Yang
Yang
Yang
Authors:
Institution:
Address:
Telephone:
Fax:
E-mail:
Grant No.:
Period of
Performance: October 1, 1998 - August 31, 2001
OBJECTIVE
The separation of air for the production of oxygen is an important operation in the
chemical processing industry as well as for energy conversion processes. This separation
has been done predominately by cryogenic distillation; though, as adsorption systems have
become more efficient and new, more effective sorbents have been synthesized, separation
by adsorption processes (e.g., pressure swing adsorption (PSA), and vacuum swing
adsorption (VSA)) have become increasingly competitive and are already favorable for
small-to-medium scale operations. Currently, approximately 20% of air separations are
accomplished using adsorption technologies. In this program we are synthesizing and
characterizing new materials to be used in this important gas separation. Further, the
structures of new zeolites and Co-Complexes immobilized on nanoporous materials and
fundamental questions concerning adsorption of gases in these new sorbents are
addressed.
ACCOMPLISHMENTS TO DATE
Before the past year, we synthesized mixed Li,Ag ion-exchanged zeolites and treated
these materials in ways that promote the formation of intracrystalline silver clusters.
Using these new zeolites for air separation by standard pressure swing adsorption (PSA),
it was determined that the oxygen productivity was increased by 12% when compared
with the best sorbents in industry, Li-LSX zeolite. These samples were also structurally
characterized using Rietveld refinement of neutron powder diffraction data. Structural
characterization revealed the presence of cations in a novel site II* in mixed Li,Ag-LSX
zeolites that were vacuum dehydrated at 450C. Cations in this site II* are more
interactive with the atmospheric sorbates of interest than silver at the conventional site II
location. Vacuum dehydration at 450C induced thermal migration of Ag+ from site II to
site II* and gives rise to the superior properties for air separation.
During the past year, we focused on the synthesis of oxygen selective sorbents. The
inherent advantage for using oxygen-selective sorbent for air separation is that much less
work is to be done for the same separation as comapred with using nitrogen selective
sorbents, since air conatins mush less oxygen. Following our original plan, cobalt (II)
bis(3-fluoro-salicylaldehyde) ethylenediamine (Co(fluomine)), an organometallic
complex of known oxygen-binding capacity, has been synthesized in such a way as to
anchor this material on the anion sites of selected nanoporous substrates. The O2 and N2
binding capacities of the resulting bulk materials were then characterized. The resulting
O2 sorption isotherms of these materials were more reversible than those of the free
material. They also exhibit the positive slope with oxygen pressure that is desirable for
PSA applications. X-ray photoemission spectroscopy (XPS) analysis indicated a
difference in the electronic nature of the cobalt atoms present in the free Co(fluomine) as
compared to those of the material immobilized on the surface of type X zeolite,
indicating possible coordination of Co(II) at the axial position by zeolitic framework
oxygen. Stability testing of these materials, however, did not seem to result in increased
stability over that observed in the free Co(fluomine).
A number of related and important issues in PSA air separation have also been addressed,
such as the use of molecular sieve carbon as the sorbent, criterion for sorbent selection
for PSA, and diffusion rates of nitrogen/oxygen in zeolites.
In the remaining months, we plan to evaluate the best sorbents for air separation
specifically for producing oxygen or enriched oxygen for fossil energy applications.
SIGNIFICANCE TO FOSSIL ENERGY PROGRAMS
Advanced and efficient coal conversion and power generation systems require an
inexpensive source of oxygen. Pressure swing adsorption is a commercially proven
technology that can generate oxygen at a wide range of concentrations at low costs. In
this work, we aim at developing the best sorbents for air separation by pressure swing
adsorption. The best sorbent developed in this program is the Ag-Li mixed cation X
zeolites. PSA using these sorbents will yield 12% higher sorbent productivity than the
best zeolite sorbent that is used in industry today.