UT Dallas Syllabus For Ee6378.001.07f Taught by Hoi Lee (hxl054000)

Course Syllabus
Course Information
EE 6378 Power Management Circuits, Fall 2007

Saturdays 12:30 pm to 3:15 pm
Professor Contact Information
Prof. Hoi Lee

Phone: (972) 883-4841
Email: [email protected]
Office: ECSN 4.918
Office Hours: Fridays 5:00p.m. to 6:00p.m. and Saturdays 3:30p.m. to 4:30p.m.
Webpage: www.utdallas.edu/~hoilee
Course Pre-requisites, Co-requisites, and/or Other Restrictions
EE 6326 Analog Integrated Circuit Design (Pre-requisite)

(Knowledge of single-stage amplifiers, differential amplifiers, current mirrors,
references, opamp design, frequency response, and stability and compensation)
Course Description
Operating principles of different dc-dc converters: switched-mode power
converters, charge pumps and linear regulators. Design and analysis of voltage
references and frequency compensation techniques for two-stage and three-stage
amplifiers. Use of CAD tools to simulate power management circuits.
Student Learning Objectives/Outcomes

The objectives of this course are to provide analytical understanding on
principles and circuit-level design knowledge of different power management
circuits. The students are also expected to use CAD tool such as hspice and
Cadence for circuit design and simulation in the homework and project.
The outcomes are: an ability to understand concepts in theory of advanced

electrical engineering, an ability to understand concepts in applications of
advanced electrical engineering, an ability to apply knowledge of advanced
electrical engineering to formulate and analyze problems in the student's
specialty and solve them, an ability to learn emerging concepts in theory and
applications of electrical engineering, an ability to design and conduct
experiments as well as to analyze and interpret data.
Course Syllabus Page 1

Suggested Course Materials
Fundamentals of Power Electronics 2nd Edition, by R. W. Erickson and D.

Maksimovic, Kluwer Academic Publisher, 2001. (ISBN: 0-792-37270-0)
Elements of Power Electronics, Philip T. Krein, Oxford University Press, 1998.

(ISBN: 0-135-25643-7)
Assignments & Academic Calendar
Topics
Review on Frequency Compensation of Amplifiers
Linear Regulators
Voltage References
Switched-Mode Power Converters (DC-DC Conversion)
Control Methodologies of Switched-Mode Power Converters
Magnetics
Switched-Capacitor Power Converters
Hspice Tutorial
Midterm Exam is scheduled on 10/6/07

Final Exam is scheduled on 12/1/07 starting at 12:30 p.m.
Grading Policy
The final grade will be determined by the following scheme:

Homework (20%) + Midterm Exam (20%) + Project (30%) + Final
Exam (30%).
Course & Instructor Policies
Homework will be assigned on a bi-weekly basis and be collected at the

beginning of the class on the due date. No late homework. The homework
solution will be posted on the professor’s webpage, with password protection.
Some of the homework requires the use of Hspice; tutorial will be given at the
beginning of the semester. In order to use Hspice tools at UTD, a UTD UNIX
account is required. It is OK to use Hspice tools at your workplace if preferred.
All the exams are closed book with one page of notes allowed for Midterm Exam
and two pages for Final Exam. All grades become final one week after they are
returned in class.
Students are responsible for all course materials, announcements, and notes, etc.
made during our regular class meeting time.

