PDMS Bulletin116sp5

PDMS
User Bulletin
Version 11.6.SP5
pdms1165/PDMS Bulletin
Issue 311008
PLEASE NOTE:
AVEVA Solutions has a policy of continuing product development: therefore, the
information contained in this document may be subject to change without notice.
AVEVA SOLUTIONS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO
THIS DOCUMENT, INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
While every effort has been made to verify the accuracy of this document, AVEVA
Solutions shall not be liable for errors contained herein or direct, indirect, special,
incidental or consequential damages in connection with the furnishing, performance
or use of this material.
This manual provides documentation relating to products to which you may

not have access or which may not be licensed to you. For further information
on which Products are licensed to you please refer to your licence conditions.
Copyright 1974 through 2008 AVEVA Solutions Limited
All rights reserved. No part of this document may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without prior written permission of AVEVA
Solutions.
The software programs described in this document are confidential

information and proprietary products of AVEVA Solutions or its licensors.
For details of AVEVA's worldwide sales and support offices, see our website at
http://www.aveva.com
VANTAGE PDMS Version 11.6.SP5

User Bulletin
ii
Revision History
Issue
Notes
181104
Final draft for PDMS 11.6.0
140705
Final amendments for PDMS 11.6.SP1 marked *sp1*
261005
Amendments for PDMS 11.6.SP2 marked *sp2*
281005
Amendments & additions for defects
150506
Amendments for PDMS 11.6.SP3 marked *sp3*.

Along with program corrections and minor enhancements
(see chapter 8), changes include:
Piping Application Enhancements
Other Design Enhancements (see chapter 3)
Changes to support Global 2.4
Support for AutoCAD 2005, 2006 in AutoDRAFT
In addition page headers have been corrected.
130207
Amendments for PDMS 11.6.SP4 marked *sp4*.

Along with program corrections and minor enhancements
(see chapter 11), major enhancements include:
Pipe bending checks & pipe sketches

Parameterised Property Attributes (new Chapter 6)
Weights on Isometrics
New options for flow arrows on Isometrics
Intellectual Property protection for PML applications
A new chapter 10 covers updates to standard projects:
Australian Steel Catalogue
MDS Lexicon database
Chapter 1 (Introduction) has also been updated, notably the
sections on Support status and Future considerations, along
with minor corrections and improvements throughout.
Improvements related to Global 2.4.sp1 are also detailed in
this document:
311008
Query Global Network status from all modules

(section 2.8)
Admin queries for Remote databases and purging
transaction commands (Chapter 7)
Amendments for PDMS 11.6.SP5 marked *sp5*
Includes enhancements to Isodraft, Admin (primarily for
Global) and an additional section on fixed defects.

User Bulletin
Revision history-i
Contents
1
Introduction...................................................................................................1-1
1.1
1.2
1.3
1.4
Overview .................................................................................................................... 1-1

Summary of Changes at PDMS 11.6........................................................................ 1-2
Summary of Changes at PDMS 11.6.SP1 *sp1*..................................................... 1-3
1.4.1 Support for Final Designer.............................................................................. 1-3
1.4.2 Support for Laser Model Interface.................................................................. 1-3
1.4.3 Miscellaneous Improvements.......................................................................... 1-4
1.5.1 Piping application ............................................................................................ 1-4
1.5.2 Draft 3D view ................................................................................................... 1-4
1.5.3 Support of Global 2.4 ....................................................................................... 1-4
1.5.4 Miscellaneous Improvements.......................................................................... 1-5
1.6.1 Pipe bending checks & sketches...................................................................... 1-5
1.6.2 Parameterised Property Attributes ................................................................ 1-5
1.6.3 Weights on Isometrics...................................................................................... 1-6
1.6.4 Australian Steel Catalogue ............................................................................. 1-6
1.6.5 Intellectual Property protection for PML applications .................................. 1-6
1.6.6 Changes to related products............................................................................ 1-6
1.7.1 Isodraft Enhancements ................................................................................... 1-7
1.7.2 Changes to related products............................................................................ 1-7
Documentation *sp1* *sp2* *sp5* ........................................................................ 1-7
Operating System and Hardware Environment *sp4* ........................................ 1-8
Upgrading from previous releases *sp5* ............................................................... 1-9
Compatibility
(update) *sp3*............................................................................ 1-10
Notice of change in support status (update) *sp4*................................................ 1-10
1.12.1 PDMS 11.4 and earlier ............................................................................. 1-10
1.12.2 PDMS 11.5
(update) *sp4* ............................................................... 1-10
Future considerations ............................................................................................. 1-10
1.13.1 AutoCAD integration
(update) *sp4*................................................. 1-10
1.13.2 Windows versions
(update) *sp5* ..................................................... 1-10
1.13.3 Use of UNIX servers (update) *sp5* .................................................... 1-11
1.13.4 PML features
(update) *sp5* ............................................................ 1-11
1.13.5 Design Comparison with Schematics *sp5* .......................................... 1-12
1.13.6 ISODRAFT symbol files
*sp5* ............................................................ 1-12
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
PDMS GUI General changes .....................................................................2-1
2.1
2.2
Glossary ..................................................................................................................... 2-1

Application framework.............................................................................................. 2-3
2.2.1 Toolbars ............................................................................................................ 2-3
2.2.2 Dockable Windows ........................................................................................... 2-3
2.2.3 Floating Windows ............................................................................................ 2-3
2.2.4 Status Bar ........................................................................................................ 2-3
2.2.5 Session Settings ............................................................................................... 2-4
Tabbed Graphics form............................................................................................... 2-4
Database Explorers ................................................................................................... 2-5
2.3
2.4

User Bulletin
Contents-i
Contents
2.5
2.6
2.7
2.8
2.4.1 History .............................................................................................................. 2-5

2.4.2 Explorer Settings ............................................................................................. 2-6
2.4.3 Filters ............................................................................................................... 2-6
2.4.4 Copy rules......................................................................................................... 2-6
2.4.5 Drag-and-drop .................................................................................................. 2-7
2.4.6 Mouse Actions .................................................................................................. 2-9
2.4.7 ToolTips ............................................................................................................ 2-9
2.4.8 Updates............................................................................................................. 2-9
Drawlist ..................................................................................................................... 2-9
My Data ................................................................................................................... 2-10
UNDO / REDO ........................................................................................................ 2-10
Information about Global network status *sp4* ................................................. 2-10
PDMS Design Changes ................................................................................3-1
3.1
3.2
3.3
General GUI improvements ..................................................................................... 3-1

Element Selection (update) *sp4* ......................................................................... 3-3
Quick Pipe Routing ................................................................................................... 3-4
3.3.1 Improvements for PDMS 11.6.sp3 *sp3* ..................................................... 3-4
Pipe Component modification................................................................................... 3-5
Pipe Component creation.......................................................................................... 3-6
Pipe Component Reselection .................................................................................... 3-6
Equipment Editing.................................................................................................... 3-6
Design Areas.............................................................................................................. 3-6
New Piping Pseudo Attributes ................................................................................. 3-7
3.9.1 Branch Surface Area........................................................................................ 3-7
3.9.2 Range of Angles or Radii ................................................................................. 3-7
3.9.3 Data Consistency ............................................................................................. 3-8
New Attributes for Material Management .............................................................. 3-9
3.10.1 Status attribute for use in MTO output .................................................... 3-9
3.10.2 Additional attributes for spool MTO........................................................ 3-10
3.10.3 Additional attributes for Piping Specifications ....................................... 3-10
Extract Refresh ....................................................................................................... 3-10
Add to Drawlist tool bar
*sp1* .......................................................................... 3-10
Piping component (e.g. flange) alignment *sp1* .................................................. 3-10
3.13.1 New attribute for PTCA, PTAX, PTMI, PTPOS...................................... 3-11
3.13.2 New pseudo attributes for branch members ........................................... 3-11
3.13.3 Connection Command............................................................................... 3-11
3.13.4 New Datacon warning messages.............................................................. 3-11
HVAC application new components *sp1*......................................................... 3-11
Pipe bending checks
*sp4*................................................................................. 3-12
3.15.1 Definitions ................................................................................................. 3-12
3.15.2 Design Database additions (update) *sp4*........................................... 3-12
3.15.3 Production Pipes Check Form .................................................................. 3-13
3.15.4 Setting up Production Checks .................................................................. 3-16
3.15.5 Running a Production Check.................................................................... 3-17
3.15.6 Automatic Flange Alignment ................................................................... 3-20
Laser model and its manipulation *sp2* ............................................................. 3-21
Check Isometrics ..................................................................................................... 3-21
Look Explicit
*sp3* .......................................................................................... 3-22
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
3.16
3.17
3.18
VANTAGE PDMS 11.6.SP5

User Bulletin
Contents-ii
Contents
Piping Isometric Enhancements .................................................................4-1
4.1
4.2
4.3

Parameterised MTOL & MTOQ ............................................................................... 4-1
Use of temperature and pressure for selection........................................................ 4-1
4.3.1 Standard Bolt Hole DB Change ...................................................................... 4-1
4.4 User-defined Material Lists...................................................................................... 4-2
4.5 Spooler Pulled bend numbering *sp1* ................................................................ 4-2
4.6 Isodraft Pulled bend numbering *sp1* ............................................................... 4-2
4.7 Weights on Isometrics
*sp4* ............................................................................... 4-2
4.7.1 User Interface .................................................................................................. 4-3
4.7.2 Command Syntax............................................................................................. 4-3
4.7.3 OUTPUT........................................................................................................... 4-3
4.7.4 Example Material List..................................................................................... 4-4
4.8 Flow Arrow settings
*sp4*................................................................................... 4-5
4.9 Isodraft SKEY Enhancements *sp5* .................................................................... 4-5
4.9.1 New UNBW SKEY........................................................................................... 4-5
4.9.2 New FY** SKEY .............................................................................................. 4-6
4.9.3 Tee/Olet SKEY Enhancement ......................................................................... 4-6
4.10 Improved Continuation Sheet Options *sp5* ......................................................... 4-7
4.10.1 New Annotation Options ............................................................................ 4-7
4.11 Placing of Dimension Labels *sp5* ....................................................................... 4-9
4.12 Improved Dimensioning Oriented Welds *sp5* ................................................ 4-10
Drawing Production Enhancements ...........................................................5-1
5.1

5.1.1 Merged sub-applications.................................................................................. 5-2
5.1.2 User utility menu............................................................................................. 5-3
5.1.3 Dimension and 2D drawing forms .................................................................. 5-3
5.1.4 Labelling rationalisation ................................................................................. 5-3
Use of the 3D features in DRAFT (update) *sp1* .................................................. 5-4
5.2.1 3D Commands .................................................................................................. 5-4
5.2.2 3D user interface.............................................................................................. 5-4
5.2.3 Managing 3D view content (Drawlist) ............................................................ 5-5
5.2.4 Multi Selection ................................................................................................. 5-6
5.2.5 Scale control ..................................................................................................... 5-8
5.2.6 UNDO/REDO ................................................................................................... 5-8
5.2.7 Modify Star....................................................................................................... 5-8
5.2.8 3D to 2D (Update Design)................................................................................ 5-8
5.2.9 2D to 3D............................................................................................................ 5-9
5.2.10 Display of 2D view frame in the 3D view gadget ...................................... 5-9
5.2.11 Update control........................................................................................... 5-10
5.2.12 View Type .................................................................................................. 5-10
5.2.13 Section Planes ........................................................................................... 5-10
5.2.14 Representation in 3D view ....................................................................... 5-10
5.2.15 Viewfinder Shortcut menu. ...................................................................... 5-11
5.2.16 3D view Shortcut menu additions related to view finder. ...................... 5-11
Template drawings.................................................................................................. 5-12
Section planes.......................................................................................................... 5-12
5.4.1 Improvements for *sp3* ................................................................................ 5-12
5.2
5.3
5.4

User Bulletin
Contents-iii
Contents
5.5
5.6
5.7
5.8
Background processes ............................................................................................. 5-13

AutoCAD integration with Final Designer ............................................................ 5-13
UNDO/REDO
*sp1* ......................................................................................... 5-14
Pipe Sketch ADP
*sp4*..................................................................................... 5-14
5.8.1 Producing Pipe Sketches ............................................................................... 5-14
5.8.2 How to Use the Pipe Sketches Form............................................................. 5-14
5.8.3 Pipe Sketch Administration .......................................................................... 5-17
5.8.4 Styles .............................................................................................................. 5-19
5.8.5 Common Object .............................................................................................. 5-19
5.8.6 Log Messages ................................................................................................. 5-20
5.8.7 Table Definition Example.............................................................................. 5-20
5.8.8 Dimensions..................................................................................................... 5-21
5.8.9 Tags ................................................................................................................ 5-21
Parameterised Property Attributes .............................................................6-1
6.1
6.2
6.3
Introduction
*sp4*.............................................................................................. 6-1
Property attributes affected *sp4* ........................................................................ 6-1
Upgrade Requirement
*sp4* ............................................................................... 6-2
Admin enhancements for Global.................................................................7-1
7.1
7.2
7.3
Querying Remote databases *sp4*........................................................................ 7-1

Purge Transaction commands *sp4*..................................................................... 7-4
User Interface enhancements *sp5* .................................................................... 7-5
7.3.1 Admin elements Form ..................................................................................... 7-5
7.3.2 DB Allocation (By Location/By Database) Forms .......................................... 7-5
7.3.3 Create DB Form ............................................................................................... 7-5
7.3.4 Create Location Form ...................................................................................... 7-6
7.3.5 Extract Control Form ...................................................................................... 7-6
7.3.6 Main Tool bar ................................................................................................... 7-6
7.3.7 DICE Form ....................................................................................................... 7-6
7.3.8 Transaction Command Timings Form............................................................ 7-6
7.3.9 Create MDB Form ........................................................................................... 7-6
Customisation...............................................................................................8-1
8.1
8.2
8.3
Application switching................................................................................................ 8-1

Forms & Menus (PML) Enhancements ................................................................... 8-1
Further PML (Forms & Menus) changes *sp1* ..................................................... 8-3
8.3.1 Gadget layout management ............................................................................ 8-3
8.3.2 Form enhancements ........................................................................................ 8-4
8.3.3 New SLIDER gadget........................................................................................ 8-4
8.3.4 New radio group facility .................................................................................. 8-4
8.3.5 List gadget enhancements............................................................................... 8-5
8.3.6 Option gadget enhancements .......................................................................... 8-5
8.3.7 Miscellaneous ................................................................................................... 8-5
Internationalisation .................................................................................................. 8-6
Localisation ............................................................................................................... 8-6
PML Encryption
*sp4*........................................................................................ 8-7
8.6.1 Decryption ........................................................................................................ 8-7
8.6.2 Encryption ........................................................................................................ 8-7
8.6.3 Buffering........................................................................................................... 8-8
8.4
8.5
8.6

User Bulletin
Contents-iv
Contents
Incompatible PML changes..........................................................................9-1
9.1
9.2
9.3
9.4
9.5
9.6
Summary ................................................................................................................... 9-1

Functional changes at 11.6 ....................................................................................... 9-1
Layout changes at 11.6 ............................................................................................. 9-2
Functional changes
*sp1* .................................................................................... 9-3
9.4.1 Multi-selection list Extra Start and Stop meta-events............................... 9-3
Layout changes
*sp1* ......................................................................................... 9-4
Parameterised Property attributes *sp4*.............................................................. 9-4
10
Updates to standard projects ....................................................................10-1
10.1 Supports catalogue for MDS *sp4* ..................................................................... 10-1

10.2 Australian Steel Catalogue *sp4* ...................................................................... 10-1
11
Product Faults and User Requests ...........................................................11-1
11.1 Known faults and Outstanding Issues................................................................... 11-1

11.1.1 Windows fault correction available....................................................... 11-1
11.1.2 Windows faults file locking.................................................................... 11-1
11.1.3 Microsoft .NET Framework Hotfixes KB886903 & KB886904 .............. 11-1
11.1.4 PDMS faults & limitations future corrections (update) *sp4* ............ 11-2
11.2 Faults corrected and minor enhancements ........................................................... 11-4
11.3 Faults corrected and minor enhancements *sp1* ............................................... 11-17
11.6.1 Corrections to Global 2.4.SP1 (issued with PDMS 11.6.sp4)................ 11-46
11.7.1 Corrections consolidated from previous fix releases: ............................ 11-48
11.7.2 Corrections to Global 2.4.SP2 (issued with PDMS 11.6.SP5)............... 11-52

User Bulletin
Contents-v
Contents

User Bulletin
Contents-vi
Introduction
This bulletin describes the new and enhanced functionality available in
the fifth service pack (SP5) for PDMS 11.6, including information about
the earlier releases of PDMS 11.6. It gives an overview of the major
changes at 11.6, which are described in full in new and revised User
Documentation. Minor changes and enhancements are also described in
this Bulletin.
There are no major changes to PDMS itself in the various service packs.
There are, however, changes in some of the related products, together
with corrections, small changes and enhancements, and revisions to some
of the User Documentation.
The most significant changes in this document for the various service
packs are indicated as appropriate: *sp1*, *sp2*, *sp3*, *sp4*. *sp5*.
1.1
Overview
PDMS has long led the way for 3D Plant Design. It has always been
object-based, using the concept of building a computer model of the plant,
in order to ensure that the design works in every detail. Deliverables are
always consistent as they are derived from this model. Interaction with
this model has used realistic colour-shaded images for over 15 years.
PDMS 11.5 introduced the first steps of a programme to build the Next
Generation user interface for PDMS, based on the latest Windows
technology. PDMS 11.6 brings a further leap forward in the graphical
user interface. Major new features introduced at PDMS 11.6 include:
Use of the latest Microsoft .NET technology to provide Windows

graphical user interface (GUI) standards for familiarity and ease of
integration. This gives an appearance, and many GUI features,
similar to Microsofts Office 2003.
A simpler mechanism for the various add-in applications for DESIGN,

both those produced by AVEVA and by customers.
Extension of the new Model Editor, introduced at PDMS 11.5, and

provision of a new Plant Editor for Piping and Equipment. Refer to
the VANTAGE PDMS Version 11.6 Graphical Model Manipulation
Guide for details. Future work will provide further specialist
discipline-oriented Editors to support the workflow for engineering
design.

User Bulletin
1-1
Introduction
A new GUI for DRAFT, including a 3D view, to simplify the creation

and annotation of drawings.
The first service pack provided improvements, based on early use of some
of these new features, notably in DRAFT. In addition, there were many
enhancements made to ease migration of PML applications to PDMS 11.6
and the .NET environment.
PDMS 11.6.SP1 also shared technology with AVEVAs new VANTAGE
Marine Outfitting product.
PDMS 11.6.SP2 enabled the use of two new add-on products: Final
Designer 1.3 and Laser Model Interface. These both integrate PDMS
with a third party product.
Final Designer enables the use of AutoCAD as an alternative editor for

PDMS Draft drawings. Its use is described in its on-line help and in its
Getting Started with Final Designer manual.
The Laser Model Interface enables PDMS Design to link to third party
laser model software to enable the point cloud survey data to be
visualised, measured and checked for clashes.
PDMS 11.6.SP3 brings further refinements, particularly to the new
piping application, as well as various priority enhancements and
corrections. It also adds support for the updated release of Global,
version 2.4.
PDMS 11.6.SP4 brings further improvements, as well as various priority
enhancements and corrections. Particular attention has been paid to
performance of the system, and in particular graphical picking. This
document also notes a few refinements in Global, in its first service pack
since the release of version 2.4.
PDMS 11.6.SP5 is provided to consolidate defect corrections and to
support a further update to Global, Global 2.5. This has many GUI
improvements as well as a major boost to update performance please
see separate bulletin.
1.2
Summary of Changes at PDMS 11.6

The changes fall into 3 main categories:
The PDMS Application Framework, with its new .NET GUI. This
brings improved ways of integrating users GUI customisation.
PDMS Design, with its enhanced Design Explorer and a new Plant
Editor, for Piping & Equipment.

User Bulletin
1-2
Introduction
PDMS Draft, with its new .NET GUI, 3D View and provision for
integration with AutoCAD.
Further work has been carried out on support of international languages,

though further improvements are planned for future releases. Details
are given in chapter 8 of this document.
There are many other minor improvements throughout the product and
much of the documentation has been updated.
1.3
Summary of Changes at PDMS 11.6.SP1
*sp1*
The changes fall into 3 main categories:
PDMS Design, with a new Add to Drawlist tool bar to specify the
colour of objects added using the Design Explorer.
PDMS Draft, with improvements to the usability of the new 3D View,

including section planes, and implementation of UNDO/REDO.
The PDMS customisation environment (PML Forms & Menus) has

further improvements for the definition of user interface gadgets.
In addition, changes have been made to support new releases of the other
VANTAGE Plant Design products, notably:
VANTAGE Plant Design Router 2.4
VANTAGE Plant Design Global 2.3
VANTAGE Multi-Discipline Supports 11.6
Corrections and improvements for many issues raised by customers in
PDMS 11.6 and earlier releases are also included in the service pack.
1.4
*sp2*
1.4.1 Support for Final Designer

The new VANTAGE Plant Design Final Designer product provides a fully
integrated AutoCAD editor for DRAFT, thus enabling its use on
drawings produced directly from the PDMS model.
1.4.2 Support for Laser Model Interface

This new product enables point clouds from laser surveys to be used in
PDMS Design, thus enabling them to be viewed, measured and clash
checked alongside the PDMS model. It requires the use of a third party

User Bulletin
1-3
Introduction
system from the specialist survey company, with which it integrates

closely. The system is designed to be open, but is expected to become
available initially from BitWyse, Leica (Cyra), Mensi/Trimble,
Quantapoint and Zoller+Frhlich (Z+F). There is a reference manual
explaining the new commands associated with the interface, but for full
details it is necessary to consult the appropriate third party vendor.
1.4.3 Miscellaneous Improvements

1.5
*sp3*
1.5.1 Piping application

In addition to correction of issues raised by customers in their use of
earlier releases of PDMS 11.6, there have been various improvements to
the usability of the piping application. These are noted in section 3.3.1.
1.5.2 Draft 3D view

A number of enhancements to the new 3D view in Draft, notably to the
use of stepped section planes. See section 5.4.1.
1.5.3 Support of Global 2.4

PDMS 11.6.SP3 supports the use of a new release of Global; use with
Global 2.3 is not supported. This new release uses additional features in
the Global daemon (2.4) to allow a number of significant enhancements.
These include several aimed at providing better feedback to users, as
well as some giving additional control of Global functions. The robustness
of the daemon itself has been improved to minimize the number of
occasions it needs to be re-started.
The new features in Global are fully documented in a release bulletin
and updated versions of its other manuals.
Please note that many of the features of Global 2.4 are also available in
Global 2.2.SP2 for users of PDMS 11.5, in conjunction with a new service
pack SP2 for the latter. However, those which depend on additional
database attributes are not available.

User Bulletin
1-4
Introduction
1.5.4 Miscellaneous Improvements

These are noted in section 11.5.
1.6
*sp4*
This service pack addresses a number of points raised during the use of
earlier releases of PDMS 11.6, along with corrections to faults found
during testing and use of earlier releases of PDMS. Details of these
changes can be found in Section 11.6.
In addition, there are some additional features, which are summarised
here and described in more detail in separate sections of this document.
The sample projects have also been updated, to include a steel catalogue
for Australia & New Zealand (see Section 1.6.4) and a dictionary
database for MDS (MASTER/MDSDICT) please see Chapter 10.
SP4 is accompanied by updates of some of the add-on products, notably:
VANTAGE Plant Design Router 2.4.SP4
VANTAGE Plant Design Global 2.4.SP1 (see Section 1.1.1.1)
VANTAGE Multi-Discipline Supports 11.6.SP4 (see Section 1.1.1.2)
1.6.1 Pipe bending checks & sketches

Allow the designer to check that a given pipe spool may be manufactured
by a particular machine, if such a machine has been defined in the
database. These pipes may then be detailed for fabrication using scale
drawings complete with fabrication information. Please see Sections 3.15
and 5.8.
1.6.2 Parameterised Property Attributes

This allows attributes in the property database to use parameters in
their definition, which can simplify the calculation of properties such as
weight. Please see Chapter 6.

User Bulletin
1-5
Introduction
1.6.3 Weights on Isometrics

This allows the user to add a weight column to the isometric material list
and provide a summary total for the fabrication and erection materials
plus an overall total for isometric material weight. Please see Section 4.7
1.6.4 Australian Steel Catalogue

This is a new catalogue in the standard project, structured in a similar
manner to the AISC one. Please see Chapter Error! Reference source not
found..
1.6.5 Intellectual Property protection for PML applications

A separate utility is available to encrypt PML macros. Encrypted macros
are automatically detected and decrypted as required. Please see Section
8.6.
1.6.6 Changes to related products

1.1.1.1 Global 2.4.SP1
Improvements to the user interface include:
Remote database session querying in ADMIN
Transaction purging appware in ADMIN
In addition, Network status is now available in all modules. Please note

that there are also corrections noted in section 11.6.1.
1.1.1.2 MDS
MDS 11.6.SP4 provides an interface to the design applications provided
by various pipe support vendors: Lisega, Carpenter & Paterson, Pipe
Supports Ltd. Please refer to MDS documentation for details.
1.7
*sp5*
This service pack addresses a number of points raised during the use of
earlier releases of PDMS 11.6, along with corrections to faults found
during testing and use of earlier releases of PDMS. Details of these
changes can be found in Section 11.6.

User Bulletin
1-6
Introduction
In addition, there are many enhancements to Admin, mostly aimed at

simplifying the use of Global. The changes mean that it is important to
use Global 2.5.
1.7.1 Isodraft Enhancements

Significant Isodraft enhancements have been made since PDMS
11.6.SP4; they were first issued in PDMS 11.6.SP4.11.
SKEY Enhancements
Improved Continuation Sheet Functionality
Alternate Placing of Dimension Labels
These are documented in sections 4.9, 4.10, 4.11.

A further enhancement was included in PDMS 11.6.SP4.12.
Control component dimensioning on either side of a weld
This is documented in section 4.12.
1.7.2 Changes to related products

1.7.2.1 Global 2.5
Global 2.5 has many improvements, notably to update performance and
to the handling of offline satellites.
Please note that the performance improvements have necessitated a
change to the format of the data passed between locations, so 2.5 cannot
be mixed with versions of 2.4.
1.7.2.2 PDMS Nuclear Applications
There are two new product options available with PDMS 11.6.sp5:
Nuclear Concrete Design and Nuclear Room Manager. At present, these
applications are shipped and documented separately.
1.8
Documentation
*sp1* *sp2* *sp5*
This bulletin outlines the major changes at both the original PDMS 11.6
release and its service packs: it is updated for each service pack.
Most of the manuals were updated for PDMS 11.6; many had significant
changes that are noted on a Revision History page at the front of the
manual.

User Bulletin
1-7
Introduction
The Pipework design using VANTAGE PDMS manual, which was not
included in the original release, was updated for PDMS 11.6.SP1. The
following manuals were also updated for SP1:
PDMS Installation Guide
Drawing Production Using VANTAGE PDMS 11.6
PDMS Software Customisation Guide
PDMS Software Customisation Reference Manual
Many of the other manuals had minor amendments and corrections.

For PDMS 11.6.SP2, there were again amendments to 4 manuals:
Drawing Production Using VANTAGE PDMS 11.6
PDMS DESIGN Reference Manual Part 1:General Commands 11.6
PDMS ISODRAFT User Guide 11.6
PDMS ISODRAFT Reference Manual 11.6
The release also contains updated Design and Draft online help files:
updates were also supplied as a fix release PDMS11.6.SP1.2.
PDMS 11.6.SP5 also includes updates to some of the manuals, notably
for Admin.
1.9
Operating System and Hardware Environment
*sp4*
PDMS 11.6 is supported for use on Microsoft Windows 2000 SP4 and
Windows XP Service Pack (SP) 1, 2 or 3. It is not supported on the new
Windows Vista please see section 1.13 below. There is no UNIX version
of PDMS 11.6.
Windows XP SP2 requires changes to the default settings. The Internet
Connection Firewall (ICF) should be turned off or configured to enable
access to the database & licence servers. In addition, Group Policy
changes (which alter the registry) are required for users of Global
projects to ensure that RPC requests do not require authentication.
Details are given in the Installation Guide.
PDMS 11.6 requires Microsofts .NET Framework 1.1, which is supplied
on the CD-ROM and installed if required. This is used for the PDMS
graphical user interface. Please note that PDMS 11.6 is not compatible
with .NET Framework version 2.0 or later; if later versions are required
for other applications, it is necessary to install them in addition to
version 1.1. Further information is available on Microsofts web-site, for
example, see http://msdn2.microsoft.com/en-us/library/s80xxs7s.aspx.

