SIEMENS Embebido Cat

Siemens AG 2009
Embedded and PC-based Automation

Catalog ST PC 11/2008
PC-based Automation
DRUCK_Umschlag_STPC_11_2008_en.i2 2
21.01.2009 10:18:58
U2_neu_en_V2.fm Seite 1 Dienstag, 20. Januar 2009 5:47 17
Siemens AG 2009
Related catalogs
SIMATIC
Products for
Totally Integrated Automation
and Micro Automation
ST 70
ST 80
E86060-K4680-A101-B6-7600
Industrial Communication
for Automation and Drives
IK PI
KT 10.1
NC 60
E86060-K4921-A101-A1-7600
Vector Control
SIMOVERT MASTERDRIVES VC
0.55 kW to 2300 kW
DA 65.10
Motion Control
DA 65.11
E86060-K5165-A111-A3-7600
NC 61
Servomotors
DA 65.3
Synchronous and Asynchronous

Servomotors for
SIMOVERT MASTERDRIVES
E86060-K5465-A301-A2-7600
D 81.1
E86060-K5581-A111-A3-7600
SIMOTION, SINAMICS S120
and Motors for
Productions Machines
DA 51.3
SIMOVERT MASTERDRIVES MC
0.55 kW to 250 kW
E86060-K4461-A101-A2-7600
Low-voltage Motors
IEC Squirrel-cage Motors
Frame sizes 56 to 450
Inverters MICROMASTER 411

Distributed drive solutions
COMBIMASTER 411
0.37 kW to 3 kW
E86060-K5165-A101-A3-7600
E86060-K4460-A101-B2-7600
SINUMERIK & SINAMICS
Automation Systems for
Machine Tools
DA 51.2
E86060-K5251-A131-A2-7600
E86060-K2410-A101-A6-7600
SINUMERIK & SIMODRIVE
Automation Systems for
Machine Tools
Inverters MICROMASTER
MICROMASTER 410/420/430/440
0.12 kW to 250 kW
E86060-K5151-A121-A6-7600
E86060-K6710-A101-B6-7600
SITOP
Power supplies
SITOP and LOGO!Power
D 11.1
E86060-K5511-A111-A5-7600
E86060-K4670-A101-B2-7600
SIMATIC HMI
Human Machine Interface
Systems
SINAMICS G110/G120
Inverter Chassis Units
SINAMICS G120D
Distributed Frequency Converter
Components for
Automation
DVD:
PM 21
CA 01
E86060-D4001-A500-C7-7600
Automation and Drives

Information and Ordering platform
in the Internet:
www.siemens.com/automation/mall
Innentitel.fm Seite 1 Donnerstag, 22. Januar 2009 4:19 16
Siemens AG 2009
Embedded and
PC-based Automation
Introduction
Embedded Automation
Industrial-PC
Logic Control
Motion Control and Drives
Visualization
Communication
Distributed I/O
Expansion components
Catalog ST PC November 2008

Supersedes:
Catalog ST PC April 2007 and
PDF Catalog ST PC November 2007
The products and

systems described in this
catalog are manufactured/distributed under
application of a certified
quality management
system in accordance
with DIN EN ISO 9001
(Certified Registration
No.see appendix).
The certificate is
recognized by all
IQNet countries.
The products contained in this

catalog are also contained in
the electronic Catalog CA 01.
Order No.:
E86060-D4001-A510-C7-7600 (DVD)
Please contact
your Siemens branch office.
Siemens AG 2009
Appendix
10
Siemens AG 2009
1/2
Siemens ST PC November 2008
Siemens AG 2009
Answers for Industry.
Siemens Industry answers the challenges in the

manufacturing and the process industry as well as in
the building automation business. Our drive and automation
solutions based on Totally Integrated Automation (TIA) and
Totally Integrated Power (TIP) are employed in all kinds
of industry. In the manufacturing and the process industry.
In industrial as well as in functional buildings.
Siemens offers automation, drive, and

low-voltage switching technology as
well as industrial software from standard products up to entire industry solutions. The industry software enables our
industry customers to optimize the entire value chain from product design
and development through manufacture
and sales up to after-sales service. Our
electrical and mechanical components
offer integrated technologies for the entire drive train from couplings to gear
units, from motors to control and drive
solutions for all engineering industries.
Our technology platform TIP offers robust solutions for power distribution.
The high quality of our products

sets industry-wide benchmarks.
High environmental aims are part of
our eco-management, and we implement these aims consistently. Right
from product design, possible effects on
the environment are examined. Hence
many of our products and systems are
RoHS compliant (Restriction of Hazardous Substances). As a matter of course,
our production sites are certified according to DIN EN ISO 14001, but to us,
environmental protection also means
most efficient utilization of valuable
resources. The best example are our
energy-efficient drives with energy savings up to 60 %.
Check out the opportunities our

automation and drive solutions provide.
And discover how you can sustainably
enhance your competitive edge with us.
1/3
Siemens AG 2009
ERP Enterprise Resource Planning

Ethernet
Management Level
MES Manufacturing Execution Systems

Ethernet
Operations Level
SIMATIC PCS 7
Process Control (DCS)
Industrial Ethernet
Industrial Software for

Design and Engineering
Installation and Commissioning
Operation
Maintenance
Modernization
and Upgrade
Control Level
SINUMERIK
Computer Numeric Control
SIMOTION
Motion Control System
Process Instrumentation
SIMATIC Sensors
Field Level
AS-Interface
30.04.2008
PROFIBUS PA
Totally
Integrated
Automation
HART
IO-Link
Setting standards in
productivity and competitiveness.
Totally Integrated Automation.
Thanks to Totally Integrated Automation, Siemens is the only provider
of an integrated basis for implementation of customized automation
solutions in all industries from inbound to outbound.
1/4
Siemens AG 2009
SIMATIC IT
SIMATIC WinCC
SCADA System
SIMATIC NET
Industrial
Communication
SIMATIC Controllers
Modular/Embedded/
PC-based
SIMATIC HMI
Human Machine Interface
Safety Integrated
SIRIUS Industrial Controls
SENTRON Switching
Devices
SIMOCODE pro
Motor Management
System
PROFINET
Industrial Ethernet
PROFIBUS
AS-Interface
SINAMICS Drive Systems

SIMATIC Distributed I/O
Totally
Integrated
Power
KNX/EIB GAMMA instabus
TIA is characterized by its unique

continuity.
It provides maximum transparency at
all levels with reduced interfacing
requirements covering the field level,
production control level, up to the
corporate management level. With TIA
you also profit throughout the complete
life cycle of your plant starting with
the initial planning steps through
operation up to modernization, where
we offer a high measure of investment
security resulting from continuity in the
further development of our products
and from reducing the number of
interfaces to a minimum.
The unique continuity is already

a defined characteristic at the
development stage of our products
and systems.
The result: maximum interoperability
covering the controller, HMI, drives, up
to the process control system. This
reduces the complexity of the
automation solution in your plant. You
will experience this, for example, in the
engineering phase of the automation
solution in the form of reduced time
requirements and cost, or during
operation using the continuous
diagnostics facilities of Totally
Integrated Automation for increasing
the availability of your plant.
1/5
Siemens AG 2009
Integrated power distribution

from one source.
Totally Integrated Power.
1/6
Siemens AG 2009
Communication
IEC 61850
PROFINET
BACnet
Industrial Ethernet
PROFIBUS
Processes /
industrial automation
KNX EIB
Products and systems

Medium voltage
Transformers
Low voltage
Installation
technology
Building
automation
110 kV
03.04.2008
Planning and system configuration
Electrical power distribution in

buildings requires integrated solutions.
Our response: Totally Integrated Power.
This means innovative and integrated,
interface-optimized products and
systems which have been optimally
coordinated and complemented with
communication and software modules
that link power distribution to building
automation or industrial automation.
Totally Integrated Power accompanies
power distribution projects from one
end to the other. From A to Z.
From the planning to the buildings use:
Totally Integrated Power offers significant advantages in every project
stage and to everyone involved in the
project the investors, electrical planning engineers, electricians, users
and building facility managers.
Our portfolio comprises everything

from engineering tools to the matching
hardware: from switchgear and
distribution systems for medium voltage to transformers, from switching
and circuit-protection devices to
low-voltage switchgear and busbar
trunking systems, as far as to the small
distribution board and the wall outlet.
It goes without saying that both the
medium-voltage switchgear, which
requires no maintenance, and the
low-voltage switchgear are type-tested,
and their busbar connections, too.
Comprehensive protection systems
ensure the safety of man and machine
at any time.
1/7
Siemens AG 2009
Technology with a future

PC-based Automation
Overview
Why PC-based Automation or Embedded Automation?
The PC is a unique success story, and many areas of everyday
life are unimaginable without it. PC know-how is taken for
granted nowadays, and standards have been produced (hardware components, operating system, GUIs, communication
etc.) which have become interesting for a growing number of
applications because of the constantly increasing performance
and lower cost of the PCs.
In the automation engineering sector, the small number of PC
applications particularly for visualization purposes have developed in the meantime into comprehensive applications for
complex tasks.
This has basically been promoted by two aspects:
The PC offers new possibilities with respect to flexibility, cost
reductions and time-to-market together with enormous increases in performance.
PC technologies provide new application possibilities in a
standardized environment on the one hand, and also permit
simple interfacing of such PC-based solutions to the office
world.
Automation solutions based on these technologies thus inevitably lead to integration of all important components (visualization,
logic control, motion control, distributed I/O, IT integration etc.)
either as a PC-based Automation system or as an embedded
automation system which combines the capabilities of the classic PLC world with the openness and performance of the PC
world.
Embedded Automation
In recent years, it has been possible to produce a new class
of embedded PC as a result of the rapid development in PC
technology.
Technologies are being applied which increase the ruggedness
of such devices to a new level. A modern embedded PC no
longer requires a fan thanks to new, low-power processors and
an appropriate enclosure design.
Furthermore, rotating mass storage units are no longer required
as the conventional hard disk is replaced by a flash memory
card. Extremely compact, powerful and rugged embedded automation systems for use at machine level can then be produced
based on a compact embedded operating system (XPe) and in
association with software PLCs, visualization software and technology or motion control functions. Embedded automation offers
an additional customer benefit, since the logic control, visualization and technology or motion control functions have already
been installed in the corresponding versions and are ready for
use. This results in time savings for the engineering/commissioning of your applications.
Advantages of PC-based Automation

Cost savings through integration
Benefiting from continuous PC innovations
Simple communication through integral network interfaces
Simple utilization of business SW (e.g. MS Office) / own SW
(C++/VB...)
Standardization means a wider selection
High investment protection
High system availability
Utilization of known PLC engineering tools (STEP 7)
Interchangeability of parameter settings and user software
Integral diagnostics/signaling functions
Optimum integration with visualization, motion control,
industrial PC, distributed I/O, communication, IT world etc.
(PC-based Automation)
Openness of IT world
Open for non-Siemens components
Additional advantages of Embedded Automation
Siemens offers a complete range of automation products for PCbased and embedded automation which with the experience
of the market leader have been developed on the basis of
Totally Integrated Automation and are part of the large SIMATIC
family.
Ready-to-use, rugged embedded automation products for
control, visualization and motion control
High ruggedness and freedom from maintenance with
embedded automation
Data retentivity
High degree of flexibility and openness
Siemens PC-based & Embedded Automation
A whole range of possibilities automation solutions from
Siemens: always your first choice for every automation task.
Further information is available on the internet under:
www.siemens.com/pc-based
1/8
Siemens AG 2009

PC-based Automation
Categories
Embedded Automation
Ready-to-use platforms for a wide variety of tasks.
SIMATIC Embedded Automation is our consistent continuation
of Totally Integrated Automation in the embedded division. For
the first time, it provides you with all of the proven characteristics
of a classic PLC - combined with all of the advantages of innovative PC-based solutions.
Industrial PC
The reliable and innovative industrial PCs constitute the optimum
PC hardware platform for PC-based Automation from Siemens.
We provide a powerful spectrum of industry-standard PCs with
high system availability and high investment security in box
form, rack form and panel PC design (SIMATIC PC).
New expansions in hardware and software such as the SIMATIC
PC DiagMonitor diagnostics/signaling software and the SIMATIC
PC Image Creator software for preventive data backup increase
the system availability in PC-based Automation applications
even further.
Logic Control
The PC can already take over many classical control functions
today. The Siemens controller for PC-based Automation is
SIMATIC WinAC:
WinAC provides a range of scaleable solutions with real-time
and deterministic features even for embedded applications.
WinAC is optimally embedded in the Windows world and includes appropriate interfaces for visualization components.
Special optional packages are available for interfacing technological functions.
Use your PC to perform complex technological tasks typical for
motion control. Coupled axes, winder controls or electronic
cams can be optimally implemented as PC-based solutions.
With the expanded PROFIBUS for drive controls (isochrone
mode or broadcast mode), modern digital drives can be optimally controlled.
SIMATIC IT
Manufacturing
Execution System
(MES)
Variable-speed drives and servo motors feature the highest

dynamic performance and excellent dynamic response. The
modular, rugged design, also in distributed systems, helps to
save costs during the design phase and in the daily production
process.
Siemens supplies a complete spectrum of converters based on
the latest technology, ranging from standard drives up to high
dynamic drives. And PROFIBUS ensures seamless integration
from configuring to diagnostics.
Visualization
Visualization tasks and PC-based Control can be ideally combined on a single PC.
Visualization covers all functions from operation, plant display,
message management, measured value archiving and recipe
management. ProTool/Pro, WinCC flexible and WinCC are HMI
systems with optimized interfaces for SIMATIC WinAC.
Communication
PC-based Automation facilitates integration of the machine level
and the IT world on a single platform. Using Industrial Ethernet
and PROFIBUS, SIMATIC NET ensures communication with
higher-level control systems as well as I/O at the field level.
Distributed I/O
The standardized fieldbuses PROFIBUS and PROFINET provide
an interface to the open world at the fieldbus level. Its system
architecture facilitates fast configuration and rapid startup. With
the SIMATIC ET 200 system, Siemens provides a complete
spectrum of block, modular and IP65 I/Os.
PC-based Automation in the system environment
Siemens PC-based Automation is easily integrated in the automation environment with SIMATIC.
Engineering is based on the tried and tested SIMATIC Industry
Software (e.g. STEP 7) and permits unique integration of the
SIMATIC products used. The optimum configuration for an automation task can thus always be selected depending on the required features.
SIMATIC WinCC
Visualization
Archives
Data bases
SIMATIC Field PG
Configuration
Programming
STEP 7
Siemens Embedded Automation

SIMATIC S7
SIMOTION P350
WinCC flexible
SIMATIC
Panel PC
SIMATIC Rack PC
SIMATIC Box PC
Microbox PC
WinCC flexible,
WinCC,
WinAC
Software PLC
WinAC
Software PLC
WinAC
Software PLC
Industrial Ethernet
SIMATIC
Microbox PC 427B-RT
Panel PC 477B-HMI/RTX
S7-modular Embedded Controller
EC31-RTX
PROFINET
PROFIBUS
SIMATIC HMI Panel
Operator Control &
Monitoring
ET 200
SIMOTION D / SINAMICS / MICROMASTER
1/9
Siemens AG 2009

PC-based Automation
Application examples
Temperature control: Hot runner technology for injection molding machines

Initial situation
No central solution for hot runner controls
High number of channels required
Comfortable operation required
Very fast hot runner control
Grouping option required
Self-setting for control parameters required
High control accuracy, no overshoot
Wide range of sensors and high accuracy (e.g. PT1000)
The system concept
9
6,723
'&836
PRGXOH
6,0$7,&
0LFURER[3&%
:LQ$&57;
:LQ&&IOH[LEOH
2)),&(QHWZRUN
,QGXVWULDO(WKHUQHW
352),%86'3
(7
0
%DWWHU\PRGXOH
6ROLG6WDWH5HODLV
WRWKH
7HPSHUDWXUH
KHDWLQJFDUWULGJHV
VHQVRU
7HPSHUDWXUH
VHQVRU
*B673&B;;B
The advantages of the Siemens PCbA solution

Extremely compact
Visualization + control functionality in one Microbox
Scalable up to channel numbers of max. 160 controllers
User-friendly, centralized operator input over WinCC flexible under
XP Pro
Fully fledged PLC (WinAC) is included, that is, it can be expanded
for a specific customer
Can be networked with other plant sections, e.g. via S7 communication
Measurement of foil thickness

Initial situation
High precision, uniform thickness of the entire width is a decisive
quality criterium when producing plastic foils.
To achieve this high quality a measuring head with radioactive ray
emitter above and a sensor below the foil are moved back and forth
across the running foil.
Use of the radiation attenuation enables extensive mathematical calculations to be carried out in order to determine the exact thickness
of the foil at every position. Deviations in foil thickness can thus be
easily corrected.
The system concept
3DQHO3&%
:LQ&&
:LQ$&57;
&3$
9LVXDO&
(YDOXDWLRQRIWKH
PHDVXUHGYDOXHV
(70
'ULYH
352),%86
1/10
*B673&B;;B

Visualization takes place using WinCC and control by using WinAC
RTX on one PC.
Evaluation of extensive measurement data requires complex
mathematical algorithms.
These are implemented using C++. The seamless, high performant integration of these algorithms into the STEP 7 program is
achieved using the ODK (Open Development Kit).
In order to visualize the large amount of measurement curves, data
exchange between WinAC RTX and WinCC is carried out rapidly
using a hard disk cache. This functionality is also implemented with
ODK.
The interconnection of the standardized technology function is
carried out using a CFC (Continous Function Chart).
Siemens AG 2009

PC-based Automation
PC based control of varnishing lines for automobile plastic parts

Initial situation
For reasons of quality assurance and product liability, varnishing
line manufacturers decided to use a superordinated computer to
archive process data of a varnishing line for flat parts which rapidly
developed into a PC based automation system with control tasks.
The system concept
/LQX[
6HUYHU
)LEHURSWLFFDEOH(WKHUQHW
5DFN3&%
:LQ$&57;
:LQ&&IOH[LEOH

Performance of the PC based control WinAC Basis
Coupling to Linux server using Industrial Ethernet optical fiber net
Open and flexible for extensions
Integration into the available automation concept possible
Archiving and backup of process data and production data
acquisition
352),%86'3
(70
6
23
%
6
03, '3
(OHFWURQLF
IUHTXHQF\
FRQYHUWHU
73
96
23
*B673&B;;B
23
Modular Embedded Automation

The advantages of the Siemens Embedded Automation solution
The automation solution can be precisely tailored to the requirement due to the design of the Modular Embedded Controller
(EC31)
The distributed I/Os are connected in a future-oriented way via
onboard PROFINET (ERTEC) with 2 ports. It also opens the world
of Open User Communication (via TCP/IP) for connecting the
cameras
With the modern CoreDuoTM processor, the EC31 provides high
performance for the large number of required functions and, with
the ready-to-use WinAC RTX 2008 and the WinCC flexible 2008
expansion, it meets all of the needs with one device (incl. connecting to a printer via USB)
The connection to existing systems is made via PROFIBUS
(CP 5603) in the EM PCI-104 expansion module
With the EM PC expansion module you can easily connect a local

monitor, or a ThinClient via Ethernet, for remote operation
Initial situation
For expanding an existing bottling plant, an automation solution
should be found which covers a wide range of functions. The connection to the existing plant units should be made via
PROFIBUS. For the newly required I/Os, both centralized and distributed signals as well as cameras are connected via TCP/IP.
Visualization and control run on one programmable controller. It is
possible to connect a bar code reader (RS232) and a log printer via
USB. A ThinClient (approx. 100 m away) also permits access to the
visualization (in addition to the existing centralized monitor). The
capability of carrying out the engineering (STEP 7) via Ethernet is
also to be provided for.
The system concept

PG
Industrial Ethernet
EM
PCI-104
with CP
5603 *) mEC
> 100m
bar code reader
THIN CLIENT
EM PC *)
31-RTX
Industrial Ethernet
plant network
SM
RS232
DVI
digital/analog
I/Os
USB
Flat Panel
PROFIBUS to available system
PROFINET
*) available soon
ET 200
Camera
ET 200
Camera
1/11
Siemens AG 2009

PC-based Automation
Pipe bending
Initial situation
In pipe bending, round material (pipe, rod, wire, cable, etc.) is
actively reformed using a bending head. The bending head guides
the material around a bending roller or die. The end position of the
bending head is the dimension for the bending angle. The bending
radius is dependent on the die and can therefore not be altered
during machining.
The system concept
SIMOTION P350
PROFIBUS
DRIVE-CLiQ
TM31
ET 200S
Distributed I/O
SINAMICS S120
Z1
Z2
P/Q
Lifting
P P
Feed Y
X1
X2
Turning B Transverse
Bending C
G_PM10_EN_00161a
The advantages of the Siemens PC-based solution

Reduced engineering overhead thanks to configuring, programming and commissioning with one system, the SCOUT engineering
system
Fewer interfaces, since different tasks are performed on the same
hardware
Simplified commissioning of drives by means of an electronic
motor rating plate
Optimized machine operation thanks to user-friendly, flexibly adjustable and reproducible process parameters on the HMI device,
e.g. pressure, positions
Increased availability of the machine through wide-ranging diagnostic functions in SIMOTION in the case of a plant failure
TIA integration simplifies integration of HMI, I/O and drives
Hydraulic press
tasks such as punching, deep-drawing or pressing all the way to
internal high-pressure forming (IHU).
A machine comprises not just the hydraulic press itself, the tool can
also contain hydraulic actuators and control loops, especially in the
case of internal high-pressure forming. A distinction is made
between single or multiple-action drawing presses, depending on
the number of axes acting on the metal sheet (plungers,
die cushions, sheet metal holders, ejectors).
The system concept
Factory network
Initial situation
A hydraulic universal press is characterized by its plunger mechanism in the form of one or more hydraulic cylinders. It is used for
1/12
SCALANCE S
SIMOTION P
PROFINET
ET 200S
High Speed
ET 200S
High Speed
DRIVE-CLiQ
SSI
AI AO
Control
Hydraulic press
variable
(servo-valve)
SINAMICS S120
Pressure
Position
Plunger
Die cushion
Handlingaxes
1FK7/1FT7
Servo motors
G_PM10_EN_00193
The advantages of the Siemens PC-based solution

Implementation of motion control, PLC and technology functions in
one integrated system
Optimized machine cycles due to deterministic real time and short
cycle times result in high product quality and productivity
Combination of any number of electric and hydraulic axes
Prefabricated functional modules (hydraulic controller, synchronization, cam disks, cam -controller, etc.)
Synchronized axes can be distributed between several control
systems
On-the-fly switchover between position and pressure control
Automatic acquisition of the valve characteristic/controlled system
Valve curves can be graphically edited and adapted using the
CAM tool
Press force measurement and tool protection with scanning rates
significantly lower than 1 ms thanks to fast signal acquisition/signal
output via the SIMATIC ET200S High-Speed I/O
Open, application-based solution, can be individually adapted by
the OEM
Siemens AG 2009

PC-based Automation
PC-based control in automobile test bays

Initial situation
Test bays in the automobile industry require fault-free operation and
high quality. Control, processing, archiving and visualization of the
measured data require a high-performance system that offers
openness and flexibility for connection to different bus systems and
for the use of software
The system concept
7RXFKSDQHO
56
0LFURER[
57;
86%
/DEHOSULQWHU

Flexible, service and maintenance-friendly system with Windows
XP-Embedded in conjunction with SIMATIC WinAC
Reduction of the integration overhead thanks to integral interfaces
such as PROFIBUS, Ethernet and CAN, and flexibility in the use of
modules for different bus systems, e.g. PC/104
System availability concept guarantees round-the-clock operation
and reduces downtime costs
Fan-free, heat-resistant operation to 50 C saves on additional
cooling measures
High level of investment security thanks to long-term availability of
the components
,QGXVWULDO(WKHUQHW
&$1%XV
%DUFRGH
VFDQQHU
9HKLFOH
FRQWUROXQLW
352),%86'3
'LVWULEXWHG
,2
6HQVRUV
6HQVRUV
*B673&B;;B
'LVWULEXWHG
,2
PC-based control in the semiconductor industry

Initial situation
In the semiconductor industry, high quality and fault-free operation
round-the-clock are decisive criteria. A high-performance system
that guarantees high-speed and precise production of the semiconductors is required for controlling the machines, monitoring the production system and processing the production data.
High flexibility and openness are also required for connecting to the
production control system and machine engineering system.
The system concept
7RXFKSDQHO
+RVW
,QGXVWULDO(WKHUQHW
6,0$7,&
%R[3&%

Compact, rugged industrial PCs with powerful processors and the
latest technology enable high processing performance
Pre-installed systems save time and costs when integrated into the
overall system
WinCC ToolLink-EDA (equipment data acquisition) enables diagnostics of process and machine data in real time
System availability concept with integral RAID1 functionality and
remote monitoring with SIMATIC PC DiagMonitor ensures fault-free
24-hr operation
High investment security through long-term availability of the components
International certification and worldwide support guarantee global
use
,QGXVWULDO(WKHUQHW
3RUWWR
(QJLQHHULQJ
V\VWHP
+8%
6,0$7,&23
0HDVXULQJDQG
FRQWUROLQVWUX
PHQWVVHQVRUV
*B673&B;;B
0DFKLQH
FRQWURO
YLVXDOL]DWLRQ
6,0$7,&
%R[3&%
1/13
Siemens AG 2009

PC-based Automation
Measured value acquisition and communication with SIMATIC PC

Initial situation
The most important prerequisites for the acquisition of measured
values are reliability, flexibility and security. The measured values
must be continuously acquired and error-free. At the same time, the
measuring systems should be flexible and adaptable to future products or changing products.
The measuring data must be recorded during the entire measuring
cycle. At the same time, there must be communication with the
devices under test, e.g. for starting a test program while the measuring values are being acquired. The measuring values should
then also be saved for quality checks and documentation.
Compact, rugged SIMATIC PC with high processor performance
and the latest technology for quick acquisition and processing of
measuring values, as well as communication solutions
Can be flexibly adapted for the respective test purpose by means
of expansion card slots and several onboard interfaces
Optional, onboard industrial interfaces such as PROFINET and
PROFIBUS for easy networking with industrial components, e.g.
distributed I/Os
High degree of system availability, e.g. thanks to diagnostic software and RAID1 (mirrored hard disks) to prevent downtimes
Proven interaction with many other Siemens components, such as
controllers and distributed I/Os for easy implementation of complete solutions
High investment security through long-term availability of the components
The system concept

Flat Panel
S7-400
USB and DVI
Industrial Ethernet
Box PC
627B
Microbox
PC 427B
Serial
RS232-interface
for communication
with test specimen
PROFIBUS
Laser for
vibration
measurement
Test specimen
Image processing with data backup

Initial situation
In image processing applications, high performance computers are
required due to the large volume of data to be processed. The
image data must be quickly acquired, processed and saved. Frame
grabber cards with high data throughput rates are used, for example, for acquiring image data. The interfaces for the expansion
cards must not become bottle-necks in this case. To ensure continued problem-free processing of the acquired data, you need a
state-of-the-art system with up-to-date processor and memory technology. A great deal of data is also handled in the subsequent data
backup. Thus, the available storage medium must be fast and failsafe. An open system is required for connecting to existing plants.

Rugged SIMATIC PC with state-of-the-art processor performance
and the latest technology
Current interfaces such as PCI Express for applications with a high
data throughput rate, e.g. frame grabber cards for the acquisition
of image data
Visualization on up to two monitors with an optional, high-performance graphics card
Communication interfaces such as Ethernet and PROFINET, e.g.
for connecting to EPS systems or onboard integration in existing
systems
International certifications and global support facilitate the worldwide use of the image processing solution
The system concept

control center
server room
Rack PC 547B for
visualization and
intermediate storage
of data
Rack PC 547B
server for data
management
Flat Panel
Industrial Ethernet
machine-oriented
Rack PC 847B with
PCIe-frame grabber cards
Camera
.
.
.
1/14
Siemens AG 2009
Embedded Automation
2/2
Introduction
2/4
2/4
SIMATIC Embedded Automation

SIMATIC S7-modular Embedded
Controller (mEC)
SIMATIC Microbox 427B-RTX, HMI/RTX
SIMATIC Panel PC 477B-HMI,
- HMI/RTX, -RTX
SIMATIC MP 177
SIMATIC MP 277 (incl. INOX)
SIMATIC WinAC MP
SIMATIC THIN CLIENT
2/5
2/6
2/9
2/11
2/14
2/17
2/19
N
N
Siemens AG 2009
Embedded Automation
Introduction
Overview
Microbox 427B-RTX, Microbox 427B-HMI and Microbox
427B-HMI/RTX
Microbox 427B-RTX or Microbox 427B-HMI/RTX are ready-torun combined embedded PCs with WinAC RTX and optionally
with SIMATIC WinCC flexible.
The combination links the openness of PC-based controllers

with the ruggedness of a conventional PLC: Flexible software
and powerful, scalable hardware in an open, compact network.
An automation system is thus available to users with which strict
real-time automation tasks and superior visualization tasks can
be handled on a compact and rugged platform. In addition, this
platform offers flexibility and effective integration into the overall
task. This includes the close link with data processing or
logistics systems as well as the link to technological tasks such
as motion or vision systems. Windows XP Embedded is used as
the operating system.
An embedded PC or an embedded device is combined with

automation software (e.g. Software PLC, HMI system, etc.) as a
ready-to-use product.
Windows XP Embedded or Windows CE are used as operating
system.
SIMATIC Embedded Automation comprises:
Controller
Technology
Visualization
Data processing
Communication
on a common embedded PC platform.
S7-mEC, EC31-RTX
SIMATIC S7-mEC is a modular controller in S7-300 design with
the latest embedded PC technology.
The embedded controller combines the advantages of the tried
and tested modular S7 controller with PC technology in one new
device.
SIMATIC S7-mEC RTX stands out due to:
Maximum ruggedness without fan or hard disk
Modular expansion options, e.g. central expansion with
S7-300 I/O
Commissioning by specialist automation personnel as with the
S7-300
SIMATIC WinAC RTX already installed as software PLC.
2/2
Panel PC 477B-HMI, Panel PC 477B-RTX and

Panel PC 477B-HMI/RTX
The Panel PC 477B-HMI contains a preinstalled runtime of the
WinCC flexible HMI software.
The Panel PC 477B-RTX includes the high-performance control
software, preinstalled and preconfigured for PROFIBUS or
PROFINET.
The Panel PC 477B-HMI/RTX includes both software installations.
Both panels are available in 12, 15" and 19 front versions either
with touch or key functionality. With its compact design, the
Panel PC 477B-HMI and 477B-HMI/RTX is the ideal combination
of control and HMI functionality on one platform and also offers
the openness of a PC-based system.
Multipanels MP 177, MP 277 and MP 377 with WinAC MP
Multi Panels (MP) are like Operator Panels used to control
and monitor machines on site.
Their functionality can be expanded by the installation of
additional Windows CE applications (Software PLC and
Sm@rt options).
The SIMATIC Multi Panels on the basis of Windows CE
combine the rugged construction of operator panels with the
flexibility of PCs.
With the SIMATIC Multi Panels, the data in the message buffer
are retained even when the panel is disconnected from the
power supply, without battery backup.
Siemens AG 2009
Embedded Automation
Introduction
Overview (continued)
Modular Control
SIMATIC S7
Customer benefits
PC-based
Automation
Embedded Automation
Multi Panel
(MP)
S7-modular
Embedded
Controller (eEC) RTX, -HMI/RTX
Microbox 427B
Panel PC 477B
-RTX, -HMI/RTX,
-HMI
n n
on SIMATIC PC
Design
Ruggedness
n n
(depending on hardware expansion)

Design
modular
compact
modular
compact
depending on
design
Spare part availability

(starting from date of
discontinuation)
10 years
10 years
5 years
5 years
5 years
Quick restart after power failure
Hard real-timet
n n
n n
n n
n n
Quick program handling
n n
n n
up to n n n
(depending on
processor)
Safety Integrated
(only via ET200

subsystem)
(only via ET200

subsystem)
(only via ET200

subsystem)
(only via ET200

subsystem)
Performance
I/O connection
Central/distributed
n n / n n
/n
n / n n
/ n n
/n
User KnowHow
n
PLC
n n n
n n
n n
PC
n n
n n n
Openness
integrating C++-programs
Further processing of data with
external programs via OPC on
a hardware platform
Modularization with distributed

Intelligence (CBA)
Integration of PLC and HMI on a

hardware platform
Ready-to-run preconfigured
Previous knowledge
HMI
n n
Openness
applies
applies under certain conditions
does not apply
Decision guide for the application of Embedded Systems
2/3
Siemens AG 2009
Embedded Automation
SIMATIC S7-modular Embedded Controller
Overview
Ordering data
Order No.
SIMATIC S7modular Embedded Controller

EC31
6ES7 677-1DD00-0BA0
6ES7 677-1DD00-0BB0
1.2 GHz Intel CoreDuo processor

Memory configuration:
1 GB RAM, 2 GB flash disk;
Interfaces:
1 Industrial Ethernet port,
2 PROFINET ports, 2 USB ports,
1 slot for multimedia card;
Software:
Windows XP embedded preinstalled, Software Development
Kit (SDK) for creating C/C++
applications with access to
central I/O modules
EC31-RTX
Quick start in automation solutions with embedded PC platforms.

- SIMATIC WinAC RTX pre-installed ready to use on EC31
- Pre-configured for use in a SIMATIC environment with
PROFINET and Industrial Ethernet
- Commissioning by specialist automation personnel as with
the S7-300
- Configuration and programming with SIMATIC STEP 7 via
Industrial Ethernet
Modular expansion options, e.g. central expansion with
S7 300 I/O (SM modules of the S7-300)
Rugged operation
- Operation without hard disk, based on flash disk and
Windows XP embedded
- Operation without fan
Flexibility of a PC-based automation environment
- Spare memory capacity on flash disk can be used for further
PC applications
- Use of WinAC ODK with SIMATIC WinAC RTX
- Connection option for USB devices
- storage space can be expanded via Mulitmedia Card
Data retention for WinAC RTX without uninterruptible power
supply (UPS)
2/4
1.2 GHz Intel CoreDuo processor

1 GB RAM, 2 GB flash disk;
Interfaces:
1 Industrial Ethernet port,
2 PROFINET ports, 2 USB ports,
1 slot for multimedia card;
Software:
Windows XP embedded and
WinAC RTX 2008 pre-installed
Z) Subject to export regulations: AL: N and ECCN: 5D992
Siemens AG 2009
Embedded Automation
SIMATIC Microbox 427B-RTX, -HMI/RTX
Overview
Application
The SIMATIC Microbox 427B-RTX combines the advantages of
PC-based control solutions with those of the established PLC
world: It offers on one hardware the flexibility for integration of
various tasks of an automation solution. The fanless design with
no hard disk of the Microbox PC allows the use of the solution
directly at the machine in harsh environment. With the Ethernet
and PROFIBUS interfaces the system can, with a minimum effort,
be integrated in already existing automation environments
(SIMATIC range, Siemens drive systems).
The Microbox RTX is the preferred platform, if the following criteria for automation solutions must be fulfilled:
Ultra-compact, unattended operation("headless operation)
Operation with remote screen
Integration of various tasks like controlling, visualizing,
technology functions or data processing in one hardware
Application of user-specific hardware and software
Usage in machines
Quick start in automation solutions with embedded PC

platforms.
- SIMATIC WinAC RTX ready-to-run preinstalled on Microbox
PC 427B
- PROFIBUS, PROFINET and Industrial Ethernet preconfigured for use in a SIMATIC environment
- Optionally WinCC flexible for visualization tasks
- Configuration and programming with SIMATIC STEP 7 via
Industrial Ethernet, PROFINET, or PROFIBUS
Rugged operation
- Operation without hard disk based on Compact-Flash-Card
(CF-Card) and Windows XP embedded
- Fanless operation
- Freer storage space on CF-Card useable for further PC
applications
- Connection option for USB devices, flat panel monitor or
screen
- PCI 104 cards pluggable
128 KB remanent data for WinAC RTX even without uninterruptible power supply (UPS)
New
Versions with integrated PROFINET interface available
Current product versions of the pre-installed software:
- SIMATIC WinAC RTX 2008
- SIMATIC WinCC flexible 2008
- SIMATIC Net Edition 2007
Ordering data
Order No.
6ES7 675-1C 7 7 0-0 7 7 0
SIMATIC Microbox 427B-RTX,

-HMI/RTX and -HMI
CPU:
Celeron M, 900 MHz,
PROFIBUS, 512 MB RAM
B2
Celeron M, 1 GHz,
PROFIBUS, 1 GB RAM
F3
Celeron M, 1 GHz,
PROFINET, 1 GB RAM
G3
Pentium M, 1.4 GHz,

PROFIBUS, 1 GB RAM
K3
Pentium M, 1.4 GHz,

PROFINET, 1 GB RAM
L3
Mass storage:
2 GB CompactFlash, Windows
XP embedded and preinstalled
software
4 GB CompactFlash, Windows
XP embedded and preinstalled
software
Software configuration:
WinAC RTX 2008
WinCC flexible RT 128 PT
WinAC RTX,
WinCC flexible 2007 RT 128 PT
WinAC RTX,
WinAC RTX,
E) Subject to export regulations: AL: N and ECCN: 5D002ENC3

2/5
Siemens AG 2009
Embedded Automation
SIMATIC Panel PC 477B-HMI, -HMI/RTX, -RTX
Overview
Application
SIMATIC Panel PC 477B-HMI, 477B-HMI/RTX and 477B-RTX
The SIMATIC Panel PC 477B is the perfect combination of the

ruggedness of an embedded platform and the openness of a
PC:
It offers the flexibility for integrating various tasks of an
automation solution on a hardware device.
The fan and hard disk free design of the Panel PC permits use of
the solution directly on the machine in a rugged environment.
The Ethernet and PROFIBUS/PROFINET interfaces allow the
system to be integrated in existing automation environments
(SIMATIC world, Siemens drive systems).
The Panel PC 477B is the platform, where the following criteria
are to be met for the automation solution:
Compact, rugged and maintenance-free
Integration of various tasks such as visualization, control or
data processing on the same hardware
Utilization of application-specific hardware and software
Machine-oriented application
Quick start in automation solutions with Embedded

Automation
- SIMATIC WinCC flexible RT preinstalled and ready to switch
on (Panel PC 477B HMI) or SIMATIC WinCC flexible and
SIMATIC WinAC RTX preinstalled and ready to switch on
(Panel PC 477B HMI/RTX)
- PROFIBUS and Industrial Ethernet pre-configured for use in
a SIMATIC environment
- Configuration and programming with SIMATIC WinCC
flexible ES and SIMATIC STEP 7 via Industrial Ethernet or
PROFIBUS
Rugged operation
- Hard-disk-free operation based on Compact Flash card
(from 2 GB CF card) and Windows XP embedded
- Operation without fan
- Open for additional PC applications
- Can be expanded with PC/104+ cards
- Connection option for USB devices, flat panel monitor or
screen
Data retention for WinAC RTX without uninterruptible power
supply (UPS)
2/6
Siemens AG 2009
Embedded Automation
Ordering data
Order No.
Order No.
Versions for "Embedded Automation", TIA applications
Further Panel PCs as build to order versions
(preferred versions from stock))
(max. delivery time 15 working days)
SIMATIC
Panel PC 477B embedded
6ES7 676- 7 BA00-0 7 7 0
Celeron M 1.0 GHz processor,

main memory 1 GB DDR2
SDRAM,
power supply 24 V DC,
PROFIBUS DP interface
Z
SIMATIC
6AV7 85 7 -0A 7 7 7 - 7 7 A0
24 V DC power supply
Front panels
Front panels
12 TFT Touch
12 TFT Key
15 TFT Touch
15 TFT Key
19 TFT Touch
12 TFT Touch
12 TFT Key
15 TFT Touch
15 TFT Key
19 TFT Touch
Processor
Mass storage
CompactFlash 2 GB
CompactFlash 4 GB
Software
With Windows XP embedded
operating system (EN/DE)
preinstalled
With operating system and HMI

(DP/PN), Windows XP embedded
preinstalled, WinCC flexible RT
(incl. archives/recipes)
preinstalled
Celeron M 1.0 GHz
Celeron M 1.0 GHz with

PROFIBUS DB12

PROFINET
Pentium M 1.4 GHz
Pentium M 1.4 GHz with

PROFIBUS DB12

PROFINET
Main memory
Number of tags 128 PT
With operating system and

HMI/RTX (DP)
Windows XP embedded preinstalled, WinCC flexible RT (incl.
archives/recipes) preinstalled,
WinAC RTX preinstalled and
configured for PROFIBUS
1 GB DDR2 SDRAM
2 GB DDR2 SDRAM
Second CompactFlash slot

fitted (externally accessible)
- Not fitted
- With CF card 2 GB
- With CF card 4 GB
2/7
Siemens AG 2009
Embedded Automation
Ordering data (continued)
Order No.
Order No.
Accessories
Cover for Panel PCs

477/577/677/877
SIMATIC
6AV7 85 7 -0A 7 7 7 - 7 7 A0
For protecting the touch screen

against dirt/scratches
Software Pakete
preinstalled
With 2 GB CF card
3B
With 4 GB CF card
4B

RTX Windows XP embedded
(EN/DE) preinstalled, WinAC
RTX preinstalled and preconfigured for PROFIBUS (DP) or
PROFINET (PN)
for 12" Touch
6AV7 671-2BA00-0AA0
for 15" Touch
6AV7 671-4BA00-0AA0
for 19" Touch
6AV7 672-1CE00-0AA0
Labeling foil for

Panel PCs 477/577/677/877
6AV7 672-0DA00-0AA0
For labeling softkeys and function

keys, blank, supplied in sets of 10
Touch pen
6AV7 672-1JB00-0AA0
Undetachable pen for operation

of the touch devices, mounting of
the support on the control cabinet
With 2 GB CF card
With 4 GB CF card
SIMATIC PC/PG DiagMonitor

V4.0
WinAC RTX (DP) configured

for PROFIBUS
WinAC RTX (PN) configured

for PROFINET
With operating system and HMI

(DP/PN), Windows XP
embedded preinstalled,
WinCC flexible RT (incl.
archives/recipes) preinstalled
6ES7 648-6CA04-0YX0
Software tool for monitoring

SIMATIC PCs,
incl. manual, on CD-ROM
(German/English)
SIMATIC PC
Image Creator V2.1
6ES7 648-6BA02-1YX0
6ES7 648-6AA02-1YX0
6ES7 648-0DC40-0AA0
6FC5 235-0AA05-1AA2
6AV6 671-3AH00-0AX0
Software tool for data backup for

SIMATIC PCs, incl. manual, on
CD-ROM (Eng/Ger/Fr/Sp/It)
With 2 GB CF card
With 4 GB CF card
SIMATIC PC
Partition Creator V2.1
Software tool for hard-disk

partitioning for SIMATIC PCs,
(Eng/Ger/Fr/Sp/It)
SIMATIC PC USB FlashDrive

HMI/RTX (DP)
Windows XP embedded
preinstalled, WinCC flexible
RT (incl. Archives/Recipes)
preinstalled, WinAC RTX
preinstalled and configured
for PROFIBUS
2 GB, USB 2.0, metal enclosure,

bootable
3.5" disk drive, USB
With 1 m connecting cable
Industrial USB Hub 4
With 2 GB CF card
With 4 GB CF card
4 x USB 2.0, IP65 for control

cabinet door or DIN rail
Compact Flash Card
2 GB
6ES7 648-2BF01-0XF0
4 GB
6ES7 648-2BF01-0XG0
Expansion kit PC/104
6AG4 070-0BA00-0XA0

HMI/RTX (PN)
Windows XP embedded
for PROFINET
For integration of PC/104 modules

(packing unit contains 6
expansion frames)
Please note:
With 2 GB CF card
With 4 GB CF card
A) Subject to export regulations: AL: N and ECCN: EAR99H

B) Subject to export regulations: AL: N and ECCN: EAR99S
2/8
The scope of supply of the Panel PC 477B mainly comprises the

Panel PC and a software pack that contains the CompactFlash
card with preinstalled and configured software as well as all the
necessary license keys. After the CompactFlash card has been
inserted in the (internal) slot provided, the unit is ready for
switching on.
Note:
Other complete turnkey solutions (the software is already
installed and configured) on Microbox PC basis can be found
under SIMATIC PC based Control.
Siemens AG 2009
Embedded Automation
SIMATIC MP 177
Overview
Like operator panels, Multi Panels (MP) are used for local
machine operation and monitoring
Message buffer contents and residual WinAC MP data are
retained even when panel is disconnected, without batteries
PLC functionality can be integrated directly into the MP 177
platform as an option
The multi panel can be expanded with the options
Sm@rtService and Sm@rtAccess
Pixel-graphics 5.7" TFT display, color (64k colors)
All interfaces, e.g. MPI, PROFIBUS DP, USB, PROFINET
(Ethernet TCP/IP), are on-board
The MP 177 6" Touch can also be delivered as a package,
complete with a WinAC MP 177. WinCC flexible 2008 Compact
or higher is required for configuring the MP 177.
Ordering data
Order No.
SIMATIC HMI MP 177 6 Touch E

min. WinCC flexible 2008
necessary
6AV6 642-0EA01-3AX0
Paket SIMATIC MP 177 6" Touch
6AV6 651-2JC01-3AA0 available

soon
Consisting of:
SIMATIC MP 177 6 Touch
SIMATIC WinAC MP
Single Lisence for WinAC
MP 177 on USB stick 1)
Order No.
User Manual WinCC flexible
Compact/Standard/Advanced
German
6AV6 691-1AB01-3AA0
English
6AV6 691-1AB01-3AB0
French
6AV6 691-1AB01-3AC0
Italian
6AV6 691-1AB01-3AD0
Spanish
6AV6 691-1AB01-3AE0
User Manual
WinCC flexible Communikation
Electronic documentation for

WinAC MP
German
6AV6 691-1CA01-3AA0
Standard SD card 256 MB

(empty)
English
6AV6 691-1CA01-3AB0
French
6AV6 691-1CA01-3AC0
Configuration
Italian
6AV6 691-1CA01-3AD0
with SIMATIC WinCC flexible
Spanish
6AV6 691-1CA01-3AE0
6AV6 691-1SA01-0AX0
WinCC flexible/Sm@rtAccess
see catalog ST 80
SIMATIC HMI Manual Collection B
WinCC flexible/Sm@rtService
see catalog ST 80
WinAC MP/software PLC
see catalog ST 80
Electronic documentation, on
DVD
German
6AV6 691-1DP02-0AA0
5 languages (English, French,

German, Italian and Spanish);
contains: all currently available
user manuals, manuals and
communication manuals for
SIMATIC HMI
English
6AV6 691-1DP02-0AB0
Accessories
French
6AV6 691-1DP02-0AC0
Italian
6AV6 691-1DP02-0AD0
Accessories for supplementary

ordering
Spanish
6AV6 691-1DP02-0AE0
Documentation (to be ordered separately)

User manual
MP 177 6 Touch
see catalog ST 80

1) Can only be used for license handling
2/9
Siemens AG 2009
Embedded Automation
SIMATIC MP 177
Dimensions
More information
All specifications in mm. Tolerance 1 mm.
Additional information is available in the Internet under:

http://www.siemens.com/mp
MP 177 6" Touch
2/10
44
G_ST80_XX_00366
196
22
212
140
156
Siemens AG 2009
Embedded Automation
Overview
Design
Compact design with low mounting depth
The front is resistant to various oils, greases and standard
detergents
Degree of protection IP65/NEMA 4x/NEMA 12 (front) or IP20
(rear)
Plug-in terminals for 24 V DC power supply
Interfaces:
- RS 485/ RS 422 interface for process connections (PPI, MPI,
PROFIBUS DP up to 12 Mbit/s)
- USB for memory stick, mouse, keyboard, printer, barcode
reader, UPS and downloading/uploading the configuration
- Ethernet (TCP/IP) for exchanging data with a higher-level
PC, connection of a network printer and downloading/
uploading the configuration;
a control link to SIMATIC S7 is possible
Slot for SD/MultiMedia card
Content of message buffer is retained even when panel is
disconnected, without batteries
PLC functionality can be integrated directly into the MP277
platform with Option
additional Windows CE applications (Multi Panel and Panel
options)
SIMATIC MP 277 devices on the basis of Windows CE
combine the rugged construction of Operator Panels with the
flexibility of PCs
Pixel-graphics 7.5" or 10.4" TFT display, color (64k colors)
MP 277 8" and MP 277 10" Touch:
Touch screen (analog/resistive)
MP 277 8" Key:
38 system keys, 26 user-configurable and freely inscribable
function keys (18 with LEDs)
MP 277 10" Key:
The MP 277 is also available with a stainless steel front panel,
and therefore meets the high requirements of, e.g., the food
and beverage industry.
(Ethernet TCP/IP), are onboard
Application
They are used in a wide range of industries and applications
which can be extended by means of the Multi Panel options, e.g.
presentation of HTML documents via Microsoft Pocket Internet
Explorer.
The diskless and fanless design permits their use even where
dust or vibration limits the use of a PC. Short power-up times
mean the Multi Panels are soon ready to use.
Ordering data
Order No.
SIMATIC MP 277
Multi Panel (including installation
accessories) with
8" color TFT display, Touch
6AV6 643-0CB01-1AX1
6AV6 643-0CD01-1AX1
8" color TFT display, keyboard
6AV6 643-0DB01-1AX1
10" color TFT display, keyboard E
6AV6 643-0DD01-1AX1
E
10 color TFT display,
Touch, INOX
(with stainless steel front panel)
6AV6 643-0ED01-2AX0
SIMATIC MP 277 8" Touch

Starter Package
6AV6 652-3MB01-0AA0
6AV6 652-3PB01-0AA0
Consisting of:
SIMATIC WinCC flexible 2007
SIMATIC HMI Manual Collection
Voucher for Software Update
Service for 1 year
MPI cable, 5 m (for download
and test purposes only)
PC/PPI cable (RS 232)
Starter Package
Consisting of:
Service for 1 year
PC/PPI cable (RS 232)
2/11
Siemens AG 2009
Embedded Automation
Ordering data
Order No.
Complete pre-assembled
packages SIMATIC MP 277 with
WinAC MP 2007
Paket MP 277 8" Touch
MP 277 Operating Instructions

