Service Bulletin
ALL Models
99-015
April 26, 1999
Recommended Materials
Many procedures in service bulletins and other service publications require you to use adhesives, sealants,
lubricants, solvents, wool felt, EPT sealer, etc. While some of these materials look and feel similar to each other
or to non-approved materials, always use the recommended material to save yourself a costly comeback and a
dissatisfied customer. Remember: A material thats almost the same probably wont do the job.
A recommended material is selected by Honda engineers only after its effectiveness has been evaluated under
the conditions in which it will be used. To select the best materials, factors such as these are considered:
S The compounds that make up the part(s) being used.
S The materials resistance to temperature, moisture, vibration, etc.
S Whether the material needs to be dry or pliable.
S How the material bonds to dissimilar parts, for example rubber to glass, plastic to rubber, and plastic to metal.
This Service Bulletin describes most of the recommended materials commonly referenced in Acura service and
training publications. The materials are grouped into four categories: Insulating Products, Adhesives and Sealers,
Greases and Lubricants, and Cleaners and Polishes. You can purchase these materials through local suppliers;
many are also available through American Honda. Please share the information in this bulletin with the people in
your parts department.
Insulating Products
Material
P/N
Description and/or Usage
EPT Sealer 3T
06990-SA5-000
A 3 mm-thick, adhesive-backed foam sheet that you cut to size
and use on interior parts for sound dampening, cushioning, and
controlling squeaks and rattles.
EPT Sealer 5T
06991-SA5-000
Same as EPT Sealer 3T, except its 5 mm thick.
EPT Sealer 10T
06992-SA5-000
Same as EPT Sealer 3T, except its 10 mm thick.
Slip Tape
06994-SA5-000
An adhesive-backed, low-friction plastic tape used between
plastic parts to eliminate rubbing and squeaking.
Tricot Tape
71985SF1-000
A 0.25 mm-thick, adhesive-backed tape used between plastic
parts to eliminate rubbing, squeaking, and rattling.
Wire Harness Cushion
91902-SB2-003
Used for padding connectors and cushioning wire harnesses
and related parts.
Wool Felt
06993-SA5-000
A 1 mm-thick, adhesive-backed wool thats used for padding,
cushioning, or wrapping parts.
1999 American Honda Motor Co., Inc. All Rights Reserved
BTB 20494 (9904)
1 of 4
CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools,
equipment, and training to correctly and safely maintain your vehicle. These procedures should not be attempted by do-it-yourselfers, and you
should not assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information
applies, contact an authorized Acura automobile dealer.
Adhesives and Sealers
Material
P/N
Description and/or Usage
3M AUTOMIX Channel Bonding 3M #051135-08641
Adhesive (black)
Two-part adhesive used to secure windshield A-pillar
moldings.
Cemedine Weatherstrip
Adhesive
08712-0004
Adhesive sealer that bonds rubber seals to metal. Use in place
of 3M ULTRAPRO Autobody Sealant for water leak repairs.
Door Panel Shield Adhesive
08712-0003
Putty-like adhesive that reattaches the plastic cover (rain
protector) between the door and the door panel.
3M Quick-Fix Adhesive
3M #051135-08155
Used to reattach moonroof seals.
3M Weatherstrip Adhesive
(black)
3M #051135-08011
Adhesive-sealer used to bond rubber seals to metal. Do Not
use 3M Super Gasket Adhesive (yellow), or 3M Super
Weatherstrip Adhesive for this application.
Weatherstrip Cement
08712-0002
Attaches and seals soft-rubber weatherstripping to painted
metal.
3M Brushable Seam Sealer
3M #051135-08655
Fluid-like urethane sealer used to attach hood and roof ribs to
sheet metal panels, and to repair water leaks. Fills gaps up to 1
mm. Its flexible when dry.
3M Clear Auto Sealer
3M #051135-08551
Water leak sealer for windshields, taillights, moldings, and
small seams. Its smooth and flexible when dry.
3M FLEXICLEAR
Body Seam Sealer (Clear)
3M #051135-08405
Water leak sealer for interior or exterior joints and seams. Its
non-yellowing, flexible, and paintable when dry.
Hondabond HT Silicone
Liquid Gasket
08718-0001
Adhesive sealer for metal-to-metal, metal-to-plastic, or plasticto-plastic bonding. Good for high temperature applications.
Hondabond 4 Liquid Gasket
08717-0004
Liquid gasket silicone sealant used to seal critical areas as
specified in service manuals. Do not use it for gasketless
applications.
Hondalock 1 Threadlock
08713-0001
Low-strength thread lock and sealer for bolts.
Hondalock 2 Threadlock
08713-0002
Medium-strength thread lock and sealer for bolts.
Hondalock 2 HT Threadlock
08713-0004
Medium-strength, high-temperature thread lock and sealer for
bolts.
Hondalock 3 Threadlock
08713-0003
High-strength thread lock and sealer for studs and bearings.
Nox Rust X-124-B
08798-9006
A coating thats used to prevent rust on steel.
3M Rust Fighter-1 (amber)
3M #051135-08892
Non-hardening compound that replaces the factory rust
protection removed during body repairs.
Ultra Flange Sealant
08718-0003
Gray material used to seal areas as described in service
manuals. It can also be used for most gasketless applications
except oil pans.
