Scribd
Upload
251 views1 page

API 510 Data Sheets - Quizlet

This document lists 22 data points related to API 510 dimensions and requirements for pressure vessel inspection and repair. Key requirements include preheat being maintained 4 inches or 4 times the thickness beyond a weld; plate thickness tolerance being the lesser of 0.010 inches or 6% of the thickness; and cracks, incomplete penetration, or fusion not being allowed on new welds. Wall thicknesses over 1.5 inches require post-weld heat treatment and full radiographic testing.

Uploaded by

ads_1203
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
251 views1 page

API 510 Data Sheets - Quizlet

This document lists 22 data points related to API 510 dimensions and requirements for pressure vessel inspection and repair. Key requirements include preheat being maintained 4 inches or 4 times the thickness beyond a weld; plate thickness tolerance being the lesser of 0.010 inches or 6% of the thickness; and cracks, incomplete penetration, or fusion not being allowed on new welds. Wall thicknesses over 1.5 inches require post-weld heat treatment and full radiographic testing.

Uploaded by

ads_1203
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

API 510 Data Sheets (Dimensions)

Study online at quizlet.com/_sqvdj


1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.
12.

13.

14.
15.

16.

17.
18.

19.

20.

21.

Distance beyond weld that preheat must


be maintained when performing preheat
in lieu of PWHT?

Greater of:
4" or 4T

Maximum allowed mil tolerance of a


plate?

Lesser:
0.010" or
6% of T"

Maximum allowed size of open


discontinuity in a bend test?

1/8"

Maximum area of pits allowed in an 8"


circle?

7 in. squared

Maximum distance beyond the area to be


examined to clean a part when
performing a MT examination?

1"

Maximum distance beyond the area to be


examined to clean a part when
performing a PT examination?

1"

Maximum distance on weld between


welder's stamp?

3'

Maximum length of crack, incomplete


penetration, or incomplete fusion allowed
on a new weld?

0"

Maximum length of pits allowed in 8"


line?

2"

Maximum length of weld represented by 1


Spot RT?

50'

Minimum allowed wall thickness at a pit?

1/2 t-min

Minimum length of RT when qualifying a


welding operator with RT of first
production weld?

3'

Minimum length of RT/UT when


qualifying a welding operator with a test
coupon?

6"

Minimum length of spot RT?

6"

Minimum length to RT/UT when


qualifying a welder with test coupon or 1st
production weld?

6"

Minimum overlap for PWHT when using


multiple heats?

5'

Minimum radius of insert patch?

1"

NDE - minimum distance of eye-to-part to


count as a visual exam?

6-24"

Smoothness of relief devices seating


surfaces?

3 light
beads/bands

Vessel inside diameters that are excluded


from the scope of Section VIII?

< 6"

Wall thickness of CS shell that requires


PWHT?

> 1 1/2"

22.

Wall thickness of shell that requires Full RT?

> 1 1/2"

You might also like