User Bulletin
1-8
Introduction
PDMS 11.6 should run successfully on Windows NT4, but it has not been
tested under Windows NT4 and is no longer supported in that
environment. Please note that Microsoft no longer offers mainstream
support for either Windows NT4 or Windows 2000; it no longer offers
even extended support for NT4.
A minimum of 512 MB of memory is recommended for this release.
PDMS 11.6 will operate with less, but system performance will be
compromised. A screen resolution of at least 1024x768 is recommended.
Users running Windows XP are recommended to use the XP rather than
Classic theme. These should be set using Display Properties.
Due to the rapidly changing list of hardware-accelerated OpenGL
graphics cards commercially available, an up-to-date list of supported
graphics cards is not included in the documentation released with PDMS.
However, the AVEVA Web pages (http://www.aveva.com) contain a
current list of both tested and supported graphics cards.
1.10 Upgrading from previous releases
*sp5*
PDMS 11.6.SP5 is fully compatible with earlier releases of PDMS 11.6

and requires no upgrade. Please note, however, that Global should be
upgraded at the same time see above. PDMS 11.6 itself requires no
change to the PDMS database structure from that used at PDMS 11.4 &
11.5. Upgrade scripts are provided to upgrade projects from all previous
releases of PDMS 11 on the Windows platform, i.e. 11.2, 11.3, 11.4 &
11.5.
The upgrade scripts take account of a change at PDMS 11.4SP1, when
the standard database definition files were moved to the PDMS
executable directory (PDMSEXE). This simplified the upgrade process
required to add new attributes and elements to databases. It is no longer
necessary to copy these files (also known as virgin database files) to the
project data areas in order to gain access to new elements and attributes.
Users own PML customisation and applications from PDMS 11.4 or 11.5
should continue to work, after being amended to use the new application
switching mechanism. Please see Customisation chapter 8. It is possible
that some form layouts will be adversely affected by the change to the
standard Windows proportional screen fonts, though this depends on the
way the forms have been defined. There is also scope for enhancement
by using the new facilities offered by PML, such as toolbars and docking
forms. Many of the AVEVA applications have been upgraded in this way,
so users who have revised the AVEVA applications should review their
changes in the light of this work.

User Bulletin
1-9
Introduction
1.11 Compatibility
(update) *sp3*
PDMS 11.6.SP3 AutoDRAFT and DXF output functions have been

designed and tested with AutoCAD 2004, 2005 and 2006. Final Designer
(version 1.3) is compatible with AutoCAD 2005 and 2006.
1.12 Notice of change in support status
(update) *sp4*
1.12.1 PDMS 11.4 and earlier

PDMS 11.4 changed to inactive support status in June 2006, which
means that it is not normally be supported with releases of any kind.
At the same time, all earlier versions were withdrawn, which means
that customers no longer have the right to use them. In exceptional
circumstances AVEVA may be prepared to negotiate continued use and
critical problem support.
Full definitions of support status can be found on
http://support.aveva.com/support/United_Kingdom/index.htm in the
section on PDMS releases.
1.12.2 PDMS 11.5
(update) *sp4*
PDMS 11.5.SP1 was superseded by 11.5.SP2 during summer 2006. It was

accompanied by an updated version of Global, 2.2.SP2: both should be
used together and are fully supported, with previous versions of 11.5 now
at inactive support status.
1.13 Future considerations

1.13.1 AutoCAD integration
(update) *sp4*
Final Designer interfaces with AutoCAD and may provide an improved

method of performing some of the older AutoDRAFT functions. However,
there is no longer any plan to withdraw AutoDRAFT. The DXF output
feature is also unaffected, though it may be less necessary in future.
1.13.2 Windows versions
(update) *sp5*
Microsoft Vista is not supported for PDMS 11.6: it is a major upgrade

and will require some significant changes, at least to installation
procedures. AVEVA has investigated the implications and will support it
User Bulletin
1-10
Introduction
for PDMS 12.1.SP1 (target May 2009) and subsequent releases. We will
drop support of Windows 2000 at the same release. Almost all
development at AVEVA is now carried out using Windows XP (service
pack 1, 2 or 3), which is currently the preferred option.
PDMS 12.0 also requires the installation of Microsofts .NET Framework,
in this case version 2.0. We expect to be using later versions of .NET for
subsequent releases.
1.13.3 Use of UNIX servers
(update) *sp5*
AVEVA has been supporting the use of Samba on IRIX servers to allow
users the opportunity to use their old servers for an interim period. This
is still supported for PDMS 11.6 but is not supported at the next major
release, PDMS 12.0, because of changes to allow larger PDMS databases.
Testing for PDMS 11.6 has used Samba 2.2.8a.
1.13.4 PML features
(update) *sp5*
Various changes are included in the next major release, PDMS 12. The
improvements to provide a more powerful customisation environment,
which complies better with Windows standards, mean that certain older
features can no longer be supported and will be removed: this may well
necessitate changes to some users PML applications. Those writing PML
applications should particularly note the following:
1.13.4.1
RADIO gadget
This gadget has been deprecated and has not been documented for
several years. It is no longer available in the PDMS 12 release. Any
usage should be replaced by the new FRAME and RTOGGLE gadgets,
which include its features and should offer a simple upgrade path.
1.13.4.2
RGROUP gadget
The RGROUP gadget, which replaced the RADIO gadget, has itself been
superseded by the radio group capability of the FRAME gadget in
conjunction with RTOGGLE gadgets. It still exists and continues to
work, but its use is discouraged; it will be removed in a future release.
1.13.4.3
Toolbar based OPTION gadget field reselection
Reselection of the selected field of an Option gadget on a toolbar will no

longer constitute a change of value. This provides better conformance
with expected behaviour in a Windows style GUI. The effect is that the

User Bulletin
1-11
Introduction
gadgets SELECT call-back will not be run (a SELECT event is NOT

notified to PML).
1.13.4.4
Form based OPTION gadget field reselection
Reselection of the selected field will no longer necessarily constitute a

change of value. There will be an optional attribute NoReselection,
which is the recommended behaviour (as for Toolbar option gadgets
above). However, the default is Reselection, for upwards compatibility.
1.13.4.5
LIST gadget field Reselection
Reselection of the selected field no longer necessarily constitutes a

change of value. There will be an optional attribute NoReselection,
which is the recommended behaviour (as for OPTION gadgets above).
However, the default is Reselection, for upwards compatibility.
1.13.4.6
SAVE and RESTORE using .bin files
Binary save and restore is to be replaced by the combination of session

layout serialisation files and view content (.disp) files.
1.13.5 Design Comparison with Schematics
*sp5*
PDMS 12 offers a new option for integration and comparison of 3D

designs with schematic diagrams, such as P&IDs, from a variety of
systems. This initially covers equipment, piping, and HVAC and will be
extended in future to cover electrical cable. As a result, the old Design
Compare option (Compare module) has been removed.
1.13.6 ISODRAFT symbol files
*sp5*
PDMS 12 has a change to the format of ISODRAFT symbol files

generated by DRAFT. Those used in version 11 or earlier will not be
readable by ISODRAFT, so they will need to be regenerated from the
DRAFT database. Manually created symbol files are not affected.

User Bulletin
1-12
PDMS GUI General changes

PDMS 11.6 uses the Microsoft .NET environment including WinForms
based user interface components. Using this state-of-the-art technology
enables docking forms and toolbars in PDMS and provides a robust
foundation for the future provision of standard application programming
interfaces.
All modules with a graphical user interface (GUI) now use this new
technology, which is presented in an Application Framework and has
several new or updated components. The use of docking windows and
toolbars means that PDMS will appear more familiar to users of
Microsoft Windows XP and Office and reduce the number of dialogs
obstructing the 3D graphical view, enabling more effective use of screen
space. Many windows are now resizable, simply by dragging their edges
or corners in the usual Windows manner.
PDMS 11.6 also enhances the database explorer and drawlist with the
addition of filters and a more intuitive interface and at SP1 a colour
picker for objects dragged from the explorer.
The use of .NET has a significant impact on the number of program files
that comprise each PDMS module. For example, Design now consists of
the following files: des.exe, des.dll, wrappers.dll and these make use of a
large number of other files, including a large number of other .dll files.
This will have an impact on the way that bug fixes are issued: in future,
it is likely that fix releases will be cumulative. For example, fix release
11.6.0.5 will include all the changes in the preceding 4 fix releases.
Further information is given in the PDMS Installation Guide.
2.1
Glossary
The new Application Framework introduces some new concepts and
terminology, which are introduced here, along with other terms used in
this document. PDMS terminology is covered in the Getting Started with
PDMS manual.
Add-in
An add-in provides a means of adding functionality.

An add-in application appears on the Applications
menu, which provides a method of switching to it.

User Bulletin
2-1
CE
Current Element the single PDMS object that is

acted upon by the PDMS command line and by many
of the user interface gadgets. See Selection.
Combo box
Standard Windows control that combines a text box

and interdependent list box.
Culture
The .NET term for the various local settings for

language etc. similar to the Windows locale.
Docking
This describes windows and menu bars that can be

attached in appropriate places to the frame of the
main PDMS window.
Dockable
Drag-and-drop
Select with mouse and then drag (holding the mouse

button down) to a different place.
Form
Input window see window.
MDI
Multiple document interface: a set of child windows

constrained to a single primary or parent window.
Menu bar
A horizontal bar below the title bar containing menus.
My Data
A new storage area for remembering PDMS data for

future use. Typically used for IDLists to copy from
one module to another.
Selection
Many of the user interface gadgets can now work on a

selection of objects defined using the 3D graphical
view.
Shortcut menu
This context sensitive pop-up menu is activated by

use of the secondary (usually right-hand) mouse
button.
Tab control
Allows multiple, usually related, forms (windows) to

be overlaid, with a simple switching mechanism
similar in appearance to a notebook or file divider.
Tabbed form
Title bar
The top, containing a title, of any particular window,

which can also be used to drag the window.
Toolbar
A frame containing controls, typically icons, to trigger

GUI actions
ToolTip
A small pop-up window containing descriptive text,

which typically appears when hovering over an icon.
Window
A separately controlled area of the screen. PDMS has

one primary or main window and many secondary
windows: some of these are often called forms.

User Bulletin
2-2
2.2
Application framework
The PDMS 11.6 application framework provides the primary or main
application window with its associated main menu bar and toolbars as
well as support for docking windows. The framework also allows for
applications to be extended via the use of Add-ins, such as the Explorer,
and provides a GUI, based on the Microsoft Office 2003 look and feel.
2.2.1 Toolbars
The application framework supports toolbars, which can be floating or
docked to any of the sides of the primary window. Picking the title bar of
a toolbar and dragging away from the window frame will undock it.
Dragging it back to an appropriate place will re-dock it. The position and
state of toolbars and other windows are automatically saved between
sessions.
Note. Some toolbar tools cannot be displayed when a toolbar is docked
vertically.
2.2.2 Dockable Windows

The application framework supports the creation of dockable windows.
These may be dragged in a manner similar to toolbars and docked on any
side of the primary window. They may also be unpinned, so that they
auto-hide when not in use.
2.2.3 Floating Windows

Graphical views are contained in windows that can be floated via a
shortcut menu on their title bar. These floating windows can then be
placed on a different screen to the primary window.
2.2.4 Status Bar

The status bar consists of the following items:
An area for user prompts
A number of buttons to allow quick activation of MDI windows.
Current Date
Current Time.

User Bulletin
2-3
2.2.5 Session Settings

Various user interface settings for each PDMS module are automatically
saved in files in the directory defined by the PDMSUSER environment
variable. They can thus be restored on the next entry to that module,
even between PDMS sessions. These settings can safely be reset to the
default value by deleting the relevant file. This process is called
Serialisation in Microsofts .NET environment and includes:
Layout of windows including their docking state
Explorer Settings
Element History including the CE
In general, the position and state of forms will be saved on exit from a
module and restored next time the user enters the module. This does not
apply to the contents of the main windows such as the 3D view, for which
the existing display binary save and restore mechanism may be used.
There are other exceptions: for example, the 3D view is not shown in
Draft until required, though its position is saved.
2.3
Tabbed Graphics form

The user interface for Graphics has been completely overhauled using a
standard Windows tabbed dialogue form to replace the original forms.
Many minor improvements have also been incorporated.
The new Graphics Settings form contains options previously on the 3D
View Options, Colours, Representation, Steelwork Representation, P-line
Representation and P-point Representation forms.

User Bulletin
2-4
The Load Settings and Save Settings buttons load from and save to the
options files stored in %PDMSUSER%.
The Design bar menu has been changed to remove references to old
forms and to call the new one. The Graphics Settings form is accessible
from Settings > Graphics
2.4
Database Explorers
Explorer views have now been extended from the Design Database to
cover other modules and databases. The Application Framework
manages their layout and dockability. They provide a consistent tree
view of each database and module specific context menus.
An important feature of the Explorers is the ability to allow flexibility in
the presentation of the database hierarchy through the use of filters.
These are different sets of filters for different Databases. Additional
filters and other Explorer options are available on an Explorer Settings
form. The user may Drag-and-drop elements within and outside the
Explorer.
There is now a separate Toolbar Add-in, which shows the current
Element History.
Explorers are available in the Design, Draft, Spooler and Isodraft
modules, and replace the PML-based Members Lists. They are available
from the Main Menu>Display menus in each module. Each Explorer is
restricted to Elements of a particular database type.
2.4.1 History
The History Add-in appears on the main toolbar in Design, Draft, Spooler
and Isodraft. It displays the current element (CE), regardless of the
database.
The user can set the CE either by typing the element name into the
combo box, selecting a previously typed in element from the drop-down
list, navigating through the CE history one element at a time using the
backwards and forwards buttons or by selecting elements from the CE
history list using drop-downs on the backwards/forwards buttons.

User Bulletin
2-5
When typing into the combo box the system attempts to auto complete
the name by scanning the open databases for the first 15 matches and
displaying them in a pop-up list. The user can then either carry on
typing or select an element from the list. When docked vertically the
toolbar displays only the backwards and forwards buttons; the combo box
is not displayed.
2.4.2 Explorer Settings

The Explorer Settings form is used to configure the behaviour of the
Explorer and set additional filters. It can be found, where appropriate,
from the Main Menu: Settings > Explorer
The settings are remembered between sessions for each user and module.
All options are turned off by default apart from Expand to CE which
causes the Explorer tree to expand, if required, to show the CE whenever
the CE changes. A very useful option is Auto Collapse Tree, which
applies to all active Explorers. If this is on, any expanded node not
containing the CE is collapsed whenever the user changes CE.
The remaining options apply to either the Design Explorer or the Draft
Explorer. They control the visibility of elements: they can set elements
as always hidden (e.g. non-writeable Template Worlds and LIBYs) or
allow previously hidden elements to be shown in the hierarchy (e.g.
TUBI, ROD and Point Worlds).
2.4.3 Filters
A predefined set of database filters is available to reduce the volume of
information presented in the Explorers. These can be selected and
turned on and off from each Explorer. When filtering is off the complete
database hierarchy is displayed in the Explorer. Only one system filter
can be active at any given time for each Explorer. Additional preset
filters are provided via the Explorer Settings Form (see above) for
special case elements. These can be toggled on/off regardless of
whether the system filters have been set.
2.4.4 Copy rules

An element (source) may be copied within the Explorer either by Dragand-drop, context menus or the keyboard shortcuts CTRL+C / CTRL+V
either beside or below another element (target). Paste beside copies the
element after the target.
For a copy to be valid the following must be true:

User Bulletin
2-6
The relevant MEMBER attribute is settable: with that of the target

element (if below) or its owner (if beside).
The source element type is an allowable member type for its new
owner.
If either of these rules is broken, the Paste is invalid. TUBI elements

cannot be copied or moved since they are implied by the system.
Users may add their own additional checks by adding code to the
following PML function:
IsCreatable.pmlfnc
This logical function is stored in %PMLLIB%\common\functions

directory and is called before the Copy.
2.4.5 Drag-and-drop
The Explorer supports Drag-and-drop within the Explorer to copy
elements, Drag-and-drop into the 3D view to add elements to the Draw
List and Drag-and-drop into My Data to add elements to it.
2.4.5.1 Drag-and-drop within the Explorer
Selecting an element and dragging it, with either the primary or
secondary mouse button down, initiates Drag-and-drop.
Single elements may be moved or copied within the Explorer using

Drag-and-drop (apart from TUBI if they are shown)
Copy rules are applied to validate the Copy (see above)
Hovering over a node causes it to auto-expand.
The mouse pointer icon changes to notify the user of an invalid copy
(e.g. between databases)
All child elements are transferred with the dragged item.
The Drag-and-drop action can be cancelled by pressing ESC at any

time before dropping.
A divider bar appears between elements to show where the dragged

element will be inserted if dropped, i.e. before, after or below.
Dropping directly onto an element assumes that the dragged

elements are to be added to the beginning of the elements child list.
Pressing CTRL whilst dragging performs a copy action.
Copy Drag-and-drop is indicated by an arrow + plus icon.
Copied elements and all their child elements are copied.

User Bulletin
2-7
All connectivity attributes are lost in the copied elements.
The names of all copied elements which are named are prefixed with
Copy-(n)-of- (including copies of copies) where n >=2 (the first copy
will have the prefix Copy-of-.
Copy and Paste are available on the Explorer context menus.
After selecting an element and doing a Copy, the user may select a valid
owning element and add the Copied element to it using Paste or select a
valid sibling element and insert the Copied element after it using Paste
Before or Paste After. Paste is greyed out if the Copy is invalid
Alternatively the user can perform Drag-and-drop with the secondary

mouse button down. On mouse up, a context menu appears from
which the user can select a valid Copy or Cancel.
Finally, the user can use the CTRL+C and CTRL+V shortcuts to Copy
and Paste respectively.
2.4.5.2 Drag-and-drop into the 3D view

This allows the user to add elements in the Explorer to the Design
drawlist by Drag-and-dropping from the Explorer to the 3D view.
The user can select only single elements for drag & drop.
All significant elements will be added to the drawlist along with the
dragged element.
The elements can be dropped anywhere within the 3D view.
Elements cannot be dropped into place; they will appear in their

correct 3D positions.
The mouse pointer icon changes to notify the user of invalid moves
The Drag-and-drop action can be cancelled at any time before

dropping, by pressing ESC.
2.4.5.3 Drag-and-drop into My Data

This allows the user to add elements to My Data by Drag-and-dropping
from the Explorer into either the Collections or Contents grids in My
Data (q.v.)
The user can select only single elements for Drag-and-drop.
Dropping into My Data is equivalent to the Add to My Data context

menu.
Depending on where it is dropped, the dropped element is added

either to an existing Collection or as an orphan

User Bulletin
2-8
Child elements will not be added to My Data.
2.4.6 Mouse Actions

Primary mouse click:
Selects element, sets CE, (also expands/contracts tree if on node icon)
Primary mouse double click:
Selects element, sets CE, expands/contracts tree below element
Secondary mouse click:
Selects element, sets CE, displays context menu.
2.4.7 ToolTips
Name, Type and Description are shown in ToolTips over each Element.
2.4.8 Updates
The Explorers are kept in step with the database and CE. So, whenever
the user does the following the Explorer is updated:
2.5
Change CE
Create/Delete element
Rename element
Reorder / Include element (Copy/Paste)
UNDO / REDO
Getwork
MDB Update
Claim
Anything else that changes the state in the Explorer.
Drawlist
The Drawlist at 11.6 is a separate dockable window, managed by the
application framework, and replaces the previous Drawlist, which was
part of the Explorer.
It appears only in the Design and Spooler modules and provides
information about all elements currently added to the 3D View. It allows

User Bulletin
2-9
modification of the visual properties of the displayed elements, such as

visibility, translucency and colour. It also allows the user to add selected
Elements to My Data either from context menus or Drag-and-drop.
2.6
My Data
The My Data Add-in is a dockable window, managed by the Application
Framework, which provides a place for users to gather, organise and
perform operations on all the data they require to complete their tasks.
It contains collections of PDMS database Elements and single Elements.
My Data is particularly useful for the transfer of Design Drawlist
elements into Draft for the population of Drawings.
The user can add items to My Data in a number of ways: via context
menus on other components or via Drag-and-drop from other
components. The contents of My Data are persistent and are
reconstructed each time the user logs in. It is available in Design, Draft
and Spooler modules from the Main Menu>Display menus.
It consists of 3 components, namely a Collections Grid, an Actions Group
and a Contents Grid. The Actions Group and Contents Grids are
collapsible.
2.7
UNDO / REDO
The operation of UNDO and REDO has now been extended and is now
available to PML programmers for use in their applications. For details
of the latter, please refer to PDMS Software Customisation Guide section
8.3.7 UNDO and REDO.
Please note that UNDO is not yet available in modules other than
DESIGN & DRAFT.
2.8
Information about Global network status
*sp4*
It is now possible to Query the communications status of remote Global

locations in Design, Draft and Spooler. A form similar to that for
Remote > Locking and Isolation in Admin allows the user to query
Communication status and Project Lock and Isolation.
These queries are available from the Query menu:

User Bulletin
2-10
They result in the following forms, which behave in a manner similar to

the admin forms.
The user can ping locations by selecting them and using the Apply button
and then Sort and Filter results. Results are appended until the Clear
Results button is pressed.
The user can check locations by selecting them, toggling Lock, Isolation
or both and pressing the Apply button. The status will be displayed
below.

User Bulletin
2-11
PDMS Design Changes

The Locator Handle, which manipulates the 3D model, has been
enhanced to work in a variety of ways in a context sensitive manner.
The new Piping editor includes a Pipe Routing Handle. Piping designers
can route pipes interactively by dragging this Handle in the 3D graphics
view and snapping to element features. The interface includes extensive
graphical feedback to assist the designer and makes the pipe routing
process easy to learn and use, and very quick in operation.
The Locator Handle also provides features specific to piping components.
For example:
constraining the movement of piping components to the route of

the pipe
intelligent connection to nozzles and other piping components
moving groups of connected piping components.
Piping designers can now create piping components through a new

interface that uses docking windows to improve use of screen space. The
new interface allows rapid creation and placement of components in a
highly intuitive way, by interacting with the 3D graphics view. They can
also produce check isometrics (on screen or paper) from within Design,
thus simplifying the process of ensuring that the correct documentation
will be produced.
PDMS 11.6 extends graphical interaction to primitives below equipment
and sub equipment, thus enabling the manipulation of, for example,
nozzles using the Locator Handle.
In addition, many of the Design forms have been improved by using the
new facilities of the PDMS Workspace, such as tabbed forms.
3.1
General GUI improvements

Many forms in Design have been improved, for example:
The Query form is opened by selecting Query > Attributes from the main
bar. It has been made docking and resizable to allow easier viewing of
query results. The Query > General form has been removed.
The Query Project form is a tabbed form that replaces the existing User
List, Team List, DB List, MDB and Stamp List forms. It contains a tab

User Bulletin
3-1
PDMS Design Changes
that shows the information that was previously shown on each individual
form.
The alpha view in the Data Consistency Check form no longer receives
the I/O requests channel when its not needed. The layout of the forms
has been improved.
The View Control form has been made dockable the menu bar has been
replaced by buttons, with some of the functions, changing the
background colour of views and deleting views, available on a shortcut
menu.
The layout of the Report Template form has been tidied up and tabs are
now used instead of spaces to align columns in the list. After input from
users, minor changes have been made: the form is not closed when a
report is saved; the user is asked to confirm before overwriting the
current data when modifying/creating a report; the user is asked whether
they want to quit without saving the current template when clicking on
the close icon.
The Penetration Defaults form now uses tabs for its three sections.
The Template Browser form has been made dockable. If open when
Design exits, its now opened when Design restarts. The Control > Select
CE TMPL menu option has been replaced by the CE TMPL button and
the Display > Selected Template has been replaced by the Display
button.
A new form, Data Access Control, has been created to replace the User
Rights form and add information previously found only on the Element
Data Access Control (DAC) Errors List form in the Model Management
product. The form has two tabs, displaying the information previously
shown on the two forms. The first, User Rights, shows the Access
Control Rights that apply to the current user, and information about
their scopes and roles. The second, Element Access, allows the user to
specify an element; for each attribute, it displays whether the user can
modify that attribute and the error message that occurs if not. It also
shows the operations (Claim, Issue, Drop, Create, Delete) the user is
allowed to carry out on that element. The form is shown by selecting
Query > Data Access Control from the bar menu.
Toolbars have been added to the Hangers & Supports application to

replace the current forms: the Utilities > Toolboxes > General and
Utilities > General > Support Creation menus now indicate whether the
toolbars are shown and toggle their visibility.
The Router forms, PDMS Router, Routing Messages and Branch Detail,
have been made resizable. This means there is no longer a need for a

User Bulletin
3-2
PDMS Design Changes
means of resizing the forms by rebuilding them, so the forms associated

with that have been removed.
3.2
Element Selection
(update) *sp4*
Unlike PDMS 11.5, element selection behaviour is similar whether or not

Model Editor (Modify) mode is in use: the graphical selection set is
highlighted at all times. [Note: this selection set is not necessarily the
same as the Current Element or the object highlighted in the Explorer.]
The highlighting differs according to the elements Read/Write status: the
default edge highlighting being Dashed Green for Read/Write and Dotted
Red for Read only. When in Navigate mode (Model Editor not being
used), the selected objects cannot be changed, so all objects appear in the
Read/Write highlighting, even if they are Read only.
A more detailed description of selection is given in the Graphical Model
Manipulation Guide Chapter 2.
Model Editor button toggles between Navigate & Modify modes

There are two options for entering Modify mode. The first way is to click
on the Modify button; the second is to use the pull-down menu
Edit>Model Editor. The same two options are used to leave Modify mode.
When in Modify mode with object(s) selected, a handle appears on the
selection, which denotes the current interaction mode and guides the
user to possible operations. The most appropriate handle is chosen
whenever the selection changes. Where an alternative handle is
available, the pop-up menu will allow the user to change from (for
example) to a 3D handle from the constrained one.
The objects selected by a graphical pick depend on the application, the
Navigate/Modify mode and on various settings.
Navigate to Element button toggles Equipment selection level

This toggle is available in Navigate mode only: when selected, the pick
will select objects at equipment primitive level. When not selected, the
selection will be at Equipment level.
If you wish to edit the equipment, there is a further popup menu Edit
Equipment while in Model Editor mode see below.
In the piping application, related objects are selected by default. For
example, if a user selects a valve, the system by default selects the
flanges and gaskets connected to the valve. If only a single object is
required, the shortcut menu option Select CE can be used.
User Bulletin
3-3
PDMS Design Changes
N.B. A status bar prompt (e.g. Identify Nozzle) appears when the system
expects a 3D pick. If you wish to escape from this, it is necessary first to
click in the 3D window.
3.3
Quick Pipe Routing

The quick pipe routing function allows the user to define the path of a
pipe wherever there is an ill-defined route within a branch, i.e. where the
dotted line is displayed instead of implied tube.
In defining a route the system will allow the user to perform the
following:
Orthogonal and non orthogonal leg definition
Positioning:
o Increment snapping
o Explicit positioning
o Feature snapping
Centre line
Offsetting by OD of tube (including insulation)
Automatic completion of route

o Where completion is predictable
UNDO/REDO changes
Where an extremity of a route is undefined, the system will allow the

user to assign the end to the last defined point within the route or to
designate an appropriate element to which the extremity is connected.
Note:
Where a component can not be selected from the spec, the shows a
blob to alert the user but does not display any other error alert.
3.3.1 Improvements for PDMS 11.6.sp3
*sp3*
Several usability improvements have been made to Quick Pipe Routing.

These include the following.
Connection errors are handled better.
The router tries to resolve the appropriate configuration of components
when it creates a component, e.g. creating a flange will try and create the
gasket as well. Under some circumstances, where the router cannot

User Bulletin
3-4
PDMS Design Changes
connect and position a component with the minimum spool length, the
system will now return: Incompatible Connection error.
Set Branch option now sets the current spec of the branch into the form,
so that all component Selection is from the branch spec.
Equal size tees with PBOR3 set to E in the relevant column of the spec
no longer give a warning message.
See also fault corrections section 11.5.
3.4
Pipe Component modification

The pipe component modification function allows the user easily to rotate
or position a single component or selection of connected components
within the constraints of a pipe route.
In modifying a component or components, the system offers the following
functionality:
Rotation about the tube centre line
Constrained positioning along the path of the pipe route:
o Increment Snapping
o Feature Snapping
Components can only be repositioned where there is sufficient space to
fit them in the route
Automatic reorder of the elements within the hierarchy to suit the new
position within the pipe route
The ability to reposition the handle within the constraints of the
component selection set (along the centre line of the pipe)
The initial orientation of a selection is maintained where possible
UNDO/REDO of changes
The system does not try to resolve any inconsistencies that may occur
from the repositioning of a component, e.g. if a reducer is moved into
another leg of a branch, the components and tube between its original
position and new position in the branch will remain the same.

