Atlas Copco ROC D5

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Atlas Copco ROC D5

Versatility and power with excellent rough terrain manoeuvrability


Hole range: 35 89 mm

Coverage area

Technical data for ROC D5

3
4

4
5

Recommended hole range:


T 38, T 45, R 32
Hole depth

138"-312"
92'

Vertical feed, coverage area 15 m2

Vertical reach
35 - 89 mm
approx. 28 m

Single boom

Single boom -00, -10

Folding boom

Folding boom - 01, -11

Engine
Deutz, water-cooled diesel engine, BF4M 1013EC
Rated power at 2200 rev/min 104 kW
15 HP

20 HP
3335 psi
515 lbf/ft

6
5
4
3
2
1

5
4

3
2

Horizontal coverage area

-01, -11

-00, -10

1
2

125 psi
180 cfm

Forward drilling

Forward drilling with inclination

Compressor
Atlas Copco C106 screw compressor
Working pressure, max.
8.5 bar
Free air delivery (FAD)
85 l/s

11

16

Boom variants
-00, single boom without cab
-01, folding boom without cab
-04, single boom with off set boom head, without cab
-10, single boom with cab
-11, folding boom with cab
-14, single boom with off set boom head, with cab

8
0
5

15 kW
250 bar
700 Nm
150 kg

Diesel tank
Capacity

280 l

73 US gal.

Feed
Feed length, total
Effective feed length
Feed extension
Feed speed, max.
Feed force, max.
Coverage

7 140 mm
4 240 mm
1 400 mm
0.92 m/s
20 kN
15 m2

Tramming
Tramming speed, max.
Tractive force
Hill climbing ability
Track oscillation
Ground clearance

3.6 km/h
2.2 mph
95 kN
21.280 lbf
20 (30 with winch)
12
455 mm
1712"

Transport dimensions
Total weight exclusive of optional equipment,
approx. 11 700 kg
Cab version
12 600 kg
Width
2 370 mm
Length
11 000 mm
Height
3 100 mm

24
15
43"
180 ft/min
4400 lbf

25.700 lb
27.700 lb
710''
433"
102"

Standard equipment
Operators cab, ROPS and FOPS
approved
RHS mechanised rod handling for 28 m
(92) of rods
Double drill-steel support
Fuel saving device
Toe-hole drilling kit (standard with RHS
system)
Two-speed traction motors
Dust collector
Feed extension
Air-flow control switch
Anti-jamming system
Valves for reduced percussion and air
pressures for collaring
Retractable dust hood
Heavy duty tracks
Hydraulic rear support leg
Work lights

Hydraulic rock drill


COP 1238ME or LP
Impact power, max.
Hydraulic pressure, max.
Rotational torque, max.
Weight, approx.

Optional equipment
Swing-arm for drilling controls, 00-01
+ 90 mounted feed
Pre-separator
Thread greasing device with brushes
Thread greasing device (ECG)
Hydraulic winch
Coupling sleeve retainer
Engine pre-heater
Central lubricating system
Mechanical inclination instrument
Electric re-fuelling pump
Water-mist system
Extractor for rock drill
Biological degradeable hydraulic oil
Cab version
Air conditioner/heater
Cabin heating
Heated operator's seat
Tinted windows
Laminated windows
Electronic hole inclination instrument
Electronic hole depth instrument

Total Rock Drilling Technology


Illustrations in this brochure may show equipment with optional extras.
Specfication and equipment subjects to change without notice.
Consult your Atlas Copco sales company for specific information

You might also like