Application Chart

INTERNATIONAL
VEHICLE
APPLICATION
GUIDE
Copyright 2013 by ARB Corporation Limited.

All rights reserved.
All text, images, graphics and other materials herein are subject to the copyrights and other intellectual property rights of
ARB Corporation Limited.
These Materials may not be copied for commercial use or distribution, nor may these materials be modified or reposted to
other sites without the express written consent of ARB Corporation Limited.
No Liability is assumed for damages resulting in the use of the information contained herein.
ARB Air Locker Air Operated Locking Differentials and Air Locker are trademarks of ARB Corporation Limited.
Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
AIR OPERATED LOCKING DIFFERENTIALS

INTERNATIONAL
This listing covers most

known Australian and
International applications but
is not a complete list of all
possible applications globally.
For applications not
specifically referred to in this
listing, please contact ARB or
your local ARB stockist.
Model years and names may
vary greatly depending on
point of sale. Use axle shaft
spline count and / or ring &
pinion ratio to distinguish
between similar models where
possible.
VEHICLE APPLICATION CHART

OCTOBER 2014
Chevrolet / GMC / Hummer
Chrysler / Jeep
Dodge
Ford
Holden
Hyundai
Isuzu
Land Rover
Mazda
Mitsubishi
Nissan
Santana
Ssangyong
Suzuki
Toyota / Lexus
10
Volkswagen
10
Performance Applications
11
Differential Covers
11
Air Compressors
11
Applications By Part Number
12
Page 1
CHEVROLET / GMC / HUMMER
Chevrolet / GMC / Hummer
Vehicle/Model
Axle Loc'n
Year
Description
10/1500 Series, C, G, K,
P, Blazer, Jimmy,
Front
To 1980
Yukon, Suburban ,
Vans
Rear
20/2500 Series, C, G, K,
P, Cab Chassis, Pickup,
Suburban1, Rally,
Sportvan
Front
Rear
30/3500 Series,
C, K, G, P, RV,
Front
Pickup, Suburban1,
Rally, Sportvan,
2500HD
Rear
Dana M44, 3600lb
Shaft
Diameter
33.3 (1.31")
Shaft
Spline
30
1977-89
1989 on
1982-89
1982 on
To 1982
To 1980
GM 10 bolt
GM 10 bolt, 8.5" dia. RG, semi floating
Dana 44
30.5 (1.20")
33.3 (1.31")
30.5 (1.20")
34.8 (1.37")
33.3 (1.31")
33.3 (1.31")
28
30
28
33
30
30
1977-89
1982 on
1980-93
1975-77
GM 10 bolt
GM 14 bolt, 9.5" dia. RG, 4800-5700lb
Dana 60HD
30.5 (1.20")
34.8 (1.37")
30.5 (1.20")
38.1 (1.50")
28
33
28
35
To 1974
Dana 60
33.3 (1.31")
30
1973 on
1977-90
GM 14 bolt, 10.5" dia. RG full floating

Dana 60HD
39.0 (1.56")
38.1 (1.50")
30
35
1989-2010
2011 on
1988 on
1976 on
GM IFS 9.25" dia. RG

AAM 925 IFS
34.8 (1.37")
33
Dana 70HD
34.8 (1.37")
38.1 (1.50")
33
35
Dana 70U
38.1 (1.50")
35
1975-86
Dana 60HD, full floating
38.1 (1.50")
35
39.0 (1.56")
38.1 (1.50")
40.6 (1.60")
39.0 (1.56")
31.8 (1.25")
31.8 (1.25")
34.8 (1.37")
34.8 (1.37")
30.5 (1.20")
33.3 (1.31")
30
35
37
30
29
29
33
33
28
30
3,4
3500 HD
Rear
1973 on
1992 on
GM 14 bolt, 10.5" dia RG, full floating

Dana 80
Hummer H1
Front
Rear
Front
Rear
Front
Rear
1992 on
1983 on
1983 on
2003 on
2003 on
2006 on
2006 on
GM 14 bolt, 10.5" dia. RG full floating

AMC Model 20, 8.875" dia. RG
GM IFS 9.25" dia. RG
AAM 760,IFS
Hummer H2
Hummer H3, Chevrolet
Colorado,GMC Canyon
ARB Diff Cover available (RED and/or BLACK).

1
Suburban kept 10 bolt front and rear ends until 1991. Keep in mind spline change in 1989.
2
If vehicle was manufactured in 1989/90 check spline count to determine which model is needed.
3
Some 1988 and newer trucks use a unique Dana 70-3HD. Special fitment is required.
4
1999 and newer axle shafts may need .005" dia. removed for proper fit.
5
4.56 & UP ratios must use 'thick' type high offset gearset.
6
See performance section of this guide for non-standard upgrade model(s) available for this application.
7
Air Locker flange holes must be drilled or reamed to suit 9/16" bolts for Dana 80 applications.
Ratio
3.92 & UP
3.73 & DN
2.73 & UP
2.73 & UP
2.73 & UP
All
3.73 & UP
3.92 & UP
3.73 & DN
2.73 & UP
All
2.73 & UP
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
All5
4.56 & UP
4.10 & DN
All
All
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
All5
3.73 & DN
3.73 & DN
All5
2.73
2.73
All
All
All
2.73 & UP
ARB
Part No.
RD1166
RD1176
RD832
RD842
RD832
RD197
RD216
RD1166
RD1176
RD832
RD197
RD832
RD166
RD167
RD162
RD163
RD114
RD166
RD167
RD197
NA
RD197
6
RD172
RD1736
RD1726
RD1736
RD166
RD167
RD114
RD1736,7
RD1756,7
RD114
RD1874
RD1874
RD197
RD197
RD148
RD84
Page 2
Chrysler / Jeep
CHRYSLER / JEEP
Vehicle/Model
Axle Loc'n
Year
Description
Shaft
Diameter
29.5 (1.16")
Shaft
Spline
27
CJ(5, 6, 7 & 8),

YJ & TJ Wrangler,
XJ Cherokee,
XJ Wagoneer,
Front
1971 on
Dana 30
Rear
1993-2004 Dana 44A, ZJ C-clip; WJ non C-clip

1990 on
Dana 351, C-clip, XJ, YJ, ZJ, TJ, WJ
33.3 (1.31")
29.5 (1.16")
30
27
1997-00
to 1996
1997 on
Chrysler 8.25" dia. RG, C-clip

Dana 44, TJ model only
30.7 (1.21")
29.5 (1.16")
33.3 (1.31")
29
27
30
1985-89
Dana 351, non C-clip
29.5 (1.16")
27
1987-89
Dana 44, Commanche truck
33.3 (1.31")
30
1986-91
Dana 44, XJ w/ metric ton package
33.3 (1.31")
30
1976-85
31.8 (1.25")
29
1969-75,86
Dana 44-3R
33.3 (1.31")
30
1966-68
Dana 44-R
31.8 (1.25")
19
Front
2007 on
Dana 30
29.5 (1.16")
27
Rear
2007
2007 on
2007 on
TBD
33.3 (1.31")
2001 on
Dana 35
Dana 44
replacement for 32 SPL Rock-Trac e-locker
(axle upgrade required - see note 8)
Dana 30 IFS
29.5 (1.16")
TBD
30
All
All
27
2001 on
1974-93

Dana M44-1F
30.7 (1.21")
33.3 (1.31")
29
30
1971-73
Dana 30
29.5 (1.16")
27
1986-93
Dana 44
33.3 (1.31")
30
1980-86
31.8 (1.25")
29
1969-79
Dana M44-3R
33.3 (1.31")
30
1966-69
Dana M44-R
31.8 (1.25")
19
Front
1971-88
Dana M44-1F
33.3 (1.31")
30
Rear
1980-88
31.8 (1.25")
29
1970-88
Dana M44-R
33.3 (1.31")
30
1966-69
Dana M44-R
31.8 (1.25")
19
Front
1970-88
Dana M44-1F
33.3 (1.31")
30
Rear
1974-88
Dana M60-3R
33.3 (1.31")
30
1969-73
Dana M60-2R
38.1 (1.50")
35
2005 on
2005 on
2005 on
TBD
Chrysler 8.25" dia. RG, non-C-clip
Dana 44A (WK/WH: SRT8 only; XK/XH: 2WD only)
30.7 (1.21")
33.3 (1.31")
29
30
ZJ, WJ Grand Cherokee3
JK Wrangler
(not Rubicon models)
JK Wrangler Rubicon
Front
Rear
Front
KJ,KK, Jeep Liberty,

