BVA Hydraulics Catalog

Industrial Hydraulic Equipment Built To Last
TABLE OF CONTENTS
Cylinders 3-17 Maintenance Kits 29

Single Acting Cylinders 3-5 Shop Presses & Accessories 30
High Tonnage Single Acting Cylinders 6 Jacks 31-32
Double Acting Cylinders 7 Manual Bottle Jacks 31
High Tonnage Double Acting Cylinders (HDG Series) 8 Air / Manual Bottle Jacks 31
High Tonnage Double Acting Cylinders (HD Series) 9 Toe Jacks 31
Precision Double Acting Cylinders 10 Mini Jacks 32
Low Profile Cylinder Kit 10 Hydraulic Bench Vise 32
Low Profile Cylinders 11 Accessories 33-40
Flat Body Cylinders 12 Cylinder Saddles 33
Flat Body Cylinder Kits 12 Clevis Eyes 33
Aluminum Cylinders 13 Pressure Gauges 34
Hollow Hole Cylinders 14 Gauge Adapter 34
Lock Nut Cylinders 15 Plates for Aluminum Cylinders 34
Threaded Cylinders 16 Bases 34
Pull Cylinders 16 Hydraulic Hoses 34
Spreaders / Bead Breaker 17 Hydraulic Oil 34
Pumps 18-28 Manifolds 35
Metal Air Pumps 18 Pressure Switch 35
Remote Control Air Pumps 19 Pump Mounted Manifold Block 35
Double Acting Air Pump 19 Pressure Compensating Flow Control Valve 35
All Position Air Pumps 20 Pump Mounted Valves 36
Rotary Air Pumps 20 Solenoid Valve 36
Single Speed Metal Hand Pumps 21 Hydraulic Couplers 37
Two Speed Aluminum Hand Pumps 21 Flow Control Valves 37
Two Speed Metal Hand Pumps 22 Remote Mounted Directional Control Valves 38
Double Acting Hand Pumps 23 Fittings 39
Low Pressure Hand Pumps 23 BVA Cross Reference Chart 40-41
Pump / Cylinder Combo 24 Basic System Set Ups 42
Electric Pumps 25 Warranty 43
Electric Pumps with Pendant Switch 26
Electric Pumps with Solenoid Valves 27 © Copyright 2009
SFA Company
Electric Pump with Auto Return Valve 28 All rights reserved. Any copying or other use of
material in this catalog (text, illustrations, drawing, photos)
Gas Engine Pump 28 without express written consent is prohibited.
Built To Last
Information in this catalog is subject to change without prior notice
2 1-888-332-6419
Industrial Hydraulic Equipment
SINGLE ACTING CYLINDERS

• 41 Models
• Rod wiper seals out dirt and contamination
• Collar fixture threads
• Two base mounting holes on most models
• High strength steel construction from gun drilled solid bar
• Collar thread protector
• One piece high grade alloy bearing for side load
protection and long life
• Polyurethane cup seal provides for optimum
performance
• Industrial hard chrome plated ram helps prevent rust
and corrosion
• Solid steel cylinder body
• Heavy duty return spring provides quicker retraction
• Ideal for lifting and pressing
• Maximum working pressure: 10,000 psi / 700 bar
• All cylinders* come with ⅜ ″NPTF High flow couplers
(CH38F) except H0203 Y
G
X D2
3/8" - 18NPTF D1
K H
E *H0500 only
F J E C Y 3/8" - 18NPTF
B
L
Z A
X
A G
B D
The Difference
C
Heavy duty, heat treated, grooved

saddle provides better surface traction
during operation Steel stop ring for ram over
travel protection
Collar fixture threads

Rod wiper seals out dirt and contamination
Cylinders are burnish rolled for a smooth

precision mirror finish, which reduces scoring
and prolongs seal life
Industrial hard chrome plated ram
prevents scratching and corrosion
One piece steel ram stopper for extra strength

and prevents over travel
One piece high grade alloy bearing

for side load protection and long life
Polyurethane cup seal provides optimum
performance
High flow ball
Rectangular return spring design results in even coupler provides more flow
distribution of the load, eliminating spring than conventional couplers
breakage and creating quicker retraction
• Limited Lifetime Warranty

• All Cylinders Are Tested To Meet Industrial Standards
www.bvahydraulics.com 3
Internal Cylinder
Cylinder Collapsed Extended Outside Plunger Saddle
Cylinder Pressure Oil Bore
Stroke Model Effective Height Height Diameter Diameter Diameter
Capacity at Capacity Diameter
(in) Number Area A B D E F
(tons) Capacity (in³) C
(in²) (in) (in) (in) (in) (in)
(psi) (in)
2 3.07 H0203 0.76 10,000 2.28 5.39 8.46 6.26 1.31 0.87 1.00
0.63 H0500 1.10 9,091 0.69 1.61 2.24 1.18 2.36 x 1.58 0.98 -
1.00 H0501 1.00 4.58 5.58
3.07 H0503 3.07 6.65 9.72
5
5.08 H0505 1.00 10,000 5.08 8.70 13.78 1.13 1.50 1.00 0.98
7.09 H0507 7.09 10.71 17.80
9.09 H0509 9.09 12.72 21.81
1.00 H1001 2.24 3.62 4.62 -
2.01 H1002 4.50 4.84 6.85
4.02 H1004 9.00 6.85 10.87
5.94 H1006 13.31 9.84 15.78
10 2.24 8,928 1.69 2.26 1.49
7.95 H1008 17.81 11.85 19.80 1.38
9.96 H1010 22.31 13.86 23.82
11.97 H1012 26.81 15.87 27.84
14.02 H1014 31.40 17.72 31.74
0.99 H1501 3.11 4.88 5.87
2.01 H1502 6.31 5.87 7.88
3.98 H1504 12.50 7.87 11.85
5.87 H1506 18.43 10.67 16.54
15 3.14 9,554 2.00 2.75 1.63 1.50
7.87 H1508 24.71 12.68 20.55
9.88 H1510 31.02 14.69 24.57
12.01 H1512 37.71 16.65 28.66
14.02 H1514 44.02 18.66 32.68
1.00 H2501 5.14 5.38 6.38
2.01 H2502 10.33 6.82 8.83
3.94 H2504 20.25 8.78 12.72
5.94 H2506 30.53 10.79 16.73
25 5.14 9,728 2.56 3.35 2.24 1.97
7.95 H2508 40.86 12.80 20.75
9.96 H2510 51.19 14.80 24.76
12.24 H2512 62.91 16.73 28.97
14.25 H2514 73.25 18.74 32.99
30 8.27 H3008 6.49 9,245 53.67 15.24 23.51 2.87 4.00 2.24 2.13
2.01 H5502 22.09 6.93 8.94
3.98 H5504 43.74 8.94 12.92
55 10.99 10,009 3.74 5.00 3.15 2.76
6.22 H5506 68.36 11.14 17.36
13.27 H5513 145.84 18.15 31.42
6.14 H7506 98.85 11.22 17.36
75 16.10 9,317 4.53 5.79 3.74 2.76
13.11 H7513 211.07 19.37 32.48
2.01 H10002A 41.34 8.62 10.63 6.25
100 6.61 H10006 20.57 9,723 135.97 14.06 20.67 5.12 4.13 2.76
6.97
10.24 H10010 210.64 17.68 27.92

4 1-888-332-6419
Collar Plunger Plunger Base Mounting Hole

Base to Collar
Thread Internal Thread Bolt Thread
Inlet Port Thread Thread Weight Model
Length Thread Length Circle Depth
G H Y (lbs) Number
L J K X Z
(in) (in) (in)
(in) (in) (in) (in) (in)
0.46 1¼˝-16 0.54 - - - 2.0 H0203
0.75 - - - - 1.10 0.2 - 2.9 H0500
3.1 H0501
3.5 H0503
0.79 1½˝-16 1.10 ¾˝-16UNF 0.63 1.00 ¼˝-20UNC 0.55 4.4 H0505
4.9 H0507
5.7 H0509
10-24UNC 0.24 5/16˝-18UNC 4.0 H1001
5.1 H1002
6.8 H1004
9.5 H1006
0.77 2¼˝-14 1.30 1.56 0.55
1˝-8UNC 0.79 5/16˝-18UNC 11.9 H1008
14.1 H1010
15.0 H1012
16.6 H1014
7.3 H1501
8.6 H1502
11.2 H1504
15.4 H1506
0.98 2¾˝-16 1.18 1˝-8UNC 0.98 1.88 ⅜˝-16UNC 0.51
17.6 H1508
20.5 H1510
23.1 H1512
28.2 H1514
13.4 H2501
14.6 H2502
19.2 H2504
23.2 H2506
0.98 3-5/16˝-12 1.93 1½˝-16 1.18 2.31 ½˝-13UNC 0.75
27.1 H2508
30.9 H2510
33.7 H2512
37.7 H2514
1.97 3-5/16˝-12 1.93 1½˝-16 1.18 - 40.8 H3008
34.2 H5502
42.5 H5504
1.22 5˝-12 2.17 - 3.75 ½˝-13UNC 0.75
57.5 H5506
86.9 H5513
73.2 H7506
1.18 5¾˝ - 12 1.73 -
121.3 H7513
6¼″-12 2.24 - 69.4 H10002A
1.57 121.3 H10006
6⅞″-12 1.73 - 5.50 ¾″-10UNC 1
157.3 H10010

HIGH TONNAGE
• Cylinders are burnish rolled for a smooth
precision mirror finish.
• Base mounting holes on most models
• High strength steel construction from gun drilled
solid bar
• High flow ⅜″ NPTF couplers
• Polyurethane cup seal provides for optimum performance
• Industrial hard chrome plated ram helps prevent rust
and corrosion
• Solid steel cylinder body provides strength for high
tonnage applications
* Note: BVA will build any cylinder to

customers exact requirements.
A B
3/8"-18NPTF
C
G
Z
X
D
Internal Cylinder
Cylinder Collapsed Extended Outside
Stroke Model Effective Height Height Diameter
(in) Number Area A B D
(in²) (in) (in) (in)
(psi) (in)
150 5.91 HG15006 30.78 10,000 182.00 11.65 17.56 6.26 8.07
5.91 HG20006 41.22 10,000 244.00 12.44 18.35 7.24 9.25
200
7.87 HG20008 41.22 10,000 324.00 14.41 22.28 7.24 9.25
500 5.91 HG50006 113.25 10,000 669.00 20.43 26.34 12.01 15.75
1000 11.81 HG100012 227.19 10,000 2,683 .00 32.05 43.86 17.01 22.05
Base Mounting Hole

Plunger Saddle Base to Inlet
Diameter Diameter Port Thread Weight Model
Bolt Circle Thread
E F G Depth (lbs) Number
X Y
(in) (in) (in) Z
(in) (in)
(in)
4.49 3.70 2.40 5.12 M12 0.87 143.0 HG15006
5.24 4.45 2.62 6.50 M12 0.87 201.0 HG20006
5.24 4.45 2.62 6.50 M12 0.87 221.0 HG20008
9.76 8.98 4.49 9.84 M24 1.50 1,058.0 HG50006
13.50 12.72 6.85 14.76 M24 1.50 3,172.0 HG100012
6 1-888-332-6419
DOUBLE ACTING
CYLINDERS
• One piece high grade alloy bearing for side load protection
and long life
• Ideal for pushing and pulling
• Retract under hydraulic power for faster operation
Maximum
Cylinder Collapsed Extended Cylinder Outside
Cylinder Cylinder Oil Capacity
Stroke Model Effective Area Height Height Bore Dia. Dia.
Capacity Capacity
(in) Number A B C D
(tons) Push Pull Push Pull Push Pull (in) (in) (in) (in)
(ton) (ton) (in²) (in²) (in³) (in)
10.04 HD1010 22.41 7.47 16.14 26.18
10 11.40 3.80 2.23 0.74 1.69 2.87
11.97 HD1012 26.71 8.90 18.03 30.00
8.15 HD3008 52.93 26.02 15.31 23.46
30 32.90 16.20 6.49 3.19 2.87 3.98
14.49 HD3014 94.09 46.26 21.65 36.14
6.18 HD5506 67.93 19.74 13.03 19.21
55 13.19 HD5513 55.70 16.20 10.99 3.19 144.94 42.11 20.04 33.23 3.74 5.00
20.12 HD5520 221.09 64.24 28.86 49.98
6.10 HD7506 98.10 31.21 13.70 19.80
75 81.70 25.90 16.09 5.12 4.53 5.75
13.11 HD7513 210.93 67.06 20.71 33.82
6.57 HD10006 135.23 62.98 14.06 20.63
100 13.11 HD10013 104.40 48.60 20.57 9.58 269.66 125.58 20.63 33.74 5.12 6.97
18.15 HD10018 373.31 173.86 27.05 45.20
Base to Top to Plunger Plunger Collar Base Mounting Hole

