
Explanation
A virtual fibre channel SAN will group physical HBA ports together so that you can add a virtual fibre channel
adapter to a virtual machine that can be connected to a virtual SAN.
References:
http://technet.microsoft.com/en-us/library/hh831413.aspx
QUESTION 6
Your network contains an Active Directory domain named contoso.com. The domain contains a server named
Server1.Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, you create and start a virtual machine named VM1.VM1 is configured as shown in the following
table.
You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1.
What should you do before you create the checkpoint?
A. Run the Resize-VHD cmdlet.
B. Convert Disk1.vhd to a dynamically expanding disk.
C. Shut down VM1.

D. Run the Convert-VHD cmdlet.
Correct Answer: B
Section: (none)
Explanation
QUESTION 7
You have a print server named Server1 that runs Windows Server 2012 R2.
You discover that when there are many pending print jobs, the system drive occasionally runs out of free space.
You add a new hard disk to Server1.You create a new NTFS volume.
You need to prevent the print jobs from consuming disk space on the system volume.
What should you modify?
A.
B.
C.
D.
The properties on the new volume

The properties of the Print Spooler service
The Print Server Properties
The properties of each shared printer
Correct Answer: C
Section: (none)
Explanation
QUESTION 8
Your network contains an Active Directory domain named adatum.com. The domain contains a server named
Server1 that runs Windows Server 2012 R2.
On a server named Corel, you perform a Server Core Installation of Windows Server 2012 R2.You join Corel to
the adatum.com domain.
You need to ensure that you can use Event Viewer on Server1 to view the event logs on Corel.
What should you do on Corel?
A.
B.
C.
D.
Run the Enable-NetFirewallRulecmdlet.

Run the Disable-NetFirewallRulecmdlet.
Install Windows Management Framework.
Install Remote Server Administration Tools (RSAT).
Correct Answer: A
Section: (none)
Explanation
Information regarding IPsec policy changes, etc. can be found in the Event Viewer. Thus you need to enable
the NetFirewallRule command. This will allow you to view the event logs.
QUESTION 9
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2.Server1 and
Server2 are part of a workgroup.
On Server1 and Server2, you create a local user account named Admin1.You add the account to the local
Administrators group. On both servers, Admin1 has the same password.
You log on to Server1 as Admin1.You open Computer Management and vol.connect to Server2. When you
attempt to create a scheduled task, view the event logs, and manage the shared folders, you receive Access
Denied messages.
You need to ensure that you can administer Server2 remotely from Server1 by using Computer Management.
What should you configure on Server2?
A.
B.
C.
D.
From
From
From
From
Server Manager, modify the Remote Management setting.

Local Users and Groups, modify the membership of the Remote Management Users group.
Windows Firewall, modify the Windows Management Instrumentation (WMI) firewall rule.
Registry Editor, configure the LocalAccountTokenFilterPolicy registry value.
Correct Answer: D
Section: (none)
Explanation
QUESTION 10
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V
server role installed.
Server1 is configured as shown in the following table.
You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services (WDS).
You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE.
Which virtual machine setting should you configure for VM2?
A. NUMA topology
B. Resource control
C.
D.
E.
F.
G.
H.
I.
J.
K.
resource metering
virtual Machine Chimney
The VLAN ID
Processor Compatibility
The startup order
Automatic Start Action
Integration Services
Port mirroring
Single-root I/O virtualization
Correct Answer: G
Section: (none)
Explanation
Explanation:
Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it is booting from the
network is first.
References:
http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx Exam Ref 70-410, Installing and
Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure
virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7:
Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION 11
You plan to schedule a complete backup of Server1 by using Windows Server Backup.
You need to ensure that the state of VM1 is saved before the backup starts.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D.
E.
F.
G.
H.
I.
J.
K.

The VLAN ID
The startup order
Port mirroring
Correct Answer: I
Section: (none)
Explanation
Explanation:
The Integration Services settings on virtual machines include services such as operating system shutdown,
time synchronization, data exchange, Heartbeat, and Backup (volume snapshot services). This snapshot will
ensure that the state of VM1 is saved prior to backup.
References:
http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx Exam Ref 70-410, Installing and Configuring
Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine
settings, p.144
QUESTION 12
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
A.
B.
C.
D.
NUMA topology
Resource control
resource metering
E.
F.
G.
H.
I.
J.
K.
The VLAN ID
The startup order
Port mirroring
Correct Answer: K
Section: (none)
Explanation
Explanation:
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to
maximize network throughput while minimizing network latency and the CPU overhead required for processing
network traffic.
References:
http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/
hh831410.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure
Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring
virtual machines, p.335
QUESTION 13
You need to ensure that VM1 can use more CPU time than the other virtual machines when the CPUs on
Server1 are under a heavy load.
A.
B.
C.
D.
NUMA topology
Resource control
resource metering
E.
F.
G.
H.
I.
J.
K.
The VLAN ID
The startup order
Port mirroring
Correct Answer: B
Section: (none)
Explanation
Explanation:
B. Resource controls provide you with several ways to control the way that Hyper-V allocates resources to
virtual machine. Resource control in used in the event where you need to adjust the computing resources of a
virtual machine, you can reconfigure the resources to meet the changing needs. You can also specify resource
controls to automate how resources are allocated to virtual machines.
References:
hh831410.aspx http://technet.microsoft.com/en-us/library/cc742470.aspx Exam Ref 70-410, Installing and
Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure
virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7:
Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION 14
Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO)
named GP1 that is linked to the domain.GP1 contains a software restriction policy that blocks an application
named App1.
You have a workgroup computer named Computer1 that runs Windows 8.A local Group Policy on Computer1
contains an application control policy that allows App1.
You join Computer1 to the domain.
You need to prevent App1 from running on Computer1.
What should you do?
A.
B.
C.
D.
FromComputer1, run gpupdate /force.

From Group Policy Management, add an application control policy to GP1.
From Group Policy Management, enable the Enforced option on GP1.
In the local Group Policy of Computer1, configure a software restriction policy.
Correct Answer: B
Section: (none)
Explanation
QUESTION 15
Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an
organizational unit (OU) named AllComputers. Client computers run either windows 7 or Windows 8.
You create a Group Policy object (GPO) named GP1.
You link GP1 to the AllComputers OU.

You need to ensure that GP1 applies only to computers that have more than 8 GB of memory.
A.
B.
C.
D.
The Security settings of GP1

The Block Inheritance option for AllComputers
The Security settings of AllComputers
The WMI filter for GP1
Correct Answer: D
Section: (none)
Explanation
Explanation:
Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group
Policy objects (GPOs) based on attributes of the target computer. When a GPO that is linked to a WMI filter is
applied on the target computer, the filter is evaluated on the target computer. If the WMI filter evaluates to false,
the GPO is not applied (except if the client computer is running Windows Server, in which case the filter is
ignored and the GPO is always applied).If the WMI filter evaluates to true, the GPO is applied.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10: Implementing Group Policy,
p.470, 482
http://technet.microsoft.com/en-us/library/jj134176
WMI filtering using GPMC
QUESTION 16
Your network contains an Active Directory domain named contoso.com. The domain contains an application
server named Server1.Server1 runs Windows Server 2012 R2.
Server1 is configured as an FTP server.
Client computers use an FTP application named App1.exE. App1.exe uses TCP port 21 as the control port and
dynamically requests a data port.
On Server1, you create a firewall rule to allow connections on TCP port 21.
You need to configure Server1 to support the client connections from App1.exE.
What should you do?
A.
B.
C.
D.
Run netshadvfirewall set global statefulftp enable.

Run netsh firewall addportopening TCP 21 dynamicftp.
Create an inbound firewall rule to allow App1.exE.
Create an isolation connection security rule.
Correct Answer: A
Section: (none)
Explanation
The Netshadvfirewall set global statefulftp command will configure how Windows Firewall with Advanced
Security handles FTP traffic that uses an initial connection on one port to request a data connection on a
different port.
When statefulftp is enabled (Disabled being the default setting) the firewall tracks the port numbers specified in
PORT command requests and in the responses to PASV requests, and then allows the incoming FTP data
traffic entering on the requested port number.
QUESTION 17
Your network contains an Active Directory domain named contoso.com.
All client computers run Windows 8.
You deploy a server named Server1 that runs Windows Server 2012 R2.
You install a new client-server application named App1 on Server1 and on the client computers. The client
computers must use TCP port 6444 to connect to App1 on Server1.Server1 publishes the information of App1
to an intranet server named Server2 by using TCP port 3080.
You need to ensure that all of the client computers can connect to App1. The solution must ensure that the
application can connect to Server2.
Which Windows Firewall rule should you create on Server1?
A.
B.
C.
D.
An outbound rule to allow a connection to TCP port 3080

An inbound rule to allow a connection to TCP port 3080
An outbound rule to allow a connection to TCP port 6444
An inbound rule to allow a connection to TCP port 6444
Correct Answer: D
Section: (none)
Explanation
A. Server2 needs inbound on 3080
References:
http://social.technet.microsoft.com/wiki/contents/articles/13894.troubleshooting-windows- firewallwithadvanced-security-in-windows-server-2012.aspx
QUESTION 18
Your network contains an Active Directory domain named contoso.com. The domain contains two servers
named Server1 and Server2 that run Windows Server 2012 R2.
You create a security template named Template1 by using the Security Templates snap-in.
You need to apply Template1 to Server2.
Which tool should you use?
A.
B.
C.
D.
Authorization Manager
Local Security Policy
Certificate Templates
System Configuration
Correct Answer: B
Section: (none)
Explanation
A security policy is a combination of security settings that affect the security on a computer. You can use your
local security policy to edit account policies and local policies on your local computer.
QUESTION 19
Your network contains multiple subnets.
On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2. You install the
DNS Server server role on Server1, and then you create a standard primary zone named contoso.com.
You need to ensure that client computers can resolve single-label names to IP addresses.
A.
B.
C.
D.
Create a reverse lookup zone.

Convert the contoso.com zone to an Active Directory-integrated zone.
Create a GlobalNames zone.
Configure dynamic updates for contoso.com.
Correct Answer: C
Section: (none)
Explanation
Explanation:
You should use GlobalNames zone to take advantage of single-label names. This will also ensure that the zone
remains valid.
References:
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4: Deploying and configuring
core network services, Objective 4.3: Deploy and Configure the DNS service, p.233
http://technet.microsoft.com/en-us/library/cc731744.aspx
QUESTION 20
Your network contains an Active Directory domain named contoso.com. The DNS zone for contoso.com is
Active-Directory integrated.
The domain contains 500 client computers. There are an additional 20 computers in a workgroup.
You discover that every client computer on the network can add its record to the contoso.com zone.
You need to ensure that only the client computers in the Active Directory domain can register records in the
contoso.com zone.
What should you do?
A.
B.
C.
D.
Sign the contoso.com zone by using DNSSEC.

Configure the Dynamic updates settings of the contoso.com zone.
Configure the Security settings of the contoso.com zone.
Move the contoso.com zone to a domain controller that is configured as a DNS server.
Correct Answer: B
Section: (none)
Explanation
QUESTION 21
Your network contains an Active Directory domain named contoso.com. The domain contains a domain
controller named Server1 that has the DNS Server server role installed. Server1 hosts a primary zone for
contoso.com.
The domain contains a member server named Server2 that is configured to use Server1 as its primary DNS
server.
From Server2, you run nslookup.exe as shown in the exhibit.(Click the Exhibit button.)
You need to ensure that when you run Nslookup, the correct name of the default server is displayed.
What should you do?
A.
B.
C.
D.
On Server1, create a reverse lookup zone.

On Server1, modify the Security settings of the contoso.com zone.
From Advanced TCP/IP Settings on Server1, add contoso.com to the DNS suffix list.
From Advanced TCP/IP Settings on Server2, add contoso.com to the DNS suffix list.
Correct Answer: A
Section: (none)
Explanation
Explanation:
Make sure that a reverse lookup zone that is authoritative for the PTR resource record exists. PTR records
contain the information that is required for the server to perform reverse name lookups.
References:
http://technet.microsoft.com/en-us/library/cc961417.aspx Exam Ref: 70-410: Installing and Configuring
Windows Server 2012 R2, Chapter4: Deploying and configuring core network services, Objective 4.1: Configure
IPv4 and IPv6 addressing, p.246
QUESTION 22
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server
named Server1 that runs Windows Server 2012 R2.
You create a DHCP scope named Scope1. The scope has a start address of 192.168.1.10, an end address of
192.168.1.50, and a subnet mask of 255.255.255.192.
You need to ensure that Scope1 has a subnet mask of 255.255.255.0.
A.
B.
C.
D.
From
From
From
From
the DHCP console, reconcile Scope1.

the DHCP console, delete Scope1.
the DHCP console, modify the Scope Options of Scope1.
Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.
Correct Answer: B
Section: (none)
Explanation
Set-DhcpServerv4Scope
Sets the properties of an existing IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server
service.
QUESTION 23
Your company has a main office and two branch offices. The offices connect to each other by using a WAN
link.
In the main office, you have a server named Server1 that runs Windows Server 2012 R2.
Server1 is configured to use an IPv4 address only.
You need to assign an IPv6 address to Server1. The IP address must be private and routable.
Which IPv6 address should you assign to Server1?
A.
B.
C.
D.
2001:ab32:145c::32cc:401b
ff00:3rff:65df:145c:dca8::82a4
fd00:ab32:14:ad88:ac:58:abc2:4
fe80:ab32:145c::32cc:401b
Correct Answer: C
Section: (none)
Explanation
Explanation:
Unique local addresses
Unique local addresses are IPv6 addresses that are private to an organization in the same way that private
addresses--such as 10.x.x.x, 192.168.x.x, or 172.16.0.0 - 172.31.255.255--can be used on an IPv4 network.
Unique local addresses, therefore, are not routable on the IPv6 Internet in the same way that an address like
10.20.100.55 is not routable on the IPv4 Internet.
A unique local address is always structured as follows:
The first 8 bits are always 11111101 in binary format. This means that a unique local address always begins
with FD and has a prefix identifier of FD00::/8.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 6: p.266
QUESTION 24
In an isolated test environment, you deploy a server named Server1 that runs a Server Core Installation of
Windows Server 2012 R2. The test environment does not have Active Directory Domain Services (AD DS)
installed.
You install the Active Directory Domain Services server role on Server1.
You need to configure Server1 as a domain controller.
Which cmdlet should you run?
A. Install-ADDSDomain
B. Install-ADDSDomainController
C. Install-WindowsFeature
D. Install-ADDSForest
Correct Answer: D
Section: (none)
Explanation
QUESTION 25
You have a server named Server1 that runs Windows Server 2012 R2.
You promote Server1 to a domain controller.
You need to view the service location (SRV) records that Server1 registers in DNS.
A.
B.
C.
D.
Open the Srv.sys file.

Open the Netlogon.dns file.
Run ipconfig /displaydns,
Run Get-DnsServerDiagnostics.
Correct Answer: B
Section: (none)
Explanation
QUESTION 26
Your network contains an Active Directory domain named adatum.com. The domain contains several thousand
member servers that run Windows Server 2012 R2.All of the computer accounts for the member servers are in
an organizational unit (OU) named ServersAccounts.
Servers are restarted only occasionally.
You need to identify which servers were restarted during the last two days.
What should you do?
A.
B.
C.
D.
Run Get-ADComputer and specify the SearchScope parameter.

Run dsquery computer and specify the -stalepwd parameter.
Run dsquery server and specify the -o parameter.
Run Get-ADComputer and specify the lastLogon property.
Correct Answer: D
Section: (none)
Explanation
QUESTION 27
Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. The
domain contains four domain controllers. The domain controllers are configured as shown in the following table.
All domain controllers are DNS servers.

You plan to deploy a new domain controller named DC5 in the contoso.com domain.
You need to identify which domain controller must be online to ensure that DC5 can be promoted successfully
to a domain controller.
Which domain controller should you identify?
A.
B.
C.
D.
DC1
DC2
DC3
DC4
Correct Answer: D
Section: (none)
Explanation
QUESTION 28
Your network contains an Active Directory forest that contains three domains.
A group named Group1 is configured as a domain local distribution group in the forest root domain.
You plan to grant Group1 read-only access to a shared folder named Share1.Share1 is located in a child
domain.
You need to ensure that the members of Group1 can access Share1.
A.
B.
C.
D.
Convert Group1 to a universal security group.