Cherokee
Full size AMC Cherokee,
Grand Wagoneer
Rear
Front
Rear
J10, Light Truck,

FC150, 170,
Honcho
J20, Medium Truck,

J30, Heavy Truck
WK/WH Grand Cherokee,

XK/XH Commander
Front
Rear
Ratio
ARB
Part No.
3.73 & UP
3.54 & DN
All
2.73-3.31
3.54 & UP
All
All
3.92 & UP
3.73 & DN
2.73-3.31
3.54 & UP
3.92 & UP
3.73 & DN
3.92 & UP
3.73 & DN
3.08 & UP
2.73 & DN
3.92 & UP
3.73 & DN
3.92 & UP
3.73 & DN
3.73 & UP
3.54 & DN
All
All
All
All
3.73 & UP
3.54 & DN
All
3.92 & UP
3.73 & DN
3.73 & UP
3.54 & DN
3.92 & UP
3.73 & DN
3.08 & UP
2.73 & DN
3.92 & UP
3.73 & DN
3.92 & UP
3.73 & DN
3.92 & UP
3.73 & DN
3.08 & UP
2.73 & DN
3.92 & UP
3.73 & DN
3.92 & UP
3.73 & DN
3.92 & UP
3.73 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
RD1003,6
RD1013
RD226
RD1035
RD1025,6
RD93
N/A4
RD1165,6
RD1175,6
RD103
RD1026
RD1166
RD1176
RD1166
RD1176
ALL
ALL
RD935,8
RD226

1
The "C" in "Dana 35C" does not represent C-clip. They are manufactured in both C-clip and non C-clip models.
Air Locker model RD102, RD103 and RD105 suits both types of axles regardless.
2
Air Locker model RD186 has a floating thrust block to suit vehicles with tapered axles.
The thrust block must not be used when swapping to full floating axles and some one-piece axle shaft conversions.
3
Quadradrive traction control vehicles require non-Quadradrive axle shaft replacements for Air Locker installation.
4
Pre-1997 8.25" axle assemblies with 27 spline axle shafts will accept newer 29 spline shafts if RD93 is fitted.
5
Newer OEM Dana 35, Dana 44 & Chrysler 8.25" ring gears may have 3/8", 7/16", or 1/2" ring gear bolts.
Air Locker flange holes must be drilled or reamed larger to suit 7/16" or 1/2" bolts.
6
7
JK Rubicon's Rock-Trac system e-locker replacement requires upgrade to 35 spline axle shafts (sold separately).
8
Does not suit Quadra-Drive ELSD equipped vehicles.
RD1862
RD187
RD1166
RD1176
NA
NA
RD1006
RD101
TBD
RD1175,6
RD1577
RD1577
RD1006
RD101
RD935
RD1166
RD1176
RD1006
RD101
RD1166
RD1176
RD1862
RD187
RD1166
RD1176
NA
NA
RD1166
RD1176
2
RD186
RD187
RD1166
RD1176
NA
NA
RD1166
RD1176
RD162
RD163
RD166
RD167
Page 3
DODGE
Dodge
Vehicle/Model
Axle Loc'n
Year
Description
100, 150, 200, 250,

A, B, D, W
Front
All
Rear
300, 350, 400,

B, C, M, W
Front
Rear
Dana 44, half ton truck
Shaft
Diameter
33.3 (1.31")
Shaft
Spline
30
1975-93
Dana 60, three quarter ton truck
33.3 (1.31")
30
1989-93
35.8 (1.41")
32
1988-95
Dana 60HD, three quarter ton truck
& 1971-82
1991-93
38.1 (1.50")
35
35.8 (1.41")
32
1988-93
Dana 70U, three quarter ton truck
38.1 (1.50")
35
1983-93
1972-82
Dana 601
Dana 60
33.3 (1.31")
35.8 (1.41")
30
32
38.1 (1.50")
35
33.3 (1.31")
30
1976-95
Dana 60HD
38.1 (1.50")
35
1971-74
Dana 70
35.8 (1.41")
32
1955 on
Dana 60
33.3 (1.31")
30
1979-93
Dana 70HD
38.1 (1.50")
35
1971-93
Dana 70
35.8 (1.41")
32
1993
Dana 80
Dana 30 (non-standard)
Dana 44
38.1 (1.50")
40.6 (1.60")
29.5 (1.16")
30.7 (1.21")
29.5 (1.16")
33.3 (1.31")
35
37
27
29
27
30
Chrysler 9.25" dia. RG

Dana 60
35.8 (1.41")
31
32
38.1 (1.50")
35
33.3 (1.31")
30
Dakota V6,
1500/2500 Van
Front
Rear
RAM 1500
Front
1997 on
1997 on
to 1996
1994-03
RAM 2500, 3500
Rear
Front
1994 on
1994-02
Rear
2003 on
1994-02
AAM 925 (9.25")

Dana 70
34.8 (1.37")
35.8 (1.41")
33
32
1994-02
Dana 80
Dana 80
AAM 1150 (11.5")
38.1 (1.50")
40.6 (1.60")
39.0 (1.56")
35
37
30
2003 on
Ratio
3.91 & UP
3.73 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
3.54
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
3.73 & DN
3.73 & DN
All
All
3.91 & UP
3.73 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
All
4.56 & UP
4.10 & DN
3.73 & DN
3.73 & DN
All

1
1988 and newer half ton petrol trucks may have either a Chrysler 9.25" or Dana 60. Check spline count.
2
Pre-1997 8.25" axle assemblies with 27 spline axle shafts will accept newer, stronger 29 spline shafts if RD93 is used.
3
4
Newer OEM Chrysler 8.25" and Dana 44 ring gears may have 3/8", 7/16" or 1/2" ring gear bolts.
Air Locker flange holes must be drilled or reamed larger to suit 7/16" or 1/2" bolts.
5
Several axle shaft variants were used. Verify spline count prior to ordering.
6
ARB
Part No.
RD1163,4
RD1173,4
RD162
RD163
RD170
RD171
RD166
RD167
RD170
RD171
3
RD172
RD1733
RD163
RD1645
RD1655
RD1665
RD1675
RD1625
RD1635
RD166
RD167
RD1703
3
RD171
RD162
RD163
RD1723
RD1733
RD1703
RD1713
RD1733,6
RD1753,6
NA
RD934
N/A2
RD1163,4
RD1173,4
NA
RD1645
RD1655
RD1665
RD1675
RD1625
RD1635
RD197
3
RD170
RD1713
RD1733,6
RD1753,6
RD139
Page 4
FORD
Ford
Vehicle/Model
Axle Loc'n
Year
Description
Maverick
(Nissan Patrol GQ)
F100/150 Pickup,
E100/150 Van (2WD),
Bronco
Front
Rear
All
All
1997 on
2010 on
1983-96
H233B
H233B
Ford 8.8" dia. RG, IFS
Ford 8.8" dia. RG, IFS (incl. Raptor)
Dana 44, C-clip
30.5 (1.20")
33.5 (1.32")
33.3 (1.31")
Shaft
Spline
31
33
28
31
30
To 1982
Dana 44
33.3 (1.31")
30
1976-86
1977-79
Ford 9" dia. RG

Dana 44
33.5 (1.32")
33.3 (1.31")
31
30
To 1979
1997 on
1983 on
1997-98
Ford 9" dia. RG, 28 spline

Ford 9.75" dia. RG, C-clip
Ford 8.8" dia. RG
Ford 8.8" dia. RG, 3750lb
1983-96
Dana 44, C-clip
30.5 (1.20")
34.8 (1.37")
33.5 (1.32")
33.5 (1.32")
30.5 (1.20")
33.3 (1.31")
28
34
31
31
28
30
To 1983
Dana 44
33.3 (1.31")
30
1980-06
1999-02
2000-05
2000 on
Dana 50,IFS w/ HD suspension option

Dana 50,live axle
Dana 50,live axle
Dana 60, full floating
33.3 (1.31")
33.3 (1.31")
33.3 (1.31")
38.1 (1.50")
30
30
30
35
1985 on
1975-84
Ford 10.25"/10.5" dia. RG,6250lb,full floating