Plunger Saddle
Adv. Return Internal Thread Collar Thread Thread Bolt Thread
Model Dia. Dia. Thread Weight
Port Port Thread Length L Length Circle Depth
Number E F Y (lbs)
G H J K (in) M X Z
(in) (in) (in)
(in) (in) (in) (in) (in) (in) (in)
HD1010 26.7
1.37 1.38 1.42 2.09 1˝-8 0.98 2¼˝-14 1.02 -
HD1012 30.0
HD3008 43.0
2.13 1.97 1.65 2.91 1½˝-16 0.98 3-5/16˝-12 1.93 -
HD3014 60.6
HD5506 70.5
1.14
HD5513 3.14 2.76 2.87 1˝-12 0.98 5˝-12 1.73 - 104.0
HD5520 2.48 146.2
HD7506 93.7
3.75 2.76 1.18 2.80 1˝-12 1.50 5¾˝-12 1.50 -
HD7513 136.8
HD10006 138.6
1.22
HD10013 3.75 2.95 2.95 1¾˝-12 1.38 6⅞˝-12 1.97 5.47 ¾˝ -10 0.98 193.6
HD10018 1.50 248.3
HIGH TONNAGE
DOUBLE ACTING CYLINDERS (HDG Series)
• Cylinders are burnished rolled for a smooth precision
mirror finish.
• Industrial hard chrome plated ram prevents
scratching and corrosion
• Base mounting holes standard on all models
• High strength steel construction from gun drilled
solid bar
Maximum
Stroke Effective Area Height Height Bore Dia. Dia.
Capacity Model Number Capacity
(in) A B C D
150 5.91 HDG15006 153.90 75.00 30.78 14.96 181.75 88.32 11.65 17.56 6.26 8.07
5.91 HDG20006 206.10 98.00 41.22 19.68 243.40 116.23 12.44 18.35 7.24 9.25
200
11.81 HDG20012 206.10 98.00 41.22 19.68 486.79 232.46 18.35 30.16 7.24 9.25
300 5.91 HDG30006 353.60 117.00 70.71 23.46 417.56 138.55 16.22 22.13 9.49 12.20
400 11.81 HDG40012 433.90 150.00 86.79 29.99 1025.00 354.18 24.59 36.40 10.51 13.78
500 5.91 HDG50006 566.30 192.00 113.25 38.37 668.77 226.61 20.43 26.34 12.01 15.75
Base to Top to Base Mounting Hole

Plunger Saddle
Adv. Return Bolt Thread
Model Dia. Dia. Thread Weight
Port Port Circle Depth
Number E F Y (lbs)
G H X Z
(in) (in) (in)
(in) (in) (in) (in)
HDG15006 4.49 3.70 2.40 2.22 5.12 M12 0.87 143
HDG20006 5.24 4.45 2.62 2.22 6.50 M12 0.87 201
HDG20012 5.24 4.45 2.62 2.22 6.50 M12 0.87 322
HDG30006 7.76 6.97 3.98 2.95 7.09 M16 1.42 511
HDG40012 8.50 7.72 4.49 4.13 8.07 M16 1.42 928
HDG50006 9.76 8.98 4.49 5.31 9.84 M24 1.50 1,058
8 1-888-332-6419
HIGH TONNAGE
DOUBLE ACTING CYLINDERS (HD Series)
and long life
Maximum
Stroke Effective Area Height Height Bore Dia. Dia.
Capacity Model Number Capacity
(in) A B C D
6.00 HD20006 221.00 112.50 44.21 22.50 265.28 135.00 16.94 22.94 7.50 9.75
200 13.00 HD20013 221.00 112.50 44.21 22.50 574.78 293.00 23.94 36.94 7.50 9.75
24.00 HD20024 221.00 112.50 44.21 22.50 1061.00 528.00 36.13 60.13 7.50 9.75
300 6.00 HD30006 354.60 190.00 70.93 38.00 425.56 228.00 19.13 25.13 9.50 12.25
500 6.00 HD50006 565.70 315.00 113.15 63.00 678.92 378.00 22.75 28.75 12.00 15.63
Base to Top to Collar Plunger Plunger Base Mounting Hole

Plunger Saddle Collar
Adv. Return Thread Internal Thread Bolt Thread
Model Dia. Dia. Thread Thread Weight
Port Port Length Thread Length Circle Depth
Number E F L Y (lbs)
G H M J K X Z
(in) (in) (in) (in)
(in) (in) (in) (in) (in) (in) (in)
HD20006 5.25 5.25 2.25 3.81 - - - - 5.00 1-8 1.00 325.00
HD20013 5.25 5.25 2.25 3.81 9¾-12 2.13 2½-12 2.50 5.00 1-8 1.00 440.00
HD20024 5.25 5.25 3.38 4.00 9¾-12 2.13 2½-12 2.50 5.00 1-8 1.00 616.00
HD30006 6.50 6.50 3.50 4.50 12¼-12 2.31 2½-12 3.25 6.25 1¼-7 1.75 441.00
HD50006 8.00 8.00 4.75 6.00 15⅝-8 3.13 3¼-12 4.25 8.00 1¾-5 2.12 953.00
PRECISION DOUBLE ACTING CYLINDERS
• Provides hydraulic power on both advance and retract
• Designed for high cycling in production applications
• Rod wiper seals keep dirt and contamination out
• Clevis eye attachments are available
K
N
F
D C E
H
G
Q M
I L
A
B
Cylinder Plunger
Collapsed Extended Outside Push Pull
Cylinder Bore Thread
Model Height Height Dia. Effective Effective Dia. Protrusion Thread
Capacity Dia. Length
Number A B D Area Area E F G
(tons) C H
(in) (in) (in) (in²) (in²) (in) (in) (in)
(in) (in)
HPD0906 13.78 19.88
9 1.50 2.52 1.77 1.01 0.98 0.98 ¾″-16 0.75
HPD0910 17.80 27.91
HPD1606 15.31 21.57
16 2.00 2.99 3.14 1.56 1.42 1.16 1⅛″-12 0.98
HPD1610 19.29 29.53
Collar
Base to Adv. Port Top to Return Port
Model Length Thread Thread Length Int. Base Thread Int. Base Thread Length Weight
J K
Number L M N P Q (lbs)
(in) (in)
HPD0906 14.6
1.50 2.20 1.50 2″-12 0.60 1-11/16″-18 1.37
HPD0910 18.5
HPD1606 22.0
2.12 2.87 2.12 2⅝″-16 0.98 2-3/16″-16 1.61
HPD1610 28.2
LOW PROFILE CYLINDER KIT

• Compact design for use in confined spaces
• Rod wiper helps seal out dirt and contamination
• Specially designed return spring ensures a quick retraction and extends
the life of the spring
• Industrial hard chrome plated ram helps prevent scratching and corrosion 3″
• Includes stackable 1″, 2″, and 3″ aluminum adapters that conveniently Adapter
snap into the base of the ram
• Includes high flow ball coupler and dust cap
• Convenient storage case to keep cylinder and adapters together
1″ 2″ J72101
Adapter Adapter
Cylinder Internal
Cylinder Collapsed Extended Height Cylinder Ram Plunger Weight
Model Stroke Effective Pressure at
Capacity Height without adapter Housing Dia. Dia. (lbs)
Area Capacity
10 Ton J72101 1.5″ 2.35 in2 3.48″ 4.98″ 8,511 PSI 2.75″ 1.50″ 10 Lbs.
10 1-888-332-6419
LOW PROFILE CYLINDERS

• Compact design for use in confined spaces
• Rod wiper helps seal out dirt and contamination
• Specially designed return spring ensures a quick retraction
and extends the life of the spring
• Industrial hard chrome plated ram helps prevent scratching
and corrosion
• Plunger end is grooved to reduce load slippage
• Includes high flow ball coupler and dust cap
• HL1001, HL2002, and HL3002 coupler is tilted upward for
added clearance
E
Z Y
5°
C
D 3/8"-18NPTF
Low profile cylinders are great for confined spaces
Internal Cylinder
Cylinder Collapsed Extended Outside Plunger
Stroke Model Effective Height Height Diameter Diameter
(in) Number Area A B D E
(in²) (in) (in) (in) (in)
(psi) (in)
10 1.50 HL1001 2.35 8,511 3.53 3.48 4.98 1.73 2.75 1.50
20 1.75 HL2002 4.37 9,153 7.65 3.90 5.65 2.36 3.63 2.00
30 2.44 HL3002 6.49 9,245 15.84 4.61 7.05 2.87 4.00 2.50
50 2.36 HL5002 9.87 10,132 23.29 4.80 7.17 3.54 4.88 2.76
100 2.24 HL10002 19.64 10,183 44.07 5.55 7.80 5.00 6.50 3.54
Plunger Mounting
Model Bolt Circle Thread Thread Depth Weight
Number X Y Z (lbs)
(in) (mm) (in)
X HL1001 1.03 M4 5.7
HL2002 1.56 M4 11.0
0.32
HL3002 1.56 M5 15.0
HL5002 1.56 M5 21.8
HL10002 2.19 M8 0.10 45.4
FLAT BODY CYLINDERS
• Made of high quality steel
• Extremely low collapsed height for applications
with minimal clearance at the lift point
• Maximum working pressure 10,000 psi / 700 bar
• HF0503 and HF0503B come with ⅜″ regular flow coupler
Y E
3/8" - 18NPTF
D2 X
B
A
M
G
L
D1 C
Plunger
Cylinder Plunger
Cylinder Collapsed Extended Outside Plunger Base to
Cylinder Pressure Oil Bore to
Stroke Model Effective Height Height Dim. Dia. to Port Mtg.
Capacity at Capacity Dia. Base
(in) Number Area A B D1 x D2 E G Hole
(tons) Capacity (in³) C L
(in²) (in) (in) (in) (in) (in) M
(in) (in)
(in)
5 0.24 HF0503 1.10 9,090 0.26 1.26 1.50 1.18 2.4x1.6 0.98 0.69 0.80 0.87
10 0.43 HF1005 2.36 8,470 1.01 1.69 2.12 1.73 3.3x2.2 1.50 0.77 1.12 1.32
20 0.43 HF2005 4.38 9,130 1.88 2.01 2.44 2.36 4.0x3.0 2.00 0.75 1.54 1.56
30 0.51 HF3005 6.49 9,240 3.31 2.31 2.82 2.87 4.6x3.8 2.50 0.79 1.88 1.75
50 0.63 HF5006 9.86 10,140 6.21 2.64 3.27 3.54 4.5x4.5 2.76 0.79 2.25 2.13
75 0.63 HF7506 16.1 9,320 10.14 3.13 3.76 4.53 6.5x5.5 3.54 0.77 2.75 2.63
100 0.63 HF10006 19.64 10,180 12.37 3.37 4.00 5.00 7.0x6.0 3.54 0.79 3.00 2.94
150 0.63 HF15006 30.67 9,780 19.32 3.94 4.57 6.25 8.5x7.5 4.65 0.94 3.75 3.25
FLAT BODY
CYLINDER KITS
• Various height magnetic adapters eliminate
Model
Number
Hole
Pitch
X
Hole
Dia.
Y
Counter
Bore
Dia.
Counter
Bore
Depth
Weight
(lbs)
(in) (in) (in) (in)
dangerous cribbing
• Convenient carrying case HF0503 1.12 0.2 0.31 0.17 1.3
F B HF1005 1.44 0.28 0.42 0.31 3.3
HF2005 1.94 0.40 0.59 0.39 5.9
E
D
HF3005 2.06 0.40 0.63 0.44 9.7
C HF5006 2.62 0.43 0.75 0.50 14.9
G HF7506 3.00 0.51 0.83 0.56 25.4
HF10006 3.00 0.51 0.83 0.56 31.5
A
HF15006 4.62 0.51 0.83 0.56 53.4
Cylinder Oil Collapsed Adapter Dimensions