Convert Group1 to a global distribution group.
Convert Group1 to a universal distribution group.
Convert Group1 to a domain local security group.
Correct Answer: A
Section: (none)
Explanation
Explanation:
Universal can be used for any domain or forest. Furthermore a Universal group can span multiple domains,
even the entire forest.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 5: Install and Administer Active
Directory, Objective 5.3 Create and manage Active Directory groups and Organization units, p. 289-291, 293
cc755692(v=ws.10).aspx
QUESTION 29
Your network contains an Active Directory domain named contoso.com. The domain contains 100 servers. The
servers are contained in an organizational unit (OU) named ServersOU.
You need to create a group named Group1 on all of the servers in the domain.You must ensure that Group1 is
added only to the servers.
A.
B.
C.
D.
A Restricted Groups setting in a Group Policy linked to ServersOU

A Local Users and Groups preferences setting in a Group Policy linked to the Domain Controllers OU
A Local Users and Groups preferences setting in a Group Policy linked to ServersOU
A Restricted Groups setting in a Group Policy linked to the domain
Correct Answer: C
Section: (none)
Explanation
Explanation:
C. allows you to centrally manage local users and groups on domain member computers and is this is the
correct OU for the GPO change
References:
http://technet.microsoft.com/en-us/library/cc957640.aspx http://technet.microsoft.com/en-us/library/
cc731972.aspx Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 5.3 Create
and manage Active Directory groups and Organization units, Chapter 5: Install and Administer Active Directory,
p. 289-291, 293, 328
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10: Implement Group Policy, p.
507
QUESTION 30
Your network contains an Active Directory forest named contoso.com. All domain controllers currently run
Windows Server 2008 R2.
You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2.
The new domain controller will have the following configurations:
Schema master
Global catalog server
Active Directory Federation Services server role
Active Directory Certificate Services server role
You need to identify which configuration can be fulfilled by using the Active Directory Domain Services
Configuration Wizard.
Which configuration should you identify?
A.
B.
C.
D.
Enable the global catalog server.

Install the DNS Server role.
Install the Active Directory Certificate Services role.
Transfer the schema master.
Correct Answer: A
Section: (none)
Explanation
QUESTION 31
Your network contains an Active Directory forest named contoso.com.
The forest contains two domains named contoso.com and child.contoso.com and two sites named Site1 and
Site2. The domains and the sites are configured as shown in following table.
When the link between Site1 and Site2 fails, users fail to log on to Site2.
You need to identify what prevents the users in Site2 from logging on to the child.contoso.com domain.
What should you identify?
A.
B.
C.
D.
The placement of the global catalog server

The placement of the infrastructure master
The placement of the domain naming master
The placement of the PDC emulator
Correct Answer: D
Section: (none)
Explanation
The exhibit shows that Site2 does not have a PDC emulator. This is important because of the close interaction
between the RID operations master role and the PDC emulator role
The PDC emulator processes password changes from earlier-version clients and other domain controllers on a
best-effort basis; handles password authentication requests involving passwords that have recently changed
and not yet been replicated throughout the domain; and, by default, synchronizes time. If this domain controller
cannot connect to the PDC emulator, this domain controller cannot process authentication requests, it may not
be able to synchronize time, and password updates cannot be replicated to it.
QUESTION 32
You plan to create a storage pool that will contain a new volume.
You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity
layout.
What is the minimum number of 256-GB disks required for the storage pool?
A.
B.
C.
D.
2
3
4
5
Correct Answer: C
Section: (none)
Explanation
QUESTION 33
You plan to use Windows PowerShell Desired State Configuration (DSC) to confirm that the Application Identity
service is running on all file servers.
You define the following configuration in the Windows PowerShell Integrated Scripting Environment (ISE):
You need to use DSC to configure Server1 as defined in the configuration.

What should you run first?
A.
B.
C.
D.
Service1
Configuration1
Start DscConfiguration
Test-DscConfigu ration
Correct Answer: B
Section: (none)
Explanation
QUESTION 34
Server1.Server1 runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A.
B.
C.
D.
From
From
From
From
the Services console, configure the General settings.

Windows PowerShell, run Set-Service and specify the -StartupType parameter.
a command prompt, run sc.exe and specify the config parameter.
a command prompt, run sc.exe and specify the privs parameter.
Correct Answer: C
Section: (none)
Explanation
Explanation:
Executing the ss.exe command with the config parameter will modify service configuration.
QUESTION 35
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The
domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
You need to modify the SAM account name of Group1.
A.
B.
C.
D.
E.
F.
G.
H.
Add-AdPrincipalGroupMembership
Install-AddsDomainController
Install-WindowsFeature
Install-AddsDomain
Rename AdObject
Set AdAccountControl
Set-AdGroup
Set-User
Correct Answer: E
Section: (none)
Explanation
QUESTION 36
You need to add a new domain controller to the domain.
You install Windows Server 2012 R2 on a new server named DC3.

Which cmdlet should you run next?
A.
B.
C.
D.
E.
F.
G.
H.
Install-AddsDomain
Rename AdObject
Set-AdGroup
Set-User
Correct Answer: C
Section: (none)
Explanation
The Install-ADDSDomainController cmdlet installs a domain controller in Active Directory.
Example: C:\PS>Install-ADDSDomainController -InstallDns -Credential (Get-Credential CORP\Administrator) DomainName "corp.contoso.com"
QUESTION 37
You need to prevent User1 from changing his password. The solution must minimize administrative effort.
A.
B.
C.
D.
E.
F.
G.
H.
Install-AddsDomain
Rename AdObject
Set-AdGroup
Set-User
Correct Answer: F
Section: (none)
Explanation
Explanation:
The Set-ADAccountControl cmdlet modifies the user account control (UAC) values for an Active Directory user
or computer account. UAC values are represented by cmdlet parameters. CannotChangePassword Modifies
the ability of an account to change its password. To disallow password change by the account set this to $true..
This parameter changes the Boolean value of the CannotChangePassword property of an account.
The following example shows how to specify the PasswordCannotChange parameter.
-CannotChangePassword $false
References:
http://technet.microsoft.com/en-us/library/ee617249.aspx http://technet.microsoft.com/en-us/library/
hh974723.aspx http://technet.microsoft.com/en-us/library/hh974722.aspx
QUESTION 38
You reconfigure DC2 as a member server in the domain.
You need to add DC2 as the first domain controller in a new domain in the forest.
A.
B.
C.
D.
E.
F.
G.
H.
Install-AddsDomain
Rename AdObject
Set-AdGroup
Set-User
Correct Answer: D
Section: (none)
Explanation
Explanation:
Installs a new Active Directory domain configuration
C:\PS>Install-ADDSDomain -Credential (Get-Credential CORP\EnterpriseAdmin1) -NewDomainName child ParentDomainName corp.contoso.com -InstallDNS -CreateDNSDelegation -DomainMode Win2003 ReplicationSourceDC DC1.corp.contoso.com -SiteName Houston -DatabasePath "D:\NTDS" SYSVOLPath "D:
\SYSVOL" -LogPath
"E:\Logs" NoRebootOnCompletion
References:
QUESTION 39
You install a network monitoring application on VM2.

You need to ensure that all of the traffic sent to VM3 can be captured on VM2.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
NUMA topology
Resource control
Resource metering
Virtual Machine Chimney
The VLAN ID
The startup order
Port mirroring
Correct Answer: J
Section: (none)
Explanation
Explanation:
With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as the
switch port that receives copies of all the traffic. And since Port mirroring allows the network traffic of a virtual
machine to be monitored by copying the traffic and forwarding it to another virtual machine that is configured for
monitoring, you should configure port mirroring on VM2.
References:
http://technet.microsoft.com/en-us/library/jj679878.aspx#bkmk_portmirror
QUESTION 40
You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter.
Host1 contains two virtual machines named VM1 and VM2.
You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN.
Which two configurations should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On VM1, configure a Fibre Channel adapter.
B.
C.
D.
E.
On Host1, configure a new virtual switch.

On VM1, add a network adapter.
On Host1, configure a new Virtual Fibre Channel SAN.
On Host1, modify the Hyper-V settings.
Correct Answer: AD
Section: (none)
Explanation
Explanation:
The process of setting up virtual Fibre Channel starts with building a virtual SAN. DOthis by opening the HyperV Manager, right click on the listing for your Hyper-V server in the console tree, and then choose the Virtual
SAN Manager command from the shortcut menu. Then (A) Once you have created a virtual SAN, the next step
in the process is to link a virtual machine to the virtual SAN.To do so, right click on the virtual machine for which
you want to provide Fibre Channel connectivity and select the Settings command from the resulting shortcut
menu. Next, select the Add Hardware container, as shown in the figure above, and then select the Fibre
Channel Adapter option from the list of available hardware. Etc.
* Virtual Fibre Channel for Hyper-V (also referred to as Synthetic Fibre Channel) provides VM guest operating
systemswith direct access to a Fibre Channel SAN by using a standard World Wide Name (WWN) associated
with a virtual machine
QUESTION 41
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
VM1 has several snapshots.
You need to modify the snapshot file location of VM1.
What should you do?
A.
B.
C.
D.
Right-click VM1, and then click Export...

Shut down VM1, and then modify the settings of VM1.
Delete the existing snapshots, and then modify the settings of VM1.
Pause VM1, and then modify the settings of VM1.
Correct Answer: C
Section: (none)
Explanation
Explanation: you will need to navigate to the Hyper-V Management snap-in
(C:\ProgramData\Microsoft\Windows\Hyper-V) and from there access the Snapshot file Location tab where you
can change the settings for the VM1 snapshot file location. However, since there are already several snapshots
in existence, you will need to delete them first because you will not be able to change the location of the
snapshot file while there is an existing snapshot and you need to modify the snapshot file location of VM1.
QUESTION 42
You have virtual machine named VM1.
VM1 uses a fixed size virtual hard disk (VHD) named Disk1.vhD. Disk1.vhd is 200 GB.
You shut down VM1.
You need to reduce the size of Disk1.vhD.
Which action should you select from the Edit Virtual Hard Disk Wizard?
A.
B.
C.
D.
Shrink
compact
Merge
Convert
Correct Answer: D
Section: (none)
Explanation
QUESTION 43
You need to create a 3-TB virtual hard disk (VHD) on Server1.
A.
B.
C.
D.
New-StoragePool
Diskpart
File Server Resource Manager (FSRM)
New-StorageSubsytemVirtualDisk
Correct Answer: B
Section: (none)
Explanation
You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the
DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the
file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code
demonstrates how to create a VHD file at
C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB).
DiskPart
Microsoft DiskPart version 6.1.7100
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: WIN7
DISKPART> create vdisk file="C:\vdisks\disk1.vhd" maximum=16000
QUESTION 44
installed. On Server1, you create a virtual machine named VM1.VM1 has a legacy network adapter.
You need to assign a specific amount of available network bandwidth to VM1.
A.
B.
C.
D.
Add a second legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
Add a second legacy network adapter, and then configure network adapter teaming.
Remove the legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
Remove the legacy network adapter, and then add a network adapter.
Correct Answer: D
Section: (none)
Explanation
Explanation:
Add a New network adapter because the legacy network adapter doesn't support bandwidth management.
References:
http://technet.microsoft.com/en-us/library/hh848457(v=wps.620).aspx Exam Ref 70-410: Installing and
Configuring Windows Server 2012 R2: Objective 3.3: Create and Configure virtual networks, Chapter 3: p. 177,
181
QUESTION 45
You create a new inbound rule by using Windows Firewall with Advanced Security.
You need to configure the rule to allow Server1 to accept unsolicited inbound packets that are received through
a network address translation (NAT) device on the network.
Which setting in the rule should you configure?
A.
B.
C.
D.
Interface types
Authorized computers
Remote IP address
Edge traversal
Correct Answer: D
Section: (none)
Explanation
Explanation:
Edge traversal allows the computer to accept unsolicited inbound packets that have passed through an edge
device, such as a network address translation (NAT) router or firewall.
References:
QUESTION 46
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012
R2.A server named Server1 is configured to encrypt all traffic by using IPSec.
You need to ensure that Server1 can respond to ping requests from computers that do not support IPSec.
What should you do?
A.
B.
C.
D.
From
From
From
From
a command prompt, run netsh set global autotuninglevel = highlyrestrictedcongestionprovider=none.

a command prompt, run netsh set global autotuninglevel-restricted congestionprovider=ctcp.
Windows Firewall with Advanced Security, allow unicast responses for the Domain Profile.
Windows Firewall with Advanced Security, exempt ICMP from IPSec.
Correct Answer: D
Section: (none)
Explanation
QUESTION 47
You have a server named Server1 that runs Windows Server 2012 R2.You need to create a script that will
create and mount a virtual hard disk.
A.
B.
C.
D.
diskpart.exe
vdsldr.exe
fsutil.exe
vds.exe
Correct Answer: A
Section: (none)
Explanation
QUESTION 48
Server1 has three physical network adapters named NIC1, NIC2, and NIC3.
On Server1, you create a NIC team named Team1 by using NIC1 and NIC2.You configure Team1 to accept
network traffic on VLAN 10.
You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must
ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?
A.
B.
C.
D.
From Server Manager, change the load balancing mode of Team1.

Run the New-NetLbfoTeamcmdlet.
From Server Manager, add an interface to Team1.
Run the Add-NetLbfoTeamMembercmdlet.
Correct Answer: C
Section: (none)
Explanation
QUESTION 49
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has six network adapters. Two
of the network adapters are connected to a network named LAN1, two of the network adapters are connected
to a network named LAN2, and two of the network adapters are connected to a network named LAN3.
You create a network adapter team named Team1 from the two adapters connected to LANI. You create a
network adapter team named Team2 from the two adapters connected to LAN2.
A company policy states that all server IP addresses must be assigned by using a reServer1 address in DHCP.
You need to identify how many DHCP reservations you must create for Server1.
How many reservations should you identify?
A.
B.
C.
D.
3
4
6
8
Correct Answer: B
Section: (none)
Explanation
QUESTION 50
On Server1, you open Computer Management as shown in the exhibit.(Click the Exhibit button.)
You need to ensure that you can create a 3-TB volume on Disk 1.
A.
B.
C.
D.
Create a storage pool.

Convert the disk to a GPT disk.
Convert the disk to a dynamic disk.
Create a VHD, and then attach the VHD.
Correct Answer: B
Section: (none)
Explanation
QUESTION 51
You have a server named Server1.Server1 runs Windows Server 2012 R2.
Server1 has a thin provisioned disk named Disk1.
You need to expand Disk1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A.
B.
C.
D.
E.
From
From
From
From
From
File and Storage Services, extend Disk1.

File and Storage Services, add a physical disk to the storage pool.
Disk Management, extend the volume.
Disk Management, delete the volume, create a new volume, and then format the volume.
File and Storage Services, detach Disk1.
Correct Answer: AB
Section: (none)
Explanation
Step 1 (B): if required add physical disk capacity.
Step 2 (A): Dynamically extend the virtual disk (not volume). The File and Storage Services role and the
Storage Services role service are installed by default, but without any additional role services. This basic
functionality enables you to use Server Manager or Windows PowerShell to manage the storage functionality of
your servers.
QUESTION 52
You have a DHCP server named Server1 that runs Windows Server 2008.
You install Windows Server 2012 R2 on a server named Server2.You install the DHCP Server server role on
Server2.
You need to migrate the DHCP services from Server1 to Server2. The solution must meet the following
requirements:
Ensure that existing leases are migrated.
Prevent lease conflicts.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A.
B.
C.
D.
E.
F.
On Server1, run the Export-DhcpServercmdlet.

On Server1, run the Stop-Service cmdlet.
On Server2, run the Receive-SmigServerDatacmdlet.
On Server2, run the Stop-Service cmdlet.
On Server2, run the Import-DhcpServercmdlet.
On Server1, run the Send-SmigServerDatacmdlet.
Correct Answer: ABE

Section: (none)
Explanation
QUESTION 53
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and
Document Services server role installed.
You connect a new print device to the network. The marketing department and the sales department will use
the print device.
You need to provide users from both departments with the ability to print to the network print device. The
solution must ensure that if there are multiple documents queued to print, the documents from the sales users
print before the documents from the marketing users.
A.
B.
C.
D.
Add two printers and configure printer pooling.

