Scribd
Upload
235 views2 pages

Dataman 40pro Specification

The Dataman 40Pro is a universal 40-pin programmer with USB connectivity that supports over 22,000 device types. It has intelligent pin drivers that operate down to 1.8V and perform insertion tests to prevent chip damage. The programmer includes a 40-pin ZIF socket that accepts various package types as well as an ISP connector for in-circuit programming of microcontrollers and serial EEPROMs. It has easy-to-use software for device selection and programming with free lifetime updates.

Uploaded by

dgirad007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
235 views2 pages

Dataman 40pro Specification

The Dataman 40Pro is a universal 40-pin programmer with USB connectivity that supports over 22,000 device types. It has intelligent pin drivers that operate down to 1.8V and perform insertion tests to prevent chip damage. The programmer includes a 40-pin ZIF socket that accepts various package types as well as an ISP connector for in-circuit programming of microcontrollers and serial EEPROMs. It has easy-to-use software for device selection and programming with free lifetime updates.

Uploaded by

dgirad007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Dataman 40Pro

www.dataman.com

40 pin universal ZIF


socket accepts both
300/600 mil DIP
devices up to 40 pin

The Dataman 40Pro is a PC based universal 40-pin programmer with


ISP capabilities and USB 2.0 connectivity. The 40Pro is built to meet the
demands of development labs and field engineers for universal and
portable programming.
Dataman 40Pro is a small, fast and powerful programmer designed for
a huge range of programmable devices. Using the built-in in-circuit
serial programming (ISP) connector the programmer is able to program
ISP capable chips in-circuit. 40Pro isn't only a programmer, but also a
static RAMs tester.
Hardware
General
40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket.
Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or
ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program
the full range of today's advanced low-voltage devices
The programmer performs device insertion tests and contact checks before it programs each device. These
capabilities, supported by signature-byte check help prevent chip damage due to operator error
40Pro programmer performs programming verifications at the marginal level of supply voltage, which
improves programming yield, and guarantees long data retention
Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSOP, TSSOP, TQFP, QFN (MLF)
and other packages
Base Unit (DAC)
Two D/A converters for VCCP and VPP, controllable rise and fall time
VCCP range 2V..7V/350mA
VPP range 2V..25V/200mA
USB 2.0/1.1 compatible interface
Auto calibration
Self test capability

Intelligent pin drivers


allow varying voltages
to be applied to any
pin delivering signals
without overshoot,
increasing
programming yield
Pin drivers operate
down to 1.8V so you'll
be ready to program
the full range of
tomorrows advanced
low-voltage devices
ISP capable using the
JTAG interface
USB 2.0/1.1
connectivity allowing
fast and easy
connection to PCs and
laptops

ZIF Socket Pindriver


40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices
up to 40-pins

The Dataman 40Pro supports over 22,000 of the most popular devices in use
today - with future devices being added monthly. Dataman 40Pro coverage
includes the following device types:

Pindrivers: 40 TTL pindrivers, specialized GND/VCC/VPP pindriver


FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver
pins; level H selectable from 1.8V up to 5V

Programmer (ZIF Socket)

Continuity test: each pin is tested before every programming operation

EPROM

BI-PROM
EEPROM

ISP Connector
10-pin male type with miss insertion lock

EPLD

5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable


from 1.8V up to 5V to handle all (low-voltage including) devices

GAL

CPAL

1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range


2V..25V/50mA)

FLASH

Programmed chip voltage (VCCP) with both source/sink capability and


voltage sense

MACH

FPGA
MROM
NVRAM

Software

PAL

User Interface
Programmer is driven by an easy-to-use control program with pull-down
menus, hot keys and on-line help. Selecting of the device is performed by
class, manufacturer or simply by typing a fragment of vendor name and/or
part number

PEEL

Standard device-related commands (read, blank check, program, verify, erase)


are enhanced by some test functions (insertion test, signature-byte check),
and some special functions (autoincrement)

Programmer (ISP Connector)


Serial E(E)PROM

All known data formats are supported. Automatic file format detection and
conversion during loading of file
The rich-featured autoincrement function enables one to assign individual
serial numbers to each programmed device - or simply increments a serial
number. The function also enables one to read serial numbers or any
programmed device identification signatures from a file

PLD
MICROCONTROLLERS

MICROCONTROLLERS

Package Includes
Dataman 40Pro Universal ISP Programmer
Dimensions: 160 x 95 x 35mm (6.3 x 3.7 x 1.4inches)
Weight: 0.5Kg (1.1lbs)

The software also provides extensive information about programmable


devices including detailed drawings of all available packages. The software
also provides explanations of chip labelling (prefixes and suffixes) for each of
the supported chips

Switching Power Adapter


Operating voltage: 15-20V DC / max. 0.5A
Power consumption: max. 6W active / approx. 1.4W sleep

The software provides full information for ISP implementation: Description of


ISP connector pins for the currently selected chip, recommended target
design around in-circuit programmed chip and other necessary information

ISP cable

Keeping your programmer software up to date can be a costly business with


some programmers. Dataman offers completely FREE software updates
whenever you need them. The latest software is always available from our
website

Moulded USB Cable


Diagnostic POD for self test of the programmer
Anti-dust cover for ZIF socket
User manual
Software
Optional range of adapters and socket converters also available

Warranty and Support


30 day money back guarantee* - If you don't like it, send it back
Three year guarantee - Three years parts and labour warranty, on the 40Pro
universal device programmer
Life-Time Technical Support - 40Pro technical support is available free via
our website and telephone helpdesk for life
Life-Time Software Updates - 40Pro software updates are available free via
our website for life
*Applies to orders from UK/US offices only

www.dataman.com

IN THE US

Dataman Programmers Ltd.

Dataman Inc.

Station Road, Maiden Newton

215 East Michigan Avenue

Dorset DT2 0AE, UK

Orange City, Florida 32763 USA

Tel (01300) 320719

Tel (386) 774-7785

Fax (01300) 321012

Fax (386) 774-7796

Available from

06/09

IN THE UK

You might also like