Stroke Model Cylinder Weight
Capacity Capacity Height Adapter A B C D E F G
(in) Number Model (lbs)
(tons) (in³) (in) (in) (in) (in) (in) (in) (in) (in)
I 0.25
II 0.5
5 0.24 HF0503B HF0503 0.26 1.26 1.61 2.56 2.32 0.48 1.10 0.24 5.5
III 1
IV 1.25
I 0.39 0.81 1.46 0.28
10 0.43 HF1005B HF1005 1.02 1.69 II 0.79 2.20 3.54 3.23 9.2
-
III 1.57
I 0.39 1.08 1.93 0.39
20 0.43 HF2005B HF2005 1.90 2.01 II 0.79 2.99 4.25 3.94 15.0
-
III 1.57
I 0.39 1.32 2.06 0.39
30 0.51 HF3005B HF3005 3.32 2.31 II 0.79 3.75 4.76 4.45 21.0
-
III 1.57
12 1-888-332-6419
ALUMINUM CYLINDERS
• Lightweight aluminum alloy construction
• Up to 60 percent lighter than comparable
tonnage steel rams
• Convenient carry handle
• Hard anodized aluminum piston rod provides
extra protection against corrosion and wear
• Maximum working pressure:
10,000 psi / 700 bar
E
F
B C
A
3/8" - 18NPTF
Lightweight, yet powerful
Base
Internal Cylinder
Cylinder Collapsed Extended Outside Plunger Saddle to
Stroke Model Effective Height Height Dia. Dia. Dia. Inlet Weight
Capacity at Capacity Dia.
(in) Number Area A B D E F Port (lbs)
(in²) (in) (in) (in) (in) (in) G
(psi) (in)
(in)
1.97 HU2002T 9.51 6.85 8.82 7.4
20 3.94 HU2004T 4.83 10,000 19.02 8.82 12.76 2.48 3.35 2.00 1.56 1.08 8.5
5.91 HU2006T 28.53 10.79 16.69 9.6
2.00 HU3002 13.00 6.50 8.50 11.0
30 4.00 HU3004 6.50 9,231 26.00 8.50 12.50 2.90 4.50 2.50 2.00 14.0
6.00 HU3006 39.00 10.50 16.50 17.0
2.00 HU5002 22.00 6.50 8.50 17.0
4.00 HU5004 44.00 8.50 12.50 21.0
50 11.00 9,091 3.70 5.50 3.10 2.50
6.00 HU5006 66.00 10.50 16.50 25.0
10.00 HU5010 110.00 14.50 24.50 1.50 34.0
4.00 HU7504 60.00 8.50 12.50 29.0
75 15.00 10,000 4.40 6.50 3.90 3.00
6.00 HU7506 90.00 10.50 16.50 35.0
2.00 HU10002 41.40 6.50 8.50 36.0
4.00 HU10004 82.80 8.50 12.50 43.0
100 20.70 9,662 5.10 8.00 4.30 3.50
6.00 HU10006 124.40 10.50 16.50 51.0
10.00 HU10010 207.0 14.50 24.50 68.0
HOLLOW HOLE CYLINDERS
• Minimum leak risk
• Ideal for pulling and pushing applications
• Heavy duty compression spring
• Dual wipers help prevent contamination
• Collar thread protector
• High flow coupler with dust cap
• XT cylinders do not come with internal plunger threads
G
L
H * 3 8"-18NPTF
K J
F E C D
Y
Z
A
B
Plunger
Internal
Cylinder Min. Max. Internal
Cylinder Pressure Oil O.D.
Stroke Model Effective Height Height I.D. O.D. Internal Thread Thread
Capacity at Cap. D
(in) Number Area A B E F J Length
(tons) Capacity (in3) (in)
(in2) (in) (in) (in) (in) (in) K
(psi)
(in)
0.31 HC1201T 0.89 2.36 2.67
¾″-16UN 0.63
1.61 HC1202T 4.70 4.74 6.36
12 2.91 8,236 2.76 0.77 1.38
1.61 HC1202XT 4.70 4.74 6.36
- -
2.99 HC1203XT 8.72 7.24 10.24
2.01 HC2002T 9.83 6.38 8.39
20 4.90 8,167 3.92 1.06 2.15 1-9/16″-16UN 0.75
6.06 HC2006T 29.70 12.05 18.11
2.52 HC3002T 15.93 7.05 9.57
30 6.32 9,488 4.50 1.31 2.48 1-13/16″-16UN 0.87
6.11 HC3006T 38.67 13.02 19.13
3.00 HC6003T 39.10 9.77 12.77
60 13.05 9,195 6.25 2.13 3.66 2¾″-16UN 0.75
6.00 HC6006T 78.25 12.76 18.76
100 3.00 HC10003T 22.13 9,036 66.31 10.00 13.00 8.39 3.11 4.92 4″-16UN 0.98
Collar Thread Base Base Mounting Hole

to Inlet Thread
Model Dia. Lgth. Bolt Circle Thread Weight
Port Depth
Number H L X Y (lbs)
G Z
(in)
HC1201T 0.57 3.3
HC1202T 0.59 6.2
2¾″-16 1.81 2.00 5/16″-18UNC 0.35
HC1202XT 0.59 6.2
HC1203XT 0.75 8.6
HC2002T 15.9
Y 3⅞″-12 1.50 0.75 3.25 ⅜″-16UNC 0.37
HC2006T 29.5
HC3002T 22.9
4½″-12 1.66 0.91 3.62 ⅜″-16UNC 0.55
HC3006T 43.0
X HC6003T
6¼″-12 1.91 1.06 5.12 ½″-13UNC 0.55
65.7
HC6006T 81.1
HC10003T 8⅜″-12 2.38 1.06 7.01 ⅝″-11UNC 0.75 113.3
14 1-888-332-6419
LOCK NUT CYLINDERS

• Single acting cylinder with mechanical safety lock nut
• Designed to support load for extended periods without
hydraulic pressure.
• Overflow port prevents cylinders from over travel
• Load return
• Solid steel cylinder body
• Ideal for lifting and holding loads
• Plated pistons to resist corrosion and rust
Cylinder
Cylinder Collapsed Extended Outside Plunger
Cylinder Oil Bore
Stroke Model Effective Height Height Diameter Outside
Capacity Capacity Diameter
(in) Number Area A B D Thread
(tons) (in³) C
(in²) (in) (in) (in) E
(in)
1.97 HLN5502 21.65 6.50 8.40
3.94 HLN5504 43.27 8.40 12.40
5.91 HLN5506 64.90 10.40 16.30
55 10.99 3.70 4.90 Tw95-6N
7.87 HLN5508 86.54 12.40 20.20
9.84 HLN5510 108.17 14.30 24.20
11.81 HLN5512 129.80 16.30 28.10
1.97 HLN10002 40.49 7.40 9.30
3.94 HLN10004 80.98 9.30 13.30
5.91 HLN10006 121.48 11.30 17.20
100 20.57 5.10 6.50 Tw130-4N
7.87 HLN10008 161.97 13.30 21.10
9.84 HLN10010 202.46 15.20 25.10
11.81 HLN10012 242.95 17.20 29.00
Depth Saddle Base

Lock
Saddle of Potrusion to
Nut
Model Diameter Plunger From Inlet Weight
Length
E Number F Hole Plunger
H
Port (lbs)
(in) G1 G2 I
G2 F (in) (in)
(in)
(in)
G1
HLN5502 34.0
H HLN5504 44.5
B HLN5506
1.40
55.1
HLN5508 65.9
A HLN5510 76.5
HLN5512 87.1
2.80 0.08 0.51 1.10
HLN10002 67.2
HLN10004 85.8
I
HLN10006 104.3
1.80
HLN10008 122.6
C
HLN10010 141.1
D HLN10012 159.6
THREADED CYLINDERS
• High quality threaded single acting cylinders
• Removable threaded plunger adapter allows for the
use of a variety of threaded attachments
• Used to attach accessories to rod end and base
G
Threaded base
allows for easy
3/8" - 18NPTF L
1 1/4" - 11.5NPTF
installation of
attachments
and
D E
mounting ap-
plications
1 1/4" - 11.5NPSM 2 1/4" - 14 UNC
S
Internal Base Collar

Cylinder Collapsed Extended Outside Plunger Saddle
Cylinder Pressure Oil to Inlet Thread
Stroke Model Effective Height Height Dia. Dia. Height Weight
Capacity at Capacity Port Length
(in) Number Area A B D E S (lbs)
(tons) Capacity (in³) G L
(in²) (in) (in) (in) (in) (in)
(psi) (in) (in)
4 5.07″ HT0405 1.00 10,120 5.00 10.31 15.39 1.5 1.33 1.33 0.84 1.00 5.0
5.95 HT1006 13.33 11.46 17.41 10.6
10 2.24 8,928 2.26 1.49 1.67 1.13 0.94
9.96 HT1010 22.30 15.47 25.43 14.1
20 5.16″ HT2005 5.14 10,741 25.70 11.77 16.93 3.35 2.24 1.85 1.63 1.40 22.0
PULL CYLINDERS • High strength steel construction

and longer life
• Polyurethane cup seal helps provide for optimum performance
• External plunger threads
• Internal base threads
• Used for pulling and tensioning
K
G
Q
Z 3/8"-18NPTF
D Y C E F H
L
A P
B
Internal Cylinder Top to Collar

Cylinder Collapsed Extended Outside
Cylinder Pressure Oil Bore Inlet Thread
Stroke Model Effective Height Height Diameter
Capacity at Capacity Diameter Port Thread Length
(in) Number Area A B D
(tons) Capacity (in³) C G H L
(in²) (in) (in) (in)
(psi) (in) (in) (in)
2.5 5.00 HP0205 0.56 8,929 2.78 10.55 15.55 1.89 1.13 1.65 1½˝-16 0.98
5 5.55 HP0505 1.14 8,772 6.34 11.93 17.48 2.25 1.69 1.50 2¼˝-14 1.00
10 5.95 HP1006 2.44 8,197 14.48 11.75 17.70 3.35 2.17 1.50 M85x2 1.00
Adapter Plunger Base Mounting Hole

Model Thread Length Dia. Thread Length Thread Depth Weight
Number Thread (lbs)
F P E K Q Z
Y
(in) (in) (in) (in) (mm) (in)
HP0205 ¾˝-14NPTF 1.13 0.75 0.76 M16 x 1.5 ¾˝-14NPTF 0.72 6.4
HP0505 1¼˝-11.5NPTF 1.25 1.18 0.93 M28 x 1.5 1¼˝-11.5NPTF 0.95 9.3
HP1006 - - 1.26 1.02 M30 x 2 M30x2 0.98 20.9
16 1-888-332-6419
SPREADERS
• Designed to work in confined working space
• Ideal for wedging, prying and opening
• High strength forged steel
• Spring return for easy operation
B B
3/8"-18NPTF
3/8"-18NPT
F
D
D
A A
C
E
E C
SR05 SR10
Cylinder Cylinder Oil Dimensions (in)
Model Weight
Capacity Effective Area Capacity
Number A B C D E (lbs)
(tons) (in²) (in³)
0.5 SR05 1.22 0.58 3.54 7.57 0.51 2.05 2.36 4.8
1 SR10 1.09 0.86 3.90 6.57 0.47 2.17 2.20 4.8
BEAD BREAKER J22953 Bead Breaker Combo

Includes:
• 5″ opening • J22910 Bead breaker
• Works on single rimmed wheels • PA1500 Metal air pump
• Constructed from rugged steel • CS3838C Hydraulic hose
• Works with any 10,000 PSI pump • CH38 Hydraulic coupler set
• Hydraulic pressure does all the
unseating
• Light weight and portable
J22910
Maximum Hydraulic Oil Product Size Weight

Capacity Model
Ram Size Capacity (lbs)
5 Ton J22910 26″ 250 mL 17-½″ X 5-½″ X 12″ 36
METAL AIR PUMPS
PA1500
PA2000
PA3801 PA7550
• High strength reinforced alloy reservoir is lightweight and
corrosion resistant
• Pressure relief valve for overload protection
• Suggested air pressure range: 110-175 psi. / 7.5-12 bar
• Dust cover protection for the release control valve
• PA2000 offers a turbo function that features high flow at
high pressure condition
Flow Rate@ 110 PSI Air Pressure
70
60
Oil Flow (in3/min)
Air pumps can be used in a variety of

50 industrial settings
40
1/4"-18NPTF
3/8"-18NPTF
30
20
10
C
B D
0
0 2,000 4,000 6,000 8,000 10,000
Pressure (psi)
Model PA1500
Model PA2000 (Turbo) A E
Usable Oil Output Input Air Dimensions (in)

Used Pressure Flow Rate
Oil Model Pressure Weight
with Rating (in³/min)
Capacity Number Range A B C D E (lbs)
Cylinder (psi)
(in³) No Load Load (psi)
91.5 PA1500 66 11 10.35 5.00 7.28 5.16 5.35 18.1

Single 122.1 PA2000 65 12 11.57 6.02 7.91 6.18 5.98 20.1
10,000 110-175
Acting 231.9 PA3801 65 11 12.64 5.08 7.36 5.24 7.36 27.1
460.6 PA7550 65 11 12.64 5398 8.31 6.14 8.43 36.0
18 1-888-332-6419
REMOTE CONTROL AIR PUMPS

• 10 ft. hand held remote allows
user to operate the air pump from
a safe distance
• Air pump comes with convenient
carry handle
PA380L
1/4"-18NPTF
3/8"-18NPTF
C
B
D
A E
PA1500L

