Scribd
Upload
184 views15 pages

Active and Pasive Remote Sensing

Active remote sensing systems like radar and lidar transmit their own signals to gather information, unlike passive systems that rely on reflected or emitted energy from the sun or earth. Radar transmits microwave signals that penetrate clouds and vegetation canopies, and the strength of returned signals depends on surface characteristics like moisture content. Synthetic aperture radar improves resolution by combining signals from successive antenna positions. Lidar uses laser light to map ground surfaces and features with high vertical accuracy. Both find applications in environmental monitoring, hydrology, and other fields by providing all-weather observations of terrain and vegetation properties.

Uploaded by

Lindsay Soto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
184 views15 pages

Active and Pasive Remote Sensing

Active remote sensing systems like radar and lidar transmit their own signals to gather information, unlike passive systems that rely on reflected or emitted energy from the sun or earth. Radar transmits microwave signals that penetrate clouds and vegetation canopies, and the strength of returned signals depends on surface characteristics like moisture content. Synthetic aperture radar improves resolution by combining signals from successive antenna positions. Lidar uses laser light to map ground surfaces and features with high vertical accuracy. Both find applications in environmental monitoring, hydrology, and other fields by providing all-weather observations of terrain and vegetation properties.

Uploaded by

Lindsay Soto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

Active and Passive Microwave Remote Sensing

Passive remote sensing system record EMR that was reflected (e.g.,
blue, green, red, and near IR) or emitted (e.g., thermal IR) from the
surface of the Earth.

Atmosphere

Active and Passive Microwave Remote Sensing


Active remote sensing systems are not dependent on the Sun's EMR
or the thermal properties of the Earth. Active remote sensors create
their own electromagnetic energy that:
1. is transmitted from the sensor toward the terrain (and is largely
unaffected by the atmosphere),
2. interacts with the terrain producing a backscatter of energy, and
3. is recorded by the remote sensor's receiver.

The most widely used active remote sensing systems include:


Active microwave (RADAR= RAdio Detection and Ranging),
which is based on the transmission of long-wavelength
microwave (e.g., 3-25 cm) through the atmosphere and then
recording the amount of energy backscattered from the terrain.

The beginning of the RADAR technology was using radio


waves. Although radar systems now use microwave wavelength
energy almost exclusively instead of radio wave, the acronym
was never changed.

LIDAR (LIght Detection And Ranging),


which is based on the transmission of relatively shortwavelength laser light (e.g., 0.90 m) and then recording the
amount of light backscattered from the terrain;

SONAR (SOund NAvigation Ranging),


which is based on the transmission of sound waves through a
water column and then recording the amount of energy
backscattered from the bottom or from objects within the water
column.

RADAR (RAdio Detection and Ranging)


The ranging capability is achieved by measuring the time
delay from the time a signal is transmitted to the terrain until
its echo is received.

Radar is capable of detecting


frequency and polarization shifts.
Because the sensor transmitted a
signal of known wavelength, it is
possible to compare the received
signal with the transmitted signal.
From such comparisons imaging
radar detects changes in frequency
that form the basis of capabilities
not possible with other sensors.

Brief History of RADAR


1922, Taylor and Young tested radio transmission
cross the Anacostia River near Washington D.C.
1935, Young and Taylor combined the antenna
transmitter and receiver in the same instrument.
Late 1936, Experimental RADAR were working in the
U.S., Great Britain, Germany, and the Soviet Union.
1940, Plane-The circularly scanning Doppler radar
(that we watch everyday during TV weather updates to
identify the geographic locations of storms)
1950s, Military began using side-looking airborne
radar (SLAR or SLR)
1960s, synthetic aperture radar (SAR)
1970s and 1980s, NASA launched SARs, SEASAT,
Shuttle-Imaging Radar (SIR)
1990s, RADARSAT

Advantages:
Pass through cloud, precipitation, tree canopy, dry surface
deposits, snow
All weather, day-and-night imaging capacity

Side-Looking (Airborne) Radar (SLAR or SLR)

Synthetic Aperture Radar


(SAR)

The principal disadvantage of


real-aperture radar is that its
resolution is limited by antenna
length.
SAR produce a very long
antenna synthetically or
artificially by using the forward
motion of the platform to carry
a relatively short real antenna to
successive position along the
flight line. These successive
portions are treated
electronically as an individual
elements of the same antenna.
Therefore the resolution is
improved.

Radar Measurements

Radar Measurements

Wavelength and Penetration


of Canopy
The longer the microwave
wavelength, the greater the
penetration of vegetation
canopy.

10

Wavelength and Penetration of Canopy


The longer the microwave wavelength, the greater the
penetration of vegetation canopy.

11

Electrical Characteristics and Relationship with Moisture


One measure of a material's electrical characteristics is the
complex dielectric constant, defined as a measure of the
ability of a material (vegetation, soil, rock, water, ice) to
conduct electrical energy.
Dry surface materials have dielectric constants from 3 to 8 in
microwave portion of the spectrum.
Conversely, water has a dielectric constant of approximately
80.
The amount of moisture in soil, on rock surface, or within
vegetation tissues may have significant impact on the amount
of backscattered radar energy.

Electrical Characteristics and Relationship with Moisture


Moist soils reflect more radar energy than dry soil. The
amount of soil moisture influences how deep the incident
energy penetrates into materials.
The general rule of thumb for how far microwave energy will
penetrate into a dry substance is that the penetration should be
equal to the wavelength of the radar system.
However, active microwave energy may penetrate extremely
dry soil several meters.

12

Imaging Radar Applications


Environmental Monitoring
Vegetation mapping
Monitoring vegetation regrowth, timber yields
Detecting flooding underneath canopy, flood plain mapping
Assessing environmental damage to vegetation
Hydrology
Soil moisture maps and vegetation water content monitoring
Snow cover and wetness maps
Measuring rain-fall rates in tropical storms
Oceanography
Monitoring and routing ship traffic
Detection oil slicks (natural and man-made)
Measuring surface current speeds
Sea ice type and monitoring for directing ice-breakers

13

LIDAR (LIght Detection And Ranging)


Is a rapidly emerging technology for determining the
shape of the ground surface plus natural and man-made
features.
Buildings, trees and power lines are individually
discernible features. This data is digital and is directly
processed to produce detailed bare earth DEMs at vertical
accuracies of 0.15 meters to 1 meter.
Derived products include contour maps, slope/aspect,
three-dimensional topographic images, virtual reality
visualizations and more.

LIDAR (LIght Detection And Ranging)


LIDAR data can be integrated with other data sets,
including orthophotos, multispectral, hyperspectral and
panchromatic imagery.
LIDAR is combined with GIS data and other surveying
information to generate complex geomorphic-structure
mapping products, building renderings, advanced three
dimensional modeling/earthworks and many more high
quality mapping products.

14

LIDAR
Example of elevation surveys collected by an Airborne
Topographic Mapper (ATM II) in Fire Island, New York.
(Spatial resolution = 1 meter; Vertical resolution = 0.15 m)

15

You might also like