38.1 (1.50")
33.3 (1.31")
35
30
1995-96
38.1 (1.50")
35
2002 on
35.8 (1.41")
32
1981 on
Dana 60, semi floating (C-clip)
38.1 (1.50")
35
Front
1980-04
1997-00
1986 on
Dana 50
Non-HD option
Dana 60
Rear
1985 on
2000-01
Ford 10.25" dia. RG, 6250lb, full floating

Dana 60 (dual rear wheel axle models)
33.3 (1.31")
33.3 (1.31")
38.1 (1.50")
38.1 (1.50")
38.1 (1.50")
38.1 (1.50")
30
30
35
35
35
35
1988 on
38.1 (1.50")
35
1975-85
Dana 70HD,10.5" dia. RG
38.1 (1.50")
35
1975-85
Dana 70U
38.1 (1.50")
35
1973-79
33.3 (1.31")
30
Front
1990-97
Dana 35 (V6 only)
29.5 (1.16")
27
Rear
1998 on
1990 on
Dana 35 (non-standard)
30.5 (1.20")
33.5 (1.32")
28
31
Rear
To 2006
2006-12
2012 on
To 2006
Front
Rear
Front
2006-11
2012 on
1997 on
1997 on
1997 on
All
IFS, 30 spline
IFS, 29 spline, clamshell type
4 cylinder, Dana banjo type
6 cylinder, salisbury type
Dana 44,32 spline
All models (incl. OE locker equipped)9
Ford 9.75" dia. RG
Dana 60
30.8 (1.21")
31.5 (1.24")
30.8 (1.21")
32.8 (1.29")
35.8 (1.41")
34.6 (1.36")
30.5 (1.20")
34.8 (1.37")
38.1 (1.50")
30
29
30
30
32
32
28
34
35
Dana 80
Dana 80
40.6 (1.60")
38.1 (1.50")
37
35
Front
Rear
F250 Pickup,
E250 Van (2WD)
Front3
Rear
F350 Pickup,
E350 Van (2WD)
Explorer, Ranger (US),

Aerostar (2WD)
Courier, Ranger (Thai)
Front
Expedition
F450/550 Pickup,
Super Duty Van (2WD),
E/F350 Dually
Rear
1996 on
1988 on
Shaft
Diameter
32.0 (1.26")
Ratio
All
All
All
All
3.92 & UP
3.73 & DN
3.92 & UP
3.73 & DN
All
3.92 & UP
3.73 & DN
All
All
All
All
All
3.92 & UP
3.73 & DN
3.92 & UP
3.73 & DN
All
All
All
4.56 & UP
4.10 & DN
All
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
All
All
All
4.56 & UP
All
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.57 & UP
4.10 & DN
4.56 & UP
4.10 & DN
2.73-3.31
3.54 & UP
All
All
All
All
All
All
All
All
All
All
All
4.56 & UP
4.10 & DN
All
All
ARB
Part No.
6
RD136
RD135
RD82
RD81
RD1161,4
RD1171,4
RD1164
RD1174
RD1194
RD1164
RD1174
NA
RD150
RD81
RD81
RD82
RD1161,4
RD1171,4
RD1164
RD1174
RD158
RD158
RD158
RD1662
RD1672
RD1407
RD162
RD163
RD166
RD167
RD170
RD171
RD168
RD169
RD158
RD158
RD1672
RD166
RD1407
RD166
RD167
RD166
RD167
RD1724
4
RD173
RD1724
RD1734
RD162
RD163
RD1031
RD1021,4
NA
RD82
RD81
NA
RD223
RD219
RD1235
NA
RD143
RD2209
RD82
RD150
RD166
RD167
RD1754,8
RD1734,8

1
The C-clip used in the OE differential cannot be used in the Air Locker. Refer to installation guide or Air Locker Service & Parts
Manual for alternative 'spring retained stub' fitment method.
2
Reverse rotation Dana 60 front ends with aftermarket ring & pinion sets all use RD167 regardless of the gear ratio.
3
Dana 44's, 50's, 60's and Ford 8.8's were all found in these vehicles. Use housing markings and axle splines to identify.
4
5
Suits the shimmed type third member (not the early adjuster nut type) which can be visually identified by the Dana logo cast into
the third member between the two fins of the right hand side.
6
Floating thrust block(s) are included but should ONLY be installed on semi-floating axle assemblies.
7
Ford's 10.25" & 10.5" Corporate Sterling (RD140) can be identified by the absence of a filler hole in the OE inspection cover.
8
9
Models equipped with OE locking rear diff (LRD) require axle shafts replaced with non-LRD axles. Further details in installation guide.
Page 5
Holden
HOLDEN
Vehicle/Model
Axle Loc'n
Year
Description
Holden Jackaroo
Front
Rear
Independent suspension (IFS)

Turbo diesel & V6 petrol only
All models
Non-LSD models
Holden Rodeo/Colorado,
Colorado 7
Front
Front
Rear
1988 on
1987-91
1993-97
1998-99
2000 on
1988 on
2012 on
1987-91
1993 on
2012 on
1998 on
1998 on
Front
Rear
1990 on
1999 on
Rear
Holden Suburban
Holden Frontera/Sport

AAM 760,IFS
4x4 diesel & 4x2 diesel models
All models including 4x2
AAM 860 (8.6")
1500 petrol engine
2500 diesel engine
Dana 44
Shaft
Diameter
28.4 (1.12")
33.5 (1.32")
33.5 (1.32")
38.1 (1.50")
38.1 (1.50")
28.4 (1.12")
30.5 (1.20")
33.5 (1.32")
33.5 (1.32")
33.3 (1.31")
Shaft
Spline
17
26
26
23
23
17
28
26
26
30
Ratio
All
All
All
All
All
All
All
All
All
All
33.3 (1.31")
30
2.73 & UP
28.4 (1.12")
33.3 (1.31")
17
30
All
4.56 & UP
4.13 & DN
ARB
Part No.
RD2031
RD213
RD213
RD853
NA3
RD2031
RD148
RD213
RD2134
6
NA
NA
RD84
NA
RD2031
2,5
RD117
5
RD117

1
Some builds between December 1996 and May 1998 used an unidentified 3rd member and carrier with a different
ring gear bolt pattern. A 3rd member with the same ratio may be swapped from earlier or later models for Air Locker installation.
2
Aftermarket Dana 44 ring and pinion ratios of 4.56 & up will require RD116 instead.
3
Third member may be swapped from pre-2000 non-LSD model for RD85 fitment.
4
2003 on models may require thrust block removal or axle shaft shortening.
5
6
Under development.
Hyundai
HYUNDAI
Vehicle/Model
Axle Loc'n
Year
Description
Terracan
Front
Rear
Front
Rear
2001 on
2001 on
All models
All models
All models
Galloper/Galloper II
1
2
3
8.00" 10 bolt RG2

9.00" 12 bolt RG3
Shaft
Diameter
28.8 (1.13")
34.8 (1.37")
28.8 (1.13")
30.5 (1.20")
30.5 (1.20")
Shaft
Spline
28
34
28
28
28
Ratio
All
All
All
All
All
ARB
Part No.
RD1101
RD156
1
RD110
RD210
RD212
Air Locker fitment requires larger ring gear bolt holes. Reaming from 10.2mm to 12.2mm [31/64"] is required.
8" differential has a crown wheel inside diameter of 124mm.
9" differential has a crown wheel inside diameter of 145mm.
Isuzu
ISUZU
Vehicle/Model
Axle Loc'n
Year
Description

4x4 diesel & 4x2 diesel models
All models including 4x2
Dana 44
Shaft
Diameter
28.4 (1.12")
33.5 (1.32")
33.5 (1.32")
38.1 (1.50")
38.1 (1.50")
28.4 (1.12")
33.5 (1.32")
33.5 (1.32")
28.4 (1.12")
33.3 (1.31")
Shaft
Spline
17
26
26
23
23
17
26
26
17
30
Isuzu Trooper
Front
Rear

Turbo diesel & V6 petrol only
All models
Non-LSD models
Isuzu Pickup,D-Max
Opel Campo
Front
Rear
Isuzu Rodeo/Sport,
Isuzu Amigo, MU
Front
Rear
1988 on
1987-91
1993-97
1998-99
2000 on
1988 on
1987-91
1993 on
1990 on
1999 on
Isuzu Axiom,
Honda Passport
Front
Rear
2001 on
2001 on