E
6AV6 652-3MC01-1AA0
MP 277 8" Touch

Electronic documentation
Single license for MP 277 on
USB stick1)
Standard SD Card (empty)
Paket MP 277 8" Key
6AV6 652-3LC01-1AA0
MP 277 8" Key

USB stick1)
6AV6 652-3PC01-1AA0
MP 277 10" Touch

USB stick1)
Paket MP 277 10" Key
German
6AV6 691-1DJ01-0AA0
English
6AV6 691-1DJ01-0AB0
French
6AV6 691-1DJ01-0AC0
Italian
6AV6 691-1DJ01-0AD0
Spanish
6AV6 691-1DJ01-0AE0
WinCC flexible Compact/

Standard/Advanced
User Manual
German
6AV6 691-1AB01-3AA0
English
6AV6 691-1AB01-3AB0
French
6AV6 691-1AB01-3AC0
Italian
6AV6 691-1AB01-3AD0
Spanish
6AV6 691-1AB01-3AE0
User Manual
WinCC flexible Communication
6AV6 652-3NC01-1AA0
MP 277 10" Key

USB stick1)
see chapter 6
Configuration
Configuration set
Order No.
Documentation
(to be ordered separately)
6AV6 622-0BA01-0AA0
Consisting of:
WinCC flexible Standard
engineering software
German
6AV6 691-1CA01-3AA0
English
6AV6 691-1CA01-3AB0
French
6AV6 691-1CA01-3AC0
Italian
6AV6 691-1CA01-3AD0
Spanish
6AV6 691-1CA01-3AE0
6AV6 691-1SA01-0AX0
Electronic documentation,
on DVD
SIMATIC HMI
Accessories
Documentation DVD,
German, Italian, Spanish)

ordering
see catalog ST 80

RS 232 cable (5 m)
MPI cable, 5 m
Applications/Options
More information
When configuration with WinCC

flexible
WinCC flexible /Sm@rtAccess
see chapter 6
WinCC flexible /Sm@rtService
see chapter 6
WinCC flexible /OPC server
see chapter 6
WinCC flexible /ProAgent
see chapter 6
WinCC flexible /Audit
see chapter 6
WinAC MP 2007 /Software SPS
see ST PC page 2/17
1) Can only be used for license handling
2/12

http://www.siemens.com/mp
Do you need a specific modification or option for the products
described here? Then look up "Customized products", where
you will find information about additional sector-specific
products that can be ordered as well as about options for
customer-specific modification and adaptation.
Siemens AG 2009
Embedded Automation
Dimensions
All specifications in mm, Tolerance 1 mm
240
61
SIMATIC MULTI PANEL
221
205
121
165
47
SIMATIC MULTI PANEL
SIEMENS
180
61
352
47
SIEMENS
225
G_ST80_XX_00286
337
G_ST80_XX_00284
224
MP 277 8" Touch
MP 277 8" Key
483
61
325
289
107
310
263
247
160
43
SIMATIC MULTI PANEL
10
SIMATIC MULTI PANEL
SIEMENS
SIEMENS
55
MP 277 10" Touch
260
432
G_ST80_XX_00287
77
20
G_ST80_XX_00285
309
260
MP 277 10" Key
61
325
263
247
160
43
SIMATIC MULTI PANEL
SIEMENS
20
G_ST80_XX_00285
309
260
MP 277 10" Touch with stainless-steel front

2/13
Siemens AG 2009
Embedded Automation
SIMATIC MP 377
Overview
Application
The Multi Panels SIMATIC MP 377 can be used wherever
machines and systems are operated and monitored directly
on-site whether in production, process or building automation.
These are used in the most popular branches and applications
and can be expanded in their applications with the Multi Panel
options, e.g. by displaying HTML documents via the Microsoft
Pocket Internet Explorer.
Windows CE meets the basic prerequisites for application in

rough industrial environments. The diskless and fanless design
enables implementation in areas where high vibration or dust
load limits the operation of a PC. Short boot-up times make the
Multi Panels ready for operation sooner as well.
Design
additional Windows CE applications (Multi Panel and Panel
options)
SIMATIC MP 377 devices on the basis of Windows CE
combine the rugged construction of Operator Panels with the
flexibility of PCs
PLC functionality can be integrated directly into the MP 377
platform with Option
Pixel-graphics 12.1" or 15" or 19" TFT display, color
(64k colors)
MP 377 12" Touch, MP 377 15" Touch and MP 377 19" Touch:
MP 377 12" Key:
SIMATIC MP 377 INOX 15 Touch (stainless-steel front):
The MP 377 15" Touch is also available with a stainless steel
front (DIN EN 1672-2) and as Fully Enclosed HMI (IP65).
These versions expand the application area of the Multi Panel
377 for special applications, ambient conditions, and special
sectors (e.g. food, beverages and tobacco industries).
SIMATIC MP 377 PRO 15" Touch:
with a rugged and extremely compact aluminum housing, full
IP65 protection and thus suitable for harsh environmental
conditions.
(Ethernet TCP/IP), are on-board
2/14
Compact design with low mounting depth

The front is resistant to various oils, greases and standard
detergents
Degree of protection IP65/NEMA 4x/NEMA 12 (front) or IP20
(rear)
Plug-in terminals for 24 V DC power supply
Interfaces:
- RS 485/RS 422 interface for process connections
(MPI, PROFIBUS DP up to 12 Mbit/s)
- USB for mouse, keyboard, printer, barcode reader, and
downloading/uploading the configuration
- Ethernet (TCP/IP) for exchanging data with a higher-level
PC, connection of a network printer and downloading/
uploading the configuration; a control link to SIMATIC S7 is
possible
Slot for Compact Flash Card (CF Card)
Slot for SD/Multi Media Card
Retentive memory for WinAC MP 377 data (data, timers,
counters and bit memories)
SIMATIC MP 377 PRO 15 Touch
The MP 377 is also available in a support arm version
All-round IP65 protection
NEMA 4 certification
For mounting on support arm/pedestal
15" touch display
Rugged die-cast aluminum housing
Adaptation of the device optionally from above or below
Direct connection to support arm systems of well-known
manufacturers (e.g. Rittal, Bernstein, Rose, Rolec)
Supports the globally established VESA 75/VESA 100
standard
Siemens AG 2009
Embedded Automation
SIMATIC MP 377
Ordering data
Order No.
Order No.
Complete pre-assembled packages SIMATIC MP 377 with WinAC MP
2007 (continued)
SIMATIC MP 377
Multi Panel (including installation
accessories) with
E
12" color TFT display, keyboard E
E
E
15" color TFT display, Touch with
stainless-steel front
E
PRO 15 color TFT display,
Touch 2) incl. mounting
accessories
6AV6 644-0AA01-2AX0
6AV6 644-0BA01-2AX1
6AV6 644-0AB01-2AX0
6AV6 644-0AC01-2AX0
6AV6 644-0CB01-2AX0
6AV6 644-2AB01-2AX0
6AV6 652-4HC01-2AA0
Applications/Options
when configuring with
WinCC flexible
see catalog ST 80
Configuring
WinCC flexible /Sm@rtAccess
see catalog ST 80
WinCC flexible /Sm@rtService
see catalog ST 80
WinCC flexible /OPC server
see catalog ST 80
Consisting of:
see catalog ST 80

engineering software
Documentation DVD, 5 languages
(English, French, German,
Italian, Spanish)
RS 232 cable (5 m)
WinAC MP 2007 / Software SPS
see catalog ST 80
Projektierungsset MP 377
6AV6 622-0BA01-0AA0
Documentation (to be ordered separately)

MP 377 Operating Instructions
German
6AV6 691-1DR01-0AA0
English
6AV6 691-1DR01-0AB0
French
6AV6 691-1DR01-0AC0
Starter packages
Italian
6AV6 691-1DR01-0AD0

Starter Package
Spanish
6AV6 691-1DR01-0AE0
6AV6 652-4FA01-0AA0
WinCC flexible Compact/

Standard/Advanced
User Manual
comprising:
SIMATIC MP 377 12" TOUCH
SIMATIC WINCC flexible
STANDARD 2008
Service for 1 year
Starter Package
6AV6 652-4GA01-0AA0
German
6AV6 691-1AB01-3AA0
English
6AV6 691-1AB01-3AB0
French
6AV6 691-1AB01-3AC0
Italian
6AV6 691-1AB01-3AD0
Spanish
6AV6 691-1AB01-3AE0
User Manual
comprising:
German
6AV6 691-1CA01-3AA0
SIMATIC MP 377 15" TOUCH

SIMATIC WINCC flexible
STANDARD 2008
Service for 1 year
English
6AV6 691-1CA01-3AB0
French
6AV6 691-1CA01-3AC0
Italian
6AV6 691-1CA01-3AD0
Spanish
6AV6 691-1CA01-3AE0
6AV6 691-1SA01-0AX0
Complete pre-assembled packages SIMATIC MP 377 with

WinAC MP 2007
6AV6 652-4FC01-2AA0
MP 377 12" Touch

Single license for MP 377 on USB
stick1)
Standard Multimedia Card (empty)
Paket MP 377 12" Key
MP 377 15" Touch

stick1)
Electronic documentation,
on DVD
SIMATIC HMI
Accessories
6AV6 652-4EC01-2AA0
MP 377 12" Key

stick1)
MP 377 19" Touch

stick1)
6AV6 652-4GC01-2AA0

ordering
see Catalog ST 80
1) For license handling only

2) An adapter set is required for mounting; for more information
see Catalog ST 80
2/15
Siemens AG 2009
Embedded Automation
SIMATIC MP 377
38
20
Dimensions
310
73
288
92
310
288
400
32
483
30
10
72
59
366
448
295
G_ST80_XX_00311
300
G_ST80_XX_00309
58
35
MP 377 12 Key
MP 377 15 Touch
53
310
247
275
17
400
30
335
72
98.5
MP 377 12 Touch
G_ST80_XX_00351
67.85
G_ST80_XX_00310
309
124
288
73
400
378
310
77
38
MP 377 PRO 15
400
30
72
366
11
35
295
G_ST80_XX_00311
34
483
75
447
295
G_ST80_XX_00312
54
MP 377 19" Touch
2/16
MP 377 15" Touch with stainless-steel front
Siemens AG 2009
Embedded Automation
SIMATIC WinAC MP
Overview
Application
The WinAC MP is a new, rugged software PLC for all SIMATIC
HMI Multi Panel platforms. It has been developed for smaller and
medium-sized applications that do not depend on the last millisecond and costs are in the forefront. The WinAC uses proven
tools such as STEP 7 (V5.4/SP1 or higher) and WinCC flexible
(Standard or higher as of version 2007). This makes it possible
to upgrade or switch without any extra training for new tools.
The operator interface of the WinAC MP is included. Users can
thus copy the required operator controls into their project. Of
course, all operator functions of the WinAC MP are available in
the function list after installing the option on the configuration
computer in WinCC flexible (as of version 2007)! The peripherals
are connected via PROFIBUS DP. Here, ET I/O modules up to
technology modules are available.
Processing WinCC flexible projects
WinCC flexible projects are processed with WinCC flexible 2007
(as of the Standard version) and STEP 7 V5.4 from SP 1.
WinAC MP, the software PLC based on Windows CE

An optimized version is available for all current MP platforms
The economical solution for all applications in combination
with a rugged hardware platform
Ideal for tasks on the machine level, saves space and costs
Best service concept, backup/restore of all data on a standard
SD card, standard Multi Media Card or standard USB stick
If WinCC flexible is integrated and operated in STEP 7, a common database offers the highest degree of programming comfort, which ensures an optimal continuity when creating your applications. Program faults are therefore avoided from the outset.
Service concept
All data, operating systems, HMI data, PLC data, archives, recipes, licenses, etc., can be stored on a standard memory
medium1) with the press of a button. The only exception is the
content of the M-RAM memory (current status of bit memories,
timers, counters and data blocks). This is not necessary for the
restore procedure, however. The function Backup/Restore therefore offers an extensive and perfect service concept.
1) Memory media released by Siemens are preferred
2/17
Siemens AG 2009
Embedded Automation
SIMATIC WinAC MP
Ordering data
Order No.
6ES7 671-4EE00-0YA0
WinAC MP,
version WinAC MP 177 2)
incl.a single license for

MP 177 on USB stick1) and
electronic documentation
WinAC MP,
6ES7 671-5EF00-0YA0
incl. a single license for MP 277

on USB stick1) and electronic
documentation
WinAC MP,
6ES7 671-7EG00-0YA0
Complete pre-assembled packages

Package SIMATIC MP 177 6"
Touch
6AV6 651-2JC01-3AA0
SIMATIC WinAC MP
single license for WinAC
MP 177 on USB stick 1)
Electronic documentation for
WinAC MP
Package MP 377 12" Key
Standard SD Card 256 MB

(empty)
E
6AV6 652-3MC01-1AA0
MP 277 8" Touch

WinAC MP Version 277
USB stick1)
(empty)
6AV6 652-3NC01-1AA0
6AV6 652-4FC01-2AA0
6AV6 652-4EC01-2AA0
6AV6 652-4GC01-2AA0
6AV6 652-4HC01-2AA0
MP 377 12" Key

USB stick1)
(empty)
Package MP 377 15" Touch
6AV6 652-3LC01-1AA0
MP 277 8" Key

USB stick1)
(empty)
MP 377 15" Touch

USB stick1)
(empty)
MP 377 19" Touch
USB stick1)
(empty)
1)
2)
B)
E)
2/18
MP 377 12" Touch

USB stick1)
(empty)
SIMATIC MP 177 6 Touch
6AV6 652-3PC01-1AA0
MP 277 10" Key

USB stick1)
(empty)
comprising:
MP 277 10" Touch

USB stick1)
(empty)
incl. a single license for MP 377

on USB stick1) and electronic
documentation
Order No.
Can only be used for license handling

UCL version on request
Subject to export regulations: AL: N and ECCN: EAR99S
Subject to export regulations: AL: N and ECCN: 5D002ENC3
Siemens AG 2009
Embedded Automation
SIMATIC THIN CLIENT
Overview
Design
SIMATIC THIN CLIENT is installation-compatible with the Multi
Panels MP 277 (10") and MP 377 (12" and 15").
The device has degree of protection IP54 (splash-proof),
enclosure type 12 (indoor use only) and can be expanded with
an options package to degree of protection IP65 (protected
against water jets), enclosure type 4x/type 12 (indoor use only).
SIMATIC THIN CLIENT is another member of the SIMATIC Panel

family. Its extremely rugged hardware makes it ideal for industrial
use.
The following versions are available:
The rack-mounting versions SIMATIC THIN CLIENT 10" Touch
and SIMATIC THIN CLIENT 15" Touch.
The support arm version SIMATIC THIN CLIENT PRO 15"
Touch with a rugged and very compact aluminum enclosure
which is completely IP65 protected and therefore suitable for
harsh ambient conditions.
Benefits
The SIMATIC THIN CLIENT is a very economical way of running
a user station on-site on the machine. Typical application
instances are a second station (WinCC flexible with
Sm@rtAccess) in connection with another SIMATIC Panel or
Panel PC.
Overcoming greater distances as remote operation terminal is
enabled by using the existing Ethernet network.
The possibility of using SCADA and Office functionality (e.g.
WinCC, SAP, MS-Excel) directly on the machine on-site supports
the vertical integration of the data flow from host systems down
to the machine level (e.g. warehouse utilization).
The SIMATIC THIN CLIENT communicates via SmartAccess or
the Standard RDP (Remote Desktop Protocol) by Microsoft with
a host (SIMATIC Panel, Panel PC or Server) and does not itself
require any installations, licenses or additional software on the
THIN CLIENT.
In addition, the SIMATIC THIN CLIENT has the following

features:
Ethernet interface for operating on PROFINET and Ethernet
networks (with Auto-Cross-Over function for one-to-one
connections between server and client via Ethernet cable)
TFT screen with 64K colors
Resolution:
- 640 x 480 pixels (10")
- 1024 x 768 pixels (15")
SIMATIC THIN CLIENT can operate as
- Terminal Client (Sm@rtAccess and RDP) and as
- WEB-Client (HTML)
A mouse and a keyboard can be operated on the USB
interface as external input media. The USB interface supports
the industrial USB Hub 4.
Printer and storage media are controlled via the host device
The new THIN CLIENT devices support automatic parameter
definition with DHCP. As an alternative, you can also assign IP
addresses manually. The PROFINET basic services (Lifelist,
Topology view) are supported.
The SIMATIC THIN CLIENT has been available since Q3/2007 as
an especially cost-effective solution.
THIN CLIENT PRO 15" Touch
The THIN CLIENT is also available in a support arm version:
All-round IP65 protection
Enclosure type 4x/type 12 (indoor use only)
15" touch display
Rugged die-cast aluminum housing
standard
2/19
Siemens AG 2009
Embedded Automation
SIMATIC THIN CLIENT
Mode of operation
Integration
Operation is possible via Touch or with a keyboard or mouse

connected to a USB port. SIMATIC THIN CLIENT uses a 64K
color display, a USB and an Ethernet interface.
Both devices are compatible with the Multi Panels of corresponding size with regard to mounting cut-out and design.
The RDP connection can be used for operating SCADA systems

such as WinCC as well as office applications such as MS Excel
or SAP direct on the THIN CLIENT at the machine on-site. Unlike
Office viewers under Windows CE, data writing processes are
also possible. RDP is a Microsoft standard protocol that is
supported by all Windows operating systems. This makes it possible to visualize systems from other manufacturers on the
SIMATIC THIN CLIENT and to link them into the system in this
way.
The device is ideal as a second work station for larger systems

because of the low price. Sm@rtAccess enables the connection
with a WinCC flexible station. As a remote work station, the
device can be run on machines with extremely high demands on
mechanical robustness (e.g. vibration resistance).
SIMATIC THIN CLIENT can be operated in all systems in a

PROFINET network or in Ethernet networks. As an alternative, a
one-to-one connection with the host is also possible with an
Ethernet cable. In this way, distances of 100 meters (with a
switch even greater distances are possible) can be bridged,
which means a clear cost reduction compared with the standard
remote operator fronts via USB/DVI cable.
Function
Commissioning is very simple. SIMATIC THIN CLIENT only
needs an IP address and a host device that it can communicate
with. It does not require any local software installations or configuration. There is thus no need to backup/restore or update the
projects and total costs of ownership are significantly reduced.
Technical specifications
SIMATIC THIN CLIENT
10" Touch
15" Touch
PRO 15" Touch
Supply voltage
24 V DC
24 V DC
24 V DC
permissible range
+19.2 V to +28.8 V DC
+19.2 V to +28.8 V DC
+19.2 V to +28.8 V DC
Flash / RAM
Flash / RAM
Flash / RAM
No info
No info
Supply voltage
Memory
Type of storage
Type
Memory usable for project data No info

Protocols
Protocols (terminal link)
Sm@rtAccess
Yes
Yes
Yes
RDP
Yes
Yes
Yes
LLDP
Yes
Yes
Yes
HTTP
Yes
Yes
Yes
XML
Yes
Yes
Yes
HTML
Yes
Yes
Yes
CSS
Yes
Yes
Yes
Java Script
Yes
Yes
Yes
Display type
TFT, 65 536 colors
TFT, 65 536 colors
TFT, 65 536 colors
Size
10.4"
15.1"
15.1"
Resolution (W x H in pixel)
640 x 480
1 024 x 768
1 024 x 768
MTBF backlighting (at 25 C)
about 50,000 hours
about 50,000 hours
about 50,000 hours
Operating elements
Touch screen
Touch screen
Touch screen
Touchscreen
analog, resistive
analog, resistive
analog, resistive
Connection for mouse/

keyboard/barcode reader
USB / USB
USB / USB
USB / USB
Yes; EN 61000-6-4, interference

emission: Intended for use in
industrial areas.

industrial areas.

industrial areas.
WEB characteristics
Display
Operating mode
EMC
Emission of radio interferences
to EN 55 011 (limit class A)
2/20
Siemens AG 2009
Embedded Automation
SIMATIC THIN CLIENT
Technical specifications (continued)

SIMATIC THIN CLIENT
10" Touch
15" Touch
PRO 15" Touch
Front
IP54 when installed, Enclosure

type 12 (indoor use only);
optionally IP65, Enclosure type
4X/Enclosure type 12 (indoor use
only) (6AV6671-6AP00-0AX0)
IP54 when installed, Enclosure

type 12 (indoor use only);
optionally IP65, Enclosure type
4X/Enclosure type 12 (indoor use
only) (6AV6671-6AP00-0AX0)
Complete unit IP65, Enclosure type

4X/type12 (indoor use only)
Rear
IP20
IP20
Complete unit IP65, Enclosure type

4X/type12 (indoor use only)
CE, cULus, C-Tick
CE, cULus, C-Tick
CE, cULus, C-Tick
Max. permissible tilt angle

without external ventilation
+/- 35
+/- 35
+/- 45
Max. relative humidity (in %)
85 %; (Storage)
85 %; (Storage)
85 %; (Storage)
Operation (vertical installation) 0 C to +50 C
0 C to +50 C
0 C to +45 C
Transport, storage
-20 C to +60 C
-20 C to +60 C
-20 C to +60 C
USB
1 x USB
1 x USB
1 x USB
Ethernet
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
ARM, 266 MHz
ARM, 266 MHz
ARM, 266 MHz
Front of enclosure (W x H)
325 mm x 263 mm
400 mm x 310 mm
400 mm x 310 mm
Mounting cutout/Device depth

(W x H/D) in mm
310 mm x 248 mm/65 mm

device depth
368 mm x 290 mm/65 mm

device depth
2.2 kg
3.6 kg
6.5 kg
Degree of protection
Certifications & Standards

Certifications
Ambient conditions
Temperature
Interfaces
Processor
Processor
Dimensions
Weights
Weight
Ordering data
Order No.
SIMATIC THIN CLIENT
Order No.
Option packages:
10" touch device
6AV6 646-0AA21-2AX0
15" touch device
6AV6 646-0AB21-2AX0
PRO 15" Touch device 1)
6AV6 646-2AB21-2AX0
Starter packages:
SIMATIC THIN CLIENT with
Sm@rtAccess
IP65 set (upgrade from

IP54 to IP65)
6AV6 671-6AP00-0AX0
Cover foil 10"
6AV6 671-3DC00-0AX0
Cover foil 15"
6AV6 574-1AD00-4EX0
Protective cover 10"
6AV6 671-3CK00-0AX0
for HMI accessories see
also catalog ST 80
(License to operate SmartAccess

on the server)
Touch device 10" with
Sm@rtAccess license (panels)
6AV6 653-6AA01-2AA0
Touch device 15" with

Sm@rtAccess license (panels)
6AV6 653-6BA01-2AA0
1) An adapter set is required for mounting,

see Catalog ST 80, chapter 8 "Fully enclosed HMI units"
2/21
Siemens AG 2009
Embedded Automation
SIMATIC THIN CLIENT
Dimensions
All specifications in mm. Tolerance 1 mm.
59.9
6.2
400
59.9
6.2
288
113.59
63.21
106.71
310
247
30
30
309
366
G_ST80_XX_00305
232.49
SIMATIC THIN CLIENT 10" Touch
232.49
G_ST80_XX_00306
263
113.59
325
SIMATIC THIN CLIENT 15 Touch
More information
400
Contact
Support Request:
http://www.siemens.com/automation/support-request
310
Internet:
http://www.siemens.com/automation/service&support
G_ST80_XX_00350
67.85
90.85
THIN CLIENT PRO 15 Touch
7
2/22
Siemens AG 2009
Industrial PC
3/2
3/3
Introduction
Connection options
3/5
3/7
3/12
3/16
SIMATIC Rack PC
SIMATIC Rack PC 547B
3/20
3/22
3/26
3/30
SIMATIC Box PC
SIMATIC Microbox PC 427B
SIMATIC Box PC 627B
SIMATIC Box PC 827B
3/35
3/37
3/43
3/46
SIMATIC Panel PC
SIMATIC Panel PC 477B embedded
SIMATIC Panel PC 577B
SIMATIC Panel PC 677B (incl. INOX)
3/52
SIMATIC HMI packages with

WinCC flexible and WinCC
HMI packages with WinCC flexbile
and WinCC
3/52
3/54
3/54
3/56
3/57
3/59
3/61
3/63
3/66
3/66
Customized SIMATIC PC
Customized SIMATIC Rack PC and Box PC
SIMATIC PC function cards
Customized Automation
for SIMATIC Panel PC
Panel PC 677B 46"
Backplane cover
Mobile Panel 12" IWLAN
RMOS3 real-time operating system
RMOS3 V3.50
real-time operating system
3/70
3/72
3/73
3/74
3/76
3/77
3/78
3/79
3/81
3/82
SIMATIC PC DiagMonitor
SIMATIC PC Bios Manager
SIMATIC PC Image Creator
SIMATIC PC Partition Creator
ADDM Data Management
SIMATIC PC CompactFlash
PC I/O modules
Panel PC Remote Kit
3/83
DC UPS uninterruptible power

supplies
SITOP DC UPS Software
SITOP DC UPS modules 6 A/15 A/40 A
SITOP battery modules
3/85
3/86
3/87
3/87
3/88
AC UPS uninterruptible power

supplies
SITOP UPS500S
MASTERGUARD
Siemens AG 2009
Industrial PC
Introduction
Overview
Benefits
Professional automation solutions place a wide range of different

requirements on the industrial PCs used (vibration, cold, dust,
heat, steam) year in, year out and round the clock. SIMATIC PCs
are the ideal industry-standard PC platforms for this purpose.
SIMATIC PC offers
High degree of investment protection
Best industrial functionality
A broad range of designs are available for various applications:
SIMATIC Rack PC
Flexible, high-performance industrial PC for installation in 19"
racks.
SIMATIC Box PC
Compact, rugged industrial PC for universal installation.
SIMATIC Panel PC
Rugged, high-performance industrial PC with brilliant display.
SIMATIC PCs can be individually configured and further customer requirements, such as design, hardware expansions, can
be implemented on a project-specific basis.
For individual expansion of the system availability, expansion
components that are matched to one another are available.
SIMATIC PC the more industrial PC
3/2
Ruggedness and industrial compatibility for 24-hour

continuous use in an industrial environment
Compact, space-saving enclosure (SIMATIC Box PC and
SIMATIC Panel PC)
Suitable for installing in space-saving control cabinets, only
500 mm deep (SIMATIC Rack PC)
All-metal enclosure with a high degree of electromagnetic
compatibility for use in industrial areas and in domestic,
business and commercial environments and for a degree of
protection up to IP65/NEMA 4
The mounting position of the devices can be varied by means
of wall, upright or control cabinet mounting (SIMATIC Box PC),
rail mounting (SIMATIC Microbox PC 427B only) and horizontal or vertical mounting position in the19" cabinet with appropriate kit as an industrial tower PC (SIMATIC Rack PC).
High resistance to shock/vibration thanks to special hard disk
mountings, locked connectors, and card retainers
Maintenance-free through fanless construction and use of
SIMATIC CompactFlash Cards (SIMATIC Microbox PC 427B
and SIMATIC Panel PC 477 embedded)
Service-friendly, modular device design for replacement of
defective components
Integral industrial power supplies (according to NAMUR) for
the safe power supply protected against system disturbances
Attractive product design with dirt-repelling fronts and coated
surfaces
Dust protection thanks to a pressurized cooling concept,
front-mounted fans and dust filters (SIMATIC Rack PC)
Reduction in standstill times thanks to high system
availability
Assured 24-hour operation as a result of high-quality parts
and components (high MTBF, speed-controlled fans)
Efficient self-diagnostics for avoidance of potential failures
(front status LEDs, SIMATIC PC DiagMonitor diagnostics software for condition monitoring, local and remote)
Minimum downtimes thanks to mirror disk systems and
preventive data backup with SIMATIC PC Image Creator and
SIMATIC PC BIOS Manager
Restore CD/DVD for restoration of the delivery state
Installed and activated Microsoft operating systems for time
savings during installation
High degree of investment security for long-term
automation concepts
Availability of 3 to 5 years
(at least 1.5 years for Rack PC 547B and Panel PC 577B)
5-year repair and spare parts service (3 years for Rack PC
547B and Panel PC 577B) after expiry of the active marketing
period
Long-term concepts are implementable and reduce future
engineering costs
System-tested SIMATIC software (WinCC, WinAC, etc.) and
connection options for distributed I/Os via an optional
PROFIBUS interface on board link the industrial PCs with
Certificates for worldwide marketing (cULus), the CE mark for
use in industrial areas and in domestic, business and commercial environments
Compatibility in hardware and software thanks to, for example,
unchanged mechanical dimensions or the use of existing user
software on all devices of the same generation
Worldwide service and support
(e.g. 24-hour SIMATIC Hotline)
Siemens AG 2009
Industrial PC
Connection options
Overview
The operating systems listed in the table refer exclusively to the
communication products specified!
Please refer to the description of the relevant IPC for the operating system that is available and has been released for that IPC.
(PEHGGHG6\VWHPV

%R[3&%

3DQHO3&%
3DQHO3&%
0LFURER[%
:LQGRZV;3(PEHGGHG
6363)3
%R[3&%
6,0$7,&,QGXVWULDO3&
0LFURER[%
%R[3&%
5DFN3&%3DQHO3&%
2S
V\V
5DFN3&%
6,0$7,&,QGXVWULDO3&
)LHOG3*
)LHOG3*0
9LVWD%XVLQHVV8OWLPDWH63
RWKHURSHUDWLQJV\VWHPV
:LQGRZVVHUYHU
2SHUDWLQJV\VWHPHQYLURQPHQW
RIFRPPXQLFDWLRQVVRIWZDUH
:LQGRZV6HUYHU563
&RPPXQLFDWLRQVVRIWZDUH
:LQGRZV;33UR63
&RPPXQLFD
WLRQVKDUGZDUH
&3VDQGVRIWZDUHIRU,QGXVWULDO(WKHUQHW
&3$
3&,ELW
&3
3&,H[
6,0$7,&3*3&
ZLWKLQWHJUDO
(WKHUQHW
LQWHUIDFH
6

65('&211(&7
6
65('&211(&7
62)71(76
62)71(76/HDQ
62)71(73*
'.[[31,29
'.[[31,29

-
-
-
-

-
-

-
-
-
-
-
&3VDQGVRIWZDUHIRU352),1(7
&3
3&3OXV
6,0$7,&3*3&
ZLWKLQWHJUDO
(WKHUQHW
LQWHUIDFH
62)71(731,2
31&%$23&VHUYHU

1) Use of these CPs requires porting of the Development Kit DK-16xx PN IO to the
relevant operating system environment. You can order the DK-16xx PN IO on
the Internet at www.siemens.de/simatic-net/dk16xx. It contains sample software
for Linux Suse 10 and Windows XP Professional. IRT operation requires an
exclusive interrupt, which is not available in all expansion slots. In the case of SIMATIC Industrial PC versions and integrated PROFINET interface, the additional
use of CP 1616/CP 1604 has not been released.
2) The use of these CPs in other operating system environments requires the
porting of the development kit DK-5613 into the respective operating system
environment. You can order the DK-5613 on the Internet at
www.siemens.de/simatic-net/dk5613.
3) integrated PROFIBUS interface is optional
4) may be possible with restrictions, depending on the memory expansion and processor performance.
5) integrated PROFIBUS interface is optional in some cases
6) requires at least 2 PCI or 2 PCIe slots (4-way redundancy requires
4 free PCI or 4 PCIe slots!); hybrid configurations with CP 1613 A2 (PCI) and CP
1623 (PCIe) are possible, depending on PC configuration
7) not possible for 677B in version with 1x PCI or 1x PCIe slot
8) no 4-way redundancy, as only 2 slots available
9) depending on the slots of the selected PC version
10) with SOFTNET PN IO Linux
-
Instructions
- In each case, please pay attention to the specified
boundary conditions of use for the SIMATIC NET products. These can be found on the Internet pages shown
below.
- for further details on XP Embedded, see http://support.
automation.siemens.com/WW/view/de/21661041
- further details relating to system requirements and operating environments can be found in the readme file of the
communications products on the SIMATIC NET PC CD,
Software Edition 2008 http://support.automation.siemens.
com/WW/view/de/31675909
- Updates and supplements to catalog entries as well as
updates to the above table can be viewed at http://www.
siemens.com/simatic-net/ik-info
suitable
not suitable
suitable under
certain conditions
with SIMATIC NET-CD

Edition 2008
*B,.B;;B
&3
3&,ELW
Connection options for Industrial Ethernet communications moduels to SIMATIC PCs
3/3
Siemens AG 2009
Industrial PC
Connection options
(PEHGGHG6\VWHPV
&3
3&,
'3
6
)06
62)71(7'3
62)71(7'3VODYH
62)71(76

60RGXODU(PEHGGHG&RQWUROOHU
ZLWK&3
%R[3&%
3DQHO3&%
3DQHO3&%ZLWK&3
0LFURER[%ZLWK&3
'.'3EDVH
:LQGRZV;3(PEHGGHG
6363)3ZLWK&3
0LFURER[%ZLWK&3
%R[3&%
%R[3&%
6,0$7,&,QGXVWULDO3&
5DFN3&%3DQHO3&%
2S
V\V
5DFN3&%
&3ZLWK'3%DVH
)LHOG3*0
&3$
&3)2
&3$
3&,ELW
:LQGRZVVHUYHU
2SHUDWLQJV\VWHPHQYLURQPHQW 6,0$7,&,QGXVWULDO3&
)LHOG3*
:LQGRZV6HUYHU563
:LQGRZV;33UR63
&RPPXQLFD
WLRQVKDUGZDUH

&3VDQGVRIWZDUHIRU352),%86
&3
3&,H[
&3
&DUGEXVELW
6,0$7,&3*3&
ZLWKLQWHJUDO
352),%86
,QWHUIDFH
62)71(7'3
62)71(7'3VODYH
62)71(76
62)71(7'3
62)71(7'3VODYH
62)71(76
62)71(7'3
62)71(7'3VODYH
62)71(76
1) Use of these CPs requires porting of the Development Kit DK-16xx PN IO to

the respective operating system environment. You can order
the DK-16xx PN IO on the Internet at www.siemens.de/simatic-net/dk16xx. It
contains sample software for Linux Suse 10 and Windows XP Professional. IRT operation requires an exclusive interrupt, which is not available
in all expansion slots. In the case of SIMATIC Industrial PC versions and integrated PROFINET interface, the additional use of CP 1616/CP 1604 has not
been released.
2) Use of these CPs in other operating system environment requires porting of the
Development Kit DK-5613 into the relevant operating system environment. You
can order the DK-5613 on the Internet at
3) Integrated PROFIBUS interface is optional
4) May be possible with restrictions, depending on the memory expansion and
processor performance.
5) Integrated PROFIBUS interface is optional in some cases
6) Requires at least 2 PCI or 2 PCIe slots (4-way redundancy requires
4 free PCI or 4 PCIe slots!); hybrid configurations with CP 1613 A2 (PCI) and
CP 1623 (PCIe) are possible, depending on PC configuration
7) Not possible for 677B in version with 1x PCI or 1x PCIe slot
8) No 4-way redundancy, as only 2 slots available
9) Depending on the slots of the selected PC version
Connection options for PROFIBUS communications modules to SIMATIC PCs
3/4
-
-
-
-

-
-
-
-
-

-
-
-
-
Instructions
boundary conditions of use for the SIMATIC NET products.
These can be found on the Internet pages shown below.
- For further details on XP Embedded, see http://support.automation.siemens.com/WW/view/de/21661041
- Further details relating to system requirements and operating
environments can be found in the readme file of the communications products on the SIMATIC NET PC CD, Software Edition 2008 http://support.automation.siemens.com/WW/view/
de/31675909
updates to the above table can be viewed at http://www.siemens.com/simatic-net/ik-info
n
n
n
n
n

-
not suitable
suitable under
certain conditions
with SIMATIC NETCD Edition 2008
*B,.B;;B
&3$
3&,ELW

Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Introduction
Overview
maximum performance at an attractive price with Intel Core
2 Duo technology
Maximum processor performance in maximum configuration
without loss of power (throttling) at ambient temperatures of up
to 40 C
Hard disks with capacities up to 250 GB for large volumes of
data
Low noise output thanks to controlled fan
Status and alarm LEDs at the front for signaling critical alarm
states
Availability at least 1.5 years
Guaranteed spare parts availability for at least 3 years
SIMATIC Rack PCs provide flexible, high-availability industrial

PC systems for powerful yet compact applications using 19"
technology.
Three device classes are available for different requirements:
SIMATIC Rack PC 547B maximum performance at an
attractive price with Intel Core 2 Duo technology
SIMATIC Rack PC 647B - maximum compactness for excellent industrial functionality with Intel Core 2 Duo technology
SIMATIC Rack PC 847B maximum expandability for excellent industrial functionality with Intel Core 2 Duo technology
Shared functions
Maximum system performance for complex automation tasks
in the industrial environment through use of Intel Core 2 Duo
processors
Designed for 24-hour continuous operation
Monitoring and diagnostics functions (e.g. temperature, fan,
watchdog)
RAID1 configuration (mirrored drives), optionally in "hot swap"
frames
Compact dimensions for installation in control cabinets only
500 mm deep
Dust protection thanks to overpressure ventilation concept
with fan on the front and dust filter
Lockable front panel or front door
Service-friendly equipment design due to prepared telescopic
rail mounting
Universal implementation as an industrial workstation or
server
Operating system preinstalled and activated for fast startup
Fast restoration of the delivery status of the HDD thanks to
restore DVD
High flexibility and expandability of components
PCI and PCI-Express expansion slots
Independent industrial product design

maximum compactness for excellent industrial functionality
with Intel Core 2 Duo technology
Maximum compactness with up to 3 free PCI/PCI Express
slots for installing long expansion cards and
integrated interfaces for communication, e.g. integrated
PROFIBUS/MPI or PROFINET interface
Maximum thermal stability up to 50 C ambient temperature
even at maximum processor performance
High vibration/shock resistance thanks to special hard disk
holders
Service-friendly device design due, for example, to the replacement of filters/fans from front without the need for tools or
the opening of the enclosure with just one screw.
Front LED concept for efficient self-diagnostics, e.g. monitoring of the hard disks in RAID1 configurators, fans or the status
display for Ethernet, Profinet and Profibus.
Integrated PROFIBUS DP/MPI or PROFINET interface
(optional)
High continuity of the components/design
Motherboard developed and manufactured by Siemens
3 to 5 years availability
maximum expandability for excellent industrial functionality
with Intel Core 2 Duo technology
Maximum expandability due to 11 free PCI/PCI Express slots
for installing long expansion cards and integrated interfaces
for communication, e.g. integrated PROFIBUS/MPI or
PROFINET interface
High thermal stability up to 50 C even at maximum processor
performance
High vibration/shock resistance thanks to special hard disk
holders
Service-friendly device design due, for example, to the replacement of filters/fans from front without the need for tools or
the opening of the enclosure with just one screw.
Front LED concept for efficient self-diagnostics, e.g. monitoring of the hard disks in RAID1 configurators, fans or the status
display for Ethernet, PROFINET and PROFIBUS.
Integrated PROFIBUS DP/MPI interface (optional)
3 to 5 years availability
3/5
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Introduction
Design
19 rack
Prepared for telescopic rails
Horizontal/vertical installation
19" fixing bracket can be
removed from outside
Tower Kit (optional)
General features
Processor
Main memory
Slots for expansions
(all long)
Onboard graphics
Graphics card (optional)
4HU
2HU
4HU
Intel Core 2 Duo E6600, 2.4 GHz,

1066 MHz FSB
Intel Core 2 Duo E4300, 1.8 GHz,
800 MHz FSB
Intel Celeron 440, 2.0 GHz,
800 MHz FSB
512 MB, expandable up to 4 GB
4 x PCI
1 x PCI-Express x16
2 x PCI-Express x1
1x VGA
Intel Core 2 Duo T7400, 2.16 GHz,

667 MHz FSB
667 MHz FSB
Intel Celeron M 440, 1.86 GHz,
533 MHz FSB
2 x PCI
1 x PCI-Express x16
Preinstalled/supplied on
Restore DVD
Windows 2000 Professional

Multi-Language
Windows XP Professional
Multi-Language
Windows Vista Ultimate
Mutli-Language
Windows Server 2003
incl. 5 Client Multi-Language

Multi-Language
Multi-Language Windows Vista
Ultimate Mutli-Language
Windows Server 2003
RMOS3 V3.5
RMOS3 V3.50
Linux (available soon) 1); Other
Linux 1); Other
12 Mbit/s (compatible with CP5611),

optional
3 x RJ45 (compatible with CP1616),
optional
2 x 10/100/1000 Mbit/s
6 x, 2 of which at front
1 x / Yes
12 Mbit/s (compatible with CP5611),

optional
3 Port switch RJ45
(compatible with CP1616), optional
2 x 10/100/1000 Mbit/s
1 x / Yes
Linux 1); Other
Interfaces
PROFIBUS/MPI
PROFINET
Ethernet
USB 2.0 (high current)
VGA / audio

667 MHz FSB
667 MHz FSB
Intel Celeron M 440, 1.86 GHz,
533 MHz FSB
7 x PCI
1 x PCI-Express x16
3 x PCI-Express x4 (optional)
1 x VGA; 1 x DVI-D
(via adapter card, optional)
PCI-Express x 16 (2 x VGA or 2 x DVI)
Multi-Language
Multi-Language
Windows Server 2003
Order separately
Project-specific on request
1 x VGA;1 x DVI-D
(via adapter card, optional)
PCI-Express x 16 (2 x VGA or 2 x DVI) PCI-Express x 16 (2 x VGA or 2 x DVI)
Operating system
None
1 x 10/100/1000 Mbit/s
1 x / Yes
Drives
SATA hard disks
Internal installation
Installation at the front in the
swap frame
Installed internal in drive
holder (shock and vibrationdamped)
RAID1 configuration
Optical drives
DVD-ROM
DVDR/RW
Slots
Ambient conditions 2)
Vibration/shock load during
operation
Ambient temperature during
operation
Available
Not available
3/6
6 x (2 x internal, 4 x at front)
3x (internal: 2 x 3,5", 1 x at front

12.7 mm slimline) or 3x (2 x at front
3.5" low profile swap frame,
1 x 12.7 mm slimline)
6 x(2 x internal, 4 x at front)
0.2 g / 1 g
0.5 g / 5 g
0.5 g / 5 g
With maximum configuration:

5 ... 40 C

5 ... 50 C

5 ... 50 C
1) Suitable for specific LINUX versions in accordance with the specifications of the Siemens manufacturer's declaration
"Suitable for LINUX" (LINUX is a trademark of Linus Torvald); see http://www.siemens.de/simatic-pc/geeignet-fuer-linux
2) Restrictions in use of DVDR/RW and hard disks in swap frame.
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Overview
Benefits (continued)
High flexibility and user friendliness during commissioning,
operation and service
Preinstalled and activated operating system
restore DVD
server
RAID1 on-board (a PCI slot is not occupied)
Fast identification and replacement of the hard disk in the
event of a fault
Flexible applications in many different positions with telescopic rails or as tower industrial PC
High degree of flexibility and expandability thanks to integrated interfaces and 7 slots (PCI and PCI-Express)
The SIMATIC Rack PC 547B is a rugged industrial PC in 19" rack

format (4 HU).
It offers:
Maximum performance
Attractive price
Intel Core 2 Duo technology
Benefits
Maximum system performance for complex measuring,
control and visualization tasks
State-of-the-art PC technology (e.g. Intel Core 2 Duo and
Extended Memory 64 (EM64T) processor technology)
High-level performance (e.g. Intel 945G Express Chipset,
DDR2 667 memory supporting dual-channel technology)
High data transfer rates (e.g. with Serial ATA hard disks up to
250 GB, Gigabit Ethernet, PCI-Express technology)
Industrial compatibility and compactness for 24-hour use in
an industrial environment
Maximum processor performance (in maximum configuration)
to 40 C
Specific product design with a new front panel design and flat,
coated, dirt-repellent surfaces
Metal housing with a high degree of electromagnetic compatibility for use in industrial areas and in domestic, business and
commercial environments
Suitable for installing in space-saving control cabinets only
500 mm deep
Special hard disk mountings and card retainers for protection
against vibration and shock

availability
Assured 24-hour operation (high MTBF, speed-controlled fan)
Efficient self-diagnosis (front status LED for fan or temperature, SIMATIC PC DiagMonitor)
High degree of data security thanks to mirror drive system,
optionally in "hot swap" frames
High degree of investment security for long-term automation
concepts
Availability for at least 1.5 years, guaranteed availability of
component spare parts for 3 years
System-tested with SIMATIC components
Certification for global marketing (cULus)
Support for legacy interfaces (PS/2, COM, LPT)
Installation compatible for many device generations
Global service and support
Application
The SIMATIC Rack PC 547B offers system integrators, cabinet
designers, system engineers and machine designers a 19" rack
PC platform for high-performance IT applications on the control
and cell levels. It can be used for:
Process and visualization applications
Industrial image processing
Quality assurance/monitoring tasks
Measuring and control tasks
Data acquisition/management
The SIMATIC RACK PC 547B has CE certification for use in the
industrial sector as well as in residential and commercial areas,
and small businesses. In addition to the industrial applications,
it can also be used in building services automation or in facilities
open to the public.
3/7
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Design
Basic design
All-metal 19" casing (4 HU) for high electromagnetic compatibility and mechanical ruggedness; externally painted, prepared for mounting on telescopic rails
Horizontal and vertical installation is possible, can be used as
an industrial tower PC by using the appropriate kit.
Lockable front flap for authorized access to front swap media,
operator controls (Reset, Power), USB interface, front fan and
dust filter
Card retainer for PC modules for safe transport (vibration and
shock)
Replacement of PC components (e.g. PC cards or HDD) with
a single tool
Replacement of dust filter without tools
Dust protection by means of overpressure ventilation using
bearing-seated front fan via filter
6 slots for installing drives
- On the front: 1 x 3.5"; 3 x 5.25"
- Internal: 2 x 3.5"
Graphics on-board on the PCI-Express bus, Intel GMA950
integrated in chip set, up to 2048 x 1536 pixels, 75 Hz, 16 bit
colors
Interfaces:
- 1 x LAN 10/100/1000 Mbit/s Ethernet interface (RJ45)
- 4 x USB 2.0 at the rear, 2 x USB 2.0 at the front
- 2 x PS/2, 1 x COM1, 1 x LPT, 1 x VGA
- Audio: Line In/Out, Mic
7 spare slots for expansions (all long):
- 4 x PCI
- 1 x PCI-Express x16
Power supply: 110 - 230 V AC, 50/60 Hz
For design variations of the SIMATIC PC see "ordering data".
SIMATIC Rack PC 547B: Connections and Expansions

Housing with
anti-corrosion coating
SATA hard disk swap frame,

hot swap with RAID1 configuration
(removable during operation)
Status-, alarm indicator:

Operating mode
Hard disk access
Fan-, temperature status
Fan with
speed
monitor
Keyboard, mouse
2 x USB 2.0
COM1
Power switch
Opt. drive
2 x DVI-D or 2 x VGA
(optional):
via PCIe x16 graphics card
COM2:
Serial interface 2 (optional)
AC-Power
supply
Front door
lock
3.5 FDD
2 x USB 2.0
VGA
LPT1
Audio
Expansion slots:
4 x PCI, 2 x PCI Express x1,
1 x PCI Express x16
1 x Gigabit-Ethernet
2 x USB 2.0
A Tower Kit can be ordered as an accessory for converting the

computer into an Industrial Tower PC.
See "Ordering data for accessories"
3/8
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Ordering data
Order No.
Order No.
Configuration 1)
Z
SIMATIC Rack 547B
interfaces:
1 x Gbit LAN (RJ45);
1 x serial (COM1);
1 x parallel (LPT);
4 x USB,
2 x USB at the front;
2 x PS/2; audio;
7 slots (4 x PCI long,
1 x PCIe x16,
2 x PCIe x1);
slots:
6 (3 x 5.25", 1 x 3.5" externally
accessible; 2 x 3,5" internally
accessible)
Temperature and fan
monitoring; watchdog;
card retainer;
Processor:
Celeron 440
(2.0 GHz, 800 MHz FSB,
512 K L2 Cache)
Core 2 Duo E4300
2 MB L2 Cache, EM64-T)
Core 2 Duo E6600
(2.4 GHz, 1066 MHz FSB,
4 MB L2 Cache, EM64-T, VT)
Hard disks:
250 GB HDD SATA;
internal
2 x 250 GB HDD SATA;
internal
RAID1 (2 x 250 GB
HDD SATA, mirror disks);
internal
250 GB HDD SATA in swap
frame; front
2 x 250 GB HDD SATA in
swap frame; front
RAID1 (2 x 250 GB
HDD SATA, mirror disks) in
swap frame Hot-Swap; front
Memory:
512 MB DDR2 SDRAM
(1 x 512 MB), single channel
1.0 GB DDR2 SDRAM
(2 x 512 MB), dual channel
2.0 GB DDR2 SDRAM
(2 x 1.0 MB), dual channel
3.0 GB DDR2 SDRAM
(2 x 1.0 MB, 2 x 512 MB),
dual channel
4.0 GB DDR2 SDRAM
(4 x 1.0 MB), dual channel
Configuration (continued)
6AG4 104-0 7 7 7 7 - 7 7 7 7
DVD+/-RW; without FDD;
DVD-ROM and FDD;
DVD+/-RW and FDD;
Hardware expansion:
No expansion
Serial interface (COM2)
Serial interface (COM2) +

graphics card PCIe x16,
DH (2 x DVI or 2 x VGA)
Operating system
Windows 2000 Professional,
MUI (Eng, Fr, Ger, It, Sp),
SP4
Windows XP Professional,
SP2, SP3 enclosed
Windows Vista Ultimate MUI
(Eng, Fr, Ger, It, Sp),
SP1 enclosed
Windows Server 2003 Standard
Edition incl. 5 clients, MUI
(Eng, Fr, Ger, It, Sp), SP1, SP2
enclosed
No operating system
A
B
6AG4 104-0 7 7 7 7 - 7 7 7 7
Swap media:
DVD-ROM; without FDD;
Software expansion
SIMATIC PC DiagMonitor3)
enclosed
SIMATIC PC Image
Creator2)3)
software enclosed
SIMATIC PC DiagMonitor3) &
Image Creator software2)3)
enclosed;
Without software
G
H
J
0
1
2
Power supply,
country-specific cable version:
110/230 V industrial power
supply; European power
cable
supply; Chinese power cable
A
B
4
1) The SIMATIC PC Online Configurator offers a current overview:
www.siemens.com/ipc-configurator
2) Not together with Windows 2003 Server
3) Not together with Windows Vista Ultimate
3/9
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Ordering data
Order No.
Preferred versions (ex stock)

Interfaces:
1x 10/100/1000 Mbit/s
Ethernet (RJ45);
1x VGA;
2x COM;
1x LPT;
2x PS/2;
Audio 4x USB 2.0 on rear,
2x USB2.0 on front;
110/230V industrial power
supply unit
European power cable
Core 2 Duo E4300
2MB L2 Cache, EM64-T)
250 GB HDD internal
512 MB DDR2 667 SDRAM
DVD-ROM and diskette drive
Without operating system
Order No.
Accessories
6AG4104-0CA03-1XX0
Memory expansion
512 MB (1x 512 MB),
DDR2 667, DIMM
1 GB (2 x 512 MB)
DDR2 667 DIMM, kit for
dual-channel technology
2 GB (2 x 1 GB)
DDR2 667 DIMM, kit for
dual-channel technology
6ES7 648-2AF30-0HA0
6ES7 648-2AF40-0HB0
6ES7 648-2AF50-0HB0
Hard disk slide-in unit

for swap frame
SIMATIC PC accessories,
slide-in HDD swap frame
for 3.5" hard disk, serial ATA
(without hard disk)
6ES7 648-0EB00-1BA0
Tower Kit
for converting the computer into
an industrial tower PC
6ES7 648-1AA00-0XC0
Filter mats
Z
Interfaces:
1x 10/100/1000 Mbit/s
Ethernet (RJ45);
1x VGA;
2x COM;
1x LPT;
2x PS/2;
Audio 4x USB2.0 on rear,
2x USB2.0 on front;
supply unit
Core 2 Duo E4300
2MB L2 Cache, EM64-T)
250 GB HDD internal
1 GB DDR2 667 SDRAM
DVDRW and diskette drive
Windows XP Prof. multilanguage (Eng, Fr, Ger, It, Sp),
SP2
6AG4104-0CA14-1BX0
Z
Interfaces:
1x 10/100/1000 Mbit/s
Ethernet (RJ45);
1x VGA;
2x COM;
1x LPT;
2x PS/2;
Audio 4x USB2.0 on rear,
2x USB2.0 on front;
supply unit
Core 2 Duo E6600
(2.4 GHz, 1066 MHz FSB
4MB L2 Cache, EM64-T, VT)
250 GB HDD internal
1.0 GB DDR2 667 SDRAM
DVDRW and diskette drive
Windows XP Prof. multilanguage (Eng, Fr, Ger, It, Sp),
SP2
6AG4104-0DA14-1BX0
for Rack PC 547B

Packing unit 10 units
A5E00246975
Power cable, straight, 3 m long

Austria, Belgium, Finland,
France, Germany, Netherlands,
Spain, Sweden
United Kingdom
6ES7 900-0AA00-0XA0
6ES7 900-0BA00-0XA0
Switzerland
6ES7 900-0CA00-0XA0
USA
6ES7 900-0DA00-0XA0
Italy
6ES7 900-0EA00-0XA0
China
6ES7 900-0FA00-0XA0
36 month service option

for SIMATIC Rack PC and
Box PC 1)
A5E00510072
SIMATIC PC keyboard
German/international
USB connection
incl. 4-port USB hub
6ES7 648-0CB00-0YA0
A
USB mouse
(optical, 3-button)
A
for programming device and PC
with adapter
SIMATIC USB FlashDrive
6ES7648-0CD00-0YA0
6ES7 790-0AA01-0XA0
2 GB, USB 2.0, metal enclosure, A

bootable
6ES7 648-0DC40-0AA0
for communication products

see chapter 7
for power supplies and
AC UPS
see page 3/87
see chapter 9
1) Service option can be activated up to 90 days after delivery.