Add one printer. Modify the printer priority and the security settings.
Add two printers. Modify the priorities of each printer and the security settings of each printer.
Add one printer and configure printer pooling.
Correct Answer: C
Section: (none)
Explanation
Explanation:
To set different print priority to different groups you need to navigate to the Advanced tab of the Printers and
Faxes properties to set priorities to ensure that the Sales department print jobs take priority.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 2.3 Configure print and
document services, Chapter 2: Configure Server roles and Features, p. 93, 97, 104
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 9: Print and Document Services,
p. 444
http://technet.microsoft.com/en-us/library/cc738090(v=ws.10).aspx
QUESTION 54
Your network contains an Active Directory domain named contoso.com. The domain contains two member
servers named Server1 and Server2 that run Windows Server 2012 R2.
You log on to Server1.
You need to retrieve a list of the active TCP connections on Server2.
Which command should you run from Server1?
A.
B.
C.
D.
winrm get server2

netstat> server2
dsquery * -scope base -attrip,server2
winrs -r:server2netstat
Correct Answer: D
Section: (none)
Explanation
QUESTION 55
Your network contains an Active Directory domain named contoso.com. The network contains a server named
Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2
Service Pack 1 (SP1).Server1 and Server2 are member servers.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A.
B.
C.
D.
E.
Install Remote Server Administration Tools on Server1.

Install Windows Management Framework 3.0 on Server2.
Install the Windows PowerShell 2.0 engine on Server1.
Install Microsoft .NET Framework 4 on Server2.
Install Remote Server Administration Tools on Server2.
Correct Answer: BD
Section: (none)
Explanation
Explanation:
To be able to fully manage remote servers that run Windows Server 2008 or the R2 Service Pack 1 operating
system, you should install the .NET Framework 4 on Server2 first followed by the Windows Management
Framework 3.0.
QUESTION 56
named Server1 and Server2.Server1 runs Windows Server 2012 R2.Server2 runs Windows Server 2008 R2
Service Pack 1 (SP1) and has the DHCP Server server role installed.
You need to manage DHCP on Server2 by using the DHCP console on Server1.
A.
B.
C.
D.
From
From
From
From
the Microsoft Management Console on Server1, add a snap-in.

Windows PowerShell on Server1, run Install-WindowsFeature.
Windows Firewall with Advanced Security on Server2, create an inbound rule.
Internet Explorer on Server2, download and install Windows Management Framework 3.0.
Correct Answer: B
Section: (none)
Explanation
Explanation:
The DHCP snap-in isn't available unless the DHCP feature is installed. Server 1 is stated to not have DHCP
installed, so the snap-in therefore cannot be added. We must add the DHCP server role.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6 Network Administration, p.228
QUESTION 57
named Server1 and Server2 that run Windows Server 2012 R2.Server1 has the Group Policy Management
feature installed. Server2 has the Print and Document Services server role installed.
On Server2, you open Print Management and you deploy a printer named Printer1 by using a Group Policy
object (GPO) named GPO1.When you open GPO1 on Server1, you discover that the Deployed Printers node
does not appear.
You need to view the Deployed Printers node in GPO1.
What should you do?
A.
B.
C.
D.
On Server1, modify the Group Policy filtering options of GPO1.

On a domain controller, create a Group Policy central store.
On Server2, install the Group Policy Management feature.
On Server1, configure the security filtering of GPO1.
Correct Answer: C
Section: (none)
Explanation
Explanation:
To use Group Policy for printer deployment you will need to have a Windows Active Directory domain, and this
article assumes that your Domain Controller is a Windows 2008 R2 Server. You will also need the Print
Services role installed on a server (can be on your DC), and you will be using the Print Management and Group
Policy Management consoles to configure the various settings. It is assumed that you have already followed
Part One and have one or more printers shared on your server with the necessary drivers, ready to deploy to
your client computers. The question does not mention if GPMC is installed on server 2, so I assume that it does
not deploy the GPO because it had no GPMC on server 2.
GPMC is not installed by default.
QUESTION 58
Your network contains an Active Directory domain named contoso.com. The domain contains a member server
named Server 1.Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.
The DHCP clients in Subnet_Tor can connect to the client computers in Subnet_Mtl by using an IP address or a
FQDN. You discover that the DHCP clients in Subnet_Mtl can connect to client computers in Subnet_Tor by
using an IP address only.
You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a
FQDN.
What should you add?
A.
B.
C.
D.
The 006 DNS Servers option to Subnet_Mtl

The 006 DNS Servers option to Subnet_Tor
The 015 DNS Domain Name option to Subnet_Mtl
The 015 DNS Domain Name option to Subnet_Tor
Correct Answer: A
Section: (none)
Explanation
QUESTION 59
Your network contains an Active Directory forest named contoso.com. The forest contains two domains named
contoso.com and child.contoso.com. The forest contains two domain controllers. The domain controllers are
configured as shown in the following table.
You need to ensure that DC2 can provide authoritative responses for queries to the contoso.com namespace.
What should you do?
A.
B.
C.
D.
On DC2, create a forwarder.

On DC1, create a delegation.
On DC1, change the replication scope of the contoso.com zone.
On DC2, modify the Zone Transfers settings.
Correct Answer: B
Section: (none)
Explanation
Authoritative Response means, the server needs to respond with a record, which means the server doesnt
forward the query. So in this case, I assume DC1 is configured to replicate with DC2 for the zone(not delegation
of the child domain zone to DC2). Replication setting needs to be configured on DC1 to Forest wide from
default domain wide.
What is authoritative response:
http://www.inetdaemon.com/tutorials/internet/dns/servers/authoritative.shtml
QUESTION 60
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2.
Server1 is configured to obtain an IPv4 address by using DHCP.
You need to configure the IPv4 settings of the network connection on Server1 as follows:
IP address: 10.1.1.1
Subnet mask: 255.255.240.0
Default gateway: 10.1.1.254
What should you run?
A.
B.
C.
D.
netsh.exe
netcfg.exe
msconfig.exe
ipconfig.exe
Correct Answer: A
Section: (none)
Explanation
Explanation:
In order to configure TCP/IP settings such as the IP address, Subnet Mask, Default Gateway, DNS and WINS
addresses and many other options you can use Netsh.exE.
QUESTION 61
controller named DC1 that hosts the primary DNS zone for contoso.com.
All client computers are configured to use DC1 as the primary DNS server.
You need to configure DC1 to resolve any DNS requests that are not for the contoso.com zone by querying the
DNS server of your Internet Service Provider (ISP).
A.
B.
C.
D.
Naming Authority Pointer (NAPTR) DNS resource records (RR)

Name server (NS) records
Forwarders
Conditional forwarders
Correct Answer: C
Section: (none)
Explanation
Explanation:
On a network with several servers and/or client computers a server that is configured as a forwarder will
manage the Domain Name System (DNS) traffic between your network and the Internet.
QUESTION 62
controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs
windows 8.
DC1 is configured as a DHCP server as shown in the exhibit.(Click the Exhibit button.)
Computer1 is configured to obtain an IP address automatically.

You notice that Computer1 is unable to obtain an IP address from DC1
You need to ensure that Computer1 can receive an IP address from DC1.
What should you do?
A.
B.
C.
D.
Disable the Allow filters.

Disable the Deny filters.
Authorize DC1.contoso.com.
Activate Scope [10.1.1.0] Contoso.com.
Correct Answer: A
Section: (none)
Explanation
Red down arrow indicates an unauthorized DHCP server
QUESTION 63
Server1 that runs Windows Server 2012 R2 and has the Remote Access server role installed.
A user named User1 must connect to the network remotely. The client computer of User1 requires Challenge
Handshake Authentication Protocol (CHAP) for remote connections. CHAP is enabled on Server1.
You need to ensure that User1 can connect to Server1 and authenticate to the domain.
What should you do from Active Directory Users and Computers?
A.
B.
C.
D.
From
From
From
From
the properties of User1, select Store password using reversible encryption.

the properties of Server1, assign the Allowed to Authenticate permission to User1.
the properties of User1, select Use Kerberos DES encryption types for this account.
the properties of Server1, select Trust this computer for delegation to any service (Kerberos only).
Correct Answer: A
Section: (none)
Explanation
QUESTION 64
Your network contains an Active Directory forest named contoso.com. All domain controllers currently run
You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2.
The new domain controller will have the following configurations:
Schema master
Global catalog server
DNS Server server role
Active Directory Certificate Services server role
You need to identify which configurations cannot be fulfilled by using the Active Directory Domain Services
Configuration Wizard.
Which two configurations should you identify? (Each correct answer presents part of the solution. Choose two.)
A.
B.
C.
D.
Install the DNS Server role.

Enable the global catalog server.
Install the Active Directory Certificate Services role.
Transfer the schema master.
Correct Answer: CD
Section: (none)
Explanation
Installation Wizard will automatically install DNS and allows for the option to set it as a global catalog server.
ADCS and schema must be done separately.
QUESTION 65
Your network contains an Active Directory domain named adatum.com.
You discover that when users join computers to the domain, the computer accounts are created in the
Computers container.
You need to ensure that when users join computers to the domain, the computer accounts are automatically
created in an organizational unit (OU) named All_Computers.
What should you do?
A.
B.
C.
D.
From
From
From
From
a command prompt, run the redircmp.exe command.

ADSI Edit, configure the properties of the Computers container.
Ldp, configure the properties of the Computers container.
Windows PowerShell, run the Move-ADObjectcmdlet.
Correct Answer: A
Section: (none)
Explanation
Explanation:
This command redirects the default container for newly created computers to a specified, target organizational
unit (OU) so that newly created computer objects are created in the specific target OU instead of in
All_Computers.
References:
QUESTION 66
You log on to a domain controller by using an account named Admin1.Admin1 is a member of the Domain
Admins group.
You view the properties of a group named Group1 as shown in the exhibit. (Click the Exhibit button.)
Group1 is located in an organizational unit (OU) named OU1.

You need to ensure that users from Group1 can modify the Security settings of OU1 only.
What should you do from Active Directory Users and Computers?
A. Right-click OU1 and select Delegate Control.
B. Right-click contoso.com and select Delegate Control.
C. Modify the Security settings of Group1.
D. Modify the Managed By settings on OU1.

Correct Answer: A
Section: (none)
Explanation
Explanation:
Delegating control to only the OU will allow the users of Group1 to modify the security settings.
References:
http://msdn.microsoft.com/en-us/library/windows/desktop/ms676857(v=vs.85).aspx http://
technet.microsoft.com/en-us/library/cc732524.aspx
QUESTION 67
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All
servers runs Windows Server 2012 R2. The domain contains two domain controllers named DC1 and
DC2.Both domain controllers are virtual machines on a Hyper-V host.
You plan to create a cloned domain controller named DC3 from an image of DC1.
You need to ensure that you can clone DC1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A.
B.
C.
D.
E.
Add the computer account of DC3 to the Cloneable Domain Controllers group.
Modify the contents of the DefaultDCCIoneAllowList.xml file on DC1.
Run the Enable-AdOptionalFeaturecmdlet.
Create a DCCIoneConfig.xml file on DC1.
Add the computer account of DC1 to the Cloneable Domain Controllers group.
Correct Answer: DE
Section: (none)
Explanation
Cloneable Domain Controllers Group (located in the Users container).Membership in this group dictates
whether a DC can or cannot be cloned. This group has some permissions set on the domain head that should
not be removed. Removing these permissions will cause cloning to fail. Also, as a best practice, DCs shouldn't
be added to the group until you plan to clone and DCs should be removed from the group once cloning is
complete. Cloned DCs will also end up in the Cloneable Domain Controllers group.
DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it
boots. This includes network settings, DNS, WINS, AD site name, new DC name and more.
QUESTION 68
You create a software restriction policy to allow an application named App1 by using a certificate rule.
You need to ensure that when users attempt to execute App1, the certificate for App1 is verified against a
certificate revocation list (CRL).
What should you do?
A. Modify the rule for App1.
B. Modify the Trusted Publishers Properties.
C. Create a new certificate rule for App1.
D. Modify the Enforcement Properties.

Correct Answer: B
Section: (none)
Explanation
QUESTION 69
Your network contains an Active Directory domain named contoso.com. The domain contains an organizational
unit (OU) named OU1.
You need to ensure that when new client computers join the domain, their computer accounts are created in
OU1 by default.
What should you do?
A.
B.
C.
D.
From
From
From
From
Windows PowerShell, run the Move-ADObjectcmdlet.

a command prompt, run the redircmp.exe command.
ADSI Edit, configure the properties of the OU1 object.
Ldp, configure the properties of the Computers container.
Correct Answer: B
Section: (none)
Explanation
Explanation:
Redirects the default container for newly created computers to a specified, target organizational unit (OU) so
that newly created computer objects are created in the specific target OU instead of in CN=Computers.
The CN=Computers container is a computer-protected object. For backward compatibility reasons, you cannot
(and must not) remove it.
References:
QUESTION 70
Your network contains an Active Directory domain named contoso.com. The domain contains 100 user
accounts that reside in an organizational unit (OU) named OU1.
You need to ensure that a user named User1 can link and unlink Group Policy objects (GPOs) to OU1. The
solution must minimize the number of permissions assigned to User1.
What should you do?
A.
B.
C.
D.
Run the Delegation of Control Wizard on OU1.

Add User1 to the Group Policy Creator Owners group.
Modify the permission on the \\Contoso.com\SYSVOL\Contoso.com\Policies folder.
Modify the permissions on the User1 account.
Correct Answer: A
Section: (none)
Explanation
The Delegation of Control Wizard allows you to delegate tasks, active Directory Object types and to set
permissions.
QUESTION 71
The domain contains a user named User1 and three global security groups named Group1, Group2 and,
Group3.
You need to add User1 to Group1, Group2, and Group3.
A.
B.
C.
D.
E.
F.
G.
H.
Install-AddsDomainControllcr
Install-AddsDomain
Rename-AdObject
Set-AdAccountControl
Set-AdGroup
Set-User
Correct Answer: A
Section: (none)
Explanation
Explanation:
The Add-ADPrincipalGroupMembership cmdlet adds a user, group, service account, or computer as a new
member to one or more Active Directory groups.
References:
http://technet.microsoft.com/en-us/library/ee617203.aspx http://technet.microsoft.com/en-us/library/
hh974723.aspx
QUESTION 72
User1 logs on to a client computer named Computer1.
You need to disable the computer account of Computer1.
A.
B.
C.
D.
E.
F.
G.
H.
Add AdPrincipalGroupMember.hip
Install -AddsDomainController
Install AddsDomain
RonameAdObject
Set-AdGroup
Set-User
Correct Answer: F
Section: (none)
Explanation
Explanation:
The Rename-ADObject cmdlet changes the name of an Active Directory object.
References:
http://technet.microsoft.com/en-us/library/ee617225.aspx
QUESTION 73
named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2.All domain
controllers are configured as DNS servers.
On Server1, you open Server Manager and you add DC2 as another server to manage.
From Server Manager on Server1, you right-click DC2 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you right-click DC2, you see the option to run DNS Manager.
What should you do?
A. On Server1, install the Role Administration Tools.
B. In the domain, add Server1 to the DNS Admins group.
C. On DC2 and Server1, run winrmquickconfig.
D. On DC2, install the Feature Administration Tools.

Correct Answer: A
Section: (none)
Explanation
The Domain Name System (DNS) role is a role that provides a standard method for associating names with
numeric Internet addresses. This lets users refer to network computers by using easy-to-remember names
instead of a long series of numbers. Windows DNS services can be integrated with DHCP services, eliminating
the need to add DNS records as computers are added to the network.
QUESTION 74
Your network contains an Active Directory forest. The forest functional level is Windows Server 2012 R2. The
forest contains a single domain. The domain contains a member server named Server1.Server1 runs windows
Server 2012 R2.
You purchase a network scanner named Scanned that supports Web Services on Devices (WSD).
You need to share the network scanner on Server1.
Which server role should you install on Server1?
A.
B.
C.
D.
Web Server (IIS)

Fax Server
Print and Document Services
File and Storage Services
Correct Answer: C
Section: (none)
Explanation
Explanation:
The Print and Document Services role allows for the configuration to share printers, scanners and fax devices.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 1: Installing and Configuring
servers, Objective 1.2: Configure servers, p. 8 http://technet.microsoft.com/en-us/library/hh831468.aspx
QUESTION 75
Your network contains an Active Directory domain named contoso.com. The domain contains three servers
named Server1, Server2, and Server3.
You create a server group named ServerGroup1.
You discover the error message shown in the following exhibit.(Click the Exhibit button.)
You need to ensure that Server2 can be managed remotely by using Server Manager.
What should you do?
A.
B.
C.
D.
On DC1, run the Enable-PSSessionConfigurationcmdlet.