Dana 44
28.4 (1.12")
33.3 (1.31")
17
30
Ratio
All
All
All
All
All
All
All
All
All
4.56 & UP
4.13 & DN
All
4.56 & UP
4.13 & DN
ARB
Part No.
1
RD203
RD213
RD213
NA
NA
RD2031
RD213
RD2133
RD2031
RD1172,4
RD1174
RD2031
RD1172,4
RD1174

1
Some builds between December 1996 and May 1998 used an unidentified 3rd member and carrier with a different
ring gear bolt pattern. A 3rd member with the same ratio may be swapped from earlier or later models for Air Locker installation.
2
Aftermarket Dana 44 ring and pinion ratios of 4.56 & up will require RD116 instead.
3
2003 on models may require thrust block removal or axle shaft shortening.
4
NOTE: Applications for Isuzu Pickups may vary internationally. Axle model must be checked prior to purchase of Air Locker.
Page 6
Land Rover
LAND ROVER
Vehicle/Model
Axle Loc'n
Year
Description
Range Rover
Front
To 1993
1993-96
1994-01
2002 on
To 1993
1993-96
1994-01
2002 on
To 1993
1993-98
To 1993
1993-98
All
All
2002 on
2004 on
2004-09
2009 on
1983-93
1993 on
1983-02
2002 on
Rover type
Rover type
Rover type, P38A
Rover type, L322
Rover type
Rover type
Rover type, P38A
Rover type, L322
Rover type
Rover type
Rover type
Rover type
Rover type
Rover type
Rover type, P38A
IRS, 31 spline, clamshell type, Disco 3 only
IRS Disco 4
Rover type
Rover type
Salisbury type
Rover type
Rover type, P38A
Rover type
Rover type
Rover type, 4 cyl. petrol & diesel engines
Rover type
Rover type, P38A
Rover type
Salisbury type
Salisbury type
Rover type
Salisbury type
Rover type
Salisbury type
Rear
Discovery
Front
Rear
Discovery Series II
Front
Rear
Discovery Series III/IV,

Range Rover Sport
Front
Rear
Defender 110, 130,

County
Front
Rear
Defender 90, County
Front
Front
1984-93
1993 on
1983-93
1993 on
2002 on
1979-83
Rear
Front
1979-83
1948-85
Rear
1948-85
Rear2
LWB models
V8 engine
Series III, Series II,
Series I
Shaft
Diameter
28.2 (1.11")
31.5 (1.24")
31.5 (1.24")
Shaft
Spline
10
24
24
Ratio
ARB
Part No.
3.54
3.54
3.54
28.2 (1.11")
31.5 (1.24")
31.5 (1.24")
10
24
24
3.54
3.54
3.54
RD1271,4
RD1281,5
5
RD138
NA
28.2 (1.11")
31.5 (1.24")
28.2 (1.11")
31.5 (1.24")
31.5 (1.24")
31.5 (1.24")
31.5 (1.24")
31.5 (1.24")
33.6 (1.32")
10
24
10
24
24
24
24
29
31
3.54
3.54
3.54
3.54
3.54
3.54
3.54
All
All
RD1271
RD1281,5
1
RD127
RD1281,5
RD1281,5
RD1286
RD1386
RD217
RD218
NA
28.2 (1.11")
31.5 (1.24")
31.5 (1.24")
31.5 (1.24")
31.5 (1.24")
28.2 (1.11")
31.5 (1.24")
28.2 (1.11")
31.5 (1.24")
31.5 (1.24")
28.2 (1.11")
31.5 (1.24")
31.5 (1.24")
28.2 (1.11")
31.5 (1.24")
28.2 (1.11")
31.5 (1.24")
10
24
24
24
24
10
24
10
24
24
10
24
24
10
24
10
24
3.54
3.54
3.54
3.54
3.54
3.54
3.54
3.54
3.54
3.54
3.54
3.54
3.54
4.7
4.7
4.7
4.7
RD1271
RD1281,5
RD161
1,4
RD127
1,5
RD128
5
RD138
NA
RD1286
6
RD138
RD1271
RD1281,5
RD1271
RD1281,6
RD1386
RD127
RD161
RD161
RD1272,3
RD160
RD1272,3
RD160

1
If vehicle was manufactured during 1993, check spline count.
2
Air Locker not available for vehicles equipped with high load option.
3
190102 ring gear spacer required. Longer ring gear bolts (not supplied) are also necessary - (Land Rover part no. 576521).
4
When an RD127 Air Locker is to be installed in Range Rovers manufactured prior to 1980 (approx.), special carrier bearings
(No. K11300/K11162) may also be necessary - Land Rover part no. RTC3426.
5
Some vehicles have crown wheel bolts which cannot be reused and must be replaced. Consult service manual.
6
P38A is most commonly found in traction control equipped vehicles. Identify P38A type diff by large 205mm [8.07"] flange diameter.
P38A was not used on North American delivered Discoverys - use RD128.
MAZDA
Mazda
Vehicle/Model
Axle Loc'n
Year
Bravo (Thai)
Front
Rear
All
To 2006
Front
Front
2006-12
2012 on
2006-11
2012 on
1990-94
Rear
1990-94
Front
1993-94
Dana 35
Rear
1993
BT-50 (Thai)
Rear
Navajo (US)
B4000, Pickup (US)
Description
Shaft
Diameter
Shaft
Spline
Ratio
2500/2600, 4 cylinder, Dana banjo type

6 cylinder, salisbury type
IFS, 30 spline
Dana 44,32 spline
All models (incl. OE locker equipped)4
30.8 (1.21")
32.8 (1.29")
30.8 (1.21")
31.5 (1.24")
35.8 (1.41")
34.6 (1.36")
29.5 (1.16")
30
30
30
29
32
32
27
30.5 (1.20")
33.5 (1.32")
29.5 (1.16")
28
31
27
30.5 (1.20")
33.5 (1.32")
28
31
All
All
All
All
All
All
2.73-3.31
3.54 & UP
All
All
2.73-3.31
3.54 & UP
All
All
Dana 35
ARB
Part No.
NA
1
RD123
NA
RD223
RD219
RD143
RD2204
RD103
3
RD102
2
RD82
2
RD81
RD103
3
RD102
2
RD82
2
RD81

1
Suits the shimmed type third member (not the early adjuster nut type) which can be visually identified by the Dana logo cast into
the third member between the two fins of the right hand side.
2
Axle spline must be determined for correct model selection.
3
4
Models equipped with OE locking diff (LRD) require axles replaced with non-OE LRD axles. Further details in installation guide.
Page 7
Mitsubishi
MITSUBISHI
Vehicle/Model
Axle Loc'n
Year
Description
Montero, Raider,
Pajero, Delica (van),
Shogun
Front
1989 on
1984-97
1983-86
1987-95
1993-00
2000 on
TBD
All
All
To 2008
All
2008 on
All
All
All
2002 on
IFS, 28 spline, 8.00" RG

Rear
Pajero/Montero iO,
Pinin, Shogun
Challenger
Montero Sport
Front
Rear
Front
Rear
Triton, L200, Pickup
Front
Rear
1
2
3
4
8.00" 10 bolt RG
9.00" 12 bolt RG2
3.5L & 2.8TDI, NJ,NK,NL, 9.5" RG, live axle
NM,NP,NS,NT 9.5" RG, IRS
TBD
8.00" 10 bolt RG1
IFS, 28 spline
3.0L petrol, 2.5L diesel, 9.00" RG
3.5L, 9.50" RG
2.5L, 9.50" RG
9.00" RG
9.50" RG
Small differential has a crown wheel inside diameter of 124mm.

Large differential has a crown wheel inside diameter of 145mm.
Will not fit 2.8L turbo diesel with intercooler or 3.5L petrol vehicles.
Some 28 spline axles have the smaller 7.25" RG and will not accept RD110.
Shaft
Diameter
28.8 (1.13")
30.5 (1.20")
30.5 (1.20")
33.6 (1.32")
TBD
30.5 (1.20")
28.8 (1.13")
30.5 (1.20")
33.6 (1.32")
33.6 (1.32")
28.8 (1.13")
30.5 (1.20")
33.6 (1.32")
Shaft
Spline
28
25
28
28
31
33
TBD
28
28
28
31
31
28
25
28
31
Ratio
All
All
All
All
All
All
TBD
All
All
All
All
All
All
All
All
All
ARB
Part No.
4
RD110
NA
RD210
RD212
RD154
RD155
NA
RD210
RD110
RD212
RD154
RD154
RD1104
NA
RD212
RD154
Page 8
Nissan
NISSAN
Vehicle/Model
Axle Loc'n
Year
Description
Navara D21, D22
Front
Rear
1986 on
1986 on
1986 on
Front
1986-97
2002 on
2005 on
Rear
2005 on
Front
All
Xterra
Rear
Front
All
All
Pathfinder WD21,R50
Rear
Front
All
1986-05
Rear
1986-97
1986-05
Front
2005 on
Rear
2005 on
Front
2010 on
Rear
2010 on
Y61, Patrol GU
Front
Rear
1998 on
1998 on
1998 on
Y60, Patrol GQ
Front
Rear
160, Patrol MQ
Front
1988-98
1988-98
1988-98
1979-88
1979-88
1979-88
1979-88
All
1997 on
2003 on
2004 on
2004-09
2009 on
2004 on
2004 on
R180A,8 bolt RG (4 cyl.)

