Scribd Logo
Upload

Welcome to Scribd!

  • 616 views

    Grilamid Tr90 Tds

    Uploaded by

    rumisethna9135
    Grilamid TR 90 is a transparent polyamide with good heat resistance, fatigue behavior, and dimensional stability. It exhibits low moisture absorption. Grilamid TR 90 was developed for use in filter bowls, eyeglass frames, toothbrushes, and optical fiber cables. It can also be used in applications requiring chemical resistance, transparency, and toughness. Because it contains no plasticizers and resists chemicals and perspiration, Grilamid TR 90 is suitable for sports eyewear and personal product frames.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Grilamid Tr90 Tds

    Uploaded by

    rumisethna9135
    616 views2 pages
    Grilamid TR 90 is a transparent polyamide with good heat resistance, fatigue behavior, and dimensional stability. It exhibits low moisture absorption. Grilamid TR 90 was developed for use in filter bowls, eyeglass frames, toothbrushes, and optical fiber cables. It can also be used in applications requiring chemical resistance, transparency, and toughness. Because it contains no plasticizers and resists chemicals and perspiration, Grilamid TR 90 is suitable for sports eyewear and personal product frames.

    Original Description:

    technical document

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Grilamid TR 90 is a transparent polyamide with good heat resistance, fatigue behavior, and dimensional stability. It exhibits low moisture absorption. Grilamid TR 90 was developed for use in filter bowls, eyeglass frames, toothbrushes, and optical fiber cables. It can also be used in applications requiring chemical resistance, transparency, and toughness. Because it contains no plasticizers and resists chemicals and perspiration, Grilamid TR 90 is suitable for sports eyewear and personal product frames.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    616 views2 pages

    Grilamid Tr90 Tds

    Uploaded by

    rumisethna9135
    Grilamid TR 90 is a transparent polyamide with good heat resistance, fatigue behavior, and dimensional stability. It exhibits low moisture absorption. Grilamid TR 90 was developed for use in filter bowls, eyeglass frames, toothbrushes, and optical fiber cables. It can also be used in applications requiring chemical resistance, transparency, and toughness. Because it contains no plasticizers and resists chemicals and perspiration, Grilamid TR 90 is suitable for sports eyewear and personal product frames.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Product Data Bulletin

    Grilamid TR 90
    Grilamid TR 90 is a transparent polyamide with
    good heat resistance and excellent fatigue
    behavior.
    Grilamid TR 90 also exhibits low
    moisture absorption and dimensional stability.
    Grilamid TR 90 was developed for use in filter
    bowls, eye glass frames, tooth brushes and
    optical fiber containing cables. It may also be
    considered for a variety of consumer and
    industrial applications in which chemical
    resistance, transparency and toughness are
    desired.
    Because Grilamid TR 90 contains no plasticiser
    and resists cosmetic chemicals and perspiration, it
    can enhance the design and performance of
    personal products such as sport and safety
    spectacle frames. Grilamid TR 90 is NSF
    Standard 61 Listed.

    Processing
    Grilamid TR 90 is supplied ready for processing
    in free-flowing pellet form, pre-dried to 0.1%
    moisture and packaged in multiwall, foil-lined,

    moisture-proof bags containing 25 kg net. For


    optimum processing and parts quality, the resin
    should be protected from exposure to a humid
    environment prior to processing. If hopper residence times are likely to exceed two hours, use of
    a hopper dryer operating at 176F/80C is
    recommended.
    If the material is otherwise exposed to a humid
    environment for more than two hours, drying is
    recommended to ensure that the moisture content
    does not exceed 0.1% for processing. Use of a
    vacuum dryer operating at 230F/110C for 3-4
    hours is strongly recommended. A desiccant
    dryer may also be used, but to avoid oxidation of
    the material and consequent discoloration, temperatures should be held below 176F/80C, with
    drying times between six and ten hours. For
    longer periods, overnight for example, desiccant
    drying is acceptable at temperatures not
    exceeding 158F/ 70C.