Pressure Flow Rate
Used with Oil Model Pressure Weight
Rating (in³/min)
Cylinder Capacity Number Range A B C D E (lbs)
(psi)
91.5 PA1500L 61 10 10.98 6.30 8.03 5.12 5.35 19.4

Single Acting 10,000 110-175
231.9 PA3801L 61 10 12.64 6.42 8.15 5.20 7.36 30.4
DOUBLE ACTING AIR PUMP

• PA1500M offers a 4-way control valve for
operation of double acting cylinders
1/4"-18NPTF 3/8"-18NPTF
C
B D
A E PA1500M

Pressure Flow Rate
Rating (in³/min)
(psi)
Double Acting 91.5 PA1500M 10,000 66 11 110-175 10.51 5.00 7.99 5.35 5.35 19.1
ALL POSITION AIR PUMPS PA600
• Pump can work in any position
• Mounting plate allows for the pump to
be securely fastened
Hand
• Hydraulic port swivels for easy connection Operated
PA600H

Pressure Flow Rate
Rating (in³/min)
(psi)
PA600 6.18 5.59 14.1

Single Acting 36.6 10,000 61 9 110-175 16.77 9.84 7.01
PA600H 4.49 5.75 12.5
ROTARY AIR PUMPS

• Two speed operation for fast cylinder
advance and improved productivity
• Models available with auto return valve
• Internal relief valves for overload protection
A B
CD PAR4003, PARD4003
F
E
G
PAR4003, PARD4003 PAR1703, PARD1703
Air Sound Dimensions (in) PAR1703, PARD1703
Model Weight
Comsuption Level Rotary Air Pump Flow Chart
Number A B C D E F G (lbs)
(cfm) (dBA)
900
PARD1701 44 93 19.10 9.39 5.79 4.72 8.07 12.34 15.90 42 800
700
Oil Flow (in 3/min)
PARD1703 44 93 - 11.95 8.35 7.28 12.01 12.34 17.96 54 600

500
PAR1703 44 93 11.94 10.53 8.21 7.28 12.01 12.34 18.08 55
400
PARD4001 95 100 19.10 11 5.79 4.72 8.07 12.34 16.34 54 300
200
PARD4003 95 100 - 13.56 8.35 7.28 12.01 12.34 18.4 66 100
0
PAR4003 95 100 13.55 10.53 8.21 7.28 12.01 12.34 18.52 67 0 2000 4000 6000 8000 10000
PARM1703 44 93 11.94 10.53 8.21 7.28 12.01 12.34 18.08 55 Pressure (psi)
PARM4003 95 100 13.55 10.53 8.21 7.28 12.1 12.34 18.52 67

PAR4003 & PARM4003 PARD4001 & PARD4003
PAR1703 & PARM1703 PARD1701 & PARD1703
Oil Output Dynamic

Usable Pressure Rating
Used Motor Pressure Flow Rate air
Oil Model Valve Valve
with Size Rating 1st 2nd 1st 2nd pressure
Capacity Number Type Function
Cylinder (hp) (psi) Stage Stage Stage Stage range
(gal)
(psi) (psi) (in³/min) (in³/min) (psi)
1 PARD1701
313 22 Dump Advance/Return 60 ~ 80
1.7 3 PARD1703
Single 3 PAR1703 417 22 Manual PW3 Advance/Hold/Return
Acting 1 PARD4001
4 465 70 Dump Advance/Return 60 ~ 100
3 PARD4003 10,000 700 10,000
3 PAR4003 512 70 Manual PW3 Advance/Hold/Return
60 ~ 80
1.7 3 PARM1703 417 22 Manual PW4 Advance/Hold/Return
Double
Acting 60 ~ 100
4 3 PARM4003 512 70 Manual PW4 Advance/Hold/Return
20 1-888-332-6419
SINGLE SPEED METAL HAND PUMPS

• All metal reservoirs resist cracks and leaks
• Internal pressure relief valve for overload protection
Ø.4 Ø.4
H J H J
P601S
K
K
G G
A A
3/8"-18NPTF
3/8"-18NPTF
B
B
F
F
E D
D
P1201S E C
C
P601S P1201S
Usable Max.
Piston Oil
Used with Pump Oil Model Pressure Rating Oil Displacement Operating Weight
Stroke Outlet
Cylinder Type Capacity Number (psi) per Stroke Force (lbs)
(in) Port
(in3) (lbs)
Single Single 36.5 P601S 0.15 109 0.79 13.0

10,000 ⅜″-18NPTF
Acting Speed 67.0 P1201S 0.13 132 0.82 20.0
Model Dimensions (in)

Number
A B C D E F G H J K
P601S 18.94 6.46 19.53 15.35 1.57 1.26 20.79 5.20 3.74 14.45
P1201S 19.75 6.64 21.95 16.63 2.36 1.73 20.71 4.72 3.74 18.27
TWO SPEED ALUMINUM HAND PUMPS

• Lightweight aluminum alloy for easy handling
• Two speed operation increases productivity and
reduces user fatigue
• Internal pressure relief valve for overload protection
Ø.4
Ø.4
H J
H J
K
P1000
G
G
A
A
1/4"-18NPTF 3/8"-18NPTF
B
B
F
F
E D
P350 E D
C C
P350 P1000
Oil Displacement
Pressure Rating per Stroke Max.
Usable Oil Piston Oil
Used with Pump Model Operating Weight
Capacity Stroke Outlet
Cylinder Type Number Force (lbs)
(in3) 1st Stage 2nd Stage 1st Stage 2nd Stage (in) Port
(lbs)
(psi) (psi) (in3) (in3)
Single Two 21.4 P350 0.18 0.05 88 0.38 ¼″-18NPTF 6.6

200 10,000
Acting Speed 61.0 P1000 0.81 0.14 132 0.82 ⅜″-18NPTF 13.2

Number
A B C D E F G H J K
P350 13.43 5.91 13.89 9.09 2.36 1.34 14.13 3.35 2.56 -
P1000 19.69 6.38 19.88 14.96 3.62 1.26 20.63 4.72 3.94 16.93
TWO SPEED METAL HAND PUMPS
P1201 P2001 P2301
P4301 P8701
• All metal reservoirs resist cracks and leaks Ø.4 Ø.4
• Two speed operation increases productivity H J

H J
and reduces user fatigue K
• Internal pressure relief valve for over load G

G
protection A A
• Load release valve for single acting cylinder 3/8"-18NPTF

3/8"-18NPTF
B
usage F B
• Large oil capacity to power a wide range of E D F
D
cylinders and tools C E
C
Ø.4 P1201
Ø.4
P2001
H J
H J
K
K
G
G
A A
H J
3/8"-18NPTF
B 3/8"-18NPTF
B
F
F
E D
E D
C G
C
A
P2301 P4301
Number
A B C D E F G H J K
B
P1201 19.75 6.64 21.95 16.63 2.36 1.73 20.71 4.72 3.74 18.27 F
P2001 19.75 6.54 23.86 18.54 2.36 2.01 20.71 4.82 2.56 -
E
P2301 19.75 6.64 23.69 18.37 2.36 1.73 20.71 4.72 3.54 22.56
D
C
P4301 19.91 7.56 22.62 17.30 2.36 1.73 20.87 4.72 3.74 21.46
P8701
P8701 25.79 11.61 30.35 11.54 24.17 8.25 26.94 15.24 11.18 -
Oil Displacement
Pressure Rating Max. per Stroke
Usable Oil Piston Oil
Used with Pump Model Operating Weight
Capacity Stroke Outlet
Cylinder Type Number 1st Force (lbs)
(in3) 2nd Stage 1st Stage 2nd Stage (in) Port
Stage (lbs)
(psi) (in3) (in3)
(psi)
67.0 P1201 20.3
122.0 P2001 20.9
200 0.81 0.14 132 0.82
Single Acting Two Speed 128.0 P2301 10,000 ⅜″-18NPTF 27.5
250.0 P4301 32.2
476.0 P8701 290 7.71 0.29 143 1.69 90.8
22 1-888-332-6419
DOUBLE ACTING HAND PUMPS

• A 4-way control valve for operation of double acting cylinders
• Large oil capacities to power a wide range of cylinders and tools
• Two speed operation increases productivity and reduces user fatigue
H J
Ø.4
P2301M H J
K
G
C A
G
A
B
3/8"-1 8NPTF F
B
F E
E D D
C
P8701M
Oil Displacement
Usable Pressure Rating per Stroke Max.
Piston Oil
Used with Pump Oil Model Operating Weight
Stroke Outlet
Cylinder Type Capacity Number 1st 2nd Force (lbs)
1st Stage 2nd Stage (in) Port
(in3) Stage Stage (lbs)
(in3) (in3)
(psi) (psi)
Double 128.0 P2301M 200 0.81 0.14 132 0.82 32.2

Two Speed 10,000 ⅜″-18NPTF
Acting 476.0 P8701M 290 7.31 0.29 143 1.67 77.4

Number
A B C D E F G H J K
P2301M 19.75 6.64 23.69 18.37 2.36 1.73 20.71 4.72 3.54 22.56
P8701M 25.79 11.61 30.35 11.54 24.17 8.25 26.94 15.24 11.18 -
LOW PRESSURE HAND PUMP

• Lightweight and portable for use with punch drivers
• Rugged steel pump with chrome handle
• Single speed
• Mounting bracket for easy, permanent mounting
• Maximum working pressure 7,200 psi
P240L
Usable Max.
Oil Displacement Piston Oil
Used with Pump Oil Model Pressure Rating Operating Weight
per Stroke Stroke Outlet
Cylinder Type Capacity Number (psi.) Force (lbs)
(in3) (in) Port
(in3) (lbs)
Low Pressure
Single Acting 14.7 P240L 7,200 0.09 55.7 0.63 ¼″ - 18 NPTF 9.02
Single Speed

Number
A B C D E F G H J
P240L 16.57 12.01 24.78 12.28 13.21 15.53 4.53 12.32 2.43
PUMP/CYLINDER COMBO
• Matched sets provide a combination of components Each Set Includes:
for single acting cylinder applications • ⅜″, 6 Foot Hydraulic Hose
• Ordering is as easy as 1, 2, 3 • Gauge Adapter
1.Select the cylinder you want • 4″ Wet Gauge
2.Select the pump you want • ⅜″ High Flow Male Coupler
3.Choose the set number • Cylinder
• Pump
Wet Gauge
Cylinder
⅜″, 6 Foot
Hydraulic Hose
⅜″ High Flow
Male Coupler
Gauge Adapter
Pump
Cylinder Combo Model Number

Combo
Collapsed with Hand Pump with Air Pump
Type Capacity Stroke
(ton) Model Height Model Model Model Model Model Model
(in)
(in) P350 P1000 P2001 PA1500 PA1500L PA3801
5 H0505 5.08 8.70 SP3-0505
H1002 2.01 4.84 SP10-1002 SA15-1002
H1006 5.94 9.84 SP10-1006 SA15-1006 SAL15-1006
10 H1010 9.96 13.86 SP10-1010 SA15-1010 SAL15-1010
HT1006 5.95 11.46 SP10-1006T SA15-1006T SAL15-1006T
HT1010 9.96 15.47 SP10-1010T SA15-1010T SAL15-1010T
Single H1504 3.86 8.66 SP10-1504 SA15-1504
Acting 15
Cylinders H1506 5.87 10.67 SP10-1506 SA15-1506
H2502 2.01 6.82 SP10-2502 SA15-2502
H2504 3.94 8.78 SP10-2504 SA15-2504
25
H2506 5.94 10.79 SP10-2506 SA15-2506
H2508 7.95 12.80 SP20-2508 SA15-2508
55 H5506 6.25 11.13 SP20-5506 SA15-5506
100 H10006 6.63 13.25 SA38-10006
HU3002 2.00 6.50 SP10-3002U SA15-3002U
Single 30
Acting HU3006 6.00 10.50 SP10-3006U SA15-3006U
Aluminum 50 HU5006 6.00 10.50 SP20-5006U SA15-5006U
Cylinders
100 HU10006 6.00 10.50 SA38-10006U
Single 10 HL1001 1.50 3.48 SP3-1001L SA15-1001L
Acting
20 HL2002 1.75 3.90 SP3-2002L SA15-2002L
Low
Profile
30 HL3002 2.44 4.61 SP10-3002L SA15-3002L
Cylinder
24 1-888-332-6419
ELECTRIC PUMPS
• Quiet operation meets OSHA
regulations (80dBA)
• 2 speed operation allows for faster cylinder advance
• Full load starting capacities
• Internal filter keeps contamination from damaging
pump
• Rugged durable design meets the demands of
industrial applications
• Precision components to minimize wear and improve
overall dependability
• All pumps are single phase
PE1503T
PE1002T
PE0501T & PEM0501T only PE & PEM Series