For a description of the service, refer to the appendix
3/10
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
101.6
176.5
Dimensions
430
448
Dimensions in mm
465.1
481.4
G_KT01_EN_00328
492
3/11
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Overview
availability
Efficient self-diagnostics (status display for Ethernet and
PROFIBUS; alarm display for fan, temperature, watchdog and
hard disks in RAID1 configuration, SIMATIC PC DiagMonitor)
Service-friendly design (modifications, servicing)
The SIMATIC Rack PC 647B is a very rugged, high-performance

industrial PC in 19" rack design (2HU) with excellent industrial
functionality.
It offers:
Maximum compactness
Maximum ruggedness
Benefits
Maximum compactness and industrial compatibility for
24-hour use in an industrial environment
Compact housing design (2HU)
500 mm deep
Maximale Prozessorleistung (im Vollausbau) ohne Leistungsverlust (Throttling) bis 50 C Umgebungstemperatur
Specific product design with a new front design and flat,
All-metal housing with high EMC for use in industrial
environment
High productivity thanks to faster data processing
High-level performance (e.g. Intel 945GM Express Chipset,
DDR2 memory supporting dual-channel technology)
High data transfer rates (e.g. with Serial ATA hard disks,
dual Gbit Ethernet)
Cost reductions through high investment security

Long-term platform with embedded Intel components
Availability for 3-5 years, guaranteed availability of component
spare parts for 5 years
Minimization of costs through time savings for
commissioning, operation and servicing
restore DVD
server
PROFIBUS or PROFINET interface and RAID1 controller
onboard (optional)
2 x LAN 10/100/1000 Mbit/s connections (Gbit LAN with
teaming capability)
event of a fault (e.g. front LEDs for HDD alarm in RAID1
configuration)
High degree of flexibility and expandability thanks to integrated interfaces and up to 3 slots (PCI and PCI-Express)
Application
The SIMATIC Rack PC 647B provides machine, systems and
control cabinet engineering companies with a high-performance
and highly flexible 19" rack PC platform for machine-oriented
industrial applications:
Measuring, open-loop control and closed-loop control of
process and machine data
Visualization of manufacturing sequences
Computing and processing of images within the scope of
quality inspections
Data acquisition and management
The SIMATIC Rack PC 647B has CE certification for use in the
and small businesses. In addition to the industrial applications,
it can also be used in building services automation or in facilities
open to the public.
3/12
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Design
Basic design
All-metal 19" casing (2HU) for high degree of mechanical ruggedness (vibration/shock) and high electromagnetic
compatibility
Horizontal installation is possible and it is prepared for
mounting telescopic rails
Lockable front door for authorized access (access protection)
to front swap media, command elements (reset, power), USB
interface, front fan and dust filter
Card retainer for reliable operation of PC modules in the event
of vibrations and shocks
Opening of the enclosure cover with only one screw and
replacement of PC components (e.g. PC cards or HDD) with a
single tool
Replacement of front fan and dust filter without the need for
tools
bearing seated front fan through filter
- on the front: 2x HDD swap frame (low profile);
1x optical drive (Slimline)
- internal: 2 x 3.5" (in the optional vibration-damping drive
bracket) as an alternative for swap frames
integrated in chip set, up to 2048 x 1536 pixels, 75 Hz,
16 bit colors
Interfaces:
- 2 x LAN 10/100/1000 Mbit/s Ethernet interface
(RJ45, with team working capability)
- 4 x USB 2.0 at the rear, 2 x USB 2.0 at the front
(one of which can be used when door is closed)
- 2 x PS/2, COM1, COM2, LPT1, VGA
- Audio: Line Out, Mic
- 2 x PCI long
- 1 x PCI-Express x16 (PEG)
Power supply: 110/230 V AC, 50/60 Hz, cable of
country-specific design
Design variations
Processor:
- Intel Core 2 Duo T7400, 2.16 GHz, 667 MHz FSB, 4 MB L2
Cache with Extended Memory 64 (EM64) and virtualization
technology (VT)
- Intel Core 2 Duo T5500, 1.66 GHz, 667 MHz FSB, 2 MB L2
Cache with Extended Memory 64 (EM64) technology)
- Intel Celeron M 440, 1.86 GHz, 533 MHz FSB, 1 MB L2
Cache
Main memory expansion from 512 MB to 4 GB DDR2 667
SDRAM (configured as dual channel for top performance from
2 GB upwards)
Fieldbus onboard:
- PROFIBUS/MPI, CP5611-compatible or PROFINET,
3 x RJ45, CP16116-compatible
Graphics expansion:
- PCI-Express graphics card x16, (Dual Head: 2 x VGA or
2 x DVI-I), 128 MB, up to 2048 x 1536 pixels, 75 Hz, 32 bit
colors
- ADD card through PCI-Express x16 slot (1 x DVI-D),
for connection of a digital monitor
Drives:
- Serial ATA 3.5" hard disks with NCQ technology: Installed
internally on the fixed hard disk support (1 x 80 GB)
- Installed internally in a vibration/shock-absorbing hard disk
support or in a swap frame at the front (hot swapping in RAID
1 configuration):
- 1 x 80 GB
- 1 x or 2 x 160 GB
- RAID1, 2 x 160 GB (RAID controller onboard)
- Optical drive DVD/-R/RW Slimline
- CompactFlash drive, internal
Country-specific power cable
Preinstalled operating systems:
- Windows XP Professional Multi-Language
- Windows Vista Ultimate Multi-Language
- Windows Server 2003 Standard Edition incl. 5 Client MultiLanguage
SIMATIC PC DiagMonitor1)
SIMATIC PC/PG Image Creator1)
1) Further information can be found under "Expansion components".

hot swap with RAID1 configuration
Lock for front door and

Power hot swap frames
supply
DVD R/RW,
slimline
Housing with
Status-, alarm indicator for
effective self-diagnostics
2 x USB 2.0 (1 x usable
with door closed)
Fan with
speed monitor
AC-Power
supply
Expansion slots:
2 x PCI, 1 x PCI Express x16
1 x PROFINET
(3 Ports, optional)
1 x DVI-D via adapter (opt.)

2 x VGA or 2 x DVI-D via
PCIe x16 graphics card
(opt.)
Audio
COM1 COM2
LPT1
4 x USB 2.0
VGA
Keyboard,
mouse
3/13
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Ordering data
Order No.
Order No.
Configuration 1)

Interfaces: 2 x 10/100/
1000 Mbit/s Ethernet (RJ45); 1 x
graphic (VGA); 2 x COM; 1 x
LPT; 2 x PS/2; 4x USB 2.0 on
rear, 2 x USB 2.0 on front; audio;
drive slots: 3 (2 x low profile
swap frames, 1 x Slimline ODD
externally accessible; 2 x 3.5
internally accessible alternatively
to swap frames) Temperature
and fan monitoring; watchdog;
card retainer
6AG4112- 0 7 7 7 7 - 7 7 7 7
Processor, motherboard:
Celeron M 440
(1.86 GHz, 1MB L2 Cache),
motherboard without fieldbus
Celeron M 440 (1.86 GHz, 1MB
L2 Cache), motherboard with
PROFIBUS/MPI
Celeron M 440 (1.86 GHz, 1 MB
L2 Cache), motherboard with
PROFINET (3x RJ45, CP1616
compatible) 2)
Core 2 Duo T5500 (1.66 GHz,
2MB L2 Cache, EM64-T),
2MB L2 Cache, EM64-T),
motherboard with PROFIBUS/MPI
2 MB L2 Cache, EM64-T),
motherboard with PROFINET
(3x RJ45, CP1616 compatible)2)
4MB L2 Cache, EM64-T, VT),
4MB L2 Cache, EM64-T, VT),
motherboard with
PROFIBUS/MPI
Core 2 Duo T7400 (2.16 GHz, 4 MB
L2 Cache, EM64-T, VT), motherboard with PROFINET (3x RJ45,
CP1616 compatible) 2)
Hard disks:
80 GB HDD SATA;
0.5 g vibration, 5 g shock, internal
160 GB HDD SATA;
2 x 160 GB HDD SATA;
RAID1 (2 x 160 GB HDD
SATA, mirror disks);
80GB HDD SATA in swap
frame; front
160 GByte HDD SATA in swap
frame; front
2 x 160 GB HDD SATA in swap
frame; front
RAID1 (2 x 160 GB HDD
SATA) in swap frame,
Hot-Swap; front
512 MB DDR2 SDRAM

1 GB DDR2 SDRAM
2 GB DDR2 SDRAM
(2 x 1 GB), dual channel
4 GB DDR2 SDRAM
Swap media:
Compact Flash drive, internal
DVDRW
without swap media
Bus module/hardware expansion

Bus modules 3 slots: 2 x PCI, 1 x
PCIe x16; without HW expansions
Bus modules 3 slots:
2 x PCI, 1 x PCIe x16 assigned;
+ DVI extension adapter (DVI-D)
Bus modules 3 slots: 2 x PCI, 1 x
PCIe x16 assigned; + graphics
card PCIe x16, DH (2 x DVI or 2 x
VGA)
Operating system:
Windows XP Professional,
MUI (Eng, Fr, Ger, It, S),
SP2, SP3 enclosed
Windows Vista Ultimate,
SP1 enclosed
Edition incl. 5 clients, MUI (Eng,
Fr, Ger, It, Sp), SP1, SP2 enclosed
without operating system
A
B
C
D
H
K
M
P

2) Not together with Windows 2003 Server
3) Not together with Windows Vista Ultimate
3/14

Software expansion:
SIMATIC PC DiagMonitor 3.2 3)
Software enclosed
SIMATIC PC Image Creator 2.1
Software enclosed
SIMATIC PC DiagMonitor 3.2 3)
& Image Creator 2.1
Software enclosed
without software
Power supply,
country-specific cable:
supply with Namur;
supply with Namur;
UK power cable
supply with Namur;
power cable for Switzerland
supply with Namur;
USA power cable
supply with Namur;
power cable for Italy
supply with Namur; power
cable for China
6AG4112- 0 7 7 7 7 - 7 7 7 7
1
2
3
4
0
1
8
0
1
X
A
B
C
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Ordering data
Order No.
Order No.
Accessories
Memory expansion
512 MB DDR2 677 SDRAM,
SO DIMM
1 GB DDR2 667 SDRAM,
SO DIMM
SO DIMM
6ES7 648-2AG30-0HA0
SIMATIC PC keyboard
USB connection
6ES7 648-2AG40-0HA0
6ES7 648-2AG50-0HA0
USB mouse
(optical, 3-button)
A
for programming device and PC
with adapter

Spain, Sweden
United Kingdom
6ES7 900-0AA00-0XA0
6ES7 900-0CA00-0XA0
USA
6ES7 900-0DA00-0XA0
Italy
6ES7 900-0EA00-0XA0
China
6ES7 900-0FA00-0XA0
2 GB, USB 2.0,

metal enclosure, bootable
6ES7648-0CD00-0YA0
6ES7 790-0AA01-0XA0
6ES7 648-0DC40-0AA0
For communication products

see chapter 7
For power supplies and
DC UPS
see page 3/83
RMOS3 real-time operating
system
see page 3/66

for SIMATIC Rack PC
and Box PC 1)
6ES7 900-0BA00-0XA0
Switzerland
6ES7 648-0CB00-0YA0
A5E00510072
SIMATIC PC
CompactFlash with diagnostics
256 MB
6ES7 648-2BF02-0XC0
2 GB
6ES7 648-2BF02-0XF0
4 GB
6ES7648-2BF02-0XG0
8 GB
6ES7648-2BF02-0XH0

For a description of the service, refer to the appendix. Chapter 10
Dimensions
Ultimate load per pair, min.
30 kg
465
Full extraction length, min.
470 mm
Rail thickness, max.
9.7 mm
76.2
87.6
Mounting screws
M5 x 6 mm
The mounting screws of the telescopic rails may not protrude by

more than 5 mm into the enclosure
G_KT01_XX_00358
The enclosure is prepared for the following telescopic rails:

Rittal: Type 3659.180 for 600 mm cabinet / Type RP 3659.190 for
800 mm cabinet
444.6
429.9
487.1
8.2
5,7
Technical data of the telescopic rails

481.4
3/15
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Overview
availability
Efficient self-diagnostics (status display for Ethernet and
PROFIBUS; alarm display for fan, temperature, watchdog and
hard disks in RAID1 configuration, SIMATIC PC DiagMonitor)
Service-friendly design (modifications, servicing)
The SIMATIC Rack PC 847B is a very rugged, high-performance

industrial PC in 19" rack design (4 HU) with excellent industrial
functionality.
It offers:
Maximum expandability
Maximum ruggedness
Benefits
Maximum industrial compatibility and compactness for 24hour use in an industrial environment
Maximum processor performance (in maximum configuration)
to 50 C
Specific product design with a new front design and flat,
All-metal housing with high EMC for use in industrial environment
500 mm deep
High productivity thanks to faster data processing
High-level performance (e.g. Intel 945GM Express Chipset,
DDR2 memory supporting dual-channel technology)
High data transfer rates (e.g. with Serial ATA hard disks,
dual Gbit Ethernet)

Availability for at least 2.5 years, guaranteed availability of
component spare parts for 5 years
Minimization of costs through time savings for
commissioning, operation and servicing
restore DVD
server
PROFIBUS or PROFINET interface and RAID1 controller
onboard (optional)
2 x LAN 10/100/1000 Mbit/s connections
(Gbit LAN with teaming capability)
event of a fault (e.g. front LEDs for HDD alarm in RAID1
configuration)
Flexible applications in many different positions with
telescopic rails or as tower industrial PC
High degree of flexibility and expandability thanks to integrated interfaces and up to 11 slots (PCI and PCI-Express)
Application
The SIMATIC Rack PC 847B provides machine, systems and
control cabinet engineering companies with a high-performance
and highly flexible 19" rack PC platform for machine-oriented industrial applications:
process and machine data
Visualization of manufacturing sequences
Computing and processing of images within the scope of
quality inspections
Data acquisition and management
The SIMATIC Rack PC 847B is certified to CE for industrial
applications.
3/16
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Design
Basic design
All-metal 19" installation housing (4 HU) for high degree of mechanical ruggedness (vibration/shock) and high electromagnetic compatibility; prepared for mounting of telescopic rails
Horizontal and vertical installation is possible, can be used as
an industrial tower PC by using the appropriate kit.
Lockable front door for authorized access (access protection)
to front swap media, command elements (reset, power), USB
interface, front fan and dust filter
Opening of the enclosure cover with only one screw and replacement of PC components (e.g. PC cards or HDD) with a
single tool
Replacement of front fan and dust filter without the need for
tools
bearing seated front fan through filter
- On the front: 1 x 3.5"; 3 x 5.25"
- Internal: 2 x 3.5" (in the optional vibration-damping drive
bracket or in the fixed hard disk support)
integrated in chip set, up to 2048 x 1536 pixels, 75 Hz, 16 bit
colors
Interfaces:
- 2 x LAN 10/100/1000 Mbit/s Ethernet interface (RJ45, with
team working capability)
- 4 x USB 2.0 at the rear, 2 x USB 2.0 at the front (one of which
can be used when door is closed)
- 2 x PS/2, COM1, COM2, LPT1, VGA
- Audio: Line Out, Mic
- 7 x PCI long
- 1 x PCI-Express x16 (PEG)
Power supply: 110/230 V AC, 50/60 Hz, cable of countryspecific design

hot swap with RAID1 configuration Power
supply
Lock for front door and

hot swap frames
Housing with
3.5 FDD
Status-, alarm indicator for

effective self-diagnostics
Opt. drive
2 x USB 2.0 (1 x usable

with door closed)
Fan with
speed monitor
AC-Power
supply
Expansion slots:
7 x PCI,
1 x PCI Express x16,
3 x PCI Express x4 (opt.)
1 x PROFINET
(3 ports, optional)
1 x DVI-D via adapter

(opt.)
2 x VGA or 2 x DVI-D
via PCIe x16 graphics card
(opt.)
COM1 COM2
LPT1
4 x USB 2.0
Audio
VGA
Keyboard,
mouse
A Tower Kit can be ordered as an accessory for converting the

computer into an Industrial Tower PC.
See "Ordering data for accessories".
3/17
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Ordering data
Order No.
Order No.
Configuration 1)
Z
Interfaces: 2 x 10/100/1000
Mbit/s Ethernet (RJ45); 1 x graphic (VGA); 2 x COM; 1 x LPT;
2 x PS/2; 4 x USB 2.0 on rear,
2 x USB 2.0 on front; audio;
temperature and fan monitoring,
watchdog; slots: 6 (3 x 5.25", 1 x
3.5" externally accessible; 2 x
3.5" internally accessible)
6ES7 643-8 7 7 7 7 - 7 7 7 7
Processor, motherboard:
L2 cache), motherboard
without fieldbus
L2 cache), motherboard with
PROFIBUS/MPI
L2 cache), motherboard with
PROFINET (3 x RJ45, CP 1616compatible) 1) 2)
2 MB L2 cache, EM64-T),
motherboard with PROFIBUS/MPI
motherboard with PROFINET (3 x
RJ45, CP 1616-compatible) 1) 2)
4 MB L2 cache, EM64-T), motherboard with PROFIBUS/MPI
motherboard with PROFINET
(3 x RJ45, CP 1616-compatible)1) 2)
Hard disks:
80 GB HDD SATA; 0.5 g
vibration, 5 g shock, internal
2 x 160 GB HDD SATA; 0.5 g
RAID1 (2 x 160 GB HDD SATA,
mirror disks); 0.5 g vibration,
5 g shock, internal
80 GB HDD SATA
in swap frame; front
160 GB HDD SATA
2 x 160 GB HDD SATA
RAID1 (2 x 160 GB HDD SATA)
in swap frame, hot-swap; front
256 MB DDR2 SDRAM
512 MB DDR2 SDRAM
1 GB DDR2 SDRAM
(1 x 1 GB), single channel
Z)
1)
2)
3)
2 GB DDR2 SDRAM
4 GB DDR2 SDRAM
Swap media:
FDD
DVD-ROM, without FDD
DVD+/-RW, without FDD
DVD-ROM and FDD
DVD+/-RW and FDD
Bus module / hardware expansion

Bus module, 8 slots: 7 x PCI, 1 x
PCIe x16; without HW expansions
Bus module, 8 slots: 7 x PCI,
1 x PCIe x16 assigned; + DVI
extension adapter (DVI)
Bus module, 8 slots: 7 x PCI, 1 x
PCIe x16 assigned; + graphics
card PCIe x16, DH (2 x DVI or 2 x
VGA)
1 x PCIe x16, 3 x PCIe x4;
without HW expansions
1 x PCIe x16 assigned, 3 x PCIe
x4; + DVI extension adapter (DVI)
1 x PCIe x16 assigned, 3 x PCIe
x4; + graphics card PCIe x16,
DH (2 x DVI or 2 x VGA)
Operating system:
Windows 2000 Professional,
MUI (Eng, Fr, Ger, It, Sp), SP4
Windows XP Professional, MUI (Eng,
Fr, Ger, It, Sp), SP2, SP3 enclosed
Windows Vista Ultimate, MUI
(Eng, Fr, Ger, It, Sp), SP1
enclosed (min. 512 MB memory)
Edition incl. 5 Client, MUI (Eng, Fr,
Ger, It, Sp), SP1, SP2 enclosed
A
B
C
Software expansion:
SIMATIC PC DiagMonitor enclosed)
Software enclosed 1)3)
SIMATIC PC DiagMonitor 3)& Image
Creator1)3) Software enclosed
Without software
G
H
K
M
P
0
1
2
Subject to export regulations: AL: N and ECCN: 5D992

Not together with Windows 2003 Server
Not together with Windows 2000
Not together with Windows Vista Ultimate
3/18

Power supply,
country-specific cable:
supply with Namur;
110/230 V industrial power supply with Namur; UK power cable
supply with Namur;
power cable for Switzerland
supply with Namur;
USA power cable
supply with Namur;
power cable for Italy
supply with Namur;
power cable for China
6ES7 643-8 7 7 7 7 - 7 7 7 7
3
4
0
1
2
3
4
0
1
A
B
C
X
A
B
C
X
1
2
Siemens AG 2009
Industrial PC
SIMATIC Rack PC
Ordering data
Order No.
Memory expansion
SO DIMM
SO DIMM
SO DIMM
SO DIMM
Tower Kit
A
6ES7 648-2AG20-0HA0
for converting the computer into

an industrial tower PC
6ES7 648-2AG30-0HA0
6ES7 648-2AG40-0HA0
for SIMATIC Rack PC

and Box PC 1)
6ES7 648-2AG50-0HA0
6ES7 648-0EB00-1BA0
Filter mats
For Rack PC 847B
Packing unit 10 units
Spain, Sweden
United Kingdom
6ES7 648-1AA00-0XD0
A5E00510072
SIMATIC PC keyboard
USB connection
Hard disk slide-in unit

for swap frame
SIMATIC PC accessories,
slide-in HDD swap frame
for 3.5" hard disk, serial ATA
(without hard disk)
Order No.
Accessories (continued)
Accessories
A5E01064980
6ES7 900-0AA00-0XA0
6ES7 648-0CB00-0YA0
6ES7648-0CD00-0YA0
USB mouse
(optical, 3-button)
for programming device
and PC with adapter
6ES7 790-0AA01-0XA0
2 GB, USB 2.0,

6ES7 648-0DC40-0AA0
for Communication products

see chapter 7
6ES7 900-0BA00-0XA0
Switzerland
6ES7 900-0CA00-0XA0
USA
6ES7 900-0DA00-0XA0
Italy
6ES7 900-0EA00-0XA0
China
6ES7 900-0FA00-0XA0
for power supplies and DC UPS

see page 3/83
for RMOS real-time operating
system
see page 3/66
for expansion components
see chapter 9
101.6
176.5
Dimensions
430
448
Dimensions in mm
465.1
481.4
G_KT01_EN_00328
492
3/19
Siemens AG 2009
Industrial PC
SIMATIC Box PC
Introduction
Overview
SIMATIC Box PCs provide mechanical engineers, plant engineers and control cabinet makers with particularly rugged industrial PC systems for use in powerful yet compact applications.
Three device classes are available for various requirements:
SIMATIC Microbox PC 427B ultra-compact and
maintenance-free: the flexible embedded industrial PC
SIMATIC Box PC 627B maximum performance in the most
restricted space / with Intel Core 2 Duo technology
SIMATIC Box PC 827B maximum performance with high
flexibility / with Intel Core 2 Duo technology
Shared industrial functionality
Extremely compact
Certification for global marketing
High vibration/shock load during operation
Wide operational temperature range
Designed for 24-hour continuous operation
Integrated PROFIBUS and PROFIBUS/MPI interface (optional)
Integrated parameterizable monitoring functions
(temperature, fan, watchdog)
High service friendliness
Operating system preinstalled and activated for fast startup
Availability for 3 to 5 years
Repairs and spare parts service for 5 years
Installation and software compatible with predecessor model
Long-term availability of PC components from the Intel
embedded line
3/20
SIMATIC Microbox PC 427B ultra-compact and maintenance-free: the flexible embedded industrial PC
Operation without fan thanks to CompactFlash
High performance with highly compact design
Optimized for embedded applications
Expandable with as many as 3 PC/104-Plus or PCI-104 I/O
cards
SIMATIC Box PC 627B maximum performance in the most
restricted space with Intel Core 2 Duo technology
control and visualization tasks through use of Intel Core 2 Duo
processors
Highly compact design for space-saving and flexible installation as result of:
- Compact housing design (volume 6 liters)
- Flexible installation with mounting brackets or portrait
assembly kit
RAID1 controller onboard
Rugged design for direct installation in the machine
Maximum processor performance up to ambient temperature
of 55 C
High shock/vibration resistance in all possible mounting
positions
CompactFlash Drives
Battery-backed SRAM as memory for WinAC data
(with 24 V DC industrial power supply)
2 x 7-segment display and 2 signal LEDs
(freely programmable)
SIMATIC Box PC 827B maximum performance with high
flexibility / with Intel Core 2 Duo technology
control and visualization tasks through use of Intel Core 2 Duo
processors
Highly flexibility as result of:
- 5 expansion slots and integral interfaces
- Various installation possibilities with mounting brackets or
portrait assembly kit
RAID1 controller onboard
of 55 C
positions
All interfaces on one side to allow optimum installation in
control cabinet
CompactFlash drives, accessible from the outside
2 x 7-segment display and 2 signal LEDs
Siemens AG 2009
Industrial PC
SIMATIC Box PC
Introduction
SIMATIC Box PC 627B
SIMATIC Box PC 827B
Design
Intel Pentium M 1.4 GHz,

400 MHz FSB
Intel Celeron M 1 GHz,
400 MHz FSB, SLC
Intel Celeron M 900 MHz,
400 MHz FSB
Intel Core 2 Duo T7400 2.16 GHz

667 MHz FSB, 4 MB SLC
Intel Core 2 Duo T5500 1.66 GHz,
Intel Celeron M 440 1.86 GHz,
Intel Core 2 Duo T7400 2.16 GHz

Intel Core 2 Duo T5500,1.66 GHz,
Intel Celeron M 440 1.86 GHz,
Rail or wall mounting
Wall or portrait mounting

General features
Processor
Main memory
Static RAM
2 MB
Free slots for expansions
Up to 3 x PCI-104 Plus or
PCI-104 (expansion rack)
2 x PCI or
1 x PCI-Express x4. 1 x PCI
(175 mm / 265 mm)
4 x PCI (265 mm),

1 PCI-Express x4 (175 mm) or
2 x PCI-Express x4,
1 x PCI-Express x4 (175 mm),
2 x PCI (265 mm)
Graphics
onboard
onboard
onboard
Operating system
Preinstalled
supplied on Restore CD
Windows XP Embedded,
in conjunction with CF card
> 512 MB or hard disk
Windows XP Professional MultiLanguage; in conjunction with
hard disk
Multi-Language

Multi-Language
Multi-Language
Windows XP Embedded English
on 2 GB CompactFlash
Multi-Language

Multi-Language
Multi-Language
Windows XP Embedded English
on 2 GB CompactFlash
Multi-Language
Order separately
RMOS3 V3.50
RMOS3 V3.50
RMOS3 V3.50
Project-specific on request
Linux1)
other
Linux1)
other
Linux1)
other
PROFINET onboard
3 Port switch RJ45

(CP1616 compatible), optional
3 Port switch RJ45

3 Port switch RJ45

PROFIBUS / MPI
12 Mbit/s (CP 5611-compatible),

optional

optional

optional
Ethernet
2 x 10/100/1000 Mbits
2 x 10/100/1000 Mbits
2 x 10/100/1000 Mbits
USB 2.0 (high current)
4x
4x
4x
VGA, LVDS, DVI
1 x DVI-I (DVI and VGA)
1 x DVI-I
1 x DVI-I
1 x 2.5" (optional)
1 x 3.5", 2 x 2.5", 2 x 2.5"/RAID1
1 x 3.5", 2 x 2.5, 2 x 2.5/RAID1
none
Interfaces
Drives
Hard disks (SATA)
Flash Drive
Optional, accessible from outside:

256 MB and 512 MB
2 GB, internal and 1 GB, internal
not accessible: 1 GB and 2 GB
No. 1, at front,
accessible from outside
No. 2, internal, instead of HDD,
ODD
accessible from outside:

Nr. 1
Nr. 2, instead of HDD, ODD
optional
optional
Optical drives
DVD+/-RW
Environmental conditions
Vibration/shock load during

operation
1 g / 15 g
(with Flash Drive)
1g/5g
1g/5g
Ambient temperature during

operation

0 ... 55 C (with Flash Drive)
5 ... 40 C (with Festplatte)

5 ... 50/55 C (with 20/10 W load on
PCI/PCI-Express bus)
5 ... 45 C

5 ... 50/55 C (with 20/10 W load on
PCI/PCI-Express bus)
5 ... 45 C
Available
Not available
1) Suitable for specific LINUX versions in accordance with the specifications of the Siemens manufacturer's
declaration "Suitable for LINUX" (LINUX is a trademark of Linus Torvald); see
http://www.siemens.de/simatic-pc/geeignet-fuer-linux
3/21
Siemens AG 2009
Industrial PC
SIMATIC Box PC
Overview
Application
The SIMATIC Microbox PC 427B provides mechanical engineers, plant engineers, and switch cabinet manufacturers with a
high performance, compact PC platform for application at the
machine or in the process, and applications in the industrial environment for:
process and machine data (e.g. test beds)
Operating and visualization tasks with separate display/monitor solutions (e.g. information terminals, large-scale displays)
Communication tasks as gateway or server
The application spectrum of the Microbox PC 427B ranges from

automation computers fully integrated in TIA with WinAC for example, through C/C++-based automation solutions with the wellproven SICOMP RMOS3 operating system with real-time and
multi-tasking capability, to "standalone" applications in general
IT use.
The SIMATIC Microbox PC 427B is a rugged embedded industrial PC for use at the machine:
Ultra-compact
(262 mm wide, 134 mm high, depth from 47 mm)
Maintenance-free since e.g. no rotating parts
Optimized, flexible embedded industrial PC
Benefits
High performance with highly compact design
Pentium M technology up to 1.4 GHz, DDR2 memory technology up to 2 GB
Performance-enhanced graphic
Optimized for embedded applications
2 MB buffered SRAM, of which 128 KB can be written within
the buffer time
Optimization of headless operation
Availability of 3 to 5 years, guaranteed availability of spare
parts for 5 years
System-tested SIMATIC software packages
availability
Completely maintenance-free 24-hour/365-day operation
since no fan is installed
Efficient self-diagnostics (SIMATIC PC DiagMonitor, SOM,
status LED)
Data backup solutions (preventative data backup)
Reduced costs through high industrial functionality
Excellent industrial compatibility, even when subjected to
extreme vibration and shock
High degree of industrial compatibility at high temperatures
because the enclosure is optimized for air cooling
Service-friendly hardware configuration (Reset button is
externally accessible, components can be replaced on site)
Expandable with as many as 3 PC/104-Plus or PCI-104 I/O
cards
Efficient self-diagnostics (SIMATIC PC DiagMonitor, BIOS
manager, status LED)
Integral component of Totally Integrated Automation (TIA)
thanks to integral PROFINET and PROFIBUS/MPI interfaces
3/22
For software products that require Windows XP Professional, the

combination of Windows XP Professional multi-language is
available preinstalled on hard disk.
The Microbox PC 427B has CE certification for use in the industrial sector as well as in residential and commercial areas, and
small businesses. In addition to industrial applications, it can
also be used in building services automation or in facilities open
to the public. The device also has the most important marine approvals, provided that configurations with CompactFlash memories are used.
Due to the fan-free design and use of SIMATIC PC CompactFlash memories, there are no rotating parts and the system availability is increased. It is possible to install the CompactFlash
memory either accessible externally so that it can be swapped,
or internally so that it cannot be easily accessed externally.
Siemens AG 2009
Industrial PC
SIMATIC Box PC
Design
Basic design
All-metal casing, resistant to vibrations and shocks, also with
high electromagnetic compatibility
Graphics onboard, on AGP bus: DVI-I: VGA (analog) and DVI
(digital)
- CRT resolution:
Up to 1600 x 1200 pixels / true color / 60 to 120 Hz
- DVI resolution:
Up to 1600 x 1200 pixels / true color
Optical drives can be connected externally via USB interface,
not included in scope of supply
Interfaces (accessible from one side):
- 4 x USB V2.0
- 1 x COM1 (RS232)
Free slots (when using the expansion rack):
- Up to 3 x PC/104-Plus or PCI-104 I/O cards
Power supply: 24 V DC (20.4 ... 28.8 V)
SIMATIC Microbox PC 427B: Connections and Expansions

Ventilation 3 x
slits
PCI-104
slots
DVI-I connection 1 x GigabitEthernet

(DVI/VGA
combined)
1 x PROFINET
(3 Ports,
optional)
3
DC-Power
supply
4 x USB 2.0
COM1 Battery
exchange
from outside
Drive options: 80 GB, Flash-Drive, others via USB
All-metal
housing
Watchdog
Power indicator
PROFINET
status display
2 programmable
status LEDs
Interface
labeling
The SIMATIC Microbox PC 427B can be expanded with modularity and flexibility with central I/O. For this purpose up to 4 expansion frames are mounted.
For more information see "Expansion components".
3/23
Siemens AG 2009
Industrial PC
SIMATIC Box PC
Ordering data
Order No.
Order No.
Configuration 1)
400 MHz FSB, SLC 0 KB;
256 MB DDR2 RAM
(1 x 256 MB); without HD;
without flash drive; without
operating system; 24 V DC
industrial power supply
Configuration 1)
Z
6ES7 647-7A 7 7 0 - 7 7 7 0
Processor:
400 MHz FSB
400 MHz FSB, PROFIBUS DP 12
Celeron M 900 MHz,
400 MHz FSB, CAN
400 MHz FSB, SLC 512 KB
400 MHz FSB, SLC 512 KB,
PROFIBUS DP 12
Intel Celeron M 1 GHz, 400 MHz
FSB, SLC 512 KB, PROFINET
400 MHz FSB, SLC 2 MB
400 MHz FSB, SLC 2 MB,
PROFIBUS DP 12
Intel Pentium M 1.4 GHz, 400
MHz FSB, SLC 2 MB, PROFINET
256 MB DDR2 533, SODIMM
512 MB DDR2 533, SODIMM
1 GB DDR2 533, SODIMM
2 GB DDR2 667, SODIMM
Expansion (HW):
No expansion (HW)
Second RS232 interface in
expansion rack 4)
Drives:
without HD, without CompactFlash
80 GB HDD SATA
256 MB CompactFlash
swappable (accessible)
2 GB CompactFlash
4 GB CommpactFlash
256 MB CompactFlash DIAG
2 GB CompactFlash DIAG
2 GB CompactFlash internal
(not accessible)
4 GB CompactFlash
swappable (not accessible)
internal (not accessible)
internal (not accessible)
intern (not accessible)
Z 6ES7 647-7A 7 7 0 - 7 7 7 0
Operating system: 3)
Windows XP Embedded preinstalled
Windows XP Professional MUI
Windows Vista Ultimate MUI
(Eng, Ger, Fr, It, Sp)
X
A
B
C
A
Accessories
B
D
E
F
256 MB, DDR2, SODIMM

512 MB, DDR2, SODIMM
1 GB, DDR2, SODIMM
2 GB, DDR2, SODIMM
6ES7648-2AG20-0GA0
A
A
6ES7648-2AG30-0GA0
6ES7648-2AG40-0GA0
6ES7648-2AG50-0HA0
6AG4 070-0BA00-0XA0

in the SIMATIC Microbox PC 427B
Packing unit contains 6 expansion
racks
Starter package
Microbox PC 427B
6ES7 647-7AF25-0AA0
1.0 GHz Celeron M incl. 24 V power

supply, SIMATIC PC USB Flash
drive, Windows XP Embedded,
expansion rack
1
2
3
4
SIMATIC PC adapter cable, DVI-I

compliant with VGA, 250 mm
6ES7 648-3AB00-0XA0
Portrait installation kit

Interfaces to the front
6ES7648-1AA20-0YB0

for SIMATIC Rack PC and Box PC
A5E00510072
2)
SIMATIC PC keyboard
USB port
0
1
X
A
M
Q
R
S
T
U
V
G
A
USB mouse
(optical, 3-button) for programming device and PC with adapter
B
SIMATIC PC
CompactFlash with diagnostics
A
256 MB
A
2 GB
A
4 GB
A
8 GB
SIMATIC PC USB-FlashDrive
2 GB, USB 2.0,
6ES7 648-0CB00-0YA0
6ES7648-0CD00-0YA0
6ES7 790-0AA01-0XA0
6ES7 648-2BF02-0XC0
6ES7 648-2BF02-0XF0
6ES7648-2BF02-0XG0
6ES7648-2BF02-0XH0
6ES7 648-0DC40-0AA0

see page 7/1
for power supplies and DC-UPS
see page 3/83
for RMOS3 real-time operating

system
see page 3/66
for PC I/O modules

see page 3/75

3) XP Embedded on 2GB CompactFlash or hard disk.
XP Professional or Vista only with hard disk.
4) only for versions without fieldbus, with CAN or with PROFIBUS

3/24
Siemens AG 2009
Industrial PC
SIMATIC Box PC
Dimensions
262
G_KT01_EN_00327
138
133
46.5
97.5
52.5
80.5
35.5
63.5
18.5
119.7
G_KT01_EN_00306
3/25
Siemens AG 2009
Industrial PC
SIMATIC Box PC
SIMATIC Box PC 627B
Overview
Benefits
Intel processors: Core 2 Duo or Celeron M
Intel chipset: 945GM Express + ICH7R
Intel graphic media accelerator GMA 950
PCI-Express technology
DDR2 667 memory technology up to 4 MB
SATA hard disks up to 160 MB
The SIMATIC Box PC 627B is optimized for high-performance

PC applications and for installation direct at the machine:
It offers:
Maximum performance in
the smallest space
Highly compact design for space-saving and flexible installation

Compact housing design (volume 6 liters)
Flexible installation in many different positions with mounting
brackets or portrait installation kit
On-board: PROFINET or PROFIBUS interface and RAID1
controller (optional)
2 x PCI or optionally 1 x PCI-Express x4 and 1 x PCI
2 LAN 10/100/1000 Mbit/s connections
(Gbit LAN with teaming capability)
4 USB ports 2.0 (high current)
of 55 C
positions
High EMC for safe operation
2 Flash drives (optional)
High system availability, fast startup, maintenance and
servicing
High degree of data security thanks to mirror disk system
(optional)
(with 24 V DC industrial power supplies)
2 x 7-segment display, 2 signal LEDS freely programmable
CMOS battery compartment accessible from outside
Operating system preinstalled and activated, recovery and
restore CDs provide help in event of system failure
Innovation cycle 3-5 years, guaranteed availability of spare
parts for 5 years
Installation compatible for all device generations, software
compatible with predecessor model
3/26
Siemens AG 2009
Industrial PC
SIMATIC Box PC
SIMATIC Box PC 627B
Application
The SIMATIC Box PC 627B provides mechanical engineers,
plant engineers, and control cabinet makers with a high-performance, compact PC platform for application at the machine or
in the industrial environment for:
Measuring and controlling of process and machine data
(e.g. automated washing systems, robot controls)
Operating and visualization tasks with separate display/monitor solutions (e.g. information terminals, large-scale displays
in automotive production)
Data acquisition and processing (e.g. production data
acquisition, distributed process control)
Motion Control
The SIMATIC Box PC 627B has CE certification for use in the
and small businesses. In addition to industrial applications, it
can also be used in building services automation or in facilities
open to the public.
It can also be integrated in confined spaces thanks to the low
mounting depth of 100 mm (80 mm without CD drive).
Design
Basic design
Rugged metal installation housing, resistant to vibrations and
shocks, with high electromagnetic compatibility
2 free PC expansion slots
Graphics onboard 1600 x 1200, 85 Hz, 32-bit colors
Interfaces (accessible from one side):
- DVI-I graphics interface
- 4 x USB 2.0
- 1 x serial (COM1)
Two 7-segment displays and two LEDs for status indication
Flash drive: SIMATIC PC CompactFlash (can be plugged in
from the outside)
SIMATIC Box PC 627B: Connections and Expansions

All-metal housing, built-in unit,
also suitable for portrait assembly
1 x internal LVDS
for connecting an LCD monitor
1 x DVI-I (VGA via adapter)
Expansion slots:
2 x PCI (1 x short, 1 x long)
optional 1 x PCI and 1 x PCIe x4
Externally accessible battery

compartment for fast replacement of the CMOS battery
Installation slot for CompactFlash Card

(accessible from outside)
COM1: Serial interface 1
Power Supply
120 / 230 V AC
4 x USB 2.0 interfaces
On-/Off switch
2 x Gigabit Ethernet connection

for 10/100/1000 Mbit/s
Optical drive:
DVD +/-R/RW
1 x PROFINET
(3 Ports, optional)
Power supply fan
On rear:
Freely programmable
2 x 7-segment display, 2 x LEDs
3/27
Siemens AG 2009
Industrial PC
SIMATIC Box PC
SIMATIC Box PC 627B
Ordering data
Order No.
Order No.
Configuration 1)
Z
SIMATIC Box PC 627B
Graphics on-board, 128 MB
dyn. shared memory;
2 x 10/100/1000 Mbit/s
Ethernet RJ45; 4 x USB V2.0
(high current); 1 x serial
(COM1), RAID controller onboard; CompactFlash drive No.
1 at front (without CF); watchdog, temp./fan monitoring
6ES7 647-6B 7 7 7 - 7 7 7 7
Processors:
Celeron M 440 (1.86 GHz,
1MB L2, 533 MHz FSB)
L2, 533 MHz FSB); PROFIBUS/
MPI; 2 MB battery-backed
SRAM
L2, 533 MHz FSB); PROFINET
(3 x RJ45, CP1616 compatible);
2 MB battery-backed SRAM
2MB L2, EM64-T, 667 MHz FSB)
2 MB L2, EM64-T); PROFIBUS/
MPI; 2 MB battery-backed
SRAM
Core 2 Duo T7400 (1,66 GHz,
2 MB L2, EM64-T);
PROFINET (3 Port switch
RJ45, CP1616 compatible);
2 MB battery-backed SRAM;
4 MB L2, EM64-T, 667 MHz FSB)
4 MB SLC, EM64-T, 667 MHz
FSB); PROFIBUS/MPI; 2 MB
battery-backed SRAM;
FSB); PROFINET (3 Port switch
RJ45, CP1616 compatible);
2 MB battery-backed SRAM;
256 MB DDR2 667 SODIMM
PC slots:
2 x PCI free
1 x PCI, 1 x PCIe (x4) free
PCI interface card with

COM2+LPT (1 PCI free)
COM2+LPT (1 PCIe x4 free)
4
5
A
B
160 GB HDD SATA
160 GB HDD SATA +

DVD+/-RW
2 x 80 GB SATA (2.5)
2 x 80 GB SATA (2.5) +
DVD+/-RW
RAID1 2 x 80 GB SATA (2.5)
RAID1 2 x 80 GB SATA (2.5)

+ DVD+/-RW
CompactFlash drive No. 2
installed (instead of HDD,
ODD, without CF)
without drives
0
2
2 GB DDR2 667 SODIMM
H
W
Operating system 2):

Windows 2000 Prof. multi-language SP4 (Eng, Fr, Ger, It, Sp)
Windows XP Prof. multi-language SP2 (Eng, Fr, Ger, It,
Sp)
Windows Vista Ultimate MultiLanguage (Eng, Ger, Fr, It, Sp)
+ at least 512 MB memory
Windows XP Embedded
(SP2) English on 2 GB CompactFlash (at least 512 MB
memory, no RAID1)
6ES7 647-6B 7 7 7 - 7 7 7 7
80 GB HDD SATA + DVD+/-RW
3/28
Drives:
80 GB HDD SATA
Country-specific version/power
supply:
110/230 V AC industrial power
supply with Namur; European
power cable
supply Namur; UK power cable
supply Namur; power cable for
Switzerland
supply Namur; US power cable
supply Namur; Italian power cable
supply Namur; Chinese power cable
24 V DC industrial power supply
SIMATIC Box PC 627B
A
B
Expansion:
No expansion (software)
software included
software included
SIMATIC PC
DiagMonitor & Image Creator
software included
1
2
3
Accessories
A
Memory expansion
256 MB, DDR2 677, SODIMM
6ES7 648-2AG20-0HA0
6ES7 648-2AG30-0HA0
3
4
5
6
1 GB, DDR2 677, SODIMM
6ES7 648-2AG40-0HA0
6ES7 648-2AG50-0HA0

2) Windows XP embedded: at least 512 MB;
RAID1 option
Siemens AG 2009
Industrial PC
SIMATIC Box PC
SIMATIC Box PC 627B
Ordering data
Order No.
Order No.
PCI expansion card with
COM1 and LPT
6ES7 648-2CA01-0AA0
Graphic adapter cable, DVI-I compliant with VGA, 250 mm long;
6ES7648-3AB00-0XA0
Graphic adapter cable, DVI-I

compliant with VGA and DVI-D,
250 mm long; (Y-cable)
6ES7648-3AE00-0XA0

Interfaces upward/downward
6ES7648-1AA10-0YA0
A
6ES7648-1AA10-0YB0
Power cable, bent, 3 m long
SIMATIC PC keyboard
German/international,
USB port
USB mouse
(optical, 3-button)
and PC with adapter
6ES7 648-0CB00-0YA0
6ES7 790-0AA01-0XA0
CompactFlash card
2 GB
6ES7 648-2BF02-0XF0
4 GB
6ES7648-2BF02-0XG0
SIMATIC USB Flash Drive
6ES7 648-0DC40-0AA0
2 MB, USB 2.0,

SIMATIC PC, power cable for

230 V AC, angled, 3 m for Box PC
and Panel PC for
Spain, Sweden
United Kingdom
6ES7 900-1AA00-0XA0
Switzerland
6ES7 900-1CA00-0XA0
USA
6ES7 900-1DA00-0XA0
Italy
6ES7 900-1EA00-0XA0
China
6ES7 900-1FA00-0XA0
A5E00510072
6ES7 900-1BA00-0XA0
for SIMATIC Rack PC

and Box PC 1)

see chapter 7
for power supplies and DC-UPS
see page 3/83
system
see page 3/66
99.1
99.8
Dimensions
295.2
11.2
2.4
5.5
265
269.8
78.5
G_KT01_EN_00329
Dimensions in mm
3/29
Siemens AG 2009
Industrial PC
SIMATIC Box PC
SIMATIC Box PC 827B
Overview
Benefits
Intel processorc: Core 2 Duo or Celeron M
Intel chipset: 945GM Express + ICH7R
Intel graphic media accelerator GMA 950
PCI-Express technology
DDR2 667 memory technology up to 4 MB
SATA hard disks up to 160 MB
The SIMATIC Box PC 827B is optimized for high-performance

PC applications and for installation direct at the machine.
It offers:
Maximum performance at
high flexibility
High flexibility and expandability