R200A, 10 bolt RG (6 cyl.)
H233B,31 spline (6 cyl.)
C200,29 spline (4 cyl.)
C200,31 spline
R180A,10 bolt RG
R180A,10 bolt RG
D40,M226,10 bolt RG (Spain made)
D40,M226,12 bolt RG (Thailand made)
R180A,10 bolt RG
R180A,10 bolt RG
TBD
R180A,10 bolt RG
R180A,10 bolt RG
C200K
R180A,4 cyl.
R200A,6 cyl.
C200,29 spline (4 cyl.)
R180A,10 bolt RG
R180A,10 bolt RG
M205 (USA built V8)
R230,33 spline,IRS
R230,33 spline,IRS
C200K,31 SPL
C200K,34 SPL
R248,34 spline,IRS
R230,33 spline,IRS
R230,33 spline,IRS
H233B
H233B 'small'
H260 'large', 37 spline
H260 'large', 34 spline, full-floating
H233B,31 SPL
H233B,33 SPL
H260, leaf sprung cab chassis & utility
C200
C200
H233
H260
TBD
H233B
H233B
M205
M226,32 spline
TBD
M205
R230,33 spline,IRS
R230,33 spline,IRS
Navara D40
Frontier, Pickup,
Wagon
Pathfinder R51
Y62, Patrol,
Infinity QX55
Rear3
Terrano II Wagon
Front
Rear
Titan
Front
Rear
Armada
Front
Rear
Shaft
Diameter
27.8 (1.09")
30.4 (1.20")
32.0 (1.26")
33.3 (1.31")
30.4 (1.20")
32.0 (1.26")
27.8 (1.09")
27.8 (1.09")
35.8 (1.41")
35.8 (1.41")
27.8 (1.09")
27.8 (1.09")
TBD
27.8 (1.09")
27.8 (1.09")
32.0 (1.26")
27.8 (1.09")
30.4 (1.20")
30.4 (1.20")
32.0 (1.26")
33.3 (1.31")
27.8 (1.09")
27.8 (1.09")
32.8 (1.26")
33.3 (1.31")
33.3 (1.31")
32.0 (1.26")
34.8 (1.37")
34.8 (1.37")
33.3 (1.31")
33.3 (1.31")
32.0 (1.26")
33.3 (1.31")
38.4 (1.51")
34.8 (1.37")
32.0 (1.26")
33.3 (1.31")
38.4 (1.51")
30.4 (1.20")
30.4 (1.20")
32.0 (1.26")
38.4 (1.51")
TBD
32.0 (1.26")
33.3 (1.31")
32.8 (1.29")
35.8 (1.41")
TBD
32.8 (1.29")
33.3 (1.31")
33.3 (1.31")
Shaft
Spline
27
29
31
33
29
31
27
27
32
32
27
27
TBD
27
27
31
27
29
29
31
33
27
27
30
33
33
31
34
34
33
33
31
33
37
34
31
33
37
29
29
31
37
TBD
31
33
30
32
TBD
30
33
33
Ratio
All
All
All
All
All
All
3.69 & UP
3.54 & DN
All
All
3.69 & UP
3.54 & DN
TBD
3.69 & UP
3.54 & DN
All
All
All
All
All
All
3.69 & UP
3.54 & DN
All
3.54 & UP
3.36 & DN
All
All
All
3.54 & UP
3.36 & DN
All
All
All
All
All
All
All
All
All
All
All
TBD
All
All
All
All
TBD
All
3.54 & UP
3.36 & DN
ARB
Part No.
RD182
4
RD202
3,4,6
RD136
RD1353,6
RD2021,3,4
RD2013,4
RD180
RD181
RD1495
RD1595
RD180
RD181
TBD
RD180
RD181
RD196
RD182
RD2024
RD2021,3,4
RD1363,4,6
RD1353,4,6
RD180
RD181
RD224
RD1372
NA2
RD1967
RD2287
RD1953
RD1372,3
NA2
RD1364,6
RD1353,6
RD2153,4
3
RD214
RD1364,6
RD1353,6
RD2154
RD2024
RD2024
RD134
RD2154
TBD
RD1363,4,6
3,6
RD135
RD224
RD149
TBD
RD224
RD1372
NA2

1
Only suitable for differentials with 12mm crown wheel bolts.
2
RD137 does not suit ratio up to 3.36:1 due to RG offset.
3
Refer to dealer or check spline count to determine axle type.
4
Floating thrust block(s) are included but should ONLY be installed on semi-floating axle assemblies. Refer to installation guide.
5
Use country of manufacture to determine diff type.
6
RD134, RD135 & RD136 require the higher rated 50mm ID carrier bearing (Timken #32010X - ARB #160116).
7
A replacement righthand side axle seal will be required for each removal of the OE straight shaft to access the diff.
Page 9
Santana
SANTANA
Vehicle/Model
Axle Loc'n
Anibal, PS10
Front
Rear
Front
Rear
Front
Rear
PS300
PS350
1
2
Year
Description
All models (Land Rover type)
All models
10 bolt RG (Suzuki Vitara type)
12 bolt RG
10 bolt RG (Suzuki Vitara type)
12 bolt RG
Shaft
Diameter
27.4 (1.08")
27.4 (1.08")
27.4 (1.08")
27.4 (1.08")
Shaft
Spline
10
24
26
26
26
26
Ratio
All
All
All
All
All
All
ARB
Part No.
1
RD127
RD126
RD208
NA2
RD2082
NA2
Requires ring gear spacer (ARB part # RD03A) ordered separately.

Requires 10 bolt RD208 conversion using PS300 front third member assembly of same ratio.
SsangYong
SSANGYONG
Vehicle/Model
Axle Loc'n
Year
Description
Musso / Rexton /
Korando
Rear
1996 on
1996 on
Dana 44, manual

Dana 44, automatic
Shaft
Diameter
33.3 (1.31")
33.3 (1.31")
Shaft
Spline
30
30
Ratio
4.55
3.73
ARB
Part No.
RD1161
RD1171

1
Suzuki
SUZUKI
Vehicle/Model
Axle Loc'n
Year
Description
Sierra / Samurai / Jimny

Holden Drover
Maranti Gypsy
Front
2003 on
1998-03
1984-98
1984 on
1990-95
1990-98
1988-98
Rear
Front
Rear
Front
Jimny (Japan only)

(JA11, JA12)
Vitara / Sidekick
Grand Vitara, XL7
Rear
1
2
3
1998-05
2005 on
1988-93
1993-00
1998-05
2005 on
Jimny model with 10 bolt RG

Jimny model with 8 bolt RG
Leaf spring suspension
1.3 litre models only
JA11, 660cc turbocharged engines ONLY
JA11 & JA12, 660cc turbocharged engines
26 spline
22 spline
26 spline ADD
Shaft
Diameter
23.9 (0.94")
23.9 (0.94")
23.9 (0.94")
27.4 (1.08")
23.9 (0.94")
27.4 (1.08")
27.4 (1.08")
23.9 (0.94")
27.4 (1.08")
Shaft
Spline
22
22
22
26
22
26
26
22
26
Suzuki 10 bolt RG
Suzuki 12 bolt RG (excl. Grand Vitara)
26 spline
28 spline IRS
27.4 (1.08")
27.4 (1.08")
27.4 (1.08")
28.8 (1.13")
26
26
26
28
Ratio
All
All
All
All
All
All
All
All
All
All
All
All
All
All
ARB
Part No.
RD206
RD207
RD205
RD208
RD207
RD208
RD208
RD205
NA2
NA
RD2041
RD2091
NA3
NA
Note that in some (Asian) countries, the Dana 30 salisbury type axle was used from 1993 on. See RD100 & RD101.
Grand Vitara/XL7 (to 2005) front requires conversion using RD208, Vitara/Sidekick third member assembly and free wheeling hubs.
Grand Vitara/XL7 (to 2005) rear requires conversion using Vitara/Sidekick third member assembly (& 26 spl axle shafts if required).
No application for current model (2005 on) Grand Vitara.
Page 10
Toyota / Lexus
TOYOTA / LEXUS
Vehicle/Model
Axle Loc'n
Year
Description
LandCruiser J200 Series
Front
Rear
Front
2007 on
2007 on
1998 on
1998 on
1998 on
1996-03
2003 on
LandCruiser 71, 76, 78,