Electric Pumps Flow Chart
Number A B C D E F G H
600
Oil Flow ( in3/min) 
PE0501T 14.92 10.28 19.09 4.72 5.67 7.99 8.07 12.36

PE1002T 16.65 12.01 17.83 5.94 6.89 9.21 4.53 12.36
400
PE1503T 16.65 12.01 19.72 7.24 8.19 10.51 4.53 12.36
PE1505T 16.57 12.01 24.78 12.28 13.21 15.53 4.53 12.32
200
PE3005 16.54 12.01 26.54 12.28 13.23 15.51 4.53 12.36
PEM0501T 14.92 10.28 19.09 4.72 5.67 7.99 8.07 12.36
0
0 2,000 4,000 6,000 8,000 10,000
PEM1002T 16.65 12.01 17.83 5.94 6.89 9.21 4.53 12.36
Model PE0501T (0.5hp) Pressure (psi) 
PEM1503T 16.65 12.01 19.72 7.24 8.19 10.51 4.53 12.36
Model PE1002T (1hp)
Model PE1503T (1.5hp) PEM1505T 16.57 12.01 24.78 12.28 13.21 15.53 4.53 12.32
Model PE3005T (3hp)
PEM3005 16.54 12.01 26.54 12.28 13.23 15.51 4.53 12.36
Pressure Oil Output

Usable Rating Flow Rate
Motor Current Motor
Use with Oil Model Valve Valve Weight
Size Draw Voltage
Cylinder Capacity Number 1st 2nd 1st 2nd Type Function (lbs)
(hp) (amps) (volts)
(gal) Stage Stage Stage Stage
(psi) (psi) (in³/min) (in³/min)
0.5 1.0 PE0501T 350 293 18 9 59.5
1.0 2.0 PE1002T 397 37 12 70.5
Single 3-way, 115
3.0 PE1503T 476 61 88.5
Acting 1.5 700 3-position
5 PE1505T 476 61 17 94.0
3.0 5.0 PE3005 592 110 Advance/ 230 101.0
10,000 Hold/
0.5 1.0 PEM0501T 350 293 18 Return 9 59.5
1.0 2.0 PEM1002T 397 37 12 70.5
Double 4-way, 115
3.0 PEM1503T 476 61 88.5
5 PEM1505T 476 61 17 94.0
3.0 5.0 PEM3005 592 110 230 101.0
ELECTRIC PUMPS
with PENDANT SWITCH
• Quiet operation meets OSHA
regulations (80dBA)
• 2 speed operation allows for faster
cylinder advance
• Full load starting capacities
• Internal filter keeps contamination from
damaging pump
• 10 ft. hand held pendant switch allows user
to turn on/off motor
• All pumps are single phase
PEW0501T
PEW1503T
PEW0501T & PEWM0501T only PEW & PEWM Series

PEW0501T 14.92 10.28 19.09 4.72 5.67 7.99 8.07 12.36
PEW1002T 16.65 12.01 17.83 5.94 6.89 9.21 4.53 12.36
PEW1503T 16.65 12.01 19.72 7.24 8.19 10.51 4.53 12.36
PEW1505T 16.57 12.01 24.78 12.28 13.21 15.53 4.53 12.32
PEW3005 16.54 12.01 26.54 12.28 13.23 15.51 4.53 12.36
PEWM0501T 14.92 10.28 19.09 4.72 5.67 7.99 8.07 12.36
PEWM1002T 16.65 12.01 17.83 5.94 6.89 9.21 4.53 12.36
PEWM1503T 16.65 12.01 19.72 7.24 8.19 10.51 4.53 12.36
PEWM1505T 16.57 12.01 24.78 12.28 13.21 15.53 4.53 12.32
Electric pumps can be used in a
variety of industrial settings PEWM3005 16.54 12.01 26.54 12.28 13.23 15.51 4.53 12.36
Pressure Oil Output

Motor Current Motor
Use with Oil Model Valve Valve Weight
Size Draw Voltage
Cylinder Capacity Number 1st 2nd 1st 2nd Type Function (lbs)
(hp) (amps) (volts)
(gal) Stage Stage Stage Stage
(psi) (psi) (in³/min) (in³/min)
0.5 1.0 PEW0501T 350 293 18 9 59.5
1.0 2.0 PEW1002T 397 37 12 70.5
Single 3-way, 115
3.0 PEW1503T 476 61 88.5
5 PEW1505T 476 61 17 94.0
3.0 5.0 PEW3005 592 110 Advance/ 230 101.0
10,000 Hold/
0.5 1.0 PEWM0501T 350 293 18 Return 9 59.5
1.0 2.0 PEWM1002T 397 37 12 70.5
Double 4-way, 115
3.0 PEWM1503T 476 61 88.5
5 PEWM1505T 476 61 17 94.0
3.0 5.0 PEWM3005 592 110 230 101.0
26 1-888-332-6419
Electric PUMPS
with SOLENOID VALVE
• Quiet operation meets OSHA regulations (80dBA)
• Ideal for applications where a remote control is
required
• 2 speed operations allows for faster cylinder
advance
• Full load starting capabilities
• Internal filter keeps contamination from damaging
pump
• 10 ft. hand held remote controls the solenoid valve
PESM0501T
PESM1503T

PES0501T 12.74 10.26 19.10 4.72 5.65 10.00 8.07 12.32
PES0502T 12.74 10.26 19.10 4.72 5.65 10.00 8.07 12.32
PES1002T 17.88 12.01 17.88 5.98 6.90 11.26 4.51 12.32
PES1503T 17.88 12.01 17.88 5.98 6.90 11.26 4.51 12.32
PES1505T 16.10 12.01 17.13 5.98 6.90 11.26 4.51 12.32
PESM0501T 16.10 12.01 17.13 5.98 6.90 11.26 4.51 12.32
PESM0502T 16.10 12.01 19.78 7.28 8.20 12.56 4.51 12.32
PESM1002T 16.10 12.01 19.78 7.28 8.20 12.56 4.51 12.32
PESM1503T 16.10 12.01 24.78 12.28 13.20 17.56 4.51 12.32
PESM1505T 16.10 12.01 24.78 12.28 13.20 17.56 4.51 12.32
Pressure Oil Output

Motor Model Current Motor
Use with Oil Valve Valve Weight
Size Number Draw Voltage
Cylinder Capacity 2nd 1st 2nd Type Function (lbs)
(hp) 1st Stage (amps) (volts)
(gal) Stage Stage Stage
(psi)
(psi) (in³/min) (in³/min)
1 PES0501T 61.5
0.5 350 293 18 9
2 PES0502T 65.3
3-way,
Single
1 2 PES1002T 311 37 3-position 12 72.6
Acting
3 PES1503T 700 90.4
1.5 470 61 17
5 PES1505T Advance/ 98
10,000 115
Hold/
1 PESM0501T Return 61.5
0.5 350 293 18 9
2 PESM0502T 65.3
4-way,
Double
1 2 PESM1002T 311 37 3-position 12 72.6
Acting
3 PESM1503T 700 90.4
1.5 470 61 17
5 PESM1505T 98.0
Electric PUMP with AUTO RETURN VALVE
• Quiet operation meets OSHA regulations (80dBA)
• Best suited for punching, crimping, and cutting applications
• 2 speed operation allows for faster cylinder advance
• Full load starting capabilities
• Internal filter keeps contamination from damaging pump
• Rugged durable design meets the demands of industrial applications
• 10 ft. remote pendant switch to control motor on/off
F
ED
H G
B A

Number A B C D E F G
PED0501T 12.76 10.28 19.09 4.72 5.79 7.36 12.36
Pressure Oil Output

Motor Current Motor Sound
Oil Model Valve Valve Weight
Size Draw Voltage Level
Capacity Number 1st Type Function (lbs)
(hp) 1st Stage 2nd Stage 2nd Stage (amps) (volts) (dBA)
(gal) Stage
(psi) (psi) (in³/min)
(in³/min)
2-way, Advance/
0.5 1.0 PED0501T 350 10,000 233 18 2-position Return 9 115 80 66.2
GAS PUMP with HONDA ENGINE PG5505 Flow Chart

• Gas engine pump will provide 10,000 psi.
hydraulic force at remote locations 800
• Industrial grade 5.5 hp Honda gas engine

Oil Flow (in³/min) ►
• Manual control valve for use with single or 600
double acting cylinders or tools

400
• Two speed pump designed for rapid cylinder advance
• Gas pump features a sturdy protective roll cage for 200
use in the toughest environments
0
0 2,000 4,000 6,000 8,000 10,000
Pressure (psi) ►
24.62"
24.62"
12.02"
12.02"
9.46"
7.91"
9.46"
7.91"
11.26" 18.43" 11.26" 18.43"
22.51" 23.3" 22.51" 23.3"
Usable Max. Pressure Rating Oil Output Flow Rate

Motor Rotation Sound
Oil Model Pressure (psi) (in³/min) Valve Valve Weight
Size Speed Level
Capacity Number Output Type Function (lbs)
(hp) 1st Stage 2nd Stage 1st Stage 2nd Stage (rpm) (dBA)
(gal) (psi)
Advance/ Hold/
5.5 5 PG5505 10,000 700 10,000 427 100 Manual Return 3,600 93 121.2
28 1-888-332-6419
MAINTENANCE KITS
• Sets are portable for easy use in the plant or on the job site
• Custom fitted, rugged blow molded storage case
• 10 ton set has wheel for easy movement
• Designed for applications of pushing, spreading, pressing,
and more
J50200
J50040
Pump Ram
Capacity Model Number of Weight
Capacity Collapsed Height Extended Height Effective Area
(tons) Number attachments (lbs)
(psi) (in²) (in³) (in²)
4 8,000 J50040 11.00 15.75 0.998 14 46.0
10 10,000 J50100 13.63 19.75 2.411 13 81.0
20 10,000 J50200 11.77 16.93 5.14 16 206.0
*When extension tubes and/or offset attachments are used, the capacity is reduced.
Part Number
Contents of Kit
Model J50040 Model J50100 Model J50200
Hand Pump J0401 J1001 J65421
Ram J0402 J1002 J65740
Hose J0403 J1003 J65593
Case J0404 J1004 J65073
Hydraulic Spreader (1000lbs. capacity) J0405 J1005 -
Combination Head (90 degrees) J0406 J1006 -
Rubber Head J0407 J1007 -
Ram Toe (offset) J0408 J1008 J65774
Plunger Toe (offset) J0409 J1009 -
Flat Base J0410 J1010 J65778
Serrated Saddle J0411 J1011 J65771 (2)
Wedge Head (offset) J0412 J1012 J65773
Male Connector J0413 J1013 J65770
Hose Coupler CRZ14M CRZ14M CH38M
Ram Coupler CRZ14F CRZ14F CH38F
Chain Pull Plate J65775
V Head J65772
Note: J50040 and J50100
Threaded Coupling J65776 (3)
come with ¼" regular flow coupler
8' Chain w/ hook J97518
J50100 Ram Base J65778

Extension Tube 3″ J0414 4″ J1014 3″ J65760
6⅛″ J0415 10″ J1015 5″ J65762
8½″ J0416 18″ J1016 10″ J65764
16½″ J0417 27″ J1017 18″ J65766
19½″ J0418 24″ J65768
25/55/100 TOn
SHOP PRESSES
• Heavy steel welded construction
• Multi-position bed for work height adjustment
• Ideal for the removal or installation of gears, universal joints,
pulleys, wrist pins, and other press jobs
• Excellent for bending, bonding or straightening applications
A (min)
K Dimensions (in)
Model Weight
Number A A (lbs)
J B C D E F G H I J K
A (max) (Min.) (Max.)
B IMP2506
4.5 47.25 71 48 28 30 3 6.5 6 11.5 560
IAP2506
F
IAP5506
E IEP5506 6 3
I
IMP5506 14.0 55.5 79 56 30 35.4 4 9 10 14.8 760
IAP5513
IEP5513
G H
C D IEP10010 11.3 51.0 89 63 30 35.5 8 - 10 - 12 16.0 1550
Cylinder Working Space

Capacity Model Pump Pump Cylinder Bed Product Size
Stroke (A Min. / A Max.)
(tons) Number Type Model Model Position (H X L X W)
(in) (in)
IMP2506 Manual P1000 H2506
25 8 71″X 48″X 28″ 4½″ ~ 47¼″
IAP2506 Air PA1500 H2506
IAP5506 Air PA1500 6
IEP5506 Electric PEW0501T H5506
55 IMP5506 Manual P2301 9 79″X 56″ X 30″ 14″ ~ 55½″
IAP5513 Air PA3801
H5513 13 AP100 • Arbor plates
IEP5513 Electric PEW0501T (in pairs)
100 IEP10010 Electric PEW1002T H10010 8 10 89″X 63″X 30″ 11¼″ ~ 51″
25 TON SHOP PRESS ACCESSORIES