Flexible installation in many different positions with mounting
brackets or portrait installation kit
On-board: PROFINET or PROFIBUS interface and RAID1
controller (optional)
4 x PCI and 1 x PCIe-Express (x4) or 2 x PCI and
3 x PCIe (x4)
2 LAN 10/100/1000 Mbits/s connections (Gbit LAN with
teaming capability)
4 Hi-Speed USB-2.0 ports
of 55 C
positions
High EMC for safe operation
2 CompactFlash Drives, both accessible from outside
(one of them optional)
High system availability and user friendliness
All interfaces and control/display elements on one side to
allow optimum installation in control cabinet
High degree of data security thanks to mirror disk system
(optional)
2 x 7-segment display, 2 freely-programmable signal LEDs
CMOS battery compartment accessible from outside
Preinstalled and activated operating system, fast restoration
of delivery state of hard disk contents with recovery and restore CDs
Cost reduction through high degree of investment
protection
Availability for 3-5 years, secured spare part availability
for 5 years
Installation-compatible beyond device generations, softwarecompatible with predecessor model
3/30
Siemens AG 2009
Industrial PC
SIMATIC Box PC
SIMATIC Box PC 827B
Application
The SIMATIC Box PC 827B provides mechanical engineers,
plant engineers, and control cabinet makers with a high-performance, compact PC platform for application at the machine or
in the industrial environment for:
Measuring, testing, open-loop and closed-loop control of
process and machine data (e.g. filling plants, packaging
machines, machines for the semiconductor industry, CD/DVD
production machines)
Operating and visualization tasks with separate display/monitor solutions (e.g. information terminals, large-scale displays
in automotive production)
Data acquisition and processing (e.g. wind-driven power
stations, energy management, test systems)
The SIMATIC Box PC 827B has CE certification for use in the
and small businesses. In addition to industrial applications, it
can also be used in building services automation or in facilities
open to the public.
Design
Basic design
Rugged metal installation housing, resistant to vibrations and
shocks, with high electromagnetic compatibility
5 spare PC slots for expansion
Graphics onboard 1600 x 1200, 85 Hz, 32-bit colors
- Interfaces (accessible from one side):
- 2 x LAN 10/100/1000 Mbit/s Ethernet interface
(RJ45, teaming-capable)
- DVI-I graphics interface
- 4 x USB 2.0
- 1 x serial (COM1)
Two 7-segment displays and two LEDs for status indication
Flash Drive: SIMATIC PC CompactFlash
(can be plugged in from the outside)
SIMATIC Box PC 827B: Connections and Expansions

All-metal housing, built-in unit,
also suitable for portrait assembly
1 x internal LVDS
for connecting an LCD monitor
1 x DVI-I (VGA via Adapter)
Expansion slots:
4 x PCI (long), 1 x PCIe x4
optional 2 x PCI and 3 x PCIe x4
Externally accessible battery
compartment for fast
replacement of the CMOS battery
Optical drive:
DVD +/-R/RW
AC Power supply
On-/Off switch
2nd installation slot
for CompactFlash Card
Installation slot for

CompactFlash Card
COM1: Serial interface 1
4 x USB 2.0 interfaces

2 x Gigabit Ethernet connection
for 10/100/1000 Mbit/s
Power supply fan
1 x PROFINET
(3 Ports, optional)
All function elements are

accessible from the front.
Freely programmable
2 x 7-segment display, 2 x LEDs
3/31
Siemens AG 2009
Industrial PC
SIMATIC Box PC
SIMATIC Box PC 827B
Ordering data
Order No.
Order No.
Configuration 1)
Z
SIMATIC Box PC 827B
Graphic onboard, 128 MB
shared memory;
2 x 10/100/1000 Mbit/s
Ethernet RJ45; 4 x USB V2.0
(high current); 1 x serial
(COM1), RAID controller
onboard; CompactFlash drive
No. 1 at front (without CF);
watchdog, temperature/fan
monitoring;
6ES7 647-6N 7 7 7 - 7 7 7 7
Processor:
Celeron M 440 (1,86 GHz,
1 MB L2, 533 MHz FSB)
1 MB L2, 533 MHz FSB);
PROFIBUS/MPI;
PROFINET (3 x RJ45,
CP1616 compatible);
Core 2 Duo T5500 (1,66 GHz,
PROFIBUS/MPI ;
Core 2 Duo T5500
(1.66 GHz, 2 MB L2, EM64-T);
PROFINET (3 x RJ45,
CP 1616-compatible;
4 MB L2, 667 MHz FSB)
4 MB SLC, 667 MHz FSB);
PROFIBUS/MPI;
FSB); PROFINET (3 x RJ45,
CP 1616-compatible; 2 MB
battery-backed SRAM
D
E
0
1
0
1

COM2, LPT1; 1 x PCI,
3 x PCIe free;
PCI card with COM2, LPT1;
3 x PCI, 1 x PCIe free;
1
2
3
4
5
6
A
B
160 GB HDD SATA + DVD+/RW

2 x 80 GB SATA (2.5")
2 x 80 GB SATA (2.5") +
DVD+/-RW
RAID1 2 x 80 GB SATA (2.5")
Expansion (SW):
no expansion(SW)
80 GB HDD SATA + DVD+/RW

160 GB HDD SATA
Operating system 2):

Windows 2000 Prof.
Z
multi-language SP4
(Eng, Fr, Ger, It, Sp)
Windows XP Prof.
Z
multi-language SP2
(Eng, Fr, Ger, It, Sp)
Windows Vista Ultimate multilanguage (Eng, Fr, Ger, It,
Sp); (min. 512 MB memory)
Windows XP Embedded
Z
(SP2) D) English on
2 GB CompactFlash;
(min. 512 MB memory;
no RAID1)
P
6ES7 647-6N 7 7 7 - 7 7 7 7
2 x PCI, 3 x PCIe (x4) free;
RAID1 2 x 80 GB SATA (2.5")

+ DVD+/-RW
CompactFlash Drive Nr. 2 at
front (instead of HDD, ODD,
without CF)
without drives
3/32
Expansions (HW):
4 x PCI, 1 x PCIe (x4) free
Drives:
80 GB HDD SATA
Country-specific version/
power supply:
110/230 V AC industrial power supply with Namur; European power
cable
supply Namur; UK power cable
supply Namur; power cable for
Switzerland
supply Namur; US power cable
110/230 V AC industrial power supply Namur; Italian power cable
110/230 V AC industrial power supply Namur; Chinese power cable;
24 V DC industrial
power supply
SIMATIC Box PC 827B
E
software included
SIMATIC PC Image Creator E
software included
SIMATIC PC DiagMonitor and E
Image Creator
software included
G
H
W
X
A
X
0
1
2
3

2) Windows XP Embedded: at least 512 MB;
RAID1-Option not selectable
P) Subject to export regulations: AL: N and ECCN: 4A994B1
Siemens AG 2009
Industrial PC
SIMATIC Box PC
SIMATIC Box PC 827B
Ordering data
Order No.
Accessories
Order No.
SIMATIC PC keyboard
USB port
USB mouse
(optical, 3-button)
and PC with adapter
Memory expansions
A
A
6ES7648-2AG20-0HA0
6ES7 648-0CB00-0YA0
6ES7648-2AG30-0HA0
6ES7648-2AG40-0HA0
6ES7648-2AG50-0HA0
PCI expansion card

with COM2 and LPT
6ES7648-2CA01-0AA0
CompactFlash Card
2 GB
A
A
6ES7 648-2BF02-0XF0
Graphic adapter cable,

DVI-I compliant with VGA,
250 mm long;
6ES7648-3AB00-0XA0
4 GB
6ES7 648-2BF02-0XG0
8 GB
6ES7648-2BF02-0XH0
Graphic adapter cable,

DVI-I compliant with VGA and
DVI-D, 250 mm long; (Y-cable)
6ES7648-3AE00-0XA0
SIMATIC USB Flash Drive
6ES7 648-0DC40-0AA0
6ES7 790-0AA01-0XA0
2 GB, USB 2.0,

metal enclosure, boot capability

Interfaces upward/downward
6ES7648-1AA30-0YA0
6ES7648-1AA30-0YB0
Power cable, bent, 3 m long

SIMATIC PC, power cable
for 230 V AC, angled, 3 m
for Box PC and Panel PC for
Spain, Sweden
United Kingdom
6ES7 900-1AA00-0XA0
Switzerland
6ES7 900-1CA00-0XA0
USA
6ES7 900-1DA00-0XA0
Italy
6ES7 900-1EA00-0XA0
China
6ES7 900-1FA00-0XA0
A5E00510072
6ES7 900-1BA00-0XA0
see chapter 7
for power supplies and
DC-UPS
see page 3/83
for SIMATIC Rack PC

and Box PC 1)

system
see page 3/66

3/33
Siemens AG 2009
Industrial PC
SIMATIC Box PC
SIMATIC Box PC 827B
Dimensions
173.2
Optical drive

3/34
G_KT01_EN_00343

2.4
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Introduction
Overview
Ultra-compact and maintenance-free Panel PC in embedded
technology
Only 75 mm mounting depth (19" display: 98 mm)
No rotating parts (without fan and hard disk)
High security due to the Microsoft Windows XP embedded
operating system
Ready-to-use devices with optionally preinstalled software
- HMI: Innovative HMI software WinCC flexible (incl. archives
and recipes)
- RTX: with real-time capable software PLC WinAC RTX
Expandable with PC/104(+) plug-in cards
Retentive memory on board (NV-RAM, usable with WinAC
RTX)
SIMATIC Panel PCs are suitable thanks to their high industrial
compatibility both for use in control cabinets, consoles and control panels, as well as directly on the machine. Typical areas of
application can be found in both production and process automation.
There is a broad range of robust, high-performance SIMATIC
Panel PCs available for different requirements.
Shared industrial functionality
High-quality components and modules with a high MTBF
(mean time between failure), which also ensure 24-hour
operation in the extended temperature range.
High swing/shock capacity of the devices through special
hard-disk suspensions, locked connectors and card retainers
Rugged housing model with high electromagnetic compatibility (EMC) and integrated industrial power supplies (also as
per NAMUR)
Service-friendly device design
Bright, brilliant displays in different sizes up to 19"
Same front panel mounting dimensions and uniform front design across all device families
Rugged fronts protected from dust, humidity and chemical
substances (front-side IP65 / NEMA 4 degrees of protection)
Industrial functionality and openness at an attractive price

All versions available from stock
Rugged design for industrial use
Can be expanded using PCI slots and further ports
Flexibility and compactness with maximum performance
High performance thanks to latest process technology from
Intel
Dual Core technology: Up to Intel Core 2 Duo 2.16 GHz
Compact structure with simultaneous expandability through
PCI/PCIe slots
Strong communication through two Ethernet and integrated
PROFIBUS DP/MPI interfaces
Control and computer units can be separated by up to 30 m
RAID1 controller on board
Retentive memory on board
(NV-RAM, usable with WinAC RTX)
3/35
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Introduction
embedded
Design
Centralized configuration
Distributed configuration
(via remote kit)
I2)
Display
Size
12"/15"/19 TFT
12"/15"/19 TFT
12/15/15 INOX/17/19 TFT
Resolution
800 x 600 / 1 024 x 768 /

1 280 x 1 024
800 x 600 / 1 024 x 768 /

1 280 x 1 024
800 x 600 / 1 024 x 768 /

1 280 x 1 024
Operator controls
Membrane keyboard
I1)
I1)
Touch screen
General features
I/
Power supply
24 V DC / 110/230 V AC
/I
I/I
Processor
Intel Celeron M 1.0 GHz;

Intel Pentium M 1.4 GHz
Intel Celeron M 1.86 GHz
Intel Celeron M 1.86 GHz;

Intel Core 2 Duo 1.66 GHz;
Intel Core 2 Duo 2.16 GHz
Main memory
1 GB or 2 GB
1 GB, expandable to 4 GB
1 GB; 2 GB;
3 GB; 4 GB
Expansion slots
3 x PC/104 2); 2 x CF-Slot

(1 x accessible from outside)
2 x PCI 3); 1 x CF slot

2 x PCI or 1 x PCI and

1 x PCIe x4 3); 1 x CF slot
Operating system
Windows XP embedded
on CF Card
None;
Windows XP Professional MUI
None;
Windows 2000 Professional MUI;
Windows XP Professional MUI;
Windows Vista Ultimate MUI;
Windows XP embedded on CF
Interfaces
PROFIBUS / MPI
PROFINET
Ethernet
4)
4)
10/100/1 000 MBit
10/100/1 000 MBit
10/100/1 000 MBit
PS/2 (mouse/keyboard)
USB
Serial interface
Audio in/out
Graphics interface
Parallel interface
Ambient conditions
Vibration load during operation
1g
0.25 g
Shock loading during operation
5g
1g
Permissible temperature during ope- +5 +50 C

ration with maximum configuration
1g
5g
+5 +45 C
8)
+5 +50 C 5)
Power loss in maximum

configuration
12/15 display
17/19 display
Available
Not available
3/36
80 W 6)
110 W
6)
140 W 7)
140 W 7)
7)
163 W 7)
163 W
1)
12/15 displays
2)
With optional expansion rack
3)
All slots with card retainer
4)
Expandable via plug-in card
5)
With 17"/19" Touch: +5 ... 45 C; max. 50 C in installation space, if at the front max. 40 C
6)
3 W taken into account for each PC/104 slot
7)
15 W taken into account for each PCI/PCIe slot
8)
max. 50 C in installation space, if at the front max. 40 C
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Overview
Embedded PC platform with extremely high industrial compatibility for demanding tasks in the field of PC-based automation
Maintenance-free (no rotating components such as fan and
hard disk)
Rugged construction: The PC is resistant to the harshest mechanical stress and is extremely reliable in operation
Compact structure (only 75 mm mounting depth for 12"/15")
Fast integration capability
Front panel versions:
- 12 and 15 TFT Touch
- 12 and 15 TFT Key
- 19" Touch
Benefits
Excellent industrial compatibility due to rugged construction,
even when subjected to extreme vibration and shock
High level of investment security thanks to assured spare
parts availability of the components (for 5 years following the
end of active marketing)
Excellent continuity of components for machine concepts with
a long service life without any new engineering costs
Savings in time and costs due to service-friendly equipment
construction:
- Front and rear USB 2.0 interfaces for quick and easy
connection of additional hardware components
High degree of industrial functionality thanks to integrated
PROFIBUS DP/MPI and Ethernet interfaces
Maintenance-free due to lack of rotating components
(fan and hard disk)
Reduction in standstill times thanks to high system availability
- Efficient self-diagnostics (SIMATIC PC DiagMonitor)
- High reliability and security of an embedded platform
Integral part of Totally Integrated Automation (TIA):
- Enhanced productivity, reduction of engineering costs,
reduction of lifecycle costs
Turnkey complete solution is supplied (the software is already
installed and preconfigured) for visualization and automation
in combination with WinCC flexible and WinAC RTX
Application
SIMATIC Panel PC 477B embedded is designed for use direct at
the machine, where the focus is on a combination of ruggedness
and maximum reliability (the reliability of an embedded platform), and the openness of a PC is also required (e.g. module
expansion and the connection of I/O devices such as printers,
keyboards, etc.).
Due to the minimal mounting depth, it can also be used in
confined spaces.
The PC can be used in production automation as well as in
process automation and can be mounted in control cabinets,
control desks, 19" cabinets/racks and in gantries.
A SIMATIC Panel PC is the ideal platform for PC based Automation:
PC based visualization on-site at the machine with SIMATIC
WinCC flexible
PC based Control with SIMATIC WinAC RTX
SIMATIC WinCC Web client for Web-based solutions with
WinCC/Web Navigator
SIMATIC WinCC Standard Client
Siemens offers the complete set of building blocks of automation
components that are designed to interact perfectly.
3/37
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Design
The Panel PC 477B embedded is a compact unit comprising an
operator control unit with an integrated computing unit.
Standard components of the computer unit:

Rugged metal housing, resistant to vibrations and shocks,
with high electromagnetic compatibility.
Processor:
- Intel Celeron M 1.0 GHz
Main memory basic configuration:
- 1 GB (DDR2 SDRAM)
- Battery-buffered retentive memory 2 MB
Compact Flash Drive (internal) with pre-installed Windows XP
embedded (Image) and optional software
Graphics on board (VGA analog, 1280 x 1024)
Interfaces:
- 2 x Ethernet on board (10/100/1000 Mbit/s)
- PROFIBUS DP/MPI on board, floating
- 5 x USB 2.0 port, 500 mA (1 x front)
- 1 x COM1 (RS232)
- 1 x DVI-I (for connecting a second display unit)
Free slots for expansion:
- 1 x Compact Flash Slot (accessible from outside)
- 3 x PC/104 (over expansion frame)
Power supply: 24 V DC
Components of the operator control unit:

The operator control units are available in the following versions:
12" Key
12.1" TFT color display, 800 x 600 pixels (SVGA)
Membrane keyboard with international PC character set and
36 additional function keys and an integrated mouse
12" Touch
Resistive analog touch screen
15" Key
15.1" TFT color display, 1024 x 768 pixels (XGA)
36 additional function keys and an integrated mouse
15" Touch
19" Touch
19.1" TFT color display, 1280 x 1024 (SXGA)
The components are equipped with an USB 2.0 interface at the
front for connecting external I/O devices such as a mouse or
keyboard and fulfill the requirements of degree of protection
IP65 and NEMA 4. All computing units are also optionally
available with a front USB interface.
Note:
Further information can be found under
"Expansion components"
3/38
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Ordering data
Order No.
Order No.
Versions for "Embedded Automation", TIA applications
Ready-to-use Panel PC
477B as a WinCC Standard
Client
WinCC V7.0 is already
installed and set up on the
4 GB compact flash card as a
standard client.
The Panel PC 477B has a
24 V DC power supply and
has 2x Ethernet 1Gbit/s,
4x USB 2.0,
1x COM1 (RS232).
Available solutions:
15" Touch,
Celeron 1.0 GHz processor
with 1 GB of main memory
15" Touch,
Pentium M 1.4 GHz
processor with 2 GB of main
memory
19" Touch,
Celeron 1.0 GHz processor
19" Touch,
Pentium M 1.4 GHz
processor with 2 GB of main
memory
(preferred versions from stock

embedded
6ES7 676-3DA20-0DS0
6ES7 676-3GA30-0DS0
6ES7 676-6DA20-0DS0
6ES7 676 - 7 AA 0 0 - 0 7 A 0
Front panels
12 TFT Touch
15 TFT Touch
Mass storage
CompactFlash 2 GB
CompactFlash 4 GB
D
A
Frontpanels
12 TFT Touch
12 TFT Key
15 TFT Touch
15 TFT Key
19 TFT Touch
Mass storage
CompactFlash 2 GB
CompactFlash 4 GB
6ES7 676-6GA30-0DS0
Celeron 900 MHz processor,

1 GB RAM, without fieldbus
interface1), Windows XP
embedded operating system
pre-installed
With Windows XP
embedded operating
system preinstalled
6ES7 676- 7 B A 0 0 - 0 7 7 0
Celeron M 1.0 GHz processor,

main memory 1 GB DDR2
SDRAM,
power supply 24 V DC, 2x
Ethernet 1 Gbit,
PROFIBUS DP interface
Version for embedded PC applications

embedded
Software packages
With Windows XP
embedded operating
system (EN/DE)
preinstalled
RTX (DP), Windows XP
WinAC RTX preinstalled and
HMI (PN/DP), Windows XP
WinCC flexible RT
(incl. archives/recipes)
preinstalled
- Number of tags 128 PT

HMI/RTX (DP)
Windows XP embedded
for PROFIBUS
1) Not retrofittable since it is a placement option

3/39
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Ordering data
Order No.
Order No.
(continued)
SIMATIC Panel PC
477B embedded
SIMATIC Panel PC
477B embedded
(continued)
6AV7 85 7 - 0A 7 7 7 - 7 7 A0
6AV7 85 7 - 0A777 - 7 7 A0
Software packages
Front panels
12 TFT Touch
12 TFT Key
15 TFT Touch
15 TFT Key
19 TFT Touch
Processor
Celeron M 1.0 GHz
PROFIBUS DB12
PROFINET
Pentium M 1.4 GHz
PROFIBUS DB12
PROFINET

HMI/RTX (DP)
Windows XP embedded
for PROFIBUS
With CF card 2 GB
With CF card 4 GB
G
H
J
Main memory
1 GB DDR2 SDRAM
2 GB DDR2 SDRAM
Second CompactFlash slot

(externally accessible)

HMI/RTX (PN)
Windows XP embedded
for PROFINET
With CF card 2 GB
With CF card 4 GB
- Not fitted
- fitted with CF card 2 GB
- fitted with CF card 4 GB
Software packages
preinstalled
With CF card 2 GB
3B
With CF card 4 GB
4B
With operating system

(DP/PN) and HMI, Windows
XP embedded preinstalled,
WinCC flexible RT (incl.
archives/recipes) preinstalled
With CF card 2 GB
With CF card 4 GB

RTX Windows XP embedded
With CF card 2 GB
With CF card 4 GB
WinAC RTX (DP),

WinAC RTX (PN),
configured for PROFINET
Please note:
C
K
The scope of supply of the Panel PC 477B mainly comprises the

Panel PC and a software pack that contains the CompactFlash
card with preinstalled and configured software as well as all the
necessary license keys. Only after the CompactFlash card has
been inserted in the (internal) slot provided is the unit ready for
switching on.
Note:
Further embedded versions based on Microbox PC are listed
under SIMATIC PC-based Control.
3/40
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Ordering data
Order No.
Order No.
Accessories
Cover foil for Panel

PCs 477/577/677/877

V4.0

for 12" Touch
6AV7 671-2BA00-0AA0

SIMATIC PCs,
(German/English)
for 15" Touch
6AV7 671-4BA00-0AA0
SIMATIC PC Image Creator V2.1 B
for 19" Touch
6AV7 672-1CE00-0AA0
Labeling foil for Panel

PCs 477/577/677/877
6AV7 672-0DA00-0AA0

V2.1

Touch pen
6AV7 672-1JB00-0AA0
A5E00509961

36 months service option 1)
6ES7 648-6CA04-0YX0
6ES7 648-6BA02-1YX0
3
B
6ES7 648-6AA02-1YX0
6ES7 648-0DC40-0AA0
6FC5 235-0AA05-1AA2
6AV6 671-3AH00-0AX0
Compact Flash Card

2 GB
6ES7 648-2BF01-0XF0
4 GB
6ES7 648-2BF01-0XG0
6AG4 070-0BA00-0XA0
Software tool for hard-disk partitioning for SIMATIC PCs, incl.

manual, on CD-ROM
(Eng/Ger/Fr/Sp/It)
bootable
4 x USB 2.0, IP65 for control
cabinet door or DIN rail

(packing unit contains 6
expansion frames)
3/41
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Dimensions
W+1 (cutout)
H+1 (cutout)
Touch panels
12"
15"
19"
Key panels
12"
15"
Installation cutouts
W
400
483
483
310
310
400
483
483
310
355
Touch panels
W+1
H+1
12"
15"
19"
368
450
450
290
290
380
Key panels
W+1
H+1
12"
15"
450
450
290
321 *
* In addition: two 25 x 5 mm recesses on the top side

for keyboard slide-in label channels
G_ST80_XX_00290Y
Front dimensions
Operating unit and complete unit
More information
You will find more information on the Internet at:

http://www.siemens.com/panel-pc
T
Note:
Touch panels
12"
15"
19"
289
289
307
3
3
11
75
75
98
Key panels
12"
15"
289
324
3
3
75
75
All dimensions without screw protrusions
3/42
G_ST80_XX_00283
Operator panels PC 477B
Do you need a specific modification or expansion to the

products described here? Then refer to "Customer-specific
products". Information is available here about additional,
generally available sector products as well as the possibilities
for customer-specific modification and adaptation.
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Overview
Design
The Panel PC 577B is equipped as follows:
PC with standard industrial capability, full PC openness and

attractive price
Rugged design for industrial use
Touch screen operator units with 12", 15" and 19" TFT display
Expandable using 2 PCI slots
Benefits
High degree of operational safety and minimization of
standstill times even under mechanical stress
Highly expandable by the customer thanks to diverse
interfaces (PCI, CompactFlash, GBit Ethernet, and others)
All versions available at short notice and low cost direct from
stock
Application
The SIMATIC Panel PC 577B is used in manufacturing
automation and process automation. The device has been
designed for installation in control cabinets and consoles,
19" cabinets/racks, and swivel arms (booms).
Thanks to its full PC openness and the powerful Celeron M
processor, it can be used for a host of different applications.
Computing unit
Rugged metal housing for industrial use
Processor: Intel Celeron M 440/1.86 GHz with Mobile Intel
945G chipset
Main memory configuration: 1 GB
Hard disk 80 GB (3.5" SATA) with vibration-absorbent hard
disk holder guarantees reliable operation even under
conditions of high mechanical stress
Graphics onboard
Interfaces:
- 2 x 10/100/1000 Ethernet
- 4 x USB 2.0 port, (500 mA) + 1 x front interface
- 1 x serial V.24 (9-pin)
- 2 x PCI (slots with card retainer)
- 1 x slot for Compact Flash Card (externally accessible)
Power supply: 100/240 VAC, (autorange), 50/60 Hz
DVD RW R combo drive
Operating unit
Operating units are available in the following sizes/resolutions:
12" Touch: 12.1" TFT color display, 800 x 600 pixels (SVGA)
15" Touch: 15.1" TFT color display, 1024 x 768 pixels (XGA)
19" Touch: 19.1" TFT color display, 1280 x 1024 pixels (SXGA)
The operating units have the following functionality:
Analog-resistive touchscreen
Degree of protection IP65 and NEMA 4
USB 2.0 interface on the front for connecting external I/O
devices such as mouse or keyboard
Ordering data
Order No.

6AV7 83 7 - 0BA1 0 - 1C 7 0

Touch front panel with front
USB port
100/240 V AC, with power
cable for Europe and USA
Intel Celeron M 440 / 1.86
GHz (533 MHz FSB, 1 MB
SLC)
Free slots: 2 x PCI
Main memory: 1 GB DDR2
Hard disk drive 80GB SATA
3.5
Front panels
12" TFT Touch
15" TFT Touch
19" TFT Touch
Operating system
Multi-Language1)
P) Subject to export regulations: AL: N and ECCN: 4A994B1

1) Multi-language means: D/E/F/I/SP/CHIN traditional/CHIN
simplified/Korean/Japanese
3/43
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Odering data
Order No.
Order No.
Cover foil for Panel PCs,

set of 10

V4.0

for 12" Touch
6AV7 671-2BA00-0AA0

CD-ROM (German/English)
for 15" Touch
6AV7 671-4BA00-0AA0
for 19" Touch
6AV7 672-1CE00-0AA0
Memory expansion
1 GB DDR2
6ES7 648-2AG40-0HA0
2 GB DDR2
6ES7 648-2AG50-0HA0
Non-heating device cover for

SIMATIC Box PC and Panel
PC

V2.1
6ES7 648-6BA02-1YX0
SIMATIC PC Partition Creator B

V2.1
6ES7 648-6AA02-1YX0
Software tool for data backup

for SIMATIC PCs, incl. manual,
on CD-ROM (Eng/Ger/Fr/Sp/It)

(Eng/Ger/Fr/Sp/It)
SIMATIC PC power cable, 230

V AC, angled, 3 m, for:
Europe: D/F/NL/E/B/A/S/FIN
6ES7 900-1AA00-0XA0
United Kingdom
6ES7 900-1BA00-0XA0
2 GB, USB 2.0; metal

enclosure, bootable
Switzerland
6ES7 900-1CA00-0XA0
USA
6ES7 900-1DA00-0XA0
Italy
6ES7 900-1EA00-0XA0
6ES7 900-1FA00-0XA0
4 x USB 2.0 interfaces, IP65 for

control cabinet door or DIN rail
assembly
SIMATIC PC USB FlashDrive A
China
Touch pen
6AV7 672-1JB00-0AA0
6ES7 648-0DC40-0AA0
6FC5 235-0AA05-1AA2
A
6AV6 671-3AH00-0AX0
Communication components
Undetachable pen for

operation of the touch devices,
mounting of the support on the
control cabinet
6ES7 648-6CA04-0YX0
PCI interface card

Z
A5E00509961
6ES7 648-2CA01-0AA0
With COM1, COM2 and LPT

interfaces

3/44
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Dimensions
Touch panels
12"
15"
19"
289
289
378
271
271
271
141
138
147
11
11
11
53
24
18
369
367
376
71
42
36
G_ST80_XX_00317
Control unit and complete device
W+1 (cutout)
H+1 (cutout)
Touch panels
12"
15"
17
19"
Installation cutouts
W
400
483
483
483
310
310
400
400
Touch panels
W+1
H+1
12"
15
17"
19"
368
450
450
450
290
290
380
380
G_ST80_XX_00239
Front dimensions
3/45
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Overview
Benefits
PC platform with high degree of industrial compatibility for

demanding tasks in the area of PC-based automation.
Rugged construction:
The PC is resistant to the harshest mechanical stress and is
reliable in operation.
Compact design
Fast integration capability
Front panel versions:
- 12", 15", 17" and 19" TFT Touch
- 12" and 15" TFT Key
- 15" TFT Touch, stainless steel/INOX
The operator control unit and computing unit can be placed
30 m apart (optional).
Excellent industrial compatibility due to rugged construction,

even when subjected to extreme vibration and shock
High level of investment security thanks to assured spare
parts availability of the components (for 5 years following the
end of active marketing)
Excellent continuity of components for machine concepts with
a long service life without any new engineering costs
Savings in time and costs due to service-friendly equipment
construction:
- Operator control unit and computer unit can be simply
hinged open for fast replacement of components or for future
expansion
- USB 2.0 interfaces on the front and rear for quick and easy
connection of additional hardware components
High degree of industrial functionality thanks to integrated
PROFIBUS DP/MPI or PROFINET interfaces (CP1616compatible) and 2 GB Ethernet interfaces
Operational reliability
Using the optional direct control key module, the process can
be operated without delay over PROFIBUS DP independently
of the operating system
2 x 80 GB SATA hard disk system (configured as a single
disk system or RAID1)
Reduction in standstill times thanks to high system availability
Efficient self-diagnostics (SIMATIC PC DiagMonitor):
- Solutions for preventative data security
Integral component of Totally Integrated Automation (TIA):
- Enhanced productivity, reduction of engineering costs,
reduction of lifecycle costs
- Spatially separated configuration of computer and operator
control unit possible with the Remote Kit (up to 30 m,
optionally available as accessories)
Application
SIMATIC Panel PC 677B is designed for use directly at the
machine. Due to the minimal mounting depth of only 105/
130 mm, it can also be used in confined spaces.
The PC can be used in production automation as well as in
process automation and can be mounted in control cabinets,
control desks, 19" cabinets/racks and in gantries.
The Dual Core CPUs with Intel Core 2 Duo technology support
simultaneously high performance control and visualization.
With PCIe (x4), the new PCI express (PCIe) cards (x1 and x4) are
also supported.
The integrated NV-RAM is supported from WinAC RTX 2005 SP2
and with DC power supply.
A SIMATIC Panel PC is the ideal platform for PC based
Automation:
PC based visualization on site at the machine with SIMATIC
WinCC flexible
Complex solutions with SIMATIC WinCC process visualization
PC-based Control with SIMATIC WinAC Software PLC or with
SIMATIC WinAC Slot PLC
Siemens offers the complete set of building blocks of automation
components that are designed to interact perfectly.
The SIMATIC Panel PCs can be ordered in combination with
WinCC flexible or WinCC as SIMATIC HMI packages at a lower
price (see SIMATIC HMI complete systems).
3/46
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Design
The Panel PC 677B comprises a computer unit and an operator
control unit.
Components of the computer unit:
Rugged metal housing, resistant to vibrations and shocks,
with high electromagnetic compatibility.
Processor:
- Mobile Intel 945G chip set
- Intel Celeron M 440/1.86 GHz or
- Intel Core 2 Duo T5500 / Dual Core, 1.66 GHz or
- Intel Core 2 Duo T7400 / Dual Core, 2.16 GHz
Main memory basic configuration: 1 GB
3.5" SATA hard disk: 80 GB;
the special vibration-absorbing hard disk ensures reliable
operation even under extreme mechanical stress
Graphics on board
Interfaces:
- 2 x 10/100/1000 Ethernet
- PROFIBUS DP/MPI on board, floating
- PROFINET (IRT-capable), 3-port, switching-enabled,
CP1616-compatible
- 4 x USB 2.0 connection
- 1 x serial V.24 (9-pin)
Retentive memory:
- 512 KB NV-RAM for Win AC RTX without UPS (DC versions)
- 2 x PCI (slots with card retainer)
- 1 x slot for Compact Flash Card
Power supply: 110 V / 230 V AC (autorange), 50/60 Hz or
24 V DC
Optional additional components:
Main memory expansion to 2, 3 or 4 GB
SATA hard disk 160 GB
Dual hard disk module 2 x 80 GB SATA preconfigured as
single disk configuration or RAID1
Internal CF card slot (empty, instead of hard disk and optical
drive; only with Windows XP embedded operating system)
1x PCIe x4 / 1x PCI instead of 2 x PCI slots
(with card retainers)
Direct control key module (for devices with key front)
Components of the operator control unit:

The operator control units are available in the following versions:
12" Key
36 additional function keys with LED and an integrated mouse
12" Touch
15" Key
36 additional function keys with LED and an integrated mouse
15" Touch
15" Touch stainless steel / INOX
15.1" TFT color display, 1024 x 768 (XGA)
Stainless steel front, designed for use in the food and
beverages industry
Developed on the basis of DIN EN 1672-2
Polished surface (stainless steel 1.4301, line pattern, grainsize 240)
IP66k on front
Without USB front interface
Shatter-protection for the display
Optimized frame surface to allow liquids to run off
Minimized grooves and gaps
Decorative foil tested against chemicals in accordance with
DIN 42115, Part 2
Mounting with clamping frame only. Sealing material food-safe
(EDPM, in accordance with FDA 21 CFR 177.2006)
Prepared for EHEDG certification for the entire machine
17" Touch
17,1" TFT color display, 1280 x 1024 pixels (SXGA)
Installation compatible to 19" touch
19" Touch
19.1" TFT color display, 1280 x 1024 pixels (SXGA)
The operator control units feature a USB 2.0 port on the front for
connecting external peripheral devices, such as a mouse or
keyboard. They fulfill the requirements of degree of protection
IP65 and NEMA 4. All operator control units are also available
without a USB port on the front.
The computer unit is connected via a connecting cable attached
at the rear of the operator control unit.
Note:
Further information can be found under
"Expansion components".
3/47
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Ordering data
Order No.
Order No.
Panel PC configurator (contract-based production and delivery)
Panel PC configurator (continued)
Front panels
12" TFT Touch
12" TFT Key
6AV7 87 7 - 7 7 7 77 - 777 0
6AV7 87 7 - 777 7 7 - 7 7 7 0
Main memory
1 GB DDR2
2 GB DDR2
15" TFT Touch
3 GB DDR2
15" TFT Key
4 GB DDR2
17" TFT Touch
19" TFT Touch
Mass storage
80 GB SATA hard disk
160 GB SATA hard disk
RAID1 dual hard disk

module
2 x 80 GB SATA, preconfigured
Dual hard disk module
2 x 80 GB SATA
Second CF card slot (only in
combination with Windows
XP embedded), internal, not
fitted, only with version
without opt. drive and without
HDD
Front options
With front USB interface
Without front USB interface
INOX front, without front

USB, with 15" TFT Touch only
2 2
Power supply
24 V DC
110/230 V AC, power cable
for Europe
110/230 V AC (without power
cable)
for UK
for CH
for the USA
for Italy
for China
Processor
GHz, 533 MHz FSB, 1 MB
SLC, slots (spare): 2 x PCI
GHz, 533 MHz FSB,
1 MB SLC, slots (spare):
1x PCIe x4 and 1x PCI
Intel Core 2 Duo T5500 / Dual
Core, 1.66 GHz, 677 MHz
FSB, 2 MB SLC,
slots (spare): 2 x PCI
Core, 1.66 GHz, 677 MHz
FSB, 2 MB SLC,
slots (spare): 1x PCIe x4 and
1x PCI
Core, 2,16 GHz,
677 MHz FSB, 4 MB SLC,
slots (spare): 2x PCI
Core, 2,16 GHz, 677 MHz
FSB, 4 MB SLC,
slots (spare): 1x PCIe x4 and
1x PCI
3/48
A
B
C
3
4
Optical drives
Without
DVDRWR combo drive
Communication interfaces
PROFIBUS/MPI; 2 x Gbit
Ethernet, 2 MB NV-RAM
PROFINET (3 x RJ45,
CP1616-compatible);
2 x Gbit Ethernet,
2 MB NV-RAM6)
G
H
Operating system
Without operating system1)
Multi-Language2) 3)
Multi-Language2)
Multi-Language5)
Windows Server 2003
Standard Edition incl. 5
Clients MUI7), SP1 (SP2
enclosed)
Windows XP embedded
(English)4) on 2 GB CF card
A
B
A
B
C
D
E
1) Not with internal second CF card slot

2) Multi-language means: D/E/F/I/SP/CHIN traditional/CHIN
simplified/Korean/Japanese
3) With Windows 2000, only one core can be used with the dual-core
processors
4) Only without RAID 1 option
5) Multi-language means: D/E/F/I/SP; other languages only by downloading from Microsoft
6) Not with Windows 2000 Professional
7) Multi-language means: D/E/F/I/SP
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Ordering data
Order No.
Delivery variants (from stock)

12 TFT Touch
6AV7 870-0BC20-1AC0
110/230 V AC power supply

Core 2 Duo T5500, 1.66 GHz,
2 x PCI
1 GB RAM, 80 GB HDD,
DVD R RW burner
PROFIBUS/MPI
Windows XP Prof. MUI (SP2)
(D/F/I/SP/CHN traditional/CHN
simplified/Korean/Japanese)
12 TFT Key
6AV7 871-0BC20-1AC0

2 x PCI
DVD R RW burner
PROFIBUS/MPI
15 TFT Touch
6AV7 872-0BC20-1AC0
6AV7 671-2BA00-0AA0
for 15" Touch
6AV7 671-4BA00-0AA0
for 17" Touch
6AV7 672-1CF00-0AA0
for 19" Touch
6AV7 672-1CE00-0AA0
Labeling foils for Panel

PC 477/577/677(B)
6AV7 672-0DA00-0AA0
Memory expansion
1 GB DDR2
6ES7 648-2AG40-0HA0
2 GB DDR2
6ES7 648-2AG50-0HA0
Direct control key module for

Panel PC 677(B)
6AV7 671-7DA00-0AA0
6ES7 648-0AA00-0XA0
Transfer module for interface connection to 16 I/Os

Non-heating apparatus cable
for SIMATIC Box and Panel PC
6AV7 873-0BC20-1AC0
6AV7 874-0BC20-1AC0

2 x PCI
DVD R RW burner
PROFIBUS/MPI
19 TFT Touch

for 12" Touch
Option pack for direct control

key module

2 x PCI
DVD R RW burner
PROFIBUS/MPI
17 TFT Touch
Cover foil for Panel

PC 477/577/677(B)/Flat Panel,
set of 10 each


2 x PCI
DVD R RW burner
PROFIBUS/MPI
15 TFT Key
Order No.
Accessories
SIMATIC PC power cable,

230 V AC, angled, 3 m, for:
Germany
6ES7 900-1AA00-0XA0
United Kingdom
6ES7 900-1BA00-0XA0
Switzerland
6ES7 900-1CA00-0XA0
USA
6ES7 900-1DA00-0XA0
Italy
6ES7 900-1EA00-0XA0
China
6ES7 900-1FA00-0XA0
Mounting elements for

17"/19" Panel PC 577, 677(B)
6AV7 672-8KE00-0AA0
For screw mounting of the 17" and

19" touch front from the front1)
Touch pen
6AV7 672-1JB00-0AA0
A5E00509961

Z
6AV7 875-0BC20-1AC0
6AV7 871-0AA10-1AC0

2 x PCI, 1 GB RAM, 80 GB HDD,
DVD R RW burner
PROFIBUS/MPI
12" TFT Key with DC power
supply
Celeron M440, 1.86 GHz, 2 x PCI
512 MB RAM, 80 GB HDD,
DVD R RW burner
PROFIBUS/MPI

1) No longer necessary for the 19" touch front from approximately
December 2008
3/49
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Ordering data
Order No.
V4.0
6ES7 648-6CA04-0YX0

CD-ROM (German/English)
V2.1
6ES7 648-6BA02-1YX0
6ES7 648-6AA02-1YX0
with charger unit for 24 V

lead battery,
input 24 V DC/16 A,
output 24 V DC/15 A
6EP1 935-6MD11
Communication components
PCI interface card
With COM1, COM2 and
LPT interfaces
6ES7 648-0DC40-0AA0
2 GB, USB 2.0; metal enclosure,

bootable
6FC5 235-0AA05-1AA2

SIMATIC Panel PC Remote Kit
for the separate configuration of
control unit and PC
24 V DC, 5 m
A
24 V DC, 10 m
A
6AV7 671-1EA00-5AA1
6AV7 671-1EA01-0AA1
24 V DC, 15 m
6AV7 671-1EA01-5AA1
24 V DC, 20 m
6AV7 671-1EA02-0AA1
24 V DC, 30 m
6AV7 671-1EA03-0AA1
110/230 V AC, 5 m
6AV7 671-1EA10-5AA1
110/230 V AC, 10 m
6AV7 671-1EA11-0AA1
110/230 V AC, 15 m
6AV7 671-1EA11-5AA1
110/230 V AC, 20 m
6AV7 671-1EA12-0AA1
110/230 V AC, 30 m
6AV7 671-1EA13-0AA1
6AV6 671-3AH00-0AX0
4 x USB 2.0 interfaces, IP65 for

control cabinet door or DIN rail
assembly
3/50
6EP1 931-2EC41
for DC UPS module 15 A

(Eng/Ger/Fr/Sp/It)
SITOP power, 15 A DC UPS

module, with USB port
SITOP power, battery module

24 V/3.2 Ah

V2.1
Order No.
Uninterruptible power supplies
6ES7 648-2CA01-0AA0
Siemens AG 2009
Industrial PC
SIMATIC Panel PC
Dimensions
Touch panels
12"
15"
17"
19"
289
289
378
378
271
271
271
271
141
138
147
147
11
11
11
11
53
24
18
18
369
367
376
376
71
42
36
36
Key panels
12"
15"
289
324
271
271
122
141
11
11
42
31
351
370
59
48
L
N
G_ST80_XX_00288
Operating unit and complete unit
Installation cutout
3/51
Siemens AG 2009
Industrial PC
SIMATIC HMI packages with WinCC flexible and WinCC
HMI packages with WinCC flexible and WinCC
Overview
SIMATIC Panel PC with SIMATIC WinCC flexible

SIMATIC Panel PC packages with WinCC flexible are an
innovative solution for simple visualization tasks directly at the
machine in the field of HMI.
This package can only be supplied if a Panel PC is ordered
together with the WinCC flexible Runtime software. It cannot
be ordered subsequently.
In combination with the Panel PC 477B there are turn-key
solutions, i.e. the runtime software is already preinstalled.
3/52
SIMATIC Panel PC with SIMATIC WinCC

The SIMATIC Panel PC packages with WinCC make it easy to
order all the components required for an HMI solution on the
basis of a Panel PC.
This package can only be supplied if a Panel PC is ordered
together with the WinCC software. It cannot be ordered subsequently.
In conjunction with the Panel PC 477B, there are turnkey
solutions as WinCC Standard Clients.
Siemens AG 2009
Industrial PC
SIMATIC HMI packages with WinCC flexible and WinCC
HMI packages with WinCC flexible and WinCC
Ordering data
Order No.
Z
SIMATIC WinCC flexible
Package1) 2)
(incl. Archives and Recipes)
Order No.
6AV6 623 - 2 7 A00 - 0AA0
WinCC flexible 2008 Runtime

128 Power Tags
512 Power Tags
2 048 Power Tags
4 096 Power Tags
SIMATIC WinCC Package1)
6AV6 382 - 2 7 A06 - 2AX0
WinCC V6.2 Runtime2)

128 Power Tags
256 Power Tags
1 024 Power Tags
8 192 Power Tags
65 536 Power Tags

SIMATIC WinCC Package1)
F
Z
6AV6 382 - 2 7 A07 - 0AX0
WinCC V7.0 Runtime 2)

128 Power Tags
512 Power Tags
2 048 Power Tags
8 192 Power Tags
65 536 Power Tags
Ready-to-use Panel PC 477B as

a WinCC Standard Client
WinCC V7.0 is already installed
and set up on the 4 GB compact
flash card as a standard client.
The Panel PC 477B has a 24 V
DC power supply and has 2X
Ethernet 1 Gbit/s, 4X USB 2.0,
1x COM1 (RS232).
Available solutions:
15" Touch,
E
Celeron 1.0 GHz processor with
1 GB of main memory
15" Touch,
E
Pentium M 1.4 GHz processor
19" Touch,
E
Celeron 1.0 GHz processor with
1 GB of main memory
19" Touch,
E
Pentium M 1.4 GHz processor
E)
Z)
1)
2)
6ES7 676-3DA20-0DS0
6ES7 676-3GA30-0DS0
6ES7 676-6DA20-0DS0
6ES7 676-6GA30-0DS0

Only if ordered with a Panel PC
The current version will always be supplied
Note:
For ordering data for Panel PCs and accessories, see
configurators in "SIMATIC Panel PCs
More information
http://www.siemens.de/simatic-hmi
3/53
Siemens AG 2009
Industrial PC
Overview
Application
Our SIMATIC PC Customization Centers convert the field-proven

SIMATIC PCs into individualized products and systems for you
tailored precisely to your specific needs. Our portfolio ranges
from individualized design, through software installation and
special tests or certifications, right up to just-in-time delivery.
This provides you with more time for your own projects while
improving your profitability and thus your competitive advantage.
Customized SIMATIC PC precisely tailored to your
requirements
Benefits
You save time, because...
You can use our extensive customer know-how and our many
years of experience with industrial PCs.
You don't have to build up industrial computer know-how and
can therefore concentrate fully on your own core areas of
expertise.
You increase your return on investment because...
You can limit investment of your capital and resources to your
core areas of expertise.
You achieve reliable, on-time material disposition and logistical planning through our logistical services.
You have the highest possible investment security thanks to
top quality, long-term availability and continuity with the
SIMATIC PC.
You save unnecessary costs thanks to tailored solutions.
You profit from worldwide service and support concepts with
SIMATIC PC.
You increase your competitive advantage because...
You use industrial PCs that meet the highest quality standards,
offer optimum performance and enhance your productivity by
reducing standstill times.
You obtain customized SIMATIC PCs that perfectly link into the
"Totally Integrated Automation" (TIA) system.
You stand out not only thanks to exceptional technology, but
also due to the individual design of your machine, e.g. with a
logo printed on the front casing of the industrial PC.
3/54
Customized Hardware Individual in design and

configuration
Customized design
Inscription or printed logo, e.g. on the front cover of the
housing, matches your corporate design requirements
Custom color design of housing, individual housing components, e.g. housing front and front cover for perfect optical
integration of the PC in the operating environment
Customer-specific configuration
Optimization of the computer configuration
corresponding to the requirements of your application, e.g.
with or without PROFIBUS interfaces or optical drives
Optimal selection of the required components
with regard to performance capability, long-term availability
and compatibility, e.g. processor, fan, work memory, etc.
Installation of the hardware you specified e.g. third-party
hardware such as drives and PC cards or customized,
supplied hardware
Customized Software operating systems, drivers, image
Generation of operating systems
e.g. for Windows XP embedded,
and the RMOS3 real-time operating system from Siemens
for customer-specific pre-installed LINUX operating system1)
Integration and installation of driver software and
image storage
e.g. for additional plug-in cards, controllers and memory
media
for complete, turn-key systems
Siemens AG 2009
Industrial PC
Application (continued)
Customized service and support
Customized logistics
Pre-sales and after-sales support

Requirements analysis, concept creation, solution generation
Competent project support from the offer through to delivery
and beyond
Individual repair concepts
Worldwide Siemens service network with 190 branches and
36 repair centers
24 hour product support over the SIMATIC Hotline
Availability tailored to your requirements

Configuration and design freeze Individual availability
agreements for unchanged hardware and software versions of
the products (image compatibility)
Replacement parts in centralized or decentralized spare
parts storage For individually agreed periods or, where applicable, last-time buying and storage of components
License authorization for discontinued software, e.g. for
Microsoft operating systems such as Windows NT, MS DOS
System test of hardware and software, e.g.

