Scribd
Upload
168 views

Computer Architecture

Computer architecture is the conceptual design and fundamental operational structure of a computer system. It includes how the central processing unit performs internally and accesses memory addresses. Computer architecture can be classified into three categories: instruction set architecture, computer organization, and system design. The central processing unit performs all arithmetic and logical calculations and reads/executes program instructions from memory. It consists of a control unit, arithmetic logic unit, and register set.

Uploaded by

Agrippa Mungazi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
168 views

Computer Architecture

Computer architecture is the conceptual design and fundamental operational structure of a computer system. It includes how the central processing unit performs internally and accesses memory addresses. Computer architecture can be classified into three categories: instruction set architecture, computer organization, and system design. The central processing unit performs all arithmetic and logical calculations and reads/executes program instructions from memory. It consists of a control unit, arithmetic logic unit, and register set.

Uploaded by

Agrippa Mungazi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Computer architecture is the conceptual design and fundamental operational structure of a

computer system. It is a blueprint and functional description of requirements and design


implementations for the various parts of a computer, focusing largely on the way by which the
central processing unit (CPU) performs internally and accesses addresses in memory. It may also
be defined as the science and art of selecting and interconnecting hardware components to create
computers that meet functional, performance and cost goals.

Computer architecture can be classified into three main categories:

Instruction Set Architecture, or ISA, is the image of a computing system that is seen
by a machine language programmer. It includes the instruction set, word size, memory
address modes, processor registers, and address and data formats.
Computer Organization is a lower level and detailed description of the system that
involves how the different parts of the system are interconnected and how they
interoperate in order to implement the ISA.
System Design which includes all of the other hardware components within a computing
system such as:
o Computer buses and switches
o Memory controllers
o Direct Memory Access (DMA)
o Issues like multi-processing
Central Processing Unit
Central Processing Unit (CPU) performs all the arithmetic and logical calculations in a
computer. The CPU is said to be the brain of the computer system. It reads and executes
the program instructions, perform calculations and makes decisions. The CPU is
responsible for storing and retrieving information on disks and other media.

Figure: Meaning of CPU

The CPU consists of Control Unit, Arithmetic and Logic Unit (ALU) and register set.
Control Unit: The control unit issue control signals to perform specific operation and it
directs the entire computer system to carry out stored program instructions

Arithmetic and Logic Unit: The ALU is the core of any processor. It executes all
arithmetic operations (addition, subtraction, multiplication and division), logical
operations (compare numbers, letters, special characters etc.) and comparison operators
(equal to, less than, greater than etc.).
Register Set: Register set is used to store immediate data during the execution of
instruction. This area of processor consists of various registers.

COMPUTER ARCHITECTURE quick


notes(important fundamental concepts)

1.Define Computer Architecture


Computer Architecture Is Defined As The Functional Operation Of The Individual H/W
Unit In A Computer System And The Flow Of Information Among The Control Of
Those Units
2.Define Computer H/W
Computer H/W Is The Electronic Circuit And Electro Mechanical Equipment That
Constitutes The Computer
3. What Is Meant By Cache Memory ?
A Memory That Is Smaller And Faster Than Main Memory And That Is Interposed
Between The Cpu And Main Memory. The Cache Acts As A Buffer For Recently Used
Memory Location
4.what is locality of reference?
Many instruction in localized area of the program are executed repeatedly during some
time period and the remainder of the program is accessed relatively infrequently .this is
referred as locality of reference.
5.what is IO mapped input output?
A memory reference instruction activated the READ M (or)WRITE M control line and
does not affect the IO device. Separate IO instruction are required to activate the READ
IOand WRITE IO lines ,which cause a word to be transferred between the address aio
port and the CPU. The memory and IO address space are kept separate.
6.specify the three types of the DMA transfer techniques?
Single transfer mode(cyclestealing mode)
Block Transfer Mode(Brust Mode)
Demand Transfer Mode
Cascade Mode
7. why is memory refreshing circuit needed ?
al cells on the corresponding yow to be read and refreshed during both read and write
operation .the contents of the d ram are maintained each row of cell must be accessed
periodically once every 2 16 ms. refresh circuit usually performs this function .
automatically
8 what are the functions of control unit ?
the memory arithmetic and logic ,and input and output units store and process
information and perform i/p and o/p operation, the operation of these unit must be co
ordinate in some way this is the task of control unit the cu is effectively the nerve center
that sends the control signal to other units and sence their states.

9.What is an interrupt?
An interrupt is an event that causes the execution of one program to be suspended and
another program to be executed.
10.What are the uses of interrupts?
Recovery from errors
Debugging
Communication between programs
Use of interrupts in operating system
11.Define vectored interrupts.
In order to reduce the overhead involved in the polling process, a device requesting an
interrupt may identify itself directly to the CPU. Then, the CPU can immediately start
executing the corresponding interrupt-service routine. The term vectored interrupts refers
to all interrupt-handling schemes base on this approach.
12. What is the need for reduced instruction chip?
1. Relatively few instruction types and addressing modes.
2. Fixed and easily decoded instruction formats.
3. Fast single-cycle instruction execution.
4. Hardwired rather than microprogrammed control.
13. Name any three of the standard I/O interface.
1. SCSI (small computer system interface),bus standards
2. Back plane bus standards
3. IEEE 796 bus (multibus signals)
4. NUBUS
5. IEEE 488 bus standard
15.Explain the pipeline types.
1. Instruction pipeline
2. Arithmetic pipeline
16. Explain the various classifications of parallel structures.
1. SISD (single instruction stream single data stream
2. SIMD(single instruction stream multiple data stream
3. MIMD(multiple instruction stream multiple data stream
4. MISD(multiple instruction stream single data stream
17. What is absolute addressing mode?
The address of the location of the operand is given explicitly as a part of the instruction.
Eg. Move a , 2000
18. Specify three types of data transfer techniques.
1. Arithmetic data transfer
2. Logical data transfer
3. Programmed control data transfer
19. What is the role of MAR and MDR?
The MAR (memory address register) is used to hold the address of the location to or from
which data are to be transferred and the MDR(memory data register) contains the data to
be written into or read out of the addressed location.
20. What are the various types of operations required for instructions?
1. Data transfers between the main memory and the CPU registers
2. Arithmetic and logic operation on data

3. Program sequencing and control


4. I/O transfers
21. What is the role of IR and PC?
Instruction Register (IR) contains the instruction being executed. Its output is available to
the control circuits, which generate the timing signals for controlling the processing
circuits needed to execute the instructions. The Program Counter (PC) register keeps
track of the execution of the program. It contains the memory address of the instruction
currently being executed . During the execution of the current instruction, the contents of
the PC are updated to correspond to the address of the next instructions to be executed.
22.Define memory access time?
The time that elapses between the initiation of an operation and completion of that
operation ,for example ,the time between the READ and the MFC signals .This is
Referred to as memory access time.
23. Define memory cycle time.
The minimum time delay required between the initiations of two successive memory
operations, for example, the time between two successive READ operations.
24.Define Static Memories.
Memories that consist of circuits capable of retaining the state as long as power is applied
are known as static memories.
25.Distinguish Between Static RAM and Dynamic RAM?
Static RAM are fast, but they come at high cost because their cells require several
transistors. Less expensive RAM can be implemented if simpler cells are used. However
such cells do not retain their state indefinitely; Hence they are called Dynamic RAM.

You might also like