User Bulletin
3-5
PDMS Design Changes
3.5
Pipe Component creation

The new pipe component creation form allows the user to create a
component or component group that is either connected or positioned
along the route of a pipe.
The system will automatically try to create a set of predetermined
adjacent component types when certain component types are created, e.g.
creating a valve will try to create the appropriate adjacent gaskets and
flanges. This allows the pipe designer to define the major components of
the pipe route, with the system creating the secondary components
automatically.
Once a component (or group of components) has been created the system
will automatically select it, allowing the user, when in Modify Mode, to
modify the components position or rotation.
3.6
Pipe Component Reselection

Pipe components may be individually reselected using the reselection
form.
3.7
Equipment Editing
Equipment primitives may now be repositioned using the Equipment
editing mode of Model Editor. This involves drilling down the
hierarchy to the template, sub-equipment, primitive or negative
primitive required.
This mode can be entered by selecting an equipment item and using the
pop-up menu to pick Edit Mode > Equipment Editing.
To help selection, when an element in the equipment hierarchy is
selected it is drawn solid, together with its children, and the rest of the
drawlist is made translucent. When a positive primitive is selected, any
negative primitives that it owns are drawn in wireline, which allows
them to be picked: this would not be possible in HOLES ON mode.
3.8
Design Areas
These are 3D volumes encompassing a portion of the plant model. For
example, they might encompass a process or part process that can be
worked on in isolation. In some industries, they are usually regularly

User Bulletin
3-6
PDMS Design Changes
shaped and aligned with major plant axes; in other cases, they are more
likely to be irregularly shaped, positioned and orientated.
New Design Database elements (top level AREAWL, AREASET,
AREADEF, ABOX, ACYLI, ACONE, ADISH, ASLCY, ACTOR, APYRA
and ASNOU) have been added for modelling Design Areas. These
primitives are defined in a similar manner to the normal equipment
primitives. Clash detection may be used to determine the contents of
these areas.
Which plant item origins are in a given Area?
For a given item, which Area(s) contain its origin?
Collections have been enhanced to reference Areas: some of the geometric

operations have been improved, including an EXCLUSIVE option for
WITHIN.
These Areas will be used in future PDMS applications and for improved
integration with VANTAGE Project Resource Management.
3.9
New Piping Pseudo Attributes

Several new pseudo attributes are now available for piping.
3.9.1 Branch Surface Area

BRIARE/A
Branch internal area.
BREARE/A
Branch external area.
These provide an approximate inside & outside surface area for piping
and are valid for PIPE, BRANCH, BRANCH members and SPOOL
elements. The following assumptions are made:
A Bend or Elbow is treated as a torus; any other Branch Element

is treated as a cylinder or cone.
If the CMPR on the SPCO is set, the OUTD (Outside Diameter) or
ACBO (Actual Bore) will be used, otherwise P-Arrive and P-Leave
bores and outside diameters will be used.
Insulation is ignored.
3.9.2 Range of Angles or Radii

RANANG/LE
Range of available angles. (Optional noun argument)
RANRAD/II
Range of available radii. (Optional noun argument)

User Bulletin
3-7
PDMS Design Changes
These pseudo attributes, valid for branch and branch members, provide a
list of available angles or radii for selecting bends and elbows. The
information is derived from the branch PSPE and the bore of the
previous element in the branch (head bore if the first element). The
result comes from the ANGL or RADI, if appropriate or is returned
unset.
3.9.3 Data Consistency

This set of attributes gives a measure of the quality of the pipe route:
bores, connection types, offset and angle between a P-point and its
neighbour are checked.
AQANG
Angle between a branch component and its previous

component. Calculates angle between the P-point
directions and also with the vector between the Ppoints and uses the greater.
SPKBRK FALSE ATTAs are ignored
LQANG
Angle between a branch component and its next

component. Calculates angle between the P-point
directions and also with the vector between the Ppoints and uses the greater.
SPKBRK FALSE ATTAs are ignored
AQOFF
The offset between a branch component and its

previous component. Returned in distance units.
SPKBRK FALSE ATTAs are ignored.
LQOFF
The offset between a branch component and its next

component. Returned in distance units.
AQCON
Returns true if the connection between a branch

component and its previous component is correct.
Is also valid when CE is TUBI.
LQCON
Returns true if the connection between a branch

component and its next component is correct.
AQBORE
Returns true if the bore between a branch component

and its previous component is the same.
Does not consider TUBI.

User Bulletin
3-8
PDMS Design Changes
LQBORE
Returns true if the bore between a branch component

and its next component is the same.
PQANG <int>
Angle between specified P-point of a branch

component and its adjacent component. Calculates
angle between the P-point directions and also with
the vector between the P-points and uses the greater.
Attribute is valid for Branches. For branch members,
only the arrive & leave P-points are valid.
PQOFF <int>
The offset between specified P-point of a branch

component and its adjacent component. Returned in
distance units.
PQCON <int>
Return true if the connection between a branch

component and its adjacent component is correct.
PQBORE <int>
Return true if the bore between a branch component

and its adjacent component is the same.
3.10 New Attributes for Material Management

The following attributes have been added, primarily to facilitate
integration with VANTAGE Project Resource Management (VPRM).
3.10.1 Status attribute for use in MTO output

A new attribute, FSTATUS, has been added to the following elements:
PIPE, STRU, EQUI, REST, ZONE, PCOM, ATTA, SPLDRG, SPEC
User Bulletin
3-9
PDMS Design Changes
3.10.2 Additional attributes for spool MTO

The following attributes have been added to the SPLDRG element:
FAREA, FPLINE, FDRAWING, FREVISION, FRDRAWING
3.10.3 Additional attributes for Piping Specifications

The following attributes have been added to the SPEC element:
FISSUE, FINPUTBY
3.11 Extract Refresh

Modifications in PDMS can cause the Spatial map for an Extract to
change, resulting in the Map being updated on entry to Design. As a
result the User will now need to do a SAVEWORK to save the changes
before an EXTRACT REFRESH command can be executed.
3.12 Add to Drawlist tool bar
*sp1*
This enables the user to specify the visual properties of items added to
the drawlist, for example by dragging from the Explorer to the 3D view.
The options are Auto (rule-based) or Specific (colour, translucency and
edges on or off).
3.13 Piping component (e.g. flange) alignment
*sp1*
This development allows piping components to be connected so that by

default their Z directions are aligned. This is particularly useful for
ducting and cable trays etc. or where flanges need to be aligned. The
following changes have been made:
A PZAXIS attribute has been added to various ppoint elements in

the catalogue.
New pseudo attributes allow it to be queried in the design.
The connect command has been enhanced to use the PZAXIS if set.
Appropriate Datacon checks have been added.

User Bulletin
3-10
PDMS Design Changes
3.13.1 New attribute for PTCA, PTAX, PTMI, PTPOS

PZAXIS Z direction
3.13.2 New pseudo attributes for branch members
PZDIR Alignment direction for specified ppoint.
AZDIR Alignment direction for arrive ppoint.
LZDIR Alignment direction for leave ppoint.
PQAANG Angle between alignment direction for specified ppoint

and adjacent component.
AQAANG Angle between alignment direction for arrive ppoint

and previous component.
LQAANG Angle between alignment direction for leave ppoint

and next component.
3.13.3 Connection Command

The syntax of the command is unchanged, but it now uses valid
alignment directions in place of a default orientation. It checks that a
PZAXI is set for the relevant ppoint of the current element and for the
ppoint it is connecting to. If the element being connected to is a gasket or
a weld and does not have a set PZAXI then the ppoint of the next
element is used instead. If there are either one or two unset alignment
directions, then the connection command functions exactly as before. If
an orientation is specified, e.g. CONNECT AND P3 IS UP, then this will
override the alignment direction.
3.13.4 New Datacon warning messages

The following warnings can now be generated. They are not output if the
branch is badly routed.
D850 BAD ARRIVE ALIGNMENT GEOMETRY, ANGLE IS 15
D850 BAD LEAVE ALIGNMENT GEOMETRY, ANGLE IS 45
3.14 HVAC application new components
*sp1*
The range of components supplied with the standard application has

been increased.

User Bulletin
3-11
PDMS Design Changes
3.15 Pipe bending checks
*sp4*
PDMS 11.6.sp4 allows you to check pipe pieces and pipe spools for
production readiness against welding machines, bending machines, pipe
cut lengths on drawings and reports, and defined stock-lengths of tubing.
Fabrication checks run against available stock length and fabrication
machines.
Fabrication machines are currently limited to bending and auto
welding.
These checks rely on a number of changes to the Design database that
were introduced at PDMS 11.6.sp1. They were initially introduced for the
marine product.
Pipes designed and checked in this way may be detailed using the new
pipe-sketch facility but not yet with Isodraft. Please see section 5.8.
3.15.1 Definitions
Pipe Piece
A pipe-piece is the lowest level of fabricated item in the pipe. It relates to
a continuous piece of pipe tube that can be fabricated from stock
material.
The pipe piece holds references to the components at the start and end of
the piece. The system derives pipe-pieces: users cannot create or delete
them. Note that components on the end of the pipe pieces are not part of
the pipe piece, but are referenced by it.
Pipe Spool
A pipe spool is a prefabricated part of a pipe or branch, often welded
together in a workshop before being sent to the ship to be fitted on-site.
Pipe spools typically comprise a bent pipe with welded flanges at each
end, but they can also be more complicated fabrications with branches,
reducers and other components.
The system derives spools: users cannot create or delete spools. PDMS
11.6 does not include gaskets in the spool.
3.15.2 Design Database additions
(update) *sp4*
These elements were added to the database for PDMS 11.6.sp1, but were
unused until sp4.

User Bulletin
3-12
PDMS Design Changes
3.15.2.1
Design grid
New top level element GRIDWL: used for ship coordinate system but not
used in PDMS 11.6.
3.15.2.2
Fabrication machine definitions
New top level element FMWL.

3.15.2.3
Pipe pieces & pipe spools
New elements PPLIST (Pipe Part list) & PSLIST (Pipe Spool list).
3.15.3 Production Pipes Check Form

To check pipe spools for production readiness, you need to be in the
Design module and running the Pipework application. To display the
Production Pipe Checks form, choose the Utilities>Production Checks
option from the main menu bar.
If appropriate, you will be prompted to select a PIPE (using the Explorer
or 3D View) and then generate spools if this has not yet been done:
Once this is done, the main form will be displayed: it has five sections
that allow you to control different aspects of the production check on the
pipe and its spools:
Spools for the currently selected pipe
Tasks relating to the entire pipe
Tasks relating to the currently selected spool
Navigation relating to the currently selected spool
Options for setting up production checks.

User Bulletin
3-13
PDMS Design Changes

User Bulletin
3-14
PDMS Design Changes
3.15.3.1
Pipe Tasks
Option
Function
Validate Pipe
Runs production checks against entire

pipe. The checks run for each spool in
the pipe that requires validating
View Production Information
Displays the production information

currently associated with each pipe
spool and pipe-piece
Remove Machine Info
Removes machine fabrication

information from all pipe spools and
pipe-pieces in the pipe
3.15.3.2
Spool Tasks
Option
Function
Validate Spool
Runs production checks against the

selected spool
View Production Information
Displays production information

currently associated with the spool and
its pipe-pieces
Remove Machine Info
Removes machine fabrication

information from the selected spool
3.15.3.3
Navigation
Option
Function
View Spool in Graphics
Sets up 3D View so the selected spool

fits in it
3.15.3.4
Setup Production Checks
Option
Function
Select Default Fabrication

Machines
Allows you to define the fabrication

machines to use when running
production checks against pipe spools
Define Auto-Resolve
Preferences
Sets options for automatically adding

any excess needed as a result of a check
against a bending machine
Define Stock Length
Sets up length used in checks

User Bulletin
3-15
PDMS Design Changes
3.15.4 Setting up Production Checks

You run production checks against fabrication machines and tube stock
lengths you define using the options on the Setup Production Checks
section of the Production Pipes Check form.
3.15.4.1
Select Default Fabrication Machines
If a pipe-piece does not have a bending- or welding-machine associated

with it when the production checks run, the system checks the pipe-piece
against all machines selected in the default machine list. This allows the
system to identify and assign fabrication machines.
To define the default bending- and welding-machines to use in production
checks, click Select Default Fabrication machines. The lower pane displays
a selectable list of the available fabrication machines.
Select the machine you want to use and click Apply; if you want to cancel
the operation, click Back.
To avoid choosing incompatible machines, you can pick out fabrication
machines that can handle the pipe tubing in the selected spool. The
system checks the bore, material, and length of the tubes to see which
machines can handle the spool. To do this click For Spool x, (where x is the
number of the selected spool) and the lower pane changes to display a list
of the machines that can handle the pipe tube in the selected spool.

User Bulletin
3-16
PDMS Design Changes
Select the machines you want to use from the list and then either append
them to the current default machine list by clicking Append to Default
Machine List, or replace the entire list by clicking Replace Default Machine
List.
Clicking Back will take you back to the previous screen.

3.15.4.2
Define Auto-Resolve Preferences
To define auto-resolve preferences click Define Auto Resolve Preferences.

The lower pane changes to display the available preferences:
If you check Include End Excess the system adds excess pipe to the end of
the pipe-piece if needed. If you check Include Feed Excess the system adds
feed excess to the pipe-piece if needed.
3.15.4.3
Define Stock Length
The system checks the final cut length of a pipe-piece against the available
stock length.
To define the stock length click Define Stock Length. This opens an edit-box
you can use to change the stock-length value: Enter the new value then
click Apply to accept the value, or Back to cancel and reset the form to the
previous value.
3.15.5 Running a Production Check

To run a production check against every spool in the pipe you want to
validate, click Validate Pipe; to run the checks against a single spool, click
Validate Spool. These options run the production checks and show the
results in the lower pane of the form.
Production checks run using the fabrication machines associated with the
individual pipe-pieces of the spool.
If no machines are associated with a pipe-piece, then the system checks it
against all machines defined in the default machine list.
When the checks have run, the spool list at the top of the form displays the
results of the check for each spool. This can be one of the following three
states:
State
Meaning
Successful
Production checks were successful.
Failed
Some part of the production check failed.
Valid for production
Spool had already been validated so was not

rechecked.

User Bulletin
3-17
PDMS Design Changes
The lower part of the form shows the results for each pipe-piece of the
selected spool.
A list of pipe-pieces shows the production check results per piece, and each
piece has one of the three states above associated with it.
Selecting a pipe-piece from the list displays the detailed results of the
check below the pipe-piece list. The information displayed in this part of
the form depends on the results of the check. Some examples of different
results follow.
3.15.5.1
Successful Check with no Modifications
You will see this result where the check succeeded against both bendingand welding-machines, if these machines were required, and the pipepiece didnt have to be modified.
The results panel shows which, if any, bending machine was used and
which flanges, if any, can be pre-welded.
3.15.5.2
Successful Check with Modifications
In the different example below, you can see the check succeeded against
both bending- and welding-machines, and some excesses were needed to
make the pipe piece pass the checks.
As well as the bending and welding machine information there is a list of
excesses the pipe required. In the example above, you can see BM1 is
suitable for bending the tube, no flanges can be pre-welded, and both the
arrive and the leave of the tube required excesses. For each excess there is
a link-label for the type of excess.
If you click on this link the excess shows a tag in the graphics view so you
can see where it applies to the pipe-piece.
3.15.5.3
Failed Check with Modifications Required
If the pipe-piece requires excesses to pass the checks but you have set up
the auto resolve preferences not to include excess automatically, then the
check will fail. In this case the results display the excess required. You can
accept these excesses to make the pipe-piece pass the checks.
You can also set the pipe to be manually bent and so ignore bending
checks.

User Bulletin
3-18
PDMS Design Changes
3.15.5.4
Non Resolvable Failure
The pipe-piece may fail the production checks for a more serious reason.
For example, it may not be possible to find a bending machine that can
handle the pipe tubing the pipe-piece uses.
In this case the results panel shows the system cannot resolve the failure
by adding excess. To overcome this, you can set the pipe-piece to be
manually bent.
3.15.5.5
Stock Length Failure
If the pipe-piece also fails a stock length check then this is reported in the
lower part of the panel.
3.15.5.6
Expanding Machine Results Panel
You may be able to expand the bending machine and welding machine
results in the results panel, to display more information. If there is more
information to view then the Expand icon appears by the Bending Machine
Result title. Clicking the title or the icon expands the bending machine
results.
3.15.5.7
Modifying Production Information
You can also modify the production information applied to the pipe-piece.
Click Modify Production Information to display the required panel.
Use this panel to change the bending or welding machines and modify the
end excesses or apply minimum feed to a leg.
3.15.5.8
Changing or Assigning a Machine
To change or assign a bending or welding machine click the appropriate

link. If no machine is associated with the pipe-piece then Change bending
machine will read Assign Bending machine.
If the tube is straight, there are no bending machine options. If there are
no pre-welded flanges, there are no welding machine options.
Select the required machine then click Apply. To cancel any changes and
go back to the previous panel, click Back.
After selecting a new machine click Accept Changes at the bottom of the
panel to accept the changes.
3.15.5.9
Editing End Excess
To edit the end excess first expand the collapsible panel by clicking End
Excess.

User Bulletin
3-19
PDMS Design Changes
You can add your own end-excess by entering a value in the User Defined
text box.
Click Accept Changes to accept the new value.
3.15.5.10
Applying a Minimum Feed to a Leg
To view the feed excesses applied to a leg between two bends, click Feed
Excess to expand collapsible panel.
For each leg there is an editable text box in which you can enter a
minimum feed value for the leg. If you enter a new minimum feed value
for the leg then the system recalculates the feed excess the next time it
checks the pipe-piece.
3.15.5.11
Revalidating the Pipe Piece
After changing the production information you can revalidate the pipepiece by clicking Revalidate Pipe Piece. This runs a production check on the
pipe-piece with the new values.
3.15.5.12
Finishing Viewing Results
To finish viewing the results of the production checks click Finish Viewing
Results to return to the top level of the form.
3.15.5.13
Viewing Production Information
You can view the production information assigned to pipe-pieces of a spool

without having to go through a production check.
To do this, click on View Production Information for either the pipe or a
spool. This displays a view of the production information assigned to each
pipe-piece in the same way as does clicking on Modify Production
Information from the production check results panel.
3.15.5.14
Removing Machine Information
To remove all machine information associated with a pipe spool or all the
spools on a pipe click Remove Machine Info for either the pipe or the
selected spool:
3.15.6 Automatic Flange Alignment

For pipe-pieces and pipe spools that have been set up to be machinewelded, the system ensures it correctly orientates the piping model so
flange-holes and spools align when assembled.
The system checks flange-alignment as part of the pipe-checking and
Datacon functionality.

User Bulletin
3-20
PDMS Design Changes
3.16 Laser model and its manipulation
*sp2*
These options are only useful when the new Laser Model Interface is
installed. Details are available in its documentation.
The links to this external geometry are stored in new database elements
XGEOM, XLCTN, XCELS.
This enables the point cloud model to be visualized, measured and clash
checked alongside the PDMS model.
3.17 Check Isometrics

Check Isometrics can now be produced from within Design and Spooler.
Extra syntax has been added to the command line:
Isodraftmode switches into the Isodraft syntax.
Exit returns the user to the Design/Spooler syntax.
The Utilities menu has been extended in the Design Pipework discipline.
(A similar capability has been added to the Spooler module). Selecting
Pipe Isometric or System Isometric at a Pipe, Branch, Spldrg, Spool
or Field element will display a preview isometric (processed using a
predetermined options file, which may be replaced by the user). There is
a button to display the process time messages.
Selecting Show Pipe System at a pipe or branch element will highlight
the connected system for that element in the 3D view.
A Windows printing mechanism is also provided: it is possible to print
or all sheets using . There are similar icons for
single sheets using
previewing single or multiple drawings and for saving them to file.

User Bulletin
3-21
PDMS Design Changes
3.18 Look Explicit
*sp3*
The Explicit view direction option has been reintroduced in Design, on

the Limits CE Options popup menu. The user can enter the required
angle for the view direction, for example looking along a structural
member.
The Look 3D View form has a popup menu for setting view direction;
this allows the user to use the orientation of picked graphical items to
populate the Direction field.

User Bulletin
3-22
Piping Isometric Enhancements

In addition to the new check isometric facility in DESIGN and
SPOOLER, a number of improvements have been made to the
ISODRAFT module, some involving data set up in other parts of PDMS.
They are listed here for convenience.
4.1

ISODRAFT has a new Office 2003 style GUI, based on Microsofts .NET.
This includes many new features such as window and toolbars docking,
tabbing etc. Please refer to section 2.2 Application framework for further
details.
4.2
Parameterised MTOL & MTOQ

It is now possible to parameterise MTOL & MTOQ for example, the
following is now possible:
MTOQ (PARA[3] + DESPAR[2] )
4.3
Use of temperature and pressure for selection

The temperature and pressure attributes from the owning branch can
now be used as Spec selectors for choosing bolting items in ISODRAFT.
Spec answers may use a specific value or give a range.
4.3.1 Standard Bolt Hole DB Change

The bolt set BTSE now has some of the same attributes as a BLTP:
BTHK, BDIA, BTYP
as well as a new attribute:
NOFF (number off), which is defined as for the SBOL element.
If these entries are set, the program automatically creates an array with
NOFF members which are the default bolts for this connection.

User Bulletin
4-1
This enables a drastic reduction in the amount of data that is required to

define bolt requirements. However, if the new attributes are not set, the
existing methods continue to work in exactly the same manner.
BLTPs should still be used as members of a BTSE for those numbers
where there is a deviation from the standard bolt as defined in the BTSE
or if the bolt hole numbering is non continuous. Note that Jacking bolts
must always be defined using BLTPs.
4.4
User-defined Material Lists

The restrictions on users defining their own material list format have
been eased. It is no longer necessary to be using the PARTNUMBERS
FROMDB option in order to do this. See MATERIALLIST command in
the VANTAGE PDMS ISODRAFT Reference Manual.
4.5
Spooler Pulled bend numbering
*sp1*
A new option has been added to the PARTNO command, for each of its
CREATE, CHECK and UPDATE <gid> options, e.g.
PARTNO CREATE <gid> PARTNO
This PBEND option (at the end of each command) will result in bends
having unique part numbers and will ensure implied tube either side of
the bend will have the same part number. Not all bends will be
numbered using this syntax; zero length bends will not be numbered.
4.6
Isodraft Pulled bend numbering
*sp1*
The syntax for PARTNO has been modified to include a new option for
pulled bends:
PBENDNUMBER ON PARTNO
This will use the part number rather than the bend number as the source
of the Bend number on the drawing and in the bend table if shown.
4.7
Weights on Isometrics
*sp4*
This new feature allows the user to add a weight column to the isometric
material list and provide a summary total for the fabrication and erection
material plus an overall total for isometric material weight.

User Bulletin
4-2
4.7.1 User Interface

The user interface provides the following new options:
4.7.1.1 WEIGHT on the Material List Column Definition
The Material List Column Definitions form displays the option
WEIGHT in the list of available Component attributes.
4.7.1.2 Total Weight Option
If, and only if, this option is selected, three checkboxes are displayed: TOTAL FABRICATION
TOTAL ERECTION
TOTAL COMBINED
4.7.1.3 Weight Conversion Factor

In addition, a Conversion Factor (pre-populated with a value of 1.0)
may be specified.
4.7.2 Command Syntax

This mechanism generates the following syntax in the Options file:
Column c OTHER Heading 'WEIGHT' WEIGHT with Width www [TOTAL
FABRICATION] [TOTAL ERECTION] [TOTAL COMBINED] Factor f
4.7.3 OUTPUT
For the total weights, a new text element is optionally placed below each
material column.
All of the above texts have been given a text number and added to the
alternative text list so that they may be modified to a different language.
If a component does not have a weight, a --- character string is output to
indicate that no weight can be found.
The weight column and extra weight text is output to the
MATLISTFILENAME file if selected.

User Bulletin
4-3
4.7.4 Example Material List

User Bulletin
4-4
4.8
Flow Arrow settings
*sp4*
Isodraft places flow arrows on the isometric with their direction governed
by the BRANCH attribute FLOWDirection. The function is controlled
using the FLOWARROWS command (please see ISODRAFT Reference
Guide). The arrows can be placed automatically or positioned using
ATTAchments with their ATTYpe attribute set to FLOW.
The settings for FLOWD are either BACK for flow from tail to head or
FORW for flow from head to tail.
Two new settings are now handled by Isodraft: OFF to allow the arrows
to be turned off or BOTH to indicate a two-way flow. Any other setting
will continue to be treated as forward.
Examples of 2-way flow arrows are shown below:
4.9
Isodraft SKEY Enhancements
*sp5*
4.9.1 New UNBW SKEY

A new SKEY UNBW (Butt Weld union) is now available. It has the same
GTYPE, Plotted Symbol and P-points as the existing Socket Weld and
Screwed Fitting Unions (UNSC and UNSW).

User Bulletin
4-5
4.9.2 New FY** SKEY

A new SKEY FY** (Y-type Filter/ Strainer with ** = BW, CP, SW, FL,
SC, PL) is now available.
P-points
Plotted
Symbol
This is in addition to the existing filter/strainer SKEYs FI**, FA**, FO**

and FR** with ** = BW, CP, SW, FL, SC, PL.
4.9.3 Tee/Olet SKEY Enhancement

Certain existing Tee/Olet SKEYS have been enhanced to allow the user
to indicate the presence of an offset P3.The P3 connection of the tee/olet
must be connected directly to a pipe/tube.
Affected SKEYs are HC**, TS**, Y1**, Y2**, Y3**
(with ** = BW, CP, SW, FL, SC, PL) and TPUL, TEBW, TESO, TERF,
TESW.
The default behaviour is that, if an offset P3 configuration is present, a
new ATEXT characterising the offset is output on the drawing. This new
ATEXT is number 233 in the list of ATEXTs and its default value is
BRANCH OFFSET BY followed by the nonzero relative coordinates of
the offset.

User Bulletin
4-6
4.10 Improved Continuation Sheet Options
*sp5*
4.10.1 New Annotation Options
4.10.1.1
Show Coordinates across Sheets.
An extra clause SHEET has been introduced to the COORDINATES

command to specify that spatial coordinates are to be shown at sheet
breaks on the same isometric: Coords ON AT Sheet
This may be accomplished automatically by a new checkbox Sheets

option on the Annotation Options form (highlighted above as 1).
Checking this box will display the appropriate coordinates.
4.10.1.2
Continuation Sheet Information at Sheet Breaks
A new CONTSHEETS command is introduced which takes effect when

one isometric drawing is located on several sheets. It allows the User to
specify that the sheet number of the continuation sheet be shown at the
sheet break when the connection goes from one sheet of a drawing to
another. This option may now be set using the new checkbox option on

User Bulletin
4-7
the Annotation Options form (highlighted above as 2). Clicking this

checkbox will toggle between:
CONTSHEETS ON
Continuation sheet numbers between sheets are switched on.

CONTSHEETS OFF
Continuation sheet numbers between sheets are suppressed.
This is not to be confused with the CONTNOTES command which

specifies continuation notes at the end points on drawings when the
connection goes to another isometric.
4.10.1.3
Additional Attributes Shown at Sheet Breaks
An extra clause, ContUdefText (continuation user-defined text), has been

introduced to the CONTSHEETS command to specify that further
pipeline attribute or user-defined attribute (UDA) information may be
shown as part of the continuation sheet information displayed at sheet
breaks. The format of the constructed text string is controlled by the
User and may contain arbitrary text and carriage returns:
CONTSHEETS ON ContUdefText
'LATTR1''arbtext1''LATTR2''arbtext2'''
where LATTR1 and LATTR2 are valid Pipeline attributes and arbtext1
and arbtext2 are two arbitrary text strings. The sheet number of the
continuation sheet is automatically appended to the user-specified string.
Therefore, the example specified above would output the string
XXXXarbtext1YYYYarbtext2n for continuation sheet n where XXXX is
the value of LATTR1 and YYYY is the value of LATTR2.
This may be accomplished automatically by a new text box on the
Annotation Options window (highlighted above as 3). In the text box the
User is able to add something like:LATRR1/LATTR2-
where LATRR1 and LATTR2 are valid Pipeline attributes
This will generate XXXX/YYYY-n for sheet n where XXXX is the value of
LATTR1 and YYYY is the value of LATTR2.
A more concrete example of the use of the CONTNOTES, ContUdefText
option (combined with the COORDINATES option) is as follows. The
specified options:
Coords ON AT Sheet
ContSheets ON ContUdefText '''Name=''NAME''
Type=''TYPE''&/Lock=''LOCK'' Owner=''OWNER''
PSPE=''PSPE'' pg'''

User Bulletin
4-8
will display at the sheet break of an isometric:

E 12250
N 13500
EL +2735
Name =100-C-10 Type=PIPE
Lock= Owner=PIPES PSPE=A3B pg3
The COORDINATES option specifies the output of the first three lines.
Note that the user-defined text occupies the last two lines because a
carriage return &/ is specified. The value of the Lock attribute is not
output because, in this case, it is invalid. The continuation sheet page 3
specified indicates that this text would be expected to be located on sheet
2 of an isometric at the sheet break continuing onto sheet 3.
Note that a valid non-null string specified by the ContUdefText option

will always be output at sheet breaks, irrespective of whether the
CONTSHEETS option, specifying whether the continuation sheet
number is displayed or not, is set to ON or OFF.
4.11 Placing of Dimension Labels
*sp5*
A new DIMLABELS command is introduced, which allows the User to

control the appearance of dimension labels displayed on isometrics. This
option may be set to either of the two options:
DIMLABELS IN
Dimension labels are shown within the dimension line (the default).
DIMLABELS ABOVE
Dimension labels are shown above the dimension line.

