B53-35H-011 Polyethylene Copolymer: Typical Properties

B53-35H-011 Polyethylene Copolymer
B53-35H-011 is a high density polyethylene copolymer developed for blow molding applications. This
product is recommended for use in applications which require a combination of high top load strength
and good environmental stress crack resistance (ESCR). This material meets the Food and Drug
Administration requirements of 21CFR 177.1520. This resin contains no animal based additives and is
suitable for Kosher applications.
Typical Properties1
Values
English Units
Density
Melt Index 2
Tensile Strength
@ Yield (2 in/min)
Elongation
@ Break (2 in/min)
Tensile Modulus of Elasticity3
Flexural Modulus 3
Stiffness In Flexure
Notched Izod Impact Strength
Tensile Impact Strength
Hardness (Shore D)
Vicat Softening Point
Brittleness Temperature
Deflection Temperature @66 psi
ASTM
Method
SI Units
0.955 g/cc
0.35 g/10 min
D 4883
D 1238
4000 psi
27.6 MPa
D 638
>700%
217,000 psi
180,000 psi
100,000 psi
3.5 ft-lbf/in
132 ft-lbf/in2
65
268 oF
<-103 oF
>700%
1497 MPa
1241 MPa
690 MPa
0.19 kJ/m
277 kJ/m2
65
131 oC
<-75 oC
D 638
D 638
D 790
D 747
D 256
D 1822
D 2240
D 1525
D 746
165 oF
74 oC
D 648
__
__
1 Typical properties will vary within specification limits.

2 190o C/2160 g
3 Tangent-Method
Technical information contained herein is furnished without charge or obligation, and is given and accepted at recipient's sole risk. Because conditions of use may vary and are
beyond our control, Ineos Olefins & Polymers USA makes no representation about, and is not responsible or liable for the accuracy or reliability of data, nor for toxicological
effects or Industrial Hygiene requirements associated with particular uses of any product described herein. Nothing contained in this document shall be considered a
recommendation for any use that may infringe patent rights, or an endorsement of any particular material, equipment, service, or other item not supplied by Ineos Olefins &
Polymers USA. The Properties and Applications listed in this document are not specifications. They are provided as information only and in no way modify, amend,
enlarge, or create any specification or warranty, and ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED.
The name Ineos Olefins & Polymers USA and its logo are trademarks of Ineos USA LLC or its affiliated companies.
2600 South Shore Boulevard

League City, TX 77573
Tel: 281-535-6600
www.ineos.com
June 2006
2006 Ineos Olefins & Polymers USA
B53-35H-011 Polyethylene Copolymer
Regulatory Information
The product and uses described herein may require global product registrations and notifications for
chemical inventory listings, or for use in food contact or medical devices. For further information,
send an e-mail to: [email protected].
Health and Safety Information
The product described herein may require precautions in handling and use because of toxicity,
flammability, or other consideration. The available product health and safety information for this
material is contained in the Material Safety Data Sheet (MSDS) that may be obtained by calling + 1800-527-5419 (Toll Free - North America), or by sending an e-mail to: [email protected].
Before using any material, a customer is advised to consult the MSDS for the product under
consideration for use.
The Material Safety Data Sheet for this product contains shipping descriptions and should be
consulted, before transportation, as a reference in determining the proper shipping description. If the
material shipped by Innovene is altered or modified, different shipping descriptions may apply and the
MSDS of the original material should not be used.
For additional information, samples, pricing and availability, please contact:
INEOS Olefins & Polymers, USA

Marina View Building
League City, Texas 77573
Phone: +1 281 535 6600
Fax: +1 281 535 6764
Customer Service: +1 800 527 5419
Tech Service: +1 800 338 0489
www.innovene.com
Technical information contained herein is furnished without charge or obligation, and is given and accepted at recipient's sole risk. Because conditions of use may vary and are
beyond our control, Ineos Olefins & Polymers USA makes no representation about, and is not responsible or liable for the accuracy or reliability of data, nor for toxicological
effects or Industrial Hygiene requirements associated with particular uses of any product described herein. Nothing contained in this document shall be considered a
recommendation for any use that may infringe patent rights, or an endorsement of any particular material, equipment, service, or other item not supplied by Ineos Olefins &
Polymers USA. The Properties and Applications listed in this document are not specifications. They are provided as information only and in no way modify, amend,
enlarge, or create any specification or warranty, and ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED.
The name Ineos Olefins & Polymers USA and its logo are trademarks of Ineos USA LLC or its affiliated companies.

League City, TX 77573
Tel: 281-535-6600
www.ineos.com
June 2006
2006 Ineos Olefins & Polymers USA

B53-35H-011 Polyethylene Copolymer: Typical Properties

Uploaded by

Copyright:

Available Formats

B53-35H-011 Polyethylene Copolymer: Typical Properties

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

B53-35H-011 Polyethylene Copolymer: Typical Properties

Uploaded by

Copyright:

Available Formats

B53-35H-011 Polyethylene Copolymer

1 Typical properties will vary within specification limits.

2600 South Shore Boulevard

2006 Ineos Olefins & Polymers USA