Field Trip Policies
Off-campus Instruction and Course Activities
Off-campus, out-of-state, and foreign instruction and activities are subject to state law
and University policies and procedures regarding travel and risk-related activities.
Information regarding these rules and regulations may be found at the website address
http://www.utdallas.edu/BusinessAffairs/Travel_Risk_Activities.htm. Additional
information is available from the office of the school dean. Below is a description of any
travel and/or risk-related activity associated with this course.
Student Conduct & Discipline
The University of Texas System and The University of Texas at Dallas have rules and
regulations for the orderly and efficient conduct of their business. It is the responsibility
of each student and each student organization to be knowledgeable about the rules and
regulations which govern student conduct and activities. General information on student
conduct and discipline is contained in the UTD publication, A to Z Guide, which is
provided to all registered students each academic year.
The University of Texas at Dallas administers student discipline within the procedures of
recognized and established due process. Procedures are defined and described in the
Rules and Regulations, Board of Regents, The University of Texas System, Part 1,
Chapter VI, Section 3, and in Title V, Rules on Student Services and Activities of the
university’s Handbook of Operating Procedures. Copies of these rules and regulations
are available to students in the Office of the Dean of Students, where staff members are
available to assist students in interpreting the rules and regulations (SU 1.602, 972/883-
6391).
A student at the university neither loses the rights nor escapes the responsibilities of
citizenship. He or she is expected to obey federal, state, and local laws as well as the
Regents’ Rules, university regulations, and administrative rules. Students are subject to
discipline for violating the standards of conduct whether such conduct takes place on or
off campus, or whether civil or criminal penalties are also imposed for such conduct.
Academic Integrity
The faculty expects from its students a high level of responsibility and academic honesty.
Because the value of an academic degree depends upon the absolute integrity of the work
done by the student for that degree, it is imperative that a student demonstrate a high
standard of individual honor in his or her scholastic work.
Scholastic dishonesty includes, but is not limited to, statements, acts or omissions related
to applications for enrollment or the award of a degree, and/or the submission as one’s
own work or material that is not one’s own. As a general rule, scholastic dishonesty
involves one of the following acts: cheating, plagiarism, collusion and/or falsifying
academic records. Students suspected of academic dishonesty are subject to disciplinary
proceedings.
Plagiarism, especially from the web, from portions of papers for other classes, and from
any other source is unacceptable and will be dealt with under the university’s policy on
plagiarism (see general catalog for details). This course will use the resources of
turnitin.com, which searches the web for possible plagiarism and is over 90% effective.

Email Use
The University of Texas at Dallas recognizes the value and efficiency of communication
between faculty/staff and students through electronic mail. At the same time, email raises
some issues concerning security and the identity of each individual in an email exchange.
The university encourages all official student email correspondence be sent only to a
student’s U.T. Dallas email address and that faculty and staff consider email from
students official only if it originates from a UTD student account. This allows the
university to maintain a high degree of confidence in the identity of all individual
corresponding and the security of the transmitted information. UTD furnishes each
student with a free email account that is to be used in all communication with university
personnel. The Department of Information Resources at U.T. Dallas provides a method
for students to have their U.T. Dallas mail forwarded to other accounts.
Withdrawal from Class
The administration of this institution has set deadlines for withdrawal of any college-
level courses. These dates and times are published in that semester's course catalog.
Administration procedures must be followed. It is the student's responsibility to handle
withdrawal requirements from any class. In other words, I cannot drop or withdraw any
student. You must do the proper paperwork to ensure that you will not receive a final
grade of "F" in a course if you choose not to attend the class once you are enrolled.
Student Grievance Procedures
Procedures for student grievances are found in Title V, Rules on Student Services and
Activities, of the university’s Handbook of Operating Procedures.
In attempting to resolve any student grievance regarding grades, evaluations, or other

fulfillments of academic responsibility, it is the obligation of the student first to make a
serious effort to resolve the matter with the instructor, supervisor, administrator, or
committee with whom the grievance originates (hereafter called “the respondent”).
Individual faculty members retain primary responsibility for assigning grades and
evaluations. If the matter cannot be resolved at that level, the grievance must be
submitted in writing to the respondent with a copy of the respondent’s School Dean. If
the matter is not resolved by the written response provided by the respondent, the student
may submit a written appeal to the School Dean. If the grievance is not resolved by the
School Dean’s decision, the student may make a written appeal to the Dean of Graduate
or Undergraduate Education, and the deal will appoint and convene an Academic
Appeals Panel. The decision of the Academic Appeals Panel is final. The results of the
academic appeals process will be distributed to all involved parties.
Copies of these rules and regulations are available to students in the Office of the Dean
of Students, where staff members are available to assist students in interpreting the rules
and regulations.
Incomplete Grade Policy
As per university policy, incomplete grades will be granted only for work unavoidably
missed at the semester’s end and only if 70% of the course work has been completed.
An incomplete grade must be resolved within eight (8) weeks from the first day of the
subsequent long semester. If the required work to complete the course and to remove the
incomplete grade is not submitted by the specified deadline, the incomplete grade is
changed automatically to a grade of F.