EMC chamber Test for electromagnetic compatibility
Thermal simulation Thermal simulation and heat imaging
camera to detect heat pockets
Heat test Testing of all components in a 36-hour heat test at
40 degrees Celsius in a heated cabinet
Stress test Test for high vibration/shock loading, specially
for CPU, graphics, memory, modules, etc.
Tailor-made right down to the detail

Change notices Individual agreements for customer information management, e.g. product discontinuation, version
updates, phase-out announcements
Individual labeling On the industrial PC and/or product
packaging, e.g. customized item/device/inventory numbers,
warehouse barcodes or packing and safety instructions
Supply of accessories e.g. adapter cables, keyboards or
accompanying documents and manuals
Product Equipment Data (PED)

Online tool PED (www.siemens.de/ped)
For easy, systematic identification and management of device
components. It shows you the most important components of
your equipment (delivery status) easily and quickly and supports you worldwide in the event of a servicing requirement
with the procurement of suitable replacement parts.
"Tempesting" (SITEMP)
TEMPEST (Temporary emanation and spurious transmission)
For protecting compromising data from listening-in attacks by
means of electromagnetic radiation
Series measurements and certification of special PC hardware
according to the standards of the German Institute for Safety
in Information Technology (BSI) for radiation safety
e.g. PC for processing highly sensitive research and development data
Certification and approval of hardware and software
e.g. UL and CE industry certification
On-site service e.g. for plant failure, on-site repairs, product
upgrades
Individual logistics solutions

Kanban delivery We supply according to the requirements
of the organization units in the production process of our customers who organize their production process control in accordance with the Kanban principle. This shortens the
throughput time and reduces inventories.
Just in Time We reduce the inventories and throughput
times of our customers by supplying the hardware manufactured customer specifically at exactly the time when they need
them in the production process or in the logistics chain
Reusable packaging Better than recycling!
The packaging is collected from our customers after the specially manufactured hardware has been unpacked and reused
for transporting the next delivery. Packaging material is saved
to the advantage of our customers and the environment.
1) Suitable for specific LINUX versions in accordance with the
specifications of the Siemens manufacturer's declaration
"Suitable for LINUX", see
http://www.siemens.de/simatic-pc/geeignet-fuer-linux
More information
More information is available on the Internet at
www.siemens.com/customized-pc
or under the e-mail address
[email protected]
3/55
Siemens AG 2009
Industrial PC
SIMATIC PC function cards
Overview
Function
Expansion cards are available for the following functions:
PROFIBUS / PROFINET
Serial interfaces
Additional LAN ports
Digital and analog I/Os
Graphics expansions
Function cards for SIMATIC Box PC 627B/827B and
SIMATIC Rack PC 547B/847B:
Function cards are PC modules that perform customer-specific

extended functions. As they are already tested and qualified,
they can be used in the same way as a standard product.
This enables fully-tested SIMATIC PCs with function cards to be
delivered quickly without complications.
Bus system
Function card with
PCI
2 x RS 232
2 x RS 485
1 x LAN 10/100/1000
PROFIBUS DP
PROFINET (4-port)
PCIe
4 x RS 232 (x1)
1 x LAN 10/100/1000 (x1)
Dual Head graphic (x1)*
Function cards for SIMATIC Microbox PC 427B:

Bus system
Function card with
PC/104+
2 x RS 485
4 x RS 232
Central PC I/O:
PC IO interface module for expansion with
encoder/counter as well as PC IO digital
modules and PC IO analog modules.
In maximum configuration up to 120 analog
IO interfaces, 320 digital IO interfaces and 12
encoder/counter interfaces can be integrated.
* For the SIMATIC Rack PC 847B the option of a graphics card is

available via the standard configurator.
1) For restrictions see the supplement enclosed in the system.
More information
Please address any queries regarding the technical feasibility of
the configuration with function cards to the Customization Center
I IA SE IP CC
www.siemens.com/customized-pc
3/56
Siemens AG 2009
Industrial PC
Customized automation for SIMATIC Panel PC
Overview
This gives an overview of customer-specific modifications of the

SIMATIC HMI products with examples for the various sectors.
It includes both customer-specific product modifications for
fulfilling individual requirements as well as product examples for
selected sectors such as the automotive industry, general
mechanical engineering, the food and beverages industry, and
pharmaceuticals.
OEM products
Product modifications for OEM (original equipment manufacturer) customers are suitable for individual industrial automation
tasks that cannot be solved using standard products or panels
that were simply modified in respect of their design.
Design products
OEM products are individual solutions based on SIMATIC HMI

standard components. They are specified, offered, developed
and supplied on an individual, customer-specific basis.
Customer-specific design involves structural modifications of

SIMATIC HMI products for seamless adaptation to the individual
machine and plant design and the special operating philosophy
of the customers.
For this purpose, we simply combine as in a system of building

blocks - standard components, customized components and
additional software function enhancements required to create a
SIMATIC HMI OEM device.
The possibilities for modification are:

Changing the company logo and device type designation
Changing the keyboard colors, key labels or key symbols
Different housing color (front frame)
Possible modifications:
Changes to the keyboard layout, key size/design and key
arrangement
Freely-definable front dimensions and device mechanics
Integration in the housing for desktop or support arm
installations
Different processors and memory media
Different display technologies, sizes and resolutions
Decentralized configuration
Additional modules or interfaces
Freely-selectable Windows versions as operating system,
preinstalled SIMATIC HMI software packages
Design products are completely compatible with the technology

and functionality of the standard products. The similar
technology enables, among other things, replacement with
standard devices in case of unit failure if the machine or plant
supplier does not have a customized product available in their
own spare parts store at the time.
3/57
Siemens AG 2009
Industrial PC
Customized automation for SIMATIC Panel PC
It is frequently the case, however, that new OEM products can
be based on existing OEM products (see product examples)
efficiently and cost-effectively. In such cases, the end product is
considered to be a customer-specific modification of an existing
OEM product.
Share of customer-specific modifications in the individual

product types
Our OEM devices are available in all performance classes: from

OEM Push Button Panels through Text Displays, Touch and
Operator Panels right up to multifunctional platforms (MP) and
Panel PCs with far-reaching changes in hardware, equipment
and software. Customer-specific OEM products are developed
and produced in various stages in accordance with quality
standards.
Turnkey products
The customer-specific turnkey products are ready to set up and
switch on, combined and constructed according to the specifications of the customer and according to the specific technical
requirements of the HMI products. With turnkey products, the
HMI products are tested and supplied e.g. as complete operator
stations, i.e. installed in special housings, wired and supplied
with the specified software.
Optimized HMI operator station: ergonomic, functional,
certified and tested
Optimum mechanical installation of devices, with defined high
degree of protection
Flexible design and wiring
Variable installation (support arm, stand, wall mounting)
Certified according to VDE, CE and UL (according to
agreement and statutory directives)
Vibration and shock-tested
Packed for safe transport
Tested thermal cycling with passive cooling, and therefore
with specified ambient temperature
Customized software suite with electronic software release
management
Customized SIMATIC HMI turnkey products are "ready-to-install"
and "ready-to-use" with the quality of series products, and all
from one source:
Open Platform Program
SIMATIC HMI panels with Windows CE operating system and
panel PC are open for software function expansions from WinCC
flexible or for customer applications.
Using the Open Platform Program, you have software tools
(SDKs Software Development Kits) including training and
support for creating software expansions for WinCC flexible or
your own customer applications. The Open Platform Program
supports the optimum adaptation and fast implementation of
customized hardware and software solutions:
Customer applications
Expansions of SIMATIC HMI software WinCC flexible using
ActiveX controls
Customers specific project functions or tasks that interact with
WinCC flexible
The basis is the SIMATIC HMI - WinCE platform, i.e. Windows
CE-based SIMATIC HMI panels from TP 177B, as standard
product or as OEM product and also Panel PC products. As an
option, SIMATIC HMI panels can also be used as platforms for
other CE software.
3/58
Product examples from the various industries

SIMATIC HMI products are provided with additional features in
order to facilitate optimum use in specific sectors of industry.
Stainless steel front panels for the food, beverages and tobacco
industry are one such example. With the exception of their front
panels, the devices are identical to standard products in respect
of function and technology.
We can offer products for the following sectors:
Automotive industry HMI for factory automation
General machine construction
Food, beverages and tobacco industries
Chemical and pharmaceutical industries.
Customized products for various industries are developed and
produced in association with a customized product agreement.
Siemens AG 2009
Industrial PC
Panel PC 677B 46"
Overview
Front view with speakers
Interface module
Front view without speakers
Integrated Box PC
Benefits
The rugged design with large display is intended for industrial
use and maintenance-free use. The Panel PC 677B with 46"
display is therefore perfectly suitable for use as an information
display for operator workstations, as quality data display, or as a
plant overview system in the automobile and manufacturing
industries, as well as in the pharmaceuticals industry and the
logistics sector. It can be positioned for ease of viewing using a
support arm system and operated easily by means of remote
control.
Application
Automotive and manufacturing industry

Pharmaceuticals industry
Logistics sector
Industrial application
3/59
Siemens AG 2009
Industrial PC
Panel PC 677B 46"
Design
Ordering data
Degree or protection IP65 on front/IP54 at rear

Box PC 677B computing unit
TFT LCD 46" with 4 mm laminated glass screen
Anti-glare coating
Welding splatter-proof front
Powder-coated sheet-steel housing
Suitable for fixing to support system
Audio amplifier module for up to 3 speaker pairs
46" display suitable for use in industry
Remote control software for operation
Integral audio amplifier
Interface module on the housing
Low-noise operation without air conditioner up to 40 C
ambient temperature
PC without hard disk and without CD for maintenance-free use
Auto-refresh function for display.
Order No.
Box PC 677B built into a housing Z

together with a 46" TFT LCD
(1366x768), Celeron M440, 1.86
GHz, 512 MB RAM, CF drive
1 GB, Windows XP embedded,
without audio amplifier, without
speaker, without air conditioner
6AV7 466-0AC00-0AA0

(1366x768), Celeron M440, 1.86
with audio amplifier, with speaker,
without air conditioner
6AV7 466-0AC20-0AA0

(1366x768), Celeron M440, 1.86
without audio amplifier, without
speaker, with air conditioner
6AV7 466-0AC01-0AA0

(1366x768), Celeron M440, 1.86
with audio amplifier, with speaker,
with air conditioner
6AV7 466-0AC21-0AA0
Delivery time
8 weeks ex work
Minimum quantity
CA product agreement for

delivery logistics
Customer-specific modifications:
Choice of housing color
Configurable computing units:
- Box PC 677B (e.g. with HDD and XP Prof.)
- Box PC 477B
Without computing unit as flat panel
Without audio module
(without speaker and without audio module)
With active heat sink for higher ambient temperatures >50 C
More information
Contacts
Please contact your local/national Siemens HMI representative
More information is available in the Internet at
http://www.siemens.com/hmi-oem
3/60
Siemens AG 2009
Industrial PC
Backplane cover
Overview
Flat Panel with backplane cover, front view
Flat Panel with backplane cover, rear view
PC 477B 15" with backplane cover, front view
PC 477B 15" with backplane cover, rear view
Benefits
The concept of the universal backplane cover is intended for flat
HMI products, e.g.
PC 477B 12" Key,
PC 477B 15" Touch or
MP377 19"/Flat Panel 19" Touch/Display
With VESA 100 on the rear for mounting on support system
Additive housing to the right and/or left
With operator controls, built into the additive housing
Additive housing suitable for all backplane covers
With stainless steel keyboard mounted on backplane cover
With removable panel for easier access to cables
The external dimensions (HxW) of the HMI products remain
unchanged
Application
For general mechanical equipment manufacturing
Design
The backplane cover is fitted with a VESA-100 connection on the
rear
Assembly
- On the support arm
- On the supporting foot (desktop or floor)
- Direct at the machine, thus also appealing to series machine
manufacturers
Cables can also be run direct through the VESA connection
and the support arm/supporting foot
Backplane cover will have flat appearance
Industrial character will be emphasized
Within the scope of customized projects additional housings
and thus the option of attaching additional operator elements
such as:
Pushbuttons
Switches
Lamps
Emergency-stop facilities
3/61
Siemens AG 2009
Industrial PC
Backplane cover
Ordering data
Backplane covers in die-cast aluminum housing
Backplane cover
Order No.
A
6AV7 672-4GD00-0AA0
Dimensions
Weight of
(W x H x D in mm) backplane cover
(in kg)
Delivery time
Backplane cover PC 477B

15" Touch/12" Key
483 x 310 x 122
Approx. 5.5
CA product agreement
PC 477B 15" Touch with

backplane cover
483 x 310 x 133
Approx.14
PC 477B 12" Key with

backplane cover
483 x 310 x 133
Approx. 13
Backplane cover MP377

19"/Flat Panel
19" Touch/Monitor
483 x 400 x
approx. 120
Approx. 4.5
Flat Panel 19" Touch with

backplane cover
483 x 400 x 130
Approx. 15
More information is available in the Internet at
Additive housing
suitable for all cover models
90 x 309 x 89
Approx. 1.3
3/62
Minimum quantity
Repairs and spare parts

More information
Contacts
Please contact your local/national Siemens HMI representative.
Siemens AG 2009
Industrial PC
Mobile Panel PC 12" IWLAN
Overview
The Mobile Panel PC 12" IWLAN is a useful extension of the

mobile devices in the direction of the open operator station. It is
based on Windows XP and offers by reason of its flexibility and
outstanding performance the most diverse application options.
3/63
Siemens AG 2009
Industrial PC
Benefits
Design
With the operating system Windows XP, the high-performance

1.06 GHz Meron Dual Core processor and the 120 GB hard disk,
the best conditions for high-performance logistics, visualization
and automation tasks are created.
The device communicates in mobile applications per WLAN or
Class 2.0 Bluetooth and is therefore, for example, optimally
equipped for service applications.
Application
Wireless connection to:
Bluetooth
- Mouse and keyboard
WLAN
- Connection to the local access point
- Company network/Internet
- PROFINET
High performance
12.1 TFT display
Touch screen
Intel Dual Core processor 1.06 GHz (Merom)
Main memory: 1 or 2 GB RAM
HDD 120 GB.
Easy to handle
Dimensions (W x H x D) mm: approximately 330 x 240 x 55
Weight: approx. 2.4 kg
Ergonomic handling.
Durable
ACCU operation (4h continuous duty)
Easy contact
LAN 10/100
WLAN (IEE 802.11 a/b/g/n draft)
Bluetooth 2.0
USB 2.0
Line In / Out
Operating system: Windows XP
4 hardware keys (programmable)
Express-Card Slot (35 mm).
The device can be used in different areas of application:

Logistics, transport, airports
Healthcare, outpatient clinic
Fire department, service, sentry, police
Production, manufacturing.
Rugged
Fanless
Operating temperature: 0 C to 40 C
Degree of protection: IP54
Rugged: Height of fall 0.9 m
Magnesium die-cast housing.
&HQWUDO0DQDJHPHQW
PC
Hipath Wireless Controller

Industrial Ethernet
Access Point
SCALANCE
W786-2HPW
Access Point
SCALANCE
W786-2HPW
Access Point
SCALANCE
W786-2HPW
Access Point
SCALANCE
W786-2HPW
SIMATIC Mobile Panel PC 12 IWLAN
$SSOLFDWLRQDUHDV
Logistics
e.g. commissioning
3/64
Information
e.g. merchandise in/output
Maintenance
e.g. mobile maintenance terminal
Visualization
e.g. mobile system visualization
G_ST80_XX_00361
The following important points should additionally be mentioned:

The device is easy to handle and has a low weight. The device
has compact dimensions despite the large display. Whether
youre talking maintenance of machines or large plants, order
picking in the logistics area, or plant visualization, the SIMATIC
Mobile Panel PC 12" IWLAN can meet your demands.
The absolutely rugged construction is especially designed for

industrial applications. With the degree of protection IP54 all
around and an extremely shockproof and ergonomic housing
made of die-cast magnesium, even falls from up to 0.9 m cannot
harm the Mobile Panel PC.
Siemens AG 2009
Industrial PC
Ordering data
Order No.
Order No.
Z
BASIC WLAN Europe (MOW 2)
6AV7 460-3AA00-0AA0
SCALANCE W-784
Access Points

TOP WLAN Europe (MOW 2)
6AV7 460-3AA01-0AA0
IWLAN access points with built-in

wireless interfaces; wireless
networks IEEE 802.11b/g/a/h at
2.4/5 GHz to 54 Mbit/s. National
approvals; WPA2/AES; Power
over Ethernet (PoE), degree of
protection IP30 (-20 +60 C);
scope of delivery: Mounting
hardware, 24 V DC terminal
block; manual on CD-ROM;
German/English
Delivery time
In stock - LZN
Minimum quantity
CA product agreement
10 or more units p. a.

Docking Station for Mobile
Panel PC 12" IWLAN
(BASIC + TOP)
Identified repairs
Z
6AV7 673-0GC00-0AA0
Delivery time
In stock - LZN
Minimum quantity
Identified repairs
SCALANCE W-786
Access Points
German/English;
SCALANCE W-786
Access Points
IWLAN Access Points with built-in

wireless interface RJ45
connection
Two internal antennas
National approvals for operation X
outside the U.S.A.
National approvals for operation X
within the U.S.A.
6GK5 786-1BA60-2AA0
3
6GK5 786-...
(see Catalog IK PI)

German/English;
SCALANCE W-788
Access Points
SCALANCE W786-1PRO
PS791-2DC power supply
6GK5 784-1AA30-...
(see Catalog IK PI)
6GK5 788-...
(see Catalog IK PI)

wireless interfaces; wireless networks IEEE 802.11b/g/a/h at 2.4/5
GHz to 54 Mbit/s. National
protection IP65 (-20 +60C);
scope of delivery: 2 ANT795-4MR
antennas, IP67 hybrid plug-in
connector, mounting hardware,
manual on CD-ROM, German/English
6GK5 786-1BA60-2AB0
6GK5 791-2DC00-0AA0
6GK5 791-2AC00-0AA0
24 V DC power supply for installation in SCALANCE W-786

products; operating instructions
in German/English
PS791-2AC power supply
110 230 V AC power supply for
installation in SCALANCE
W-786 products; operating
instructions in German/English
X) Subject to export regulations: AL: 5A002A1A2 and ECCN: 5A002ENC3
Customer-specific modifications
Customer-specific color specification:
Customer-specific logo on the housing
Color customization of the entire mobile set
(including rubber buffer)
Color customization of the docking station.
More information
Contacts
Please contact your local/national Siemens HMI representative.
More information is available in the Internet at:
3/65
Siemens AG 2009
Industrial PC
RMOS3 V3.50 real-time operating system
Overview
Benefits
More performance through Symmetric Multicore Processing
(SMP)
Through the support of Core 2 Duo processors, complex applications can be processed simultaneously on multiple cores
of the processor
The symmetric utilization of multiple cores through RMOS3
ensures a performance increase of up to 100% (combining
SIMATIC PC with Core 2 Duo processors)
The implementation of existing applications can be limited to
one core if required: Effects such as deadlocks or CPU hopping can thus be avoided without changing the tried-andtrusted application
RMOS3 is the real-time and multitasking-capable operating system from Siemens for implementing your automation solution
with the programming languages C and C++. In mechanical engineering or in the manufacture of machine tools RMOS3 is used
in test beds, packaging or printing machines where high response times in conjunction with open and closed-loop control
tasks are required.
The new RMOS3 real-time operating system is characterized by
increased security thanks to memory protection, minimum interrupt response times and fast hard disk access.
With the new RMOS3 V3.50 version, Core 2 Duo processors are
now also supported. The "Symmetric Multicore Processing"
(SMP) mode makes it possible to implement complex applications that are simultaneously processed on multiple processor
cores. RMOS3 V3.50 ensures that the cores are symmetrically
utilized so that a performance increase of up to 100% can be
achieved on the SIMATIC PC with Core 2 Duo processors.
For SIMATIC PC, automation solutions based on C/C++ with demands for hard real time, deterministic response and high performance can now be created more easily, conveniently and with
greater stability.
RMOS3 has been optimized for use on PC platforms in embedded systems and fulfills industrial requirements with respect to:
Real-time and multitasking capability
Deterministic features
Ruggedness
Scalability/memory requirements
Operation with or without an operator
Modern development tools
Quality assurance
Warranty conditions
Service & Support
3/66
Reliable execution of the programs ensures high availability

of the system
Memory protection for programs in FLAT memory module
(GNU) through MMU (Memory Management Unit) for even
greater reliability of execution for the user applications generated from RMOS3-GNU V2.1 using the development tools.
Privilege level mechanisms for protection of the operating system code, operating system data and the operating system
stacks from unauthorized access from user programs ensure
reliable execution of the operating system
Protected code areas for all applications implemented with
paging mechanisms prevent unintentional, mutual overwriting
of the program code, make program errors easier to find and
reduce the time spent troubleshooting
Stack overflow /underflow monitoring detects encroachment
beyond the valid stack area for the application. Invalid memory accesses are prevented.
Null-pointer detection prevents the use of uninitialized pointer
variables
Compatibility with existing programs (CAD-UL, GNU) thanks
to starting in kernel mode
Greater industrial compatibility thanks to high-speed data
access on a rugged system
Resistant to viruses, due to the closed system
UDMA hard disk driver for rapid back-up of large data
volumes
Support of High Precision Event Timers (HPET) for long-term
accurate time output for logging time events
Support for APIC interrupt controllers with up to 24 high-performance interrupts for optimized utilization of the interrupt
resources and improved real-time properties of the overall
system
Task cycle times starting with 10 microseconds permit the
fastest control cycles on a task level
Support for interrupt sharing on the PCI bus for the use of PCI
modules
Quick and easy start-up enhances user friendliness and
serviceability
Expanded configurable nucleus for the shortest start-up times
on SIMATIC PC
- Configuration over RMOS.INI is 100% compatible to RMOS3
V3.40
- Configurable, up to 2 GB RAM disk for backing up temporary
data
- Configurable APIC, UDMA and HPET support
Output of additional messages in case of error permit a "post
mortem" analysis at the developer's workstation without hindering production.
100% downward compatible operation system versions
Revised integral RMOS3 debugger and resource reporter for
enhanced evaluation of equipment units
Siemens AG 2009
Industrial PC
Application
Industrial automation with typical applications such as
measurement and control technology,
acquiring and processing data, signals or analog variables,
positioning axes and calculating setpoint and actual values,
and communicating with higher or lower level systems over
widely distributed fieldbuses (TCP/IP, PROFINET IO,
PROFIBUS DP, CAN),
requires that a process can respond to an event within a defined
time, i.e. that the response to such an event can be accurately
predicted and reproduced regardless of the current system
load.
RMOS3 offers a comprehensive library of operating system calls
and allows simple and fast implementation of your automation
task in an object-oriented programming environment with the
programming languages C and C++.
Design
RMOS3 impresses customers with its industrial compatibility as
an embedded operating system for maximum response times in
closed-loop and open-loop control tasks and is the basis for
high-performance customer solutions with SIMATIC PC.
Due to the new features in version V3.50, such as support of
"Symmetric Multicore Processing" on Core 2 Duo processors
and long-term accurate time with the help of the HPET, its
ruggedness, industrial compatibility and performance have
been further enhanced. Memory protection for applications in
the FLAT (GNU) memory module, APIC support for high-performance interrupt mode as well as UDMA support for faster access to mass memories are additional core elements of RMOS3.
In combination with the widely used GNU development tools and
the Eclipse development environment, the development of
C/C++ based automation solutions is even more efficient.
The configurable nucleus that has been available since RMOS3
V3.50 is already preconfigured and can be installed immediately
and completely adapted to the hardware and software requirements of your target system via an initialization file. The configurable nucleus supports the PCs from the SIMATIC PC. The
product range is perfectly aligned with the existing additional
functions and hardware features.
With optional products and Board Support Packages (BSP) you
can integrate additional functions and drivers into your application. The Board Support Package BSP-SIMATIC PC V2.1 is the
complete package for operating the following SIMATIC PCs with
RMOS3 V3.40:
Microbox PC 420 and Microbox PC 427B
Box PC 627 and Box PC 627B
Box PC 840 V2 and Box PC 827B
Rack PC 840 V2 and Rack PC 847B
The additional RMOS3-GNU software package is available for
development and for testing applications for RMOS3. The new
development platform is based on the GNU tool chain wellknown and widely used in UNIX / Linux environments and contains all expansions necessary for developing RMOS3 applications. With the Eclipse development interface and the integrated
graphical cross debugger creating applications for RMOS3 is
now even easier than before.
The software package RMOS3-TCP/IP V2.3 provides libraries for
a simple and quick creation of TCP/IP-, FTP- and web applications. Furthermore, the software package offers FTP- and Telnetservices for exchanging files and for remote maintanance of the
RMOS3 system.
The RMOS3-GRAPHX V1.0 graphics package offers an extensive function library for window-oriented visualization solutions in
a real-time and multi-tasking environment of RMOS3. It can
easily and comfortably arrange control and display elements
as generally known under Windows / Linux to an individual
user interface.
3/67
Siemens AG 2009
Industrial PC
Design (continued)
Overview operating system structure RMOS3
runtime environment
BSP - Board Support Packages
API - Application Programming Interface
RMOS3-GNU
* can be ordered from Trolltech ASA
optional products, BSP
RMOS3 V3.50
RMOS3 runtime environment
configuration
communication
GNU Debug Server
diagnosis
debug
programming
interface
GraphX
CANopen
Profile
CLI
File manager
Reporter
Debugger
Exception manager
RAM
File System
DOS
File System
USB
file management
system driver
OPC PMC
UDMA
APIC
EGA
HPET
PC
RMOS3-API
nucleus
target system
3964R
communication
fieldbuses
FTP client/server
FTP lib
Telnet client/server
TCP UDP lib

PROFINET
TCP IP
Serial
10 100MBit LAN
C C++ API
PROFIBUS DP
GBit LAN
BasicCAN
I O-API
RMOS3 real-time multi-tasking nucleus
SIMATIC PC
G_KT01_EN_00353
Overview of the RMOS3 operating system structure
3/68
Siemens AG 2009
Industrial PC
Ordering data
RMOS3 V3.50 EL
Order No.
B
6AR1 405-0EA00-1AA4
Single license for RMOS3

development environment
incl. a RMOS3 runtime license
RMOS3 V3.50 EL Update
6AR1 405-0EA50-1AA4
6AR1 403-0DA3
6AR1 405-0BA00-1BA1
Simple RMOS3 V3.50

runtime license
RMOS3-GNU V2.1 EL
Single license for the GNU
development tools incl. compiler,
linker, debugger and Eclipse IDE,
special RMOS3 libraries for creating applications, project examples and documentation
RMOS3-TCP/IP V2.3 EL
6AR1 403-1AN3
Simple runtime license for

RMOS3-TCP/IP V2.0 and higher
(necessary for user programs
with socket interface)
BSP-SIMATIC PC V2.1 EL
for RMOS3
Update from V3.40 to V3.50.

Single license for RMOS3
development environment
incl. a RMOS3 runtime license
RMOS3 V3.50 RT
Order No.
RMOS3-TCP/IP V2.x RT
6AR1 403-0AN00-1AA3
RMOS3-TCP/IP V2.3 EL Update B
6AR1 403-0AN50-1AA3
Single license for TCP/IP

communication
Application development
with socket interface
Programming interface for FTP
Update from V2.1 to V2.3. Single
license for TCP/IP communication
Application development
with socket interface
Programming interface for FTP
6AR1 403-0BC00-1BA1
Board Support Package for

SIMATIC Microbox PC 420/427B,
SIMATIC Box PC 627/627B,
SIMATIC Box PC 840 V2/827B
SIMATIC Rack PC 840 V2/847B
RMOS3 V3.50 Runtime license not
included.
BSP-SIMATIC PC V2.1 EL
Update V2.0 to 2.1
6AR1403-0BC50-1BA1
BSP-SIMATIC PC V2.x RT
6AR1403-0BC3
Runtime license for Board Support

Package for
SIMATIC Microbox PC 420/427B;
SIMATIC Box PC 627/627B,
SIMATIC Box PC 840 V2/827B
SIMATIC Rack PC 840 V2/847B
RMOS3 V3.50 Runtime license not
included
RMOS3-GRAPHX V1.0 EL
Z
Master license for graphics library
for creation of window-oriented
interfaces of RMOS3 Version 3.30
and higher
Qt Desktop Light Edition,
Single Platform Windows
development pack
Qt Desktop Light Edition V4.1.4
for Windows, incl. Qt designer
RMOS3 -GRAPHX V1.0 RT
Runtime license for grafical
surfaces with RMOS3
6AR1 403-0BG00-1AA0
obtainable from
Trolltech ASA,
www.trolltech.com
6AR1 403-0BG3

3/69
Siemens AG 2009
Industrial PC
Introduction
Overview
This includes:
High temperature operating range up to 55 C
High vibratory/shock load
Rugged housing design
Special degrees of protection up to IP65, NEMA 4
High electromagnetic compatibility (EMC)
UL and CE mark for industrial application
Integrated industrial power supplies (NAMUR)
Service-friendly device mounting for fast change of defective
components
Increased system availability you can count on it!
The SIMATIC PC offers the user a wide range of types of construction and systems, which perfectly match the industrial
applications and fulfill the high requirements concerning the
ruggedness.
We offer you a graded concept for an effective early detection of

potential failures and for minimizing actual downtimes.
It consists of special hardware and software expansion options
developed for SIMATIC PC, with which you can individually increase the system availability according to your safety requirements. Its use is economical, as you gain more safety with components such as the DiagMonitor for permanent self-diagnostics
or with a second hard disk for additional data back-up.These
system availability options contribute to a considerable minimization of the plant's total costs (TCO) and is therefore economical and effective!
Benefits
Permanent high system availability by avoiding potential
failures
Permanent high system availability by minimizing

downtimes
Uninterruptible power supplies (UPS)
Second hard disk makes your system run
Our rugged industrial PC power supplies are designed for voltage drops of up to 20 ms (NAMUR). For longer power failures we
offer you uninterruptible power supplies (UPS), which maintain
the supply longer, e.g. to allow the system to be shut down in a
controlled manner.
The use of hard disks is often essential for memory intense

applications. By using a second hard disk the user enjoys the
following advantages:
Easy and fast data back-up
A fast reload of the last stored image shortens the downtime.
By booting the back-up disk the system can immediately be
driven on after a hard disk error.
Flash disk as a safe mass storage medium

The system availability is further increased by using Compact
Flash Drives instead of hard disks. These rugged mass storage
media are approved for higher values of vibrations, shocks or
temperature and offer an availability ten times higher than with
hard disks. Flash disks therefore offer a safe protection for your
operating system and your application.
RAID1 mirror disk system
The RAID1 configuration automatically saves all data at the
same time on two hard disks. This is comfortable and offers you
highest data safety.
Diagnostics and message functions with the SIMATIC PC
DiagMonitor
The monitoring and message software SIMATIC PC DiagMonitor
detects possible hard- and software errors at an early stage.
Operating data of SIMATIC PC, such as temperature and fan
speed, can be recorded over definable periods of time, complemented by integrated protocol functions as well as text messages and can be evaluated clearly in graphics. Extensive system conditons like watchdog, operating temperature, fan speed
or hard disk conditions are automatically send via Ethernet,
e-mail or SMS (phone) on demand. You can integrate and process this data in automation applications via OPC. The integrated time synchronization allows an operation of the industrial
PCs without CMOS battery.This additionally reduces maintenance costs.
3/70
Preventative data back-up

You can easily minimize downtimes and reduce your ongoing
costs by preventative data back-up.
The SIMATIC PC/PG ImageCreator can save complete hard
disk contents of a PC and can restore them bit by bit in case of
data loss.The A&D-Data-Management-Software (ADDM) executes automatic back-ups in highly-complex networked systems. With this software you can create complete versions, archive and reload your machine data at any time. The SIMATIC
PC/PG Partition Creator serves for comfortable hard disk portioning with changes or initiation and for creating bootable emergency diskettes.
You can also work on duplicate and archive BIOS data effectively thanks to our SIMATIC PC BIOS-Manager. Proven PC configuration can easily be transferred to other PCs. The advantages of the BIOS-Manager are:
Working on, duplication and restoration on site of BIOS data
(CMOS data)
No more time consuming reinstalling
Easy transfer of proven software sizes to other PCs
Fast complete change of device in the service case
Siemens AG 2009
Industrial PC
Introduction
Integration
Individually upgradable system availability by means of optional expansion components
Increase of system availability

Avoiding potential failures
Minimizing downtimes
USV
Partition Creator
Image Creator
Flash Disk
Second hard disk
BIOS-Manager
DiagMonitor
A&D-Data-Management
G_STPC_XX_10
RAID1
Rugged design with high industrial functionality
Product
SIMATIC PC SIMATIC PC
DiagMonitor BIOSManager
SIMATIC PC
Image
Creator
SIMATIC PC
Image &
Partition
Creator
Second
hard disk
RAID1
mirror disk
SIMATIC PC
Compact
Flash
1)
1)
1)
1) 2)
1) 2)
1) 2)
1)
1)
1) 2)
1) 2)
1) 3)
1)
4)
1)
1) 2)
ADDM
Data
Management
SIMATIC PCs
SIMATIC
Microbox PC 427B
SIMATIC Box PC 627B
SIMATIC Box PC 827B
embedded
1)
2)
3)
4)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
Can be ordered using configurator

RAID controller onboard
As alternative to hard disk
Only available with CompactFlash
3/71
Siemens AG 2009
Industrial PC
Overview
Function
The SIMATIC PC DiagMonitor monitors, signals and communicates with an external server, acts in the event of an alarm and
logs the system states of the SIMATIC PCs.
It monitors
The processor and internal device temperatures
Fans
The system status by means of a "watchdog"
The function of the hard disk or RAID1 through the S.M.A.R.T.diagnostic bytes
The future diagnosis-capable generation of the SIMATIC PC
CompactFlash card
SIMATIC PC DiagMonitor: Intelligent and comprehensive diagnostics for SIMATIC PCs local and remote.
The SIMATIC PC DiagMonitor software for monitoring and remote signaling detects possible hardware and software faults at
an early stage. It monitors, signals and visualizes the operating
statuses of the SIMATIC PC both locally and remotely.
DiagMonitor V4.0 is used with the following SIMATIC PCs:
Microbox PC 427B
Box PC 627B / 827B
Rack PC IL 43 / 547B / 847B
Panel PC 477B / 577B / 677B
The software can be ordered as individual product from stock
(e. g. for server application on a third-party PC or for immediate
integration into new systems) or as option according to the
SIMATIC PC configurator (internet, mall) for future device generations.
(DiagMonitor V3.1 is used with SIMATIC Microbox PC 420/427B,
Box PC 627/627B, Rack PC IL 43/840/847B, Panel PC
477/477B/677/677B/877 and can be ordered directly via the PC
configurator or as individual product.)
Benefits
Investment security thanks to increased system availability
Diagnostics and signaling functions for PC temperature, fan,
hard disks (SMART), watchdog
Operating hours counter for preventive maintenance
Integral log function, comprehensive text messages, online
help English/German
Worldwide diagnostics over the Internet thanks to integrated
web server function
Reduced costs thanks to reduced downtimes
Fast information thanks to communication via e-mail and SMS
Fast response thanks to communication in the application
through OPC (client) and SNMP
It signals
The number of operating hours for activating maintenance
periods
Each alarm and logs it
Overshoot/undershoot of permissible operating temperature
Program interruption following a watchdog timeout
Hard disk problems
It communicates
Locally with an OPC client
Locally via DLL or SNMP with a central server
Remotely over LAN, by e-mail, text messages
With diagnostic LEDs and 7 segment displays on the device
Worldwide over the Internet through a web server
It acts in the event of an alarm
By starting customer applications
Through predefined applications (e. g. restart)
It logs
All messages and commands in a log file automatically
The measuring data (temperature, fan) over the operating
period
It visualizes
The recorded measuring data (with trend analysis)
It synchronizes
System time over LAN (e.g. maintenance-free operation
without CMOS battery)
Furthermore, customers have the option of creating their own
applications via a programming interface.
When buying the SIMATIC PC DiagMonitor the user gets the
SIMATIC PC web card free of charge as a useful supplement.
The web card is part of the diagnosis software and gives own
information on the SIMATIC PC via web server. It displays: device data, e. g. product designation, BIOS version, mainboard
number, system status
System requirements:
Executes under Windows 2000/XP Professional/XP embedded,
Win 2003 Server, Win Server 2003 R2, Windows Vista
Ultimate/Business.
Ordering data
SIMATIC PC DiagMonitor V4.0
Software tool for monitoring the
SIMATIC PC, incl. manual on
CD ROM (English, German),
single license
3/72
Order No.
6ES7 648-6CA04-0YX0
Siemens AG 2009
Industrial PC
SIMATIC PC BIOS Manager
Overview
Benefits
Productivity increase due to efficient and user-friendly BIOS
data management
CMOS data duplicated by means of reading out, saving in a
file, writing to the CMOS
CMOS data saved for documentation and restore purposes
DMI data read out and saved as a text file (e.g. PC serial
number)
Application
The SIMATIC PC BIOS Manager is a software tool that is used to

process CMOS and DMI data from the BIOS configuration of a
SIMATIC PC.
The tool is obtained by downloading it from the Internet using the
Automation Value Card from Customer Support
http://www.siemens.com/simatic/bios-manager
Wherever the SIMATIC PC is put to industrial use, it is expanded

by both modules and software and the BIOS settings (CMOS
data) modified accordingly. In this environment, the SIMATIC PC
BIOS Manager is used as:
Production tool
- For quick configuration of identical CMOS data
- Reading CMOS data from the BIOS
- Saving CMOS data in a file tagged with a user text
- Writing the saved CMOS data into BIOS
Service/quality tool
- Quick, simple storage of PC system data for QM purposes
- CMOS data transferred to an end user
- Uncomplicated CMOS restoration on site
Function
The SIMATIC PC BIOS Manager offers the following functions:
reading CMOS data from the BIOS
saving CMOS data in a file tagged with a user text
writing the saved CMOS data into BIOS
scanning BIOS DMI data
saving BIOS DMI data in a text file (basic format for printer
output)
switching language (German/English)
help function
The SIMATIC PC BIOS Manager executes with all SIMATIC PCs
in combination with MSDOS 6.x or FreeDOS.
DOS (FreeDOS), which is necessary for creating a bootable
diskette, is included in the download.
Ordering data
Order No.
SIMATIC PC BIOS-Manager
Software tool for processing special BIOS data (CMOS, DMI data)
for SIMATIC PCs
as download from
Customer Support
http://www.siemens.com/
simatic/bios-manager
The Automation
Value
Card will
be debited with
50 points
3/73
Siemens AG 2009
Industrial PC
Overview
Benefits
Data security at low cost
Hard disk contents can be saved quickly accurate to a bit and
securely.
Reduced costs thanks to reduced downtimes
A significantly shorter time is required to restore a hard disk installation than is required for a new installation.
After a hard disk is replaced, SIMATIC PCs are ready for operation again in just a few minutes.
Software failures due to application errors, operator errors or
computer viruses can be rectified in a matter of minutes.
The most recently backed up hard disk contents are restored
quickly, reliably and accurate to a single bit.
Application
SIMATIC PC Image Creator is used for preventive data backup
of hard disk contents.
SIMATIC PC Image Creator is the software tool for quick and
easy back-up and restoring of the content of hard disks (images
of individual partitions or complete hard disks). This software
can be ordered via the SIMATIC PC configurator or as an individual product via order number.
The product is designed for extremely easy handling:
Executable on all SIMATIC PCs
Operating system-dependent application by starting from
own execution environment
Direct starting by booting the CD, no installation required.
Menu-driven creation of a bootable USB FlashDrive as an alternative start medium
Menu-driven expansion of a USB FlashDrive with Partition
Creator (and BIOS manager, if applicable) to "Tools Stick" with
Image & Partition Creator (& BIOS manager)
"1ClickImage" for routine backups, also time-controlled
3/74
Siemens AG 2009
Industrial PC
Function
Basic functionality
High-speed and accurate backup and restoring of hard disk
contents. This restoration requires considerably less time
compared to a reinstallation.
Consistently integrated menus allow easy operation so that
the user does not require specialist knowledge.
SIMATIC PC Image Creator backs up the hard disk image optionally on :
- Second partition
- Second hard disk
- CD/DVD burner drive
- USB-CD/DVD burner drive or USB hard drive
- A server or directly connected PC
Image Creator can be started directly from the CD, with its full
scope of functions, without the need for installation (exception:
"1ClickImage" backup). In this case there is no change to the
target system to be backed up, which rules out from the start
the possibility of unwanted conflicts with the existing installation.
Can be used on all SIMATIC PCs, regardless of the processor,
memory or hard drive equipment
SIMATIC PCs are supported automatically by integration of
the correct drivers.
The CD can also be booted from an external USB-CD/DVD
drive (if supported by the device).
If no CD/DVD drive is available, boot diskettes or a bootable
USB flash drive (if supported by the device) can be set up as
alternative execution media.
Image Creator is based on Symantec Norton Ghost 2003.
Special product features
Installation of Image Creator is possible in hidden area on the
hard disk (requirement for "1ClickImage"). This means that Image Creator is always on board (--> no Image Creator CD or
USB Flash Drive required). The following functions are then
possible:
Image Creator can be started in Windows (even if Ghost is
not installed). In this case, Windows is shut down and Image
Creator is booted from the hidden area of the hard disk.
Complete backup via mouse double-click with "1ClickImage"
after one-time setup of backup path.
- This makes for an extremely simple backup procedure
- The behavior of the PC after backup (e.g.: shut down, reboot
Windows) can be determined when configuring the backup.
- Log of backup procedure is maintained in a log file. This
means you can check later whether an unsupervised
backup has been performed correctly.
- Versioning of the "1ClickImage" backups (administration of
up to nine backups). This reliably protects older backup
states from inadvertent overwriting.
Time-controlled backup: The start of a previously configured

complete backup via the Windows Task Planner enables regular, unsupervised backups at any times
Creation of an "Image Creator Stick"
When menu-driven, a USB FlashDrive can be set up as an
execution medium for Image Creator. If BIOS Manager is installed on the USB FlashDrive, it is integrated into the operating menu.
Generation of a "Tool Stick"
Image Creator can be added onto an USB Flash Drive with
BIOS Manager and/or Partition Creator. After booting the USB
Flash Drive, you can then call Image Creator or Partition
Creator or BIOS-Manager from a selection menu.
Menu-driven generation of a Windows boot menu entry for the
USB FlashDrive makes the migration of the booting sequence
in favor of the USB FlashDrive in the BIOS unnecessary.
Can run on a SIMATIC PC with Windows 2000/XP/Vista
Note:
The standard installation of Ghost 2003 is not possible in
Windows Vista. The backup and restoration of Vista systems
from the Image Creator runtime environment is possible, however, without restrictions (also "1ClickImage").
Ordering data
Order No.
SIMATIC PC
Image Creator V2.1
Can be ordered using the

SIMATIC PC Configurator
with SIMATIC Rack PC
547B/847B and SIMATIC
Box PC 627B/827B
SIMATIC PC
Image Creator V 2.1
6ES7 648-6BA02-1YX0
Software tool for preventive data

backup for SIMATIC PCs, incl.
manual on CD ROM (English,
German, French, Spanish, Italian)
3/75
Siemens AG 2009
Industrial PC
Overview
Function
Basic functionality
Partition Creator can be started directly from the CD with its full
scope of functions, without the need for installation on the IPC.
The CD can also be booted from an external USB CD/DVD
drive (if supported by the device)
If no CD/DVD drive is available, boot diskettes or a bootable
USB FlashDrive (if supported by the device) can be set up as
alternative execution media.
Partition Creator is based on Symantec Partition Magic 8.0
SIMATIC PC Partition Creator provides the following functions for

modifying hard disk partitions:
Enlarge or reduce existing system and data partitions without
any loss of data
Set up new partitions or delete existing ones
Simple setup of multiple-boot systems. Installation of a boot
manager
SIMATIC PC Partition Creator is a software tool which enables
easy post modification of hard disk partitions without loss of
data.
The product is designed for extremely easy handling:
Executable on all SIMATIC PCs
Direct starting by booting the CD, no installation required
Menu-driven creation of a bootable USB FlashDrive as an alternative start medium for the Partition Creator.
Menu-driven expansion of a USB FlashDrive with Image Creator (and BIOS manager, if applicable) to the Tools Stick with
Image & Partition Creator (& BIOS manager)
Operating system-independent application by starting from
own execution environment.
Special product features

Creation of a Partition Creator Stick
When menu-driven, a USB FlashDrive can be set up as an execution medium for Partition Creator. If BIOS Manager is installed on the USB FlashDrive, it is integrated into the operating menu.
Creation of a Tools Stick
Partition Creator can be added onto a USB FlashDrive with
BIOS Manager and/or Image Creator. After booting the USB
FlashDrive, you can then call Image Creator or Partition
Creator or BIOS-Manager from a selection menu.
Menu-driven generation of a Windows boot menu entry for the
USB FlashDrive makes the migration of the booting sequence
in favor of the USB FlashDrive in the BIOS unnecessary..
Benefits
Can run on a SIMATIC PC with Windows 2000/XP
Hard disk partitions can be modified without the need for

reinstallation
SIMATIC PC Partition Creator facilitates modification of hard disk
partitions to suit changed requirements without the need for reinstallation. The existing installation remains executable.
Appliaction
SIMATIC PC Partition Creator is used for modifying the pre-set
hard disk partitioning to suit new requirements.
Notes:
The SIMATIC PC Partition Creator cannot be used on systems
with Windows Server operating systems!
The SIMATIC PC Partition Creator cannot be used on systems
with Windows Vista operating systems!
Ordering data
SIMATIC PC
Partition Creator V2.1
Software tools for hard disk
incl. manual on CD-ROM
(German, English, French, Italian
and Spanish)
3/76
6ES7 648-6AA02-1YX0
Siemens AG 2009
Industrial PC
ADDM - Data Management
Overview
Function (continued)
Totally Integrated Automation (TIA)
ADDM has a unique way of managing your data uniformly in
production.
Optimum availability
Reliable backup of all system and configuring data, including
documentation and circuit diagrams, can be carried out manually or automatically with time control for made-to-measure
distributed control concepts.
With ADDM, you are completely in control of the SIMATIC and

SINUMERIK controls around the clock and with any program
version. This tool is indispensable in a modern production area
and ensures user-friendly backup, comparison and management of control data.
Benefits
Absolute clarity in data management
With ADDM, everything executes on a uniform user interface
all types and formats of CNC, PLC and configuration data right
through to system software. The tool offers you unambiguous
access authorizations and intuitive handling. The directory
structure is always in line with the physical production layout,
even complex systems can be understood at a glance.
Secure and flexible management of distributed control
concepts
ADDM can be flexibly used for every client/server and online
storage system as well as for stand-alone machines. This
means: Central data storage with maximum fault tolerance
and availability as well as efficient archiving of all machine
data. Thus: Fast feedback of the required version, if required.
Checked, controlled, and documented archiving when several persons are working in parallel.
Minimize downtimes
You can rely on ADDM every time. Even when control components have to be replaced, for example. ADDM makes all the
data available again immediately. With one click, without timeconsuming reparameterization and configuration, whether for
individual programs or complete hard disk partitions, you will
have the right data in the right place.
Function
Controls fully mastered - across all program versions
Backup can be time-driven, fully-automatic or manual. The data
are available at all times and can be used for fast, simple disaster recovery in the event of a fault.
System-active checking
If, for example, data changes become obvious in an onlineoffline comparison, automatic backup can take place and/or
the change can be notified by e-mail.
Hot version backups
The required version can be called up immediately from up to 99
backups (regardless of archive versions).
Total transparency and overview
The practice-oriented structure is ideal not only for highly-complex control systems but also for non-networked single machines with a uniform user interface for all data types and
formats. Checked, controlled and documented archiving when
several persons are working in parallel.
Easy to handle
No programming knowledge required so no need for special
training courses. With the use of communication modules, data
can also be exchanged conveniently with controls via the
MPI/PROFIBUS interface on TCP/IP.
Contiguous archiving
The machine data are fully versioned and archived and can be
copied back at any time. This also includes the documentation.
Operator-free data backup using the ADDM Agent
Data backup of SINUMERIK controls can be time-driven or
manual, without installing a user interface, using the ADDM
Agent. The backup, load and compare functions can be performed remotely using the ADDM Client.
Ordering data
Order No.
ADDM software package

Languages: English, German
ADDM Single User
Single license with CD-ROM
of current software version
6BQ3 030-1AA30-3AC0
Trial license with CD-ROM

6BQ3 030-1AA70-3AC0
Single user upgrade
6BQ3030-1AB13-3AC0
Single license
without data carrier
6BQ3 030-1AA20-1AC0

6BQ3 030-1AA10-0AC0
Client upgrade from V5.x to

V6.1 with CD-ROM
6BQ3 030-1AB11-3AC0

6BQ3 030-1AA00-3AC0
Server upgrade from V5.x to

V6.1 with CD-ROM
6BQ3030-1AB10-3AC0
Single license
without data carrier
6BQ3030-1AA00-1AB0

6BQ3030-4AA00-0AC0
Agent upgrade from V1.x to

V1.2 with CD-ROM
6BQ3030-1AB12-3AC0
ADDM Client
ADDM Server
ADDM Agent

More information
http://www.siemens.com/addm
3/77
Siemens AG 2009
Industrial PC
Overview
Benefits
High system availability because no mechanical parts subject
to wear are used
High degree of industrial compatibility because highly resistant to vibration/shock and high temperatures
Minimization of outlay at customer through qualification and
system test by SIMATIC PC
Integrating the CompactFlash diagnosis allows another increase in system availability
Ordering data
Order No.
SIMATIC PC CompactFlash with

diagnosis
Rugged systems are required when using PCs in industrial environments to ensure minimal production standstill times. SIMATIC
PCs are especially designed for this purpose. One possibility for
enhancing the industrial compatibility and system availability of
the SIMATIC PC is to use SIMATIC PC CompactFlash instead of
hard disk drives. These have been system-tested with the respective SIMATIC PC.
SIMATIC PC CompactFlash can be ordered as a hardware option through SIMATIC PC Configurator or as an accessory.
Depending on the application, cards are available with a storage
capacity from 256 MB.
3/78
256 MB
6ES7 648-2BF02-0XC0
512 MB
6ES7 648-2BF01-0XD0
1 GB
6ES7 648-2BF01-0XE0
2 GB
6ES7 648-2BF02-0XF0
4 GB
6ES7648-2BF02-0XG0
8 GB
6ES7648-2BF02-0XH0
Siemens AG 2009
Industrial PC
PC I/O modules
Overview
PC IO components
PC IO is application-specifically assembled from the base module(s), expansion frame and I/O modules. In maximum configuration, up to 8 I/O modules can be connected.
Module
Description
PC IO Base 400
(base module)
The PC IO central I/O expansion is a signal input/output module

for the SIMATIC Microbox PC 427B. The I/O mounted into the PC
facilitates particularly fast and realtime-capable measuring, e. g.
with a response time to a digital or analog input within 100 sec,
for example with pick-and-place machines, robot controls and
filling systems.
This combination offers a powerful control solution to machine,
system and control cabinet manufacturers providing maximum
compactness, high efficiency and flexibility and minimized
costs.
Interfaces for sensor and

counter connections
Number 4
Input signal of sensor RS 422
Counting depth 32 bit
Interfaces for digital inputs
Number 4
Input voltage 24 V DC
Time-constant input filter
0.01 sec
PC IO MOD Digital 010