CS25 includes:
300-002-229 • Ram forcing cap
300-002-807 • V push adapter
300-002-953 • Threaded adapter
300-002-510 • ¾″ push adapter
300-002-511 • 1″ push adapter
AP25 • Arbor plates (in pairs)
55 TON SHOP PRESS ACCESSORIES

CS55 includes:
400-002-230 • Ram forcing cap
400-002-368 • Threaded adapter
400-002-757 • 1½″ push adapter
400-002-756 • 1¼″ push adapter
400-002-808 • V push adapter
AP55 • Arbor plates (in pairs)
30 1-888-332-6419
MANUAL BOTTLE JACKS

• Hydraulic system is protected from internal damage by a patented
by-pass mechanism
• Machined and polished cylinders with die-cut threads provide non-abrasive
leak-free, durable performance
• Fabricated from hard-cast steel with heat-treated critical stress areas
• Unique cross-type forged release valve assures positive load control
• A wide, rugged base provides stability and strength
Min. Max. Hydraulic Extension Base Size Base Size

Capacity Model Weight
Height Height Lifting Screw Length Width
(ton) Number (lbs)
(in) (in) (in) (in) (in) (in)
J10125 9½ 18⅝ 6 3⅛ 17.5
12 5¼ 5⅛
J10129 6 10⅝ 3 1⅝ 14.9
J10205 9½ 18⅝ 6 3⅛ 27.5
20 6¼ 5⅞
J10209 6½ 11¼ 3⅛ 1⅝ 21.8
30 J10300 11 18 7 - 8⅛ 6⅞ 53.5
50 J10500 12 19 7 - 10⅞ 7-⅜ 96.4
AIR/MANUAL BOTTLE JACKS

• Effortless air operation will greatly reduce operator fatigue and speed up
the efficiency of industrial work
• A compact yet powerful air turbo motor U.S. Patent No. 5,341,723 is equipped
to raise the load to the desired height efficiently, effortlessly, and safely
•Versatile ″Quick Connector″ design provides for easy removal of air hose
from air motor allowing compact storage or remote operation
• All air bottle jacks have chrome plated rams
Input Air
Min. Max. Hydraulic Extension Base Size Base Size
Capacity Model Pressure Weight
Height Height Lifting Screw Length Width
(ton) Number Range (lbs)
(psi)
12 J18122 9½ 18½ 5½ 3½ 7⅝ 6½ 28.6
20 J18202 9¾ 18¾ 5⅛ 3⅞ 8¼ 7¼ 37.4
30 J18302 11 18 7 10¼ 8¼ 110-175 60.5
-
50 J18502 19 7 10⅞ 7-⅜ 128.5
12
100 J18992 18⅛ 6⅛ 12⅝ 9-⅜ 205.9
TOE JACKS
• Heat treated and chrome plated medium-carbon
steel cylinder
• Chrome plated ram promotes longer seal life and
optimum performance
• U.S. Patented by-pass device protects hydraulic
system from over traveling damage
Toe Saddle Head Saddle Hydraulic Base Size

Min. Height Max. Height Min. Height Max. Height Lifting (L x W)
(tons) Number (lbs)
3 J13060 0.62 5.75 9.0 14.12 5.12 6.00 x 4.37 36.1

6 J13120 0.88 6.00 10.50 15.63 11.00 x 7.50 55.0
5.13
10 J13200 1.13 6.25 11.00 16.13 11.63 x 9.00 84.0
MINI JACKS
• Low profile mini jack
• Pocket size and lightweight
• Convenient for storage
Interchangeable saddle
Minimun Maximum Hydraulic Base Size

Height Height Lifting (L x W)
(tons) Number (lbs)
(in) (in) (in) (in)
5 J11050 2.37 3.13 0.76 4.6
4.13 x 4.00
5 J11055 3.37 4.88 1.51 5.3
10 J11100 4.75 6.25 1.63 4.88 x 4.38 12.5
20 J11200 5.13 6.75 1.63 5.38 x 4.75 16.7
HYDRAULIC BENCH VISE • 5 Tons of clamping power

• Hands free operation with foot pump control
• Air control valve for variable speed and added
safety
• Cast steel construction 52,600 psi tensile strength
• Operates horizontally or vertically
• Jaws open 8 inches
• Replaceable jaw plates
• Hydraulic pressure closes jaws
• Spring return opens jaws
Model BV859A includes:

• 5 Ton hydraulic vise
• Air over hydraulic 10,000 psi foot
pump with air control valve
• 10,000 psi gauge
• Gauge adapter
• 10 foot hydraulic hose
• Set of POSI LOCK® Hold-Et’s
(magnetic vise clips)
Diemension (in)
Base
Base
Model Capacity Closed Exterior Extended to Interior Weight
Jaw Body Base to Jaw Jaw
Number (tons) Overall Side Overall Top of Slide (lbs)
Width Height Width Cylinder Clearance Opening
Length Width Length Jaw Height
Length
Height
BV859A 5 18.78 2.75 8.00 26.78 5.94 9.66 15.58 7.94 2.50 3.50 8.00 70
32 1-888-332-6419
A
A
SADDLES
5°
5°
B
B
B
D
B
D
D
D
D
C
C C
SD Series C SDT10 C HTD10 A
A
A
For use with Cylinder Capacity Dimensions (in)
Saddle Type Model Number
(ton) A B C D
SD05 5 0.98 0.67 0.81
0.24
SD10 10 1.38 0.87 1.06
Grooved
SD15 15 1.50 0.87 1.18
0.28
SD25 25 1.97 1.42 1.14
SDT05 5 0.98 0.67 0.67 1.22
SDT10 10 1.38 0.63 0.87 1.50
Tilt SDT15 15 1.5 0.74 0.87 1.57
SDT25 25 1.97 0.73 1.4 1.6
SDT55 55 2.76 1.29 2.8 -
Threaded HTD10 10 1 ¼″-11.5NPTF 0.95 1″-8UNC 1.77
CLEVIS EYES F F
D D
A
A E
E
B C
B C
CEP Series
Plunger CEB Series Base
D
B A
F
G E
C
CED Series CP10
Dimensions (in)
For use with
Clevis Model
Cylinder Capacity
Type Number A B C D E F G
(tons)
5 CEP05 ¾″-16UNF 1.13 2.25 0.63 0.62 0.56 -

10 CEP10
Plunger 1″-8UNC 1.69 3.31 0.88 0.75 1.00 -
15 CEP15
25 CEP25 1½″-16 2.25 3.81 1.25 0.87 1.50 -
5 CEB05 1.52 1.75 2.13 0.63 0.26 1.13 -
10 CEB10 2.28 2.50 2.87 0.88 1.69 0.32 -
Base
15 CEB15 2.77 3.00 2.87 0.88 1.69 0.38 -
25 CEB25 3.40 3.75 3.37 1.25 2.25 0.56 -
9 CED09 1 1 1-11/16″-18 0.75 1.31 0.94 ¾″- 16
Plunger & Base 16 CED16 1.25 1 2-3/16″-16 1 1.88 1.19 1⅛″ 12
HP1006 only CP10* M30x2 2.95 6.30 1.18 3.74 1.38 2.56
* 2-pc set with an adapter
HYDRAULIC PRESSURE GAUGES
Graduation
Face Pressure Range
Gauge Model Thread Major Minor Major Minor
Diameter
Type Number (in) Graduation Graduation Graduation Graduation
(in) (psi) (bar)
(psi) (psi) (bar) (bar)
GD2514 2.50 1,000 100
Dry
GD4014 4.00 2,000 200
¼″-18NPTF 0-10,000 0-700 100 10
GW2514 2.50 1,000 100
Wet
GW4014 4.00 2,000 200
B
GAUGE ADAPTER
C
D E F
Dimensions
Model (in)
Number
A B C D E F
CF3814 5.12 1.38 ¼″-18NPTF ⅜″-18NPTF ⅜″-18NPTF 1.25
BASES
For use with Dimensions
Cylinder Model (in)
C
Capacity Number
(tons) A B C D
D 5 CB05 0.32 4.65 7.87 1.54
C
10 CB10 0.39 4.72 9.06 2.28

B
15 CB15 0.47 4.80 10.00 2.76
A
25 CB25 0.63 4.96 11.02 3.41
PLATES FOR ALUMINUM CYLINDERS

For use with Dimensions (in)
Cylinder Model
Capacity Number Length Width Thickness
(tons)
30 Z030 6.00 6.00 0.50
50 Z050 7.50 7.50 0.50
HYDRAULIC HOSES Hose

I.D.
(in)
Model Number
Hose End
Fittings
Operating
Pressure
(psi)
Hose Length
(ft)
Weight
(lbs)
CS1414 ¼″-18NPTF 6 2.5

CS3814 6 3.0
CS3814A 2 2.0
¼″
CS3814B ⅜″-18NPTF 3 2.2
CS3814C 10 5.0
10,000
CS3814D 20 10.5
CS1438 ¼″-18NPTF 6 3.2
CS3838 6 3.5
⅜″
HYDRAULIC OIL CS3838C

CS3838D
⅜″-18NPTF 10
20
6.5
13.5
Viscosity Viscosity @ Viscosity @ Flash Pour

Volume Model ASTM API
Index 100°F 210°F Point Point
(gal) Number Grade Gravity
(min) (S.U.S.) (S.U.S.) (°F) (°F)
1 F01 144 234 53 215 403 -33 30.8
34 1-888-332-6419
MANIFOLDS
CM14
CM7 2" 3"
3/8"-18NPTF(7X) 3.5"
0.25"
1.25" 0.25"
3.25" 8"
0.25"
3/8"-18NPTF(7X) 0.25" 7.25"
1.25"
1.25"
1.25"
1.25" 1.5" 1.5" 1.5" 1.25" 4" 4" 4"
7" 1.25"
14.5"
CMH6
1/4"-20 UNC
0.25"depth(2x)
MFC2 MFC4
2"
3/8"-18NPTF(6X)
1.5"
0.82"
1.63"
Manifold Type Model Number Number of Ports Port Size Mounting Hole
6-Port Hexagon Manifold CMH6 6
7″ Long Manifold CM7 7 ¼″-20UNC
14″ Long Manifold CM14 7 ⅜″-18NPTF
Manifold with Two Needle Valves MFC2 3 4.4
Manifold with Four Needle Valves MFC4 5 10.1
PRESSURE SWITCH
• Automatically shuts off electric pump when predetermined
system pressure is reached
Model Adjustable Pressure Weight
Electrical Rating Port Size
Number Range (lbs)
CVS1 1,000~10,150 psi 15 amp @ 250V max ¼"-18NPTF 1.32 CVS1
PUMP MOUNTED MANIFOLD BLOCK

• Converts BVA pumps with pump mounted
valves for use with remote mounted valves
• Comes with 4 pieces mounting screws
CMR2
PRESSURE COMPENSATING
FLOW CONTROL VALVE
• Primarily used in material compression and tensil testing
such as soil, rock, concrete, asphalt, and others
PW34M
Model Valve Weight
Valve Type Use with Cylinder Hydraulic Symbol
Number Operation (lbs)
3-way 4-position, 8.71

PW34M Manual Single Acting
Tandem Center
PUMP MOUNTED VALVES
2.97" 6.37"
2.97" 6.37"
4.10"
4.10"
0.93"
0.93"
2.31"
1.75" 2.31"
1.75"
4.63"
4.63"
PW2 PW33L
6.13" 5.66"
3.84"
0.93"
3.25"
1.75"
4.63"
PW3 & PW4 PW43L

Valve Use with Model Weight
Valve Type Hydraulic Symbol Schematic Flow path
Operation Cylinder Number (lbs)
A A
A
3-way,
PW2 - 4
2-position
P T P T P T
Single
Acting
3-way, AB
A A A
3-position,
PW3 4
Tandem
Center P T P T P T
P T
4-way, AB
A B
A B
A B
3-position, Double
Manual PW4 3
Tandem Acting
Center P T P T P T P T
3-way, A
A A
A
3-position,
Single
Tandem PW33L 5.95
Acting
Center P T P T
P T
Locking P T
4-way, A B
A B A B
A B
3-position,
Double
Tandem PW43L 5.95
Acting
Center, P T P T
P T
Locking P T
SOLENOID VALVE
Use With Model Valve Valve Weight

Hydraulic Symbol Schematic Flow path
Cylinder Number Type Function (lbs)
A
Advance/ A
Single Solenoid
A A
PS33L Hold/ 7.0