Ultra Flange II Sealant
08718-0009
This thick, gray material is the only recommended product for
sealing gasketless oil pans on the 1998-99 2.3CL, and 99
3.2TL. Its also the preferred sealant for most gasketless
applications.
3M ULTRAPRO
Autobody Sealant
3M #051135-08302
Heavy bodied seam sealer that fills larger gaps than brushable
seam sealer. Its flexible and paintable when dry.
3M ULTRAPRO
Urethane Seam Sealer
3M #051135-08360
Similar to ULTRAPRO Autobody Sealant in description, usage,
and appearance. Its applied with an applicator gun (3M
#051135-08398).
3M WINDO-WELD
Resealant (black)
3M #051135-08633
Sealer used to repair leaks between glass and metal. Its
flexible when dry.
2 of 4
99-015
Greases and Lubricants
Material
P/N
Description and/or Usage
3M Brake Lube
3M #08945
High-temperature anti-seize lubricant and corrosion protection
for tight-fitting or dissimilar metal parts. Its good for minimizing
exhaust system buzz.
CV Joint Grease-Inner (yellow)
08798-9003
Extreme-pressure, high-temperature grease for inner CV joint
lubrication.
CV Joint Grease-Outer (black)
08798-9007
Extreme-pressure grease for lubricating all CV joints except
inner joints.
DC 111 Silicone Paste
Call Dow Corning:
800-248-2481
High-viscosity lubricant for rubber-to-metal, and plastic-to-metal
contact. Also used for suspension bushings and brake system
seals.
Honda Caliper Grease
08C30-B0224M
High-temperature, silicone-based grease used to lubricate
caliper slide pins.
Silicone Grease
08798-9013
Used to reduce rubber-to-rubber noises and to lubricate NSX-T
roof seals.
Lithium Dielectric Grease
08798-9001
White grease used to pack electrical connectors for moisture
and corrosion protection.
Molykote MH62
08798-9012-1
Moly grease used to lubricate plastic-to-plastic contact.
Molykote M77 (75-gram jar)
08798-9010
A high-molybdenum content paste that polishes more than it
lubricates. Use it on the back of brake pads and on brake
shims. For pint or gallon-size quantities, call Dow Corning,
800-248-2481.
Super High Temp Urea Grease
08798-9002
Medium-viscosity grease used to lubricate metal-to-metal and
metal-to-plastic parts. Its good for mainshaft splines and clutch
pivot points.
White Lithium Grease
08732-0005
Lubricates and dampens metal-to-metal contact in low
pressure, low temperature (below 300F) applications.
Genuine Honda Automatic
Transmission Fluid
08206-9001
The only ATF specifically formulated for use in Acura A/Ts.
Dont use any other ATF.
Genuine Honda Manual
Transmission Fluid
08798-9016
The only MTF specifically formulated for use in Acura M/Ts.
Dont use any other MTF.
5W-30 Motor Oil
08798-9014
Meets the SJ energy-conserving engine oil grade set by the
API (American Petroleum Institute).
10W-30 Motor Oil
08798-9015
Meets the SJ energy-conserving engine oil grade set by the
API (American Petroleum Institute).
PAG Oil ND-8
38899-PR7-A01
Refrigerant oil used in A/C systems with Nippon Denso (ND)
compressors.
PAG Oil
38899-P13-A01
Refrigerant oil used in A/C systems with Sanden
compressors.
PAG Oil
2-90188-301-0
Refrigerant oil used in SLX A/C systems.
Water Pump Lubricant
08798-9005
When added to the coolant, this lubricant reduces noise
caused by water pump bearings and seals.
99-015
3 of 4
Cleaners and Polishes
Material
P/N
Description and/or Usage
Brake Cleaner
PC-HBC265
Solvent for removing brake dust, fluid, and grease from
external brake system parts. Do not use it on hydraulic parts.
Greenline Brake Cleaner
08732-9001
For cleaning hydraulic and mechanical brake parts. Do not mix
it with brake fluid.
Non-Chlorinated Brake Cleaner
08732-9006
Low VOC. Approved for use in California by CARB. Cleans
hydraulic and mechanical brake parts. Do not mix it with brake
fluid.
Carburetor Cleaner
08732-0004
Solvent for removing grease, varnish, and other deposits from
fuel injection parts.
Greenline Carburetor Cleaner
08732-0007
Cleans unpainted metal. Do not use it on plastic, vinyl, or
painted metal.
3M General Purpose Adhesive
Cleaner
3M #051135-08984
Solvent for removing most kinds of adhesives and sealants. It
wont damage most plastic or painted surfaces.
Glass Cleaner
08732-ALL0141OE
Cleans glass, chrome, plastic, and vinyl.
HondaBrite All Surface Cleaner
(pump bottle)
08732-0020B
Cleaner for degreasing parts and removing brake dust from
alloy wheels.
HondaBrite (refill)
08732-0032
A 32-ounce refill for the HondaBrite bottle.
Mag V
Call 800-877-6282
Strong, acidic cleaner that removes stains and discoloration
from glass.
Multi-Purpose
Cleaner/Degreaser
08732-9003
Cleans and degreases most parts.
Spray Cleaner & Polish
08C25-P011M
General cleaner for painted metal, glass, plastic, and vinyl
surfaces.
Vinyl/Leather Protectant
08740-PC008
Protects the surfaces of vinyl, leather, and rubber parts.
4 of 4
99-015