On Server2, run the Add-Computer cmdlet.
On Server2/ modify the membership of the Remote Management Users group.
From Active Directory Users and Computers, add a computer account named Server2, and then restart
Server2.
Correct Answer: C
Section: (none)
Explanation
This is a security issue. To be able to access Server2 remotely through Server Manager the user need to be a
member of the Remote Management Users group.
QUESTION 76
server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is
VM3 is used to test applications.

You need to prevent VM3 from synchronizing its clock to Server1.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
NUMA topology
Resource control
Resource metering
The VLAN ID
The startup order
Port mirroring
Single-root I/O visualization
Correct Answer: I
Section: (none)
Explanation
Explanation:
Integration Services settings on virtual machines includes services such as operating system shutdown, time
synchronization, data exchange, Heart beat, and Backup (volume snapshot services. Thus you should disable
the time synchronization using Integration Services.
References:
http://blogs.technet.com/b/virtualization/archive/2008/08/29/backing-up-hyper-v-virtual- machines.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p. 144
QUESTION 77
You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails
repeatedly.
You need to ensure that the feature can be installed on Server1.
What should you do?
A.
B.
C.
D.
Install Windows Identity Foundation (WIF) 3.5.

Install the Web Server (IIS) server role.
Connect Server1 to the Internet.
Run the Add-AppxProvisionedPackagecmdlet.
Correct Answer: C
Section: (none)
Explanation
The files needed are no longer available on the local Hard drive. We need to connect the server to the Internet.
Important to note that when starting with Windows Server 2012 R2 and Windows 8, the feature files for .NET
Framework 3.5 (which includes .NET Framework 2.0 and .NET Framework 3.0) are not available on the local
computer by default. The files have been removed. Files for features that have been removed in a Features on
Demand configuration, along with feature files for .NET Framework 3.5, are available through Windows Update.
By default, if feature files are not available on the destination server that is running Windows Server 2012 R2
Preview or Windows Server 2012 R2, the installation process searches for the missing files by connecting to
Windows Update. You can override the default behavior by configuring a Group Policy setting or specifying an
alternate source path during installation, whether you are installing by using the Add Roles and Features Wizard
GUI or a command line.
QUESTION 78
You have a server that runs Windows Server 2012 R2.
The disks on the server are configured as shown in the exhibit.(Click the Exhibit button.)
You need to create a storage pool that contains Disk 1 and Disk 2.
A.
B.
C.
D.
Convert Disk 1 and Disk 2 to GPT disks.

Create a volume on Disk 2.
Convert Disk 1 and Disk 2 to dynamic disks.
Delete volume E.
Correct Answer: D
Section: (none)
Explanation
Explanation:
Storage Pools use unallocated space thus you need to delete Volume E.
References:
http://technet.microsoft.com/en-us/library/ff399688.aspx
QUESTION 79
You have a server named Server1 that runs Windows Server 2012 R2. You add an additional disk to Server1
as shown in the exhibit.(Click the Exhibit button.)
You need to ensure that users can access the additional disk from drive C.
What should you do?
A.
B.
C.
D.
Convert Disk 0 to a dynamic disk and add a mirror.

Create a simple volume on Disk 1 and mount the volume to a folder.
Convert Disk 0 and Disk 1 to dynamic disks and extend a volume.
Convert Disk 1 to a dynamic disk and create a spanned volume.
Correct Answer: B
Section: (none)
Explanation
QUESTION 80
You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter.
You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit.
(Click the Exhibit button.)
You review the installed features on Server1 as shown in the Features exhibit.(Click the Exhibit button.)
You need to install the Server Graphical Shell feature on Server1.

Which two possible sources can you use to achieve this goal? (Each correct answer presents a complete
solution. Choose two.)
A.
B.
C.
D.
Index 1
Index 2
Index 3
Index 4
Correct Answer: BD
Section: (none)
Explanation
Explanation:
When you install Windows Server 2012 R2, you can choose between Server Core Installation and Server with a
GUI. The "Server with a GUI" option is the Windows Server 2012 R2 equivalent of the Full installation option
available in Windows Server 2008 R2. The "Server Core Installation" option reduces the space required on
disk, the potential attack surface, and especially the servicing requirements, so we recommend that you choose
the Server Core installation unless you have a particular need for the additional user interface elements and
graphical management tools that are included in the "Server with a GUI" option. For this reason, the Server
Core installation is now the default. Because you can freely switch between these options at any time later, one
approach might be to initially install the Server with a GUI option, use the graphical tools to configure the server,
and then later switch to the Server Core Installation option.
Reference: Windows Server Installation Options
QUESTION 81
Your network contains several servers that run Windows Server 2012 R2 and client computers that run
Windows 8.1.
You download several signed Windows PowerShell scripts from the Internet.
You need to run the PowerShell scripts on all of the servers and all of the client computers.
What should you modify first?
A.
B.
C.
D.
The environment variables on all of the servers

The execution policy on all of the servers
The execution policy on all of the client computers
The environment variables on all client computers
Correct Answer: C
Section: (none)
Explanation
First modify the environment variables on the server, then modify them on client computers.
QUESTION 82
Server1 has following storage spaces:
Data
Users
Backups
Primordial
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk.
Which storage space contains the new disk?
A.
B.
C.
D.
Primordial
Data
Users
Backups
Correct Answer: A
Section: (none)
Explanation
QUESTION 83
named L0N-DC1.L0N-DC1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
The network contains 100 client computers and 50 IP phones. The computers and the phones are from the
same vendor.
You create an IPv4 scope that contains addresses from 172.16.0.1 to 172.16.1.254.
You need to ensure that the IP phones receive IP addresses in the range of 172.16.1.100 to 172.16.1.200. The
solution must minimize administrative effort.
What should you create?
A.
B.
C.
D.
Server level policies

Reservations
Filters
Scope level policies
Correct Answer: C
Section: (none)
Explanation
Explanation:
The scope is already in place.
Scope level policies are typically settings that only apply to that scope. They can also overwrite a setting that
was set at the server level.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, p.253
QUESTION 84
You have two servers named Server1 and Server2 that run Windows Server 2012 R2.Server1 has the DHCP
Server server role installed.
You need to create an IPv6 reservation for Server2.
Which two values should you obtain from Server2? (Each correct answer presents part of the solution. Choose
two.)
A.
B.
C.
D.
E.
the hardware ID
the DHCPv6 unique identifier
the DHCPv6 identity association ID
the SMSBIOS GUID
the MAC address
Correct Answer: BC
Section: (none)
Explanation
Explanation:
The Add-DhcpServerv6Reservation cmdlet reserves a specified IPv6 address for the client identified by the
specified Dynamic Host Configuration Protocol (DHCP) v6 unique identifier (ID) (DUID) and identity association
ID (IAID).
QUESTION 85
Your company has a main office and four branch offices. The main office contains a server named Server1 that
runs Windows Server 2012 R2.
The IP configuration of each office is configured as shown in the following tablE.
You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all
of the subnets.
Which command should you run?
A.
B.
C.
D.
route.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1

Correct Answer: B
Section: (none)
Explanation
Explanation:
These parameters will allow communication with all the hosts.
References:
core network services, Objective 4.1: Configure IPv4 and IPv6 addressing, p.192, 196
QUESTION 86
Your network contains an Active Directory domain named contoso.com. The network contains 500 client
computers that run Windows 8.All of the client computers connect to the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2.Server1 has the DNS Server server
role installed.
You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
A.
B.
C.
D.
Create a primary zone named "root".

Create a primary zone named "GlobalNames".
Create a forwarder that points to 169.254.0.1.
Create a primary zone named ".".
Correct Answer: A
Section: (none)
Explanation
QUESTION 87
Your network contains two Active Directory forests named contoso.com and adatum.com. Each forest contains
one domain. A two-way forest trust exists between the forests.
The forests use the address spaces shown in the following table.
From a computer in the contoso.com domain, you can perform reverse lookups for the servers in the
contoso.com domain, but you cannot perform reverse lookups for the servers in the adatum.com domain.
From a computer in the adatum.com domain, you can perform reverse lookups for the servers in both domains.
You need to ensure that you can perform reverse lookups for the servers in the adatum.com domain from the
computers in the contoso.com domain.
A.
B.
C.
D.
A trust point
A GlobalNames zone
A delegation
A conditional forwarder
Correct Answer: D
Section: (none)
Explanation
Explanation:
Conditional forwarders are DNS servers that only forward queries for specific domain names. Instead of
forwarding all queries it cannot resolve locally to a forwarder, a conditional forwarder is configured to forward a
query to specific forwarders based on the domain name contained in the query. Forwarding in terms of domain
names improves conventional forwarding by adding a name-based condition to the forwarding process.
References:
QUESTION 88
installed.
The disks on Server1 are configured as shown in the exhibit.(Click the Exhibit button.)
You create a virtual machine on Server1.

You need to ensure that you can configure a pass-through disk for the virtual machine.
What should you do?
A. Convert Disk 1 to a GPT disk.
B. Delete partition E.
C. Convert Disk 1 to a dynamic disk.

D. Take Disk 1 offline.
Correct Answer: D
Section: (none)
Explanation
Explanation/References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 3.2: Create and Configure
virtual machine storage, Chapter 3: p. 159 Exam Ref 70-410: Installing and Configuring Server 2012: Objective
1.3: Installing and Configuring servers, Chapter 1: p. 42-43
http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-in-hyper- v.aspx
QUESTION 89
You need to create a 3-TB virtual hard disk (VHD) on Server1.
A.
B.
C.
D.
Share and Storage Management

New-StoragePool
New-VirtualDisk
Diskpart
Correct Answer: D
Section: (none)
Explanation
QUESTION 90
named Server 1.Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.
The DHCP clients in Subnet1 can connect to the client computers in Subnet2 by using an IP address or a
FQDN.
You discover that the DHCP clients in Subnet2 can connect to client computers in Subnet1 by using an IP
address only.
You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a
FQDN.
What should you add?
A. The 015 DNS Domain Name option to Subnet1
B. The 015 DNS Domain Name option to Subnet2

C. The 006 DNS Servers option to Subnet2
D. The 006 DNS Servers option to Subnet1
Correct Answer: C
Section: (none)
Explanation
References:
http://technet.microsoft.com/en-us/library/ee941136%28v=WS.10%29.aspx Training Guide: Installing and
Configuring Windows Server 2012 R2, Chapter 6: Network Administration, p.253
QUESTION 91
You have a server named dc2.contoso.com that runs Windows Server 2012 R2 and has the DNS Server server
role installed.
You open DNS Manager as shown in the exhibit.(Click the Exhibit button.)
You need to view the DNS server cache from DNS Manager.
A.
B.
C.
D.
From
From
From
From
the View menu, click Filter...

the Action menu, click Configure a DNS Server...
the Action menu, click Properties.
the View menu, click Advanced.
Correct Answer: D
Section: (none)
Explanation
Explanation:
Navigating the DNS Manager console you should go to the View menu and click the Advanced tab. That will
yield the DNS server cache.
References:
http://technet.microsoft.com/en-us/library/ee683892%28v=WS.10%29.aspx
QUESTION 92
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A.
B.
C.
D.
From
From
From
From
the Services console, configure the General settings.

Windows PowerShell, run Set-Service and specify the -StartupType parameter.
a command prompt, run sc.exe and specify the config parameter.
a command prompt, run sc.exe and specify the privs parameter.
Correct Answer: C
Section: (none)
Explanation
Explanation:
Executing the ss.exe command with the config parameter will modify service configuration.
QUESTION 93
You plan to deploy a file server to a temporary location.
The temporary location experiences intermittent power failures. The file server will contain a dedicated volume
for shared folders.
You need to create a volume for the shared folders. The solution must minimize the likelihood of file corruption
if a power failure occurs.
Which file system should you use?
A.
B.
C.
D.
NFS
FAT32
ReFS
NTFS
Correct Answer: C
Section: (none)
Explanation
The ReFS file system allows for resiliency against corruptions with the option to salvage amongst many other
key features like Metadata integrity with checksums, Integrity streams with optional user data integrity, and
shared storage pools across machines for additional failure tolerance and load balancing, etc.
QUESTION 94
Your network contains a Windows Server 2012 R2 image named Server12.wim.Server12.wim contains the
images shown in the following table.
You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Datacenter
image.
You want to achieve this goal by using the minimum amount of administrative effort.
Which command should you run first?
A.
B.
C.
D.
dism.exe /image:c:\Server12.wim /enable-feature /featurename:servermigration

dism.exe /mount-wim /wimfile:c:\Server12.wim /index:4 /mountdir:c:\mount
imagex.exe /capture c: c:\Server12.wim "windows server 2012 r2 datacenter"
imagex.exe /apply c:\Server12.wim 4 c:\
Correct Answer: B
Section: (none)
Explanation
Explanation:
This command will mount the image before making any changes.
References:
dd744382(v=ws.10).aspx
QUESTION 95
You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
A.
B.
C.
D.
The Install-WindowsFeaturecmdlet
The Install-Module cmdlet
The Install-RoleServicecmdlet
The setup.exe command
Correct Answer: A
Section: (none)
Explanation
The DISM command is called by the Add-WindowsFeature commanD. Here is the syntax for DISM:
Dism /online /enable-feature /featurename:ServerCore-FullServer /featurename:Server-Gui-Shell /
featurename:Server-Gui-Mgmt
QUESTION 96
Server2 establishes an IPSec connection to Server1.
You need to view which authentication method was used to establish the initial IPSec connection.
What should you do?
A.
B.
C.
D.
From
From
From
From
Windows Firewall with Advanced Security, view the quick mode security association.
Event Viewer, search the Application Log for events that have an ID of 1704.
Event Viewer, search the Security Log for events that have an ID of 4672.
Windows Firewall with Advanced Security, view the main mode security association.
Correct Answer: D
Section: (none)
Explanation
Explanation:
Main mode negotiation establishes a secure channel between two computers by determining a set of
cryptographic protection suites, exchanging keying material to establish a shared secret key, and authenticating
computer and user identities. A security association (SA) is the information maintained about that secure
channel on the local computer so that it can use the information for future network traffic to the remote
computer. You can monitor main mode SAs for information like which peers are currently connected to this
computer and which protection suite was used to form the SA.
References:
http://technet.microsoft.com/en-us/library/dd448497(v=ws.10).aspx
QUESTION 97
You create a security template named Template1 by using the Security Templates snap-in.
You need to apply Template1 to Server2.
A.
B.
C.
D.
System Configuration
Local Security Policy
Certificate Templates
computer Management
Correct Answer: B
Section: (none)
Explanation
Explanation:
A security policy is a combination of security settings that affect the security on a computer. You can use your
local security policy to edit account policies and local policies on your local computer.
QUESTION 98
Your network contains an Active Directory domain named contoso.com. All of the AppLocker policy settings for
the member servers are configured in a Group Policy object (GPO) named GPO1.
A member server named Server1 runs Windows Server 2012 R2.
On Server1, you test a new set of AppLocker policy settings by using a local computer policy. You need to
merge the local AppLocker policy settings from Server1 into the AppLocker policy settings of GPO1.
What should you do?
A. From Local Group Policy Editor on Server1, export an .inf file. Import the .inf file by using Group Policy
Management Editor.
B. From Server1, run the Set-ApplockerPolicycmdlet.
C. From Local Group Policy Editor on Server1, export an .xml file. Import the .xml file by using Group Policy
Management Editor.
D. From Server1, run the New-ApplockerPolicycmdlet.
Correct Answer: B
Section: (none)
Explanation
Explanation:
The Set-AppLockerPolicy cmdlet sets the specified Group Policy Object (GPO) to contain the specified
AppLocker policy. If no Lightweight Directory Access Protocol (LDAP) is specified, the local GPO is the default.
When the Merge parameter is used, rules in the specified AppLocker policy will be merged with the AppLocker
rules in the target GPO specified in the LDAP path. The merging of policies will remove rules with duplicate rule
IDs, and the enforcement setting specified by the AppLocker policy in the target GPO will be preserved. If the
Merge parameter is not specified, then the new policy will overwrite the existing policy.
References:
http://technet.microsoft.com/en-us/library/ee791816(v=ws.10).aspx Exam Ref 70-410: Installing and configuring
Windows Server 2012 R2, Chapter 10:
Implementing Group Policy, Lesson1: Planning, Implementing and managing Group Policy, p.
QUESTION 99
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document
Services server role installed.
Server1 is connected to two identical print devices.
The solution must ensure that if one print device fails, the print jobs will print automatically on the other print
device.
A.
B.
C.
D.
Add two printers and configure the priority of each printer.