User Bulletin
4-9
This option may also be set by toggling between the two Dimension
Labels options (IN/ABOVE) on the Dimensioning Options form
(highlighted above). The effect of this option on the appearance of
dimension labels is indicated below:
ABOVE
IN
178
4.12 Improved Dimensioning Oriented Welds
*sp5*
A new option allows the user to control the dimensioning of components

on either side of a weld when the flow-through directions of these two
components are non-parallel. In earlier releases such configurations
could lead to inaccurate dimensions and skew/fall angles.
These non-parallel configurations may now be accommodated correctly
by using the WELDANGLES option. When this option is switched ON, it
is necessary for the user to also specify an angle as the minimum at
which the change of direction be considered significant. In other words,
for all angles greater than or equal to that specified, the new behaviour
for oriented welds occurs; otherwise, the old behaviour (equivalent to
WELDANGLES OFF), occurs.
This option may be set by using the new checkbox option on the
Dimensioning Options form. Checking or unchecking this box will toggle
between:
WELDANGLES ON
Oriented Welds option on.
WELDANGLES OFF
Oriented Welds option off.
When WELDANGLES ON is selected, the user may also specify the

minimum weld angle, WELDANGMIN, in the data entry box next to the
checkbox. The option WELDANGMIN takes the default value 0.10
degrees unless the user modifies it in the data entry box. Thus for the
case WELDANGLES ON, the Oriented Welds option is fully specified by,
for example,
WELDANGLES ON WELDANGMIN 0.08
The case WELDANGLES OFF is equivalent to the old behaviour and is

the default.

User Bulletin
4-10
Drawing Production Enhancements

For the PDMS Draft user, PDMS 11.6 provides access to a 3D colour
shaded graphical view for use in the definition of drawings. The user can
use it to define the contents of a drawing or to set the direction and limits
of a 2D view. This feature has been refined at PDMS 11.6.sp1.
For the PDMS Draft user, PDMS 11.6 provides access to a 3D colour
shaded graphical view for use in the definition of drawings. The user can
use it to define the contents of a drawing or to set the direction and limits
of a 2D view. This provides a highly intuitive and productive user
interface that will help to reduce drawing production times and enable
users to work in a familiar 3D environment. Users can create and
manipulate section planes in the 3D graphical view using direct
graphical interaction, and apply these section planes to any view on the
drawing. This displays in 3D the position of each part of the section plane
and is therefore simple to use, even for complex stepped section planes.
Further productivity improvement is achieved through the introduction
of a dockable database explorer and presentation of key annotation
features in a common application, removing the need for the user to
switch applications when adding basic annotation to drawings.
Isometric creation is typically performed as a batch job. However, for the
piping designer it is highly beneficial to produce a check isometric or
system isometric at various stages in the design process. PDMS 11.6 will
allow the piping designer to produce a standard isometric or system
isometric from within PDMS Design or PDMS Spooler, allowing the
designer to stay focussed on the piping design whilst generating
isometrics to assist in the design process. For further information, please
refer to the section on Design.
5.1

A new Office 2003 style GUI, based on Microsofts .NET, is now used in
Draft. This includes many new features such as window and toolbars
docking, tabbing etc. Please refer to section 2.2 Application framework
for further details.
In addition the Draft applications have been rationalised with the
various sub applications merged into a unified environment.

User Bulletin
5-1
5.1.1 Merged sub-applications

Dimensioning, Labels and 2D draughting applications have been merged
into one General application, so that all utilities are available to the user
without changing application or swapping menus.
DRAFT applications maintain the layer options (on the main window) to
enable the creation, in the appropriate place, of any 2D element,
dimension or label.
The Main Draft Menu has changed to remove the working sheet selection
and add a new members list explorer, with a mouse shortcut menu to add
a sheet to the 2D. The Dimensioning, Labelling and 2d draughting
applications have been removed, as they are now all merged into the
general application.
The Utilities from the 2D Draughting menu have been added to the
General Utilities menu, which is similar to the application utilities in
DESIGN.
Changes have been made to the Create and Modify menus as part of
merging the applications, with all the 2D draughting menus added to the
main menu.
5.1.1.1 Layers
The user can select a layer, but the application will select an appropriate
one, if required, before creating any element.
The layer gadget new has ALL the layers pertaining to the current sheet
listed, and this gadget can be filtered by using the new gadget Filter, to
list only those of the application the user is working on.
If the user changing from Dimensioning to Labelling, the application will
switch the layer gadget to list labels and select the first label type layer.
The user can re-select a different layer if required. The Layer gadget will
always change within the currently selected view, so if the user creates a
dimension in view 1 and then creates a label, the layer will switch to a
labelling layer in view 1.
Navigation around the DRAFT db automatically exchanges the layer
selection if a different view is selected. Clicking on a view has the same
effect as navigation to it.
Navigation to a dimension automatically changes the layer to a
dimension layer and highlights the view to which the dimension belongs.
This makes it easier to know where you are on the drawing and where
you are likely to create the next element.

User Bulletin
5-2
5.1.1.2 Database Hierarchy

Sheets may now be added to or removed from the 2D window from the
Explorer. This means it is necessary to check the position in the
hierarchy before adding something to the 2D window.
If the user is too high, i.e. above drawing level, then an error informs the
user that the REGI/DEPT is not a valid working sheet. However, if the
user is at drawing level, ALL the sheets are now added, even if there is
more than one. A message is displayed to inform the user that there are
several sheets, so they should check that they require them all to be
added.
5.1.2 User utility menu

A User application utility menu is now available in DRAFT, under the
general application. This utility allows the user to create menus for his
own use. The functionality is similar to that in DESIGN.
5.1.3 Dimension and 2D drawing forms

These forms have been changed so that dimensioning and 2D draughting
can be called from either form or toolbar. Some of the dimensioning
functionality has been moved from the utility menu and put under the
modify menu, to make it easier to find.
5.1.4 Labelling rationalisation

Labels have been rationalised and made dockable wherever possible.
This affects the Autotagging, Labelling and Gaps forms.
The autotagging form has been redesigned in order to reduce its size and
make it dockable. The regenerate tag button has been removed and
replaced with a toggle, so that the update button is the only button used
to execute the form. Checking the regenerate toggle and pressing update
regenerates the tags.
The labelling forms for SLAB (symbolic labels) and GLAB (General
Labels) have been combined and redesigned to be dockable, so that they
can be displayed all the time without obscuring the users view of the 2D
drawing canvas.
The main menu has been rationalised to show the new form, with the
modify menu reduced and some of the attribute settings removed, as they
are all covered in the new form.

User Bulletin
5-3
5.2
Use of the 3D features in DRAFT
(update) *sp1*
A 3D volume view is now available in DRAFT: it has similar properties to

that in Design. This can be used to explore the 3D model and identify
objects for drawing production.
There are also 2 database browsers: for Draft and Design databases. The
Design browser has a mouse shortcut menu option to add elements to the
3D view. You can also Drag-and-drop from the Design browser to the 3d
view.
Various improvements have been made to the usability of the 3D View at
sp1, notably to the behaviour of the view frame and section plane
features.
5.2.1 3D Commands
DESADD & DESREM commands allow the Addition and Removal of
Design elements to a 3D view gadget. These are similar to the ADD &
REM commands in Design. The GENERATE MODEL command allows
capture of a 2D view content and colour for addition to the 3D view.
The GENERATE MODEL command allows capture of a 2D view content
and colour for addition to the 3D view.
A new IDLIST object is now available to transfer the 3D contents to the
2D IDLIST (ADDE and REME elements).
A new SELECTION object provides a graphical aid of a 3D selection box.
This is called using the mouse secondary button in the 3D view.
A new VIEWFINDER object provides a graphical aid that represents the
2D view position, size and direction in the 3D view to allow interactive
positioning of the 2D view through point and view direction.
5.2.2 3D user interface

The new 3D view is similar to the 3D views in Design and may be
initiated from these menus: 3D View... from the shortcut menu for the 2D
view or Display > 3D View from the main menu.

User Bulletin
5-4
Associated
View
5.2.3 Managing 3D view content (Drawlist)

(ToolTip 'Add to View') adds elements to the 2D Idlist and the 3D
view. The Draft idlist ADDE elements are created at this time. This is
done to help workflow so the user does not have to do an UPDATE
DESIGN at this time. Updates could be done at anytime, even as a
background process or overnight job. The element added to the idlist will
generally be the current element, unless there is a multi selection active,
when the selection will be added. Elements added to the ID List will be
displayed in colour specified in the view representation rules.
(Tooltip Remove from View) removes elements from the 2D Idlist and
the 3D view. The Draft idlist REME elements are created at this time
The element removed from the idlist will generally be the current
element, unless there is a multi selection active, when the selection will
be removed.
(Tooltip Show View Content...' ) Show a form displaying the 2d view
Idlist (An UPDATE DESIGN may or not have been performed on this) .
This button is a toggle button to show or hide the ID List Contents form.

User Bulletin
5-5
This toggle gadget on the form, when ticked, means that the Idlist will be
amended appropriately when an element is added to (or removed from)
the 3D view directly from the Design Explorer. This is seen in the 3D
view in the correct representation colour.
If the gadget is unticked, this means that the element is added to the 3D
view only and the 2D Idlist is unchanged. Such items are added to the 3D
view in grey colour.
Therefore the significance of coloured items in the 3D view is that these
items have been added to the idlist. Grey items in the 3D view indicates
these items are in the 3D view but are not in the 2d idlist so even an
Update Design will not recognise these elements.
5.2.4 Multi Selection

The + and buttons will add or remove the current element unless a
Multi-selection has been made using the CTRL+pick or by dragging out a
frame.
A primary mouse button drag on the 3D view gadget will initiate a
selection box as shown below. This allows the user to multi pick elements
within or partially within a volume. The box can be resized by movement
arrows indicated on each side of the box. The box can also be used as a
clip box. Two separate examples are captured below.

User Bulletin
5-6
The following menu is presented when doing a secondary mouse button

drag:-
When the box is displayed it appears as above. The box can be resized by
dragging the arrows.
Picking the arrows on the displayed selection box with a mouse click the
following menu is shown.

User Bulletin
5-7
The background also has the following menu addition
Clipping Planes On This clips the graphics to the content of the

selection box.
5.2.5 Scale control

The view scale can be specified using direct input or form. Any change of
scale will be reflected in the 2D and 3D immediately.
The Scale gadget displays a standard scale dialog to maintain a
consistent feel in Draft.
5.2.6 UNDO/REDO
Database marks have been included:
1. When an element is added to the View The View Content form will
be updated.
2. When an element is removed from the View The View Content form
will be updated.
5.2.7 Modify Star

When the 3D View form initiates any database change such as:
Change in scale; Add to View; Remove from View; Move viewfinder,
(which modifies view through position)
the form title changes from 3D View to 3D View*
The * indicates that an Update Design is required using the
Once the Update Design is done the * indicator is removed.
button.
5.2.8 3D to 2D (Update Design)

(Tooltip 'Update 2D View from 3D view (i.e Update Design)')
The Elements displayed in the 3D view that are in the IDlist can be
transferred to a 2D view by simply pressing this button. At this time the
user may be asked if he wishes to do an Update Design and warned that
this can take a while. An Update can be done at this time or later by
using the Background Process Manager.

User Bulletin
5-8
5.2.9 2D to 3D
(Tooltip Update 3D View from 2D View)
The contents of the current 2D view can be displayed in the 3D view by
pressing this button. The associated view name is displayed next to this
gadget.
(Tooltip Pick 2D View to associate to the 3D View)
This button can be used to retain the current 3D view contents, to be
associate it to a different 2D view. The user is asked to identify a 2d
view. This is useful when different views of similar content are required
(e.g. Plan and Elevations)
5.2.10 Display of 2D view frame in the 3D view gadget
Figure 1
Figure 2
The limits of the associated 2D view are represented in the 3D view

using the VIEWFINDER. This is shown in the above snap shot by the
purple rectangle. The colour is, by default, the same as the highlight
colour of the 2d view but can be changed. The view finder is a core
object that can be:
1. Graphically dragged to reposition the view through point.
2. Graphically rotated using the corner blobs.
3. Graphically resized using the arrows shown in the Figure 2.
In each case the 2D database is changed. Note that a view can be
inverted or turned through 90 degrees by using the popup Rotate
Frame> options.
Similarly to switch between the Normal mode shown in Figure 1 and the
Resize mode shown in Figure 2 use the popup Resize Frame toggle.
User Bulletin
5-9
5.2.11 Update control

It is PDMS User interface philosophy not to have hidden UPDATE
DESIGN operations. It is usually exposed so the user is aware that this
is going to happen, because this can take some time to update. Therefore
we have continued to separate this operation.
The Update Gadget has 3 options:
On Demand meaning UPDATE DESIGN when the 3D to 2D button is
pressed.
Background meaning UPDATE DESIGN as On Demand, by using the

Background Process Utility .
Auto Update meaning UPDATE DESIGN dynamically when the 2D
view changes (i.e. View Content, Scale, Direction, View Type, etc)
5.2.12 View Type
In the frame for update there is an option gadget to specify the type of
view to be generated in the 2D. The options in the gadget are the full
PDMS list of view types, ranging from Universal Hidden Line to
Wireline. Selecting one of these will change the database. Note that
section planes do not clip in wireline views.
5.2.13 Section Planes

(Tooltip 'Show Section Planes')
This toggle button activates the section planes and displays the Section
Planes form. Note that section planes can be individually hidden or
shown, so check settings on form..
(Tooltip Indicate Section Plane clipping')
This toggle indicates the clipping side of the section plane by graphically
displaying a series of perpendicular lines behind the section plane.
5.2.14 Representation in 3D view

It is possible to change the 3D representation, such as holes on/off, for 3D
elements as in Design.

User Bulletin
5-10
5.2.15 Viewfinder Shortcut menu.

Align Frame with 3D View Used to modify the view direction. Adjust
the 3d view to the desired view direction then use this option; and the
view finder will snap to this new direction.
Update Frame from 2D View If the view has been changed using 2D
appware the 3D could be out of date. Use this option to update the 3d
view.
Center Frame Centres the frame in the centre of the view gadget.
Rotate Frame > Options for Up, Down, Left, Right which allow the view
to be instantly inverted or turned through 90degrees.
Resize Frame (Toggle) Changes the mode of the View Finder so that is
can be resized. (See the above section Display of the 2D View in the 3D
View gadget )
Lock Frame This is a toggle that locks or unlocks the frame to prevent
accidental movement of the view frame. There is always an undo option
but the user may not be aware he has moved the frame.
Hide Frame Hides the frame by making it invisible. To reshow the

frame there is a Show Frame option on the view background menu.
Auto Update If this toggle is on then each time the frame is moved, an
Update Design is done. This should be used sensibly depending on view
content because large data will take a long time to process.
Frame Colour > White, Orange, Blue, Green, Magenta, Cyan, Yellow
Changes the frame colour to the selected colour toggle. The current
colour will be ticked.
Translucent Frame Gives the frame a background translucency or no

background. A translucent frame is easier to pick but can partially
obscure some of the content.
5.2.16 3D view Shortcut menu additions related to view finder.

Look >Through View Finder This is a quick way to change the 3d view
direction to look squarely through the view finder.
View Finder>Show Frame Reshows the view finder frame (The hide
option is on the view finder menu itself)
Highlight Frame Highlights the view finder frame by flashing it.
Similar to the Highlight CE in 2D view.
Center Frame Centres the frame in the centre of the view gadget.

User Bulletin
5-11
5.3
Template drawings
Create>New Drawing from Template utility.
Key Features:
5.4
The utility does not require the input of a name for the new drawing.
If the user is not at the correct hierarchal position, the system will
attempt to navigate to an appropriate place to create a drawing, and
ask the user to confirm if necessary.
Templates made from DRWG or DRTMPL are valid.
The Selection of the Template is more visual.
Once the drawing has been created, the user can then utilise the 3D
view to define the view contents. See below.
New Drawing creation and New Drawing Sheet creation are

allowed.
Default names or user names are allowed.
Section planes
The User can now create, edit and view section planes in a 3D model
window from within Draft, before adding these to a drawing view. This
makes it easier for the user to work with section planes, but does not
affect the existing working methods. It does improve the presentation of
section plane information and their effect on the drawing.
The Section Planes window is initiated from the 3D View window. It
enables the creation and editing of section planes, both simple and
stepped, and their associated clipping lists.
5.4.1 Improvements for *sp3*

Several improvements have been made to the operation of section planes,
including:
Planes are now shown on the 2D view at same time as on the 3D view.
There is now a new menu option (keyboard shortcut C) to cause an

extra step to close the stepped plane profile.
The axes and the drag plane can now be used to align the section
plane to a feature.

User Bulletin
5-12
5.5
The Modify Section form now updates the 3D view when Apply is
pressed. For example, if the plane is flipped, this is now shown in the
3D view.
Background processes
Certain PDMS commands may take a long time to complete. PDMS 11.6
introduces a background process manager (BPM) for managing the
UPDATE DESIGN command. This technology may be extended to other
processes in future releases of PDMS.
When the background process is updating a particular view, it is possible
for the user to edit another view on the same sheet. That is, there is no
contention between the foreground and background processes.
The BPM does NOT need to be active at the same time as the main
PDMS session. For example, the user can submit any number of
UPDATE DESIGN jobs and then exit before the BPM is started. The two
processes are completely independent so that the BPM can run
overnight, for example. However, once a BPM job has completed a
PDMS session must of course be started to refresh the updated element.
Picture files are not updated directly by the BPM.
5.6
AutoCAD integration with Final Designer

PDMS 11.6 will bring a new option for the final production of AutoCAD
drawings: first release is expected with the next service pack of PDMS
11.6. The new Final Designer product enables users to export their Draft
drawing sheets to AutoCAD with links to the Draft database maintained.
It is anticipated that users will continue to develop drawing sheets in
PDMS Draft and make use of the automation features: when a drawing
sheet is ready for final design it will be exported to AutoCAD.
An exported drawing sheet can be accessed through PDMS Draft by
navigating to the sheet and opening it. The sheet is displayed in an
AutoCAD session for viewing or further editing. Within AutoCAD, users
can add dimensions, labels, intelligent text and 2D primitives. Where
applicable, annotation can be attached to P-points or P-lines enabling the
annotation to be updated when the design graphics change.
If Design graphics change, they can be updated in the same way as
standard Draft views: the changes are shown on the AutoCAD sheet.
Creation, deletion and modification of annotation in AutoCAD are
communicated to PDMS Draft so that the database links are maintained,
however, full details of the definition are not communicated. This means

User Bulletin
5-13
that, for annotation created or modified in AutoCAD, the AutoCAD sheet

stores the up-to-date definition.
Automation features in PDMS Draft should continue to work on
AutoCAD sheets with the exception of any commands that require
interaction with the Draft picture file such as ID commands.
5.7
UNDO/REDO
*sp1*
This is now available in DRAFT.
5.8
Pipe Sketch ADP
*sp4*
Automatic Drawing Production (ADP) has a new option to produce pipe

sketches automatically using production-checked pipe-spool data from
the Design application. The sketches include dimensioned scale drawings
of a pipe spool along with tables of relevant manufacturing data.
Pipe Sketch drawings are based on a Template Drawing, which contains
views and layers like any other Draft Template; for other Drawing
information the Template Drawing references a Backing Sheet. Users
will generally have their own Sketch Templates for Pipe Sketches.
5.8.1 Producing Pipe Sketches

To produce pipe sketches, you have first to navigate to a suitable level in
the design hierarchy and get a list of the spools for that level. Pipe
Sketches are produced using a form, which is invoked from the main
menu by choosing the Create> Pipe Sketches option.
The first time this is displayed, there will be a default AVEVA Template
in the Template field and a default log file name in the log file field.
When the form is applied the current settings of the Registry, Template
and Log File are written to a defaults file for use the next time the form
is displayed: this file is %pdmsuser%/PipeSketches.pmldat.
5.8.2 How to Use the Pipe Sketches Form

The form allows you to filter by name then select from the list of pipespools for which you want to create sketches. After you have identified
the template to use for the sketches and a place in the Draft database to
store the generated sketches you can generate the sketches.

User Bulletin
5-14
5.8.2.1
Design Element to Search Under

This is the name of the root design element,
which must be either a Zone or a Pipe.
You can populate the field using the CE
button or by typing in the name. The system
validates all typed input.
If you use the CE button, the text box
displays the name and the form initialises.
5.8.2.2
Filter the spools using

This lets you filter the pipe spools under the
root element according to various criteria.
When youve selected the criteria, click the
Search button to execute them.
All or part of the spool name includes spools
with names matching the text you enter,
either wholly or partially.
Production Status offers three options in a
drop-down list:
All: Matches all spools, both validated
and not validated.
Valid: Matches only spools valid for
production.
Not Valid: Matches only spools not
valid for production.
Sketch Status Filter offers three options in a
drop-down list:
All: Matches all spools, with and
without pipe sketches.
Created: Matches only spools with pipe sketches.
Not Created: Matches only spools without pipe sketches.
5.8.2.3 Search Results

This list is a collection of all the pipe spool elements of the of the root element, filtered
by the criteria above. The system processes only pipe spools selected in this list when
you click Create Sketches.
The results should be self-explanatory; however, the list also has a pop-up menu,
accessed by clicking the secondary mouse button anywhere in the list area:
The

User Bulletin
effect of these Menu options is:
5-15
Select All: Selects all pipe spools in the list.

Clear Selection: Unselects all pipe spools in the list.
Print Sketch: Print the selected sketch.
Delete Sketch: Delete the selected sketch.
5.8.2.4 Display Button and Arrow Controls

Click on Display to add a sketch of the selected pipe spools to the working list of sheets
for display, although you can display only one sheet at a time. To navigate up and down
the list, use the up- and down-arrow icons.
5.8.2.5 Sketch Creation Options

These options are at the bottom of the form:
Sketch Template This must be an existing DRWG element that can be used as a
template for the pipe sketch drawings.
CE button This top CE button (denoted DRWG) allows for quick capture of the
current drawing.
Create Sketches in Registry The named element must be an existing REGIstry
element into which the system puts all new pipe sketch drawings.
CE button This bottom CE button (denoted REGI) allows for quick capture of
the current registry.
Log File The system records progress of the creation process as text that can be
written to file. This field shows the file name the system will write to. The system
overwrites this file if it already exists.
Browse button Invokes a standard browse form to let you select a log file.
5.8.2.6 Create Sketches

The Create Sketches button sets the process in action.
A message should appear in the status bar to record progress, e.g. Generate Pipe
Sketch n of N.
When the system has created the pipe sketches it adds them to the Draft Explorer.

User Bulletin
5-16
5.8.3 Pipe Sketch Administration

The system creates pipe sketches on templates and backing sheets you
can define yourself using the powerful facilities of the PipeSketch object.
5.8.3.1 Backing Sheet
The Pipe Sketch references the Backing Sheet, which is generally userdefined. It is a standard backing sheet containing the drawing title block,
with drawing data displayed via intelligent text,
e.g. #DATE<FR DRWG> and #:UDA_Name etc.
In addition to the standard title block, the backing sheet is used to
identify and locate TABLES that are used on the Pipe Sketch.
These tables are identified by:
MaterialTakeOff
function MTO
SpPurpose TABLE or SpPurpose CELLS
Bending Table
function BENDING
Bending Activities
function BENDINGA
Welding
function WELDING
Assembly
function ASSEMBLY
End Points
function ENDPOINT
5.8.3.2 Tables
In database terms the Table is a NOTE of the Backing Sheet (BACK).
There are two notes required, one for the Table headings and one for the
Table cells. Both notes are positioned at the same point. For example:
BACK named /DRA/MAS/BACKS/PipeSketch/A4 SETST
NOTE named */ExampleTable function ENDPOINT SpPurpose TABLE
NOTE named */ExampleCells function ENDPOINT SpPurpose CELLS
The example below is a table defined on a backing sheet. Although this

table is visible in the view, it will in practice have its visibility flag
(LVIS) set to false. The reason is that this table is copied onto the Pipe
Sketch Drawing then the cells of the table are populated with data from
the actual Pipe Spool.

User Bulletin
5-17
XYPOS of the
Tables (NOTE)
The figure below shows the table in situ on the final pipe Sketch Drawing.
5.8.3.3 MTO Tables

The figure shows the MTO/Material Take-off tables on the backing sheet. On this type
of table the cells data need to be attributes of the Pipe Spool elements, e.g. DTXR and
MTXR attributes as used in the Description and Material columns.
5.8.3.4 Other Tables

Bending, Bending Activities, Automatic Welding, Assembly Activities
and End Points tables are similar.

User Bulletin
5-18
5.8.4 Styles
All Drawing Styles and Representations are inherited from the template
drawing. These include the View Representations, text colours and font
size for Labels and Dimensions.
5.8.5 Common Object

The system uses one pipeSketches object that does all the work to
produce Pipe Sketch Drawings. This is so you do not have to use the form
and graphics mode to produce a batch of drawings.
The common object is a global instance of an object called !!pipeSketch.
5.8.5.1 Key Members:
Member
Type
Comment
!!pipeSketch.createIn
DBREF
Must be an existing Registry

REGI element
!!pipeSketch.selectedTemplate
DBREF
Must be an existing Drawing

DRWG element
!!pipeSketch.pipeSpool
DBREF
Must the an existing Pipe Spool

PSPOOL element
Member
Type
Comment
!!pipeSketch.logFile
FILE
The Form or User must write and

read this file
!!pipeSketch..drawingPrefix
STRING
Default is DR
!!pipeSketch..sheetPrefix
STRING
Default is S
5.8.5.2 Optional members
5.8.5.3 Other Members set and used in the background by the system:
Member
Type
Comment
!!pipeSketch..type
STRING
Will always be drawing or drtmpl
!!pipeSketch..pipePieces
ARRAY
System records the Pipe Pieces of

the Pipe Spool
!!pipeSketch..drawing
DBREF
System records the new drawing
!!pipeSketch..sheet
DBREF
System records the new sheet
!!pipeSketch..backingSheet
DBREF
System records the backing sheet

being used

User Bulletin
5-19
!!pipeSketch..mtoHeadings
ARRAY
Array of strings read from backing

sheet MTO table
!!pipeSketch..logData
ARRAY
Array of comment strings that user

or form can read)
5.8.6 Log Messages

To write any message to the Log Data from any PML function use:
!!pipeSketchesLog(Text of your choice)
To clear the messages from the Log Data use:

!!pipeSketch.emptyLogData()
To write to the log file use:

!!pipeSketch.logFile = object FILE(%PDMSUSER%/pipeSketches.txt)
!!pipeSketch.openLogFile()
!!pipeSketch.writeLogFile() write the contents of .logData to the .logFile
!!pipeSketch.closeLogFile()
5.8.7 Table Definition Example

Under a Backing Sheet:
BACK /ExampleBack SETST
Create NOTEs
NEW NOTE */---Table SETST
FUNC --- (--- can be MTO, BENDING, BENDINGA, WELDING, ENDPOINT or ASSEMBLY)
SpPurpose TABLE
Set the XYpos and usual attributes for text size colour etc. Create and
name TEXP and STRA elements under the note. In the example below
there are 4 TEXP elements and 7 STRA elements (Shown in Black)
NEW NOTE */---Cells SETST
FUNC --- (--- can be MTO, BENDING, BENDINGA, WELDING, ENDPOINT or ASSEMBLY)
SpPurpose TABLE
Set the XYpos and usual attributes for text size colour etc. Create and
name TEXP and STRA elements under the note. In the example there
are 3 TEXP and 1 STRA elements (Shown in red):

User Bulletin
5-20
NB. The */ColumnLine1 direction of From Point and To Point defines the direction of the rows.
5.8.8 Dimensions
Dimensioning is controlled from the Template Drawing:
A VIEW will be dimensioned only if it has a LAYER with a PURPose of
DIMA. If this layer exists, the dimensions go into that layer. The style of
the dimension will be cascaded from the owning layer.
5.8.9 Tags
Tagging is controlled from the Template Drawing:
A VIEW will be tagged only if it has a LAYER with a PURPose of LABA.
If this layer exists, the tags will go into that layer. The style of the tag
will be cascaded from the owning layer, or taken from a symbol template
in the case of component tags.
A typical symbol may look like this:

User Bulletin
5-21
To control how the components of the Pipe Spool are tagged.
Firstly:
A LAYER with PURPose of LABA must own a TASK element with a
SpPurpose of TAGDEF which owns 4 Task Parameter elements
(TKPARA) with FUNCtion equal to TEMPLATE, OFFSET, TPEN and
FPEN and suitable TPVALUEs.
For example:
LAYER
TASK
TKPARA
FUNC TEMPLATE TKPARA /MySymbol
TKPARA
FUNC OFFSET TKPARA 10 10
TKPARA
FUNC TPEN TKPARA 1
TKPARA
FUNC FPEN TKPARA 11
When tagging views, the system will create a Symbolic Label (SLAB) for
each component, using the attributes of the above task parameters.
Secondly:
A LAYER with PURPose of LABA must own a TASK element with a
SpPurpose of 'ARRLAB' which owns 6 Task Parameter elements
(TKPARA) and specific FUNCtions and suitable TPVALUEs.
For example
LAYER
TASK
TKPARA
FUNC Top Side TKPARA On
TKPARA
FUNC Bottom Side TKPARA Off
TKPARA
FUNC Left Side TKPARA On
TKPARA
FUNC Right Side TKPARA On
TKPARA
FUNC Margin TKPARA 5
TKPARA
FUNC Minimum Gap TKPARA 1
When tagging views the system will arrange the Label around the view,
using the attributes of the above task parameters.

