Separation

Design
Software

Areas of application of MySep:

How can I use MySep?
MySep is set up such that the user is effectively guided through the design steps in the most efficient
manner. At the same time, all aspects of the design are accessible at any time.

The effects of user input on key aspects of the design (e.g. droplet sizes, performance, residence times,
etc) are calculated immediately and shown to the user in real-time. This allows fast optimisation of
the design. MySep has built-in correlations for prediction of mist fractions, droplet size distribution
and separation efficiencies at the various separation stages within the vessel. Nonetheless, the user

Description

has the possibility to override these predictions. By entering overriding values and reviewing the
effect on overall performance, the user obtains insight in the sensitivity of the design.

MySep is a computer software program that enables the user to design (sizing) or evaluate (rating)
separators and scrubbers in detail, right down to the selection of suitable separation internals. MySep
can be used independently, but also in conjunction with process modelling tools used to simulate
entire flow schemes, such as Hysys, Petro-SIM and UniSim Design. With the output from these
process simulations, each vessel can be designed in detail using MySep. MySep effectively enables
the user to determine vessel sizes, select internals and assess the associated overall performance
of each vessel.
Furthermore, MySep can also be used to evaluate an existing design and determine its theoretical
performance based on actual operating data.

What is the power of MySep?

MySep answers questions and increases efficiency for both the design engineer and his company.
To name a few:
Predict and assess the performance of new and existing separators. Be in the know.
Reduce engineering hours and costs
Avoid re-engineering
Mitigate risk

[email protected]

www.mysep.com

MySep is available in two license types:

Inlet section

1) Standalone license version, for use on a single computer.

Nozzle size, velocity and momentum calculation

Inlet device selection: half pipe, vane type,

2) Network license version, for concurrent use on multiple computers on a network.

MySep adds value to your project, from Conceptual Design to daily Operations. It is all about you
being in control of the design, its performance and consequently your peace of mind.

inlet cyclones

Liquid levels
Direct input of liquid levels setpoints
Auto-calculation of level setpoints from height, volume and time requirements input

Features

Gravity separation section

Phase separation

Liquid from gas separation calculation (droplet size distribution based)

Gas - liquid separation

Oil droplet from water separation calculation

Liquid - liquid separation

Water droplet from oil separation calculation

Liquid - sand separation

Plate pack coalescer selection, dimensioning and performance

Phase inversion point predictions
Oil in water and water in oil outlet concentrations approximation

Input

Perforated distribution baffles design, pressure drop and level differences

Input up to 6 design and operating cases

Degassing bubble size calculation

Selectable input units (SI/metric and English/Imperial and combinations)

Sand separation calculations: carryover and deposition height profiles

Communicate directly with Hysys, Petro-SIM and UniSim Design

Import case data from Excel spreadsheet

Demisting section
Demisting device selection & performance predictions: Mesh pad, vane pack and cyclones

Inlet piping

Detailed geometrical parameters of equipment (e.g. mesh void fraction, wire diameter,

Droplet size distribution prediction

cyclone swirl angle, diameter, etc, etc) used in performance calculations.

Liquid entrainment fraction and flow rate prediction

Detailed design / sizing of demisting equipment

Flow regime map and data

Drain pipes design

Design layout
To-scale layout drawing of vessel, nozzles and internals
Setting / adjustment of nozzle and internals dimensions and layout

[email protected]

www.mysep.com

Pressure drop

External data processing

Prediction of pressure drop across nozzles, internals and vessel

Define your operating

Prediction and consideration of drainage head in equipment drain pipes

spreadsheet and have MySep run these cases and

cases

in

an

excel

return all the key operating and performance

parameters back to the spreadsheet

Other
Prediction of liquid in gas carryover and droplet size distribution
Option to override predicted droplet sizes and liquid loads (mist) at each separation step

Datasheet generation

Notifications if physical or equipment design limits are exceeded by user

Automatic generation or revision of vessel process datasheets

Possibility to use your companys Excel-based datasheet template

Automatic vessel sizing

Full automatic sizing of the vessel based on selected equipment and other optional criteria

Benefits for design engineers

Operating envelope

Predict and assess the performance of new and existing separators

Generation of graphical charts of a vessels

Separators are commonly designed using design standards that do not provide the capability to

operating envelope

determine the separation performance (e.g. liquid carryover in gas). As separation is the prime

Iso-carryover curves

function of separators, it is essential that this performance be predicted during design.

Operating limits
Custom point
Multiple indicators

Optimise the design

Chart controls

Being able to determine the performance of a separator opens up a host of benefits. For example, it
is now possible to optimise the separator design in terms of vessel size, nozzle sizes, internals type
selection and dimensions. Also, on a larger scale, the separation system can be optimised since the

Sensitivity analysis

performance of one separator will have effect on the performance of the downstream equipment.