Install the Failover Clustering feature, and then add one printer.
Install the Network Load Balancing (NLB) feature, and then add one printer.
Add one printer and configure printer pooling.
Correct Answer: D
Section: (none)
Explanation
Explanation:
By adding one printer as the default printer you ensure that only that printer is used at a time, and creating a
printing pool to automatically distribute print jobs to the next available printer will cover all the requirements
stated in the question. A printing pool is one logical printer connected to multiple printers through multiple ports
of the print server. The printer that is idle receives the next document sent to the logical printer.
A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The
printer that is idle receives the next document sent to the logical printer. This is useful in a network with a high
volume of printing because it decreases the time users wait for their documents. A printing pool also simplifies
administration because multiple printers can be managed from the same logical printer on a server.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 2.3 Configure print and
document services, Chapter 2: Configure Server roles and Features, p. 93, 97 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 8: File Services and Storage, p. 361
cc784619(v=ws.10).aspx http://technet.microsoft.com/en-us/library/jj556311.aspx
QUESTION 100
You have two servers named Server1 and Server2 that run Windows Server 2012 R2.Server1 and Server2 are
part of a workgroup.
On Server1, you add Server2 to Server Manager.
When you attempt to connect to Server2 from Server Manager, you receive the following error message:
"Credentials not valid."
You need to ensure that you can manage Server2 from Server1 by using Server Manager on Server1.
What should you do?
A.
B.
C.
D.
On Server1, run the Set-Item cmdlet.

On Server 1, run the Set-NetFirewallRulecmdlet.
On Server 2, install the Remote Server Administration Tools (RSAT).
On Server2, run the Configure-SmRemotingcmdlet.
Correct Answer: D
Section: (none)
Explanation
QUESTION 101
named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2.
On DC2, you open Server Manager and you add Server1 as another server to manage.
From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you right-click Server1, you see the option to run the DHCP console.
What should you do?
A.
B.
C.
D.
In the domain, add DC2 to the DHCP Administrators group.

On Server1, install the Feature Administration Tools,
On DC2 and Server1, run winrmquickconfig.
On DC2, install the Role Administration Tools.
Correct Answer: D
Section: (none)
Explanation
References:
http://technet.microsoft.com/en-us/library/ee441255(v=ws.10).aspx
QUESTION 102
Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2
Service Pack 1 (SP1).Both servers are member servers.
On Server2, you install all of the software required to ensure that Server2 can be managed remotely from
Server Manager.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform on Server2? (Each correct answer presents part of the solution.Choose
two.)
A.
B.
C.
D.
E.
Run the systempropertiesremotE. execommanD.

Run the Fnable-PsRemotingcmdlet.
Run the Enable-PsSessionConfigurationcmdlet.
Run the Confiqure-SMRemoting.ps1script.
Run the Set-ExecutionPolicycmdlet.
Correct Answer: DE
Section: (none)
Explanation
Explanation:
The output of this command indicates whether Server Manager Remoting is enabled or disabled on the server.
To configure Server Manager remote management by using Windows PowerShell On the computer that you
want to manage remotely, open a Windows PowerShell session with elevated user rights.To do this, click Start,
click All Programs, click Accessories, click Windows PowerShell, right-click the Windows PowerShell shortcut,
and then click Run as administrator. In the Windows PowerShell session, type the following, and then press
Enter.
Set-ExecutionPolicy -ExecutionPolicyRemoteSigned
Type the following, and then press Enter to enable all required firewall rule exceptions.
Configure-SMRemoting.ps1 -force enable
QUESTION 103
controller named Server1 that runs Windows Server 2012 R2.
On Server1, you create a work folder named Work1.
A user named User1 connects to Work1 from a computer named Computer1.
You need to identify the last time the documents in Work1 were synchronized successfully from Computer1.
What should you do?
A.
B.
C.
D.
From
From
From
From
Server Manager, review the properties of Computer1.

Windows PowerShell, run the Get-SyncUserSettingscmdlet.
Windows PowerShell, run the Get-SyncSharecmdlet.
Server Manager, review the properties of User1.
Correct Answer: D
Section: (none)
Explanation
QUESTION 104
controller named DC1 that runs Windows Server 2012 R2.
A user named User1 attempts to log on to DC1, but receives the error message shown in the exhibit.(Click the
Exhibit button.)
You need to ensure that User1 can log on to DC1.

What should you do?
A.
B.
C.
D.
Add User1 to the Remote Management Users group.

Grant User1 the Allow log on locally user right.
Modify the Logon Workstations setting of the User1 account.
Modify the Account is sensitive and cannot be delegated setting of the User1 account.
Correct Answer: B
Section: (none)
Explanation
Explanation:
Domain controllers, by default, restrict the types of user accounts that have the ability to log on locally.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 6: Create and Manage Group
Policy, Objective 6.2: Configure Security Policies, p. 321 Exam Ref 70-410: Installing and Configuring Windows
Server 2012 R2, Chapter 2: Configure server roles and features, Objective 2.3: Configure servers for remote
management, p. 114 http://technet.microsoft.com/en-us/library/ee957044(v=ws.10).aspx
QUESTION 105
Your network contains an Active Directory domain named contoso.com. The domain contains hundreds of
groups, many of which are nested in other groups.
The domain contains a user account named user1.User1 is a direct member of 15 groups.
You need to identify of which Active Directory groups User1 is a member, including the nested groups. The
solution must minimize administrative effort.
A.
B.
C.
D.
Active Directory Users and Computers

ADSI Edit
Get-ADUser
Dsget
Correct Answer: D
Section: (none)
Explanation
QUESTION 106
You have a new server named Server1 that runs Windows Server 2012 R2.
Server1 has two dual-core processors and 32 GB of RAM.
You install the Hyper-V server role on Server1.
You create two virtual machines on Server1 that each have 8 GB of memory.
You need to minimize the amount of time it takes for both virtual machines to access memory.
What should you configure on each virtual machine?
A.
B.
C.
D.
Resource control
Memory weight
Dynamic Memory
NUMA topology
Correct Answer: D
Section: (none)
Explanation
QUESTION 107
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
VM1 has several snapshots.

What should you do?
A.
B.
C.
D.
Delete the existing snapshots, and then modify the settings of VM1.
Right-click VM1, and then click Move. ..
Right-click VM1, and then click Export...
PauseVM1, and then modify the settings of VM1.
Correct Answer: A
Section: (none)
Explanation
you will need to navigate to the Hyper-V Management snap-in
(C:\ProgramData\Microsoft\Windows\Hyper-V) and from there access the Snapshot file Location tab where you
can change the settings for the VM1 snapshot file location. However, since there are already several snapshots
in existence, you will need to delete them first because you will not be able to change the location of the
snapshot file while there is an existing snapshot.
QUESTION 108
You plan to create a shared folder. The shared folder will have a quota limit.
You discover that when you run the New Share Wizard, you cannot select the SMB Share - Advanced option.
You need to ensure that you can use SMB Share - Advanced to create the new share.
What should you do on Server1 before you run the New Share Wizard?
A.
B.
C.
D.
Configure the Advanced system settings.

Run the Install-WindowsFeaturecmdlet.
Run the Set-SmbSharecmdlet.
Install the Share and Storage Management tool.
Correct Answer: B
Section: (none)
Explanation
Explanation:
Install-WindowsFeature will install one or more Windows Server roles, role services, or features on either the
local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and
replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features in
QUESTION 109
On Server1, you create a printer named Printed. You share Printed and publish Printed in Active Directory.
You need to provide a group named Group1 with the ability to manage Printer1.
What should you do?
A.
B.
C.
D.
From
From
From
From
Print Management, configure the Sharing settings of Printer1.

Active Directory Users and Computers, configure the Security settings of Server1- Printer1.
Print Management, configure the Security settings of Printer1.
Print Management, configure the Advanced settings of Printer1.
Correct Answer: C
Section: (none)
Explanation
Explanation:
If you navigate to the Security tab of the Print Server Properties you will find the Permissions that you can set to
Allow which will provide Group1 with the ability to manage Printer1.
Set permissions for print servers
1. Open Print Management.
2. In the left pane, clickPrint Servers, right-click the applicable print server and then clickProperties.
3. On theSecuritytab, underGroup or users names, click a user or group for which you want to set permissions.
4. UnderPermissions for <user or group name>, select theAlloworDenycheck boxes for the permissions listed
as needeD.
5. To editSpecial permissions, clickAdvanceD.
6. On thePermissionstab, click a user group, and then clickEdit.
7. In thePermissionEntrydialog box, select theAlloworDenycheck boxes for the permissions that you want to
edit.
QUESTION 110
You have a server named Print1 that runs Windows Server 2012 R2.
On Print1, you share a printer named Printer1.
You need to ensure that only the members of the Server Operators group, the Administrators group, and the
Print Operators group can send print jobs to Printer1.
What should you do?
A.
B.
C.
D.
Remove the permissions for the Creator Owner group.

Assign the Print permission to the Server Operators group.
Remove the permissions for the Everyone group.
Assign the Print permission to the Administrators group.
Correct Answer: C
Section: (none)
Explanation
By default Everyone can print. This permissions need to be removed.
QUESTION 111
A network technician installs a new disk on Server1 and creates a new volume. The properties of the new
volume are shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can restore files on volume D by using the Previous Versions tab
A.
B.
C.
D.
Install the File Server Resource Manager role service.

Run the convert.exe command.
Format volume D.
Correct Answer: D
Section: (none)
Explanation
QUESTION 112
On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2.You join
Server2 to the contoso.com domain.

You need to ensure that you can manage Server2 by using the Computer Management console on Server1.
A.
B.
C.
D.
Install Windows Management Framework.

Run sconfig.exe and configure Remote Server Administration Tools (RSAT).
Install Remote Server Administration Tools (RSAT).
Run sconfig.exe and configure remote management.
Correct Answer: D
Section: (none)
Explanation
Explanation:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage
several common aspects of Server Core installations. You must be a member of the Administrators group to
use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.
References:
http://technet.microsoft.com/en-us/library/jj647766.aspx Training Guide: Installing and Configuring Windows
Server 2012 R2, Chapter 2: Deploying servers, p. 80
QUESTION 113
You connect three new hard disks to Server1.
You need to create a storage space that contains the three disks.
The solution must meet the following requirements:
Provide fault tolerance if a single disk fails.
Maximize the amount of useable storage space.
A.
B.
C.
D.
A mirrored space
A spanned volume
A parity space
A simple space
Correct Answer: C
Section: (none)
Explanation
Explanation:
Fault tolerant and better space ratio. The data on volumes created on this type of virtual disk, together with
parity information that can be used to facilitate automatic reconstruction of data in the event of a physical disk
failure, is striped across all physical disks in the pool. Parity virtual disks also provide resiliency to help protect
you from data loss arising from the failure 368 Chapter 8 File services and storage of a physical disk in the
pool, but they perform better with large sequential disk writes than with random I/O.
References:
http://social.technet.microsoft.com/wiki/contents/articles/15198.storage-spaces-overview.aspx http://
technet.microsoft.com/en-us/library/cc772180.aspx Training Guide: Installing and Configuring Windows Server
2012 R2: Chapter 8: File Services and Storage, p. 367-8
QUESTION 114
R2.Client computers run either Windows 7 or Windows 8.
All of the computer accounts of the client computers reside in an organizational unit (OU) named Clients. A
Group Policy object (GPO) named GPO1 is linked to the Clients OU. All of the client computers use a DNS
server named Server1.
You configure a server named Server2 as an ISATAP router. You add a host (A) record for ISATAP to the
contoso.com DNS zone.
You need to ensure that the client computers locate the ISATAP router.
What should you do?
A.
B.
C.
D.
Run the Set-DnsServerGlobalQueryBlockListcmdlet on Server1,

Configure the Network Options Group Policy preference of GPO1.
Run the Add-DnsServerResourceRecordcmdlet on Server1.
Configure the DNS Client Group Policy setting of GPO1.
Correct Answer: A
Section: (none)
Explanation
Explanation:
The Set-DnsServerGlobalQueryBlockList command will change the settings of a global query block list which
you can use to ensure that client computers locate the ISATAP router.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 4: Deploying domain controllers,
Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 254-256 http://technet.microsoft.com/en-us/library/jj649942
(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649876(v=wps.620).aspx http://
technet.microsoft.com/en-us/library/jj649874.aspx http://technet.microsoft.com/en-us/library/jj649909.aspx
QUESTION 115
You are configuring the IPv6 network infrastructure for a branch office.
The corporate network administrator allocates the 2001:DB8:0:C000::/58 address space for use in the branch
office.
You need to identify the maximum number of IPv6 subnets you can create.
How many IPv6 subnets should you identify?
A.
B.
C.
D.
32
64
128
1024
Correct Answer: B
Section: (none)
Explanation
Explanation:
IPv6 has 128-bit (16-byte) source and destination IP addresses. Although 128 bits can express over 3.41038
possible combinations, the large address space of IPv6 has been designed for multiple levels of subnetting and
address allocation from the Internet backbone to the individual subnets within an organization.
References:
http://technet.microsoft.com/en-us/library/dd379516%28v=WS.10%29.aspx
QUESTION 116
Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2.
You create a checkpoint of VM1, and then you install an application on VM1.You verify that the application runs
properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk file.
The solution must minimize the amount of downtime on VM1.
What should you do?
A.
B.
C.
D.
From
From
From
From
a command prompt, run dism.exe and specify the /delete-image parameter.

a command prompt, run dism.exe and specify the /commit-image parameter.
Hyper-V Manager, delete the checkpoint.
Hyper-V Manager, inspect the virtual hard disk.
Correct Answer: C
Section: (none)
Explanation
QUESTION 117
Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 has a virtual
switch named RDS Virtual.
You replace all of the network adapters on Server1 with new network adapters that support single-root I/O
visualization (SR-IOV).
You need to enable SR-IOV for all of the virtual machines on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A.
B.
C.
D.
E.
On each virtual machine, modify the Advanced Features settings of the network adapter.
Modify the settings of the RDS Virtual virtual switch.
On each virtual machine, modify the BIOS settings.
Delete, and then recreate the RDS Virtual virtual switch.
On each virtual machine, modify the Hardware Acceleration settings of the network adapter.
Correct Answer: DE
Section: (none)
Explanation
Explanation:
The first step when allowing a virtual machine to have connectivity to a physical network is to create an external
virtual switch using Virtual Switch Manager in Hyper-V Manager. The additional step that is necessary when
using SR-IOV is to ensure the checkbox is checked when the virtual switch is being created. It is not possible to
change a "non SR-IOV mode" external virtual switch into an "SR-IOV mode" switch. The choice must be made
a switch creation time. Thus you should first delete the existing virtual switch and then recreate it.
E: Once a virtual switch has been created, the next step is to configure a virtual machine. SR- IOV in Windows
Server "8" is supported on x64 editions of Windows "8" as a guest operating system (as in Windows "8" Server,
and Windows "8" client x64, but not x86 client).We have rearranged the settings for a virtual machine to
introduce sub-nodes under a network adapter, one of which is the hardware acceleration node. At the bottom is
a checkbox to enable SR-IOV.
QUESTION 118
Server1 that runs Windows Server 2012 R2.Server1 contains a virtual machine named VM1 that runs Windows
Server 2012 R2.
You need to ensure that a user named User1 can install Windows features on VM1. The solution must
minimize the number of permissions assigned to User1.
To which group should you add User1?
A.
B.
C.
D.
Hyper-V Administrators on Server1

Administrators on VM1
Server Operators on Server1
Power Users on VM1
Correct Answer: B
Section: (none)
Explanation
Explanation:
The user has to be an administrator on VM1 to be able to install features.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10: Implementing Group Policy,
p.539
QUESTION 119
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2 Datacenter.Server1 is located in
an isolated network that cannot access the Internet.
On Server1, you install a new virtual machine named VM1.VM1 runs Windows Server 2012 R2 Essentials and
connects to a private virtual network.
After 30 days, you discover that VM1 shuts down every 60 minutes.
You need to resolve the issue that causes VM1 to shut down every 60 minutes.
What should you do?
A.
B.
C.
D.
OnVM1, run slmgr.exe and specify the /ipk parameter.