User Bulletin
5-22
Parameterised Property Attributes
6.1
Introduction
*sp4*
Weight and Centre of Gravity calculations use CWEI & UWEI attributes
in the Property Database. Until PDMS 11.6.SP4, these attributes were of
type literal; they have now been extended to allow the use of Design
Parameters. This should be especially useful for highly parameterised
catalogues, such as those used typically for HVAC & Pipe Supports.
6.2
Property attributes affected
*sp4*
The following Property attributes can now be parameterised:

For CMPD & TUBD elements:
CWEI, CIWE, UWEI, UIWE, ACBO, BTOL, WTOL, WDIA, SHAP,
PRFC, CORA, EFAC, PWAS, BFLE & OUTD
These can be set with standard expression syntax such as:
Cweight ( ATTRIB PARA[2 ] + ATTRIB PARA[3 ] )
Outdiameter ( ATTRIB PARA[1 ] + ATTRIB DESP[1 ] )
Existing syntax is still valid, for example:

UWEI 2.5
The following pseudo attributes have been updated to use the

parameterised properties:
BRWEIG
BRANCH WEIGHT
BRIWEI
BRANCH INSULATED WEIGHT
BRWWEI
BRANCH WET WEIGHT
BRWIWE
BRANCH WET INSULATED WEIGHT
BRIARE
BRANCH INTERNAL SURFACE AREA
BREARE
BRANCH EXTERNAL SURFACE AREA
WALLTH
TUBE WALL THICKNESS
A new pseudo attribute, PROPRE, has been added to allow the querying
of the calculated result of the property attribute. This is a valid at the
User Bulletin
6-1
Parameterised Property Attributes
design element which indirectly references the property component such

as a branch or hanger member. It has a qualifier of the property attribute
to be evaluated and can be queried using the syntax:
Q PROPRE OUTD
6.3
Upgrade Requirement
*sp4*
Warning: Users DARS and PML applications will need upgrading if

parameterised properties are used.
Prior to SP4, a DARs program had to navigate to the relevant CMPD or
TUBD element and then query the real attribute, in order to obtain a
property for a piping component or similar. DARS has been updated so
that this still works for either existing data or for simple expressions;
however, it will give the wrong answer if more complex expressions are
used.
The type of expression that will not work is one which uses PARA or
DESP while a simple expression is similar to (33.5 * 8.6)
To upgrade any such DARs applications, use the pseudo attribute
PROPRE of the Design element, with the qualifier of the property
required.

User Bulletin
6-2
Admin enhancements for Global
7.1
Querying Remote databases
*sp4*
The Remote File Details and Remote Last Session form can be invoked in
two ways:
Either
Or
From Admin Main Query menu bar:
Popup menu in Admin Element form:
Query>Project>Remote Filedetails
Remote Last Session
Query>Remote Filedetails
Remote Last Session
Figure 1
Figure 2
Selecting the Remote Filedetails option displays the form below.

The main function of this form is to get the file details of one or more
databases for the current or any other location.

User Bulletin
7-1
Selecting the Remote Last Session option displays a similar form with
results relevant to the last session:
In both forms, the Location option lists all the online (not offline)
locations. On selecting a location, all the databases of that location will
be listed. If the Daemon of the selected location is not working, the Apply
button is de-activated and the status of daemon will appear adjacent to
the button. While the system establishes connection with the Daemon of
the selected location, the status file informs the user. Select one or more
databases from the list and press the Apply button. Now the resulting
file detail or session detail of the selected database(s) is listed on the
right of the form, along with the database name see below.
User Bulletin
7-2
Results can be stored by entering a file name and pressing the Report
button.
Sort by and Filter gadgets work in a similar manner to those in the

admin forms.
If the daemon is not in contact for the selected location, the Apply
button is de-activated and an error shown adjacent to it, as shown below.
The Test Communication button is an additional utility to check the
Communication status of the daemon, so that the user can check it before
selecting the Location. This shows the Test Project Communication form.

User Bulletin
7-3
7.2
Purge Transaction commands
*sp4*
A facility for purging transactions is now available from the Command

Transactions Form.
This will display the Command transactions form:
Selecting the Purge/Merge transactions DB tab will show:
The Left hand side only of the Form gets changed.

User Bulletin
7-4
Transactions may be purged based on the result and/or age of the

transaction.
The option Older than is provided to enter the age of transactions that
will be included for purging: this should be in the range of 1 to 365 days.
The Purge Transactions DB button will action the Purge, once the
appropriate details have been selected.
The options ALL / SUCCESS / FAILURE are available for the Purge
option. Selecting ALL will delete all transactions which are not in
progress and older than the specified age. Selecting SUCCESS or
FAILURE will purges only Passed or Failed commands as appropriate.
Redundant owning elements will also be deleted.
Merge Transaction DB will merge the transaction DB of the current
location. This will have no effect unless the database has been purged or
commands have been deleted interactively.
The Command transactions form is available in other modules, but does
not have the Purge transactions frame.
7.3
User Interface enhancements
*sp5*
For full details, please refer to the AVEVA Global 2.5 User Bulletin.
7.3.1 Admin elements Form
On the Database drop-down: Display the Primary Location
Sort on Location
Filter Primary and Secondary Databases
View Data for read-only Satellites
7.3.2 DB Allocation (By Location/By Database) Forms
Filter on Primary/Secondary locations
7.3.3 Create DB Form
Display underlying database type
Widen Description Textbox

User Bulletin
7-5
7.3.4 Create Location Form
Display available Parents/Groups/Administrating Locations

on the same form
7.3.5 Extract Control Form
PING button to check Global Communications
Feedback on action button to indicate a command has been

received
7.3.6 Main Tool bar
Lock/Isolate radio gadget removed from the Main Tool Bar

now available under Remote Menu Status of Lock/Isolate is
still indicated on the Tool Bar
7.3.7 DICE Form
Filter on Primary/Secondary Locations
Display more Databases
7.3.8 Transaction Command Timings Form
Default Settings should be more efficient
7.3.9 Create MDB Form
Display Primary Location of the Database
Feedback when Data has been modified
Enhance the Filter on the DB List
View more Databases within the lists

User Bulletin
7-6
Customisation
8.1
Application switching
The application switching mechanism in Design, Draft and Paragon has
been changed to remove the need to swap the main form when changing
application and to make it easier for the user to make additions to the
appware. An object provides more control over the display of forms in
different applications.
PML add-ins are available in PDMS 11.6.
An add-in can:
appear as an application on the main PDMS menu bar;
define menus and toolbars;
add menu fields and toolbars to applications;
remove menu fields from applications;
cause functions to be run when starting or switching between

applications.
Each existing application is implemented as a PML add-in. It is

important to make a distinction between an add-in that defines an
application and other add-ins. An application appears on the
Applications menu and can be switched to, whereas an add-in simply
provides a means of adding functionality to the module.
Information on how a user may upgrade existing applications and define
PML add-ins and control form display/reloading can be found in the
PDMS Software Customisation Guide Chapter 24 PML Add-ins.
8.2
Forms & Menus (PML) Enhancements

An improved Gadget Set for PDMS 11.6 provides:
Docking forms in the PDMS Application Framework

Definition of intelligent resizable forms
Toolbar definition in the PDMS Application Framework
Tabbed multi-page form definition
User-defined menu field names
Menu and menu bar editing enhancements

User Bulletin
8-1
Customisation
Other miscellaneous enhancements.

1. DIALOG forms are floating by default, but may be declared docking.
Docking dialogs are necessarily resizable and can be docked to an edge
of the PDMS Application Framework. Docked dialogs can be specified
as docked, or can appear floating and then be docked interactively.
2. DOCUMENT forms are MDI children by default, and as such will be
constrained within the PDMS Application Framework MDI client
frame. However they may be interactively floated outside the MDI so
that they can be dragged off onto the second screen of a twin screen
installation. Similarly a floating dialog can be interactively unfloated,
i.e. once again constrained within the MDI frame.
3. The layout of resizable forms has been improved by exposing
WinForms properties Dock and Anchor on most F&M gadgets. In
particular, a frame gadget itself has Dock and Anchor properties, and
may own other frame gadgets. The gadget Dock and Anchor attributes
permit the definition of intelligent position and resize behaviour when
its container gadget resizes. The net effect is to allow multiple
resizable gadgets on a form and predictable and potentially complex
resize behaviour. Existing resize behaviour has been maintained.
4. The Frame gadget is now a genuine container for all gadgets defined
within its scope. This permits easy management of properties such as
visibility for all its children. It also supports various frame types,
which allow the definition of toolbars in Main forms and Tabbed Pages
within Dialogs and Documents.
5. Menu field names and Menu and Menu bar enhancements are
supported as a basis for menu editing for sub-applications and Add-ins.
to support PML defined main menus for Add-ins

to support PDMS core-code to take over main menus
to support enhanced menu editing
to support enhanced Bar-menu editing
5. Miscellaneous enhancements
Every gadget has a VISIBLE property, which can be queried and
set via PML.
Graphical view gadgets now have BACKGROUND and
HIGHLIGHT methods to query the view background and
highlight colours as colour-name strings.
Previously only pix-mapped buttons supported toggle behaviour,
i.e. on/off state with visual differentiation: this has been
extended to allow toggle button behaviour for all buttons.

User Bulletin
8-2
Customisation
8.3
Further PML (Forms & Menus) changes
*sp1*
Further improvements to PML forms & menus capability for this service
pack are noted here: full details are given in the two PDMS Software
Customisation Manuals, which have been updated and expanded.
8.3.1 Gadget layout management

It is difficult to predict the extent of gadgets which have a displayed Tag
attribute, because the size depends on the particular tag string. This is
made worse for gadgets whose content is also defined by a string (or
strings) rather than by an explicit width and height specification, e.g.
TEXT, OPTION, RGROUP. Determining the width as the number of
characters in a string multiplied by the grid size (notional character size
for the font) is not satisfactory because typically a mostly lower case
string of 10 characters say, only occupies about 60-70% of the 10 X
notional character spaces. Thus it usually results in lots of blank space,
but for pictorial fonts, such as Korean and Japanese, where the
characters tend to be wide it may cause truncation or wrap-round of the
displayed string.
8.3.1.1 Tagwidth and ButtonWidth attributes
The introduction of an optional Tag width specification for TEXT,
OPTION, RGROUP and TOGGLE gadgets and ButtonWidth attribute for
RGROUP gives the user (and F&M) more control over the size of gadgets,
independent of any string content and is upwards compatible. This
allows the Appware writer the possibility of removing the unwanted
empty space in gadget tags and radio groups and greatly improves
alignment possibilities with other gadgets.
8.3.1.2 Relative Gadget Extent specification
Form layout syntax has been extended to allow gadget size specification
relative to the size of previously defined gadgets on the form. This
mechanism makes it easier to construct forms in which the widths and/or
heights of various gadgets need to be the same as one another.
The combination of tag width specification and gadget relative size
specification greatly improves the ability to produce predictable form
layouts. This is particularly important for the construction of intelligent
resizable forms, where the static layout must be correct, but may never
actually be seen because of resizing during the first display.

User Bulletin
8-3
Customisation
8.3.1.3 Button Width and Height specification

New Button Width and Height specification allows the Appware writer to
remove the unwanted empty space in Buttons and greatly improves
alignment possibilities with other gadgets.
8.3.1.4 New No gadget auto-alignment property for Forms
Traditionally PML Forms have the notion of a set of linear gadgets,
namely BUTTON, TOGGLE, TEXT, OPTION, single line PARGRAPH
and horizontal RGROUP with no tag. These are gadgets which fit within
1 vertical grid unit, and which are pseudo-centre-aligned with each other
when displayed. This pseudo-alignment gives sensible layout for simple
forms for PATH RIGHT (the default) and PATH LEFT, but introduces
small errors in all other circumstances.
A new form setup keyword noalign has been introduced, which prevents
this (historical) gadget auto-alignment from happening. If proper centrealignment of gadgets is required for horizontal layout paths then the
VALIGN CENTRE command should be used, which applies accurately to
all gadget types.
This NoAlign setting is recommended when designing new PML forms.
8.3.2 Form enhancements

8.3.2.1 New QUIT callback
Forms now have a QUIT callback which allows intelligent support of the
Quit/Close icon on the title bar of forms and the main application
window.
8.3.3 New SLIDER gadget

This allows the interactive generation of an integer value in a specified
range (see the border controls on 3D views). Vertical and horizontal
sliders are supported.
8.3.4 New radio group facility

It has become apparent that quite a lot of Appware overlays the radio
group gadgets (RGROUP and the deprecated RADIO) with other gadgets
e.g. toggles, texts, buttons, options to allow qualification of the selected
option. The Customisation User Guide and Reference Manual warn
repeatedly that overlaying gadgets is bad practice and unpredictable, but
it is not possible to include other gadgets within an existing radio group
gadget. We have extended the Frame gadget to have a radio group
User Bulletin
8-4
Customisation
property, and introduced a new radio button gadget, the Rtoggle, which
can only be added to Frames. The totality of radio buttons defined within
the Frame will act as a radio group. Any other gadgets can be added to
the Frame in the normal way.
8.3.5 List gadget enhancements

8.3.5.1 Multi-selection list new Start_Batch and Stop_Batch events
Multi-selection lists may now generate a batch of events. The metaevents START and STOP are now raised to bracket the set of
UNSELECT and the set of SELECT meta-events. Any programmatic
modification to the lists content or selections should only be made at the
STOP batch event.
8.3.5.2 New ADD methods for List and Selector gadgets
The methods ADD have been added to allow a single new entry to be
appended to the current set.
8.3.6 Option gadget enhancements

8.3.6.1 Scrolling of text within display field Option gadgets
The current value for a textual option gadget, shown within the display
field, can now be scrolled so that all of it can be seen. This enables users
to specify a gadget display width smaller than the drop-down list string
lengths.
8.3.6.2 New ADD methods for the Option gadget
The methods ADD have been added to allow a single new entry to be
appended to the Option gadgets drop-down list.
8.3.7 Miscellaneous
8.3.7.1 New FMSYS method to load/get a Form by name
Allows force loading of form definition and/or the ability to get a form
object from its name.
8.3.7.2 New Modified event for Text gadgets
The Text gadget now supports a MODIFIED event (action string).

User Bulletin
8-5
Customisation
8.3.7.3 Control of RGROUP radio-button active status

The methods setActive have been added to allow control of the active
(greyed-in) status of individual radio buttons of the RGROUP gadget.
8.3.7.4 Query background colour name using the .Background() method.
Most gadgets now support this method.
8.3.7.5 SHOWN event for tabbed forms
For frames which are tabbed pages within a Tabset frame, F&M now
generates a SHOWN event whenever the user interactively selects a
new tab. The event is only fired for tabbed page frames which have a
PMLOpen callback defined. This is so that we dont upset the current use
of the frame as Rgroup SELECT event, which can be applicable to tabbed
pages but can be handled via a simple (non-Open) callback.
If you want to manage tabbed pages which also contain RToggles, then
you must supply an open callback so that you can differentiate the
SELECT (rtoggle) event and the (page) SHOWN event.
8.4
Internationalisation
Several improvements have been carried out to improve the availability
of local language support in PDMS. Further work is planned for future
releases, when the whole handling of local languages is due to be
updated in line with Windows standards including Unicode UTF8
character handling throughout.
At this stage, the languages supported are as PDMS 11.5: details are
given in the Installation guide. However, the new .NET GUI does work
in a slightly different manner, so some of the recommendations are now
more important.
Use of local languages is supported for use in PDMS names and text, but
not for PDMS word attributes this affects things such as SKEY, PKEY,
COCO etc. or for username or password. They are not recommended
for use in filenames: if used, macros are more likely to work if run using
this syntax:
$M <filename>
rather than:
8.5
$M /<filename>
Localisation
Many of the PDMS user interface gadgets are now defined using
Microsofts .NET, so they may be handled by some of the new tools.

User Bulletin
8-6
Customisation
Localisation deals with customizing data and resources for a specific

culture or locale language. All .NET Add-ins (Explorer, Explorer
Settings, Reference List, DrawList, and My Data) are localizable in that
all text and context menu strings are defined in a binary resource file.
This file is called PDMSResources.resources and lives alongside
PDMSResources.dll i.e. the %PDMSEXE% directory. It is created from
the xml file PDMSResources.resx using the .Net utility RESGEN.
PDMSResources.resources is the default resource name. This is the
resource file that the .NET runtime will look for when running PDMS - if
there are no language-specific resource files available. If there is a
resource file that matches the current culture then PDMS will use this.
In order to customise the Add-ins the user can either modify the default
resource or create a resource file for the intended culture. For example,
to create a resource file for UK English culture (culture Name: en-GB)
copy the default resource file PDMSResources.resx to
PDMSResources.en-GB.resx and modify the copied file.
8.6
PML Encryption
*sp4*
PML encryption is a new option available to use with PDMS 11.6.sp4 and
future releases of PDMS. It is intended to allow PML developers to issue
their applications for general use without disclosing the source code and
hence the details of the techniques used.
8.6.1 Decryption
PDMS 11.6.sp4 onwards can run PML files that are encrypted using
AVEVAs pmlencrypt utility. The resulting PML files can no longer be
read or edited but no special action is required to run them in PDMS.
8.6.2 Encryption
The pmlencrypt utility is a separate program that encrypts PML files. It
is up to the user to decide which file(s) he wishes to protect in this way,
though it should be used only on PML functions, objects forms and
macros and not, for example, images that might be stored in the same
directory. It requires a PML Publisher licence in the license file (the
feature name is VPD-PMLPUBLISHER). Please refer to the user guide
for full details.

User Bulletin
8-7
Customisation
8.6.3 Buffering
Decrypting a PML file takes longer than reading a plain-text version, and
in some circumstances PML files may be re-read many times during a
session. (A new command PML STATISTICS displays information on the
numbers of times each file has been read and some extra information
useful to AVEVA when testing the Published PML facilities).
In order to reduce the time taken to re-read the files Published PML files
may contain a buffering directive in the header-line (the first line in the
file). If a dash and a number are included directly after the three-digit
encryption algorithm id, then PDMS will retain the file in memory
indefinitely once it has been read that many times.
You may wish to edit heavily used files to add buffering to the header by
hand, or may use the buffer 5 option of pmlencrypt.exe to include a
buffer after five reads tag in each file encrypted.
A value of five is a good number to start with. Many files are read
precisely once during module start up: there is little benefit in buffering
those files, and a value of five will avoid that, but apply to all heavily
used files.
If a file you are actively developing has a header including buffering, it
will not be re-read as often as you are used to. To force all buffered files
to be cleared from memory if they are not in current use you can issue
the PML REHASH or PML INDEX commands, or switch modules.

User Bulletin
8-8
Incompatible PML changes
9.1
Summary
Great effort has been made to maintain upwards compatibility between
the current and previous versions, while introducing major changes. The
following are known potentially non-upwards compatible changes.
9.2
Functional changes at 11.6

The button gadget method !button.val returns type Boolean rather than
type String. Note this is in line with the documented behaviour, but is a
change from the previous actual behaviour.
A menu can no longer be referenced from several different places in the
Main menu system, i.e. the menu bar hierarchy of a form. If users have
made use of this, they will need to duplicate the shared menus. This
should be restricted to the form definition and is essentially a cut and
paste job. An attempt to reference a menu more than once will cause an
error alert to be raised.
The restriction on the Shortcut menu system is that a given menu can be
called from different shortcut trees, but cannot be used more than once in
a single shortcut tree. Infringing this will cause an error alert to be
raised.
A menu cannot now be used both as a Shortcut menu and as a Main
menu. If users have made use of this, they will need to duplicate the
shared menus. Infringing this will cause an error alert to be raised.
Remember the recommendation to set the menu usage mode of all
shortcut menus to POPUP.
We have removed the unpublished menu and menu bar Marker field
facility. The Marker is an invisible field which acts as a reference point
for the Clear methods of Bar and Menu. If this facility has been used
then it should be replaced by use of the named menu fields and the Menu
and Bar editing enhancements.
The ability to assign a user defined Shortcut menu to the TEXT gadget
has been withdrawn, because it clashes with the default Edit shortcut
which allows standard cut, copy and paste actions on the text field.

User Bulletin
9-1
9.3
Layout changes at 11.6

The spacing between radio buttons within the RGROUP gadget must
now be set explicitly rather than being derived from the VDIST and
HDIST setting in operation at the point of definition.
We have switched to using variably spaced fonts to improve the overall
appearance of the user interface. This has produced various layout
changes, because the form co-ordinate grid size is determined by the
nominal character size for the font. The actual size of a given character
is rarely equal to this nominal size. Most lower case characters are
smaller than the nominal size (a, e, i, o, u, j, l, p etc.) whilst a few lower
case characters, numerics and upper case characters are often bigger
than the nominal size (m, W, M, K, 2, 3 etc.). In particular the space
character may well be relatively small. These relationships also differ for
different font families. Thus, for a string of, say, 10 characters, the actual
display length is generally shorter than 10 grid spaces, but may be longer
if most of the character are Big (i.e. larger than the font nominal size).
This has a number of repercussions:
1. The 'Width' specification for a gadget is the number of grid units
assigned to the gadget, not the number of characters that it can hold.
Often the gadget will be able to accommodate more characters than
width, but if the characters are all Big then it will accommodate
fewer than width. Some adjustment may be needed to existing
Appware to reflect this change.
2. A similar situation exists for gadget Tag text. The space assigned for
the tag text is determined as (number of tag characters multiplied by
the grid unit size), not by the actual size of the tag string. This
supports the use of padding tags with trailing spaces to achieve left
alignment of a column of gadgets, i.e. all the gadgets to be aligned
should be given tags with the same number of characters in their tag
texts. For existing Appware, there may be a few cases where gadget
tags have a high proportion of Big characters, and additional trailing
spaces will need to be added to prevent tht displayed tag being
truncated or wrapping round.
3. A similar situation exists for paragraph gadgets whose width is set by
the Text keyword, e.g. para .p1 Text|WAM|. In this example it is
probable that an extra trailing space will need to be added to the
string to prevent truncation.
4. The form title no longer contributes to the extent of the form, so forms
with long titles may now be shorter.
5. The menu bar size calculation is factored down because menu fields
tend to have few upper case and numeric characters. The menu bar
contributes to the form extent, so forms with long menu bars may now
be shorter. For dialog forms with a menu bar only and no gadgets, it
is recommended to declare the form Resizable if possible, or to pre-

User Bulletin
9-2
specify its minimum size to ensure that all the menu bar fields
actually appear.
9.4
Functional changes
*sp1*
9.4.1 Multi-selection list Extra Start and Stop meta-events.

At PDMS11.6 we introduced support for Extended Selection Mode for
multi-selection lists, whereby CTRL and SHFT keys can qualify the list
selection. As a result a whole set of UNSELECT events followed by a
whole set of SELECT events can result from a single (atomic) user action.
These events are presented in sequence, but Appware cannot tell where
the sequence starts or ends.
At PDMS11.6, problems may arise if a multi-selection list is
programmatically changed during the list callback. Modifying the list
content or its selection during the sequence can cause unexpected results
or even software crashes.
At PDMS11.6Sp1 we nave introduced new START and STOP batch
actions to bracket the sequence of UNSELECT and SELECT event
actions.
For maximum upwards compatibility, the START and STOP batch
actions are only notified to PML if the user has assigned an open
callback, since this is the only way that different event types (actions)
can be differentiated. Please see the PDMS Software Customisation
manuals for more information.
Appware which used simple callbacks and worked at PDMS11.6 will
continue to work because START and STOP events will not be notified to
it.
Appware which used open callbacks and worked at PDMS11.6 will
continue to work if the SELECT and UNSELECT meta-events were
explicitly differentiated in the callback, as shown below, because the new
START and STOP events will be ignored.
Define method .listSelectionChanged( !list is GADGET, !action is STRING )
...
if( !action eq SELECT ) then
...
elseif( !action eq UNSELECT then
...
endif
...
endmethod

User Bulletin
9-3
If you experience a change in behaviour, then you may need to rewrite

your callback to explicitly handle the new START and STOP events and
modify the list content or its selection only on receiving the STOP event
action.
For newly written Appware we strongly advise the use of open callbacks
to service multi-selection list gadgets!
9.5
Layout changes
*sp1*
The following changes may well not be apparent for most forms which
have been defined by relative gadget placement (as recommended)
The start position for an OPTION gadget has moved left by 1 grid unit.
The width of an OPTION gadget with unspecified width and content has
decreased.
The extent of a TEXT gadget with no tag has decreased by 1 grid unit.
The extent of an RGROUP gadget set by a long title (rather than by the
size of its included buttons) has decreased.
9.6
Parameterised Property attributes
*sp4*
Applications may need adjustment if this new option (at SP4) is used
see also note on upgrades to DARs programs.

User Bulletin
9-4
10
Updates to standard projects
10.1 Supports catalogue for MDS
*sp4*
The MAS project now includes a dictionary database for MDS

(MASTER/MDSDICT). Please note that MDS uses a lot of user-defined
attributes (UDAs); if you use the AVEVA projects but not MDS, you may
wish to defer this database to reduce the chance of reaching the limit.
The limit for UDAs will be increased for PDMS 12.
At this release, the dictionary database is still also supplied as part of
MDS, as before.
10.2 Australian Steel Catalogue
*sp4*
A new structural steel catalogue and specification for profiles conforming

to Australian and New Zealand Standards has been added to the
MASTER/STLCATA database at PDMS 11.6.sp4.
The catalogue includes profiles detailed in the relevant standards as well
as Tees cut from Universal Beams and Universal Columns derived from
data published by the Australian Institute of Steel Construction. Equal
Angles from New Zealand production have also been included.
The information sources used for the catalogue are:
AS/NZS 3679.1:1996 Hot-rolled bars and sections.
AS/NZS 3679.1:1996 Welded I sections
AS 1163:1991 Structural steel hollow sections.
Extracts from the Design Capacity Tables published by the Australian Institute
of Steel Construction (Australian Steel Institute).
The catalogue hierarchy follows that of the AISC (American) catalogue,

i.e. the Reference Data is self-contained within a reference STCA in the
appropriate shape STSE.
The profiles use the standard AVEVA Generic Types (GTYPE), as
detailed in the Structural Design Using VANTAGE PDMS manual
supplied with the product. Parameter naming, data set DKEY and
DTITLE attributes are based on the AISC (American) catalogue.
SPRF element names have been taken from the relevant standards
(without spaces). The Description attribute of the SPRF has been set to

User Bulletin
10-1
Updates to standard projects
the name of the SPRF with appropriate spaces inserted. The Description
attribute may be used in Draft to label a SCTN or GENSEC by setting
the label intelligent text to #DESC<FROM CATREF>.
The relevant Australian and New Zealand Standards do not specify
bolting cross-centre and backmark dimensions. The values given are
based on existing PDMS catalogue values for similar shape sizes from
other Standards.
Level and Obstruction attributes have been set for all shape geometry
elements in accordance with the following table:
Drawing
Levels
Representation
Obstruction
Value
Simple Draft
0-3
Detailed
4-8
Obstruction
9 - 10
Note:
Simple Draft representations have no root or toe radii included, where
applicable. Obstruction volumes have been constructed such that they do
not cover the detailed profile shape.

User Bulletin
10-2
11
Product Faults and User Requests
11.1
Known faults and Outstanding Issues
11.1.1 Windows fault correction available

ToolTips may not work properly, on computers with accelerated OpenGL
video adapter drivers, after starting PDMS 11.6. This is due to a fault in
Windows XP which is corrected in Service Pack 2: see
http://support.microsoft.com/?id=814135 and
http://support.microsoft.com/default.aspx?kbid=811113.
11.1.2 Windows faults file locking

There are faults in some versions of Windows related to file locking,
which is used for PDMS databases. These typically manifest themselves
as MCD errors or a PDMS session hanging. Hotfixes are available from
Microsoft for some versions of Windows and they are corrected in the
latest service pack of Windows XP.
Full details and the latest advice are given on the PDMS support pages
on the Internet.
11.1.3 Microsoft .NET Framework Hotfixes KB886903 & KB886904

Microsoft Windows Operating System Hotfixes (patches) KB886903 &
KB886904 for the .NET Framework can cause problems with PDMS.
These are security updates, so Microsoft recommends installation at the
earliest opportunity. For more details, please see:
http://support.microsoft.com/default.aspx?scid=kb;en-us;895242.
The version of the .NET Framework supplied with PDMS, which was
used by AVEVA for testing, is 1.1 for which the hotfix is KB886904.
However, users have reported problems with PDMS when this hotfix is
applied. PDMS Design and other modules fail to initialise and give a
series of errors, starting with:
System.InvalidOperationException: Unable to generate a temporary
class (result=1).
The simple solution is to uninstall the patch and reboot, after which
PDMS should start normally.
An alternative solution, which removes the vulnerability, is to upgrade to

User Bulletin
11-1
.NET Framework 1.1 Service Pack 1 (SP1) and then apply the correct
hotfix: KB886903.
11.1.4 PDMS faults & limitations future corrections (update) *sp4*

Unless otherwise indicated, the following faults will be corrected, if
possible, by the time of the next service pack.
Reference
Description
Module
Although use of international languages has been

improved for PDMS 11.6 & 11.6.SP1, there are still
various issues to be addressed in PDMS 12.
General
(1533)
PDMS cannot, in general, handle spaces in file

names or directories. This is due to the way in
which its commands are processed and cannot
easily be resolved, without some incompatibility.
Changes are being considered for PDMS 12.
General
(3777)
Centreline length output to file is incorrect in

Imperial (English) units.
Isodraft
(4366)
The extract control form did not handle deleted

sites correctly and cannot delete a site if one or
more sites are controlled by a DAC.
General
(4509)
(4510)
The Equipment application Option list selections

are not handled correctly. Planned for PDMS 12.
Design
(4863)
Under some circumstances, the General Model

Editor handle is incorrectly used in place of the
Pipe Component Modification handle. Planned for
PDMS 12.
Design
(5087)
The use of proportional fonts makes some screen

reports difficult to read: they will be changed to use
columns. An alternative is to produce a text file and
then view that.
General
(5285)
Member elements are not always correctly moved

Design
when a PNODE is moved or rotated. Improvements
have been made to positioning but rotation is still
not correct. Planned for PDMS 12.
HPD 28284
(6989)
PDMS sometimes runs slowly when using a thin

client implementation. This is being investigated
but can be improved by placing PMLLIB on each

User Bulletin
Design
(and
11-2
Reference
(9023)
Description
Module
client.
elsewhere)
No clash is detected with an XGEOM (laser model

point cloud) with no spatial occupancy map and
no warning is given.
Design

User Bulletin
11-3
11.2 Faults corrected and minor enhancements

This section briefly describes some of the most significant corrections and
improvements since PDMS 11.5 but not necessarily documented
elsewhere. Many of these will have been back-ported to earlier releases:
where this information was available at the time of writing, this is noted.
Please note that this list is not exhaustive: many other minor corrections
have been made. Users responsible for raising specific Software Change
Requests (SCRs) resulting in changes to PDMS should already have been
notified individually.
N.B. References in (brackets) are AVEVA internal numbers.
Reference
Description
First
Released
HPD 17392
HPD 17432
HPD 15676
Performance improvements on entering Design.
Design
11.5.0.1
Corrected setting of back references on CRFAs.
Full Service See User Bulletin for details:

pack
Updated AISC steel profiles catalogue to
Version 3.01.
Admin MDB Form performance enhancements
DABACON default buffer size increased
Nominal BDIA and BLEN for Bolts and

Hangers
Units option for height input to SPECON
Upwards of 50 minor improvements & fault

corrections
PDMS
11.5.SP1
HPD 14056
A set of gridlines (modelled by SCTNs with null

SPREF) was drawn if the only content of a View
but could disappear when other Design items
were added.
Draft
11.5.SP1
HPD 18376
Selection of a SCTN and then Goto>SPREF from

the members form used to navigate using the
SPREF NAME rather than the SPREF reference.
This caused incorrect navigation in the unusual
case of multiple SPREFs with the same name in
Design
11.5.SP1

User Bulletin
11-4
Reference
Description
First
Released
the MDB this is now corrected.