(digital I/O module 0)
Digital inputs
Number 24
Input voltage 24 V DC
Time-constant input filter
1 msec, 0.1 msec, 0.01 msec
Electrical isolation Yes
Digital outputs
Number 16, organized in 4
output groups
Output voltage 24 V DC
Output current per output group
1 A max.
Switching frequency < 2 kHz
Switching type p-switching
Electrical isolation Yes
PC IO MOD Analog 020

(analog I/O module 0)
Analog inputs
Number 8, single-ended
Voltage ranges 0 5 V /
10 V, 5 V / 10 V
Resolution 12 bit (incl. sign)
Conversion time max. 50-200 s
per channel, depending on
conversion type
PT 100 inputs
Number 4
Type Two-wire measuring
Analog outputs
Number 8, single-ended
Voltage range 10 V
Resolution 16 bit (incl. sign)
Conversion time max.100-200 s
per channel, depending on
conversion type
PC IO KIT 040
(encoder expansion rack)
For expanding a SIMATIC

Microbox PC 420/427B.
Connection unit for:
4 encoder inputs
4 digital inputs
Encoder voltage supply
PC IO KIT 030
(I/O expansion rack)
For expanding a SIMATIC

Microbox PC 420/427B.
Expansion rack to hold
max. 2 I/O modules
in the Microbox PC 42x system
The PC IO is equipped with all drivers for application in

C/C++-based automation solutions with the realtime operating
system RMOS3 as well as applications based on Windows XP
Embedded and XP Professional, e.g. WinAC RTX.
A selection guide with a list of materials for your requirements
can be found under:
http://www.siemens.com/simatic-pc/pc-io-selection
3/79
Siemens AG 2009
Industrial PC
PC I/O modules
Benefits
Ordering data

availability
Monitoring and diagnostic functions (watchdog, heart beat,
short-circuit monitoring, temperature monitoring, broken
cable)
Maintenance-free operation because a fan is not necessary
Service-friendly hardware configuration (easy expansion,
direct plug-in system for easy installation)
High interference immunity (isolated digital I/Os)
High product continuity through long-term secure functionality in
hardware and software
Modules developed and manufactured by Siemens
Guaranteed spare-parts availability of the components (5 years)
High degree of industrial compatibility thanks to rugged construction (solid metal expansion rack, Base 400 permanently
screwed to I/O modules) even under extreme vibration and
shock loading, at high temperatures and with high electromagnetic interference
High degree of flexibility in the selection and expansion of
components (inputs and outputs are scalable in terms of type
and number)
Compact, resource-saving construction (four I/O modules or
up to 160 24 V IOs can be operated on one PCI load)
Support is available for different operating systems, such as
RMOS3, Windows XP Professional, Windows XP embedded
High performance for fast signal processing in real-time applications
Cost minimization through time savings
Fully assembled, turn-key systems
Program examples for support with creating applications
Quick assembly due to integrated terminals with direct plug-in
connection system
3/80
PC IO Base 400
Order No.
A
6ES7 648-2CE20-0AA0
PCI-104 module for connecting

up to 4 PC IO MOD xxx 010/020,
with 4 encoder interfaces and
4 DI incl. fixing accessories (base
module with fixing accessories)
PC IO MOD Digital 010
6ES7 648-2CE40-0AA0
Digital I/O module with 24DI and

16DO, incl. connecting cable to PC
IO Base 400 and mating connector
PC IO MOD Analog 020
6ES7 648-2CE40-0CA0
Analog I/O module with 8AI, 8AO

and 4 PT100, incl. connecting cable
to PC IO Base 400, mating connector and shield clamp
PC IO KIT 030
6ES7 648-1AA20-0XF0
I/O module expansion rack for

Microbox PC 420/427B for installing
up to 2 I/O modules, including fixing
accessories and a cover plate
PC IO KIT 040
6ES7 648-1AA20-0XE0
Encoder expansion rack for

Microbox PC 420/427B for contacting the encoder interfaces and DIs
of the PC IO Base 400, incl. fixing
accessories
Siemens AG 2009
Industrial PC
Panel PC Remote Kit
Overview
Design
The Remote Kit consists of the following components:
Remote module (mounted on the rear of the operator control
unit)
Video connecting cable (industrial grade DVI-D cable)
USB connecting cable (up to 5 m with a standard USB cable;
at 5 m and longer, the USB signal is transmitted via a CAT6
cable with external amplification)
Mechanical components (for mounting the computer unit
inside a control cabinet, console or machine)
Ordering data
The Remote Kit makes it possible to separate the Panel PC

677/677B operator control unit from the computer unit and install
them up to 30 m apart.
Benefits
Maintaining the Panel PC front functionality
- Status LEDs (temperature/power)
- LEDs on the keys, Piezo mouse
- USB 2.0 on front (up to 5 m), USB 1.1 (up to 30 m)
- Dimmable backlit display
- Programmable keyboard controller
- Direct control key module option available and mountable
Makes an ultra-compact operator control unit possible
Suitable for subsequent modification/upgrade by the
customer
Applicable for all SIMATIC Panel PCs 677 and 677B
Pure hardware solution and, therefore, independent of the
operating system
Remote front with the option of AC or DC power supply
Operator control unit can be located up to 30 m away from the
computer unit
Order No.
SIMATIC Panel PC Remote Kit

24V DC, 5 m
A
24V DC, 10 m
A
6AV7 671-1EA00-5AA1
24V DC, 15 m
6AV7 671-1EA01-5AA1
24V DC, 20 m
6AV7 671-1EA02-0AA1
24V DC, 30 m
6AV7 671-1EA03-0AA1
100/240 V AC, 5 m
6AV7 671-1EA10-5AA1
100/240 V AC, 10 m
6AV7 671-1EA11-0AA1
100/240 V AC, 15 m
6AV7 671-1EA11-5AA1
100/240 V AC, 20 m
6AV7 671-1EA12-0AA1
100/240 V AC, 30 m
6AV7 671-1EA13-0AA1
6AV7 671-1EA01-0AA1
Accessories
Power supply cable
Europe: D/F/NL/E/B/A/S/FIN 1)
6ES7 900-1AA00-0XA0
United Kingdom
6ES7 900-1BA00-0XA0
Switzerland
6ES7 900-1CA00-0XA0
USA
6ES7 900-1DA00-0XA0
Italy
6ES7 900-1EA00-0XA0
China
6ES7 900-1FA00-0XA0
Sub-components of the
Remote Kit
(only available individually as
spare parts)
24 V DC remote module
A
with fixing accessories
110 240 V AC remote module
with fixing accessories
USB amplifier/CAT6 converter
5 m cable set
(DVI, USB standard cable)
10 m cable set
(DVI, Cat 6 cable)
15 m cable set
(DVI, Cat 6 cable)
20 m cable set
(DVI, Cat 6 cable)
30 m cable set
(DVI, Cat 6 cable)
6AV7 671-1EX01-0AD0
6AV7 671-1EX01-0BD0
6AV7 671-1EX02-0AB0
6AV7 671-1EX10-5AA0
6AV7 671-1EX11-0AA0
6AV7 671-1EX11-5AA0
6AV7 671-1EX12-0AA0
6AV7 671-1EX13-0AA0

1) A European power supply cable is included in the scope of delivery
of the AC (100 240 V) version of the Remote Kit.
3/81
Siemens AG 2009
Industrial PC
Overview
Design
Use of the Industrial USB Hub 4
permits the simultaneous connection of as many as four
peripheral devices such as USB stick, mouse, keyboard,
printer or barcode reader to the panel.
increases the availability of the system to be operated. The
cabinet door no longer has to be opened in order to connect
to the peripherals. The unit can be operated from the Panel PC
and the Multi Panel without interruption.
In addition, the Industrial USB Hub4 has the following features:
Inspection window for each interface
Vibration-proof restraint of connected USB cables and USB
sticks
One LED per interface for checking the data traffic
Sufficient interior space for easy insertion and removal of
connections
Facility for attachment to a DIN rail
Industrial USB Hub 4, open
The Industrial USB Hub 4 is used as a USB hub for the

connection of peripheral devices to Multi Panels, Panel PCs
and standard PCs.
The industrial USB Hub 4 with IP65 degree of protection on the
front (Service Kit required) can be mounted in a control
cabinet. This simplifies the use of USB peripherals in harsh
industrial environments.
USB peripherals can be connected to the panel and operated
via the Industrial USB Hub 4 without opening the cabinet door.
The ports are also accessible from the rear even in the control
cabinet.
Integration
The Industrial USB Hub 4 is suitable for connection to:
MP 277/ MP 377
SIMATIC Panel PC
Recommended operating systems:
Windows 2000/XP/XP embedded
Ordering data
Service pack for
Order No.
A
6AV6 671-3AH00-0AX0
see HMI Accessories
Service packages
More information
Note for SIMATIC Panel PCs
The Industrial USB Hub 4 is approved for the Windows 2000/XP
operating systems. The appropriate drivers are supplied with the
operating system software.
3/82
Siemens AG 2009
Industrial PC
DC UPS uninterruptible power supplies
Introduction
Overview
For SIMATIC PC this implies a failsafe shut down of all current
applications, as well of the operating system.
For NON-STOP use in the event of power failures, Siemens
offers the following uninterruptible power supplies:
DC UPS 6 A
DC UPS 15 A
DC UPS 40 A
and the following battery modules:
1.2 Ah (contains lead-acid batteries with corrosion-resistant
lead-calcium, high-capacity grid plates and fiberglass mat)
3.2 Ah (contains lead-acid batteries with corrosion-resistant
7 Ah (contains lead-acid batteries with corrosion-resistant
12 Ah (contains lead-acid batteries with corrosion-resistant
2.5 Ah (contains high-temperature battery lead-acid type)
By combining a SITOP power supply unit with a DC UPS module
and with at least one 24 V battery module or a maintenance-free
SITOP UPS500S (optionally with extension module), longer
power failures can be bridged without any interruption.
This combination is used, for example, in machine tool manufacture, the textile industry, all types of production lines and filling
systems, and in conjunction with 24 V industrial PCs. This prevents the negative effects which often result from power failures.
SITOP power supply
The maintanance-free DC UPS modules with capacitors as

energy storage are particularly suitable for operation in high
ambient tamperatures:
SITOP UPS500S (DC UPS basic unit 15 A 2.5 kWs)
SITOP UPS500S (DC UPS basic unit 15 A 5 kWs)
Optionally for increasing the buffer time:
SITOP UPS501S (capacitor module 5 kWs)
Load
DC UPS module with battery module
Messages
- Mains or buffer operation
- Buffer ready or alarm
Charging status >85 % or <85 %
via USB interface or floating relay contacts
SITOP UPS500S basic unit 15 A

with capacitor module as additional energy storage
24 V DC
G_KT01_EN_00357
24 V DC
AC or 3 AC
USB interface for data exchange with

industrial PC
Ordering data
Order No.
Order No.
Examples for SITOP power supplies:
Examples for SITOP power supplies:
SITOP modular 5 A
Input 120/230 500 V AC
Output 24 V / 5 A DC
6EP1 333-3BA00
SITOP smart 5 A
Input 120/230 V AC
6EP1 333-2BA01
SITOP modular 10 A
Input 120/230 500 V AC
6EP1 334-3BA00
SITOP smart 10 A
Input 120/230 V AC
6EP1 334-2BA01
3/83
Siemens AG 2009
Industrial PC
Introduction
Overview
Selection table for battery modules and line-buffering times
Load current
Battery module 1.2 Ah

(6EP1935-6MC01)

(6EP1935-6MD11)
Battery module 7Ah

(6EP1935-6ME21)
Battery module 12 Ah
(6EP1935-6MF01)

(6EP1935-6MD31)
1A
30 min
2.5 h
6h
11 h
2h
2A
11 min
45 min
2.5 h
5h
45 min
3A
4 min
25 min
1.5 h
3h
30 min
4A
2 min
20 min
45 min
2h
20 min
6A
1 min
10 min
30 min
1h
13 min
8A
4 min
20 min
40 min
9 min
10 A
1.5 min
15 min
30 min
7 min
12 A
1 min
10 min
25 min
5.5 min
14 A
50 s
8 min
20 min
4.5 min
16 A
40 s
6 min
15 min
4 min
20 A
2 min
11 min
Important information for selecting the battery capacity:

On determining the mains buffering times the duration of discharge was based on a non-aged and fully charged battery
module with an accumulator temperature of not less than
+25 C up to a dip in the battery voltage to 21 V;
As a result of aging of the accumulators, the available accumulator capacity is reduced throughout the life of the battery
to approx. 50% of the original capacity;
To achieve the longest possible service life of the accumulators, the battery modules should be stored for only very short
periods, always fully charged and in the temperature range
0 to +20 C;
In the case of the DC UPS module 40 A, at least 2 battery
modules with a minimum of 7 Ah must be switched in parallel.
It is important to ensure here that the accumulators are of the
same capacity and age.
For important configuration notes see Catalog KT 10.1.
Selection table SITOP UPS500S (optionally with capacitor module) and line-buffering times
Load current
SITOP UPS500S
(DC UPS basic unit
15 A 2.5 kWs)
SITOP UPS500S
(DC UPS basic unit
15 A 5 kWs)
SITOP UPS500S
(DC UPS basic unit
15 A 2.5 kWs) with SITOP
UPS501S (capacitor
module 5 kWs)
SITOP UPS500S
(DC UPS basic unit
15 A, 5 kWs) with SITOP
UPS501S (capacitor
module 5 kWs)
6EP1935-5PG01
6EP1935-5PG01
6EP1933-2EC41
6EP1933-2EC51
0.2 A
217 s
395 s
0.5 A
134 s
236 s
390 s
478 s
0.8 A
90 s
167 s
266 s
346 s
1A
110 s
205 s
311 s
425 s
2A
54 s
120 s
158 s
223 s
3A
26 s
52 s
82 s
106 s
4A
19 s
39 s
61 s
81 s
5A
15 s
31 s
49 s
65 s
6A
12 s
26 s
40 s
55 s
8A
8s
18 s
29 s
40 s
10 A
6s
15 s
23 s
32 s
12 A
4s
12 s
19 s
26 s
15 A
3s
9s
14 s
20 s
Important information for selecting the energy storage:

The mains buffering times are based on the discharge period of
new or non-aged, fully charged capacitors. In case of enduring
3/84
ambient temperature of + 50 C we must reckon with a loss of

capacity of ca. 20 % after a service life of 8 years.
Siemens AG 2009
Industrial PC
SITOP DC UPS modules 6A/15A/40A
Overview
Overview
Monitoring and configuration windows of the SITOP UPS software
DC UPS module
DC UPS software
DC UPS modules 6A/15A/40A

Compact design, only 50 mm wide (6 A/15 A) and
102 mm (40 A)
Simple DIN rail mounting
Absolutely interruption-free buffering of mains failures through
immediately electronic connection of the batteries as soon as
the DC UPS input voltage drops below the value set using DIP
switches
High safety and availability through monitoring of operational
readiness, battery supply line, battery aging (message
"Battery replacement necessary") and battery charge
(message "Battery charge >85%")
Support of automatic restart of industrial PCs through
selectable switch-off response
Optionally with serial (6 A/15 A only) or USB interface
The DC UPS modules are optionally available with a USB port or

a serial port. All relevant messages about the status of the DC
UPS can be transferred to a PC (e.g. SIMATIC PC) via this interface.
SITOP DC UPS software provides the user with a software tool
that is extremely easy to operate and can be used to further
process the signals sent from the DC-UPS module on the PC. In
monitoring mode, the status of the DC-UPS module is visualized
on the PC. Safe shutdown in the event of a power failure and
automatic PC restart are supported. It is also possible to freely
define responses to the different operating states of the DC UPS
module, permitting extremely flexible integration into a wide
variety of applications. The SITOP DC UPS software can be installed either as application or as service. When using it as application an OPC server interface is available in addition to the
data exchange.
The software executes under the Windows Vista, Windows 2000
and Windows XP operating systems. It is available as freeware
on the SITOP Internet site for free downloading.
www.siemens.com/sitop-ups
Ordering data
Order No.
DC UPS module 6 A
6EP1 931-2DC21
with serial interface
6EP1 931-2DC31
with USB interface
6EP1 931-2DC42
DC UPS module 15 A
6EP1 931-2EC21
with serial interface
6EP1 931-2EC31
with USB interface
6EP1 931-2EC42
DC UPS module 40 A
6EP1 931-2FC21
with USB interface
6EP1 931-2FC42
3/85
Siemens AG 2009
Industrial PC
SITOP battery modules
Overview
Battery module 7 Ah
Battery for DC UPS module 6 A, 15 A and 40 A
Contains two maintenance-free, sealed lead-acid batteries
from the same batch fitted in a holder and connected in series
Completely prewired with battery fuse holder and terminals
Accessory pack with FK2 spare fuses 15 A and 20 A
Low self-discharge rate of approx. 3 % per month (at +20 C)
Recommended charging current: max. 1.75 A
Recommended end-of-charge voltage at 25 C battery temperature: 27.0 V DC
Dimensions (W x H x D): approx. 186 mm x 168 mm x 121 mm
Can be screwed onto flat surface
(Keyhole mounting for hooking onto M4 screws)

Battery module for DC UPS module 6 A
Recommended end-of-charge voltage at 25 C battery
temperature: 27.0 V DC
Dimensions (W x H x D):
approx. 96 mm x 106 mm x 108 mm
Weight: approx. 2 kg
Snap-mounting on 35 mm standard rails
(DIN EN 50022-35x15/7.5) or keyhole mounting
for hooking onto M4 screws
High-temperature battery for DC UPS module 6 A and 15 A
Contains two maintenance-free, sealed chemical lead-acid
batteries from the same batch fitted in a holder and connected
in series
Recommended charging current: max. 5 A
Battery module for DC UPS module 6 A and 15 A
Includes battery fuse holder and terminals
3/86
Battery module 12 Ah
Battery for DC UPS module 6 A, 15 A and 40 A
Accessory pack with FK2 spare fuses 15 A and 20 A
Recommended charging current: max. 3 A
Recommended end-of-charge voltage at 25 C battery temperature: 27.0 V DC
Can be screwed onto flat surface
(Keyhole mounting for hooking onto M4 screws)
Ordering data
SITOP
Battery module 24 V/1.2 Ah
Order No.
A
6EP1 935-6MC01

SITOP
6EP1 935-6MD31

SITOP
6EP1 935-6MD11

SITOP
Battery module 24 V/7 Ah
6EP1 935-6ME21
for DC UPS modules 15 A and

40 A
SITOP
Battery module 24 V/12 Ah
6EP1 935-6MF01
for DC UPS modules 15 A and

40 A
Siemens AG 2009
Industrial PC
AC UPS uninterruptible power supplies
SITOP UPS500S
Overview
Ordering data
Order No.
SITOP UPS500S
Basic unit with 2.5 kWs onboard
6EP1 933-2EC41
Basic unit with 5 kWs onboard
6EP1 933-2EC51
SITOP UPS501S
capacitor module 5 kWs
6EP1 935-5PG01
Basic unit SITOP UPS500S

Compact design, only 120 mm wide
Two versions with integrated energy storage units: 2.5 KW or
5 KW
Can be expanded easily using a user-friendly plug-in system
with the capacitor module (5 KW)
Completely uninterruptible mains buffering through immediate
electronic connection of the integral capacitors as soon as the
DC UPS input voltage falls below the value set by means of
DIP switches
High level of safety and availability through monitoring of operational readiness, and monitoring of the capacitor charge
(message "> 85% charged")
Support for automatic warm restart of industrial PCs through
selectable shutdown characteristics
With USB interface
Can be snapped onto standard mounting rail EN 60715
35X7.5/15
Dimensions (W x H x D) in mm: approx. 120 x 125 x 125
Expansion module SITOP UPS501S
Additional energy storage (5 KW)
Up to 3 capacitor modules can be connected to a SITOP
UPS500S for extending the backup times
Compact design, only 70 mm wide
Can be easily connected to SITOP UPS500S using userfriendly plug-in system
Complete with balancing and safety circuits
Can be snapped onto DIN rail EN 60715 35x7.5/15
Dimensions (W x H x D) in mm: approx. 70 x 125 x 125
3/87
Siemens AG 2009
Industrial PC
AC UPS uninterruptible power supplies
MASTERGUARD
Overview
MASTERGUARD UPS
The MASTERGUARD A-19 and EI-19 offer effective
online protection against all types of network interferences
True online functional principle, i.e. complete decoupling of
load from the irregularities of the power supply
19" compact modules
Simple operation as well as functional display of mode and
load status
MASTERGUARD USV series A-19/EI-19

Permanent dual converter technology corrects any irregularities on the network and provides absolute protection against
interruptions
Easy to configure for 19" cabinets thanks to battery expansions and universal sliding inserts
If space is at a premium, the A-19 series can be supplied with
a mounting height of just 2 HU or the EI-19 series with only
3 HU, load-regulated fans and functional display
A serial interface or USB interface can be selected for communication and the UPS network interface can also be implemented using the SNMP expansion card for the communication slot
Ordering data
Standard configuration
UPS MASTERGUARD A-19 series
UPS MASTERGUARD EI-19 series
A700-19
Output: 700 VA; Integrated battery: 6 min
A1000-19
Output: 1000 VA; Integrated battery: 7 min.
A2000-19
Output: 2000 VA
A3000-19
Output: 3000 VA
EI-19
Output: 6000 VA
MASTERGUARD battery pack A-19 series
ManageUPS SNMP adapter card
BPA 1000-19
for UPS A1000-19 (max. 2 BP)
BPA 3000-19
for UPS A2000-19 (max. 5 BP)
and UPS A3000-19 (max. 5 BP)
MopUPS shutdown software
battery pack MASTERGUARD EI-19 series
BPEI-19
Accessories
Sliding insert 3 HE 330-580 mm
for Intel operating systems (Windows, Linux, Solaris for Intel)

for Risc operating systems (Solaris SPARC, HPUX, AIX)
Accessories
More information
Additional information on MASTERGUARD UPS is available in the Internet under
http://www.masterguard.com
Sales Contact:
Service Contact:
MASTERGUARD GmbH
Mr. Willi Brinkmann
Phone: +49 9131 6300 248
Fax: +49 9131 6300 271
E-Mail: [email protected]
Info-Hotline: +49 180-532 37 51
MASTERGUARD GmbH
Mr. Alexander Zink
Phone: +49 9131 6300 218
Fax: +49 9131 6300 281
Support-Line: +49 180-522 10 96
7
3/88
Siemens AG 2009
Logic Control
4/2
Introduction
4/3
4/3
4/9
SIMATIC PC-based Control

SIMATIC WinAC Software PLC
SIMATIC WinAC ODK
4/10
4/10
4/11
4/13
4/14
4/15
4/16
4/17
4/18
SIMATIC Industrial Software

Application
STEP 7
STEP 7 Professional
S7-SCL
S7-GRAPH
S7-HiGraph
CFC
SIMATIC iMap
4/19
4/19
Programmming devices
Field PG M2
Siemens AG 2009
Logic Control
Introduction
Overview
Application
SIMATIC WinAC is optimized for the following tasks:
Compactness:
for reasons of space and performance, data processing, communication, visualization, technology and control have to be
integrated in one PC.
Openness:
close integration into data processing is required, together
with high performance.
Technology:
specific technological tasks must be implemented in close
cooperation with the control functions.
Flexibility:
the task requires the integration of specific hardware or software modules.
SIMATIC WinAC is equipped for this with open and powerful
interfaces. SIMATIC WinAC is therefore the ideal platform for
tailor-made automation solutions.
4
Siemens has developed a wide range of coordinated hardware
and software components for PC-based Automation.
Focus: SIMATIC PC-based Controllers with SIMATIC WinAC,
the open, flexible and reliable controller for your PC-based automation solution.
The PC can be used to implement all automation tasks such as
open/closed-loop control, operator control and visualization and
motion control on one platform. PC-based Automation is first
choice wherever PC applications have to be implemented in addition to standard PLC tasks.
Adds PC-based control to the SIMATIC S7 controller family
Especially suitable where a variety of tasks such as data
processing, communication, visualization, technology and
control have to be integrated in one PC.
Versions
SIMATIC WinAC Software PLCs
for tasks requiring a high level of flexibility and integration
capability.
SIMATIC WinAC ODK
allows PC solutions for technological tasks to be integrated
flexibly and powerfully into the controller
Properties:
Runs on standard PCs under Windows XP Professional.
Code-compatible with SIMATIC S7:
Programmed with SIMATIC industrial software, created
programs can also be used for SIMATIC S7.
Uses standard interfaces for integration into the office
environment.
Open interfaces for the integration of solution-specific technological hardware and software.
4/2
Additional information is available in the Internet at:

http://www.siemens.com/pc-based-automation
Siemens AG 2009
Logic Control
Overview
SIMATIC WinAC RTX 2008
Firmware Version V4.4
Product status
associated programming package
Memory
RAM
- integrated
PC RAM can be used

(non-paged memory)
Load memory
- integrated RAM, max.
CPU/blocks
DB
Number, max.
New with WinAC RTX 2008:

Option for connecting distributed I/O via PROFINET.
In addition to PROFINET IO, it is also possible to use
PROFINET CBA and Open User Communication (open
communication via TCP and UDP).
Application
SIMATIC WinAC RTX is particularly suited to tasks requiring a
high level of flexibility and effective integration in the overall
solution. This also includes the close connection with data processing or logistic systems, as well as the link to technological
tasks such as motion or vision systems.
SIMATIC WinAC RTX offers hard real-time and high performance. The optimized runtime system supports the processing
of extensive and demanding PC applications in parallel with the
control task.
The high performance of WinAC RTX also enables high-speed
control solutions to be implemented with minimal processor
loading. This means that either cheaper PC platforms can be selected for the same tasks or additional tasks can be processed
using the same PC. WinAC RTX is thus optimized for operation
on embedded PC platforms such as Microbox PC 427 and Panel
PC 477B. The construction of the hard drive and the fanless design allow these platforms to offer a clearly improved robustness
for an automation task. The SIMATIC PC with an integrated, non
volatile memory allows for the storage of up to 128 Kbyte of retentive data in the event of a voltage failure independent of the
file system. The plug-in card WinAC NV128 is available for additional PCs. Support for the integrated PROFIBUS interfaces of
the SIMATIC PCs as well as enhanced performance results in an
excellent price/performance ratio for PC-based automation.
WinAC ODK is used to expand PLC functionality by adding
application-specific C/C++ applications. This allows:
Incorporation of complex high-level language algorithms into
the control program
Access to the Windows API or Windows system resources
Access to external hardware and software components
PC RAM can be used

(non-paged memory)
Limited only by available PC work

memory
64 Kibyte
Size, max.
SIMATIC WINAC RTX:

optimized for applications that demand a high level of
flexibility and integration.
The software solution for tasks that demand hard deterministics and high performance.
With real-time expansion for guaranteeing deterministic behavior for the control component.
STEP7 V5.4 SP4 or higher + HW

update / iMap V3.0 SP1
FB
Number, max.

memory
64 Kibyte
Size, max.
FC
Number, max.

memory
64 Kibyte
Size, max.
OB
Number, max.
Size, max.
Blocks

memory
64 Kibyte
3; OB 52-54
Nesting depth
per priority class
additional within an error OB
24
24
CPU/processing times
for bit operations, min.
for fixed point arithmetic, min.
for floating point arithmetic, min.
Reference platform
0.004 s; typ.
0.003 s; typ.
0.004 s; typ.
Pentium IV, 2.4 GHz
Times/counters and their

remanence
S7 counter
Number
Remanence
- adjustable
- lower limit
- upper limit
- preset
Counting range
- adjustable
- lower limit
- upper limit
IEC counter
present
Type
S7 times
Number
Remanence
- adjustable
- lower limit
- upper limit
- preset
Time range
- lower limit
- upper limit
2048
Yes
0
2047
8
Yes
0
999
Yes
SFB
2048
Yes
0
2047
0
10 ms
9.990 s
4/3
Siemens AG 2009
Logic Control

IEC timer
present
Type
Test commissioning functions

Yes
SFB
Data areas and their remanence

Remanence without UPS and
PS Extension Board
Remanence with UPS

Flag
Number, max.
of which remanent
Remanence preset
Number of clock memories
Address area
I/O address area
Inputs
Outputs
of which, distributed
- DP interface, inputs
- DP interface, outputs
128 KB with SIMATIC Microbox

PC 427B and Panel PC 477B;
other SIMATIC PCs on request
all data
16 Kibyte
MB 0 to MB 16383
MB 0 to MB 15
8
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
Process image
Inputs, adjustable
Outputs, adjustable
Inputs, preset
Outputs, preset
8 Kibyte
8 Kibyte
512 byte
512 byte
Subprocess images
Number of subprocess images, max.
15
Digital channels
Inputs
Outputs
128.000
128.000
Analog channels
Inputs
Outputs
8.000
8.000
Hardware config.
Submodules
Number of submodules, max
of which PROFIBUS, max.
of which, industrial Ethernet, max.
Number of operable FMs and CPs

(recommended)
FM
CP, point-to-point
CP, LAN
4
4; CP 5611, CP 5611-A2, integrated
PB interface of the SIMATIC PC,
CP 5613 CP, 5613-A2, CP 5603
1; PROFINET: CP1616, CP1604,
S7-mEC integrated PN interface
and SIMATIC PC
4; FM distributed: FM 350-1 /
350-2, FM 351, FM 352, FM 353,
FM 355 / 355-2
2; CP 340, CP 341 distributed
Over PC CP
Status/control
Status/control variable
Yes
Forcing
Forcing
No
Status block
Yes
Single step
Yes
Diagnostic buffer
present
Number of entries, max..
present
Yes
3.200
120
Communication functions
PG/OP communication
Yes
Global data communication

supported
No
S7 basic communication
supported
No
S7 communication
supported
as server
as client
Yes
Yes
Yes
Web server
Web server
No
Number of connections
overall
- reserved for PG communication
- reserved for OP communication
64
1
1
PROFINET CBA (at set setpoint

communication load)
Setpoint for the CPU
communication load
20%
Number of remote interconnection

partners
64
Number of functions, master/slave
17
Total of all master/slave connections
1000
Data length of all incoming

connections master/slave, max.
6.800 byte
Data length of all outgoing

connections master/slave, max.
6.800 byte
Number of device-internal and

PROFIBUS interconnections
500
Data length of device-internal and

PROFIBUS interconnections, max.
4.000 byte
Data length per connection, max.
1.400 byte
Remote interconnections with

acyclic transmission
Time
Clock
Hardware clock (real-time clock)
buffered and synchronizable
Yes
Yes
Clock synchronization
supports
to PC-CP, Slave
on Ethernet via NTP
Yes
Yes
Yes
Sampling frequency: sampling

interval, min.
500 ms
Number of incoming
interconnections
100
Number of outgoing
interconnections
100

interconnections, max.
2000 byte
Data length of all outgoing

2000 byte
No
Process diagnostic messages
Yes; Alarm_S
1400 byte
Alarm 8-blocks
Yes
S7 message functions
Number of login stations for message functions, max.
SCAN procedure
62
Instrumentation & control messages No
4/4
Siemens AG 2009
Logic Control

Remote interconnections with
cyclic transmission
Transmission frequency:
transmission interval, min.
10 ms
Number of incoming interconnections
200
Number of outgoing interconnections
200

Address area
- Inputs, max.
- Outputs, max.
16 Kibyte
16 Kibyte
Useful data per DP slave

- Inputs, max.
- Outputs, max.
244 byte
244 byte
2nd interface

4800 byte
Type of interface
4800 byte
Number of simult. operable CPs,

max.
Data length of all outgoing interconnections, max.
Physics
RS 485 / PROFIBUS
250 byte
isolated
Yes
HMI variables via PROFINET

(acyclic)
MPI
No
DP master
Yes
500 ms
DP slave
No
200
PROFINET IO controller
No
2000 byte
PROFINET CBA
No
PROFINET CBA-SRT
No
HMI variable updating

Number of HMI variables
Data length of all HMI variables,
max.
PROFIBUS proxy functionality
DP master
supported
Yes
Number of linked PROFIBUS

devices
16
240 byte; Slave-dependent
1st interface
Type of interface
CP 5611, CP 5611-A2, integrated

PB interface of the SIMATIC PC

max.
Physics
RS 485 / PROFIBUS
isolated
Yes
Functionality
MPI
DP master
DP slave
No
Yes
No
DP master
- Isochronous mode
- SYNC/FREEZE
- Activation/deactivation of DP
slaves
- direct data exchange
(cross traffic)
- DPV0
- DPV1
Transmission speeds, max.
Number of DP slaves, max.
Functionality
Number of log-in stations for HMI

variables (PN OPC/iMap)
Number of connections, max.

Services
- PG/OP communication
- Routing
- Global data communication
- S7 basic communication
- S7 communication
- equidistance support
CP 5613, CP 5613 A2
8
Yes
Yes
No
No
Yes
Yes; only in conjunction with
isochronous mode
Yes
Yes
Yes
Yes
Yes
Yes
12 MBit/s
64

Services
- Routing
- Global data communication
- S7 basic communication
- S7 communication
- equidistance support
- Isochronous mode
- SYNC/FREEZE
- Activation/deactivation of DP
slaves
- direct data exchange
(cross traffic)
- DPV0
- DPV1
50
Yes
Yes
No
No
Yes
Yes; only in conjunction with
isochronous mode
Yes
Yes
Yes
Yes
Yes
Yes
12 MBit/s
Number of DP slaves, max.
125
Address area
- Inputs, max.
- Outputs, max.
16 Kibyte
16 Kibyte
Useful data per DP slave

- Inputs, max.
- Outputs, max.
244 byte
244 byte
3rd interface
Type of interfaces
PROFINET

max.
1; Intel Pro/1000 (Intel 82573L,

82541PI; non-shared IRQ
required); integrated IE interface
SIMATIC PC 4x7B, 6x7B, 8x7B
Physics
Ethernet
isolated
Yes
4/5
Siemens AG 2009
Logic Control

Automatic detection of transmission speed
Yes; 10/100 Mbit/s
Functionality
4th interface
Type of interface
PROFINET

max.
CP 1616 (HW release 8 and

higher), CP 1604 (HW release 7
and higher), integrated PN interface of SIMATIC PC and S7-mEC
Yes
PROFINET IO device
No
PROFINET CBA
Yes
Physics
Ethernet
Offene IE communication
Yes
isolated
Yes
Web server
No
automatic detection of transmission

speed
Yes; (10/100 MBit/s)
Yes
Yes; S7 routing
Yes
Yes
Yes
PROFINET CBA
Yes
Offene IE communication
Yes
Web server
No

Services
- Routing
- S7 communication
- Open IE communication
Functionality
Total number of connectable

IO Devices, max.
128
IRT, supported
No
Prioritized startup
- Number of IO devices, max.
Yes
32
Activating/Deactivating of
IO devices
Yes
Changing of IO devices during

operation (partner ports),
supported
Yes
Device replacement without

replacement medium
Yes
Send clock times
1 - 512 ms
Updating time
1 - 512 ms (minimum value

depends on communication share
set for PROFINET I/O, on the
number of I/O devices and on the
number of configured user data
items)
256 byte
Number of IO devices with IRT and 64

the option "high flexibility", max.
- davon in line, max.
32
- user data consistency, max.

PROFINET CBA
Services
- Routing
- S7 communication
- Open IE communication
Yes
Yes; S7-Routing
Yes
Yes
Transmission speeds, min.
10 MBit/s; 100 MBit/s, if PN IO

controller configured
100 MBit/s
Number of connectable IO
devices total, max.
256
IRT, supported
Yes
Prioritized startup
- Number of IO devices, max.
Yes
Activating/Deactivating of
IO devices
Yes
32
Acyclic transmission
Yes
Yes
Changing of IO devices during

operation (partner ports),
supported
Yes
Cyclic transmission
PG/OP communication
Yes
Device replacement without

replacement medium
Yes
S7 routing
Yes
Send clock times
250s, 500s, 1ms
S7 communication
Yes
Updating time
16
0.25 - 512 dependent on send

clock times
Open IE communication
User data per address area, max.
2 byte
Yes
PROFINET CBA
Acyclic transmission
Yes
for OUC: needs to be specified by

development
Cyclic transmission
Yes
SIMATIC communication
at interface 3
PROFINET CBA
(at 50 % communication load)
HMI variables via PROFINET
(acyclic)
- Number of log-in stations for HMI
variables (PN OPC/iMap)
PROFIBUS proxy functionality
- Data length of all device-internal
and PROFIBUS interconnections
4/6
2x PN OPC / 1x iMap
SIMATIC communication
PG/OP communication
Yes
S7 routing
Yes
S7 communication
Yes
32
Slave-dependent
Yes
16
at interface 4
needs to be specified by
development
Siemens AG 2009
Logic Control

Isochronous mode
Isochronouos mode
Yes; only PROFIBUS
Number of DP masters with

isochronous mode
Useful data per isochronoous slave,

max.
128 byte
equidistance
Yes
shortest clock pulse
2.2 ms;
2.2 ms without partial process
image; 2.2 ms with partial process
image
CPU/programming
Programming language
STEP 7
Yes; V5.4, SP4 or higher,

Engineering Tools (optional)
LAD
Yes
FUP
Yes
AWL
Yes
SCL
Yes
CFC
Yes
GRAPH
Yes
HiGraph
Yes
Software libraries
Easy Motion Control
Yes
Nesting levels
User program protection/password

protection
Yes
Open development interfaces

CCX (Custom Code Extension)
Yes; WinAC ODK V4.1 or higher
SMX (Shared Memory Extension)

- Inputs
- Outputs

4 Kibyte
4 Kibyte
CMI (Controller Management

Interface)
Hardware requirements
Hardware required
PC with color monitor, keyboard,

mouse or pointing device for
Windows
Resolution (pixels)
Required memory on hard disk,
min.
100 MByte
Main memory, min.
512 MByte
Processor
Intel Celeron M 900 MHz
Multi-processor system
Yes; Dual Pentium CoreDuo,

Core2Duo
Hyperthreading
Yes
Operating systems
Operating system
Windows NT 4.0
No
Windows 2000
No
Windows XP
Yes; Professional, SP2
Dimensions
Weights
Weight, approx.
100 g; with packaging
4/7
Siemens AG 2009
Logic Control
Ordering data
Order No.
B
6ES7 671-0RC06-0YA0
Software-based PC-based control

system for applications requiring
a strictly deterministic response;
PROFIBUS and PROFINET;
CD-ROM with electronic
documentation in English, French
and German;
Single License, running on
Windows XP SP2
Upgrade
6ES7 671-0RC06-0YE0
For upgrading from Basic/RTX

V3.x, V4.0, V4.1 and 2005;
Single License, executable on
Windows XP SP2
SIMATIC WinAC NV128
Order No.
CP 5613 A2 communications
processor
PCI card (32-bit; 3.3 V/5 V) for
connection to PROFIBUS incl.
DP-Base software with NCM PC;
DP-RAM interface for DP master,
incl. PG and FDL protocol; single
license for 1 installation, runtime
software, software and electronic
manual on CD-ROM, Class A, for
32-bit Windows 2000 Professional/Server, Windows XP
Professional, German/English
CP 1616 communications
processor
6ES7 671-0AG00-1YA7
PC plug-in card with non-volatile

memory for the storage of up to
128 Kbyte of retentive data in the
event of voltage failure
processor
6GK1 561-1AA01
PCI card (32-bit) for connection of

a programming device or PC
to PROFIBUS
processor
6GK1 562-1AA00
PCI Express x1 card (32-bit)

CP 5621 and MPI cable, 5 m
6GK1 562-1AM00
CP 5603 Mircobox Package
6GK1 560-3AU00
Consisting of CP 5603
module and expansion rack
Microbox
6GK1 161-6AA00
PCI Card (32-bit; 3.3/5 V universal

keyed) with ASIC ERTEC 400 for
connecting PCs to PROFINET IO
with 4-port real-time switch
(RJ45); incl. IO base software for
PROFINET IO Controller
(RT operation) and NCM PC;
Single License for one installation,
runtime software, software and
electronic manual on CD-ROM,
Class A, for 32-bit
Windows XP Professional;
German/English
CP 1604 Microbox Package
PCI Express x1 card (32-bit) for E

connection of a programming
device or PC to PROFIBUS
6GK1 561-3AA01
6GK1 160-4AU00
Package for implementing the

CP 1604 in the SIMATIC Microbox
PC; comprising the CP 1604,
connection board, power supply
and expansion racks for Microbox
PC; for use with Development Kit
DK-16xx PN IO; NCM PC
Note:
For ready-to-use Embedded systems with preinstalled WinAC RTX see
chapter 2 Embedded Automation.

More information
Addons for SIMATIC WinAC
Application
Function
PC-based Competence Center Cologne
WinAC serial Driver
Communication via serial interfaces
Our Addons complement the Soft-SPS WinAC RTX with useful

functions, which were created within the scope of projects.
Therefore you can use the advantages of PC-based Automation
to full capacity.
WinAC PC IO Driver
Access to central PC IO expansion

including interrupt handling
WinAC SQL
Access to SQL data base
WinAC TCP/IP Driver
For more information and prices please approach your Siemens

contact person or:
Data exchange of WinAC with other

communication partners via Windows
interface using TCP/IP, UDP or ISOon-TCP
WinAC OPC Client
Access to different OPC servers
Contact:
WinAC Shutdown
Controlled shutdown of WinAC and of

PC systems
WinAC File-I/O
Reading and writing of data blocks as

file on the PC system
WinAC Command
Issueing Batch commands from

WinAC
WinAC Access-DB
High-performance access to data

blocks, markers or I/O images
WinAC SMX Cover
Provision of SMX functions e.g. for

Delphi or VB
WinAC CMI Wrapper
Easy program-controlled operation of

WinAC
The applications are available in terms of function blocks and

can be used easily and without special programming skills.
Siemens AG
Competence Center Cologne
Mail: [email protected]
4/8
Siemens AG 2009
Logic Control
SIMATIC WinAC ODK
Overview
6ES7 806-1CC02-0BA0
Open development interfaces
CCX (Custom Code Extension)
Yes; C/C++, Unmanaged Code
SMX (Shared Memory Extension) Yes; C / C++, Unmanaged Code

CMI (Controller Management
Interface)
Yes; C / C++, C#, VB
Hardware requirements
Hardware required
PC with color monitor, keyboard,

mouse or pointing device for
Windows
Resolution (pixels)
Required memory on hard disk,
min.
10 MByte
Main memory, min.
256 MByte
Processor
Intel Pentium 800 MHz
Software requirement
SIMATIC WinAC Software PLCs support powerful interfaces

which allow the control task to be closely integrated with PCbased applications.
WinAC ODK allows users to develop new applications or to
integrate existing applications into the control task
New with WinAC ODK V4.1:
WinAC ODK V4.1 also allows the development of applications
for WinAC Slot and replaces WinAC Slot T-Kit
Application
WinAC ODK can be used to meet the following requirements:
Integration of specific technology into the control task, e.g.
measured data acquisition or analysis, vision systems or
PC-based motion solutions
Access to typical PC resources such as file system, interfaces
etc.
Typical examples of uses for WinAC ODK include:
Connection of specific fieldbus systems to the controller
Direct, powerful connection of the control program to a
production database
Integration of robotics systems
Implementation of specific communication protocols
Software required
MS Visual Developer Studio,

V6.0 SP3;
MS Visual Developer Studio .net
2003;
Ardence SDK V6.5 (only for real
time applications with WinAC RTX
2005)
Operating systems
Operating system
Windows NT 4.0
No
Windows 2000
Yes; Professional, SP3 or higher
Windows XP
Yes; Professional, SP1
Software
Configuration software
Description
WinAC product support for

WinAC RTX 2005 and
WinAC Slot V4.0
Ordering data
Order No.
SIMATIC WinAC ODK V4.1

for using C/C++ code in
WinAC PLCs, runs under
Windows NT 2000/XP;
CD-ROM with electronic
documentation in English
Single License
6ES7 806-1CC02-0BA0
4/9
Siemens AG 2009
Logic Control
Application
Design (continued)
Engineering Tools:
High-level programming languages and technology-based
software
Engineering tools are task-oriented tools which can be used in
addition to STEP 7. They considerably reduce the energy cost
and substantially increase the comfort.
Engineering Tools include:
High-level languages for the programmer.
Graphics languages for the technology specialist.
Supplementary software for diagnosis, simulation, remote
maintenance, plant documentation, etc.
Runtime software:
Ready-to-use runtime software for the production process
4
The SIMATIC industrial software is a system of seamlessly integrated software tools for the automation systems SIMATIC S7
and SIMATIC C7 as well as for PC-based Control
SIMATIC WinAC. It provides convenient functions for all phases
of an automation project:
Planning, configuring and parameterization of hardware and
communication.
Creation of the user program.
Documentation.
Testing, startup, service.
Process control.
Archiving.
Design
SIMATIC industrial software is modular-designed.
The individual tools can be used individually depending on the
particular application.
Four software classes are available:
STEP 7:
Programming base for the SIMATIC hardware
Step 7 is the base for programming the SIMATIC S7/C7/WinAC.
They are always required for programming.
STEP 7:
The full version for any type of application with the Ladder,
Function Block Diagram and Instruction List programming
languages.
STEP 7 Professional, the power package:
Supports all IEC languages (Ladder, Function Block Diagram,
Instruction List, Sequential Function Chart and Structured
Text). Moreover, offline simulation (S7-PLCSIM) is an integrated component.
STEP 7 Lite:
The version for the lower performance range, can be used for
SIMATIC S7-300 and SIMATIC C7.
STEP 7-Micro:
The slimline programming package for the SIMATIC S7-200.
4/10
Runtime software includes readily programmed solutions which

are called by the user program. It is directly integrated into the
automation solution and is available in two variants:
Hardware-bundled:
Software associated with specific hardware.
Hardware-unbundled:
Software with general hardware requirements.
Runtime software includes, for example:
Controls for SIMATIC S7 and WinAC.
Tools for integrating automation systems into Windows applications.
You will find runtime software for PC-based control under
SIMATIC PC-based Control.
Human Machine Interface (HMI):
Software specifically for the Human Machine Interface
Human Machine Interface includes:
SIMATIC ProTool and ProTool/Lite for configuring operator
panels.
SIMATIC ProTool/Pro machine-level visualization with a PC.
SIMATIC ProAgent the option package for process diagnostics.
SIMATIC WinCC flexible engineering tools for configuring
SIMATIC HMI operator panels and high-performance visualization software for simple visualization tasks at machine level.
SIMATIC WinCC the high-performance visualization system
under Windows NT/2000/XP.
Siemens AG 2009
Logic Control
STEP 7
Overview
Components for connecting a PC to MPI and PROFIBUS
The components described below are used to connect
programming devices and PCs (incl. notebooks) to PROFIBUS
and to the multipoint SIMATIC S7 MPI interface in conjunction
with STEP 7.
STEP 7 basic software:

The standard tool for the SIMATIC S7, SIMATIC C7 and
SIMATIC WinAC automation systems.
Makes use of the full performance capabilities of the systems
User-friendly functions for all phases of an automation project:
- Configuring and parameterizing the hardware
- Definition of communication
- Programming
- Testing, commissioning and service
- Documentation, archiving
- Operating, diagnostics functions
PC adapter USB
To connect a PC to the SIMATIC S7 programmable controller
via the USB port
Connectable to USB 1.1 and 2.0 ports
Applicable for SIMATIC S7-200, S7-300, S7-400 and C7
Supports routing
Automatic transmission rates and profile search
Noticeably improved performance (up to three times faster
than the PC adapter via RS 232)
Including subsequently updatable firmware (e.g. for function
expansions or troubleshooting)
Applicable in Windows 2000, Windows XP Home and
Scope of delivery:
- PC adapter USB
- CD "SIMATIC Software PC Adapter USB" including software
and documentation
- USB cable, 5 m
- MPI cable, 0.3 m
CP 5512
For programming devices/ PCs/notebooks with PCMCIA slot
PCMCIA slot Type II (32 bit cardbus)
Incl. adapter with 9-pin sub-D socket for connection to
PROFIBUS
CP 5611/CP 5611-MPI
For programming devices/PCs with PCI slot
Short PCI card (32 bit)
CP 5611-MPI including MPI cable
CP 5621/CP 5621-MPI
Short PCI Express card (x1).
CP 5621-MPI including MPI cable
Components for connecting the PC to Industrial Ethernet
The PC modules described below are used to connect
programming devices and AT-compatible PCs/notebooks to
Industrial Ethernet in conjunction with STEP 7 and SOFTNET-PG
(as of V6.0).
CP 1612
Short PCI card (32 bit); 10/100 Mbit/s
Incl. RJ45 socket for connection to Industrial Ethernet
Please refer to the respective product catalog for technical information regarding product versions and supported operating
systems.
You will find additional information about the online connection
of PCs and SIMATIC S7/C7 controllers under
SIMATIC NET Communication Systems".
4/11
Siemens AG 2009
Logic Control
STEP 7
Ordering data
Order No.
STEP 7 reference manuals
Target system:
SIMATIC S7-300/400,
SIMATIC C7, SIMATIC WinAC
Requirements:
Windows XP Prof., Vista Ultimate,
Vista Business
Type of delivery:
German, English, French,
Spanish, Italian;
incl. license key on USB stick,
without documentation
Consisting of STL, LAD and FBD

manuals as well as a reference
manual for standard and system
functions for SIMATIC S7-300/400
Floating license on DVD

Rental license for 50 hours
Order No.
STEP 7 Version 5.4
6ES7 810-4CC08-0YA5
6ES7 810-4CC08-0YA6
Software Update Service on DVD

(requires current software
version)
6ES7 810-4BC01-0YX2
Upgrade Floating License

3.x/4.x/5.x to V5.4; on DVD
6ES7 810-4CC08-0YE5
Trial License STEP 7 V5.4;

on DVD, 14 day trial
6ES7 810-4CC08-0YA7
German
6ES7 810-4CA08-8AW1
English
6ES7 810-4CA08-8BW1
French
6ES7 810-4CA08-8CW1
Spanish
6ES7 810-4CA08-8DW1
Italian
SIMATIC Manual Collection
Target system:
SIMATIC S7-300/400,
Requirements:
Japanese
Delivery package:
English, Japanese; incl. license
key on USB stick, without
documentation

update service for 1 year
6ES7 998-8XC01-8YE2
EPROM programming device,

USB prommer
6ES7 792-0AA00-0XA0
For programming SIMATIC

memory cards and EPROM
modules
MPI cable
Floating License Japanese on

DVD
6ES7 810-4CC08-0JA5
For linking SIMATIC S7 and CP

through MPI (5 m)