Disability Services
The goal of Disability Services is to provide students with disabilities educational

opportunities equal to those of their non-disabled peers. Disability Services is located in
room 1.610 in the Student Union. Office hours are Monday and Thursday, 8:30 a.m. to
6:30 p.m.; Tuesday and Wednesday, 8:30 a.m. to 7:30 p.m.; and Friday, 8:30 a.m. to 5:30
p.m.
The contact information for the Office of Disability Services is:

The University of Texas at Dallas, SU 22
PO Box 830688
Richardson, Texas 75083-0688
(972) 883-2098 (voice or TTY)
Essentially, the law requires that colleges and universities make those reasonable
adjustments necessary to eliminate discrimination on the basis of disability. For
example, it may be necessary to remove classroom prohibitions against tape recorders or
animals (in the case of dog guides) for students who are blind. Occasionally an
assignment requirement may be substituted (for example, a research paper versus an oral
presentation for a student who is hearing impaired). Classes enrolled students with
mobility impairments may have to be rescheduled in accessible facilities. The college or
university may need to provide special services such as registration, note-taking, or
mobility assistance.
It is the student’s responsibility to notify his or her professors of the need for such an
accommodation. Disability Services provides students with letters to present to faculty
members to verify that the student has a disability and needs accommodations.
Individuals requiring special accommodation should contact the professor after class or
during office hours.
Religious Holy Days
The University of Texas at Dallas will excuse a student from class or other required
activities for the travel to and observance of a religious holy day for a religion whose
places of worship are exempt from property tax under Section 11.20, Tax Code, Texas
Code Annotated.
The student is encouraged to notify the instructor or activity sponsor as soon as possible
regarding the absence, preferably in advance of the assignment. The student, so excused,
will be allowed to take the exam or complete the assignment within a reasonable time
after the absence: a period equal to the length of the absence, up to a maximum of one
week. A student who notifies the instructor and completes any missed exam or
assignment may not be penalized for the absence. A student who fails to complete the
exam or assignment within the prescribed period may receive a failing grade for that
exam or assignment.
If a student or an instructor disagrees about the nature of the absence [i.e., for the
purpose of observing a religious holy day] or if there is similar disagreement about
whether the student has been given a reasonable time to complete any missed
assignments or examinations, either the student or the instructor may request a ruling
from the chief executive officer of the institution, or his or her designee. The chief
executive officer or designee must take into account the legislative intent of TEC
51.911(b), and the student and instructor will abide by the decision of the chief executive
officer or designee.

These descriptions and timelines are subject to change at the discretion of the
Professor.

UT Dallas Syllabus For Ee6378.001.07f Taught by Hoi Lee (hxl054000)

Uploaded by

Copyright:

Available Formats

UT Dallas Syllabus For Ee6378.001.07f Taught by Hoi Lee (hxl054000)

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

UT Dallas Syllabus For Ee6378.001.07f Taught by Hoi Lee (hxl054000)

Uploaded by

Copyright:

Available Formats

Course Syllabus

EE 6378 Power Management Circuits, Fall 2007

Professor Contact Information

Prof. Hoi Lee

Course Pre-requisites, Co-requisites, and/or Other Restrictions

EE 6326 Analog Integrated Circuit Design (Pre-requisite)

Student Learning Objectives/Outcomes

The outcomes are: an ability to understand concepts in theory of advanced

Course Syllabus Page 1

Fundamentals of Power Electronics 2nd Edition, by R. W. Erickson and D.

Elements of Power Electronics, Philip T. Krein, Oxford University Press, 1998.

Assignments & Academic Calendar

Midterm Exam is scheduled on 10/6/07

The final grade will be determined by the following scheme:

Course & Instructor Policies

Homework will be assigned on a bi-weekly basis and be collected at the

Course Syllabus Page 2

Student Conduct & Discipline

Course Syllabus Page 3

Withdrawal from Class

Student Grievance Procedures

In attempting to resolve any student grievance regarding grades, evaluations, or other

Incomplete Grade Policy

Course Syllabus Page 4

The goal of Disability Services is to provide students with disabilities educational

The contact information for the Office of Disability Services is:

Religious Holy Days

Course Syllabus Page 5

Course Syllabus Page 6

You might also like