HPD 18378
Corrected a spurious error condition when

deleting members of a ZONE, when DACS are on,
using Delete>Members >All.
Design
11.5.SP1
HPD 21137
(3701)
The numbering of spool drawings that did not

start at a GASK or FLAN has been corrected.
This could lead to unset BOLTPARTNUMBERS.
Spooler
11.5.SP1.1
Isodraft
11.5.SP1.2
HPD 18208
Ability to add MTOLENGTH on a case by case

basis
Design
11.5.sp1.3
Isodraft
11.5.sp1.3
HPD 20676
(3683)
Wireline representation was faint with some

Design
graphics cards. This has been resolved by making 11.5.sp1.4
anti-aliasing (introduced at PDMS 11.5) optional.
It is now off by default but can be turned on by
setting the environment variable
SGL_ANTIALIAS=ON
HPD 16464
HPD 15743
No longer leaves phantom users in DARS and

design
DARs
11.5.sp1.5
HPD 22854
(3883)
Upgrading a project directly from 11.2 did not set

the database extract number
Admin
11.5.sp1.6
HPD 21916
HPD 22215
HPD 22899
HPD 22729
Flanges on the upstream and downstream side of

a component with MTOC and MTOT attribute set
to DOTU or DOTD are no longer flipped.
Flanged tees in the material list with the same
code and bores had different entries in the
material list but only one part number on the
isometric
Weld Bores were not shown as Nominal Bores on
the weld table when using Imperial Bores.
Spooler part numbering now checks LOFF to
ensure that OLETs do not split implied tube into
2 parts.
When the "MTOC" attribute is set to DOTD on
flanges, the bolt item was still created in
"COMPIPE" export file, even though it was not
Spooler
11.5.SP1.7
Isodraft
11.5.SP1.7
Isodraw
11.5.SP1.7
HPD 21274
HPD 22017
(3938)
HPD 22534

User Bulletin
Isodraw
11.5.SP1.8
11-5
Reference
HPD 23077
HPD 23143
(4011)
HPD 18109
HPD 23699
HPD 23868
HPD 21581
HPD 23772
(4190)
HPD 23891
HPD 24237
HPD 23756
(4249)
HPD 24305
(4353)
HPD 24095
HPD 24526
HPD 23649
Description
shown on the isometric drawing
Corrected wrong dimension (OLET TEE) if a
Text ATTA and a WELD have the same position
and an OLET is the previous fitting.
Panels & Plates application amended to create a
single penetration for a section through a panel
correctly.
First
Released
Isodraw
11.5.SP1.9
Design
11.5.SP1.10
Corrected fault in restoring display from binary

dump files.
Enhanced drawlist query (for MDS).
Tapered SCTNs with SPREF containing SREC
geometry were drawn prematurely shortened if
the tapering was more than around half the
original size.
Desclash now correctly records long names for its
clash reports.
Corrected Desclash failure with a very large
obstruction ( >20M in X, Y, Z axis)
Design
11.5.SP1.11
Partnumber now 0 for bend with SKEY TB*D

Bolts now correctly reported at out of spec valve
to nozzle (no gasket) connection
Corrected transformation applied to the graphics
of OLAY elements when these were defined by
external plotfile - potentially affected DXF &
DGN file export from DRAFT.
Pseudo attribute DACMOD did not work when
used within a collection
Design
11.5.SP1.13
Corrected operation of extracts: it previously

caused a DICE check to give the message:
Element n has an inconsistent entry in the name
table. Name exists in the table but a different
name exists on the element.
This was caused by renaming an element in an
extract, creating another element with the
original name and then flushing or issuing the
renamed element.
Global Extract Flush/Issue/Release used to lead to
inconsistent errors due to only part of a command
Design
11.5.SP1.14
Draft
11.5.SP1.14
Admin
11.5.SP1.14

User Bulletin
Design
11.5.SP1.12
Draft
11.5.SP1.13
Isodraft
11.5.SP1.13
11-6
Reference
Description
First
Released
being executed when the local daemon was not

running. PDMS did the child extract action, but
the parent extract action was lost. Following
Flush/Issue commands failed with a 613; Releases
had inconsistent claimlists resulting in error
messages:
Element n needs clearing from extract from
claimlist in parent extract.
Element n needs to be marked in parent extract,
as being claimed to this extract in parent extract
Element n is claimed to extract n, not a child
The child part of the extract is now undone if the
local daemon is not running. The command will
have to be resubmitted once the daemon is back
up.
HPD 24817
HPD 20482
HPD 22731
(3834)
HPD 24054
HPD 25141
HPD 23330
HPD 24636
(4709)
DICE reported a corruption where an element

was not registered in its owners member list:
Element =n/n is not in the member's list of its
owner =n/n
For example, this sequence:
In Master
Create /PIPE1
Create /BRAN
In Extract
Create /PIPE2
Move /BRAN to /PIPE2
Flush /BRAN
Meant that /BRAN was not in the member list of
/PIPE2.
DICE can now patch this fault.
Design
11.5.SP1.15
Axes and element name (Query>AXES option) are

now correctly displayed on the graphical view,
even when clipping is turned on.
Design
11.5.SP1.16
Draft
11.5.SP1.15
Admin
11.5.SP1.15
Print view distorts the view on the printer

Updating or checking numbering of a SPLDRG
results in termination with DB error 41

User Bulletin
11-7
Reference
Description
First
Released
HPD 23773
HPD 25939
(4756)
HPD 25723
Amended relative movement form when used

WRT element itself.
Design
11.5.SP1.17
Isodraft
11.5.SP1.17
HPD 25083
HPD 25860
HPD 25563
Position Explicit (AT) with LOAP gave the

following incorrect error message:
(2,211) Attribute ORI cannot be evaluated for
LOAPOINT /1210-10-1/ANCHOR - max.level of
nesting exceeded'
Q P1 BOLT TOTAL did not work with one branch
with a flange connected to PTAIL and a second
branch connected to the first. The second branch
had a gasket and flange connected to PHEAD.
Choose form did not output HEIGHT values with
the correct units
Selection of Tee with ARRIVE 3(!) and LEAVE 1
or 2 sometimes incorrectly gave error message:
(61,164) SPEC does not contain elements
matching given criteria.
(3123)
Database 'Marks' are now cleared by GETWORK
11.6.SP2
HPD 22229
Global Extract ranges could not be applied using

the GUI.
Corrected Expunge User Process form: the date
was incorrect for most of the entries.
Admin 11.6
Corrected occasional WIGWAM Primitive Group

overflow (error 21) typically on company logos
composed of 1000s of STRAs. (SKE ORIG ALL IN
gid or SKE POIN ALL IN gid).
RENAME text gadget on COPY form now works
correctly with or without the / preceding the
name.
#PROJ^DESC corrected for Global projects.
DATE field now correct when creating e a DRWG
from a TEMPLATE.
Code words such a #P^POS & #PK^POSS did not
work for TEXPs of VNOTs.
Customer specific set-up file for configured DXFoutput did not correctly set up DRAFT Utilities >
DXFout > Configured.
Draft 11.6
HPD 26241
HPD 15174
HPD 20154
HPD 22250
HPD 24115
(4153)
HPD 26286

User Bulletin
11-8
Reference
Description
First
Released
HPD 11795
(3277)
The Export of some panels to Review was

incorrect, so they appeared black. This was due
to an incorrect calculation of the normal to the
end surface of extrusions, which now always point
outwards.
List Gadgets now correctly grey out when
inactive.
Q MTBE or Q BRCOG used to crash with
DABACON 18 error when the CE was implied
tube of hanger.
3DView.shaded boolean now returns correct value
Copy with Offset form failed to display if it had
been used to refer to a deleted element: it now
defaults to /*.
Error fixed that caused syntax error when
modifying the position line or joint line of a joint
(MODIFY>JOINTS>POSITION LINE).
Macro error corrected for Modify>Joints>Joint
Like.
Corrected macro error for
ModifySectionsMerge and then selecting
Sections in List.
Trying to modify the position line of a fitting on a
section gave syntax errors in line 119 of Macro
%PDMSUI%/DES/CLIB/GPLINE
Tidy Gtypes macro on SCTNs with template
fittings gave errors:
(2,752) Array element 7 does not exist
In line 49 of Macro
%PDMSUI%/DES/STLWRK/MSETGTYPE
A steelwork joint with an associated plotfile but
no editable properties now correctly displays the
plot.
Design 11.6
Error removing weld symbol from FLANGE when

P-point 2 PSKEY set to PLAIN.
Incorrect continuation nozzles no longer drawn
when using FTUBS
ISODRAFT now handles explicitly set BTHK
Isodraft
11.6
HPD 14470
HPD 18365
HPD 19125
HPD 22572
(4013)
HPD 23149
HPD 24304
HPD 24504
HPD 25367
HPD 25368
HPD 26863
HPD 18490
HPD 24072
HPD 25430

User Bulletin
11-9
Reference
Description
(5508)
HPD 26118
values of BLTPs of BTSE for wafer components.

Using universal keys caused a splash fatal error
in certain cases.
Redefinition of Spec Break ATEXT caused
information to be missed off drawing.
See Remedy call for details. Isometrics with no
material list had incorrect spool numbers with
Spool Number PREFIX *K
EXTRACT CLAIM LATEST gets the latest
claimlist for all writable DBs. This entails going
through a share lock on each DB.
HPD 26213
HPD 26562
HPD 15643
(2985)
First
Released
General
For large projects this can be time-consuming so

the syntax has been extended to allow:
EXTRACT CLAIM LATEST DB <dbname>/ALL
and allow specific db to be given.
In ADMIN it is no longer permitted to say just
EXTRACT CLAIM LATEST specifying a db is
compulsory. Elsewhere it is optional.
HPD 14636
(3399)
Improved performance when merging large

number of sessions.
General
HPD 18268
(3402)
OUTPUT now correctly adds quotes when an

STEX string begins with ( .
Paragon
(3413)
Increased the max insulation thickness from 150

to 300mm.
Design
HPD 18402
(3420)
Now handles a user doing PARTNO CREATE CE

when another user has just created the spool
drawing & still has it claimed.
Spooler
HPD 18641
(3431)
The following pseudo attributes may not be used

in catalogue expressions:
ATLE, LTLE, AGRD, LGRD, FITLEN, MTLE,
STLE, STAP & MTCL.
Design
Use of ATLE previously caused a crash in Design

when the item using such a ppoint was drawn.
HPD 18874
(3464)
CONN PH to P4 of /PAD4 now correctly sets

CRFA of /PAD4 if initially unset.

User Bulletin
Design
11-10
Reference
Description
First
Released
(3520)
Element with duplicated names in two extracts of

the same database caused problems on flushing
back to the parent database.
Data listings are now always output in forwards
mode: previously numbering could get confused.
Design 11.6
HPD 18959
(3529)
Design
HPD 14758
HPD 16772
(3541)
Resolved a problem with Report formatting with

Design
subtotalling. If a value results from several values
being subtotalled, then it no longer appears on a
new line in the report.
HPD 20176
(3628)
Modify>Sub Equipment Origin>ID Point now

clears the SUBE name is after the user accepts
the location of new origin point.
Design
HPD 20222
(3648)
Text strings in DXF output are no longer limited

to 128 chars, as expanded text from DRAFT can
be up to 180 chars.
Draft
HPD 20167
(3651)
UDAs with non alpha names now work in PML2

expressions, e.g.
General
!XX = !!CE.:UDA-LIST
HPD 19946
(3653)
The ACBORE on a CMPD is no longer treated as

a nominal bore, so when set to 38.14 it is not
changed to 40!
Propcon
HPD 20364
(3660)
Query !!ce.inth now returns ZERO (0) were

insulation is unset for a component.
Design
HPD 20798
(3682)
Q BRWEI no longer crashes if the CE is a pipe

which owns restraints.
Design
HPD 20968
(3699)
!X = !!CE.PTCDIR now works correctly.
General
HPD 21379
(3724)
RESELECT now works for tees & reducers
Design
HPD 21328
(3809)
Data output command no uses a greater precision

(1/8192) with FINCH DIST.
Design
HPD 22751
(3837)
PDMS no longer crashes when the Explorer ADD

CONNECTED option is used with the connected
branch deleted.
Design
HPD 23033
Several improvements have been made to the
Design

User Bulletin
11-11
Reference
Description
HPD 23039
(4008)
(4009)
behaviour when creating and modifying ring

GENSECS, using the Create Ring and Modify
Section (Ring) forms.
HPD 23041
(4010)
Deletion of CURVE element of SPINE using

Modify Section (Curve) form produces error
message and does not complete deletion.
First
Released
Design
If a CURVE element is deleted using the Delete

button on the Modify Section (Curved) form an
error message is displayed, see attachment, and
the deletion is not carried out.
HPD 22577
(4012)
If you set the frame of reference to the SCTN that

you are trying to move, the resulting position is
no longer incorrect (by a long way!)
Design
(4033)
A number of improvements have been made to

SP1 to ensure that a list, option gadget and
textbox with the same width specified in the form
definition now have the same overall width.
General
Many other improvements have been made to

forms & menus layout, visibility etc.
(4062)
HPD 23467
(4084)
With 2D views, the arrow keys seem to be locked

to the horizontal scroll bars and do not work
properly.
Lists/Collections form, using Add>Selection
GUI
General
ALL types no longer outputs a syntax error.
HPD 23523
(4106)
Dice can now patch the case where elements have

been lost from the member list of their owners.
Admin
HPD 23609
(4117)
Error D800 is now included in the Design Ref pt 4

manual.
Design
(4186)
Dice now outputs highest session number.
Dice 11.6
HPD 23891
(4206)
Clashes are no longer missed when a very large

object is checked against a small obstruction item.
Design
(4300)
Dice no longer crashes on corrupt database
Dice 11.6
HPD 24095
HPD 24526
(4408/4410)
Out of sync name tables (possibly caused by a bug

in extract flush) are now patched by Dice.
Admin 11.6
11.5.sp1

User Bulletin
11-12
Reference
Description
First
Released
(4430)
Problem opening these other Databases will no

longer cause DICE to fall over.
Admin 11.6
(4433)
MODE FULL and MAXERROR of 0 are now the

default settings on entry to Admin.
HPD 24237
(4346)
There is now no Partnumber for bend with SKEY

TB*D
Design
(4474)
Correct precision now displayed in GUI for

imperial units.
Draft
HPD 24998
(4543)
Options>Modify form: Select Component Tags

now includes FILT.
Isodraft
(4568)
The Head and Tail type markers do not resize

during an align with feature operation when the
view is zoomed in.
The View manipulation for the Draft 3D View
window has been improved for SP1.
Design
HPD 19944
HPD 18705
HPD 24431
(4757)
Amended unwanted clipping when rotating the

view around an element.
Design
HPD 24648
(4760)
When adding Routing Planes as a constraint to a

branch, the form in Design now shows all the
RPLAs in the MDB, not just the current
database.
Router
HPD 24557
HPD 24531
(4761)
HPD 25281
(4783)
Global Stand alone Project creation using the

Admin
upgrade option adds unnecessary lines in inmacro
that creates a loss of catalogue references: the last
section must be removed for it to work correctly.
Modification of ACR GROUPS using the
Admin
application has been amended.
HPD 25293
(4804)
MicroStation (.DGN) files have been corrected to

enable DGN file export.
Draft
HPD 22623
(4819)
The case of an unset filename for File on the

DATACON form is now handled better.
Design
HPD 25357
(4874)
Corrected an error causing some primitives of a

catalog component to be omitted from the display.
Design
(4471)

User Bulletin
Draft
11-13
Reference
Description
First
Released
(SGL errors were also output)

HPD 24880
(4908)
The Utilities>Pipe penetration application no

longer leaves the aid axes behind.
Design
HPD 20192
(4918)
The Create Extrusion form no longer creates two

slashes (//).
Design
HPD 25539
(4919)
The Nozzle Specification (FNOZZPEC) form has

been amended.
Design
(4926)
Corrected a problem on entry to PDMS with

Korean MDB name.
Monitor
11.6
(4933)
Query>Project>DBs now gives correct details for

those with Korean names.
Admin
(4980)
Resolved a problem merging Extract Databases

containing sessions that point to a base session in
the owner. Previously an error meant that
running Dice on the Child Extract gave a Bad
Block FATAL error, with the rest of the database
not being checked.
Error in bolt querying corrected.
Admin 11.6
HPD 25083
(4994)
Design
Q P1 BOLT TOTAL did not always work correctly

with branches connected together.
(5015)
UNDO now works more reliably with the model

editor handle position.
Design
(5016)
Corrected an error with Project form for project

descriptions containing Korean characters.
Admin
HPD 25602
(5020)
An error causing memory to leak in PML (TCTL)

has been corrected.
Design
(5035)
The Reselect command is now available outside

the model editor from SP1.
Design
(5154)
With a sheet consisting of more than one view,

the preview for offset section planes is not clear.
Position>Explicit (At) Form corrected when used
with loadpoint LOAP.
Draft
HPD 25723
(5208)
The following error message used to appear:

(2,211) Attribute ORI cannot be evaluated for

User Bulletin
11-14
Reference
Description
First
Released
LOAPOINT /1210-10-1/ANCHOR max.level of

nesting exceeded.
(5212)
HPD 25563
(5228)
An AREADE element containing an ABOX does

not correctly copy it fails to copy the ABOX and
gives a misleading error message.
Resolved a problem with selection with a TEE
with ARRIVE 3(!) and LEAVE 1 or 2, using the
syntax:
Design
!Select = SELECT LSTUBE WITH SHOP TRUE

(5284)
A docking form that is undocked will not show

ToolTips on pixmap buttons.
Can now save the Define Purpose file using the
SaveAs option.
GUI
HPD 26241
(5382)
Correct dates now shown on the Expunge User

Process form.
Admin
HPD 22229
(5384)
When setting the Global Extract range for an

uninitialised location, the user is asked if he
wants to initialise the location. A No answer is
now handled correctly.
(Global)
Admin
(5387)
The list gadget allows data as strings to be added

as columns separated by a TAB character. The
expression object used for columns, tables and
report objects at SP1 allows the tab character to
be used so that the data can be added directly to a
list from a table/report.
General
(5427)
(5428)
Some PDMS blocking forms prevent the user from General

accessing other applications, including MS Office
etc.
If the ADMIN/PADD DB is deferred when the
Draft
user tries to display the 3D View window, Draft
would crash with Dabacon 41 error. This is
handled properly in SP1.
(5370)
(5459)
(5550)
The + and - keys have been implemented in SP1

such that + increases the offset or clearance from
the plane defined by the feature, - decreases this
value.

User Bulletin
Design
Design
11-15
Reference
Description
(5555)
An error when producing Check ISOs of unnamed Design

spool elements has been corrected.
(5559)
Correction of an error causing the message

(2,751) Variable !!REALFMT does not exist
when querying attributes.
Certain changes are treated incorrectly during
reconfiguration of extracts
Direction of movement of a component at the tail
of the branch using the GUI has been corrected.
General
(5698)
Resolved a problem when flushing any element

would result in a Dabacon 534 error.
General
HPD26626
(5704)
The default value DPRO is now used to evaluate a Design

text property. It is used for the real equivalent
RPROP.
HPD 27087
(5716)
A correction has been made to avoid an incorrect

message:
(99,532) Undefined UDA name
when using long uda names.
(5719)
Form now tracks the problem item on the Data

Consistency Form.
Correction to allow concatenation of a method to a
UDA value.
Design
(3287)
DICE now increments the session when it patches

a database, thus ensuring that Global correctly
recognises and distributes any necessary changes,
including claim lists.
Dice 11.6.0
(5791)
Invalid entries in name tables (i.e. invalid

references) are now corrected if possible.
A partial flush will now ignore any invalid table
attributes and carry on.
Dice
(5613)
(5625)
HPD 27082
(5726)
(5793)

User Bulletin
First
Released
Admin
Design
General
General
11-16
*sp1*
Please note that this list is not complete: many corrections were made to
faults discovered during internal testing and early evaluation. Some of
these may also have been back-ported to earlier releases.
Reference
Description
Module
HPD 23235
(4130)
The axis is no longer left the object being

created/modified after leaving the HVAC
application.
Design
11.6.sp1
HPD 25543
(5051)
Export does not export leave rod from hangers.
Design
11.6.sp1
HPD 26315
(5406)
HPD 26936
(5680)
Wigwam overflow crashes with a very large

number of EXTRUsions or error messages, e.g.
Error 21s (Primitive Group too long) from
GOPPLN, when drawing large models created
using ImPLANT. Existing checks need to be
extended. Splitting or simplifying the model will
usually help.
Draft
11.6.sp1
HPD 26447
(5477)
Connect button is no longer greyed out to prevent

connection of ph to first mem after it was
connected to a PT.
Design
11.6.sp1
HPD 26802
(5625)
Creation of a component starting from the tail of

the branch with a spool between the TAIL and
the component now goes in the correct direction.
Design
11.6.sp1
HPD 26863
(5634)
A steelwork joint with an associated plotfile but

no editable properties will no longer have the
plotfile button greyed out on the Joint Spec form.
Design
11.6.sp1
HPD 22396
(5725)
Corrected a possible SPLASH crash for GLAB (&

probably SLAB) with invalid DDNM when
repositioning using command AT @.
Draft
11.6.sp1
HPD 27043
(5732)
Text evaluation of a selection now adds brackets

around a VTEXT variable.
General
11.6.sp1
HPD 19575
(5754)
Modify>Component>Connection Ref. now works

correctly for a CROS.
Design
11.6.sp1
HPD 23235
The axis is no longer left at the object being
Design

User Bulletin
11-17
Reference
Description
Module
(4130)
created or modified after leaving the HVAC

application
11.6.sp1
HPD 19243
(5756)
Access control methods are now properly invoked Draft

before creating a ADDE/REME element, ensuring 11.6.sp1
that the ADD command does not create a new
ADDE under an IDLI when it is not claimed.
HPD 27197
(5747)
Component selection form no longer shows an

error if component is in LIMBOSPEC
Design
11.6.sp1
HPD 19602
(5752)
Settings>Storage Areas option Create>Level

brings up the buildings level form: this now
works better if the Apply button is used without
giving a name.
Design
11.6.sp1
HPD 19630
(5763)
A PML error caused by deletion of the PLOO

element of a rectangular panel has been
corrected.
Design
11.6.sp1
HPD 27430
(5775)
Resolved problem of losing the temporary

graphics after popping up the modify labels menu
if the cursor is off the graphics window.
Draft
11.6.sp1
HPD 26914
HPD 27671
(5780)
Corrected quantity for bolt material if there are

more than 100 bolts in one flanged connection.
Isodraft
11.6.sp1
HPD 27469
(5800)
Corrected a calculator error when using Delete

range of piping components button in imperial
units.
Design
11.6.sp1
HPD 27468
(5801)
A correction has been made for mixed pipe bore

handling when using Quick Pipe Router.
Design
11.6.sp1
HPD 27553)
(5764/5809)
Datal output for "BACK" now correctly outputs

certain cascaded attributes such as SIZE, XYPS
if they are set.
Draft
11.6.sp1
HPD 27472
(5811)
HPD 27766
(6697)
Improved equality check for two PML variables of General

data type BORE. This means that components
11.6.sp1
will be correctly matched.
HPD 27191
(5817)
Member .detail of AVEVA object GPHPOSITION

corrected to work with Imperial FINCH units.
Design
11.6.sp1
HPD 27893
Plotfiles in tabbed frames no longer make PDMS
Design

User Bulletin
11-18
Reference
Description
Module
(6707)
crash or hang.
11.6.sp1
HPD 27884
(6708)
It is no longer necessary to set dock or anchor for

tabbed frames to create a scrollbar, as they are
now treated as Dock Fill.
Design
11.6.sp1
HPD 27883
(6709)
It is now possible to give tabbed frames tags after

they have been created.
Design
11.6.sp1
HPD 27882
(6710)
It is now possible to make tabbed frames

invisible.
Design
11.6.sp1
HPD 27946
(6729)
Branch weight of first tubi now gives correct

weight.
Design
11.6.sp1
HPD 27956
(6734)
comPropData.pmlobj corrected for nozzles
Design
11.6.sp1
HPD 27987
(4422)
(6741)
Unhandled Exception error message is no longer

when Auto-hide option is used on the Command
Line.
Monitor,
Admin
HPD 27623
(6763)
PDMS will no longer crash when checking pipe

with missing references on hangers.
Design
11.6.sp1
HPD 16869
(6774)
Correction for tube weights in material list.
Isodraft
11.6.sp1
HPD 28142
(6786)
If PML discovers an incomplete DO loop on an

ENDMETHOD, it now issues an error message
as well as tidying up.
General
11.6.sp1
HPD 28030
(6829)
Picking of REST/HANG elements now works

correctly when representation for insulation is
set to translucent.
Design
11.6.sp1
HPD 28292
(6834)
Corrected a problem closing sheet, after a

deletion. This led to an error messages
(2,109) Undefined name
and afterwards
(47,15) CP: Syntax error
for any activity.
Draft
11.6.sp1
HPD 28331
(6840)
Components created using the new component

creation form will no longer always have the
SHOP set to FALSE, regardless of the spec.
Design
11.6.sp1
HPD 28434
(6875)
Improved visibility of Zoom box on plot view.
Isodraft
11.6.sp1

User Bulletin
11-19
Reference
Description
Module
HPD 28280
(6879)
Setting obstruction to anything but OFF no

longer makes all the steel section disappear.
Design
11.6.sp1
HPD 28394
(6886)
Correction to allow the steelwork joints on the

MTO.
Draft
11.6.sp1
HPD 28478
(6893)
Corrected an error when LOCKing the WORLD!

No longer gives a Runtime error with the error
message 'Unhandled Database Error 10 from
DGOTO, invalid external reference'
Draft
11.6.sp1
HPD 28515
(6906)
Moving a branch no longer navigates to a

different element.
Design
11.6.sp1
HPD 28528
(6923)
PRESSURE and TEMP are not showing on the

iso properly; they are being converted with the
UNIT (showing as FEET and INCHES).
Isodraft
11.6.sp1
HPD 28407
(3525/6924)
Improved the speed of GETWORK in Draft.
Draft
11.6.sp1
HPD 28587
(6925)
Resolved text problems with Cyrillic fonts in DXF

output.
Draft
11.6.sp1
HPD 23469
(6972)
Corrected an error in the description for 1" 90deg

elbows.
11.6.sp1
HPD 23470
(6973)
Corrected various problems with Spec Breaks:

1. At some breaks no break marker boxes were
shown.
2. Only one marker box was shown at CONT.ON
(REC -30).
3. Marker for a single spec instrument was
missed out.
4. In some cases, the lines for the positioning
were too long.
Isodraft
11.6.sp1
HPD 28468
(6990)
Corrected a problem with the component mouse

pointer when using modify mode to rotate or
move a piping component.
Design
11.6.sp1
HPD 28583
(6993)
The case where a JOIS or JOIE attribute on a

SCTN element was an invalid ref (as correctly
noted by DICE) was not being handled by
CHECK (Datacon). This situation is now trapped,
and an error 'Structural Geometry Error - JOIS
(/JOIE) reference invalid' will be produced.
Design
11.6.sp1

User Bulletin
11-20
Reference
Description
Module
HPD 28470
(6996)
Modify Mode now correctly moves the Pipe Head

or Pipe Tail, when there is a connection across a
pair of flanges.
Design
11.6.sp1
HPD 28762
(7162)
Itemcode from UDA now works correctly when

the number of UDAs exceeds 30.
Isodraft
11.6.sp1
HPD 28912
(7173)
Utilities > Export > Dump Attributes utility now

works correctly when is a BRAN component that
has an unset or bad SPREF.
Design
11.6.sp1
HPD 28933
(7298)
Creating Corner Posts with the ASL Modeller

application now locates the corner posts correctly
with an imperial project.
Design
11.6.sp1
HPD 28965
(7398)
Can now modify floor fittings.
Design
11.6.sp1
HPD 27131
(7520)
Module switch will no longer crash when there is

an instance of user defined object with member(s)
of type EXPRESSION.
PML will now not attempt to save any objects
which have any C++ members, such as the
Expression object. This is because any such PML
object is not saved over a module switch.
General
11.6.sp1
HPD 28477
(7539)
Q BREARE now gives the correct result for a

TUBI after a REDU.
Design
11.6.sp1
HPD 28477
(7661)
Highlighted elements are no longer displayed

Design
wrongly.
11.6.sp1
Formerly, if you identified a portion of tube in the
graphical view and then moved to another item in
the view, the portion of line that you have
identified previously would change to dotted (in
wireline) like there is an error on that portion of
pipe.