79, 100 & 105 Series,
Lexus LX470
LandCruiser Prado,
90, 120 and 150 Series,
Lexus GX
Rear
Front
Rear
LandCruiser 40, 55, 60,
62, 70, 73, 74, 75 &
80 Series,Lexus LX450
Front
Rear
FJ40s made in
South America
Bundera, LandCruiser II,
LJ70, RJ70
Rear
HiLux, Pickup, Hiace,

Fortuner
Front
Front
Rear
Rear
4Runner, LN61, YN63
8" dia. RG, 10 bolt

8.25" dia. RG, 12 bolt (shimmed)
12 bolt, full floating
10 bolt, full floating
12 bolt, semi floating, 45mm bearing ID
12 bolt, full floating, 45mm bearing ID
12 bolt, full floating, 50mm bearing ID
12 bolt, semi floating, 50mm bearing ID
Dana 60
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
30
30
30
30
30
30
30
30
30
All
To 1985
1986 on
All
To 2005
2005 on
10 bolt
10 bolt, 45mm bearing ID
10 bolt, 50mm bearing ID
10 bolt, live axle
7.5" dia. RG,10 bolt, IFS
8" dia. RG, IFS clamshell, 53mm BRNG
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
28 (1.1")
33 (1.31")
30
30
30
30
27
30
To 1988
1988-05
2005 on
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
28 (1.1")
33 (1.31")
30
30
30
30
30
27
30
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
33 (1.31")
28 (1.1")
33 (1.31")
34.8 (1.37")
28 (1.1")
33 (1.31")
36.8 (1.45")
34.8 (1.37")
28 (1.1")
33 (1.31")
30
30
30
30
30
30
27
30
34
27
30
36
34
27
30
33 (1.31")
30
33 (1.31")
33 (1.31")
34.8 (1.37")
30
30
34
All
To 2003
2003 on
Rear
1984-88
1988-10
1988-10
2010 on
2005 on
4 cylinder, 45mm bearing ID

V6, 4WD, 50mm bearing ID
V6, 2WD, 45mm bearing ID
8.25" dia. RG, 12 bolt (shimmed)
To 2004
All
2007 on
To 2006
To 2006
2007 on
2007 on
To 2008
To 2007
2008 on
2005 on

8" dia. RG, 12 bolt
All models
8" dia. RG, 12 bolt
10.5" dia. RG
All models
8" dia. RG, 12 bolt, live axle
10" dia. RG, IRS
2006-09
2010 on
TBD
8" non-factory locker model

8.25" dia. RG, non-factory locker model
10.5",34 SPL
Tundra
Rear
Front
Rear
Front
Rear
Front
Rear
Dyna 150
1996 on
2009 on
To 1989
1990-97
1969-76
1977-89
1990-97
1977-92
Front
Front
FJ Cruiser
Shaft
Spline
34
32
30
30
32
27
30
4 cylinder, 45mm bearing ID

All models, 50mm bearing ID
Adjuster nut models, 50 or 53mm bearing ID
Dana Spicer shim adjusted models.
10 bolt, live axle
T100, Tacoma
Sequoia
All models
All models
8" dia. RG, IFS, 50mm bearing ID
Live axle suspension
All models
Shaft
Diameter
34.8 (1.37")
34.8 (1.37")
33 (1.31")
33 (1.31")
34.8 (1.37")
28 (1.1")
33 (1.31")
Rear
Ratio
All
All
All
All
All
All
3.91 & UP
3.73 & DN
All
All
All
All
All
All
All
All
4.56 & UP
4.10 & DN
All
All
All
All
All
3.91 & UP
3.73 & DN
All
All
All
All
All
All
3.91 & UP
3.73 & DN
All
All
All
All
3.91 & UP
3.73 & DN
All
All
All
All
All
All
All
All
All
All
3.91 & UP
3.73 & DN
All
All
All
ARB
Part No.
6
RD151
RD152
RD131
RD132
RD152
RD90
RD111
RD1213
RD132
RD193
1
RD142
RD132
RD1531
RD1421
RD142
RD153
RD162
RD163
RD1321
RD1321
RD132
RD1321
2
RD90
RD1113
RD1213
RD1321
RD132
RD1324
RD1335
RD1321
RD902
RD1113
RD1213
RD1321
RD132
RD1321
RD193
RD1113
RD1213
RD90
RD129
RD1516
RD90
RD129
RD146
RD1516
RD90
RD129
TBD
RD1113
RD1213
RD132
RD193
RD183

1
Late model 50.00mm [1.969"] ID carrier bearings (e.g., from FJ/HJ80 model) must be used. This will also improve bearing life.
2
Does not fit some 1986-1995 manual hub models with larger 33mm [1.30"] dia. 27 spline axle shafts.
3
Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
4
Some models have 53mm bearing ID and require new carrier bearings (ARB# 160118 or Koyo #TR100802-2).
5
Shim adjusted Dana Spicer made models came in some vehicles from South Africa and South America.
6
Carrier bearings are available from ARB #160119.
Volkswagen
VOLKSWAGEN
Vehicle/Model
Axle Loc'n
Year
Amarok
Front
Rear
2010 on
2010 on
Description
Shaft
Diameter
Shaft
Spline
Ratio
33.3 (1.31")
30
All
Amaroks were built with ring gear welded to the front diff. No aftermarket application is feasible at this time.
ARB
Part No.
NA1
RD198
Page 11
Description
Ford 9"
Ford 9" COMPETITION
Dana 30
Dana 35
Dana 35
Dana 44
Dana 44
Dana 44
Dana 44
Dana 60
Dana 60
Dana 70/Dana 80
Dana 70/Dana 80
Dana 70/Dana 80
Dana 70/Dana 80
Rockwell 2.5 Ton
Rockwell 2.5 Ton
Ratio
ALL
ALL
3.73 & UP
3.54 & UP
3.54 & UP
3.73 & DN
3.92 & UP
3.92 & UP
3.73 & DN
4.56 & UP
4.10 & DN
xxx & UP
xxx & DN
xxx & UP
xxx & DN
ALL
ALL
Notes
Does not suit OE third member
Does not suit OE third member
Suits C-clip or non-C-clip type shafts
Suits ONLY non-C-clip retained shafts (4 pinion)
Suits all ratios of some late model D44 (e.g. JK)
Suits all ratios of some late model D44 (e.g. JK)
'Low Speed Carrier'

'High Speed Carrier'
'Low Speed Carrier'
'High Speed Carrier'
Spline
Count
35
35
30
30
30
32
33
35
35
40
40
37
37
40
40
16
40
Shaft
Diameter
38.1 (1.50")
38.1 (1.50")
33.3 (1.31")
33.3 (1.31")
33.3 (1.31")
35.8 (1.41")
34.8 (1.37")
38.1 (1.50")
38.1 (1.50")
43.2 (1.70")
43.2 (1.70")
40.6 (1.60")
40.6 (1.60")
43.2 (1.70")
43.2 (1.70")
41.3 (1.63")
43.2 (1.70")
Spline
Type
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
24/48 DP
TAPERED
24/48 DP
Pressure
Angle
30
30
30
30
30
37.5
45
30
30
45
45
45
45
45
45
30
45
ARB
Part No.
1
RD99
1
RD99CE
RD104
RD105
RD125
RD143
RD113
RD109
RD147
RD188
RD189
RD174
RD175
RD176
RD177
RD145
RD200
NOTE: Performance application models do not suit any original equipment axle shafts.
Custom shafts to suit your specific axle assembly must be obtained.
Contact ARB for more information on performance upgrades available to suit your axle type.
1
Can be manually modified to accept some other axle splines. Contact ARB.
RD99 will suit Ford 9 3/8" third member if alternative ARB adjuster nut is used.
Differential Covers
Differential Covers
Axle Type
Application Notes
Dana 30
Not suitable for IFS applications.
Dana 35
Dana 44
Not suitable for Dana 44A (aluminum housing) or 'banjo' style axles.
ARB
Part No.
0750002
0750002B
0750004
0750003
0750003B
0750001
0750001B
0750005
0750005B
0750006
0750006B
0750007
0750007B
0750008
0750008B
Dana 50, Dana 60,

