Scribd
Upload
51 views2 pages

FM: Modulation Index: Application Note

The document discusses the modulation index (mf) of frequency modulation (FM) signals. The mf is defined as the ratio of the peak frequency deviation (δ) to the modulating signal frequency (fm). This means that as the modulating frequency decreases, the mf increases. Examples are provided to demonstrate how mf changes significantly with fm, using radio station signals where mf ranges from 5 to 2500. The document also discusses the separate concept of percentage modulation, which relates the current deviation to the maximum allowed deviation set by regulations.

Uploaded by

Karthik Itachi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views2 pages

FM: Modulation Index: Application Note

The document discusses the modulation index (mf) of frequency modulation (FM) signals. The mf is defined as the ratio of the peak frequency deviation (δ) to the modulating signal frequency (fm). This means that as the modulating frequency decreases, the mf increases. Examples are provided to demonstrate how mf changes significantly with fm, using radio station signals where mf ranges from 5 to 2500. The document also discusses the separate concept of percentage modulation, which relates the current deviation to the maximum allowed deviation set by regulations.

Uploaded by

Karthik Itachi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AN_FM Modulation Index.

doc

FM : Modulation Index
Application Note

The FM Modulation Index


The index of modulation, mf, is given by
the following relationship:
mf = / fm
As can be seen from the equation, mf is
equal to the peak deviation caused when
the signal is modulated by the frequency of
the modulating signal; therefore, mf is a
function of both the modulating signal
amplitude and frequency. Furthermore, mf
can take on any value from 0 to infinity. Its
range is not limited as it is for AM.

To have example of FM Modulation Index , take SM5074 or SM5075 , and apply external
modulating signal say 1 kHz with certain amplitude , the FM modulated signal when viewed in
Analog Digital Oscilloscope e.g. HM1508-2 ( alternatively use DSO from DS1000 series) . From
FFT we can find minimum and maximum frequency component and thus , substitute the
values and we have the value of modulation index.
Another method to have feel of wide variation in modulation index with FM modulation , to
measure low and high frequency component from display of SM5074 or SM5075 at very low
frequency. e. g. set carrier frequency to about 3 kHz sine, feed external FM input , say 0.3 Hz ,
1 V sine signal from another source to the rear BNC of SM5074 and note the values of min and
max frequencies from display .
Say

carrier frequency set is 3 kHz


modulating frequency to 0.3 Hz
min frequency noted 2.479kHz
max frequency noted 3.915 kHz

thus mf = (3.915 -2.479 ) 10 3 / 0.3


= 4786.66
Another live example is from FM radio stations,

AN_FM Modulation Index.doc

Let us take a FM broadcasting radio station, 98.3MHz with a power of 10 KW. The bandwidth
of the modulation signal is from 30 Hz to 15 kHz which is excellent for high-fidelity broadcast.
The maximum deviation set by the FCC, ( ), is 75 kHz. The range of the modulation index is ;
mf(min) = /fm(max)
= 75 kHz/15 kHz
=5
(for fm= 15 kHz)
and for
mf(max) = /fm(min)
= 75 kHz/30 Hz
= 2500!
(for fm= 30 Hz)
Note that the modulation index changes a lot with the modulation frequency (from 2,500 to 5).
There is another term Percentage of Modulation similar to AM modulation depth in
percentage. However, unlike AM, it has nothing to do with the index of modulation. The
practical implementation of FM communication systems in a limited bandwidth-channel
environment, such as cellular radio, requires a limitation upon the maximum frequency
deviation to prevent adjacent channel interference. For example, the FCCs Rules and
Regulations limit FM broadcast-band transmitters to a maximum frequency deviation of
+75kHz.The maximum allowable deviation will be assigned the value of 100% modulation.
Therefore, in equation form, the percentage of modulation is given by:
% Modulation = ( / max ) x 100
This parameter is normally displayed at FM radio transmission station, when the signal is
aired.

AN_FM Modulation Index 0308

Scientific Mes-Technik Pvt. Ltd., Indore

Email : [email protected]
Web : www.scientificindia.com

You might also like