User Bulletin
11-21
*sp2*
This lists the most important corrections in Service Pack 2, at the time of
writing (October 2005).
Reference
Description
Module
HPD 16305
(2879)
HPD 29325
(7908)
HPD 29632
(7929)
Dice sometimes incorrectly showed errors in large

Dabacon tables.
Dice
11.6.sp2
(3418)
Pline Definition window now correctly displayed

Paragon
on selecting Modify mode, deleting the created
11.6.sp2
Pline and then re-calling the form in Create mode.
HPD 23332
(4127)
A POHEDRON of zero thickness now Exports to

Review correctly.
Design
11.6.sp2
(4495/8458/
8229)
Dice now correctly handles errors in tables due to

corrupt data, rather than crashing.
Admin
11.6.sp2
HPD 24925
(4758)
Corrected an error causing report templates to

fail thus:
Reporting
11.6.sp2
(also fix for
11.5)
WARNING Data too long for variable. Data

truncated.
This was due to inconsistent limitations in
passing arguments between macros.
(5254)
Form layouts improved, e.g. relative offset
Design
11.6.sp2
(5377)
Exception error when using UNDO and Quick

Pipe Router
Design
11.6.sp2
(5457)
Relative move form now shown correctly after

deleting equipment
Design
11.6.sp2
HPD 30534
(6711/8171)
Many improvements were made to robustness,

when used on damaged databases, including:
Deletion of a primary element in a master
database could lead to errors when modifying it in
a variant.
DICE
11.6.sp2

User Bulletin
11-22
Reference
Description
Module
HPD 29571
(7999)
(6728)
Option to allow a partial flush to work with

deleted elements with the same name.
11.6.sp2
HPD 25316
(6757)
SKEYs WLR and WLC have been added for use to

show lugs. The default symbol for both is the
same as a NIPL OLET, but without the bore data
and elevation messages.
Isodraft
11.6.sp2
HPD 25340
(6981)
Limitation in DACs condition setting form

corrected.
Admin
11.6.sp2
HPD 27267
(7089)
Modifications to prevent excessive database

growth during issuing or flushing.
(Dabacon)
11.6.sp2
HPD 29068
(7431)
Group reference list now allows for element

appearing more than once caused crash
Design
11.6.sp2
HPD 29217
(7589)
Corrected spurious cut length number for elbow

upstream welded attachment.
Isodraft
11.6.sp2
(7670)
Plines can now be highlighted or selected on

Gensecs, as on Sections.
Design
11.6.sp2
(7709)
Pipework Pipe Component Selection form now

shows Spec correctly after a change.
Design
11.6.sp2
HPD 29394
(7768)
Corrected OLET Item Numbers display in the

isometric graphics area, for specific options
including user defined columns.
Isodraft
11.6.sp2
HPD 29404
(7769)
New option to suppress continuation notes, giving

the number of the sheet, across sheets of a
drawing. This command controls only the arrowed
continuation message; other aspects of the
continuation are unchanged. Examples:
CONTS OFF: Continuation notes between sheets
are suppressed.
CONTSHEET ON: Continuation notes between
sheets are switched on.
Isodraft
11.6.sp2
HPD 29415
HPD 29847
(7777/7990)
Corrected Dabacon error 23 or 10 on flushing an

extract Database containing differing length
UDAs.
11.6.sp2
HPD 29468
(7804)
The customary warning when a licence is due to

expire shortly is now working again.
General

User Bulletin
11-23
Reference
Description
Module
(7807)
Pipe and branch names are now displayed

correctly in the Component Creation form
Design
11.6.sp2
(7808)
Bore text is now displayed correctly in the

Component Creation form
Design
11.6.sp2
HPD 29292
(7699)
(7813)
(7814)
(7818)
(7828)
(7833)
(7847)
Bores are now correctly handled for both imperial

and metric projects when creating components.
Design
11.6.sp2
HPD 29556
(7877)
Clashes are not detected if implied tube is badly

aligned, i.e. is shown dotted in the 3D graphics, as
it is not included in the spatial map. Under some
circumstances, this could be misleading: for
example, if different tolerances are used for
drawing and for building the map. Rather than a
bad alignment message, new D860 & E860 (for
Arrive & Leave tube) error messages are now
issued when data checking when the tube is not
in the map. These state:
TUBE DOES NOT EXIST IN THE SPATIAL
MAP, NO CLASH WILL BE DETECTED
Design
11.6.sp2
(also
11.6.sp1.5)
(7888)
An error causing an exception when using the 3D

view has been corrected. Features were not being
rotated with the model, so they appeared in the
wrong place, and could not then be associated
with the model. Placing the cursor in the 3d
window then caused a crash.
Draft
11.6.sp2
(7894)
An attempt to rotate a deleted selection will no

longer cause an Unhandled Exception error.
Design
11.6.sp2
(7895)
Labels now snap to the origin of the label in

modify mode with snap to grid turned on.
Draft
11.6.sp2
HPD 29591
(7915)
Resolved Dabacon crash with certain data when

querying PQAANG this caused a Runtime
Error when Branch Reconnection or Data Check
was carried out.
Design
11.6.sp6
(and
11.6.sp1.1)

User Bulletin
11-24
Reference
Description
Module
(7917)
Use of model editor on HVAC branch no longer

causes a null reference exception error.
Design
11.6.sp2
(7918)
Resolved occasional exception error, due to

operations being attempted on a closed 3D view.
Design
11.6.sp2
(7919)
Various uses of the Reference Definition

Application form while in Model editor mode
caused a run time error. These have been
corrected.
Design
11.6.sp2
HPD 29726
HPD 29860
(7939)
Corrected poor form layout when using some

Asian languages
Design
11.6.sp2
HPD 29529
(7945)
Improved Equipment Positioning on Panel

surfaces.
Design
11.6.sp2
(7951)
Resolved a fault causing Dabacon errors such as

Unhandled Database error 41 in Extract
databases.
11.6.sp2
HPD 29776
(7965)
Resolved ERROR in SPLASH routine HADDIA

when detailing an Equipment Trim.
Isodraft
11.6.sp2
HPD 29886
(8017)
SPLASH Error in routine HGETI1 when floating

a second Graphics window has been corrected.
Design
11.6.sp2
HPD 29206
(8048)
The PREPROCESS and POSTPROCESS

commands have been modified to use the
maximum string length of 250 characters before
processing, e.g. for embedded quotation marks.
Isodraft
11.6.sp2
(8052)
Corrected spurious message: (160,9) File

%PDMSUSER%/frame-coords.txt does not exist.
This occurred on the first attempt to list the
attributes of an element in the explorer.
Design
11.6.sp2
HPD 30077
(8147)
(8206)
System incorrectly called for Final Designer

license feature. This also caused many errors in
the log-file when there was no such license.
Draft
11.6.sp2
(8162)
Corruption in Name table now prevented when

name of element (deleted in variant) is re-used in
owning extract.
11.6.sp2
(8183)
Dice will now correct reports errors of the form:

Next bucket is 6 but bucket 6 found in extract 3.
Dice
11.6.sp2

User Bulletin
11-25
Reference
Description
Module
(8184)
Crash in Dice when doing a check db with patch

on.
Dice
11.6.sp2
(8208)
Extracts no longer created with wrong team using

Admin GUI.
Admin
11.6.sp2
(8221)
Resolved a fault causing Dabacon error 41 when

doing "extract refresh.
11.6.sp2
(8228)
Entries were being left in the Spatial Map when

elements no longer existed: a Dice check reported
this problem. Now handled correctly.
11.6.sp2
(8233)
In a global project, all changed extract files must

be propagated after compaction before databases
are used. To ensure this is done, Dabacon now
checks and handles this situation by checking the
compaction count.
11.6.sp2
(8246)
Co-fitting now correctly applies referenced

negative geometry, when splitting a panel.
Design
11.6.sp2
(8306)
A SBFI (sub-fitting) can use the ARRIVE

attribute to specify a P-point of the owning CMFI
(compound fitting) to alter the frame of reference
for its geometry and orientation. In this case, the
system now correctly uses the design points of a
CMFI defined as a TMPL in place of the P-points
of one using a catalogue definition.
Design
11.6.sp2
(8308)
The EDG measure utility now works correctly

when in graphics mode.
Design
11.6.sp2
(8328)
In certain circumstances, the Commands form

'Request' panel became 'see-through' now
corrected.
Design
11.6.sp2
(8360)
Dice now handles transaction databases better, to

avoid misleading error messages due to the
databases growing whilst DICE is running its
checks.
Admin
11.6.sp2
(8383)
Corrected a fault with linear grids, causing a run

time error when clicking any point on the dotted
line.
Design
11.6.sp2
HPD 29073
HPD 30189
Clicking on a ROD element no longer causes a

crash after a message Unhandled Exception:
Design
11.6.sp2

User Bulletin
11-26
Reference
Description
(8376)
System.NullReferenceException.
HPD 30284
(8427)
Certain PML forms could cause an error (61,564)

F&M Cursor functions not allowed during
Tracking updates is raised and then a program
crash. This did not happen at PDMS 11.5. The
error will now be trapped properly.
This was caused by a form with Tracking on
executing a cursor function from a button and
causing the system to become recursive.
Design
11.6.sp2
(8446)
Under certain circumstances, claims were being

lost, resulting in the following DICE error:
Element ATTACHMENT /name needs to be
marked in parent extract, as being claimed to this
extract in parent extract
11.6.sp2
(8448)
Crash in MyData corrected. It was caused by

adding an element to MyData in one session,
changing the elements name in another session,
and then savework, getwork in the first session.
Dice no longer hangs, when encountering a
particular severe corruption in the sessions of a
database.
11.6.sp2
(8465)
Dice now copes better with databases containing

lots of 406 errors.
Admin
11.6.sp2
(8476)
Switching names on two elements no longer

causes corruption if done twice in conjunction
with flushwithout.
11.6.sp2
(8479)
Dabacon error 41 on deleting an extract now

handled correctly
Admin
11.6.sp2
(8504)
Dice now handles extracts missing at the current Admin

location differently. Previously, a DICE check on
11.6.sp2
a level 2 extract might give an error 'Unable to
search index table in extract 3' because Extract 3
was non-propagating, and therefore not present at
the current location. This error is now treated like
the 'Lost bucket' error in a global project, which
outputs a warning about non-primary databases.
(8464)

User Bulletin
Module
Admin
11.6.sp2
11-27
*sp3*
This lists the most important corrections in Service Pack 3, at the time of
writing (April 2006). In some cases, these may also have been made
available in fix releases for previous versions of PDMS.
Reference
Description
Module
(3887)
The Extract claim hierarchy form has been

improved: among other things, it now indicates
when a claim exists at a lower hierarchy.
Design
11.6.sp3
(4658)
Corrected display of Bore in Query>attributes form

for mm Bore units setting.
Design
11.6.sp3
HPD 24740
(4759)
Improved DACs error handling in several places in

the GUI by using a new test rather than a dummy
move (BY E 0 mm).
Design
11.6.sp3
HPD 28023
(7292)
This resolves a problem with the GUI when adding

an ATTA to a cable tray which contains a MDS
support.
(4915)
(8939)
Spooler no longer changes the session units.

Output dimensions and MTO units in Isometric
preview in Spooler are now shown in the current
session units.
Spooler
11.6.sp3
HPD 26603
(5591)
Query>General has been added back due to

popular demand. This enables, for example, the
Querying of BOLT info for piping components.
Design
11.6.sp3
(5518)
Resolved an Unhandled Exception (Object

reference not set to an instance of an object) caused
by an UNDO after moving an object using the
locator handles and then deleting the 3D View.
Design
11.6.sp3
HPD 27480
(5807)
Data listing of DRWG improved. Problems occurred Draft

at a DPOINTS with DTOF. This was corrected
11.6.sp3
treating DPOIs like DPPTs, so that their critical
attribute (POS) is not initialised on creation.
HPD 20209
(6772)
A combination of ATTA, Sheet break, ATTA in a

particular sequence caused a dimensioning error.
HPD 30819
(8701)

User Bulletin
Isodraft
11.6.sp3
11-28
HPD 27992
(6850)
Query attributes at a SPEC, SPCO, SELE in

Paragon no longer gives an error.
Paragon
11.6.sp3
HPD 28432
Unnecessary rectangle no longer plotted for OLET

in certain circumstances.
Isodraft
11.6.sp3
Support (trunnion) dimension on elbow no longer

shows cut length rather than distance to elbows
P0.
Isodraft
11.6.sp3
HPD 77267
(7089)
Achieved a significant reduction in number of

database pages written on a Flush with Refresh.
This takes effect only on a such a Flush, when no
changes have been made in the parent extract.
General
11.6.sp3
(also
11.5.sp1.45)
HPD 28795
(7141)
Merge Changes did not correctly update pointers

between session pages, resulting in subsequent
flushing corrupting the Database. The command
EXTRACT FLUSH RESET also led to a Product
crash. These faults have now been corrected.
Admin
11.6.sp3
HPD 28871
(7199)
The presence in sequence of additional MTO

records caused welds attached to a support ATTA
to appear incorrectly in the weld report.
Isodraft
11.6.sp3
HPD 16673
(7314)
Resolved problems with the dimensioning of a skew Isodraft

box on a pipe that is modelled in a non-orthogonal
11.6.sp3
direction.
HPD 25281
(7268)
Resolved a problem modifying ACR GROUPS.
Admin
11.6.sp3
(7413)
The Design Pipework application (Modify Pipe

form) had a fault causing the options to be lost and
an error Array element 0 does not exist. This
forced the user to close the form and reopen it. This
has been corrected.
Design
11.6.sp3
(7786)
HPD 31108
Corrected a fault causing Utilities>Send Message

for a GLOBAL project to give an error '(61,680)
F&M: Cannot access column data for gadget
!!ADMMESS.LOCN, it is not multi-column'.
Admin
11.6.sp3
HPD 29892
(8020)
Corrected Iso Dimensions and Error message when

using user defined SKEY.
Isodraft
11.6.sp3
HPD 29954
(8047)
Corrected dimensioning in certain circumstances

around ATTA.
Isodraft
11.6.sp3
(6874)
HPD 28541
(7034)
(8812)

User Bulletin
11-29
HPD 29964
(8053)
HPD 30475
(8532)
Confusing layout of the HVAC modify form

corrected.
Design
11.6.sp3
HPD 30008
(8119)
Corrected dimensioning when using SPECBREAK

BRANCH around ATTA.
Isodraft
11.6.sp3
HPD 30026
(8144)
A combination of dotted lines and hangers caused

an incorrect dimension.
Isodraft
11.6.sp3
(8154)
Corrected an error with Design Explorer

navigating to an element and selecting Query >
Attributes
Design
11.6.sp3
(8186)
While creating ADP view with limits set to

drawlist, an error illegal values for attribute
VSCA appeared and the view was not generated.
Draft
11.6.sp3
(8214)
ATTEXT command now enables the addition of

extra text to the material list for tube as well as
fittings.
Isodraft
11.6.sp3
HPD 30171
(8320)
The Cutpiece number table did not match the

cutpiece numbers on the iso for split drawings.
This was becasue the bends had no SKEY set.
Isodraft
11.6.sp3
HPD 30009
(8327)
Field Weld labels were shifted to the next weld.

and Cut piece lengths after field welds were wrong,
when the welds were followed by a Tee.
Isodraft
11.6.sp3
HPD 30200
(8334),
HPD 31094
(8796)
New pipe creation form no longer lists wrong sizes

for inch bores.
Design
11.6.sp3
HPD 30195
(8335)
Splash error no longer given when the user selects

a menu entry and drags the cursor into the main
display.
Design
11.6.sp3
HPD 30231
(8374)
PZAXIS (& other axis attributes) may now be reset

to unset.
Paragon
11.6.sp3
Corrected dimensioning on isometrics with "dime

comp on" and Tolerance Offset 2mm :
Isodraft
11.6.sp3
HPD 30387
(8508)
HPD 30048
HPD 30254
(8401)

User Bulletin
11-30
(8402)
A form handling fault meant that manipulation of

a View gadget could cause another gadget to
reappear in an inactive state. The system now
ensures that a view's form is displayed before
allowing refresh of status line label widgets.
Design,
Paragon
11.6.sp3
HPD 30094
(8434)
Corrected GUI error in setting MTO length and

Quantity of Detail Text.
Paragon
11.6.sp3
HPD 30037
(8435)
PLINEs are now drawn and the filter works

correctly.
Design
11.6.sp2.1
(8494)
Corrected a problem causing a memory error to be

reported. This was caused by some databases in an
extract tree having been compacted, while others
hadn't.
DICE
11.6.sp3
(8496)
Lug SKEYs WLR and WLC are now user

definable.
Isodraft
11.6.sp3
HPD 30320
(8515)
AutoDRAFT will now work with AutoCAD 2004,

2005, 2006.
Draft
11.6.sp3
HPD 30350
(8521)
Translucent obstruction now works with holes on.
Design
11.6.sp3
HPD 30470
Background Process Manager did not run the jobs

for certain users/passwords, for example if the
username was only one character.
Draft
11.6.sp3
(8601)
HPD 31361
(8931)
(8595)
HPD 30393
(8529)
(8557)
(8869)
It has been updated and now also copes properly

with characters with an ASCII value less than 32.
Reselecting components out of spec in the Design
Pipework application, now works correctly.

User Bulletin
Design
11.6.sp3
11-31
HPD 30349
(8534)
(8855)
The 3D display has been corrected to show the

teeth of the section planes in the correct direction.
In the 3D view, the teeth indicate which side of the
plane the objects will be kept, and the display
changes when the user flips it.
Draft
11.6.sp3
The Planes are now shown on the 2D view at the

same time as the 3D view. In the 2D view, the
shaded area indicates where the plane itself is, and
does not change when the user switches between
'in front' and 'behind'.
HPD 30367
(8535)
PDMS no longer shuts down if Windows/Forms for

Explorer, Command Window and Drawlist are in
one set and moved together.
General
11.6.sp3
HPD 30485
(8538)
Improved display of the alert input form with long

text it no longer gets cut off.
General
11.6.sp3
(8544)
(8572)
Highlighting on ppoints (& plines) for picking, e.g.

if you use Q IDP @ when you select the item, was
not working, though there was feedback in the
prompt space for the ppoint passed over.
Design
11.6.sp3
HPD 30327
(8564)
Output in some Draft Admin forms has been

improved so that it no longer shows as an
exponential number.
Draft
11.6.sp3
HPD 30649
(8613)
SAVEWORK from the menu corrected to work for

Model Management projects with a missing default
file des-userdefinedhook.pmlmac.
Design
11.6.sp3
HPD 30074
(8615)
A floating window no longer causes PDMS to crash

on a machine with two screens.
Design
11.6.sp3
HPD 30730
(8664)
Corrected a WELD symbol error caused by the

sequence TUBE WELD, zero length BEND, TUBE.
Isodraft
11.6.sp3
HPD 30740
(8669)
Precision in Draft Admin increased.
Draft
11.6.sp3
HPD 30819
(8701)
General option added back to Query menu
Design
11.6.sp3
HPD 30019
(8702)
Bolt diameter units were incorrect in the material

list when Vessel/Equipment Trim is chosen.
Isodraft
11.6.sp3

User Bulletin
11-32
HPD 30852
(8745)
HPD 31127
(8808)
New Component Creation form no longer places a

90 degree elbow in place of a 45 deg one.
Design
11.6.sp3
HPD 30234
(8754)
Corrected errors with reference dimensions at the

mid point of a tee.
Isodraft
11.6.sp3
HPD 31124
(8787)
Corrected error in Merge Changes handling of

Table pages that caused DICE errors or a crash in
an extract hierarchy.
General
11.6.sp3
HPD 31125
(8790)
Corrected fault causing Reconfigurer to crash with

kerror 41.
General
11.6.sp3
HPD 31132
(8805)
Corrected a fault that caused a crash when

deleting a DPSE under a ZONE.
Design
11.6.sp3
HPD 30984
(8838)
Corrected a fault causing partnumbers to be

missed from the drawing they were on the
material list. This was traced to the fact that
Spooler gave new part numbers to components
across Branches, but Isodraft did not consolidate
them when outputting part numbers FROMDB.
Isodraft
11.6.sp3
HPD 31174
(8840)
Resolved a fault causing a SPLASH error message

when running a piping system isometric.
Isodraft
11.6.sp3
HPD 31076
(8842)
Can now use the GUI to modify the origin of a piece Design
of equipment when using Ppoints On, Numbers
11.6.sp3
Settings.
HPD 31187
(8844)
The Purpose field on the Create Site form now

shows the correct data.
Design
11.6.sp3
(8848)
In Annotation Modify Mode, the box can no longer

be resized to make the size smaller than the
minimum permitted view size.
Draft
11.6.sp3

User Bulletin
11-33
(8849)
Various improvements to the operation of the

Viewfinder and 3D view:
Draft
11.6.sp3
(1) The 3D view always does reflect the VIEW

direction. There is now an extra option on
viewfinder menu to 'look through' view finder
(same as on 3D view popup menu), which may help
user to orientate himself.
(2) The OK button on the modify view form now
updates the 3D view graphics.
(3) On UNDO the system now issues an alert if
UPDATE DESI required.
(4) There is a new option on the orientation menu
to reset the angle to zero.
(5) Moving the view frame with the secondary
mouse button & selecting cancel now clears the 2D
view temporary graphics.
(6) Resize hotspots are now be cleared for a new
view.
HPD 29872
(8867)
Isodraft no longer creates a slope arrow with the

wrong slope direction (where the start/end of a
tapped fitted branch was incorrectly treated as if it
is on the main pipe).
Isodraft
11.6.sp3
(8871)
The Equipment application utility to control

graphical navigation (selecting Equipment, Subequipment or Primitive) did not work at 11.6 and
has been changed so that it works better:
Design
11.6.sp3
The toolbar Navigate button is now a toggle:

On allows equipment and primitive level picking
using EDG as before
Off means that Model Editor mode is used.
The Model Editor mode button is inactive when in
any EDG mode.
HPD 30916
(8876)
Unpinned docked windows are no longer animated:

they now appear and disappear instead of sliding
back and forth.

User Bulletin
Design
11.6.sp3
11-34
HPD 31216
(8890)
The Dimension line for the Valve was incorrectly

extended to include a connected Flange. (Flange
was
Isodraft
11.6.sp3
MTOC OFF MTOC DOTU MTOC DOTD the

flanges, gaskets and valve were all SHOP FALSE.)
AID text now has a background colour to make it
more easily visible, especially on point clouds.
Design
11.6.sp3
HPD 31252
(8897)
A long piece of pipe was incorrectly split in two in

the MATC file under certain circumstances.
Isodraft
11.6.sp3
(8909)
Flush can now handle elements in secondary lists

which no longer exist.
Design
11.6.sp3
HPD 31351
(8920)
Spool number was missing at a bypass.
Isodraft
11.6.sp3
HPD 30657
(8932)
Spool numbers greater than 99 are now handled.
Isodraft
11.6.sp3
HPD 31213
(8949)
Corrected a fault causing a 'twisted' pipe drawing

with the option FALLSKEW TWODBOX ON.
Isodraft
11.6.sp3
HPD 31405
(8952)
When showing existing pipe by setting the MTOC,

MTOH and MTOT attributes of the existing
components and/or branches to DOTD, spool
numbers are no longer shown for these items.
Isodraft
11.6.sp3
HPD 31401
(8955)
The OUTC command now displays a REAL UDA

correctly according to its settings.
Isodraft
11.6.sp3
HPD 31439
(8965)
Corrected the bend curvature appearance on the

drawing isometric. (This was the first bend in a
spool drawing, right after a flange.)
Isodraft
11.6.sp3
HPD 31448
(8974)
The Draft GUI will now output the results of

queries more accurately.
Draft
11.6.sp3
(8976)
Corrected a spatial map inconsistency error shown

by DICE after a merge. This could result in a
Dabacon error 534 in DESIGN
General
11.6.sp3
HPD 31489
(9001)
Corrected an error in composite dimensions when

insulation is set for a zero length pulled bend
which is followed immediately by a Tee in-leg.
Isodraft
11.6.sp3
(9008)
Speed improvement when adding a large XGEOM

to the Design Explorer.
Design
11.6.sp3

User Bulletin
11-35
HPD 31554
(9021)
Report template width field extended.
Design
11.6.sp3
HPD 31611
(9061)
Corrected a crash caused by a catalogue item

having more than 100 visible ppoints.
Design
11.6.sp3
HPD 31658
(9062)
Corrected a missing item number on Iso for an

instrument that should be marked correctly with
both item number and the name of the item
(because of an OUTCOM element).
Isodraft
11.6.sp3
HPD 31463
(9065)
The drawing of Venturi (PCOM with SKEY based

on SGPL) with 3 offline legs has been improved.
Isodraft
11.6.sp3
Currently, Isodraft restricts the number of tapping

points on a PCOM to 3 2 end points and 1 middle
point. If a tapping is not close to the centre, it is
pushed to the nearest end this tolerance has been
relaxed but users are advised to place the middle
tappings as close to the centre as possible.
(9073)
Performance improved - deletion of many table

entries no longer causes empty database pages.
General
11.6.sp3
(9083)
Improved SaveWork speed by reducing the

dynamic memory allocated.
General
11.6.sp3
HPD 31711
(9091)
Corrected dimensional errors on branches.
Isodraft
11.6.sp3
HPD 31743
(9092)
Corrected an error causing file write locks to be left

when a flush generated error.
General
11.6.sp3
HPD 31744
(9095)
Corrected an error causing a name clash not being

detected on Flush.
General
11.6.sp3
HPD 31687
(9097)
Corrected a Dimension problem with set-on tees

with no spool the dimension was from the HPOS
instead from the centre line of the main branch.
Isodraft
11.6.sp3
HPD 31763
(9104)
The number of welds at LUGs has been corrected.
Spooler
11.6.sp3
HPD 31859
(9131)
Corrected the replicate macro so that it does not

Admin
insert a $ at the end of a long line as a continuation 11.6.sp3
in the middle of a text string.
HPD 31901
(9161)
Corrected a crash when setting attributes to rules.

User Bulletin
Design
11.6.sp3
11-36
HPD 31902
(9164)
Corrected a crash when navigating to Draft

elements in Design.
Design
11.6.sp3
(9219)
Corrected a crash when making a relative move

(BY) using Positioning Control (Graphics option)
and picking the "marker" cone at the branch TAIL.
Design
11.6.sp3
(9236)
Corrected viewfinder operations to prevent an error Draft

message Variable!!DRA3DVIEWSECTIONS does
11.6.sp3
not exist.
HPD 32018
(9259)
Fixed error querying attributes of SCOM, or using

Show Attribute).