Japanese 3.x/4.x/5.x to V5.4;
on DVD
6ES7 810-4CC08-0JE5
Components for connecting a

PC to MPI and PROFIBUS
6ES7 901-0BF00-0AA0
For PCs with a free PCI slot:

CP 5611
STEP 7 Version 5.4, Chinese
CP 5611 MPI
Target system:
SIMATIC S7-300/400,
Requirements:
Windows XP Professional Chinese
Delivery package:
English, Chinese; incl. license key
on USB stick, without documentation
6GK1 561-1AA01
A
6GK1 561-1AM01
PCI Express x1-card (32-bit)
6GK1 562-1AA00
PCI Express x1-card (32-bit)

incl. MPI-cable, 5 m
6GK1 562-1AM00
incl. MPI cable (5 m)

Communications processor
CP 5621
Floating License Chinese on DVD
6ES7 810-4CC08-0KA5
For PCs with a free PCMCIA slot:

Chinese 3.x/4.x/5.x to V5.4;
on DVD
6ES7 810-4CC08-0KE5
CP 5512
6GK1 551-2AA00
For Windows XP Professional

For PCs without a free PCI slot:
Documentation package
STEP 7 basic information
PC adapter USB
6ES7 972-0CB20-0XA0
For connecting a PC to S7-300/

-400/C7 through a USB interface;
with USB cable (5 m)
Comprising Getting Started,

hardware configuration manual,
programming manual, migration
manual
German
6ES7 810-4CA08-8AW0
Components for connecting the

PC to Industrial Ethernet
English
6ES7 810-4CA08-8BW0
For PCs with a free PCI slot:
French
6ES7 810-4CA08-8CW0
Layer 2 Ethernet cards
Spanish
6ES7 810-4CA08-8DW0
For PCs with a free PCMCIA slot:
Italian
6ES7 810-4CA08-8EW0
SOFTNET-PG Edition 2008
Subject to export regulations: AL: N and ECCN: EAR99H

4/12
6ES7 998-8XC01-8YE0
Electronic manuals on DVD, five

languages: S7-200/300/400, C7,
LOGO!, SIMATIC DP, PC, PG,
STEP 7, engineering software,
runtime software, PCS 7,
SIMATIC HMI, SIMATIC NET
Current "Manual Collection" DVD

and the three subsequent
updates
STEP 7 Version 5.4 Japanese
A)
B)
E)
Z)
6ES7 810-4CA08-8EW1
B
6GK1 704-1PW71-3AA0
Siemens AG 2009
Logic Control
STEP 7 Professional
Overview
STEP 7 Professional supports all IEC languages.
In addition to the languages recognized by STEP 7
LAD
FBD
IL
The following are also available:
"Sequential Function Chart"
"Structured Text"
An offline simulation of programs created with these languages
is included. STEP 7 Professional thus replaces the combination
of the individual packages STEP 7, S7-GRAPH, S7-SCL and
S7-PLCSIM.
A POWERPACK is offered to customers who use STEP 7 already
and wish to change. A valid STEP 7 license is required for
purchasing the POWERPACK. A separate update service is
available for STEP 7 Professional.
Ordering data
Order No.
STEP 7 Professional
Edition 2006
STEP 7 reference manuals

Consisting of STL, LAD and FBD
manuals as well as a reference
manual for standard and system
functions for SIMATIC S7-300/400
Target system:
SIMATIC S7-300/400,
Requirements:
Windows XP Prof., Vista Ultimate,
Vista Business
Type of delivery:
German, English, French,
Spanish, Italian; license key on
USB stick, without documentation
Floating license on DVD
Rental license for 50 hours
Order No.
6ES7 810-5CC10-0YA5
6ES7 810-5CC10-0YA6
German
6ES7 810-4CA08-8AW1
English
6ES7 810-4CA08-8BW1
French
6ES7 810-4CA08-8CW1
Spanish
6ES7 810-4CA08-8DW1
Italian
6ES7 810-4CA08-8EW1
6ES7 998-8XC01-8YE0
6ES7 998-8XC01-8YE2

languages: S7-200/300/400, C7,
runtime software, PCS 7, S
IMATIC HMI, SIMATIC NET
Software Update Service on DVD

version)
6ES7 810-5CC04-0YE2
Upgrade of Floating License to

Edition 2006; on DVD
6ES7 810-5CC10-0YE5
Powerpack Floating License for

upgrading from STEP 7 to
STEP 7 Professional
6ES7 810-5CC10-0YC5

Trial License STEP 7 Professional

Edition 2006;
on DVD, runs for 14 days
6ES7 810-5CC10-0YA7

updates
EPROM programming device,
USB prommer
Documentation package
STEP 7 basic information
6ES7 792-0AA00-0XA0

through MPI (5 m)
Comprising Getting Started,

hardware configuration manual,
programming manual, migration
manual
MPI cable
German
6ES7 810-4CA08-8AW0
English
6ES7 810-4CA08-8BW0
French
6ES7 810-4CA08-8CW0
Spanish
6ES7 810-4CA08-8DW0
Italian
6ES7 810-4CA08-8EW0
6ES7 901-0BF00-0AA0

through MPI (5 m)
Components for connecting a
PC to MPI and PROFIBUS
see STEP 7, page 4/10
Components for connecting the

PC to Industrial Ethernet
see STEP 7, page 4/10

4/13
Siemens AG 2009
Logic Control
S7-SCL
Overview
Ordering data
Order No.
SIMATIC S7-SCL, Version 5.3

Task:
High-level language
programming
Target system:
SIMATIC S7-300 (CPU 314 and
higher), SIMATIC S7-400,
Requirement:
STEP 7 V5.3 and higher
Delivery package:
on CD; German, English, French,
Spanish, Italian; incl. authorization diskette, with electronic
documentation
Floating license
6ES7 811-1CC05-0YA5
Software Update Service

version)
6ES7 811-1CA01-0YX2
Upgrade floating to V5.3

PASCAL-type high-level language

Optimized for programming programmable controllers
With PLCopen Base Level certificate
For use in SIMATIC S7-300 (recommended for CPU 314 and
CPU 312C or higher), S7-400, C7 and WinAC
6ES7 811-1CC05-0YE5
B
6ES7 998-8XC01-8YE0
6ES7 998-8XC01-8YE2

languages: S7-200/300/400, C7,
updates
4/14
Siemens AG 2009
Logic Control
S7-GRAPH
Overview
Ordering data
Order No.
SIMATIC S7-GRAPH,
Version 5.3
Task:
Configuration and programming
of sequences
Target system:
SIMATIC S7-300,
SIMATIC S7-400, SIMATIC C7,
SIMATIC WinAC
Requirement:
Delivery package:
documentation
Floating license
6ES7 811-0CC06-0YA5

version)
6ES7 811-0CA01-0YX2
Floating license upgrade to V5.3
For configuring and programming sequential processes using

sequencers
Standardized representation to DIN EN 1131-3
Clearly comprehensible program thanks to structuring of the
process into separate steps
With extensive diagnostics functions, integrated into the
SIMATIC diagnostics concept
With PLCopen Base Level certificate
For use in SIMATIC S7-300 (recommended for CPU 315 and
CPU 312C or higher), S7-400, C7 and WinAC
6ES7 811-0CC06-0YE5
B
6ES7 998-8XC01-8YE0
6ES7 998-8XC01-8YE2

languages: S7-200/300/400, C7,
updates
4/15
Siemens AG 2009
Logic Control
S7-HiGraph
Overview
Ordering data
Order No.
SIMATIC S7-HiGraph,
Version 5.3
Task:
Programming of state diagrams
Target system:
SIMATIC S7-300,
SIMATIC S7-400, SIMATIC C7,
SIMATIC WinAC
Requirement:
Delivery package:
documentation
Floating license
6ES7 811-3CC05-0YA5

version)
6ES7 811-3BA01-0YX2
Floating license upgrade to V5.3

For graphic description of asynchronous processes using

state graphs
Also particularly suitable for machine constructors (technologists), commissioning engineers and service engineers
Extremely flexible using freely-positionable graphic elements
With integrated monitoring and signaling functions
Can be used in SIMATIC S7-300, S7-400, C7 and WinAC
6ES7 811-3CC05-0YE5
B
6ES7 998-8XC01-8YE0
6ES7 998-8XC01-8YE2

languages: S7-200/300/400, C7,
updates
4/16
Siemens AG 2009
Logic Control
CFC
Overview
Ordering data
Order No.
SIMATIC CFC, Version 7.0

Task:
Graphic configuring and
programming of automation applications in the form of technologyoriented diagrams
Target system:
SIMATIC S7-300/400,
SIMATIC WinAC, D7-SYS
Requirements:
STEP 7 V5.3 and higher, also
S7-SCL V5.1 SP3 and higher
Delivery form:
Engineering software and
electronic documentation on
CD-ROM, License Key Disk,
Emergency Key Disk, Certificate
of License, Terms and Conditions
For creating automation programs by drawing a function chart

With extensive libraries of prefabricated function blocks to
which function blocks created by the user can be added
Reduced costs and fewer mistakes by simply interconnecting
read-to-use function blocks
Optimized integration in the world of automation, for example,
through guaranteed compatibility with all STEP 7 tools
Can be used for SIMATIC S7-300 (recommended for CPU 316
or CPU 314C or higher), SIMATIC S7-400, SIMATIC WinAC
and D7-SYS
Floating license
6ES7 658-1EX07-2YA5
Upgrade to floating license V7.0
6ES7 658-1EX07-2YE5

version)
6ES7 658-1EX00-2YL8
6ES7 998-8XC01-8YE0
6ES7 998-8XC01-8YE2

languages: S7-200/300/400, C7,
updates
4/17
Siemens AG 2009
Logic Control
SIMATIC iMap
Overview
Ordering data
Order No.
SIMATIC iMap V3.0
4
Component-based software tool for configuring the communication in distributed automation solutions
For easy graphical configuration of the communication
between subsystems and machine-to-machine communication in the production line
Based on the PROFINET standard
Open for PROFINET devices from various manufacturers on
Industrial Ethernet
Runs under Windows 2000, Windows XP Professional and
Windows 2003 Server
Target system:
CPU 31x-2 PN/DP,
CPU 319-3 PN/DP,
SIMATIC WinAC PN,
SIMATIC NET IE/PB Link,
SIMATIC NET CP 343-1,
SIMATIC NET
CP 343-1 Advanced,
SIMATIC NET
CP 443-1 Advanced,
distributed I/O devices with own
CPU, PROFINET CBA OPC
server, devices on the Industrial
Ethernet based on the PROFINET
CBA standard, SIMATIC OPs,
SIMATIC ProTool/Pro
Requirements:
Windows 2000 Prof. with
Service Pack 4 or later or
Windows XP Prof. with
Windows 2003 Server with
Service Pack 1 or later;
on PG or PC with Pentium
processor, min. 1 GHz;
STEP 7 V5.3 or later with Service
Pack 3, PN OPC Server V6.3 or
later
Delivery form:
German, English, with electronic
documentation
Single license
6ES7 820-0CC04-0YA5

version)
6ES7 820-0CC01-0YX2
Upgrade to V3.0,
single license
6ES7 820-0CC04-0YE5
4/18
Siemens AG 2009
Logic Control
Programming devices
Field PG M2
Overview
Ordering data
Order No.
SIMATIC Field PG M2
programming device
Z
Field PG M2 Standard:
2.0 GHz Core 2 Duo processor
(T7250, 800 MHz, 2ML L2c),
Multi Standard DVD-RW drive,
15" XGA display (1024x768),
80 GB serial ATA hard disk,
1 x 1 GB DDR 2 RAM
6ES7 713-0AA0 7 - 0 7 7 11
Z
Field PG M2 Premium:
2.2 GHz Core 2 Duo processor
(T7500, 800 MHz, 4MB L2c),
Multi Standard DVD-RW drive,
15" SXGA+ display (1400x1050),
160 GB serial ATA hard disk,
1 x 2 GB DDR2 RAM
6ES7 713-1BB1 7 - 0 7 7 11
Power cable (required)
The mobile, industrial programming device with powerful Intel

Core 2 Duo processor.
Optimal for startup, service and maintenance of automation
systems.
Industrial notebook with wireless technology, large display,
long battery service life, high-speed RAM, and integral data
backup concept.
With all commonly used interfaces for industrial applications.
For brochures serving as selection guides for SIMATIC products
refer to:
http://www.siemens.com/simatic/printmaterial
for Germany, France, the

Netherlands, Spain, Belgium,
Austria, Sweden, Finland;
Keyboard: International
(& German);
WLAN module with CE
For Great Britain;

(& German);
WLAN module with CE
For Switzerland;
(& German);
WLAN module with CE
for the USA, Japan;

(& German);
WLAN module with UL, FCC,
CCC (no CE)
For Italy;
(& German);
WLAN module with CE
for Germany, France, the

Netherlands, Spain, Belgium,
Austria, Sweden, Finland;
keyboard: French (AZERTY)
with country-specific labeling
for France, Belgium,
Switzerland;
WLAN module with CE
For Switzerland;
Keyboard: French (AZERTY)
with country-specific labeling
for France, Belgium,
Switzerland;
WLAN module with CE
For China;
(& German);
WLAN module with UL, FCC
and CCC (no CE!)
4/19
Siemens AG 2009
Logic Control
Programming devices
Field PG M2
Ordering data
Order No.
Order No.
SIMATIC Field PG M2
programming device
Accessories
Memory expansion
Field PG M2 Standard
6ES7 713-0AA0 7 - 0 7 7 11
Field PG M2 Premium
6ES7 713-1BB1 7 - 0 7 7 11
Operating system
English MUI
(Fr., Span., Ital., Ger.; image
stored on HD, other language
packages available for
downloading)
Windows VISTA Ultimate Engl.

32-bit (Fr, Sp, It, Ger; image
stored on HD, other language
packages available for
downloading.
(Note:
WinCC flexible Advanced 2007
and STEP 5 are not preinstalled
and are enclosed. WinCC flex.
Advanced 2007 and STEP 5 are
not runnable on Windows
VISTA.)
1 GB DDR 2 RAM 667 MHz
6ES7 648-2AG40-0HA0
2 GB DDR 2 RAM 667 MHz
6ES7 648-2AG50-0HA0
USB mouse (PS/2-compatible) A
6ES7 790-0AA01-0XA0
AC/DC external power supply

unit
6ES7 798-0GA00-0XA0
Power cable
Licenses for the SIMATIC

software
Trial license for STEP 7 Professional, WinCC flexible
Advanced
Upgrade license STEP 7

Professional, STEP 5, WinCC
flexible Advanced
(requires license for STEP 7
Prof./STEP 5 (at least V3.0))
Powerpack license STEP 7

Professional,
Upgrade STEP 5, WinCC
flexible Advanced
(requires license for STEP 7 /
STEP 5 (at least V3.0))
License STEP 7 Professional,

STEP 5, STEP 7-Micro/WIN,
WinCC flexible Advanced; incl.
EPROM adapter and S5-CC
cable
License for STEP 7, STEP 7

Micro/WIN, WinCC flexible
Advanced
License for STEP 7 Professional, STEP 5, STEP 7

Micro/WIN, WinCC flexible
Advanced
for Germany, France, the Netherlands, Spain, Belgium, Austria,

Sweden, Finland
6ES7 900-5AA00-0XA0
For Great Britain
6ES7 900-5BA00-0XA0
For Switzerland
6ES7 900-5CA00-0XA0
For USA
6ES7 900-5DA00-0XA0
For Italy
6ES7 900-5EA00-0XA0
for China
6ES7 900-5FA00-0XA0
Spare battery
(lithium ion, 6.6 Ah)1)
6ES7 798-0AA05-0XA0
MPI cable
6ES7 901-0BF00-0AA0
for connecting a PG and

SIMATIC S7 via MPI; 5 m
S5 EPROM programming
adapter
6ES7 798-0CA00-0XA0
for SIMATIC S5 EPROM

programming using the Field PG
S5 PLC cable
6ES5 734-2BF00
For connecting programming

devices to SIMATIC S5 PLCs, 5 m
Hard disk kit
6ES7 791-2BA00-0AA0
6ES7 790-1AA00-0AA0
Replaceable hard disk 160 GB

serial ATA;
with protective pocket and Torx
screwdriver
Adapter serial ATA to USB
For using the replaceable hard
disk of the hard disk kit as an
external hard disk (only for
Field PG M2 or Field PG M)
Rucksack for Field PG
36-months service option

for SIMATIC Field PG M/M2 2)
6ES7 798-0DA00-0XA0
Z
A5E00510007
1)
The capacity of the battery decreases for technological reasons with each
charging/discharging operation and also as the result of being stored at
excessively high or low temperatures. The running time per charge
decreases therefore in the course of time. In normal use the battery can be
charged and discharged over a period of six months from when the field
PG is purchased.
Capacity loss is not covered by the warranty. For the batterys operation we
grant a warranty of six months. We recommend replacing the battery with
an original Siemens battery at the end of these six months if there is a significant drop in performance.
2)
Service option can be activated up to 90 days after delivery.


7
4/20
Siemens AG 2009
5/2
Excellence in Motion Control
5/3
Easy Motion Control
5/6
5/6
5/7
5/8
5/9
5/10
5/12
5/13
SIMOTION
The system
Hardware platforms
Runtime system
Engineering software
PC-based SIMOTION P350-3
PC-based
MCI-PN Communication Board
PC-based Panel fronts
5/14
5/14
5/17
SINAMICS
The drive family
SINAMICS S120 built-in devices
Siemens AG 2009

Excellence in Motion Control
Overview
Motion Control Solutions "Made by Siemens"
The Motion Control Systems division of the Industry Sector Drive
Technologies offers complete future-oriented automation solutions for machine tools and production machines.
Furthermore, Siemens supports its customers over the entire life

cycle of a machine, e.g. with worldwide presales and aftersales
service at more than 295 service points in 130 countries or with
special services for Motion Control solutions such as application
consulting and Mechatronics Support.
Thanks to the strong innovation capacity, the sector know-how

and the outstanding customer benefit of these solutions,
Siemens is one of the leading suppliers of Motion Control Systems worldwide. Therefore we are able to present many references in various areas.
Application support:
The safe path to top solutions
Innovative products, systems, solutions and services for

each sector
Siemens Motion Control Systems achieve very high requirements: All products stand out through the use of the latest technologies, high functionality and quality. In addition, the individual
systems and products are optimally matched to one another so
that they can be easily and consistently combined into an economic machine solution.
Examples of this are the Motion Control System SIMOTION and
the drive system SINAMICS. These products constitute an innovative system platform, with which you can optimally adapt the
control system to your machine requirements. As a result you
can find optimized, economic and future-oriented Motion Control
solutions for different sectors such as the packaging, plastics
and glass, timber and metal, textile and printing industries which
can be easily expanded for increased requirements and combined with our high performance servo, linear, torque and standard motors.
Several application centers in China, France, Germany, Italy,

Turkey and the USA support the specialist and application
consultants on site who accompany customer projects from
planning through startup - from the idea to the operational
machine.
Application consulting includes:
Planning and implementing projects
Technical verification with test configuration and simulation
Development of requirements and functional specifications
Application workshops and customer-specific training
courses
Partnership for joint success
During this cooperation Siemens not only supports its customers, but also includes them as technology partners in the development process of systems and components which results in
practical and future-oriented automation solutions.
In this way Siemens helps its customers to increase productivity,
competitiveness and profitability over the long term.
More information
For more information on the SIMOTION Motion Control system
and the SINAMICS S120 drive system see:
Catalogs IK PI, PM 21, NC 61, CA 01
Internet:
www.siemens.com/simotion
www.siemens.com/sinamics
5/2
Siemens AG 2009

Easy Motion Control
Overview
Low-priced package for simple, controlled positioning and

simple geared synchronous motion
For use with any standard drive with alterable speed, such as,
for example, frequency inverter, servo drive
For incremental and absolute encoders
Reduction in runtimes of function blocks
Modification of FB names in conformance with PLCopen 1.0
Gearbox synchronism (MC_GearIn)
Driver for CPU 314C (CPU FW Version 2.0 or newer)
PROFIBUS DP driver for MM4
Application
Easy Motion Control is a low-cost package for simple positioning
control and for simple gearbox synchronism for up to three axes.
It is suitable for use with any variable-speed standard drive, e.g.,
frequency converter, servo drive.
Function
Easy Motion Control offers the following basic functions for
positioning:
Absolute traverse:
The axis travels to the specified position. With rotary axes, the
destination can be approached in the positive or negative
direction, or via the shortest path.
Relative traverse:
The axis travels the defined distance in the positive or negative direction.
Homing, set reference point:
Synchronizes the dimensionn system with the mechanical
system.
Gearbox synchronism:
The axis moves with respect to another axis with gearbox
synchronism.
Jog:
The axis moves as long as the control bit for one direction is
present.
Stop:
Cancels traversing and brings the axis to standstill.
Simulation:
A program can be tested even if no real axes are present and
no actual values are read in.
Override:
A factor between 0 and 100% can be applied to the speed of
movement at any time. Acceleration and deceleration are not
affected by this factor.
Substitute traverse:
Each traverse block can substitute another one. The current
movement is transferred to the new movement with the defined acceleration or deceleration.
Further function blocks must be incorporated into the user program in addition, such as the position controller or input/output
drivers.
The Easy Motion Control blocks are called in a timecontrolled
level, e.g., a cyclic interrupt.
The function blocks of Easy Motion Control have been developed according to the technical specifications of PLCopen,
version 1.0.
Incremental and absolute value encoders are supported.

Fields of application include:
Single operating axes
Positioning/setup axes
Palletizers
Feed devices or
Material transport
in the following sectors:
Warehousing
Woodworking and metal processing
Packaging
Paper processing
Food industry etc.
5/3
Siemens AG 2009

Easy Motion Control
Supported hardware:
Easy Motion Control is runnable on the following CPUs:
S7-300 from CPU 314 and higher.
S7-400.
C7 C7-633 or higher.
WinAC (via PROFIBUS).
SM 338.
FM 350-1, FM 450-1.
SIMODRIVE sensor with PROFIBUS DP.
Other modules for measuring actual values (using free driver).
Supported modules for setpoint output:

ET 200S 2AO U.
SM 332.
SM 432.
Other modules for setpoint output (using free driver).
Supported modules for the measuring of actual values:

CPU 314C (FW version 2.0 of the CPU or higher).
ET 200S 1 Count 5V/500 kHz.
ET 200S 1 Count 24V/100kHz.
ET 200S 1SSI.
Supported drives using PROFIBUS DP:

MM4
Storage space requirements

Required main storage in byte
Block
Required main storage

per block
Additional main storage required per instance
MC_Init
1086
MC_MoveAbsolute
3924
112
MC_MoveRelative
2982
110
MC_MoveJog
3110
110
MC_Home
2886
104
MC_StopMotion
1114
70
MC_Control
1756
58
MC_Simulation
410
64
MC_GearIn
3476
128
Input driver
1416 ... 2654
76 ... 128
Output driver
384 ... 1242
52 ... 68
Axis data block
294
Runtime load
Typical runtimes of the blocks in s
Block
CPU 416-2 DP
6ES7 4162XK02-AB0
CPU 314C
6ES7 314-6CF00-0AB0
CPU 315-2 DP
6ES7 315-2AF03-0AB0
WinLC RTX 3.1

on AMD, 1333 MHz
MC_Init
53
967
2203
21
MC_MoveAbsolute 1)
67
908
2138
18
MC_MoveRelative 1)
67
911
2143
18
MC_MoveJog
1)
48
605
1387
15
MC_Home 1)
49
592
1332
15
MC_StopMotion 1)
23
309
696
MC_Control
27
343
819
11
MC_Simulation
23
259
584
MC_GearIn
66
931
2130
21
Input driver
50
662
1323
44
Output driver
20
223
413
31
1) The highlighted travel blocks require more runtime once at the start of a trip. For more information please consult the manual.
5/4
Siemens AG 2009

Easy Motion Control
Ordering data
Order No.
Easy Motion Control V2.1

Task:
Controlled positioning with
standard drives with variable
speed
Requirement:
STEP 7 V5.3 SP2
Delivery package:
incl. documentation (German,
English),
Single license
6ES7 864-0AC01-0YX0
Single license, without software

and documentation
6ES7 864-0AF01-0YX0
5/5
Siemens AG 2009

SIMOTION
The system
Overview
The system approach
PLC
functionality
(IEC 61131-3)
Motion Control
(e. g. positioning, synchronous operation, etc.)
Engineering system
SIMOTION
Runtime software
For programming,
parameterization, ...
PLC
Graphical or text-based
programming
Gear
Test and
diagnostics
Positioning
Cam
Interpolation
Fusion of Motion Control,

PLC, and technology
functions
Technology
functions
(e. g. hydraulic control,
temperature control, etc.)
G PM10 EN 00125
SIMOTION is available for all machines carrying out Motion

Control tasks - from simple machines to the high-performance
variety. The focus is on a simple and flexible solution to a huge
variety of Motion Control tasks. In order to achieve this in the best
way possible, a new system approach has been introduced:
Hardware platforms
Controller-based
PC-based
Drive-based
Motion Control has been combined with two other control functions found in most machines: PLC and technology functions.
This approach enables the Motion Control of axes and machine
control within the same system. The same applies to technology
functions, such as pressure control of a hydraulic axis. A seamless switch can be made from position-controlled positioning
mode to pressure control.
Combining the three control functions of Motion Control,
Logic Control (PLC) and technology functions has the
following benefits:
Reduced engineering overhead and increased machine
performance
Fast system response time-critical interfaces between the individual components are no longer required
Simple, uniform and transparent programming and diagnostics of the entire machine
The SIMOTION system comprises three components:
Engineering system
Motion Control, PLC and technology tasks can all be performed
within an integrated system. The engineering system provides
all the tools required for these tasks: From programming and
parameterization, through testing and commissioning, to diagnostics.
Runtime software
The runtime system offers an ingenious execution system for
cyclic and sequential tasks. The runtime modules make the different PLC, Motion Control and technology functions available.
By selecting the appropriate modules, the overall functionality of
the system can be flexibly adapted to the machine.
Hardware platforms
The hardware platforms form the basis of the SIMOTION Motion
Control system. The application created by the engineering
system and the associated Runtime software modules can be
used on various hardware platforms.
Thus you can always select the platform which is most suited to
your machine, whether as a controller, an industrial PC or an
Intelligent Module directly in the drive.
5/6
G_PM10_EN_00126
The fast path to the automation solution

Using these system components, our concept of ready-to-apply
standard applications and complete machine solutions called
SIMOTION Easy Set (Ready to Run), you can reduce your engineering costs as well as the duration of your project, allowing
you to create your own automation solution more quickly.
Siemens AG 2009

SIMOTION
Hardware platforms
Overview
Automation systems are primarily identified by the following
characteristics:
System-specific characteristics, e.g., functionality and engineering
Hardware-dependent characteristics, e.g., performance,
design and expandability
SIMOTION C Modularity and flexibility
However, mechanical engineering demands vary greatly,

depending on the version of the machine in question.
Every hardware platform has its benefits when used in certain
applications. The various platforms can also be combined very
easily, which is a particular advantage in modular machines and
plants. This is because the individual hardware platforms always
contain the same system characteristics, i.e., functionality and
engineering are always identical, irrespective of the platform
used.
PROFIBUS or PROFINET can be used to create the link to the
drives and the I/Os remotely.
PROFIBUS/PROFINET can also be used for communication with
HMI devices such as SIMATIC HMI or higher-level controllers
such as SIMATIC S7. This means that SIMATIC HMI panels as
well as PCs with ProTool/Pro or WinCC flexible can be used as
operator systems.
Even 3rd party applications communicate with SIMOTION by
means of the OPC interface.
SIMOTION D Compact and integrated in the drive
SIMOTION C is a controller based on the SIMATIC S7-300 design. It is supplied with four integrated interfaces for analog or
stepper drives and several integrated digital inputs and outputs.
SIMOTION C can also be expanded using I/O modules from the
SIMATIC S7-300 range. Furthermore, the controller is supplied
with two PROFIBUS interfaces supporting PROFIdrive and an Industrial Ethernet interface, thus offering great flexibility in communication.
SIMOTION P Open for other tasks
In SIMOTION D, the SIMOTION functionality is integrated directly in the closed-loop control module of the SINAMICS S120
drive system. Therefore, the complete system (consisting of the
open-loop control and the drive) is extremely compact and powerful. Two SIMOTION D versions are available: as a single-axis
SIMOTION D410 system and as a multi-axis SIMOTION D4x5
system in different performance variants. This ensures a high
degree of scalability and flexibility. The field of application
ranges from single axes to high-performance multi-axis machines.
SIMOTION D4x5 is supplied with two integrated PROFIBUS interfaces supporting PROFIdrive and two integrated Industrial
Ethernet interfaces. An optional Communication Board is used
to connect via PROFINET. With SIMOTION D410, a PROFIBUS
variant or a PROFINET variant can be selected.
SIMOTION P350 is a PC-based Motion Control System. The operating system is Windows XP Professional, with a real-time expansion for SIMOTION. Apart from the SIMOTION machine applications, additional PC applications can execute at any time,
e.g. the SIMOTION engineering system, an operator control application, process data evaluation, and other standard PC applications. Due to the high processor performance, SIMOTION
P350 is optimized for applications with the highest performance
requirements (e.g. hydraulic applications with highly dynamic
position and pressure control loops).
Several panel variants in various screen sizes are available for
operating the industrial PC. These panels can either be operated
using a keyboard and mouse, or a touch screen. The drives and
I/Os are connected via two PROFIBUS interfaces supporting
PROFIdrive or PROFINET with an optional Communication
Board.
5/7
Siemens AG 2009

SIMOTION
Runtime system
Overview
Multi-layer software architecture
Technology packages
With SIMOTION, motion tasks in many different machines are

performed easily and uniformly.
Each of these packages provides complete functionality for the

technology in question. For example, the Motion Control technology package provides all functions for precise positioning
movements, including camming.
Scalable functionality
It also handles the cyclic exchange of setpoints and actual values with the drive including position control, calculation of the
movement profile, removal or overriding of motions, homing
functions, encoder changeover, axis release, status information,
and more.
The technology packages, function libraries and multi-layer

architecture of the runtime system combine to achieve for the
scalable functionality of SIMOTION:
Control functionality
Scalable
Thanks to various functionality levels
Thanks to software modules and technology packages with
extensive functionality
Technology packages
Function libraries
Flexible
Thanks to the integrated PLC following IEC 61131-3 standards
Thanks to technology packages that can be used limitlessly
Thanks to a broad functional scope with a complex command
set as well as function blocks according to the PLCopen standard
Thanks to the option to run servo, vector, stepper, and hydraulic drives
Thanks to the ability to combine the various technology packages and function libraries
Expandable
Thanks to standard functions of the function libraries
User program
Customized
SIMOTION
application
G_PM10_EN_00127
To facilitate this, a very special, multi-layer architecture was chosen as the runtime system. All SIMOTION devices provide basic
functionality such as PLC functionality with a command set according to IEC 61131-3 and a cam controller. You can expand
this basic functionality using the included technology packages
and function libraries.
In addition to the Motion Control technology package (including

positioning, synchronous operation, output cam, and path interpolation), packages for other technologies, e.g. temperature
control, are also available.
Cam
Gear
Hydraulic
control
Other
technologies
G_PM10_EN_00128
Positioning Cam
Temperature Path interpolation

control
Function libraries
The function libraries offer standard functions
For integration of special I/O modules (e.g. counter modules,
communication modules, AS-Interface, etc.)
For expanding the system functions (e.g. closed-loop controllers)
Modular user functions can also be stored as libraries for standardized implementation in projects:
5/8
Siemens AG 2009

SIMOTION
Overview
Focus is on user friendliness
Programming for everyone
As the performance capability of a system grows, so do the requirements on its user-friendliness: With SCOUT, the engineering system for SIMOTION, particular emphasis has therefore
been placed on user-friendliness:
The engineering for Motion Control, PLC and technology as
well as the drive configuration and commissioning are all performed in the same manner in the same engineering environment.
All tasks are largely resolved in a graphical manner:
Configuring, programming, testing and commissioning.
Intuitive operation, context-sensitive help functions and automatic consistency checks make engineering easier, especially for those users who are new to Motion Control programming.
All the tools that are associated with the SCOUT engineering
system are integrated giving a uniform Look & Feel.
When programming SIMOTION you can choose between:

Graphic programming using the MCC (Motion Control Chart),
graphic configuration with DCC (Drive Control Chart), PLC style
withLAD (Ladder Diagram)/FBD (Function Block Diagram), or
with the ST (Structured Text) high-level, text-based, language the SCOUT engineering system supports them all.
The SCOUT engineering system supports you step-by-step

making the engineering easy and efficient.
The appropriate tools are then called from the central project
management, e.g. for entering a cam or for commissioning a
drive.
SCOUT can be used in SIMATIC STEP 7, either with integrated

data management and configuration, or as a stand-alone engineering tool (SCOUT Stand-Alone).
In addition to Motion Control commands (e.g. referencing of

axis), commands for I/O access, logic and calculations, subroutine calls and control of the program flow are also available.
Complex motion relationships are also easy to set up using the
graphical cam editors.
Central management with integrated tools
All the data for your complete machine can be managed in a
single project: Configuration data, programs, movement profiles, drive data and HMI.
Test and diagnostics

SCOUT supports the testing, commissioning and error diagnostics of SIMOTION applications with a series of tools, such as
those providing program status, control variables, trace, and the
axis control panel.
5/9
Siemens AG 2009

SIMOTION
Overview
Design (continued)
Communication
PROFINET version
The MCI PN Communication Board that has been integrated in
the PROFINET version enables the SIMOTION P350-3 to be
connected to a PROFINET IO network. From a PROFINET perspective, the SIMOTION P350-3 thus assumes the role of a
PROFINET IO controller.
To enable it to communicate with other PROFINET controllers,
the SIMOTION P350-3 can be configured as both a PROFINET
controller and a PROFINET device at the same time (I-Device).
PROFIBUS version
The PROFIBUS version features an integrated IsoPROFIBUS
board, which offers two PROFIBUS DP interfaces for establishing PROFIdrive connections.
The free PCI slot can be used for the purpose of retrofitting an
optional MCI PN Communication Board. This means that the
PROFIBUS version can support both PROFIBUS and PROFINET
on the same PC.
Compatible panel fronts
5
SIMOTION P350-3 is a PC-based, motion control system. The
use of an industrial PC platform facilitates the running of the
SIMOTION machine application (comprising of PLC, motion
control and HMI functions) alongside standard PC applications
on one platform. This is particularly useful in the case of applications that involve complex PC-based data management and
analysis systems.
The operating system is Windows XP Professional, with a realtime expansion for SIMOTION.
To facilitate the connection of distributed components,
SIMOTION P350-3 is available in both PROFINET and
PROFIBUS versions.
Design
Interfaces
Display and diagnostics
With SIMOTION P, the display and diagnostics functions for the
operating states are performed by a software monitor, which
takes the form of an on-screen application window. This software
monitor can be operated using your keyboard, mouse or touch
panel.
Integrated interfaces
1 x COM 1 (V.24), VGA (via DVI adapter)
4 x USB 2.0
1 x MPI-/PROFIBUS DP interface
(integrated, not isochronous, isolated)
2 x Industrial Ethernet 10/100 Mbit/s (integrated)
Expansion slots
1 x PCI slot 265 mm
PROFINET version:
occupied by MCI-PN Communication Board
PROFIBUS version:
occupied by IsoPROFIBUS board
1 x PCI/ISA slot 170 mm (free)
e.g., for the purpose of retrofitting an additional Communication Board
5/10
SIMOTION P350-3 can be connected to the following panel

fronts:
12" with membrane-type keys
12" for touch screen operation
15" with membrane-type keys
15" for touch screen operation.
The DVI/VGA interface can be used to connect an external
monitor.
Expansion using distributed I/Os
PROFINET version
Distributed I/Os (SIMATIC ET 200S/M/pro)
Distributed drives (e.g. SINAMICS S120 Motor Modules with
CU320 Control Unit and CBE20 Communication Board plus
SINAMICS S120 Power Modules and CU310 PN Control Unit)
Engineering systems (PG/PC) or
HMI devices (e.g., MP, TP, OP).
PROFIBUS version
Certified PROFIBUS standard slaves (DP-V0, DP-V1, DP-V2)
Distributed I/Os (SIMATIC ET 200S/M/eco/pro)
Distributed drives (e.g. SINAMICS S120 Motor Modules with
CU320 Control Unit plus SINAMICS S120 Power Modules and
CU310 DP Control Unit)
Engineering systems (PG/PC) or
HMI devices (e.g., MP, TP, OP)
PC technology
Processor: Intel Pentium M 2 GHz
Microsoft Windows XP Professional operating system, English
512 MB SDRAM, upgradable to 1 GB
Hard disk with shock damping, approx. 40 GB
DVD-ROM drive (optional)
Data backup/restore using the Symantec Ghost data backup
software (pre-installed)
Siemens AG 2009

SIMOTION
Integration
SIMOTION P350-3
Input voltage
24 V DC
Max. power consumption
190 W
Max. mains buffering
20 ms
Degree of protection according

to EN 60529 (IEC 60529)
IP20
SINAMICS S120
Max. temperature change
10 K/h
SIMATIC ET 200
e. g. ET 200S
Relative humidity limit values

according to IEC 68-2-3,
IEC 68-2-30, IEC 68-2-56
SIMOTION
P350-3
PCI-Slot
MCI-PN Board
X21
(Port 1...4)
PROFINET cable
(PROFINET
version)
Programming
device PG
X4
X2
Iso
PROFIBUS
board
X102
PROFIBUS DP
PROFIBUS cable
SIMATIC ET 200
e. g. ET 200M
(PROFIBUS
version)
X101
PROFIBUS DP
PROFIBUS DP
drive e. g.
SINAMICS S120
PROFIBUS DP
drive e. g.
SINAMICS S120
Storage and transport
5 ... 95 % at +25 C
Operation
5 ... 80 % at +25 C
Humidity rating in accordance

with EN 60721-3-3
Class 3K5
Condensation and icing excluded
Low air temperature 0 C (32 F)
Permissible ambient temperature

-20 ... +60 C (-4 ... +140 F)
Operation
+5 ... +45 C (+41 ... +113 F)
Weight, approx.
6 kg (13.2 lb)
Dimensions (W x H x D)
297 mm x 267 mm x 85 mm
(11.69 in x 10.51 in x 3.35 in)
(excluding DVD drive)
297 mm x 267 mm x 106 mm
(11.69 in x 10.51 in x 4.17 in)
(including DVD drive)
Approvals
cULus (File No. E164110)
PROFIBUS cable
SIMATIC ET 200
e. g. ET 200M
Ethernet
Ethernet bus cable
More
standard PC
interfaces
included in standard
keyboard package
PG, HMI
Ordering data
Description
Standard PC
keyboard
Mouse
USB/RS 232
SITOP UPS
(optional)
G_PM10_EN_00023b
Overview of the SIMOTION P350-3 connections
More information
Order No.
SIMOTION P350-3,
PROFIBUS version
with Intel Pentium M, 2 GHz,
Windows XP Professional English,
512 MB SDRAM, 24 V DC,
with IsoPROFIBUS board
without DVD drive
6AU1350-3AK41-1BE2 -Z 1)
with DVD drive
6AU1350-3AK43-1BE2 -Z 1)
SIMOTION P350-3,
PROFINET version
with Intel Pentium M, 2 GHz,
Windows XP Professional, English,
512 MB SDRAM, 24 V DC,
with MCI PN board
For additional information about connectable I/O modules, refer

to Catalog PM 21 under "SIMOTION I/O components" and
"SIMOTION Overview of functions".
without DVD drive
6AU1350-3AK41-2BE2 -Z 1)
with DVD drive
6AU1350-3AK43-2BE2 -Z 1)
SIZER configuration tool
6ES7648-2AG20-0GA0
With the SIZER configuration tool, you can easily configure the
SINAMICS S120 drive family including SIMOTION. It provides
you with support for selecting and dimensioning the components required for a motion control task. You can also determine
the possible number of axes and the resulting load with SIZER in
accordance with your performance requirements.
6ES7648-2AG30-0GA0
6ES7648-2AG40-0GA0

(for PROFINET upgrade)
6AU1390-0BA00-0AA0
For further information about SIZER, refer to the section "System

description Dimensioning: SIZER configuration tool"..
Motherboard battery
For informationen on the SIMATIC Panel PC Remote Kit (for

separate design of control unit and computer unit) see cahpter
Industrial PC - Expansion components.
Memory expansion
Replacement parts
6FC5247-0AA18-0AA0
1) Note regarding runtime software

When ordering SIMOTION P350-3, the pre-installed runtime version
must be specified. Additional runtime software licenses can either be
pre-installed on a SIMOTION P350-3 or ordered separately.For further
information, refer to the section "Runtime software licensing" on page
8/41 and the following of catalog PM 21.
5/11
Siemens AG 2009

SIMOTION
PC-based
Overview
Current consumption
900 mA at 5 V

-20 ... +60 C (-4 ... +140 F)
Operation
+5 ... +55 C (+41 ... +131 F)
Weight, approx.
110 g (0.24 lb)
Dimensions
107 mm x 167 mm
(4.21 in x 6.57 in)
Approvals
Ordering data
Description
Order No.
MCI-PN communication board
6AU1390-0BA00-0AA0
Accessories
The MCI PN Communication Board for SIMOTION P350-3 enables connection to a PROFINET IO network. This means that in
terms of PROFINET, SIMOTION P350-3 is a PROFINET IO controller that offers the following functions:
Communication as: PROFINET IO Controller, I-Device (controller and device simultaneously)
100 Mbit/s full duplex
Supports real-time classes of PROFINET IO:
- RT (Real Time)
- IRT (Isochronous Real Time)
Integration of distributed I/O as PROFINET IO devices
Integration of drives as PROFINET IO devices through PROFIdrive according to the V4 specification
Support for standard Ethernet communication, e.g.
- for interfacing with SIMOTION SCOUT
- for the connection of HMI systems
- for communication with any other devices over TCP/IP or
UDP communication
Integrated 4-port switch with 4 RJ45 sockets based on the
PROFINET ASIC, ERTEC400. The optimal topology (line, star,
tree or ring) can therefore be constructed without the need for
additional external switches.
Design
The MCI-PN communication board is inserted in the spare PCI
slot of the SIMOTION P350-3.
The following PROFINET connectors and cables are recommended:

Description
Order No.
RJ45 FastConnect connector for

Industrial Ethernet/PROFINET
145 cable outlet
- 1 pack = 1 unit
- 1 pack =10 units
6GK1901-1BB30-0AA0
6GK1901-1BB30-0AB0
180 cable outlet

- 1 pack = 1 unit
- 1 pack =10 units
6GK1901-1BB10-2AA0
6GK1901-1BB10-2AB0
FastConnect cables for

Industrial Ethernet/PROFINET 1)
IE FC Standard Cable GP 2x2
6XV1840-2AH10
IE FC Flexible Cable GP 2x2
6XV1870-2B
IE FC Trailing Cable GP 2x2
6XV1870-2D
IE FC Trailing Cable 2x2
6XV1840-3AH10
IE FC Marine Cable 2x2
6XV1840-4AH10
Stripping tool for Industrial

Ethernet/PROFINET
FastConnect cables
IE FC stripping tool
6GK1901-1GA00
1) Sold by the meter; max. length 1000 m (3281 ft); minimum order 20 m
(65.62 ft).
More information
For further information about FastConnect cables, see Catalog
IK PI (Industrial Communication for Automation and Drives) or
the A&D Mall under "Communication/Networks/SIMATIC NET
communication systems/PROFINET/Passive network components".
5/12
Siemens AG 2009

SIMOTION
PC-based Panel fronts
Overview
Panel fronts
Degree of protection at the front
according to EN 60529
(IEC 60529)
IP65
Rel. humidity limit values according to IEC 68-2-3, IEC 68-2-30,

IEC 68-2-56
5 ... 95 % at +25 C (+77 F)
Operation
5 ... 80 % at +25 C (+77 F)
Condensation
Not permissible

-20 ... +60 C (-4 ... +140 F)
Operation
+5 ... +45 C (+41 ... +113 F)
Weight
12" panel front, membrane keys
6 kg (13.2 lb)
12" panel front, touch screen

operation
6 kg (13.2 lb)
6 kg (13.2 lb)

operation
6 kg (13.2 lb)
Dimensions (W x H x D)
Four different panel fronts with TFT color display are available for
the SIMOTION P350-3:
12 with membrane keyboard, resolution: 800 x 600 pixels
12 for touch screen operation, resolution: 800 x 600 pixels
15 with membrane keyboard, resolution: 1024 x 768 pixels
15 for touch screen operation, resolution: 1024 x 768 pixels
Design
The panel fronts are suitable for installation in consoles, control
cabinets and support arm systems.
The SIMOTION P350-3 is mounted directly behind the panel
front as standard. Four knurled-head screws are used to form a
mechanical interlock between the SIMOTION P350-3 and the
panel front. No special tool is needed for this.
It is also possible to distribute the SIMOTION panel fronts at
distances of up to 100 m. For the required components, refer to
Thin Client Unit (TCU).
483 mm x 310 mm x 100 mm

(19.02 in x 12.20 in x 3.94 in)

operation
400 mm x 310 mm x 125 mm

(15.75 in x 12.20 in x 4.92 in)
483 mm x 355 mm x 130 mm

(19.02 in x 13.98 in x 5.12 in)

operation
483 mm x 310 mm x 130 mm

(19.02 in x 12.20 in x 5.12 in)
Approvals
Ordering data
Description
Order No.
The following panel fronts can only

be used in combination with
SIMOTION P350-3.
SIMOTION P012K
(Key)
6AU1300-0DA00-0AA0
SIMOTION P012T
6AU1300-0CA00-0AA0
SIMOTION P015K
(Key)
6AU1300-0FA00-0AA0
SIMOTION P015T
6AU1300-0EA00-0AA0
Accessories
Description
Order No.
Sealing caps,
10 units, for USB port
6FC5248-0AF05-0AA0
Key labeling strips

(plastic) for
12", membrane keys (Key)
6AV7671-3CA00-0AA0
15", membrane keys (Key)
6AV7671-5CA00-0AA0
5/13
Siemens AG 2009

SINAMICS
The drive familiy
Overview
SINAMICS G
SINAMICS S
Metal forming
technology
Mixer/mills
Packaging
Extrusion
Pumps/fans/
compressors
Machine tools
Textiles
Woodworking
Conveyor systems
Printing and paper

machines
G_D211_EN_00137
Rolling mills
Applications of the SINAMICS drive family
Applications
Platform concept and Totally Integrated Automation
SINAMICS is the new family of Siemens drives designed for machine and plant engineering applications. SINAMICS offers solutions for all drive tasks:
7 Simple pump and fan applications in the process industry
7 Applied single drives in centrifuges, presses, extruders,
elevators, as well as conveyor and transport systems
7 Drive line-ups in textile, plastic film, and paper machines, as
well as in rolling mill plants
7 Highly dynamic servo drives for machine tools, as well as
packaging and printing machines
All SINAMICS versions are based on a platform concept. Common hardware and software components, as well as standardized tools for design, configuration and commissioning tasks,
ensure high-level integration across all components. SINAMICS
handles a wide variety of drive tasks without system gaps. The
different SINAMICS versions can be easily combined with each
other.
Versions
Depending on the application, the SINAMICS range offers the
ideal variant for any drive task within the SINAMICS family.
7 SINAMICS G is designed for standard applications with asynchronous (induction) motors. These applications have less
stringent requirements regarding the dynamics and accuracy
of the motor speed.
7 SINAMICS S handles complex drive tasks with synchronous
and asynchronous (induction) motors and fulfills stringent requirements regarding
- dynamics and accuracy,
- integration of extensive technological functions in the drive
control system.
5/14
SINAMICS is a part of the Siemens "Totally Integrated Automation" concept. Integrated SINAMICS systems covering configuration, data storage, and communication at automation level,
ensure low-maintenance solutions with the SIMOTION,
SINUMERIK and SIMATIC control systems.
Siemens AG 2009

SINAMICS
The drive familiy
SIMOTION
SINUMERIK
SIMATIC
SINAMICS
5
Asynchronous motors
(induction motors)
G_D211_EN_00202
Synchronous motors
SINAMICS as part of the Siemens modular automation system
Quality in accordance with EN ISO 9001

SINAMICS conforms to the most exacting quality requirements.
Comprehensive quality assurance measures in all development
and production processes ensure a consistently high level of
quality.
Of course, our quality assurance system is certified by an independent authority in accordance with EN ISO 9001.
Suitable for global use
SINAMICS meets the requirements of relevant international standards and regulations from the EN standards and IEC standards to UL and cULus regulations.
5/15
Siemens AG 2009

SINAMICS
The drive familiy
Low voltage
For high-quality applications
For basic
applications
SINAMICS
G110
SINAMICS
G120
V/f Control
Medium voltage
SINAMICS
G120D
For sophisticated applications
SINAMICS S120
SINAMICS G130
SINAMICS G150
V/f Control/ Vector Control/ Servo Control
V/f Control / Vector Control
0.12 kW ... 3 kW
Pumps, fans,
conveyor belts
0.37 kW ... 132 kW 0.75 kW ... 7.5 kW
75 kW ... 1500 kW
Pumps, fans, conveyor belts, compressors,

mixers, mills, extruders
SINAMICS S150
0.12 kW ... 4500 kW
Production machines, eg. packaging,

textile, printing and paper machines
plastic machines, machine tools,
plants and process lines
For high-power
applications
SINAMICS GM150
SINAMICS SM150
SINAMICS GL150
V/f Control/
Vector Control
75 kW ... 1200 kW
0.8 MW ... 120 MW
Test bay drives,

cross cutters,
centrifuges
Pumps, fans,
compressors, mixers,
extruders, rolling mills,
mining hoist drives
G_D011_EN_00164a
Tailored to the respective areas of application, SINAMICS is

divided into the following family members:
Low-voltage drives (line supply < 1000 V)
7 SINAMICS G110 the versatile drive for low power ranges
7 SINAMICS G120 the modular single drive for low to medium
power ranges
7 SINAMICS G120D the distributed single drive with high
degree of protection for design without control cabinet
7 SINAMICS G130 and SINAMICS G150 the universal drive
solution for high-power single drives
7 SINAMICS S120 the flexible, modular drive system for
complex tasks
7 SINAMICS S150 the sophisticated drive solution for highperformance single drives
Medium-voltage drives (line supply > 1000 V)
SINAMICS GM150 the universal drive solution for single
drives
7 SINAMICS SM150 the sophisticated drive solution for single
and multi-motor drives
7
5/16
The SINAMICS range is characterized by the following system

features:
uniform functionality based on a single platform concept
standardized engineering
high degree of flexibility and combination
wide power range
designed for global use
SINAMICS Safety Integrated
greater efficiency and effectivity
multiple communications options to higher-level controls
More information
For more information on the SIMOTION Motion Control system
and the SINAMICS S120 drive system see:
Catalogs IK PI, PM 21, NC 61, CA 01
Internet:
www.siemens.com/simotion
www.siemens.com/sinamics
Siemens AG 2009