Land Rover Salisbury
Chrysler 8.25"
Ford 8.8
Chev 10 Bolt, AAM 850/860
Dana M226 (Nissan)
NOTES : Cast differential covers are designed to suit a wide range of vehicles globally, and as such, care must be
exercised when fitting to assure that interference with suspension components and other surrounding features can be
accounted for. Therefore, some modifications to the cover and/or vehicle may be required for correct installation.
All covers come powdercoated, precision machined, and clear coated.
Where cooling means have been employed on the cover being replaced alternative cooling means should be considered.
Known applications for differential cover models have been highlighted throughout this chart with or symbols
depending on colours available.
Air Compressors
Air Compressors
Description
Voltage
On-Board Air Compressor Kit,Compact

On-Board Air Compressor Kit,High Output
On-Board Air Compressor Kit,High Output
Portable Air Compressor Kit,High Output
Twin On-Board Air Compressor Kit,Maximum Output
Twin On-Board Air Compressor Kit,Maximum Output
Twin Portable Air Compressor Kit,Maximum Output
Twin Portable Air Compressor Kit,Maximum Output
1
2
12V/24V
12V
24V
12V
12V
24V
12V
24V
Performance @ 0 Bar [ 0 PSI ]

LPM
CFM
Amps
27.7
0.98
5.5
87.2
3.08
14.2
87.2
3.08
7.1
3.081
87.2
14.2
174.4
6.16
28.4
174.4
6.16
14.2
174.4
6.16
28.4
174.4
6.16
28.4
Duty Cycle
22C [72F]
35%
50%
50%
50%
100%
100%
100%
100%
Flow is measured directly from compressor. Restriction due to the tire inlet valve of a vehicle may effect actual filling rate.
Unit may be directly wired to one of the two 12V batteries of a 24V vehicle due to the light amp load.
ARB
Part No.
CKSA12
CKMA12
CKMA24
CKMP12
CKMTA12
CKMTA24
CKMTP12
CKMTP24
Page 12
ARB Part No.

RD05
RD12
RD40
RD46
RD50
RD51
RD53
RD54
RD65
RD66
RD80
RD81
RD82
RD83
RD84
RD85
RD90
RD91
RD93
RD97
RD98
RD99
RD100
RD101
RD102
RD103
RD104
RD105
RD109
RD110
RD111
RD113
RD114
RD115
RD116
RD117
RD119
RD121
RD123
RD125
RD126
RD127
RD128
RD129
RD131
RD132
RD133
RD134
RD135
RD136
RD137
RD138
RD139
RD140
RD141
RD142
RD143
RD145
RD146
RD147
RD148
RD149
RD150
RD153
RD154
RD155
RD156
RD157
RD158
RD159
RD160
RD161
RD162
RD163
RD164
RD165
RD166
RD167
APPLICATIONS BY PART NUMBER
Description
Mitsubishi 8",RR,28 SPL
GM 12 Bolt,8.9",30 SPL,3.73 & UP
GM 14 Bolt,9.5",C-clip
Dana 50,30 SPL
GM / AAM 9.25",33 SPL
Dana 70HD,35 SPL,4.56 & UP
Dana 70HD,35 SPL,4.10 & DN
Dana 70U,35 SPL,4.56 & UP
Dana 70U,35 SPL,4.10 & DN
Dana 80,35 SPL
Ford 8.8",31 SPL
Ford 8.8",28 SPL
GM 8.5"/10 Bolt/AAM 860,28 SPL
GM 8.5"/10 Bolt/AAM 860,30 SPL
Isuzu RR,23 SPL,non-LSD
Toyota 7.5" IFS
Dana 80,37 SPL
Chrysler 8.25",29 SPL
Dana 70,32 SPL,4.56 & UP
Dana 70,32 SPL,4.10 & DN
Ford 9",35 SPL,2" BRNG
Dana 30,27 SPL,3.73 & UP
Dana 30,27 SPL,3.54 & DN
Dana 35,27 SPL,3.54 & UP
Dana 35,27 SPL,3.31 & DN
Dana 30,30 SPL,3.73 & UP
Dana 35,30 SPL,3.54 & UP
Dana 44,35 SPL,3.92 & UP
Mitsubishi IFS,28 SPL
Toyota 8" IFS,53mm BRNG
Dana 44,33 SPL,3.92 & UP
GM 14 Bolt,10.5",FF
Dana 44,30 SPL,3.92 & UP
Dana 44,30 SPL,3.73 & DN
Ford 9",31 SPL
Mazda,RR,shim adjusted
Dana 35,non C-clip,30 SPL,3.54 & UP
Santana Anibal,RR
Land Rover,10 SPL,Banjo
Land Rover,24 SPL,Banjo
Toyota Tacoma,RR
Toyota 8",50mm BRNG
Toyota 8",RR,shim adjusted
Nissan H233,31 SPL
Nissan H233B,33 SPL
Nissan H233B,31 SPL
Nissan Pathfinder R51,33 SPL,RR
Land Rover,24 SPL,Banjo,P38A
AAM 11.5"
Ford 10.25" & 10.5" (Sterling / corporate)
Toyota 8" IFS,34 SPL
Toyota 8.9",50mm BRNG
Dana 44,32 SPL,3.73 & DN
Rockwell 2.5 Ton
Toyota 10.5",36 SPL,RR
Dana 44,35 SPL,3.73 & DN
AAM 760,28 SPL,IFS
Nissan M226,32 SPL,10 bolt RG
Ford 9.75",34 SPL
Toyota 8.9",C-clip,50mm BRNG
Mitsubishi 9.5",31 SPL,LIVE AXLE
Mitsubishi 9.5",33 SPL,IRS
Hyundai 9.5",34 SPL,LIVE AXLE
Jeep JK Rubicon,35 SPL
Dana 50,30 SPL
Nissan M226,32 SPL,12 bolt RG
Land Rover,Salisbury,4.70:1
Land Rover,Salisbury,3.54:1
Dana 60,30 SPL,4.56 & UP
Dana 60,30 SPL,4.10 & DN
Dana 60,32 SPL,4.56 & UP
Dana 60,32 SPL,4.10 & DN
Dana 60HD,35 SPL,4.10 & DN
Splines
28
30
33
28
30
33
35
35
35
35
35
31
28
28
30
23
27
37
29
32
32
35
27
27
27
27
30
30
35
28
30
33
30
37
30
30
31
30
30
30
24
10
24
30
30
30
30
31
33
31
33
24
30
35
34
30
32
16
36
35
28
32
34
30
31
33
34
35
30
32
24
24
30
30
32
32
35
35
Ratio
All
3.73 & UP
All
All
All
All
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
Varies by Mfg.
All
All
2.73 & UP
2.73 & UP
All
All
Varies by Mfg.
All
4.56 & UP
4.10 & DN
All
3.73 & UP
3.54 & DN
3.54 & UP
3.31 & DN
3.73 & UP
3.54 & UP
3.92 & UP
All
3.91 & UP
3.92 & UP
4.10 & DN
4.56 & UP
3.92 & UP
3.73 & DN
All
3.73 & DN
All
3.54 & UP
All
3.54
All
All
All
All
All
All
All
All
3.54 & UP
All
All
All
All
All
3.73 & DN
All
All
3.73 & DN
All
All
All
All
All
All
All
All
All
All
4.7
3.54
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
4.56 & UP
4.10 & DN
Superseded Part #(s)
RD25
RD15
RD16
RD10
RD28
RD30
RD31
RD49,RD59,RD69
RD48,RD58,RD68
RD06
RD07
RD55,RD55A,RD55B
RD03
RD56
RD89
RD92
RD01,RD23
RD04
RD17,RD24
RD09,RD78,RD78A
RD57
RD37
RD02,RD33
RD08,RD124
RD50
RD32
RD20
RD21
RD22
RD95
RD96
RD35
RD36
Please note that reporting any incorrect application data or any new vehicle application
suitability that you may find to ARB Head Office in Australia will assure that your information
is verified to the best of our ability and that any verified input will be included in future
updates of this application chart.
Page 13
ARB Part No.

