EZTL

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

NONEL EZTL

Nonelectric Trunkline Delay Detonators

Technical
Information
Properties

MSDS
#1122

Net Explosive Content per 100 units


Delay Time
(msec)

Product Description
NONEL nonelectric delay detonator EZTL units consist of a length of yellow shock
tube, with a surface detonator attached to one end and the other end sealed. The
detonator is housed in a plastic EZ Connector block which facilitates easy connection
to shock tube. A white J-hook is affixed near the sealed end. Easy-to-read, colorcoded delay tags display the delay number and nominal firing time prominently.
EZTL detonators are designed for use with NONEL MS and EZ DET units to provide
effective and accurate surface timing between blastholes and/or rows of blastholes in
surface and underground blasting designs.
Application Recommendations
For detailed application recommendations, ALWAYS request a copy of Dyno Nobels
Product Manual: NONEL and PRIMACORD from your Dyno Nobel representative.
ALWAYS be sure that the shock tube(s) are securely inserted, one at a time, into the
plastic EZ connector. The head of the connector block should rise to accept the tube,
and return to a closed position with an audible click.
ALWAYS ensure that the individual shock tubes remain aligned side by side in the
EZ connector channel and do not cross over one another during insertion.
ALWAYS protect the plastic EZ connector and all shock tube leads from impact or

I-29-03-15-13
See Product Disclaimer on page 2.

0.0240 kg
0.0529 lbs

Connector Block Color

Green

17

Yellow

25

Red

33

Green

42

White

67

Blue

100

Black

109

Black

Hazardous Shipping Description



Detonator assemblies nonelectric,

1.4B, UN 0361 PG II

NONEL EZTL

Application Recommendations (continued)


damage. Use care when placing blasting mats and cover material on top of the
blasting circuit. The EZ connector contains a detonator and is subject to detonation
caused by abuse such as impact. Shock tube which has been cut, ruptured or
damaged may cause misfires.
NEVER use NONEL EZTL detonators with detonating cord. The low strength surface
detonator will not initiate detonating cord.
NEVER attempt to disassemble the delay detonator from the EZ connector block or
use the detonator without the connector.
NEVER place more than 6 shock tube leads into an EZ connector block. Misfires
may result.
NEVER tie-in NONEL EZTL units until all holes have been primed, loaded, stemmed
and the blast site has been cleared.
Transportation, Storage and Handling
NONEL EZTL must be transported, stored, handled and used in conformity with all
federal, state, provincial and local laws and regulations.
For maximum shelf life (3 years), NONEL EZTL must be stored in a cool, dry, well
ventilated magazine. Explosive inventory should be rotated. Avoid using new
materials before the old. For recommended good practices in transporting, storing,
handling and using this product, see the booklet Prevention of Accidents in the Use
of Explosive Materials packed inside each case and the Safety Library Publications
of the Institute of Makers of Explosives.

Technical
Information
Packaging
Length

Case Type

Quantity / Case

10

D*

90

3.5

12

D*

90

20

D*

75

30

D*

60

12

40

D*

50

15

50

D*

45

18

60

D*

35

ft

2.5

Length rounded to nearest one-half meter.


Case weight varies by length & delay; see case label for exact weight.
* Always shipped with 2 cases strapped together. Case dimension width doubles.

Case Dimensions

Detpak (D)

44 x 22 x 25 cm 17 x 8 x 10 in

Product Disclaimer Dyno Nobel Inc. and its subsidiaries disclaim any warranties with respect to this product, the safety or suitability thereof, or the results to be obtained, whether express or
implied, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND/OR OTHER WARRANTY. Buyers and users
assume all risk, responsibility and liability whatsoever from any and all injuries (including death), losses, or damages to persons or property arising from the use of this product. Under no circumstances
shall Dyno Nobel Inc. or any of its subsidiaries be liable for special, consequential or incidental damages or for anticipated loss of profits.

Dyno Nobel Inc.

2795 East Cottonwood Parkway, Suite 500, Salt Lake City, Utah 84121 USA
Phone 800-732-7534
Fax 801-328-6452
Web www.dynonobel.com

You might also like