RD-2120 DS 3-1-1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3
At a glance
Powered by AI
The document discusses a WCDMA bandwidth adjustable repeater called the RD-2120, including its design, features, specifications, and operation.

The RD-2120 is designed for outdoor operation in the WCDMA band to amplify desired NodeB carriers and provide superior out-of-band rejection.

Some of the features of the RD-2120 include adjustable total output power levels, integrated wireless modem, internal backup battery, remote configuration and monitoring, and an IP65-rated enclosure suitable for all weather conditions.

WCDMA Bandwidth Adjustable Repeater

RD-2120
Features

Different total output power of 2W, 5W and 10W.


Integrated wireless modem for remote configuration, monitoring
and control.
Internal backup battery keeps the alarm unit running for up to
three hours after power loss.
OMC is available for remote operation and maintenance of
repeaters. (Optional)
Designed for all outdoor installation waterproof, damp-proof and
omni-sealed (IP65).

3GPP compliant.

Product Description
The RD-2120 bandwidth adjustable repeater is designed for outdoor operation in the WCDMA band.
Band-specific linear amplifier and filtering effectively amplifies the desired NodeB carrier and provides
superior out-of-band rejection. Typical units with adjustable bandwidth are programmed to specific
requirements of the network. Remote configuration and surveillance is possible through Combas remote
control and monitoring system, via PC or wireless modem to the OMC. Li-ion battery backup ensures alarm
signals are sent out in the event of power failure. The RD-2120 comes in a completely sealed, well-ventilated
cast aluminum enclosure, suitable for all weather conditions.

Functional Block Diagram

DL Frequency
Selective Module

LNA1

PA1

Mobile
Ant

Donor
Ant
DT

MT
Mobile

BTS

PA2

OMT
Computer with
Data card

Alarm
Indicator

UL Frequency
Selective Module

Main Control Unit

LNA2

Power
Supply

Li-ion
BATT

Modem

Wireless
Modem

OMC

OMT

Information contained in this document is subject to confirmation at time of ordering.


http://www.comba-telecom.com

II2

External
Power

Issue: 02Apr10
Control: 3-1-1
1/3

WCDMA Bandwidth Adjustable Repeater


RD-2120
Technical Specifications

Model (Total Output Power)

2W

5W

10W

33 1
85 2
85 2

1920 1980
2110 2170
1 to 3
23 1
37 1
85 2
85 2
0 30
2
5
5

40 1
85 2
90 2

Electrical
Frequency Range, Uplink
Frequency Range, Downlink
Number of Channels
Total Output Power, Uplink
Total Output Power, Downlink
Maximum System Gain, Uplink
Maximum System Gain, Downlink
Gain Adjustment Range (1dB Step)
Pass Band Ripple within 3.84MHz, p-p
System Noise Figure at Maximum Gain
System Group Delay
Out-of-Band Emission
Out-of-Band Gain
Spurious and Intermodulation
Modulation Accuracy
Input VSWR
Absolute Maximum RF Input Power
Impedance

MHz
MHz
dBm
dBm
dB
dB
dB
dB
dB
sec

3GPP TS 25.106 and 3GPP TS 25.143 standards compliant


1.5
+13
50

dBm

Power, Mechanical & Environmental


Dimensions, H x W x D
Weight (approx.)
Power Supply
Power Consumption (approx.)
Power Up Waiting Time (approx.)
MCU Battery Backup Time (approx.)
Enclosure Cooling
RF Connectors
Operating Temperature
Operating Humidity
Environmental Class
MTBF

mm
kg
VAC
W
sec
hr

C
%
hr

570 x 330 x 160


25

570 x 330 x 175


615 x 330 x 200
28
31
85 264 / 47 63Hz
150
180
240
60
3
Convection
N-Female
-33 to +55
95
IP65
50,000
Note: Typical specification at room temperature

Information contained in this document is subject to confirmation at time of ordering.


http://www.comba-telecom.com

II2

Issue: 02Apr10
Control: 3-1-1
2/3

WCDMA Bandwidth Adjustable Repeater


RD-2120
Operation and Maintenance
Using a direct serial connection to a PC, installation and commissioning of the RD-2120 is accomplished by the OMT. Using
the integrated wireless modem (data or SMS mode), the equipment parameters can be monitored and controlled
remotely.
Controlled equipment parameters include: Channel No., ATT, RF Switch, Over-Temp Threshold, DL Input Power
Threshold, DL Output Power Threshold and Alarm Report Enable
Monitored equipment parameters include: Alarms (LNA, PA, PLL unlock, Power Down, PSU Fault, Chassis Lock,
Self-Oscillation, DL Input Power Overload, DL Output Power Low, Over Temp, VSWR), DL Output Power and DL Input
Power
The RD-2120 has been developed to take advantage of advanced network operation, where the OMC (optional) provides
an effective solution for central monitoring of a group of Comba products.

330

160
2W

Information contained in this document is subject to confirmation at time of ordering.


http://www.comba-telecom.com

II2

615

570

570

Outline Drawing

175

200

5W

10W

Issue: 02Apr10
Control: 3-1-1
3/3

You might also like