OnServer1, run slmgr.exe and specify the /rearm-sku parameter.
Create a new internal virtual network and attach VM1 to the new virtual network.
On Server1, run Add-WindowsFeatureVolumeActivation.
Correct Answer: A
Section: (none)
Explanation
QUESTION 120
Your network contains a production Active Directory forest named contoso.com and a test Active Directory
forest named contoso.test. A trust relationship does not exist between the forests.
In the contoso.test domain, you create a backup of a Group Policy object (GPO) named GPO1.
You transfer the backup of GPO1 to a domain controller in the contoso.com domain.
You need to create a GPO in contoso.com based on the settings of GPO1.You must achieve this goal by using
the minimum amount of administrative effort.
What should you do?
A. From Windows PowerShell, run the Get- GPO cmdlet and the Copy- GPO cmdlet.
B. From Windows PowerShell, run the New- GPO cmdlet and the Import- GPO cmdlet.
C. From Group Policy Management, create a new starter GPO.Right-click the new starter GPO, and then click
Restore from Backup.
D. From Group Policy Management, right-click the Croup Policy Objects container, and then click Manage
Backups.
Correct Answer: B
Section: (none)
Explanation
Explanation:
Since the GPO's original domain is different and there is no trust relationship between forests, you should
execute the New-GPO command and import the already existing command into the `new' domain.
QUESTION 121
An organizational unit (OU) named OU1 contains the computer accounts for laptops and desktop computers.
A Group Policy object (GPO) named GP1 is linked to OU1.
You need to ensure that the configuration settings in GP1 are applied only to a user named User1.
What should you do?
A.
B.
C.
D.
Modify the security settings of OU1.

Modify the GPO Status of GP1.
Modify the security settings of GP1.
Configure the WMI Filter of GP1.
Correct Answer: C
Section: (none)
Explanation
Explanation:
WMI filtering
Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group
Policy objects (GPOs) based on attributes of the target computer. When a GPO that is linked to a WMI filter is
applied on the target computer, the filter is evaluated on the target computer. If the WMI filter evaluates to false,
the GPO is not applied (except if the client computer is running Windows Server, in which case the filter is
ignored and the GPO is always applied). If the WMI filter evaluates to true, the GPO is applied.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10: Implementing Group Policy,
p. 470, 482
http://technet.microsoft.com/en-us/library/jj134176
WMI filtering using GPMC
QUESTION 122
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows
Server 2012 R2.
You create and enforce the default AppLocker executable rules.
Users report that they can no longer execute a legacy application installed in the root of drive C.
You need to ensure that the users can execute the legacy application.
What should you do?
A.
B.
C.
D.
Create a new rule.

Delete an existing rule.
Modify the action of the existing rules.
Add an exception to the existing rules.
Correct Answer: A
Section: (none)
Explanation
QUESTION 123
You need to ensure that User1 can manage the group membership of Group1. The solution must minimize the
number of permissions assigned to User1.
A.
B.
C.
D.
E.
F.
G.
H.
Install-AddsDomain
Rename AdOh
Set-AdGroup
Set-User
Correct Answer: G
Section: (none)
Explanation
Explanation:
The Set-ADGroup cmdlet modifies the properties of an Active Directory group. You can modify commonly used
property values by using the cmdlet parameters. ManagedBy Specifies the user or group that manages the
object by providing one of the following property values. Note:
The identifier in parentheses is the LDAP display name for the property.
Distinguished Name
Example: CN=SaraDavis,OU=Europe,CN=Users,DC=corp,DC=contoso,DC=com GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Security Identifier (objectSid)
Example: S-1-5-21-3165297888-301567370-576410423-1103
SAM Account Name (sAMAccountName)
Example: saradavis
The Install-ADDSDomainController cmdlet installs a domain controller in Active Directory. Example: C:
\PS>Install-ADDSDomainController -InstallDns -Credential (Get-Credential CORP\Administrator) DomainName "corp.contoso.com"
References:
http://technet.microsoft.com/en-us/library/hh974723.aspx http://technet.microsoft.com/en-us/library/
ee617199.aspx http://technet.microsoft.com/en-us/library/ee617225.aspx
QUESTION 124
The password policy for the domain is set to require a minimum password length of 10 characters.
A user named User1 and a user named User2 work for the sales department.
User1 is forced to create a domain password that has a minimum of 12 characters.User2 is forced to create a
domain password that has a minimum of eight characters.
You need to identify what forces the two users to have different password lengths.
A.
B.
C.
D.
Group Policy Management

Credential Manager
Active Directory Administrative Center
Security Configuration Wizard (SCW)
Correct Answer: C
Section: (none)
Explanation
Explanation:
In Windows Server 2008, you can use fine-grained password policies to specify multiple password policies and
apply different password restrictions and account lockout policies to different sets of users within a single
domain. For example, to increase the security of privileged accounts, you can apply stricter settings to the
privileged accounts and then apply less strict settings to the accounts of other users. Or in some cases, you
may want to apply a special password policy for accounts whose passwords are synchronized with other data
sources. This is found in the Active Directory Administrative Center. You can use Active Directory
Administrative Center to perform the following Active Directory administrative tasks:
Create new user accounts or manage existing user accounts Create new groups or manage existing groups
Create new computer accounts or manage existing computer accounts Create new organizational units (OUs)
and containers or manage existing OUs Connect to one or several domains or domain controllers in the same
instance of Active Directory Administrative Center, and view or manage the directory information for those
domains or domain controllers

Filter Active Directory data by using query-building search
References:
QUESTION 125
An organizational unit (OU) named OU1 contains user accounts and computer accounts.
A Group Policy object (GPO) named GP1 is linked to the domain.GP1 contains Computer Configuration
settings and User Configuration settings.
You need to prevent the User Configuration settings in GP1 from being applied to users. The solution must
ensure that the Computer Configuration settings in GP1 are applied to all client computers.
A.
B.
C.
D.
The GPO Status

The Block Inheritance feature
The Group Policy loopback processing mode
The Enforced setting
Correct Answer: C
Section: (none)
Explanation
QUESTION 126
R2. The domain contains a server named Server1.
You open Review Options in the Active Directory Domain Services Configuration Wizard, and then you click
View script.
You need to ensure that you can use the script to promote Server1 to a domain controller.
Which file extension should you use to save the script?
A.
B.
C.
D.
.bat
.cmd
.psl
.xml
Correct Answer: C
Section: (none)
Explanation
Explanation:
Creating a batch file would be best practice because the process involved to promote a server to a domain
controller involves several commands that can be configured into a batch file in a script.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 5: Install and Administer Active
Directory, Objective 5.1 Install Domain Controllers, p. 251-256 Exam Ref: 70-410: Installing and Configuring
Windows Server 2012 R2, Chapter 6: Create and manage Group Policy, Objective 6.3: Configure application
restriction policies, p.342 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 4:
Deploying Domain Controllers, Lesson 2: Deploying domain controllers using Server Manager, p. 146
QUESTION 127
Your network contains an Active Directory forest named contoso.com. The forest contains five domains. All
domain controllers run Windows Server 2012 R2.
The contoso.com domain contains two user accounts named Admin1 and Admin2.
You need to ensure that Admin1 and Admin2 can configure hardware and services on all of the member
servers in the forest. The solution must minimize the number of privileges granted to Admin1 and Admin2.
Which built-in groups should you use?
A.
B.
C.
D.
Administrators local groups

Administrators domain local groups
Domain Admins global groups
Server Operators global groups
Correct Answer: A
Section: (none)
Explanation
QUESTION 128
An administrator provides you with a file that contains the information to create user accounts for 200 temporary
employees. The file is shown in the exhibit.(Click the Exhibit button.)
You need to automate the creation of the user accounts. You must achieve this goal by using the minimum
amount of administrative effort.
A.
B.
C.
D.
Ldifde
csvde
Dsadd
Net user
Correct Answer: B
Section: (none)
Explanation
Explanation:
The CSVDE is a command-line utility that can create new AD DS objects by importing information from a
comma-separated value (.csv) file. This would be the least amount of administrative effort in this case.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 5: Install and administer Active
Directory, Objective 5.2: Create and Manage Active Directory Users and Computers, p. 269
QUESTION 129
server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is
You need to configure VM4 to track the CPU, memory, and network usage.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
NUMA topology
Resource control
Resource metering
The VLAN ID
The startup order
Port mirroring
Correct Answer: C
Section: (none)
Explanation
Explanation:
Metrics collected for each virtual machine using resource metering:
Average CPU usage, measured in megahertz over a period of time.
Average physical memory usage, measured in megabytes.
Minimum memory usage (lowest amount of physical memory). Maximum memory usage (highest amount of
physical memory). Maximum amount of disk space allocated to a virtual machine. Total incoming network
traffic, measured in megabytes, for a virtual network adapter.

Total outgoing network traffic, measured in megabytes, for a virtual network adapter
References:
http://blogs.technet.com/b/meamcs/archive/2012/05/28/hyper-v-resource-metering-in-windowsserver-2012server-8-beta.aspx
QUESTION 130
You need to enable access-based enumeration for a file share on Server1.
A.
B.
C.
D.
File Server Resource Manager (FSRM)

Share and Storage Management
Server Manager
File Explorer
Correct Answer: C
Section: (none)
Explanation
Explanation:
Access-based enumeration displays only the files and folders that a user has permissions to access. Accessbased enumeration can be enabled by using Share and Storage Management.
References:
http://technet.microsoft.com/en-us/library/dd772681(v=WS.10).aspx
QUESTION 131
Your network contains a file server named Server1 that runs Windows Server 2012 R2.All client computers run
Windows 8.
You need to ensure that when users are connected to the network, they always use local offline files that are
cached from Server1.
Which Group Policy setting should you configure?
A.
B.
C.
D.
Configure Slow link speed.

Turn on economical application of administratively assigned Offline Files.
Configure slow-link mode.
Enable file synchronization on costed networks.
Correct Answer: C
Section: (none)
Explanation
Explanation:
Offline Files is used to provide faster access to cached files and redirected folders.
References:
http://technet.microsoft.com/en-us/library/hh968298.aspx http://technet.microsoft.com/en-us/library/
cc957631.aspx http://technet.microsoft.com/en-us/library/jj127408.aspx
QUESTION 132
Server1. The domain contains a standalone server named Server2 that is located in a perimeter network. Both
servers run Windows Server 2012 R2.
You need to manage Server2 remotely from Server1.
What should you do?
A.
B.
C.
D.
From
From
From
From
Server1, run the Enable-PsRemotingcmdlet.

Server2, run the winrm command.
Server2/ run the Enable-PsRemotingcmdlet.
Server1, run the winrm command.
Correct Answer: D
Section: (none)
Explanation
QUESTION 133
You have a server named Corel that has a Server Core Installation of Windows Server 2012 R2.
Corel has the Hyper-V server role installed. Corel has two network adapters from different third- party hardware
vendors.
You need to configure network traffic failover to prevent connectivity loss if a network adapter fails.
What should you use?
A.
B.
C.
D.
New-NetSwitchTeam
Install-Feature
Add-NetSwitchTeamMember
Netsh.exe
Correct Answer: A
Section: (none)
Explanation
QUESTION 134
Your network contains a server named Server1 and 10 Web servers. All servers run Windows Server 2012 R2.
You create a Windows PowerShell Desired State Configuration (DSC) to push the settings from Server1 to all
of the Web servers.
On Server1, you modify the file set for the Web servers.
You need to ensure that all of the Web servers have the latest configurations.
Which cmdlet should you run on Server1?
A. Get-DcsConfiguration
B. Restore-DcsConfiguration
C. Set-DcsLocalConfigurationManager
D. Start-DcsConfiguration
Correct Answer: D
Section: (none)
Explanation
QUESTION 135
You have a server named Server1 that runs Windows Server 2012 R2.You add a 4-TB disk named Disk 5 to
Server1.
You need to ensure that you can create a 3-TB volume on Disk 5.
What should you do?
A.
B.
C.
D.
Create a storage pool.

Convert the disk to a GPT disk.
Create a VHD, and then attach the VHD.
Correct Answer: B
Section: (none)
Explanation
The exhibit shows Disk1 to be a basic disk. The disk must be GPT since GPT disks allows for partitioning.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 8: File Services and Storage,
Lesson 2: Provisioning and managing shared storage, p. 379-384 http://msdn.microsoft.com/en-us/library/
windows/hardware/gg463525.aspx
QUESTION 136
Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. The domain contains
a virtual machine named VM1.
A developer wants to attach a debugger to VM1.
You need to ensure that the developer can connect to VM1 by using a named pipe.
Which virtual machine setting should you configure?
A.
B.
C.
D.
BIOS
Network Adapter
COM 1
Processor
Correct Answer: C
Section: (none)
Explanation
Explanation:
Named pipes can be used to connect to a virtual machine by configuring COM 1.
References:
http://support.microsoft.com/kb/819036
QUESTION 137
You have a server that runs a Server Core installation of Windows Server 2012 R2.
You need to change the DNS server used by IPv6.
What should you do?
A.
B.
C.
D.
From Sconfig.configure the Network Settings.

Run the sc.exe command and specify the config parameter.
From Windows PowerShell, run the Set-NetIpv6Protocol cmdlet.
From Windows PowerShell, run the Set-DnsClientServerAddresscmdlet.
Correct Answer: D
Section: (none)
Explanation
Explanation:
The Set-DnsClientServerAddress cmdlet sets one or more IP addresses for DNS servers associated with an
interface. This cmdlet statically adds DNS server addresses to the interface. If this cmdlet is used to add DNS
servers to the interface, then the DNS servers will override any DHCP configuration for that interface.
PS C:\> Set-DnsClientServerAddress -InterfaceIndex 12 -ServerAddresses "10.0.0.1","10.0.0.2")
References:
http://technet.microsoft.com/en-us/library/jj592692.aspx http://technet.microsoft.com/en-us/library/
jj590768.aspx
QUESTION 138
Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown
in the following table.
Server3 is configured to obtain an IP address automatically.

You need to prevent Server3 from receiving an IP address from Server1.
What should you create on Server1?
A.
B.
C.
D.
An exclusion
A scope option
A filter
A reservation
Correct Answer: C
Section: (none)
Explanation
Explanation:
Filter to exclude MAC address of Server3.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 5.3 Create and manage
Active Directory groups and Organization units, Chapter 3: Configure Hyper-V, p. http://technet.microsoft.com/
en-us/magazine/ff521761.aspx http://technet.microsoft.com/en-us/library/cc726954(v=ws.10).aspx
QUESTION 139
You have a Hyper-V host named Hyperv1 that runs Windows Server 2012 R2.Hyperv1 hosts a virtual machine
named Server1.Server1 uses a disk named Server1.vhdx that is stored locally on Hyperv1.
You stop Server1, and then you move Server1.vhdx to an iSCSI target that is located on another server.
You need to configure Server1 to meet the following requirements:
Ensure that Server1 can start by using Server1.vhdx.
Prevent Server1.vhdx from consuming more than 500 IOPS on the iSCSI target.
Which two objects should you configure?
To answer, select the appropriate two objects in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 140
A printer named Printer1 is configured as shown in the exhibit.(Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct
selection is worth one point.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
* The printer is paused.