Acting 115VAC
Return P T P T P T
P T
36 1-888-332-6419
CH38 E C H D C
Industrial Hydraulic Equipment F J

G
A
B
HYDRAULIC COUPLERS CFS38 EC H D C
J
G
F
CH38
A
CR38
A
B
D B
D
C
CH38 E C H D C
CR38 E C H D
F J
G J
F G
CFS38 A
B CRZ14 A
D B
CFS38 EC H D C
CRZ14 E C H D C
J
G J G
F
F
D B
Model Number C Dimensions (in)
Coupler Type
CompleteE Set
CR38 C Male Half
H D Female Half A* B C D E F G H J
High-Flow J
CH38 F CH38M CH38F
G 3.35 2.84 ⅜″-18NPTF 1-3/16″-16 1.10 0.94 1.00 0.75 0.63
Coupler
A
Flush-Face D B
CFS38 CFS38M CFS38F 4.36 2.85 ⅜″-18NPTF 1.19 1.21 1.06 1.12 0.79 0.63
Coupler
CRZ14 E C H D C
Regular-Flow
CR38 CR38M
J CR38F 3.15 2.20 ⅜″-18NPTF 15/16″-20 1.04 0.94 0.73 0.50 0.53
Coupler F
G
Zinc Coupler CRZ14 CRZ14M CRZ14F 2.42 1.67 ¼″-18NPTF 13/16″-20 0.95 0.83 0.58 0.39 0.35
* Value A is total length when male and female couplers are connected.
FLOW CONTROL VALVES
CVN1 &CVN3 CVR3 CVC3

2.52"
1.73" 3/8" - 18NPTF

3.05"
3.48"
Ø 1.5"
1.26"
3/8"-18NPTF 3/8"-18NPTF
2.52" 4.53"
1.45"
7.44" 1.45" 3.88"
Valve Model
Ports Application Hydraulic Symbol
Type Number
CVN1 ¼″-18NPTF
Controls cylinder speed and acts as temporary shut-off valve
Needle Valve
CVN3 ⅜″-18NPTF for load holding
Check Valve CVC3 ⅜″-18NPTF Allows flow in one direction only
Controls pressure developed by the pump in hydraulic loop.

Pressure
CVR3 ⅜″-18NPTF By-pass occurrs when pre-set pressure is reached. Turns
Relief Valve
clockwise to increase pressure,counter clockwise to decrease
REMOTE MOUNTED
DIRECTIONAL
CONTROL VALVES
PR33, PR33C PR33CL PR33L
PR43C
PR43L
PR33 PR43, PR43C PR43CL
Valve Use With Model Weight
Valve Type Hydraulic Symbol Schematic Flow path
Operation Cylinder Number (lbs)
T T T
3-way, A
3 position, A A A
PR33 3.53
Tandem
center P T
P P P
T T T
3-way, A A A A
3 position, PR33C 3.53
Closed center P T
P P P
Single
Acting A T T T
3-way,
3 position, A A A
Tandem PR33L 5.73
center,
Locking P T P P P
A T T T
3-way,
A A A
3 position,
PR33CL 5.73
Closed center,
Locking P
P T P P
Manual T T T
4-Way, AB
3 position, A B A B A B
PR43 3.53
Tandem
center P T
P P P
4-Way,
3 position,
Tandem PR43L 5.73
center,
Locking
Double
Acting T T T
4-Way, AB A B A B A B
3 position, PR43C 3.53
Closed center P T
P P P
T
T
4-way, T
3 position, A B A B
A B
Tandem, PR43CL 5.73
Closed center,
Locking P P
P
38 1-888-332-6419
FITTINGS
Dimension
Model
Fitting Type A B
Number C D
(in) (in)
Adaptor
Adaptor
½″-14 Female ⅜″-18 FT108 1.69 1.14 Female ½″-14NPTF Male ⅜″-18NPTF B A
Male - NPTF
Adaptor
½″-14 Female ¼″-18 FT118 1.69 1.14 Male ¼″-18NPTF Female ½″-14NPTF D C
Male - NPTF
Bushings
Bushing CB1438 0.87 0.67 Male ⅜″-18NPTF Female ¼″-18NPTF B A
D C
Bushing CB1412 1.10 0.87 Male ½″-18NPTF Female ¼″-18NPTF
Connectors
B A
2 way 90° Connector
Street Elbow, FT101 1.81 1.02 Female ⅜″-18NPTF Male ⅜″-18NPTF
⅜″ to ⅜″-NPTF
D C
B A
2 way 90° Connector
Elbow, FT107 1.40 1.02 Female⅜″-18NPTF Female ⅜″-18NPTF
⅜″ to ⅜″ - NPTF
D C
B A
3 Way Connector
FT106 1.77 1.02 Female ⅜″-18NPTF Female ⅜″-18NPTF
D C
B A
4 Way Connector
Cross, FT105 1.77 1.02 Female ⅜″-18NPTF Female ⅜″-18NPTF
D C
Couplings
Coupling
Reducing Connector, ⅜″ FT102 1.18 1.02 Female ¼″-18NPTF Female ⅜″-18NPTF
to ¼″-NPTF B A
Coupling
Reducing Connector, ½″ FT112 1.89 1.14 Female ½″-14NPTF Female ⅜″-18NPTF
to ⅜″ - NPTF D C
Coupling
FT103 1.18 1.02 Female ⅜″-18NPTF Female ⅜″-18NPTF
⅜″ to ⅜″- NPTF
Fitting
B A
Fitting CA3814 1.38 0.91 Male ¼″-18NPTF Female ⅜″-18NPTF
D C
Male Connectors
Male Connector
Hex Nipple, FT104 1.50 0.67 Male ¼″-18NPTF Male ¼-18NPTF
¼″ to ¼″ - NPTF B
A
Male Connector
Hex Nipple, FT114 1.50 0.75 Male ⅜″-18NPTF Male ⅜″-18NPTF
⅜″ to ⅜″- NPTF
D C
Male Connector
Hex Nipple, FT124 1.45 0.75 Male ¼″-18NPTF Male ⅜″-14NPTF
¼″ to ⅜″- NPTF
BVA cross reference chart
Ton BVA ENERPAC Power Team Simplex Ton BVA ENERPAC Power Team Simplex Ton BVA ENERPAC Power Team Simplex
Single Acting Cylinders Threaded Cylinders Hollow Hole Cylinders

H0500 RC-50 NA R50 HT1006 NA C106CBT NA HC1201T RCH-120 RH120 RC120
10
H0501 RC-51 C51C R51 HT1010 NA C1010CBT NA HC1202T RCH-121 RH121 RC121
12
H0503 RC-53 C53C R53 Aluminum Cylinders HC1202XT RCH-1211 RH121T RC1211
5
H0505 RC-55 C55C R55 HU3002 RAC-302 RA302 NA
HC1203XT RCH-123 RH123 RC123
H0507 RC-57 C57C R57 30 HU3004 RAC-304 RA304 NA
HC2002T RCH-202 RH202 RC202
H0509 RC-59 C59C R59 HU3006 RAC-306 RA306 RAS306B 20
HC2006T RCH-206 RH206 RC206
H1001 RC-101 C101C R101 HU5002 RAC-502 RA552 RAS502A
HC3002T RCH-302 RH302 RC302
H1002 RC-102 C102C R102 HU5004 RAC-504 RA554 NA 30
50 HC3006T RCH-306 RH306 RC306
HC6003T RCH-603 RH603 RC603
H1006 RC-106 C106C R106 HU5010 RAC-5010 RA5510 NA 60
10 HC6006T RCH-606 RH606 RC606
H1008 RC-108 C108C R108 HU7504 NA NA NA
75 100 HC10003T RCH-1003 RH1003 RC1003
H1010 RC-1010 C1010C R1010 HU7506 NA NA NA
Lock Nut Cylinders
HLN5502 CLL-502 R552L RLN502
100 HU10006 RAC-1006 RA1006 RAS1008A
H1014 RC-1014 C1014C R1014 HLN5504 CLL-504 - NA
HU10010 RAC-10010 NA NA
H1501 RC-151 C151C NA HLN5506 CLL-506 R556L RLN506
Low Profile Cylinders 55
H1502 RC-152 C152C R152 HLN5508 CLL-508 - NA
10 HL1001 RCS-101 RSS101 RLS101
H1504 RC-154 C154C R154 HLN5510 CLL-5010 R5510L RLN5010
20 HL2002 RCS-201 RSS202 RLS201
H1506 RC-156 C156C R156 HLN5512 CLL-5012 - NA
15 30 HL3002 RCS-302 RSS302 RLS302
50 HL5002 RCS-502 RSS502 RLS502
H1510 RC-1510 C1510C R1510 HLN10004 CLL-1004 - NA
100 HL10002 RCS-1002 RSS1002 RLS1002
Flat Body Cylinders
100
H1514 RC-1514 C1514C R1514 HLN10008 CLL-1008 - NA
HF0503 RSM-50 RLS50 NA
H2501 RC-251 C251C R251 5 HLN10010 CLL-10010 R10010L RLN10010
HF0503B
NA NA NA
kit
H2502 RC-252 C252C R252 HLN10012 CLL-10012 - NA
HF1005 RSM-100 RLS100 RFS10
H2504 RC-254 C254C R254 Double Acting Cylinders
10
HF1005B
H2506 RC-256 C256C R256 NA NA NA
kit HD1010 RR-1010 RD106 RDA1010
25
10
H2508 RC-258 C258C R258 HF2005 RSM-200 RLS200 RFS20
HD1012 RR-1012 RD1010 NA
20
H2510 RC-2510 C2510C R2510 HF2005B
NA NA NA HD3008 RR-308 RD256 RDA308
kit
H2512 RC-2512 C2512C R2512 30
HF3005 RSM-300 RLS300 RFS30 HD3014 RR-3014 RD2514 RDA3014
H2514 RC-2514 C2514C R2514 30
HF3005B
NA NA NA HD5506 RR-506 RD556 RDA556
30 H3008 RC-308 NA R308 kit
50 HF5006 RSM-500 RLS500S RFS50 55 HD5513 RR-5013 RD5513 RDA5512

H5502 RC-502 C552C R552
75 HF7506 RSM-750 RLS750S RFS75
H5504 RC-504 C554C R554 HD5520 RR-5020 RD5518 RDA5523
55
100 HF10006 RSM-1000 RLS1000S RFS100
H5506 RC-506 C556C R556 HD7506 RR-756 RD8013 NA
150 HF15006 RSM-1500 RLS1500S RFS150 75
H5513 RC-5013 C5513C R5513
HD7513 RR-7513 - NA
Pull Cylinders
H7506 RC-756 C756C R756
75 2 HP0205 BRC-25 RP25 RP25 HD10006 RR-1006 RD1006 RDA1006
H7513 RC-7513 C7513C R7513 100
5 HP0505 BRC-46 RP55 RP55 HD10013 RR-10013 RD10013 RDA10012
H10006 RC-1006 C1006C R1006
100 10 HP1006 BRC-106 NA NA
H10010 RC-10010 C10010C R10010
BVA ® is a registered trademark of SF Companies.
Enerpac® is a registered trademark of the Actuant Corporation.
Power Team® is a registered trademark of SPX Corporation.
For comparison purposes only. Products are not identical. Simplex® is registered to Templeton, Kenly & Co., Inc.
40 1-888-332-6419
BVA cross reference chart