    Processing Guidelines
    Injection Molding
    Melt Temperatures
    1-2-3
    Mold Temperatures
    Injection Speed
    Injection Pressure

    Extrusion
    F
    C
    F
    C

    520 - 535
    270 - 280
    176
    80
    Medium
    High

    Barrel Temperatures F
    C
    Clamp Temperature F
    C
    Die Temperatures
    F
    1-2-3
    C

    482-500-500
    250-260-260
    500
    260
    500-500-500
    260-260-260

    Cooling the feed zone at the hopper is recommended.

    EMS-CHEMIE (North America) Inc.


    2060 Corporate Way, P.O. Box 1717
    Sumter, SC 29151, USA
    Phone 803-481-6171, Fax 803-481-6121
    www.emschem.com, [email protected]
    1 of 2

    Preliminary Property Data: Grilamid TR 90


    General Properties
    Glass Transition Temperature
    Specific Gravity
    Moisture Absorption
    24hr Immersion
    73F/23C/50%RH in air
    73F/23C in water
    Linear Mold Shrinkage (F/T)
    Mold Shrinkage
    Perpendicular
    Parallel
    Refractive Index
    Light Transmission
    Thermal Properties
    Heat Deflection Temperature
    66 psi (455 Kpa)
    264 psi (1820 Kpa)
    Coefficient of Linear
    Thermal Expansion

    DSC
    ASTM D792
    ASTM D570

    EMS
    ASTM D955

    ASTM D648

    F/C

    EMS
    EMS
    EMS

    311 / 155
    1.01
    0.40
    1.50
    3.30
    0.65 / 0.80

    %
    in/in

    DIN 53491
    ASTM D1003

    DIN 53752

    Thermal Conductivity @ 68F/20C


    Heat Capacity @ 68F/20C
    Maximum Usage Temperatures
    Long Term in Air
    Short Term in Air

    F/ C
    --%

    0.010
    0.010
    1.510
    92

    260 / 127
    235 / 113
    4X10-6
    9X10-6

    in/in F
    cm/cm
    C
    W/m/C
    J/g C
    F/ C

    0.16
    1.80
    176/80
    212 / 100

    Mechanical Properties
    Tensile Strength
    Elongation at Yield/Break
    Flexural Modulus
    Flexural Strength
    Notched Izod Impact Strength
    Hardness

    ASTM D638
    ASTM D638
    ASTM D790
    ASTM D790
    ASTM D256
    Shore

    psi (MPa)
    %
    psi (MPa)
    psi (MPa)
    ft-lb/in (J/m)
    D-scale

    Electrical Properties
    Volume resistivity
    Dielectric strength
    Dielectric Constant @ 100 HZ
    Dielectric Factor @ 100 HZ
    Comparative Tracking Resistance

    DIN 53481
    DIN 53481
    IEC 250
    IEC 250
    DIN 53480

    - cm
    kV/in (kV/mm)
    Volts

    Dry-As-Molded
    7,800 (54)
    10 / 150
    222,000 (1,530)
    12,600 (87)
    1.0 ( 50)
    84

    600+

    Conditioned
    8,300 (57)
    10 / 150
    229,000 (1,580)
    11,900 (82)
    2.0 ( 100)
    84
    1012
    864 (34)
    2.80
    0.0011
    600+
    December 13, 2000

    This Technical Data Sheet is presented in good faith, based on currently available information, and is accurate to the best of our knowledge.
    It does not replace the precautions, directions and information contained on the product label. The user is solely responsible for: 1)
    following all instructions, recommendations and directions; 2) deciding whether this product or the information about this product is
    suitable for its use; 3) providing all information about this product to any subsequent users; 4) meeting all applicable health and safety
    standards and regulations; and 5) ensuring that no patent infringement occurs.
    NO LIABILITY IS ASSUMED AND NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, ARE MADE WITH RESPECT
    TO THE INFORMATION OR THE PRODUCT TO WHICH THE INFORMATION REFERS.
    Grilamid7, Grivory7, and Grilon7 are registered trademarks of EMS-CHEMIE.

    2 of 2

    You might also like