* Jobs can always be permitted (even if the printer is paused, or printer not started).
Note:
StartTime
Date and time that a printer can start to print a job--if the printer is limited to print at specific times. This value is
expressed as the time elapsed since 12:00 AM GMT (Greenwich Mean Time).
QUESTION 141
Your network contains an Active Directory domain named contoso.com. The domain contains a print server
named Server1 that runs Windows Server 2012 R2.
You share several printers on Server1.
You need to ensure that you can view the printer objects associated to Server1 in Active Directory Users and
Computers.
Which option should you select?
To answer, select the appropriate option in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
You can view printer objects in Active Directory by clicking Users, Groups, and Computers as containers from
the View menu in the Active Directory Users and Computers snap-in. By default, printer objects are created
under the machine object in which they are shared. After you turn on the Users, Groups, and Computers as
containers option, you can see printers by expanding the printer's host computer.
References:
QUESTION 142
You have a shared folder named Share1. The folder permissions of Share1 are configured as shown in the
Folder Permissions exhibit.(Click the Exhibit button.)
The Share permissions of Share1 are configured as shown in the Share Permissions exhibit.
You have a group named Group1. The members of Group1 are shown in the Group1 exhibit.
Select Yes if the statement can be shown to be true based on the available information; otherwise select No.
Each correct selection is worth one point.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
Explanation:
NTFS permissions control access to the files and folders stored on disk volumes formatted with the NTFS file
system. Share permissions control access to folders over a network.
To access a file over a network, a user must have appropriate share permissions (and appropriate NTFS
permissions if the shared folder is on an NTFS volume).Granting a user Full
Control NTFS permission on a folder enables that user to take ownership of the folder unless the user is
restricted in some other way.User1 was not granted Full Control permission.
The Administrators have Full Control permission. I assume that User2 is an administrator since the Group1
exhibit shows only User1 as a member.
References:
http://technet.microsoft.com/en-us/library/cc754178.aspx Exam Ref 70-410: Installing and configuring Windows
Server 2012 R2, Chapter 2: Configure server roles and features,
Objective 2.1: Configure file and share access, p.75-80
QUESTION 143
You have a print server named Server1 that runs Windows Server 2012 R2.
On Server1, you create and share a printer named Printer1.

The Advanced settings of Printer1 are shown in the Advanced exhibit.(Click the Exhibit button.)
The Security settings of Printer1 are shown in the Security exhibit. (Click the Exhibit button.)
The Members settings of a group named Group1 are shown in the Group1 exhibit.(Click the Exhibit button.)
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 144
Computer accounts for the marketing department are in an organizational unit (OU) named Departments
\Marketing\Computers. User accounts for the marketing department are in an OU named Departments
\Marketing\Users.
Marketing users can only log on to the client computers in the Departments\Marketing\Computers OU.
You need to apply an application control policy to all of the marketing users.
Which Group Policy Object (GPO) should you configure?
To answer, select the appropriate GPO in the answer area.

Hot Area:
Correct Answer:
Section: (none)
Explanation
References:
http://technet.microsoft.com/en-us/library/cc781458(v=WS.10).aspx http://technet.microsoft.com/en-us/library/
hh967461.aspx http://technet.microsoft.com/en-us/library/ee461050.aspx http://technet.microsoft.com/en-us/
library/ee461044.aspx
QUESTION 145
The domain contains an organizational unit (OU) named OU1 as shown in the OU1 exhibit.
The membership of Group1 is shown in the Group1 exhibit. (Click the Exhibit button.)
You configure GPO1 to prohibit access to Control Panel. GPO1 is linked to OU1 as shown in the GPO1 exhibit.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
Since user4 is not in organizational unit, the filtering the GPO does not apply to him.
References:
QUESTION 146
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows
Server 2012 R2.All client computers run Windows 7. The computer accounts for all of the client computers are
located in an organizational unit (OU) named OU1.
An administrator links a Group Policy object (GPO) to OU1. The GPO contains several application control
policies.
You discover that the application control policies are not enforced on the client computers.
You need to modify the GPO to ensure that the application control policies are enforced on the client
computers.
What should you configure in the GPO?
To answer, select the appropriate service in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
Before you can enforce AppLocker policies, you must start the Application Identity service by using the Services
snap-in console.
Membership in the local Administrators group, or equivalent, is the minimum required to complete this
procedure.
To start the Application Identity service
1. Click Start, click Administrative Tools, and then click Services.
2. In the Services snap-in console, double-click Application Identity.
3. In the Application Identity Properties dialog box, click Automatic in the Startup type list, click Start, and then
click OK.
References:
http://technet.microsoft.com/en-us/library/dd759130.aspx
QUESTION 147
Your network contains an Active Directory domain named contoso.com. The domain contains a single location
named Site1. The domain contains a server named Server1 that has the DHCP Server server role installed.
All client computers receive their IPv4 configurations dynamically.
The domain will expand to include a second location named Site2. A server named Server2 will be deployed to
Site2. Site1 and Site2 will connect to each other by using a WAN link.
You need to ensure that the clients in both sites receive their IPv4 configurations from Server1.
In the table below, identify which actions must be performed on each server. Make only one selection in each
row. Each correct selection is worth one point.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
References:
http://technet.microsoft.com/library/hh831416
http://technet.microsoft.com/en-us/library/dd469766%28v=WS.10%29.aspx Exam Ref: 70-410: Installing and
Configuring Windows Server 2012 R2, Chapter4: Deploying and configuring core network services, Objective
4.1: Configure IPv4 and IPv6 addressing, p.192, 196
QUESTION 148
You are configuring a multi-subnet IPv6 network for a regional office.
The corporate network administrator allocates the 2001:0db8:1234:0800: :/54 address space for your use.
You need to identify network IDs of the first and last subnets that you will be able to create at the office.
Which network IDs should you identify?
To answer, drag the appropriate network IDs to the correct subnets. Each network ID may be used once, more
than once, or not at all. You may need to drag the split bar between panes
or scroll to view content.
Select and Place:
Correct Answer:
Section: (none)
Explanation
QUESTION 149
You plan to deploy a DHCP server that will support four subnets. The subnets will be configured as shown in
the following table.
You need to identify which network ID you should use for each subnet.
To answer, drag the appropriate network ID to the each subnet in the answer area.
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation
References:
QUESTION 150
You have a server named Server1. Server1 runs Windows Server 2012 R2.
Server1 has two network adapters. Each network adapter must be configured as shown in the following table.
You need to configure the correct IPv6 address prefix for each network adapter.
Which prefix should you select for each network adapter?
To answer, drag the appropriate IPv6 prefix to the correct network adapter in the answer area. Each prefix may
be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view
content.
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation:
An IPv6 multicast address always begins with 11111111 or FF and includes additional structure that identifies
the scope of the address and the multicast group to which the interface belongs. IPv6 multicast addresses,
therefore, are always of the form FF00::/8.
References:
http://www.iana.org/assignments/ipv6-address-space/ipv6-address-space.xml
QUESTION 151
named Server1 and Server2. Server1 and Server2 run a Server with a GUI installation of Windows Server 2012
R2.
You remove the Graphical Management Tools and Infrastructure feature on Server2.
You need to restart Server2.
What should you do? (To answer, drag the appropriate tools to the correct statements. Each tool may be used
once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation:
When you uninstall "Server-GUI-Shell" you are left with a "Minimal Server Interface" server. So, File Explorer
and IE10 are unavailable, but MMC and Server Manager works and MMC and Server Manager will allow you to
restart server2 either locally or remotely from Server1.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring
Servers, p. 19-22
QUESTION 152
You need to switch Server1 to a Server Core installation of Windows Server 2012 R2.
What command should you run?
To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 153
You have a Hyper-V host named Server1 that runs Windows Server 2008 R2. All of the virtual machines on
Server1 use VHDs.
You install the Hyper-V server role on a server named Server2 that runs Windows Server 2012 R2. Server2 has
the same hardware configurations as Server1.
You plan to migrate the Hyper-V host from Server1 to Server2 by using the Windows Server Migration Tools.
In the table below, identify what can be migrated by using the Windows Server Migration Tools. Make only one
selection in each row. Each correct selection is worth one point.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
* The following configurations and settings can be migrated automatically include:

/ Most virtual machine configurations. Virtual machines and their data are moved as part of the migration, but
some configurations require manual intervention / Hyper-V settings. These include the system-wide settings
and the authorization store.
References:
http://technet.microsoft.com/en-us/library/ee849855%28v=WS.10%29.aspx
QUESTION 154
You need to create a new volume on Server1. The new volume must have the following configurations:
Be stored on a new virtual hard disk
Be assigned the drive letter G
Have the NTFS file system
In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them
in the correct order.
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation:
Box 1: create vdisk
Box 2: attach vdisk
Box 3: create partition
Box 4: assign
Box 5: format
Note: Example:
create vdisk file="C:\vdisks\disk1.vhd" maximum=16000
attach vdisk
create partition primary
assign letter=g
format
References:
http://technet.microsoft.com/en-us/library/gg252576.aspx
QUESTION 155
Your network contains three servers. The servers are configured as shown in the following tablE.
Your company plans to standardize all of the servers on Windows Server 2012 R2.
You need to recommend an upgrade path for each server.
The solution must meet the following requirements:
Upgrade the existing operating system whenever possible.
Minimize hardware purchases.
Which upgrade path should you recommend for each server?
To answer, drag the appropriate upgrade path to each server in the answer area.Each upgrade path may be
used once, more than once, or not at all.
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation:
Upgrade paths for Windows Server 2012 R2 are limited. In fact, it's easier to specify when you can perform an
upgrade than when you can't. If you have a 64-bit computer running Windows Server 2008 or Windows Server
2008 R2, then you can upgrade it to Windows Server 2012 R2 as long as you use the same operating system
edition.
Windows Server 2012 R2 does not support the following:
- Upgrades from Windows Server versions prior to Windows Server 2008
- Upgrades from pre-RTM editions of Windows Server 2012 R2
- Upgrades from Windows workstation operating systems
- Cross-platform upgrades, such as 32-bit Windows Server 2008 to 64-bit Windows Server 2012
- Upgrades from any Itanium edition
- Cross-language upgrades, such as from Windows Server 2008, U.S.English to Windows Server 2012, French
In any of these cases, the Windows Setup program will not permit the upgrade to proceed.
References:
http://technet.microsoft.com/en-us/library/jj134246.aspx
QUESTION 156
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 hosts 40 virtual
machines that run Windows Server 2008 R2. The virtual machines connect to a private virtual switch.
You have a file that you want to copy to all of the virtual machines.
You need to identify to which servers you can copy files by using the Copy-VmFilecmdlet.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 157
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows
Server 2012 R2.
All server are configured to enforce AppLocker policies.
You install a server named Server1.
On Server1, you install an application named appl.exe in a folder located on C:\App1.
You have two domain groups named Group1 and Group2. A user named User1 is a member of Group1 and
Group2.
You create a Group Policy object (GPO) named GPO1. You link GPO1 to contoso.com.
You create the executable rules as shown in the exhibit by using the Create Executable Rules wizard.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 158
You need to perform the following storage configuration tasks on Server1:
Bring a disk named Diskl online.
Defragment a volume named Volumel.
Remove a disk named Disk2 from a storage pool named Pooll.
Which cmdlet should you use to perform each task?
To answer, drag the appropriate cmdlets to the correct tasks. Each cmdlet may be used once, more than once,
or not at all. You may need to drag the split bar between panes or scroll to view content.
Select and Place:
Correct Answer:
Section: (none)
Explanation
QUESTION 159
You need to create a new volume on Server1. The new volume must have the following configurations:
Be stored on a new virtual hard disk
Be assigned the drive letter G
Have the NTFS file system
In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them
in the correct order.
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation:
Box 1: create vdisk
Box 2: attach vdisk
Box 3: create partition
Box 4: assign
Box 5: format
Note: Example:
create vdisk file="C:\vdisks\disk1.vhd" maximum=16000
attach vdisk
create partition primary
assign letter=g
format
References:
http://technet.microsoft.com/en-us/library/gg252576.aspx
QUESTION 160
You have a DHCP server named Server1 that runs Windows Server 2012 R2.
On Server1, you run the commands as shown in the exhibit. (Click the Exhibit button.)
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 161
R2.
You need to add a user named User1 to a group named ServerAdmins.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 162
Your network contains an Active Directory domain named contoso.com. Domain controllers run either Windows
Server 2008 R2 or Windows Server 2012 R2. All client computers run Windows 8.
All computer accounts are located in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) that contains several AppLocker rules. You link the GPO to OU1.
You need to ensure that the AppLocker rules apply to all of the client computers.
What should you configure in the GPO?
To answer, select the appropriate service in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
Configuring the Application Identity will specify where the Group Policy will be applied.
References:
http://www.grouppolicy.biz/2012/08/how-manage-published-a-k-a-metro-apps-in-windows-8-using- grouppolicy/
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 6: Create and manage Group
Policy, Objective 6.3: Configure application restriction policies, p.341
QUESTION 163
Your network contains an Active Directory forest. The forest contains a single domain named contoso.com.
AppLocker policies are enforced on all member servers.
You view the AppLocker policy applied to the member servers as shown in the exhibit. (Click the Exhibit
button.)
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 164
Your network contains an Active Directory domain named adatum.com.
You create an account for a temporary employee named User1.
You need to ensure that User1 can log on to the domain only between 08:00 and 18:00 from a client computer
named Computer1.
From which tab should you perform the configuration?
To answer, select the appropriate tab in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
The User account properties contains the Logon Hours settings that you can use to change the hours that this
selected object can log on to the domain. By default, domain logon is allowed 24 hours a day, 7 days a week.
Note that this control does not affect the user's ability to log on locally to a computer using a local computer
account instead of a domain account.
References:
http://technet.microsoft.com/en-us/library/dd145547
QUESTION 165
Your company has a main office and a sales office. The main office has 2,000 users. The sales office has 20
users. All client computers in the sales office run Windows 8.
The sales office contains a print server named App1 that runs Windows Server 2012 R2. App1 has a shared
printer named Printer1. Printer1 connects to a network-attached print device.
You plan to connect all of the users in the sales office to Printer1 on App1.
You need to ensure that if App1 fails, the users can continue to print to Printer1.
What should you configure on App1?To answer, select the appropriate option in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
Direct printer will bypass the need to print via the print server.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 2.3 Configure Print and
Document services, Chapter 2: Configure Server roles and Features, p. 104,
QUESTION 166
You deploy a Server with a GUI installation of Windows Server 2012 R2 Datacenter.
From Windows PowerShell, you run the following command: Remove-WindowsFeature Server- Gui-Shell.
In the table below, identify which tools are available on Server1 and which tools are unavailable on Server1.
Make only one selection in each row. Each correct selection is worth one point.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
When you uninstall "Server-GUI-Shell" you are left with a "Minimal Server Interface" server. So, File Explorer
and IE10 are unavailable, but MMC and Server Manager works.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p. 44
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring
Servers, p. 19-22
QUESTION 167
Server that runs Windows Server 2012 R2.
You perform a Server Core Installation of Windows Server 2012 R2 on a new server.
You need to ensure that you can add the new server to Server Manager on Server1.
What should you configure on the new server? To answer, select the appropriate setting in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
You will require a network connection to the server to manage it from a different server, therefor you need to
configure the network settings to enable Remote Management.
References:
http://technet.microsoft.com/en-us/library/jj647766.aspx
QUESTION 168
Your network contains an Active Directory domain named contoso.com. The network contains a DHCP server
named DHCP1.
You add a new network segment to the network.
On the new network segment, you deploy a new server named Server1 that runs Windows Server 2012 R2.
You need to configure Server1 as a DHCP Relay Agent.
To answer, select the appropriate role in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
In Windows Server 2012 R2 the DirectAccess feature and the RRAS role service were combined into a new
unified server role. This new Remote Access server role allows for centralized administration, configuration,
and monitoring of both DirectAccess and VPN-based remote access services. Additionally, Windows Server
2012 R2 DirectAccess provided multiple updates and improvements to address deployment blockers and
provide simplified management.
References:
QUESTION 169
Server1. Server1 runs a Server Core installation of Windows Server 2012 R2.
You install the DNS Server server role on Server1.
You need to perform the following configurations on Server1:
Create an Active Directory-integrated zone named adatum.com.
Send unresolved DNS client queries for other domain suffixes to the DNS server of your company's Internet
Service Provider (ISP).
Which Windows PowerShell cmdlets should you use?
To answer, drag the appropriate cmdlet to the correct configuration in the answer area. Each cmdlet may be
used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view
content.
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation:
Add-DnsServerDirectoryPartition: Creates a DNS application directory partition. Add-DnsServerPrimaryZone:
Adds a primary zone to a DNS server. Set-DNSServer Overwrites a DNS server configuration. SETDNSServerForwarder Changes forwarder settings on a DNS server Set-DNSServerDSSetting Modifies DNS
Active Directory settings.
Set-DNSServerSetting Modifies DNS server settings.
References:
http://technet.microsoft.com/en-us/library/jj649942(v=wps.620).aspx http://technet.microsoft.com/en-us/library/
jj649876(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649845(v=wps.620).aspx http://
technet.microsoft.com/en-us/library/jj649887(v=wps.620).aspx http://technet.microsoft.com/en-us/library/
jj649874.aspx http://technet.microsoft.com/en-us/library/jj649909.aspx
QUESTION 170
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual
machines.
You need to create a script to list all of the virtual machines that have checkpoints and support Secure Boot.
What should you do? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 171
The settings for a virtual machine named VM2 are configured as shown in the VM2 exhibit.
The settings for Diskl.vhdx are configured as shown in the Diskl.vhdx exhibit. (Click the Exhibit button.)
The settings for Disk2.vhdx are configured as shown in the Disk2.vhdx exhibit. (Click the Exhibit button.)
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
If you want to compact a differencing virtual hard disk or an undo disk, you must merge the changes to the
parent disk and then compact the parent disk, if it is a dynamically expanding virtual hard disk.
You can compact a dynamically expanding virtual hard disk. You cannot compact any other type of virtual hard
disk. However, you can convert a fixed-size virtual hard disk to a dynamically expanding virtual hard disk and
then compact the disk. If you want to compact a differencing virtual hard disk or an undo disk, you must merge
the changes to the parent disk and then compact the parent disk, if it is a dynamically expanding virtual hard
disk
References:
QUESTION 172
Your network contains an Active Directory domain named contoso.com. The network contains a DHCP server
named DHCP1.
You add a new network segment to the network.
On the new network segment, you deploy a new server named Server1 that runs Windows Server 2012 R2.
You need to configure Server1 as a DHCP Relay Agent.
To answer, select the appropriate role in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
In Windows Server 2012 R2 the DirectAccess feature and the RRAS role service were combined into a new
unified server role. This new Remote Access server role allows for centralized administration, configuration,
and monitoring of both DirectAccess and VPN-based remote access services. Additionally, Windows Server
2012 R2 DirectAccess provided multiple updates and improvements to address deployment blockers and
provide simplified management.
References:
QUESTION 173
You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the Windows Deployment
Services (WDS) server role installed.
You install the DHCP Server server role on Server1.
You need to ensure that Server1 can respond to DHCP clients and WDS clients.
What should you configure for the DHCP service and the WDS service?
To answer, configure the appropriate options in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
QUESTION 174
You add a new internal SAS disk to Server1.
You need to ensure that the new disk is available to store files.
Which three cmdlets should you run in sequence?