User Bulletin
Paragon
11.6.sp3
11-37
*sp4*
This lists the most important corrections in Service Pack 4, at the time of writing
(January 2007). Please note that the list is not complete; some other internally
reported issues have also been corrected.
Reference
Description
(1071)
Modifying a hanger with a locked element used to H&S

delete the other elements. The application now
verifies whether the hanger or its elements are
locked before deletion.
(1116)
Error handling improved for creation of hanger.
H&S
(1117)
Clear Aid function improved; options provided:

Remove Axes & Remove All (Axes, Lines & Text).
H&S
(1156)
Modify > Fill menu option at BRANCH level

improved.
DESIGN
Cable Trays
Improved user interface for modifying branch

specification.
DESIGN
Cable Trays
No longer gives variable not defined error

message on creation of stanchion of E type wicket
gate with no cross member.
DESIGN
H&S
(1170)
(1338)
Module
(1410)
No longer gives warning message Form

CLCLACHK too large for screen.
DESIGN
(1876)
User interface layout corrections.
ROUTER
(2158, 2275,
2309, 2579,
2606, 7594,
8583, 9137)
Various corrections and improvements to user

interface.
ADMIN
(2300)
Insulation no longer displayed in mm when using

in Imperial units.
HVAC
(2308)
Description field now accepts text in single

quotes.
ADMIN
(2768)
The user is prompted to enter a positive value for

scale-up factor for DXF/DGN output.
DRAFT
HPD 16691
Correction of various errors related to the use of
DESIGN

User Bulletin
11-38
Reference
Description
Module
(3342)
Imperial (English) units.
H&S
(3414)
The current project name is no longer shown in

the Foreign Projects section of the Include
Foreign database form.
ADMIN
(3450)
Error message is now given if a user attempts to

modify an element deleted by another user.
DESIGN
(3457)
The Filter option now works correctly on the in

the DB set selection form.
ADMIN
(3474)
Saved template file is now correctly deleted in

PDMSUSER by Utilities>Export>Delete.
DESIGN
GENERAL
(3450)
The system no longer fails to display an error

message to a user working on a Multi-write DB
with implicit claim, when attempting to modify
an element that has been deleted by another.
DESIGN
(3500)
An error is now shown when attempting to

position an object without specifying the
direction.
DESIGN
HVAC
(3505)
Duplicate name error handled when Setting

configuration for tube hanger.
DESIGN
HPD 19210
(3534)
Create > Support > Template item added to the

Create Support menu.
DESIGN
H&S
(3575)
The Filter option has been corrected.
ADMIN
(3581)
Admin Elements form operation has been

ADMIN
improved when changing the type of element. The
Filter and Sort by selector are updated and
buttons grayed out or activated as appropriate.
(3676, 9366)
User interface corrections mean that correct

Form Data is now shown when modifying a
DATA Element and that string properties can be
defined.
PARAGON
(4842)
Project>Expunge>Claimlist... in ADMIN now

shows correct display list of multiwrite
databases.
ADMIN
(5240)
The performance of picking is much improved. In

particular, the time to dimension (LDIM and
ADIM) and label (GLAB) has been speeded up.
DRAFT

User Bulletin
11-39
Reference
Description
Module
(5432)
Right click menu is now correctly displayed in

DGN General.
DRAFT
(6672)
View scale is no longer shown as a decimal on

DRAFT 3D View.
DRAFT
HPD 25077
(6705)
Flow arrows on Trunnions may now be prevented

by using the new 'OFF' setting for the 'FLOW'
attribute of BRANCH.
ISODRAFT
HPD 28322
(6842)
Corrects fatal error in Isodraw when drawing 4

PCOMs with SKEY UNIV due to lack of space
for the symbols.
ISODRAFT
HPD 28432
(6874)
Corrected Rectangle shape being shown for OLET

ISODRAFT
(Skey:WTBW),
HPD 16192
(6947)
A valve with a user defined SKEY caused

misplaced dimension line and instrument text to
be drawn outside the balloon.
ISODRAFT
HPD 18377
(6958)
Corrected dimension near skewed elbow.
ISODRAFT
HPD 28754
(7070)
Corrected support dimension.
ISODRAFT
HPD 28727
(7073)
Corrected SPLASH error when drawing certain

supports.
ISODRAFT
(7076)
Settings > Defaults > Main option is now more

robust.
H&S
(7087)
Modify > Hanger > Attributes prompts the user

to select the hanger. If the user then presses the
<Esc> key the Position form is now [properly
cleared.
H&S
HPD 26368
(7124)
Corrected a fault causing welds to be shown as

Shop for Site caps.
ISODRAFT
(7523)
Project field on Entry form is now checked for

valid input.
ADMIN
(7554)
Main menu option Display > Drawlist form could

cause Syntax Errors. These have been corrected.
SPOOLER
(7562)
Invalid section splitting no longer causes PML

Error message.
Design
Structural

User Bulletin
11-40
Reference
Description
Module
(7593)
Up or Down arrow no longer pops up error in

Create Date Stamp
ADMIN
(7778)
Radio gadget callback no longer repeated after

alert in certain circumstances.
GENERAL
(7861)
Several improvements to layout and usability of

the user interface.
DRAFT
(7894)
System will no longer crash when attempting to

rotate a selection that has been deleted!
DESIGN
HPD 29540
(7907)
Pipe Bore in the Title-block is no longer shown in

feet and inches for a Pipe of bore 24" and above.
ISODRAFT
(8182)
Error cannot create SLAB at this level no

longer given while creating SLAB.
DRAFT
MDS Trunnion offset is shown wrongly on Iso.
ISODRAFT
(8243)
Remove from View option in 3D view no longer

gives error Variable IDlist does not exist.
DRAFT
HPD 30141
(8259)
Corrected problems with z direction for

instrument connections on sloped lines.
ISODRAFT
(8582)
The Utilities definition form now checks the

description better.
DESIGN
HVAC
(8607)
User Interface improvements.
DESIGN
H&S
(8608, 9390,
9406)
User Interface improvements.
ROUTER
(8870)
Quick Pipe Routing Insulated pipe handled

better.
DESIGN
(8889)
Error message now displayed correctly when

dragging from Explorer to 3D view.
DESIGN
HPD 31258
(8956)
ISODRAFT no longer gives minor discrepancies

in dimensions for certain options.
ISODRAFT
HPD 31439
(8965)
Bend curvature is no longer in the wrong

direction on the isometric.
ISODRAFT
HPD 31509
(8996)
HPD 31508
Dragging a FRMW into the 3D view will no

longer add the owning STRU to the 3D or 2D
draw list.
DRAFT
HPD 30020
(8203)

User Bulletin
11-41
Reference
Description
Module
(9018)
Longer database names (up to 93 characters) can

now be used in the CNAME operation; the
system will output an appropriate error message
when attempting to use a longer name.
ADMIN
HPD 31551
(9022)
(10149)
It is now possible to run cursor functions

(including VAR !pick) from a blocking form in
certain cases. This is to resolve an issue with a
PML form that worked at PDMS 11.5 but used to
hang the system at 11.6.
This is a blocking form that requests a VAR !p
PICK sub-mode on the OK button. At PDMS
11.6.sp3, when the user clicks the OK button, the
form stays displayed; the user is unable to make
a pick, as the blocking form is preventing it. The
form is now removed and the user can perform
the pick.
Please note that blocking forms can lead to poor
(demand driven) user interfaces. It is
recommended that they be used only to force the
user to provide data for which there are no
defaults. An alternative might be to have a nonblocking form managing the task; this would
allow the display of a blocking form to acquire
critical data and would also control access to
graphical picking.
DESIGN
11.6.sp4
HPD 31676
(9070)
Corrected an error in the number of Spools.
ISODRAFT
HPD 31780
(9106)
Corrected SPLASH error in Isodraft Mode.
DESIGN
HPD 31808
(9135)
Deletion of a DB no longer rearranges the sort

order.
ADMIN
HPD 32588
(9140, 9445)
No longer gives erroneous Dabacon error 516

after flush error.
(9180)
No longer gives unwanted message Can't convert DRAFT

string to Db Ref from Change Representation
Rules form.
HPD 32010
Performance improvements for graphical picking;

no longer highlights incorrect item. Explorer
(8997)

User Bulletin
ALL
DESIGN
11-42
Reference
Description
(9223)
performance improvements.
HPD 32067
(9252)
Weld is no longer missing on iso when a reference

dimension is attached to the welded elbow. (Weld
table was already OK.)
ISODRAFT
HPD 32077
(9257)
Increased limits that caused Error in SPLASH

routine HGETS1 Area: Handling when drawing
very complex isometric.
ISODRAFT
HPD 32172
(9306)
Corrected a fault causing Splash error 9 on a

particular Spool Iso with OLETs.
ISODRAFT
HPD 32190
(9313)
Corrected a crash when a reducing flange was

followed by lap joint.
ISODRAFT
HPD 32211
(9324)
Corrected a warning about gadget placement in

the PML Browser form.
GENERAL
HPD 32178
(9327)
Corrected an error in overall dimensions in an

almost vertical line with the use of the zero
length skew option.
ISODRAFT
(9343)
Now navigates correctly to the element in the

navigation bar of the names form when using
main menu Modify > View > Local Rules.
DRAFT
(9345)
Corrections to several User Interface layout

faults, giving improved usability.
DRAFT
HPD 32286
(9353)
Corrected a fault causing tube to be shown

between mating flanges.
(9357)
The Modify tool bar button is no longer greyed

DESIGN
out if the escape key is pressed to exit EDG mode.
HPD 32362
(9369)
Textpane text limit increased by handling in a

different way.
DESIGN
HPD 32322
(9371)
Part numbers on iso no longer duplicated.
SPOOLER
(9376)
Supplied pdms.bat & evars.bat files revised to

remove references to FD versions of projects.
General
HPD 31250
(9379)
Calculation of skew angles on Isometric drawing

now matches better with the 3D view.
ISODRAFT
HPD 32365
(9393)
Branch is now plotted in the correct direction

when zero long components are at the pipe head.
ISODRAFT

User Bulletin
Module
ISODRAFT
11-43
Reference
Description
Module
(9394)
An element is created, stored using SAVEWORK

and then deleted, followed a QUIT operation
This used to leave the element in a state where
'Delete' and 'Rename' are greyed out on the popup menu in the Explorer, but is now corrected.
DESIGN
HPD 32476
(9408)
(9419)
A fault causing an error for a large name table (4

levels) when deleting pages.
Correction also made to table page splitting.
DABACON
HPD 32482
(9412)
Reference dimension no longer shown twice.
ISODRAFT
(9417)
Model manager menu not shown under Design

Utilities.
DESIGN
HPD 32514
(9420)
No longer crashes for certain combinations of

flanges & lap joints.
ISODRAFT
HPD 32603
(9451)
<space> can now be used instead of mouse click

for current focus position.
DESIGN
(9464)
User interface correction to prevent syntax error

while creating Working Extracts.
(9470)
Automatic Continuous Clash Detection

(AUTOCLASH) was failing to report clashes after
encountering an error: this has now been
corrected. This could occur, for example, when
checking a badly routed pipe. On Demand Clash
Detection was not affected.
ADMIN
DESIGN
(9494)
Extract Control no longer gives PML Error when

CE is World.
DESIGN
HPD 32449
(9510)
Iso legibility improved for certain configuration

so that dimension and text are not overlaid.
ISODRAFT
HPD 32749
(9512)
Straight line no longer broken into segments with

ISODRAFT
different slopes.
HPD 32763
(9521)
Corrected missing weld numbers on spool iso.
HPD 32832
(9548)
User interface corrected to remove message about ADMIN

Variable !!CHECKNOUPD on use of Update
Event Form.
HPD 32927
Corrected dimension error caused by combination

User Bulletin
ISODRAFT
ISODRAFT
11-44
Reference
Description
(9567)
of Flow Arrow, Composite dimension & Support.
HPD 32928
(9568)
Pipe Cut length number no longer wrongly

displayed along a pipe when material output is
switched off.
HPD 32899
(9584)
Part numbers for Reducers now shown and the

material list collected correctly.
HPD 32949,
HPD 33088,
HPD 33258
(9591, 9610,
9740)
New facility added to show weights and totals on

isometrics. Please see section 4.7.
ISODRAFT
HPD 32975
(9593)
Corrected a fault causing the branch order

around ATTAs to be reordered when moving
components with the model editor.
DESIGN
HPD 31504
(9597)
Dimension of support to field weld of flange now

ISODRAFT
shown when flange attribute MTOC set to DOTU.
HPD 33068
(9607)
IWELD for LUG is no longer missing in spool

drawing.
SPOOLER
HPD 33093
(9611)
Corrected OLET/PIPE misalignment on spool iso.
ISODRAFT
HPD 33139
(9623)
Unwanted skew no longer appears at a particular

bend configuration.
ISODRAFT
HPD 33170
(9639)
Primitives with translucent obstruction now

shown in correct position.
DESIGN
HPD 33312
(9652)
Performance improved for modification of SDTE

with a large number of detail texts.
PARAGON
HPD 33195
(9665)
Errors with multi-write databases corrected

these were sometimes caused by deletion of Draft
objects and UNDO.
DRAFT
HPD 33344
(9676)
Corrected a crash caused by use of DACs when

using MDS.
DESIGN
MDS
(9695)
Corrected Array bounds error in VLDMRC - IA(0)
ISODRAW
HPD 33657
(9772)
Corrected the coordinates on the iso around

particular configuration of ELBO used by MDS.
ISODRAFT
HPD 33804
Can now successfully use EDG to pick D-Points
GENERAL

User Bulletin
Module
ISODRAFT
ISODRAFT
11-45
Reference
Description
(9777)
under XGEOM
(9781)
Explorer no longer fails to load if there are no

members.
Module
SPOOLER
(9787)
Database error 41 no longer occurs when

hovering over the view frame in the 3D view.
DRAFT
(9902)
Can now re-enter H&S after using File>Save

option from Application Defaults form.
DESIGN
H&S
11.6.1 Corrections to Global 2.4.SP1 (issued with PDMS 11.6.sp4)

Reference
Description
Module
(0940)
Corrected a crash when using REPLICATE at a

satellite
Global
HPD 33318
(9328, 9926)
Corrected an error while creating update event at

satellite location.
Global
(9391)
Copy command text from Transaction messages

form
Global
(9452)
Fixes to Global 2.4 file-copy functionality

(Suppress spurious errors)
Global
(9555)
Restore lost Remote Session methods (Access to

these is fairly obscure, via PML Location objects)
Global

User Bulletin
11-46
*sp5*
This lists the most important corrections in Service Pack 5, at the time of writing
(October 2008). Please note that the list is not complete; some other internally
reported issues have also been corrected. The list includes points that affect only
Global projects.
Corrections made at PDMS 11.6.SP5:
Incident
number
Defect
number
Description
Module
HPD 37648
P-10276
(11709)
Corrected output of Simplified Chinese characters in

MATL (material list) file with mixed English/Chinese text.
This file now matches the (correct) output of the material
information on the Isometric.
However, the MATC file still outputs a coded description.
Isodraft
HPD 27771
P-9186
(6673)
Correct symbol now shown on reducer continuation
Isodraft
HPD 35622
P-10271
(11695)
SQL-Direct did not work at PDMS11.6.SP3 or 4.
SQL-Direct
HPD 36807
P-10230
(11632)
Background Process Manager was failing with some

passwords
Draft BPM
HPD 37174
P-10260
(11678)
Now correctly selects component from alternate spec,

rather the branch spec.
Design
P-7716
Improvements to the handling of Asian characters to

prevent spurious messages: error (2,792) Cannot assign to
attribute.
Design
P-8109
Improvements to the handling of Asian characters to

prevent spurious messages: (2,109) Undefined name
Design
HPD 37796
P-10368
Japanese Shift-JIS DXF file no longer has errors in certain

characters codes. Please note that updated AutoCAD font
files should also be used these are available separately.
Draft
HPD 37890
P-10291
(11729)
Corrections have been made to Reconfigurer to prevent

certain cases of database corruption
Admin
HPD 36107
P-10181
(11540)
Changing Lvisibility from true to false, when you have

multiple views on a sheet with all the view frames are
turned on, no longer causes the view to disappear
Draft
HPD 38119
P-10451
Bad Skewbox dimensioning
Isodraft
HPD 38200
P-10452
Material control files in error
Isodraft
HPD 38120
P-10468
Spurious length of pipe and bad Skewbox triangle
Isodraft
HPD 32183
P-10607
No status flag error
Isodraft
HPD 34955
P-10608
Wrong dimension and wrong representation on isometric.
Isodraft
HPD 35321
P-10609
Check valve dimension is wrong on isometric
Isodraft

User Bulletin
11-47
Incident
number
Defect
number
Description
Module
HPD 35905
P-10610
Duplicate part numbers for tubi connected to seton
Isodraft
HPD 36110
P-10611
Weld Numbering Error
Isodraft
HPD 36484
P-10620
Wrong dimensions on pipe legs with olets
Isodraft
HPD 36585
P-10621
Problem using weld for small slopes an pipes
Isodraft
HPD 36969
P-10622
Isodraft produces an FATAL ERROR while processing
Isodraft
HPD 34236
P-10623
Missing Bends in Part List
Isodraft
HPD 37298
P-10624
Connections to 6-way components do not always show

correctly
Isodraft
HPD 37347
P-10625
Spooler deletes the WLDGRP or JNTGRP
Isodraft
HPD 37612
P-10626
Iso not up to date
Isodraft
HPD 37060
P-10627
IWELD not shown on SPLDRG
Isodraft
HPD 32183
P-10607
Isodraft
HDP 37836
P-10289
Partno 2 is shown in Part List but not on the Iso
Isodraft
HPD 37171
P-10301
A fatal error has occurred in ISODRAW
Isodraft
HPD 38347
P-10333
dimension line of overall length points to wrong p
Isodraft
HPD 34769
P-10085
Incorrect bore value shown on Iso
Isodraft
HPD 38668
P-11708
Tube numbering problem for Pulled Bends with no leave

tube
Spooler
P-11709
IWELD created when COCO not defined
Spooler
HPD 38179
P-11743
Bolt part numbers incorrectly consolidated by Gateway
Isodraft
HPD 38638
P-11820
Bolting problems with Isodraft equipment detailing
Isodraft
HPD 38849
P-11920
We have a problem with numbering if after the spool

break are (support) ATTAs
Spooler
11.7.1 Corrections consolidated from previous fix releases:

Incident
number
Defect
number
Description
Fix
Version
DFN03777
Centreline lengths calculated incorrectly for Imperial

lengths
12
DFN07469
Error maintaining branch count when pipe contains

pslists
12
HPD 31255
DFN08906
The dimension to a welded attachment is incorrect
12
HPD 32183
DFN09310
12

User Bulletin
11-48
DFN09492
fix for preventing the router menu showing if router

appware is not installed.
12
HPD 34955
DFN10449
Wrong dimension and wrong representation on isometric
12
HPD 35321
DFN10667
Check valve dimension is wrong
12
HPD 35905
DFN11458
Create IWELD for Seton TEEs
12
HPD 36110
DFN11550
Weld Numbering Error.
12
HPD 36484
DFN11592
Wrong dimensions on pipe legs with olets
12
HPD 36490
DFN11597
Same dimension appears twice.
12
HPD 36585
DFN11611
Problem using welds for small slopes on pipes
12
HPD 36613
DFN11615
Issue with dimensions on isometric
12
HPD 36969
DFN11651
Isodraft produces an FATAL ERROR while processing
12
HPD 37002
DFN11662
Number FTUB with SKEY of TUBE
12
HPD 34236
DFN11667
Number Pipe with different Specs distinctly
12
HPD 36903
DFN11673
Reposition at component after FROMSPCOM command
12
HPD 36538
DFN11683
Error reporting WBORE of an IWELD
12
HPD 37298
DFN11693
Connections to 6-way components do not always show

correctly
12
HPD 37347
DFN11702
Only remove or copy the Weld or Joint group being

created
12
HPD 37512
DFN11705
Incorrectly positioned continuation text
12
HPD 37612
DFN11710
SPOOL_ERROR_INTERNAL when Gasket first element

of Spool drawing
12
HPD 37060
DFN11725
Do not create Welds at ATTAs even if SPKBRK is True
12
HPD 37836
DFN11727
Treat MTOC values of DOTD and DOTU as OFF
12
HPD 35876
DFN11434
Incorrect CofG when SCTN on a Template joint is

queried using command line
11
P-4417
DRAFT entry time too long (11.6)
P-4419
Plines & memberlines sometimes truncated rather than

drawn to node point (11.6)
DFN11403
Fix bug in db5_flush which was leaving stacks when

error 573 was generated
DFN11391
Fix bug in db5_flush which was leaving stacks when

error 573 was generated
P-4372
PipeCheckAddin can cause delays exiting design

(Additional performance enhancement)
HPD 36348
DFN11587
SCTN with profile of cone crashes PDMS
DFN9293
Inter-DB macros for deleted DB

User Bulletin
11-49
DFN11640
Extract Flush Reset crashes remote daemon
DFN11635
UPDATE command does nothing in certain network

configurations
DFN2128
Secondary merge causes update failures due to

prevention of reverse propagation
P-4315
Prevent potential problem with endpoints in file-copy

after ADMNEW check
P-4319
Undefined variables affecting REMOTE MERGE for

Transaction db
P-4316
REMOTE MERGE will stall not fail if error creating

operations
P-4408
Undefined variable caused SYNCHR ALL error
DFN11122
ADMIN crash in Q REMOTE
P-4321
SORTALLOCATE wrong in RELEASE version
DUN642
PML encryption
DFN11434
SCTN CofG error on Template joints.
DFN9713
Volume calculation on structures with TMPL. 09/01/08
HPD 28734
DFN07931
Control whether dimension value appears in/above

dimension line
HPD 33734
DFN09793
Insertion of missing horizontal lines in some tables
HPD 36076
DFN11541
Set Search Within constraint
HPD 36069
DFN11549
Fixed Length Tube Weights
HPD 36563
DFN11604
Eccentric reducer symbol at sheet break error
HPD 36284
DFN11613
Dimensions Composite
HPD 36701
DFN11625
Last ATTA co-incident with WELD
HPD 36891
DFN11643
error (61,567) F&M: Cannot find required field

!!SPLASBUILT in list/menu
HPD 36884
DFN11650
Incorrect Continuation Comment when Field Weld not

included in Spool Drawing
DUN0747
SKEY enhancements
DUN0757
Improved Continuation Sheet Functionality
DFN8502
Unhandled Dab538 in DICE
HPD 33482
DFN10456
Cannot dimension ppoint of template
HPD 35192
DFN10625
run error and crash when using add to drawlist con
HPD 34452
DFN10260
Error in SPLASH routine
HPD 34993
DFN10486
Separate Tube Weight Conversion Factor
HPD 35201
DFN10757
Weights are too close to column border
HPD 35848
DFN11366
ERROR in SPLASH routine
HPD 35905
DFN11458
Part Numbers distinct across Branches

User Bulletin
11-50
HPD 36046
DFN11528
Wrong display of tracing (visible when turned off)
HPD 36076
DFN11541
Set Search Within constraint
HPD 36069
DFN11549
Fixed Length Tube Weights
HPD 36362
DFN11578
Incorrect Continuation Comment when Field Weld added
HPD 36278
DFN11581
Missing Weights for MTOREF Items
HPD 36497
DFN11596
atta showing as bend
DFN11610
The fix is to make the Model Management menu entry

available in Spooler.
HPD 36076
DFN11541
Unhandled Exception error when using spooler > Cope

better with Spools that contain more than 500 item
HPD 35015
DFN10459
Valve dimension is wrong.
HPD 35201
DFN10757
Weights are too close to column border
HPD 35736
DFN11130
Problem with Elbow angle when the first digit after the
decimal is a 0
HPD 26805
DFN7121
Split atta causes wrong dimensions
DFN10905
Zillions of lines of "DRAWING INSIDE TITLE BLOCK"
HPD 35079
DFN10619
PDMS Model Editor Error when I use at ATTA.
HPD 35111
DFN10533
Specon destroys CATA DB. Problem with long member

list.
DFN10622
Data changed on UDA not saved with SAVEWORK (if

last dynamic attribute on already created element)
HPD 34969
DFN10752
PDMS116SP4 takes 5 minutes or more to exit (and

Splash crash fix)
DFN9621
Fix for Splash crashes on module switch
HPD 35408
DFN10470
Re-introduce bottom scroll bar on forms. Modification to

discourage users from killing the PDMS console window.
HPD 35604
DFN10996
Clashes not being reported when either CLEARANCE or

TOUCH GAP values are non-zero.
HPD 35230
DFN11277
Modification to discourage users from killing the PDMS

console window.
HPD 32322
DFN9371
On the right tee you see part number 3 and part number
6 for the tee
HPD 33981
DFN9958
Wrong dimension 1453 on isometric plot
HPD 33984
DFN9975
Continuation notes are wrongly positioned on olets
HPD 34169
DFN10131
Weld number is shown in middle of pipe where there

isn't any weld
HPD 34219
DFN10151
Overall dimension is missing on isometric plot
HPD 34927
DFN10422
Overall dimension on isometric is wrong

User Bulletin
11-51
HPD 34668
DFN10329
Pipe and Cable Trays Not Clashing Correctly
HPD 33873
DFN10442
PDMS crashes on 0mm long SCTN
HPD 34833
DFN10376
change des.dll to delayload udnet.dll and sgl5net.
HPD 34554
DFN10303
Bolting query causes crash in Design after entering &

exiting from ISODRAFTMODE
11.7.2 Corrections to Global 2.5 (issued with PDMS 11.6.SP5)

Incident
number
Defect
number
Description
HPD 37152
P-10454
TRANSFER doesnt copy GLOBAL db
Global
HPD 37069
P-10455
TRANSFER and Inter-db macros
Global
P-10456
TRANSFER corrupts System db
Global
P-10457
TRANSFER TO should remove HUB macros from satellite

Transfer folder
Global
P-10458
TRANSFER FROM apparently copying dbs from local

folder, not Transfer folder
Global
P-10459
TRANSFER FROM leaves ADMIN user in Transfer Global

db, not that for local Project
Global
P-10460
TRANSFER FROM may corrupt another satellite system

db at offline satellite
Global
P-11455
TRANSFER FROM keeps re-importing macro for deleted

db
Global
P-11309
Misc db not updated correctly
Global
P-10667
TRANSFER needs FORCE PROPG option
Global
P-11475
REPLICATE SYSTEM STANDALONE problem with

/*GRO
Global
P-11524
BUCKET renamed REFBLOCKS
Global
P-11525
REMOTE MERGE synonym GLOBAL MERGE
Global
P-11526
Copy Overwrite reworded
Global
P-6896
Allocate - handle deleted location
Global
HPD 38385
P-11575
CHANGE ACCESS crash (Deleted user)
Global
HPD 33573
P-11576
Reverse Propagation after Generate
Global
P-10515
Resetting project to Offline
Global
P-9274
Replicate System Satellite errors
Global
P-11527
Copy from Foreign loses Picture-file
Global
P-10666
GLBADMIN test crash (GENERATE LOC)
Global
P-10665
GENERATE - Initialise Merge timer to unset
Global
P-11522
Transaction messages - width of refs for Save-to-file
Global
HPD 26298

User Bulletin
11-52

PDMS Bulletin116sp5

Uploaded by

Copyright:

Available Formats

PDMS Bulletin116sp5

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PDMS Bulletin116sp5

Uploaded by

Copyright:

Available Formats

What is the purpose of this document?

What is the purpose of this document?

What versions of the software does this document cover?

What versions of the software does this document cover?

PDMS

This manual provides documentation relating to products to which you may

Copyright 1974 through 2008 AVEVA Solutions Limited

The software programs described in this document are confidential

VANTAGE PDMS Version 11.6.SP5

Final draft for PDMS 11.6.0

Final amendments for PDMS 11.6.SP1 marked *sp1*

Amendments for PDMS 11.6.SP2 marked *sp2*

Amendments & additions for defects

Amendments for PDMS 11.6.SP3 marked *sp3*.

Amendments for PDMS 11.6.SP4 marked *sp4*.

Pipe bending checks & pipe sketches

Query Global Network status from all modules

VANTAGE PDMS Version 11.6.SP5

Overview .................................................................................................................... 1-1

PDMS GUI General changes .....................................................................2-1

Glossary ..................................................................................................................... 2-1

VANTAGE PDMS Version 11.6.SP5

2.4.1 History .............................................................................................................. 2-5

PDMS Design Changes ................................................................................3-1

General GUI improvements ..................................................................................... 3-1

VANTAGE PDMS 11.6.SP5

Piping Isometric Enhancements .................................................................4-1

General GUI improvements ..................................................................................... 4-1

Drawing Production Enhancements ...........................................................5-1

General GUI improvements ..................................................................................... 5-1

VANTAGE PDMS 11.6.SP5

Background processes ............................................................................................. 5-13

Parameterised Property Attributes .............................................................6-1

Admin enhancements for Global.................................................................7-1

Querying Remote databases *sp4*........................................................................ 7-1

Application switching................................................................................................ 8-1

VANTAGE PDMS 11.6.SP5

Incompatible PML changes..........................................................................9-1

Summary ................................................................................................................... 9-1

Updates to standard projects ....................................................................10-1

10.1 Supports catalogue for MDS *sp4* ..................................................................... 10-1

Product Faults and User Requests ...........................................................11-1

11.1 Known faults and Outstanding Issues................................................................... 11-1

VANTAGE PDMS 11.6.SP5

VANTAGE PDMS 11.6.SP5

Use of the latest Microsoft .NET technology to provide Windows

A simpler mechanism for the various add-in applications for DESIGN,

Extension of the new Model Editor, introduced at PDMS 11.5, and

VANTAGE PDMS Version 11.6.SP5

A new GUI for DRAFT, including a 3D view, to simplify the creation

Final Designer enables the use of AutoCAD as an alternative editor for

Summary of Changes at PDMS 11.6

VANTAGE PDMS Version 11.6.SP5

Further work has been carried out on support of international languages,

Summary of Changes at PDMS 11.6.SP1

The changes fall into 3 main categories:

PDMS Draft, with improvements to the usability of the new 3D View,

The PDMS customisation environment (PML Forms & Menus) has

Summary of Changes at PDMS 11.6.SP2

1.4.1 Support for Final Designer

Final amendments for PDMS 11.6.SP1 marked sp1

Amendments for PDMS 11.6.SP2 marked sp2

Amendments for PDMS 11.6.SP3 marked sp3.

Amendments for PDMS 11.6.SP4 marked sp4.

Querying Remote databases sp4........................................................................ 7-1

10.1 Supports catalogue for MDS sp4 ..................................................................... 10-1

sp1 sp2 sp5