BVA ENERPAC Power Team Simplex BVA ENERPAC Power Team Simplex BVA ENERPAC Power Team Simplex
Hand Pumps Electric Pumps with Solenoid Valve FT108 FZ-1634 - -
(Double-Acting)
P601S P-39 P23 P41 FT118 FZ-1633 - -
PESM0501T - - PES2041
P1201S P-391 NA NA Spreaders
PESM0502T PER-1401B - PES2042
P350 P-142 P19 P42 SR05 NA HS2000 S2000
PESM1002T - - PES3042
P-202 P42 SR10 WR-5 NA NA
P1000 P59
P-392 P82 PESM1503T ZU4408SB PE464S PES4042
Hoses
P-84 P140 PESM1505T ZU4420SB PED254S PES4065
P2001 P157 CS1414 H-9206Q - -
P-80 P82
Rotary Air Pumps
CS3814 H-9206Q 9756 H6
P2301 P-80 P159 P82 (Single-Acting)
CS3814A H-9202 - -
P4301 P-801 P300 P230 PARD1701 ZA4204MX - -
CS3814B H-9203 9755 H3
P8701 P-462 P460 P461 PARD1703 ZA4208MX - -
CS3814C H-9210 9758 H10
P2301M P-84 P157D P230D PAR1703 - - PAM4032
CS3814D H-9220 9760 H20
P8701M P-464 P460D P461D PARD4001 - - -
CS1438 - - -
P240L P-18 P23 P20 PARD4003 - PA464RA -
CS3838 H-9306 9776 HD6
Air Pumps PAR4003 - PA554 -
CS3838C H-9310 9777 HD10
PA600 PA-133 PA9 - Rotary Air Pumps
(Double-Acting) CS3838D H-9320 9778 HD20
PA600H NA PA9H -
PARM1703 ZA4410MX - PAM4032 Hydraulic Couplers
PA1500 PATG-1102N PA6 PA91
PARM4003 - PA554 - CH38 C-604 9795 C209
PA1500L PARG-1102N PA6R -
Gas Pump CFS38 F-604 9794 C509
PA1500M NA PA6DM PA91D
PG5505 PGM-5320R PG1203 PGM4045 CR38 A-604 - -
PA2000 PATG-1102N NA -
Control Valves CRZ14 A-630 - CT200
PA91-1
PA3801 PATG-1105N PA6
PA95-1 PW33L VM33L 9520 VPL3 Gauges
PA3801L NA NA PA91-1R PW43L VM43L 9506 VPL4 GD2514 - 9041 -
PARD1701 NA PA172 NA PR33 VC-3 - VR3 GD4014 - 9040 -
PARD1703 NA PA174 NA PR33C VC-15 - VR3CC GW2514 G2535L 9051 G5
Electric Pumps PR33L VC-3L - - GW4014 G4088L 9052 G7
PEM1041 PR33CL VC-15L - - Clevis Eyes
PEM-1301B
PE0501 PE304 PEM2031
PUJ-1401B PR43 VC-4 9509 VR4 CEP05 REP-5 350095 BCR5
PEM2041
PR43C VC-20 9508 VR4CC CEP10 REP-10 350094 BCR10
PE304-2 PEM3032
PE1002 PEM2042
PE303-2 PEM3042 PR43CL VC-20L - - CEP15 REP-10 350094 BCR15
Custom Order PEM4032 Shop Presses CEP25 REP-25 420059 BCR25
PE1503 GPEM-3210B
PE55 Series PEM4042
IMP2506 IPH-2531 SPM2514 IMS256 CEB5 REB-5 350096 NA
Custom Order
PE1505 GPEM-3320B PEM4045 IAP2506 IPA-2520 SPA2514 IAS256 CEB10 REB-10 350097 BC10
PE55 Series
Custom Order PEM5035 IAP5506 IPA-5021 SPA556 - CEB15 REB-15 350098 BC15
PE3005 GPEM-5320G
PE120 Series PEM5045 IEP5506 IPE-5005 SPE556 IES556 CEB25 REB-25 420061 BC25
Electric Pumps with Pendant Switch IMP5506 IPH-5031 SPM556 IMS556 Saddles
PPM1041 IAP5513 IPA-5073 - - SD05 A-53G 25746 NA
PUJ-1401B PE183
PEW0501 PPM2031
PUD-1301B PE174 IEP5513 IPE-5060 SPE5513 IES5513 SD10 A-102G 31772 MK10
PPM2041
PUJ-3309B PE304R PPM3032 IEP10010 IPE-10010 SPE10010 IES10010 SD15 A-152G 31772 -
PEW1002
PUJ-3409B PE184-2 PPM3042 Fittings SD25 A-252G 31776 85525
PE462 PPM4032 FT101 FZ-1616 9681 F9
PEW1503 GPEM-3310B SDT10 CAT-10 - ATS10
PE464 PPM4042
FT102 FZ-1615 9685 - HTD10 A-102F 202179 -
Custom Order PPM5035
PEW3005 GPEM-5320G FT112 FZ-1625 - -
PE120 Series PPM5045
Electric Pumps with Solenoid Valve FT103 FZ-1614 9680 F13 To view complete cross over list go to
(Sing-Acting)
FT104 FZ-1608 9684 - www.bvahydraulics.com
PES0501T - PE172S PES2031
FT114 FZ-1617 9683 F1
PES0502T PER-1301B - PES2032
FT105 FZ-1613 9698 F15
PES1002T - PE302S-2 PES3032 For comparison purposes only. Products are not identical.
FT106 FZ-1612 9695 F11
PES1503T ZU4308SB PE462S PES4032
FT107 FZ-1610 9686 F7 BVA ® is a registered trademark of SF Companies.
PES1505T - - PES4035 Enerpac® is a registered trademark of the Actuant Corporation.
Power Team® is a registered trademark of SPX Corporation.
Simplex® is registered to Templeton, Kenly & Co., Inc.
BasiC system set-ups
Single Push Application
Single Acting Cylinder CS3814 GW4014 P1000
6’ Hydraulic Hose Pressure Gauge Hand Pump
H1006
CH38M CF3814
Male Coupler Gauge Adapter
Single Acting Cylinder with longer strokes

Single Acting Cylinder GW4014 PA1500
Pressure Gauge Foot Pump
CS3814
6' Hydraulic Hose
H1010
CH38M CF3814
Male Coupler Gauge Adapter
GW4014 PE0501T
Double Acting Cylinder Set-up
Pressure Gauge Electric Pump
CS3814
CH38M
6’ Hydraulic Hose
Male Coupler
Double Acting Cylinder
CF3814
Gauge Adapter
HD5506
FT114 CVN3
Male Connecter Needle Valve
Cylinder Plunger Speed

Formula V=A/Q
Cylinder
Cylinder Effective Area (in²) 60 (sec)
Plunger = ×
Speed (sec/in) Oil Output Flow Rate (in³/min) 1 (min)
Force Key to measurements

Formula F=P×A Weight: Other measurements:
1 pound (lb.) =0.4536 kg 1 in =25.4 mm
Force Hydraulic Working Cylinder Effective
(lbs) = Pressure (lb/in²) × Area (in²) 1 kg =2.205 lbs 1mm =0.039 in
1 ton (short, US) =2000 lbs 1 in² =6.452 cm²
1 ton (metric) =2205 lbs 1 cm² =0.155 in²
Cylinder Oil Capacity
Oil Capacity Cylinder Cylinder Stroke Volume: Pressure:
(in³)
= Effective × (in) 1 in³ =16.387 cm³ 1 psi (lb/in²) =0.69 bar
Area (in²)
1 cm³ =0.061 in³ 1 bar =14.5 psi
1 liter =61.02 in³ 1 kPa =0.145 psi
Cylinder Effective Area
=0.264 gal (US)
1 gal (US, liquid) =3.785 liter Temperature:
Cylinder (Cylinder Bore Diameter)²
Effective = ¶ × =231 in³ 0°F =(0°C x 1.8)+32
4
Area =3785 cm³ 0°C =(0°F - 32) ÷ 1.8
where,¶ = 3.14159
42 1-888-332-6419
Confidence Built on Quality

• ISO 9001
BVA products are manufactured through an International Quality Assurance System,
ISO 9001 which involves consistent observation of administration, management,
manufacturing, and production control. Under this system, the related operations are
monitored on all aspects of the production of BVA products from the purchase order, the
assembly line, to shipping the order from the distribution center.
Products comply with the following industry standards
• ASME B30.1
The cylinders comply with load testing requirements and / or the safety factor for
material yield strength, while still functioning properly and without oil leakage.
(Except HPD and HLN series)
• ANSI B40.1
Under ANSI standards, BVA pressure gauges meet criteria for grade A
• SAE 100
BVA hydraulic hoses comply with the Material Handling Institute’s specification of
minimum life cycles and minimum burst pressure rating.
Kansas City, MO
Sales, Marketing, Engineering, and Distribution
Limited Lifetime Warranty
BVA Hydraulics warrants this product to be free from defects in material and workmanship for the life of the product. This
warranty applies to the original purchaser (end user) only and is not transferable. Damaged components, including bent
rams, dented or crushed cylinder walls, broken welds, couplers as well as worn out seals, O-rings and springs are the
result of misuse, misapplication or a combination of both. As well, normal wear shall not constitute a defect and shall not be
considered for warranty credit. We have complete confidence that the BVA Hydraulics product you purchase will meet or
exceed your performance requirement. However, in the unlikely event that a BVA Hydraulics product fails due to material or
workmanship defect you may contact SFA Companies for disposition. Except where such limitations and exclusions are
specifically prohibited by law, the consumer’s sole and exclusive remedy shall be the repair or replacement of the
defective product. BVA Hydraulics shall not be liable for any consequential or incidental damage or loss whatsoever. Any
and all expressed and implied warranties, including without limitation, any warranties of merchantability and fitness for a
particular purpose, are limited to the original purchaser. Some States do not allow the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you. This warranty gives you specific legal rights. You may also have
other rights which vary from state to state.
Global Locations
USA , Canada, Mexico , Central & South America
10939 N. Pomona Ave.
Kansas City, MO 64153
Tel. 888-332-6419, 816-891-6390
Fax.816-891-6599
Email: [email protected]
EUROPE AUSTRALIA
Tussenrimer 20, 4704 SR Roosendaal 15 Viewtech Place
The Netherlands Rowville 3178, Victoria
Tel. 31-165-583-300 Australia
Fax. 31-165-583-310 Tel. 61-3-9755-8277
Email: [email protected] Fax. 61-3-9755-8219
JAPAN ASIA
O’s 520 ATC bldg. 2-1-10 Nanko Kita, 7F., NO.408 Ruei Guang Road
Suminoe-Ku, Osaka 559-0034 Nei Hu District, Taipei City 114
Japan Taiwan R.O.C.
Tel. 81-06-6614-9714 Tel. 886-2-8751-7888
Fax. 81-06-6-6614-9711 Fax. 886-2-8751-7999
Email: [email protected]
BVA Distributor:
Built To Last
DB-AUG09A
www.bvahydraulics.com

BVA Hydraulics Catalog

Uploaded by

Copyright:

Available Formats

BVA Hydraulics Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BVA Hydraulics Catalog

Uploaded by

Copyright:

Available Formats

Industrial Hydraulic Equipment Built To Last

Cylinders 3-17 Maintenance Kits 29

SINGLE ACTING CYLINDERS

Heavy duty, heat treated, grooved

Collar fixture threads

Cylinders are burnish rolled for a smooth

One piece steel ram stopper for extra strength

One piece high grade alloy bearing

• Limited Lifetime Warranty

• Limited Lifetime Warranty

Collar Plunger Plunger Base Mounting Hole

• Limited Lifetime Warranty

* Note: BVA will build any cylinder to

Base Mounting Hole

Base to Top to Plunger Plunger Collar Base Mounting Hole

Base to Top to Base Mounting Hole

Base to Top to Collar Plunger Plunger Base Mounting Hole

LOW PROFILE CYLINDER KIT

LOW PROFILE CYLINDERS

Low profile cylinders are great for confined spaces

Cylinder Oil Collapsed Adapter Dimensions

I 0.39 0.81 1.46 0.28

I 0.39 1.08 1.93 0.39

I 0.39 1.32 2.06 0.39

Lightweight, yet powerful

Collar Thread Base Base Mounting Hole

LOCK NUT CYLINDERS

Depth Saddle Base

Internal Base Collar

PULL CYLINDERS • High strength steel construction

Internal Cylinder Top to Collar

Adapter Plunger Base Mounting Hole

1 SR10 1.09 0.86 3.90 6.57 0.47 2.17 2.20 4.8

BEAD BREAKER J22953 Bead Breaker Combo

Maximum Hydraulic Oil Product Size Weight

5 Ton J22910 26″ 250 mL 17-½″ X 5-½″ X 12″ 36

Air pumps can be used in a variety of

Usable Oil Output Input Air Dimensions (in)

91.5 PA1500 66 11 10.35 5.00 7.28 5.16 5.35 18.1

REMOTE CONTROL AIR PUMPS

Usable Oil Output Input Air Dimensions (in)

91.5 PA1500L 61 10 10.98 6.30 8.03 5.12 5.35 19.4

DOUBLE ACTING AIR PUMP

Usable Oil Output Input Air Dimensions (in)

Usable Oil Output Input Air Dimensions (in)

PA600 6.18 5.59 14.1

ROTARY AIR PUMPS

PARD1703 44 93 - 11.95 8.35 7.28 12.01 12.34 17.96 54 600

PARM4003 95 100 13.55 10.53 8.21 7.28 12.1 12.34 18.52 67

PAR1703 & PARM1703 PARD1701 & PARD1703

Oil Output Dynamic

SINGLE SPEED METAL HAND PUMPS

Single Single 36.5 P601S 0.15 109 0.79 13.0

Model Dimensions (in)

TWO SPEED ALUMINUM HAND PUMPS

Single Two 21.4 P350 0.18 0.05 88 0.38 ¼″-18NPTF 6.6

Model Dimensions (in)

P1201 P2001 P2301

• Two speed operation increases productivity H J

• Internal pressure relief valve for over load G