RD168
RD169
RD170
RD171
RD172
RD173
RD174
RD175
RD176
RD177
RD180
RD181
RD182
RD186
RD187
RD188
RD189
RD193
RD195
RD196
RD197
RD198
RD201
RD202
RD203
RD204
RD205
RD206
RD207
RD208
RD209
RD210
RD212
RD213
RD214
RD215
RD216
RD217
RD218
RD219
RD220
RD223
RD224
RD226
APPLICATIONS BY PART NUMBER
Description
Dana 60HD,C-clip,35 SPL,4.56 & UP
Dana 60HD,C-clip,35 SPL,4.10 & DN
Dana 70/80,32 SPL,LOW SPEED
Dana 70/80,32 SPL,HIGH SPEED
R180A,27 SPL,10 bolt RG,3.69&UP
R180A,27 SPL,10 bolt RG,3.54&DN
R180A,27 SPL,8 bolt RG (D22 4 cyl.)
AMC Model 20,3.08 & UP
AMC Model 20,2.73:1
Dana 60XHD,40 SPL,4.56 & UP
Dana 60XHD,40 SPL,4.10 & DN
Toyota 8.25" RR,12 Bolt RG,shim adjusted
Nissan Patrol Y62, RR
Nissan C200K, 31 SPL
AAM 925/950,33 SPL
VW Amarok Rear
Nissan C200,31 SPL
Nissan C200/R200A,29 SPL
Isuzu IFS,17 SPL
Suzuki Vitara,RR,26 SPL,10 bolt RG
Suzuki,FR,22 SPL,10 bolt RG
Suzuki Jimny,FR,22 SPL,10 bolt RG
Suzuki Jimny,FR,22 SPL,8 bolt RG
Suzuki,26 SPL,10 bolt RG
Suzuki Vitara,RR,26 SPL,12 bolt RG
Isuzu,RR,26 SPL
Nissan H260,34 SPL
Nissan H260,37 SPL
GM 12 Bolt,8.9",30 SPL,3.73 & UP
LR Discovery 3 + 4, FR, 29 SPL
LR Discovery 3, RR, 31 SPL
T6 Ranger/BT50, FR, 29 SPL
T6 Ranger/BT50, RR, 32 SPL
Ranger/BT50 IFS, 30 SPL
Nissan M205
Dana 44A (aluminium)
Splines
35
35
32
32
35
35
37
37
40
40
27
27
27
29
29
40
40
30
34
31
33
30
31
29
17
26
22
22
22
26
26
28
28
26
34
37
30
29
31
29
32
30
30
30
Ratio
4.56 & UP
4.10 & DN
xxx & UP
xxx & DN
xxx & UP
xxx & DN
xxx & UP
xxx & DN
xxx & UP
xxx & DN
3.69 & UP
3.54 & DN
All
3.08 & UP
2.73
4.56 & UP
4.10 & DN
All
All
All
All
All
All
All
All
All
All
All
All
All
All
All
All
All
All
All
3.73 & UP
All
All
All
All
All
All
All
Superseded Part #(s)

RD42
RD43
RD97
RD98
RD53,RD65
RD54,RD66,RD80
RD115
RD91
RD60
RD47
RD51
RD106
RD27,RD107
RD94
RD74
RD73,RD75
RD118
RD77,RD87
RD72,RD88
RD79
RD05
RD25, RD46
RD44
RD144
RD70,RD71
RD12
GENERAL NOTES:
While every effort has been made to ensure

that this list is accurate, ARB Corporation Ltd.
cannot possibly guarantee its accuracy or
completeness given the large number of vehicle
makes, models, and option variations, and
therefore it is the client's responsibility to
establish the correct model Air Locker
for their application.
While ARB supplies Air Lockers for the front of
many vehicles, they should only be engaged
for off-highway use only.
'TBD' refers to information that is still yet 'To Be Determined' at the time this list was last updated.
'& UP' following the ratio means that the Air Locker is suitable for the stated ratio and those
which are numerically higher.
'& DN' following the ratio means that the Air Locker is suitable for the stated ratio and those
which are numerically lower.
'RG' refers to the 'Ring Gear' or 'crown wheel' of the vehicle.
'dia RG' refers to the outside diameter taken over the outside of the ring gear teeth.
'SPL' refers to the spline count of the axle shaft.
'FR' refers to front axle application.
'RR' refers to rear axle application.
'IFS' refers to independent front suspension.
'BRNG' refers to carrier bearing inside diameter.
'LSD' refers to vehicles originally equipped with a 'Limited Slip Differential'.
'Year xxxx on' refers to model years up to the revision date of this printing of the chart.
'OE' refers to the 'Original Equipment' the vehicle is fitted with at manufacture.
Part No. : 215109

Revision Date (d/m/y) : 27/10/2014
Please note that reporting any incorrect application data or any new vehicle application
suitability that you may find to ARB Head Office in Australia will assure that your information
is verified to the best of our ability and that any verified input will be included in future
updates of this application chart.
Designed and manufactured in Australia by
ARB CORPORATION LTD
INTERNATIONAL HEAD OFFICE:

ARB Corporation Limited
42-44 Garden Street,
Kilsyth, Victoria 3137 Australia
Tel : +61 (3) 9761 6622
Fax : +61 (3) 9761 6807
Australian Email : [email protected]
International Email : [email protected]
www.arb.com.au
NORTH AMERICAN ENQUIRY CENTRE:

ARB 4x4 Accessories
720 SW 34th Street
Renton, WA 98057
Tel : +1 (425) 264 1391
Fax : +1 (425) 264 1392
Toll Free: (866) 293-9078
Email: [email protected]
www.arbusa.com

Application Chart

Uploaded by

Copyright:

Available Formats

Application Chart

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Application Chart

Uploaded by

Copyright:

Available Formats

What vehicles are covered in the application guide?

What vehicles are covered in the application guide?

What information is provided for each vehicle application?

What information is provided for each vehicle application?

INTERNATIONAL

Copyright 2013 by ARB Corporation Limited.

AIR OPERATED LOCKING DIFFERENTIALS

This listing covers most

VEHICLE APPLICATION CHART

Chevrolet / GMC / Hummer

Applications By Part Number

CHEVROLET / GMC / HUMMER

Chevrolet / GMC / Hummer

Dana M44, 3600lb

GM 14 bolt, 10.5" dia. RG full floating

GM IFS 9.25" dia. RG

Dana 60HD, full floating

GM 14 bolt, 10.5" dia RG, full floating

GM 14 bolt, 10.5" dia. RG full floating

ARB Diff Cover available (RED and/or BLACK).

CJ(5, 6, 7 & 8),

1993-2004 Dana 44A, ZJ C-clip; WJ non C-clip

Chrysler 8.25" dia. RG, C-clip

Dana 351, non C-clip

Dana 44, Commanche truck

Dana 44, XJ w/ metric ton package

AMC Model 20, 8.875" dia. RG

Chrysler 8.25" dia. RG, C-clip

AMC Model 20, 8.875" dia. RG

AMC Model 20, 8.875" dia. RG

ZJ, WJ Grand Cherokee3

KJ,KK, Jeep Liberty,

J10, Light Truck,

J20, Medium Truck,

WK/WH Grand Cherokee,

ARB Diff Cover available (RED and/or BLACK).

100, 150, 200, 250,

300, 350, 400,

Dana 44, half ton truck

Dana 60, three quarter ton truck

Dana 70, three quarter ton truck

Dana 70U, three quarter ton truck

Chrysler 9.25" dia. RG

RAM 2500, 3500

AAM 925 (9.25")

ARB Diff Cover available (RED and/or BLACK).

Ford 9" dia. RG

Ford 9" dia. RG, 28 spline

Dana 44, C-clip

Dana 50,IFS w/ HD suspension option

Ford 10.25"/10.5" dia. RG,6250lb,full floating

Dana 60, full floating

Dana 70, full floating

Dana 60, semi floating (C-clip)

Ford 10.25" dia. RG, 6250lb, full floating

Dana 60, full floating

Dana 70HD,10.5" dia. RG

Dana 60, full floating

Dana 35 (V6 only)

Explorer, Ranger (US),