To answer, move the appropriate three cmdlets from the list of cmdlets to the answer area and arrange them in
the correct order.
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation:
Box 1: Initialize-Disk
Box 2: New-Partition
Box 3: Format Volume
Note:
* The following script accomplishes these four tasks (listed below):
Initialize-Disk -PartitionStyle MBR -PassThru |
New-Partition -AssignDriveLetter -UseMaximumSize |
Format-Volume -FileSystem NTFS -NewFileSystemLabel "disk2" -Confirm:$false
* Use PowerShell to Initialize Raw Disks and to Partition and Format Volumes
With Windows PowerShell 3.0 in Windows 8 or Windows Server 2012, I can perform all of these operations via
Windows PowerShell functions from the Storage module. The process is the same as I would do via the Disk
Management tool. The steps are:
Get the disk that has a raw partition style.
Initialize the disk.
Partition the disk.
Format the volume.
* Serial Attached SCSI (SAS) is a point-to-point serial protocol that moves data to and from computer storage
devices such as hard drives and tape drives. SAS replaces the older Parallel SCSI (Small Computer System
Interface, pronounced "scuzzy"), bus technology that first appeared in the mid-1980s. SAS, like its predecessor,
uses the standard SCSI command set. SAS offers backward compatibility with SATA, versions 2 and later. This
allows for SATA drives to be connected to SAS backplanes. The reverse, connecting SAS drives to SATA
backplanes, is not possible
QUESTION 175
Your network contains an Active Directory domain named corp.contoso.com. The domain contains a domain
controller named DC1.
When you run ping dc1.corp.contoso.com, you receive the result as shown in the exhibit. (Click the Exhibit
button.)
You need to ensure that DC1 can respond to the Ping command.
Which rule should you modify?
To answer, select the appropriate rule in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
ICMP should have been enabled when ADDS was installed
References:
http://social.technet.microsoft.com/wiki/contents/articles/16566.windows-active-directory-role- forwindowsservers.aspx
QUESTION 176
R2. All client computers run Windows 8.
The domain contains a security group named Group1.
You have a Group Policy object (GPO) named GP01. GPO1 is linked to the domain. You need to ensure that
only the members of Group1 can run the applications shown in the following table.
Which type of application control policy should you implement for each application? To answer, drag the
appropriate rule types to the correct applications. Each rule type may be used once, more than once, or not at
all. You may need to drag the split bar between panes or scroll to view content.
Select and Place:
Correct Answer:
Section: (none)
Explanation
QUESTION 177
You need to identify whether the Company attribute replicates to the global catalog.
Which part of the Active Directory partition should you view?
To answer, select the appropriate Active Directory object in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
An Active Directory Lightweight Directory Services (AD LDS) schema defines, using object classes and
attributes, the types of objects and data that can be created and stored in an AD LDS directory. The schema
can be extended with new classes and attributes, either by administrators or by the applications themselves. In
addition, unneeded schema classes and attributes can be deactivated.
References:
http://technet.microsoft.com/en-us/library/cc771975.aspx http://technet.microsoft.com/en-us/library/
cc731547.aspx
QUESTION 178
named Hyperv1 and a domain controller named DC1. Hyperv1 has the Hyper-V server role installed. DC1 is a
virtual machine on Hyperv1.
Users report that the time on their client computer is incorrect.
You log on to DC1 and verify that the time services are configured correctly.
You need to prevent time conflicts between the time provided by DC1 and other potential time sources.
To answer, select the appropriate object in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
Hyper-V integration services are updated with a new service that allows Hyper-V administrators to copy files to
the virtual machine while the virtual machine is running without using a network connection.
In previous versions of Hyper-V, a Hyper-V administrator may have needed to shut down a virtual machine to
copy files to it. A new Hyper-V integration service has been added that allows the Hyper-V administrator to copy
files to a running virtual machine without using a network connection. This will eliminate time conflicts.
References:
http://technet.microsoft.com/en-us/library/dn282278.aspx
QUESTION 179
You have two servers that run Windows Server 2012 R2. The servers are configured as shown in the following
table.
You need to ensure that Server2 can be managed by using Server Manager from Server1.
In the table below, identify which actions must be performed on Server1 and Server2. Make only one selection
in each row. Each correct selection is worth one point.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
On the computer that is running Server Manager, add the workgroup server name to the TrustedHosts list.
References:
QUESTION 180
You have a file server named Server1 that runs Windows Server 2012 R2. Server1 contains a folder named
Folder1.
A user named User1 is a member of Group1 and Group2. A user named User2 is a member of Group2 and
Group3.
You need to identify which actions the users can perform when they access the files in Share1.
To answer, select the appropriate actions for each user in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
User 1:
- Read the files
- Edit the contents of the files
- Delete files created by other users
- Modify the permissions on the files
- Execute executable files
User 2:
- Read the files
- Edit the contents of the files
Explanation:
Share permissions apply to users who connect to a shared folder over the network. Group membership of
User1 means that he has Full control permission and User2 only has Read and change permission.
References:
Exam Ref 70-410: Installing and configuring Windows Server 2012 R2, Chapter 2: Configure server roles and
features, Objective 2.1: Configure file and share access, p. 75-80
QUESTION 181
Your network contains an Active Directory domain named contoso.com. The domain contains servers named
Server1 and Server2 that run Windows Server 2012 R2.
You create a windows PowerShell script named Scriptl.psl that contains the following configuration:
You need to apply the configuration to Server1. The solution must ensure that the configuration on Server1 can
be updated by modifying a MOF file on Server2.
Which actions should you perform on each server?
To answer, select the appropriate server on which to perform each action in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 182
Your network contains an Active Directory domain named contoso.com. The domain contains 25 servers. All
servers run Windows Server 2012 R2.
You need to create a Windows Firewall rule to prevent administrators from using Internet Explorer to access
the Internet while they are logged on interactively to the servers. The solution must not prevent administrators
from accessing websites on the internal network.
How should you configure the rule?
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
QUESTION 183
Your network contains an Active Directory domain named contoso.com. The domain contains a print server
named Print1 that runs Windows Server 2012 R2.
Print1 has 50 shared printers. Each printer is listed in Active Directory.
From Active Directory Users and Computers, you browse to Print1 and you discover that the 50 printers are not
visible.
You need to ensure that you can view the printer objects in Active Directory Users and Computers.
Which option should you select? To answer, select the appropriate option in the answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
In the Active Directory Users and Computers snap-in you should navigate to the Users, Contacts, Groups, and
Computers as containers tab if you want to view printer objects that are shared.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 5: Active Directory
Administration, Lesson 1: Administering Active Directory objects using ADAC, p.
QUESTION 184
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role
installed.
You need to implement NIC teaming on Server1.

Which two network connections should you include on the NIC team? (To answer, select the two appropriate
network connections in the answer area.)
Hot Area:
Correct Answer:
Section: (none)
Explanation
Explanation:
NIC Teaming requires the presence of a single Ethernet network adapter, which can be used for separating
traffic that is using VLANs. All modes that provide fault protection through failover require at least two Ethernet
network adapters. NIC1 is already enabled, thus you should include NIC2 and NIC3.
References:
QUESTION 185
You are configuring a test network. The test network contains a subnet named LAN1. LAN1 uses the network
ID of 10.10.1.0/27.
You plan to add a new subnet named LAN2 to the test network.
LAN1 and LAN2 will be connected by a router.
You need to identify a valid network ID for LAN2 that meets the following requirements:
Ensures that hosts on LAN2 can communicate with hosts on LAN1.
Supports at least 100 IPv4 hosts.
Uses only private IP addresses.
Which network ID should you use?
To answer, drag the appropriate network ID and subnet mask to the correct location in the answer area.
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation:
The Subnet Mask specifies which bits of the IP address identify the host system and which bits identify the
network where the host system resides.
References:
QUESTION 186
You have a Hyper-V host named Host1.Host1 contains two virtual machines named VM1 and VM2.VM1 is
configured as a print server.VM1 runs Windows Server 2008 R2.VM2 is configured as a file server.VM2 runs

You need to migrate all of the printers on VM1 to VM2.
Which actions should you perform on the virtual machines? To answer, drag the appropriate action to the
correct servers in the answer area. Each action may be used once, more than once, or not at all. You may need
to drag the split bar between panes or scroll to view content.
Select and Place:
Correct Answer:
Section: (none)
Explanation
Note:
On VM1 we export the printers. On VM2 we first install the Print and Document Services role, and then import
the printers.
You must install the Print and Document Services role on the destination server before you begin the migration
process
Reference: Migrate Print and Document Services to Windows Server 2012
QUESTION 187
You have a server that runs Windows Server 2012 R2.
You need to create a volume that will remain online if two disks in the volume fail. The solution must minimize
the number of disks used to create the volume.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the
list of actions to the answer area and arrange them in the correct order.)
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation:
Box 1: Add five physical disks.
Box 2: Create a virtual disk.
Box 3: Create a storage space by using the default disk allocation.
Windows Server 2012 R2 R2 introduces a parallelized repair process, where the remaining healthy disks move
around and take responsibility for the slabs of data that were stored on the failed disk. It is extremely quick
because all disks in the storage space are involved. The recommendation is that instead of using hot spares,
you instead use the disks that are spare but active capacity in the storage space, that can be availed of by the
parallelized repair process. This will both offer more IOPS to normal production storage activity and leave your
business less vulnerable during a repair process
QUESTION 188
You have a server named Server 1.Server1 runs Windows Server 2012 R2.
Server1 has two network adapters and is located in a perimeter network. You need to install a DHCP Relay
Agent on Server1.
Which node should you use to add the DHCP Relay Agent? To answer, select the appropriate node in the
answer area.
Hot Area:
Correct Answer:
Section: (none)
Explanation
Expand the IPv4 node. Then, right-click the General node and, in the shortcut menu, select New Routing
Protocol. The New Routing Protocol dialog box appears.
Select DHCP Relay Agent and click OK. A DHCP Relay Agent node appears, subordinate to the IPv4 node.
Right-click the DHCP Relay Agent node and, on the shortcut menu, select New Interface. The New Interface
For DHCP Relay Agent dialog box appears. THEN you can add a relay agent.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 4: Deploying and configuring
core network services, p. 220

Microsoft - Actualtests.70 410.vv2014!10!13.by - kathLEEN

Uploaded by

Copyright:

Available Formats

Microsoft - Actualtests.70 410.vv2014!10!13.by - kathLEEN

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Microsoft - Actualtests.70 410.vv2014!10!13.by - kathLEEN

Uploaded by

Copyright:

Available Formats

Microsoft.Actualtests.70-410.v2014-10-13.by.KATHLEEN.

Exam Code: 70-410

Dynamically expanding VHDX

Get-VM "VM6" | Set-VMNetworkAdapter-IovWeight 1

Run the Set-VmNetworkAdaptercmdlet.

You have a virtual machine named VM1.

Create a Virtual Fibre Channel SAN.

C. Shut down VM1.

The properties on the new volume

Run the Enable-NetFirewallRulecmdlet.

Server Manager, modify the Remote Management setting.

virtual Machine Chimney

FromComputer1, run gpupdate /force.

You link GP1 to the AllComputers OU.

The Security settings of GP1

Run netshadvfirewall set global statefulftp enable.

An outbound rule to allow a connection to TCP port 3080

Create a reverse lookup zone.

Sign the contoso.com zone by using DNSSEC.

On Server1, create a reverse lookup zone.

the DHCP console, reconcile Scope1.

Open the Srv.sys file.

Run Get-ADComputer and specify the SearchScope parameter.

All domain controllers are DNS servers.

Convert Group1 to a universal security group.

A Restricted Groups setting in a Group Policy linked to ServersOU

Enable the global catalog server.

The placement of the global catalog server

You need to use DSC to configure Server1 as defined in the configuration.

the Services console, configure the General settings.

You install Windows Server 2012 R2 on a new server named DC3.

You install a network monitoring application on VM2.

On Host1, configure a new virtual switch.

Right-click VM1, and then click Export...

a command prompt, run netsh set global autotuninglevel = highlyrestrictedcongestionprovider=none.

From Server Manager, change the load balancing mode of Team1.

Create a storage pool.

File and Storage Services, extend Disk1.

On Server1, run the Export-DhcpServercmdlet.

Correct Answer: ABE

Add two printers and configure printer pooling.

winrm get server2

Install Remote Server Administration Tools on Server1.

the Microsoft Management Console on Server1, add a snap-in.

On Server1, modify the Group Policy filtering options of GPO1.

The 006 DNS Servers option to Subnet_Mtl

On DC2, create a forwarder.

Naming Authority Pointer (NAPTR) DNS resource records (RR)

Computer1 is configured to obtain an IP address automatically.

Disable the Allow filters.

the properties of User1, select Store password using reversible encryption.

Install the DNS Server role.

a command prompt, run the redircmp.exe command.

Group1 is located in an organizational unit (OU) named OU1.

D. Modify the Managed By settings on OU1.

D. Modify the Enforcement Properties.

Windows PowerShell, run the Move-ADObjectcmdlet.

Run the Delegation of Control Wizard on OU1.

D. On DC2, install the Feature Administration Tools.