Plotting of selectable parameters in a chart

Wide range of selectable operating parameters
Custom calculation ranges and number of points

Internals performance prediction

Chart controls

A key part of the vessel performance prediction is the performance prediction of the separation
internals in the vessel. These predictions are based on the actual geometry of the internals (typical
geometrical values are provided by default in MySep). This means that the design engineer no longer
needs to await or rely on vendors input for performance data. The design engineer can predict the
performance himself. In addition, he can in fact use MySep to verify vendors designs.

[email protected]

www.mysep.com

Visualisation

Datasheet generation

An important aspect in design work is to be able to assess the relative and physical meaning of

The creation of datasheets may traditionally be a tedious, time consuming exercise, with potential

design output numbers. For this, MySep provides graphical representation of detailed performance

of typing errors. With MySep, datasheets can be generated or revised automatically (using your

characteristics. Also, a to-scale layout drawing of the vessel and internals design is created, with the

Companys Excel-based datasheet template), complete with to-scale vessel sketch, within seconds.

possibility to adjust dimensions and layout.

Flexibility
MySep has been designed with the convenience and needs of the user in mind. This means that the
program is very flexible in terms of usage. For example, user can override predicted efficiencies and
droplet sizes with his own values; a useful feature for sensitivity analysis. Also, the level of detail the
user wishes to go into during design is completely at users discretion: from rough vessel sizing to
detailed internals design.

Auto-sizing
The auto-size feature allows the user to obtain an initial vessel size within a matter of seconds. This
can be used for vessel budget cost estimating purposes or as a starting point for further optimisation
of the design.

Operating envelope
With Operating Envelope a graphical map of a vessels performance can be generated. This gas vs
liquid flow rate chart shows iso-carryover curves as well as operating limits for the vessel. This
provides insights in off-design operating characteristics as well as vessel capacity limits that can be
input to e.g. production planning.

Sensitivity analysis

Comprehensiveness

Investigate the effect of operating parameters (e.g. liquid surface tension or liquid level) on vessel

The completeness of the capabilities and features of MySep provides the designer with one single

performance and other parameters. A wide range of selectable parameters are available for plotting,

convenient tool for the design and rating of separators.

to obtain more in-depth insight in the dependencies and sensitivities of the design.

[email protected]

www.mysep.com

Benefits for the users company

Time saving on design work

Risk mitigation

The consequence of the benefits for the design

Without prediction of separator performance one does not know what e.g. the carryover rate will be

engineer outlined above is that reliable vessel

and thus there is a risk of separator mal-performance and operating issues. The cost consequences

designs can be obtained much faster using

of a mal-performing separator are typically very large (shutdown, production loss, vessel entry, new

MySep. On top of this, the import process data

internals purchase). As MySep provides performance predictions, it can be a key tool for mitigation

from Hysys, Petro-SIM or UniSim Design feature

of this risk.

provides further time saving and eliminates risk

of typing errors in the input data.

Reduced dependency on equipment vendors

Avoid re-engineering

During project execution, oil companies and EPC contractors typically rely on vendor for vessel sizing

It is not uncommon that during some projects, re-engineering of separation equipment turns out to

and/or vessel performance estimates. With MySep, these companies can determine these matters

be necessary when for example during the Detailed Design phase of the project it is discovered that

in-house. This then results in less time spent on vendor communication, more detailed vessel and

vessel and internals size estimates determined during the FEED phase are actually not suitable. This

internal specifications can be provided to vendors during procurement. In addition vessel performance

costly exercise is avoided as MySep enables reliable and suitable vessel designs to be made during

feedback from vendors can be verified. All this results in time savings and more confidence in

the FEED stage.

the designs.

Cost savings
The optimisation capabilities outlined on the previous pages provide an excellent opportunity for

Production increase assessment

equipment cost saving. Vessels designed based on actual performance predictions can often be made

MySep can be used to assess the

smaller than vessels designed solely based on common engineering standards. A reduction in vessel

performance of existing vessels that are

size not only reduces the cost for the vessel, but it can also have a significant knock-on effect on the

in operation. This is not only useful during

overall project cost. Namely, smaller vessel sizes result in lower overall topsides weight, which can

daily operations and troubleshooting,

result in cost savings on the platform structure. This can result in significant reductions in the overall

but also when looking into increasing

project cost.

or maximising vessel throughput. In

effect, MySep can be used to determine
the achievable throughput / production

Budgeting accuracy

increase of a separator or entire system.

By using MySep in an early stage in the project (e.g. Conceptual and FEED phase), representative
vessel sizes can be swiftly obtained. Having reliable vessel sizes in an early stage in the project
means a more reliable and accurate project budget cost estimate.

[email protected]

www.mysep.com

MySep Pte Ltd

141 Cecil Street,
#02-03 Tung Ann Association Building
Singapore 069541

Telephone: +65 97770544

[email protected]
www.mysep.com

Company registration number 201329320G