SINAMICS
Overview
Modularity for mechanical engineering
SINAMICS S120 is designed to allow free combination of power
and control performance. Multi-axis drives with higher-level
motion control can be implemented with the SINAMICS S120
modular system as easily as single-drive solutions.
Greater flexibility with central control intelligence
On the SINAMICS S120, the drive intelligence is combined with
closed-loop control functions into Control Units.
These units are capable of controlling drives in Vector, Servo and
V/f modes. They also perform the speed and torque control functions plus other intelligent drive functions for all axes on the
drive..
Free performance selection for Vector and Servo control
modes
The use of a SINAMICS S120 Vector control is recommended for
drive solutions with continuous material webs, for example, wiredrawing machines, film and paper machines, as well as for hoisting gear, centrifuges and marine drives.
Servo control with SINAMICS S120 is employed for cyclic processes with precise, highly dynamic position control and servo
motors, e.g. in textile, packaging, printing machines and machine tools.
Flexibility for successful machine concepts

As part of the SINAMICS drive family, the SINAMICS S120
drive is a modular system for high-performance applications in
machine construction and plant engineering. SINAMICS S120
offers high-performance single-axis and multi-axis drives for a
very broad range of industrial applications. By virtue of its scalability and flexibility, SINAMICS S120 is the ideal system for
satisfying the ever increasing demand for more axes and better
performance. SINAMICS S120 supports flexible machine designs and faster implementation of customized drive solutions.
The response to ever increasing demands
Modern machines must be built at ever lower cost, but devliver
greater productivity. The SINAMICS S120 drive concept meets
both these challenges! It is easy to configure and thus helps to
reduce project completion times. Its excellent dynamic response and accuracy permit higher cycle rates for maximum
productivity.
Applications in machine and plant engineering
Regardless of whether the application involves continuous
material webs or cyclic, highly dynamic processes
SINAMICS S120 means increased machine performance in
many sectors:
Packaging machines
Plastics processing machines
Textile machines
Printing machines
Paper machines
Hoisting equipment
Handling and assembly systems
Machine tools
Rolling mills
Test stands
SINAMICS S120 functions for better efficiency

Basic functions: Speed control, torque control, positioning
functions
Intelligent starting functions for independent restart after
power supply interruption
BICO technology with interconnection of drive-related I/Os for
easy adaptation of the drive system to its operating environment
Integrated safety functions for realizing the implementation of
safety concepts
Regulated infeed/regenerative feedback functions for preventing undesirable reactions on the supply, allowing recovery of braking energy and ensuring greater stability against
line fluctuations
DRIVE-CLiQ the digital interface between all components
All SINAMICS S120 components, including the motors and encoders, are interconnected by a shared serial interface called
DRIVE-CLiQ. DRIVE-CLiQ forms the backplane for the complete
drive system. The standardized cables and connectors reduce
the variety of different parts and cut storage costs. Converter
boards (Sensor Modules) for converting standard encoder signals to DRIVE-CLiQ are available for third-party motors or retrofit
applications.
Swift and automatic: The electronic rating plate
An important digital linkage element of the SINAMICS S120
drive system are the electronic rating plates integrated in every
component. They allow all drive components to be detected automatically via a DRIVE-CLiQ link. As a result, data do not need
to be entered manually during commissioning or component replacement helping to ensure that drives are commissioned
quickly and successfully! The electronic rating plates of the motors contain, for example, the parameters of the electrical equivalent circuit diagram and the characteristic data of the built-in
motor encoder in addition to information such as order and identification numbers.
5/17
Siemens AG 2009

SINAMICS
Modular design ensures flexibility and scalability
The multi-axis design, also referred to as common DC bus, is
very modular with a power offering of Line Modules and Motor
Modules both available in booksize compact, booksize and
chassis formats. Line Modules function as the central energy
supply to the voltage-source DC link. Line Modules are optionally available with regulated infeed/regenerative feedback to
provide a constant DC link voltage. Motor Modules (DC/AC
units) supply the motors with energy from the DC link. All the
drive intelligence is organized into Control Units. The control
units perform all the closed-loop control functions for the drive
grouping. They also handle all other drive functions such as the
interconnection of drive related I/O's, positioning functions, etc.
and feature PROFIBUS DP or PROFINET as the central interface
for linking to higher level automation systems.
On single axis units, also referred to as AC drives, the rectifier

and inverter power section are contained in one device, the
Power Module available in blocksize and chassis formats. For
single axis applications, drive control functions are performed
by a single axis Control Unit (e.g. CU310) mounted on to the
Power Module. This separation of power and intelligence allows
for maximum flexibility and scalability. Integration into multi-axis
applications is easily accomplished by connecting a DRIVECLiQ link to a multi-axis Control Unit (e.g. CU320). This is accomplished by mounting a CU adapter (CUA31) on a block size
Power Module in place of the single axis Control Unit. Together
this integrated line offers the most optimal drive solution for any
application servo or vector.
Blocksize, booksize compact, booksize and chassis formats
All formats can be combined as required
PROFIBUS
The different SINAMICS S120 formats can be combined freely

thanks to their DRIVE-CLiQ interfaces, e.g. Line Modules in
chassis format can be freely combined with Motor Modules in
booksize format for multi-axis applications with high total output.
DRIVE-CLiQ
PROFINET
Digital and analog I/O

(Terminal Modules)
DRIVE-CLiQ
Central Control Module

(Control Unit)
Inverters
(Motor Modules)
Infeed (Line Module)
Control
Unit
G_D211_EN_00097
3 AC
SINAMICS S120
Chassis
SINAMICS S120
Booksize
G_D211_EN_00073
Motors
3 AC
5/18
DRIVE-CLiQ
Siemens AG 2009

SINAMICS
Control
(e. g. SIMATIC or SIMOTION)
+
PROFINET
SINAMICS S120
AC Drive
with CU310
SINAMICS S120
AC Drive
with CU310
G_D211_EN_00074a
230 V 1 AC
400 V 3 AC
DRIVE-CLiQ
230 V 1 AC
400 V 3 AC
SINAMICS S120 with

Motion Control system
SIMOTION D
for sophisticated Motion Control
tasks directly in the drive
SIMOTION D SINAMICS S120

G_D211_EN_00076
DRIVE-CLiQ
Motors
Control (e. g. SIMATIC or SIMOTION)
PROFIBUS
SINAMICS S120
CU320
PROFIBUS
SINAMICS S120
for positioning tasks
and speed control
Totally Integrated Automation the unique automation

platform
With Totally Integrated Automation (TIA), Siemens is the only single-source provider to offer an integrated spectrum of products
and systems for all sectors. Tailored to meet individual customer
requirements, sector-specific automation solutions can be implemented efficiently on the basis of TIA. Lower life-cycle costs
for plant operation and a significant reduction in the time to market result in a marked improvement in productivity and greater
investment security.
Easy Totally Integrated Automation with SINAMICS S120
DRIVE-CLiQ
SINAMICS S120
AC Drive
Apart from SIMATIC, SIMOTION and SINUMERIK, SINAMICS is

also one of the core components of TIA. The STARTER commissioning tool is therefore an integral element of the TIA platform.
It is thus possible to parameterize, program and commission all
components in the automation system using a standardized engineering platform and without any gaps. The system-wide data
management functions ensure consistent data and simplify archiving of the entire plant project.
PROFIBUS the No. 1 fieldbus
PROFIBUS DP, the standard fieldbus of the TIA system, is supported by all SINAMICS S120 variants. It provides a high-performance, system-wide communication network which links all automation components: HMI, controls, drives and I/O devices.
DRIVE-CLiQ
G_D211_EN_00075a
Motors
SINAMICS S120 and SIMOTION the perfect team

Modern machines must be capable of handling ever more complex Motion Control tasks and perform them with increasing accuracy and speed. In regards to this requirement, the SIMOTION
Motion Control System and high-performance SINAMICS S120
drive system form a perfect team. The SIMOTION D variant,
which is physically integrated in the SINAMICS S120 drive, is the
ideal solution for machines with a large number of axes and
stringent precision requirements. This distributed automation
structure allows the machine to be segmented into various
axis groupings, with each grouping controlled by a separate
SIMOTION Motion Control System. The SIMOTION systems
communicate either via PROFIBUS DP or PROFINET. Another
important aspect: The compact machine design thanks to the
distributed automation structure and a Control Unit directly in the
drive.
PROFINET for enhanced performance and open IT

communication
SINAMICS S120 is also available with a PROFINET interface.
This Ethernet-based bus enables control data to be exchanged
at high speed via PROFINET IO with IRT or RT and makes
SINAMICS S120 a suitable choice for integration in top-performance multi-axis applications.
At the same time, PROFINET also uses standard IT mechanisms
(TCP/IP) to transport information, e.g. operating and diagnostic
data, to higher-level systems. A SINAMICS S120 with this interface can thus easily be integrated into factory IT networks.
5/19
Siemens AG 2009

SINAMICS
SINAMICS S120 drive system
Line-side components
Line Modules
Line reactors
Basic Line Modules
Line filters
Smart Line
Modules
Active Interface
Modules
Active Line
Modules
Power supply
DC link components
For applicable 24 V device,
Braking Module
see Catalog KT 10.1
Breaking resistors
Capacitor Module
Control Supply Module
Control Units
CU310
CU320
Control Units SIMOTION

D410
D425
D435
D445
Motor Modules
Single Motor
Modules
Double Motor
Modules
CX32
Sensor Modules
Terminal Modules
DRIVE-CLiQ Hub
Power Modules
Motor reactors
Sinusodial filters
AC motors
Synchronous motors
1FT6 motors
1FK7 motors
1FS6 motors
1FW3 torque motors
Gear units
Geared motors
Linear motors
Load-side components
Connection system
Asynchronous motors
1PH7 motors
1PL6 motors
1PH4 motors
MOTION-CONNECT
Power cables
Signal cables
G_D211_EN_00077
The components of the SINAMICS S120 drive system
5/20
Siemens AG 2009
Visualization
6/2
Introduction
6/5
6/5
6/8

SIMATIC WinCC flexible RT
SIMATIC WinCC flexible RT options
6/10
6/10
6/14
SIMATIC WinCC
SIMATIC WinCC
WinCC options
Siemens AG 2009
Visualization
Introduction
Overview
With the SIMATIC WinCC flexible and SIMATIC WinCC product
families, SIMATIC HMI offers visualization and configuration software for the complete scope of applications:
covers applications directly at the machine ranging from
PC-based HMI solutions for single-user systems based on
WinCC flexible Runtime through to the SIMATIC HMI operator
panels. For configuration the WinCC flexible Runtime for PCs
as well as SIMATIC HMI devices, the WinCC flexible family
also offers the integrated and scalable configuration tools
WinCC flexible Micro, WinCC flexible Compact, WinCC
flexible Standard and WinCC flexible Advanced.
SIMATIC WinCC
is the process visualization or SCADA system (PC-based
HMI system) for visualizing and controlling processes, production flows, machines and plants in all sectors from the
simple single-user system through to the distributed multi-user
system with redundant servers and remote solutions with Web
clients. WinCC is, at the same time, the information hub for
company-wide vertical integration (process visualization and
platform for IT and business integration).

is the consistent further development of the SIMATIC HMI
software products. WinCC flexible offers an essential hub for
applications close to the machine (until now this has been
covered by the ProTool family) with respect to configuration
efficiency and new automation concepts. For process-oriented
plant and mechanical engineering as well as series production
of machines, SIMATIC WinCC flexible also offers:
Further productivity improvements (configuration efficiency)
when creating HMI projects
Implementation of innovative TCP/IP and web-based automation and HMI concepts
Increase of the availability of the machines and systems
through new service concepts
Safe, flexible and world-wide access to process data
Configuration of SIMATIC HMI devices
WinCC RC
WinCC flexible Advanced
Engineering Software
WinCC flexible Compact
WinCC flexible
6/2
SIMATIC Micro Panel

TP177micro
OP73micro
SIMATIC Panels
70/170 series
SIMATIC Panels
and Multi Panels
170/270/370
series
PC based
WinCC flexible
Runtime
PC based
WinCC
Runtime
G_ST80_XX_00080
Runtime Software
Micro
Siemens AG 2009
Visualization
Introduction
Changing from the ProTool family to WinCC flexible is possible
by simply using the same or converting the old configuration
data.
SIMATIC WinCC will remain the process visualization system for
plant monitoring with single or multiple station solutions and the
platform for IT & Business integration under Windows 2000, XP
Professional and Windows Vista.
The next step will be to use WinCC flexible also as the platform
for integrating the SIMATIC WinCC visualization system. As is the
case today for ProTool V6 projects, WinCC V6 projects will then
also be compatible.
SIMATIC WinCC flexible ES engineering software
Newly developed family of configuration systems with WinCC
flexible Micro/Compact/Standard/Advanced for SIMATIC
operator panels, the HMI part of SIMATIC C7 as well as for the
PC-based visualization software WinCC flexible RT
- SIMATIC Micro Panels
- SIMATIC Basic Panels
- SIMATIC Mobile Panels
- SIMATIC Panels of the 70/170/270 series as well as C7-635
and C7-636
- SIMATIC Multi Panels of the 170/270/370 series
- SIMATIC WinCC flexible RT
Executable under Windows XP Professional/VISTA Business,
Ultimate
Expanded integration into Totally Integrated Automation (TIA):
STEP 7, SIMOTION
Maximum configuration efficiency thanks to preconfigured
objects, modular system, intelligent tools and mass data
processing
Optionally expandable with functions for version administration and logging changes (WinCC flexible/ChangeControl)
SIMATIC WinCC flexible Runtime visualization software
Modular PC-based HMI solution for single-user systems
directly at the machine (further development of ProTool/
Pro RT)
Executable under Windows XP Professional/VISTA Business,
Ultimate
Basic package providing a cost-effective means of getting
started in respect of visualization, signaling and logging. can
be expanded specifically with option packages
Flexible expansion possible with VB scripts and customized
ActiveX controls created with OPP (Open Platform Program)
Can be integrated into innovative automation solutions based
on TCP/IP networks
Expanded service concepts with remote operation, diagnostics and administration over the intranet and Internet as well as
e-mail communication (using options)
Can be expanded with WinCC flexible/Audit for recording operations in an audit trail
Central, system-wide user management based on the
SIMATIC Logon option
SIMATIC WinCC process visualization system

PC-based operator control and monitoring system for visualizing and operating processes, production flows, machines and
plants in all sectors - with the simple single-user station
through to distributed multi-user systems with redundant
servers and cross-location solutions with Web clients. WinCC
is the information hub for company-wide vertical integration
(process visualization and platform for IT & business integration).
For universal use thanks to solutions for all sectors, e.g.
conforming to FDA 21 CFR Part 11, and multiple languages for
worldwide use
All HMI functions on-board with industry-standard functions
for signaling and acknowledging events, archiving of
messages and measured values, logging of all process and
configuration data, user administration and visualization
(WinCC basic software).
Configuring is easy and efficient using object libraries, modular systems, tools for mass data processing and online loading
of changes
Company-wide, flexible client/server structures with operator
stations on the Web, distributed servers and data integrity
thanks to redundancy
Easy to integrate over standard interfaces such as OPC (OLE
for Process Control), WinCC OLE-DB, VBA (Visual Basic for
Applications), VB script, C-API (ODK)
Integration platform in the company thanks to the Historian
functionality integrated into WinCC based on the Microsoft
SQL Server 2005, standard and programming interfaces and
tools and clients for evaluation
Modular expansion with options and add-ons as well as individual function expansions with VB Script, Visual Basic for
Applications, C-API (ODK) and integration of ActiveX
elements
Increases productivity, minimizes engineering outlay, reduces
lifecycle costs
6/3
Siemens AG 2009
Visualization
Introduction
SIMATIC WinCC flexible Runtime
SIMATIC WinCC
Area of application
HMI software designed primarily for use in

in-process applications in (series) machine
production
Process visualization software for controlling and

monitoring both simple and complex automation
solutions
Configurations
Single-user system, usually based on a panel PC
Single- and multi-user system as well as distributed systems
Support of simple distributed operating stations in Internet capability using the

TCP/IP networks
WinCC/Web Navigator option
Innovative service concepts featuring e-mail,
remote control, monitoring and administration via
intranet/Internet
Data integrity with redundant solutions
Integrated Historian functionality

Processing of high quantity frameworks
Strategies
Integrated solution system taking in both operator

panels and PC-based operator stations running
WinCC flexible Runtime
High-quality SCADA functionality and integration

platform for ERP/MES solutions based on the
integrated Historian functionality (IT & business
integration)
Configuring
An integrated family of configuration tools for

integrated solutions
Flexibility thanks to individual dynamization

option
Fast configuration due to preconfigured objects

and referenced image blocks
Object library and function block technology

(incl. referencing)
Table-based editors for efficient mass data

processing
Efficient configuration of mass data thanks to

configuration tool
Intelligent tools to simplify the configuration of

complex tasks, e.g., user guidance, automatic
compilation
Simple configuration of control system

applications, text library for signaling system
Online loading of changes in active projects
Functional scope
HMI basic functionality can be expanded using

option packages
High-performance and comprehensive SCADA

functionality
Standard functions can be expanded quickly

and easily using VB scripts
Standard functions can be expanded quickly and

easily using VB scripts and C scripts
Integral component of the PCS 7 process control
system
Openness/expansion capability
Custom made solutions based on ActiveX controls Can be expanded with open Windows interfaces
are possible (Open Platform Program)
for integration into a factory-/company-wide
information system
Access to runtime display objects using VB scripts Standard SQL database with WinCC OLE DB
Provider
C-APIs (ODK), access to the COM object model of
WinCC RT using VB script and WinCC CS using
VBA
OPC: Access to WinCC RT data using OPC DA,
OPC HDA and OPC A&E (connectivity pack)
Extensive range of options and add-ons
SIMATIC ProAgent process diagnostics software

Process diagnostics software for fast, targeted fault diagnosis
in plants and machines for SIMATIC S7 and SIMATIC HMI
A standardized diagnostics concept for various SIMATIC
components:
Optimized interaction between STEP 7 engineering tools and
SIMATIC HMI
Standardized user interface
Increases productivity, minimizes engineering outlay, reduces
lifecycle costs
6/4
ProAgent
- provides optimum support for plant and machine personnel
in respect of troubleshooting and fault rectification
- increases plant availability
- reduces downtimes
No further configuration overhead for diagnostics functionality
Frees up PLC capacity with regard to memory and program
execution time
No special operator know-how is required thanks to clearly
comprehensible indication of the cause of error
Siemens AG 2009
Visualization
Overview
Benefits
Optimum price/performance ratio thanks to individually
scalable system functionality
Functions for all visualization tasks:
Operator functions, graphical and trend displays, signaling
system, log system, archiving (option), recipe management
(option), Audit Trail (option), process fault diagnostics (option)
Flexible runtime functionality thanks to Visual Basic scripts
Innovative service concepts with remote operation, diagnostics and administration via intranet and Internet as well as
e-mail communication to increase availability (option)
Support for simple distributed automation solutions based on
TCP/IP networks at the machine level (option)
PC-based visualization software for single-user systems

directly at the machine
- Runs under Windows XP Professional and Windows Vista
Business/Ultimate
- Current version: SIMATIC WinCC flexible 2008 Runtime
with 128, 512, 2 048 or 4 096 PowerTags.
SIMATIC WinCC flexible Runtime is configured with the
SIMATIC WinCC flexible Advanced configuration software.
6/5
Siemens AG 2009
Visualization
Ordering data
Advanced
Order No.
Z
6AV6 613-0AA51-3CA5
SIMATIC ProTool/Pro RT to
Runtime
Floating License, on DVD incl.

license key, includes:
Engineering software for configuring WinCC flexible Runtime on basic PCs/Panel PCs as well as
Micro Panels, Basic Panels and
70/170/270/370 series Panels incl.
C7-635/636
SW for WinCC flexible/ChangeControl engineering option 1)
Simulation softwarefor WinCC
flexible Runtime as well as Micro
Panels, Basic Panels and
70/170/270/370 series Panels
incl. C7-635/636
Native drivers
Electronic documentation (.pdf)
in German, English, French,
Italian, Spanish, simplified
Chinese, traditional Chinese,
Korean, Japanese
WinCC flexible /ChangeControl Z
for WinCC flexible 2008 Compact/Standard/Advanced 1)3)
6AV6 613-6AA01-3AB5
ProTool/Pro Runtime
128 PowerTags to
128 PowerTags2)
6AV6 613-3BB51-3CE0
ProTool/Pro Runtime
256 PowerTags to
512 PowerTags2)
6AV6 613-3CD51-3CE0
ProTool/Pro Runtime
512 PowerTags to
512 PowerTags2)
6AV6 613-3DD51-3CE0
ProTool/Pro Runtime
2 048 PowerTags to
2 048 PowerTags2)
6AV6 613-3FF51-3CE0
6AV6 613-1XA51-3CE0
6AV6 618-7XX01-3AF0

2004/2005/2007 Runtime to
Runtime
Upgrade to SIMATIC WinCC
flexible Runtime 2008
PowerTags incl. Runtime
Options for:
Floating License, option,

license key only
Order No.
Upgrades

Runtime
- WinCC flexible /Sm@rtAccess

- WinCC flexible /Sm@rtService
fr PC-Systeme; inkl. SW der

Optionen fr PC-Systeme1)
Single License, auf CD-ROM
inkl. Lizensierung, fr:
- WinCC flexible /OPC server

- WinCC flexible /Archives
- WinCC flexible /Recipes
128 PowerTags (RT 128)
6AV6 613-1BA51-3CA0
6AV6 613-1DA51-3CA0
2 048 PowerTags (RT 2 048)
6AV6 613-1FA51-3CA0
4 096 PowerTags (RT 4 096)
6AV6 613-1GA51-3CA0
128 to 512 PowerTags
6AV6 613-4BD01-3AD0
128 to 2 048 PowerTags
6AV6 613-4BF01-3AD0
6AV6 613-4DF01-3AD0
Upgrade of the SIMATIC WinCC Z

flexible Panel options:
- WinCC flexible /Sm@rtAccess
for SIMATIC Panel
- WinCC flexible /Sm@rtService
for SIMATIC Panel
- WinCC flexible /OPC server
for SIMATIC Multi Panel
- WinCC flexible /ProAgent
for SIMATIC Multi Panel
- WinCC flexible /Audit
for SIMATIC Panel
6AV6 613-4BG01-3AD0
Documentation (has to be ordered separately)
6AV6 613-4DG01-3AD0
2 048 to 4 096 PowerTags
6AV6 613-4FG01-3AD0
User Manual
Power packs
Runtime
Single license, only license key
for PowerTags, from
1) Runtime licenses for WinCC flexible Runtime options must be purchased separately for each target system.
2) Each including a single license WinCC flexible /Archives and
WinCC flexible /Recipes.
- WinCC flexible /ProAgent

- WinCC flexible /Audit
German
6AV6 691-1BA01-3AA0
English
6AV6 691-1BA01-3AB0
French
6AV6 691-1BA01-3AC0
Italian
6AV6 691-1BA01-3AD0
Spanish
6AV6 691-1BA01-3AE0
User Manual
German
6AV6 691-1CA01-3AA0
English
6AV6 691-1CA01-3AB0
French
6AV6 691-1CA01-3AC0
Italian
6AV6 691-1CA01-3AD0
Spanish
6AV6 691-1CA01-3AE0
6/6
Siemens AG 2009
Visualization
Ordering data
Order No.
Order No.
Documentation (has to be ordered separately) (continued)
Communication via PROFIBUS (continued)
S7-5613 Edition 2008
6AV6 691-1SA01-0AX0
DVD
German, Italian, Spanish);
user manuals, manuals and communication manuals for SIMATIC
HMI
Communication via Industrial Ethernet
CP 1613-A2
6GK1 161-3AA01
PCI card (32 bit) for connecting a

PG/PC to Industrial Ethernet
(communications software must
be ordered separately)
Software for S7 and open communication, incl. PG/OP communication, OPC server and NCM PC; up
to 120 connections, runtime software, software and electronic
manual on CD-ROM, license key
on a USB stick, Class A, for 32-bit
Windows XP Professional SP 2, 3;
Windows 2003 Server R2, SP2;
Windows Vista Business/Ultimate
SP1; Windows 2008 server; for
CP 1613/CP 1613 A2/CP 1623;
German/English
6GK1 716-1CB71-3AA0
Software Update Service for one

year, with automatic extension;
requirement: Current software
version
6GK1 716-1CB00-3AL0
Upgrade S7-1613 from Edition Z

2006 to S7-1613 Edition 2007
6GK1 716-1CB00-3AE0
Upgrade S7-1613 from V6.0,

V6.1, V6.2 or V6.3 to S7-1613
Edition 2007
6GK1 716-1CB00-3AE1
6GK1 713-5CB71-3AA0
Software Update Service for one

version
6GK1 713-5CB00-3AL0

2006 to S7-5613 Edition 2007
6GK1 713-5CB00-3AE0

V6.1, V6.2 or V6.3 to S7-5613
Edition 2007
6GK1 713-5CB00-3AE1
6GK1 551-2AA00
PCMCIA card (32-bit CARDBUS)

for connecting a PG/Notebook to
PROFIBUS or MPI (communications software included in WinCC
flexible).
6GK1 561-1AA01
PCI card (32-bit) for connecting a

PG/PC to PROFIBUS (communications software included in
WinCC flexible basic package)

PC to PROFIBUS (communications software must be ordered
separately).
PC to PROFIBUS (communications software must be ordered
separately).
6GK1 561-1AM01
6GK1 562-1AA00
PCI Express X1 card (32-bit) for

connecting a PG/PC to PROFIBUS or MPI (communication software included in WinCC flexible
basic package)
PC/PPI adapter
6GK1 561-4AA01
Comprising CP 5611 A2 (32-bit)

and MPI cable, 5 m
CP 5621
6GK1 561-3AA01
CP 5611-A2
CP 5611 MPI
Communication via PROFIBUS
CP 5614-A2
Single license for 1 installation Z
CP 5512
CP 5613-A2
Software for S7 communication,

incl. PG and FDL protocol, OPC
server and NCM PC; runtime
manual on a USB stick, license
key on diskette, Class A, for 32-bit
Windows XP Professional SP 2, 3;
SP1; Windows 2008 Server; for
CP 5613, CP 5613 A2, CP 5613
FO, CP 5614, CP 5614 A2;
German/English
6ES7 901-3CB30-0XA0
RS 232, 9-pin; male with

RS 232/PPI converter,
max. 19.2 kbit/s
PC/MPI adapter
6ES7 972-0CA23-0XA0

RS 232/MPI converter
PC adapter USB
6ES7 972-0CB20-0XA0
For use with Windows 2000/XP

A)
B)
E)
Z)
Subject to export regulations: AL: N and ECCN: EAR99H

6/7
Siemens AG 2009
Visualization
Overview
SIMATIC WinCC flexible /SIMATIC Logon
C
WinCxible
fle ption
RT o
C
WinCxible
fle ption
ES o
C
WinCxible
fle ic SW
Bas S/RT
E
C
WinCxible
fle ption
RT o
C
WinCxible
fle ption
RT o
C
WinCxible
fle ption
ES o
G_ST80_XX_00085
C
WinCxible
fle ption
ES o
Options for SIMATIC Panels/Multi Panels and SIMATIC

SIMATIC WinCC flexible /Archives

Option for SIMATIC WinCC flexible Runtime for archiving
process values and messages
Archiving of process values and messages supports the
acquisition and processing of process data from an industrial
plant or machine. Evaluation of the archived process data provides information about the operating states of the plant or
machine.
One license is required for each operator station
(a license is not required for Simatic Panels/Multi Panels)
SIMATIC WinCC flexible /Recipes
Option for SIMATIC WinCC flexible Runtime for managing data
records in recipes that contain related machine or production
data
The data in a data set can be transferred, for example, from
the control unit to the PLC to switch production to a different
product variant
One license is required for each operator station
(a license is not required for Simatic Panels/Multi Panels)
Option for SIMATIC WinCC flexible Runtime as well as SIMATIC Panels for recording operations in an audit trail, and
electronic signature
A convenient configuration process, which is included as
standard in WinCC flexible 2005, is used to define the following:
- Which user actions should be recorded in the audit trail
during runtime
- Which important operator actions during execution time
require electronic signature/commentary
The audit option combined with the WinCC flexible ES
ChangeControl option supports the user with plant validation
Available for the following SIMATIC HMI systems:
- TP/OP270, TP/OP277
- MP270B, MP277
- MP370, MP 377
- WinCC flexible Runtime
A license is required for every operator station
(Panel and PC Runtime)
6/8
Option for connecting PCs with SIMATIC WinCC flexible Runtime

and SIMATIC Panels to central user administration.
Creates user administration on a central computer to which
one or more WinCC flexible stations can be connected over
Ethernet.
With each logging-on/off of a user on one of the connected
stations, SIMATIC Logon checks whether a user password has
been created and that the required privileges exist.
SIMATIC Logon for WinCC flexible supports the user in combination with the /Audit and /ChangeControl options in meeting requirements in accordance with FDA 21 CFR Part 11 and
EU178.
- Mobile Panel 177, Mobile Panel 277
- TP/OP 177B PN/DP
- TP/OP 277
- MP 177, MP 277, MP 377
Licensing:
SIMATIC Logon (basic license) and SIMATIC Logon Remote
Access (3-pack license) for connection of 3 WinCC flexible
stations to the central user administration. Additional stations
can be connected by using further SIMATIC Logon Remote
Access licenses (3-pack/10-pack).
SIMATIC WinCC flexible /Sm@rtAccess
Option for SIMATIC WinCC flexible Runtime plus SIMATIC
Panels for communication between various SIMATIC HMI
systems.
- Mobile Panel 177 PN, Mobile Panel 277
- TP/OP 177B PN/DP
- TP/OP 270, TP/OP 277
- MP 177, MP 270B, MP 277, MP 370, MP 377
Communication between HMI systems is established on the
basis of Ethernet networks, or via the intranet/Internet:
- Read and write access to variables; WinCC flexible Runtime
or SIMATIC Panels make data (variables) available to other
SIMATIC HMI systems or Office applications.
- A SIMATIC HMI system can be used to control or monitor another system remotely; entry level for client/server configurations for distributed operator stations or for solutions with
headend or control room.
Local operation, visualization and data processing is as possible as plant-wide access to information or central archiving
of process data. Integrated information flows ensure an overview of the status of all processes.
One license is required for each operator station.
SIMATIC WinCC flexible /Sm@rtService
Option for SIMATIC WinCC flexible Runtime and SIMATIC Panels
for remote maintenance and servicing of machines/plant via the
Internet/intranet.
Event-driven sending of e-mails
System diagnostics visualized via device-specific html pages
Siemens AG 2009
Visualization
Ordering data (continued)
SIMATIC WinCC flexible /Sm@rtService

- Mobile Panel 177 PN, Mobile Panel 277
- TP/OP 177B PN/DP
- TP/OP 270, TP/OP 277
- MP 177, MP 270B, MP 277, MP 370, MP 377
SIMATIC WinCC flexible /OPC Server
Option for SIMATIC WinCC flexible Runtime as well as Multi
Panels for communication with applications from different vendors (e.g. MES, ERP, or applications in the office sector).
- MP 270B, MP 277, MP 370, MP 377 (use of OPC on XML
basis)
- WinCC flexible Runtime (use of OPC based on DCOM)
SIMATIC WinCC flexible /ProAgent
Precise and rapid process fault diagnostics in plant and
machines for SIMATIC S7 and SIMATIC HMI
Standardized diagnostics concept for various SIMATIC
components
No further configuration overhead for diagnostics functionality
Frees up PLC capacity with regard to memory and program
execution time
- Mobile Panel 277
- TP/OP 270, TP/OP 277
- MP 270B, MP 277, MP 370, MP 377
Note:
For more information see catalogs ST 80 or CA01.
Ordering data
Order No.
Z
WinCC flexible /Archives for
WinCC flexible 2008 Runtime 1)
Single License, license key only
6AV6 618-7ED01-3AB0
Z
WinCC flexible /Archives+
Recipes for WinCC flexible 2008
1)
Runtime
Single License for each option,
license key only
6AV6 618-7GD01-3AB0
Z
WinCC flexible /Recipes for
WinCC flexible 2008 Runtime 1)
6AV6 618-7FD01-3AB0
Z
WinCC flexible /Archives+
Recipes for WinCC flexible 2008
1)
Runtime
Single License for each option,
license key only
6AV6 618-7GD01-3AB0
WinCC flexible /Audit for

SIMATIC Panel
Single License license key only
6AV6 618-7HB01-3AB0
WinCC flexible /Audit for

6AV6 618-7HD01-3AB0
SIMATIC Logon V1.4.1
Order No.
6ES7 658-7BX41-2YA0
Basic license; single license for 1

installation, 7 languages (German,
English, Spanish, Italian, Chinese,
Japanese); type of delivery:
License Key Disk, Certificate of
License, Terms and Conditions
SIMATIC Logon Remote Access
for WinCC flexible (3 Clients)
Remote access for 3 WinCC flexible
2008 clients; single license for 1
installation; type of delivery:
6ES7 658-7BA00-2YB0
SIMATIC Logon Remote Access

for WinCC flexible (10 Clients)
Remote access for 10 WinCC flexible 2008 clients; single license for 1
installation; type of delivery:
6ES7 658-7BB00-2YB0
WinCC flexible /Sm@rtAccess Z

for SIMATIC Panel 1)
6AV6 618-7AB01-3AB0
WinCC flexible /Sm@rtAccess B

for WinCC flexible 2008
Runtime 1)
6AV6 618-7AD01-3AB0
WinCC flexible /Sm@rtService Z

for SIMATIC Panels 1)
6AV6 618-7BB01-3AB0
WinCC flexible/Sm@rtService Z
for WinCC flexible 2008
Runtime1)
6AV6 618-7BD01-3AB0
WinCC flexible /OPC-Server for Z

SIMATIC Multi Panels 1)
6AV6 618-7CC01-3AB0
WinCC flexible /OPC-Server for Z

WinCC flexible 2008 Runtime1)
6AV6 618-7CD01-3AB0

Software option package for process diagnostics based on S7PDIAG V5.3 and higher, S7-HighGraph V5.3 and higher;S7-GRAPH
V5.3 and higher; functional
enhancement for SIMATIC WinCC
flexible;electronic documentation in
English, French, German, Italian
and Spanish
WinCC flexible /ProAgent for Z
SIMATIC Panels 1)
Runtime license (Single
License) executable on:
TP/OP 270, Mobile Panel 277,
TP/OP 277, MP 270B, MP277,
and MP 377
6AV6 618-7DB01-3AB0
WinCC flexible /ProAgent for Z

WinCC flexible 2008 Runtime1)
Runtime license (Single License)
6AV6 618-7DD01-3AB0
Single License license key only
1) One license is required for each operator station.

A license is not required for the engineering system for configuring
the runtime option.

Electronic documentation, on DVD
contains: all currently available user
manuals, manuals and communication manuals for SIMATIC HMI
6AV6 691-1SA01-0AX0
6/9
Siemens AG 2009
Visualization
SIMATIC WinCC
SIMATIC WinCC
Overview
Benefits
PC-based operator control and monitoring system for visualizing and operating processes, production flows, machines
and plants in all sectors - from the simple single-user station
through to distributed multi-user systems with redundant servers and cross-location solutions with Web clients. WinCC is
the information hub for corporation-wide vertical integration.
The basic system configuration (WinCC basic software) includes industry-standard functions for signaling and acknowledging events, archiving of messages and measured values,
logging of all process and configuration data, user administration and visualization.
The WinCC basic software forms the core of a wide range of
different applications. Based on the open programming interfaces, a wide range of WinCC options (from Siemens Industry
Automation) and WinCC add-ons have been developed (by
Siemens-internal and external partners).
WinCC can be operated with every PC that meets the given
HW requirements. The product range of the SIMATIC Panel PC
and SIMATIC Rack PC is available in particular for the industrial usage of WinCC systems. SIMATIC PCs stand out due to
their powerful PC technology, are designed for round-theclock operation, and can be operated in both harsh industrial
environments and office areas.
Current versions:
SIMATIC WinCC V7.0:
Executable with
- Windows VISTA 32-bit Ultimate, Business and Enterprise
- Windows XP Professional
- Windows 2003 Server and Windows 2003 Server R2
Contains the Microsoft SQL Server 2005 SP2
SIMATIC WinCC V6.2 SP2:
Executable with
- Windows XP Professional
- Windows 2000 Professional
- Windows Server 2003 and Windows Server 2003 R2
Contains the Microsoft SQL Server 2005 SP1
6/10
All-purpose
- Solutions for all sectors
- Multilingual for worldwide usage
- Can be integrated into all automation solutions
All HMI functions on board
- User administration
- Operator control and monitoring
- Reporting, acknowledging, and archiving of events
- Acquisition, compression and archiving of measured values
(incl. long-term backup)
- Logging and documenting of process and configuration
data
Can be configured simply and efficiently
- Configuration wizards let the user focus on the essentials
- In the picture by means of cross-reference lists and screen
property displays
- Configuration of multilingual applications
- Configuring tool for configuring bulk data
Universally scalable
- Expandable from single station to client-server configurations
- Increased availability by means of redundant servers
- Process visualization via the web with the WinCC
WebNavigator
Open standards for simple integration
- Efficient real-time database MS SQL Server 2005
- Open for application modules with ActiveX controls
- Visual Basic for Applications for individual expansions
- OPC for cross-vendor communication
Process visualization with Plant Intelligence
- Integrated high-performance Historian on the basis of the
Microsoft SQL Server 2005
- Integrated evaluation functions for the online analysis
(statistical process control)
- Production optimization with the help of diverse options
Expandable using options and add-ons
- Options for scalable configurations
- Options for increasing the availability
- Options for IT & business integration
- Options for SCADA expansions
- Options for validation in accordance with FDA 21 CFR
Part 11
Part of Totally Integrated Automation
- Direct access to the tag and message configuration of the
SIMATIC control system
- Integrated diagnostic functions for increasing productivity
Siemens AG 2009
Visualization
SIMATIC WinCC
SIMATIC WinCC
Innovations of V7.0
Innovated runtime user interface
New graphical options such as transparency, color gradients,
shades, and much more
Central management of switching between graphic designs
Central management of switching between color palettes
New graphical objects: combo boxes, list boxes, text fields
with multiple lines, multimedia control and much more
Ordering data
Order No.
SIMATIC WinCC system software V7.0

Runtime packages on DVD
Language/script versions:
DE/EN/FR/IT/ES; with license for
6AV6 381-2BC07-0AX0
6AV6 381-2BD07-0AX0
2 048 PowerTags (RT 2048)
6AV6 381-2BE07-0AX0
6AV6 381-2BH07-0AX0
New, revised runtime controls

An unlimited number of alarms can be displayed in Alarm
Control
User-specific filter options in Alarm Control
Identical, expanded layout for messages, trend curves, tables
and UserArchive Control
6AV6 381-2BF07-0AX0
102 400 PowerTags (RT 102400)
6AV6 381-2BJ07-0AX0
153 600 PowerTags (RT 153600)
6AV6 381-2BK07-0AX0
262 144 PowerTags (RT 262144)
6AV6 381-2BL07-0AX0
New, centrally modifiable graphic objects/faceplates

New, easy to configure faceplates with the option of centralized modification.
Can be used and configured on a cross-project basis in the
Graphics Designer
Complete packages on DVD
Additional configuration options

Can run as service and is thus suitable for use in existing IT
server environments.
The standard client without Microsoft SQL Server installation
reduces the installation costs and the hardware requirements
Revised and simplified WinCC setup with one-click installation
option
Improved support for multi-language projects
New, central editor for importing and exporting all WinCC texts
New filter mechanisms in the text library for simplified
management of texts
SIMATIC WinCC V7.0 Powerpacks
6AV6 371-2BD07-0AX0
SIMATIC Logon centralized user administration
6AV6 371-2BE07-0AX0
(included in the scope of supply)
6AV6 371-2BK07-0AX0
... and more
6AV6 371-2BF07-0AX0
6AV6 371-2BG07-0AX0
6AV6 371-2BL07-0AX0
6AV6 371-2BH07-0AX0
6AV6 371-2BM07-0AX0
6AV6 371-2BJ07-0AX0
6AV6 371-2BN07-0AX0
6AV6 371-2BP07-0AX0
102 400 to 153 600 PowerTags
6AV6 371-2BQ07-0AX0
153 600 to 262 144 PowerTags
6AV6 371-2BR07-0AX0
Incl. 512 archive tags each

Language versions:
128 PowerTags (RC 128)
6AV6 381-2BM07-0AX0
6AV6 381-2BN07-0AX0
2 048 PowerTags (RC 2048)
6AV6 381-2BP07-0AX0
6AV6 381-2BS07-0AX0
6AV6 381-2BQ07-0AX0
102 400 PowerTags (RC 102400)
6AV6 381-2BT07-0AX0
153 600 PowerTags (RC 153600)
6AV6 381-2BU07-0AX0
262 144 PowerTags (RC 262144)
6AV6 381-2BV07-0AX0
For upgrading from:

Runtime packages
1) According to licensing provisions, 1 upgrade package must be

ordered for each WinCC station.
2) Comprehensive Support runs for 1 year. The contract is automatically
extended by 1 more year unless canceled 3 months prior to expiration. According to licensing provisions, 1 Comprehensive Support
package must be ordered for each WinCC station.
3) Requires the current software version.
6/11
Siemens AG 2009
Visualization
SIMATIC WinCC
SIMATIC WinCC
Ordering data
Order No.
SIMATIC WinCC V6.2 SP2 system software
Complete packages
Runtime packages on CD-ROM
6AV6 371-2BD17-0AX0
6AV6 371-2BE17-0AX0
6AV6 371-2BK17-0AX0
Language/script versions:
6AV6 381-1BC06-2AX0
6AV6 381-1BD06-2AX0
6AV6 381-1BE06-2AX0
6AV6 381-1BH06-2AX0
6AV6 381-1BF06-2AX0
6AV6 371-2BF17-0AX0
6AV6 371-2BG17-0AX0
6AV6 371-2BL17-0AX0
6AV6 371-2BH17-0AX0
6AV6 371-2BM17-0AX0
6AV6 371-2BJ17-0AX0
6AV6 371-2BN17-0AX0
Language versions:
6AV6 371-2BP17-0AX0
6AV6 381-1BM06-2AX0
102 400 to 153 600 PowerTags
6AV6 371-2BQ17-0AX0
6AV6 381-1BN06-2AX0
153 600 to 262 144 PowerTags
6AV6 371-2BR17-0AX0
6AV6 381-1BP06-2AX0
6AV6 381-1BS06-2AX0
6AV6 381-1BQ06-2AX0
SIMATIC WinCC V7.0 Archive

1 500 archives
Order No.
SIMATIC WinCC V7.0 Powerpacks (continued)
6AV6 371-1DQ17-0AX0
5 000 archives
6AV6 371-1DQ17-0BX0
10 000 archives
6AV6 371-1DQ17-0CX0
30 000 archives
6AV6 371-1DQ17-0EX0
80 000 archives
6AV6 371-1DQ17-0GX0
120 000 archives
6AV6 371-1DQ17-0JX0
SIMATIC WinCC V7.0 Archiv Powerpacks

For upgrading archiving from

Complete packages on CD-ROM

SIMATIC WinCC V6.2 SP2 ASIA system software
Runtime packages on CD-ROM
Language versions: English/
simplified and traditional
Chinese/Korean/Taiwanese/
Japanese; with license for
6AV6 381-1BC06-2AV0
6AV6 381-1BD06-2AV0
6AV6 381-1BE06-2AV0
1 500 to 5 000 archive tags
6AV6 371-1DQ17-0AB0
5 000 to 10 000 archive tags.
6AV6 371-1DQ17-0BC0
6AV6 381-1BH06-2AV0
6AV6 371-1DQ17-0CE0
65 536 PowerTags (RT Max)
6AV6 381-1BF06-2AV0
6AV6 371-1DQ17-0EG0
6AV6 371-1DQ17-0GJ0
Complete packages on CD-ROM
SIMATIC WinCC Upgrade/Comprehensive Support

SIMATIC WinCC V7 upgrade1)
For upgrading the RT version
Language versions: English/

simplified and traditional
Chinese/Korean/Taiwanese,
Japanese; with license for
from V6.0 to V7.0
6AV6 381-2AA07-0AX4
6AV6 381-1BM06-2AV0
from V6.2 to V7.0
6AV6 381-2AA07-0AX3
6AV6 381-1BN06-2AV0
6AV6 381-1BP06-2AV0
6AV6 381-1BS06-2AV0
65 536 PowerTags (RC Max)
6AV6 381-1BQ06-2AV0
For upgrading the Client RT

version
from V6.0 to V7.0
6AV6 381-2BC07-0AX4
from V6.2 to V7.0
6AV6 381-2BC07-0AX3
from V6.0 to V7.0
6AV6 381-2AB07-0AX4
from V6.2 to V7.0
6AV6 381-2AB07-0AX3
For upgrading the RC version
SIMATIC WinCC Comprehensive Support 2)3)

Software Update Service for
WinCC basic software and
options:

SIMATIC WinCC V6.2 Powerpacks
For upgrading from:
Runtime packages
6AV6 371-1BD06-2AX0
6AV6 371-1BE06-2AX0
6AV6 371-1BK06-2AX0
1 license
6AV6 381-1AA00-0AX5
6AV6 371-1BF06-2AX0
3 licenses
6AV6 381-1AA00-0BX5
6AV6 371-1BG06-2AX0
10 licenses
6AV6 381-1AA00-0CX5
6AV6 371-1BL06-2AX0
6AV6 371-1BH06-2AX0
6AV6 371-1BM06-2AX0
6AV6 371-1BJ06-2AX0
6AV6 371-1BN06-2AX0

2) Comprehensive Support runs for 1 year. The contract is automatically
extended by 1 more year unless canceled 3 months prior to expiration. According to licensing provisions, 1 Comprehensive Support
package must be ordered for each WinCC station.
3) Requires the current software version.
6/12
Siemens AG 2009
Visualization
SIMATIC WinCC
SIMATIC WinCC
Ordering data
Order No.
Order No.
SIMATIC WinCC V6.2 Powerpacks (continued)
Communication via Industrial Ethernet
Complete packages
CP 1613 A2
6GK1 161-3AA01
6AV6 371-1BD16-2AX0
6AV6 371-1BE16-2AX0
6AV6 371-1BK16-2AX0
PCI card (32 bit) for the connection of PG/PC to Industrial Ethernet (communications software
must be ordered separately)
6AV6 371-1BF16-2AX0
CP 1623
6AV6 371-1BG16-2AX0
6AV6 371-1BL16-2AX0
6AV6 371-1BH16-2AX0
PCI Express card (32 bits) for

connecting a PG/PC to Industrial
Ethernet (communications software must be ordered separately)
6AV6 371-1BM16-2AX0
6AV6 371-1BJ16-2AX0
CP 5611 A2
6AV6 371-1BN16-2AX0
PCI card (32 bit) for connecting

a PG/PC to PROFIBUS (communications software included in the
WinCC basic package)

SIMATIC WinCC V6.2 Archive
6GK1 561-1AA01
1 500 archives
6AV6 371-1DQ16-2AX0
5 000 archives
6AV6 371-1DQ16-2BX0
10 000 archives
6AV6 371-1DQ16-2CX0
30 000 archives
6AV6 371-1DQ16-2EX0
80 000 archives
6AV6 371-1DQ16-2GX0
PCI Express card (32-bit) for

connecting a PG/PC to
PROFIBUS (communications
software included in the WinCC
basic package)
120 000 archives
6AV6 371-1DQ16-2JX0
CP 5611 MPI
SIMATIC WinCC V6.2 Archive Powerpacks

For upgrading archiving from
CP 5621
CP 5621 MPI
6AV6 371-1DQ16-2BC0
6AV6 371-1DQ16-2CE0
Comprising CP 5621 (32-bit)

and MPI cable, 5 m
6AV6 371-1DQ16-2EG0
6AV6 371-1DQ16-2GJ0
SIMATIC WinCC V6.2 upgrade1)

For upgrading the RT versio
from V5.x to V6.2 SP2
6AV6 381-1AA06-2AX4
6AV6 381-1AA06-2AX3
6AV6 381-1AA06-2AV4
from V6.x ASIA

to V6.2 SP2 ASIA
6AV6 381-1AA06-2AV3
CP 5613 A2
6AV6 381-1AB06-2AX4
6AV6 381-1AB06-2AX3
from V5.x ASIA

to V6.2 SP2 ASIA
6AV6 381-1AB06-2AV4
from V6.x ASIA

to V6.2 SP2 ASIA
6AV6 381-1AB06-2AV3
Communication manual for

process communication and OPC
communication from WinCC V6
Multi-VGA
GPS (worldwide)

W) Subject to export regulations: AL: 5A002A1A2 and ECCN: 5A002A1A
Y) Subject to export regulations: AL: N and ECCN: 4A994X
6GK1 551-2AA00
6ES7 972-0CA23-0XA0
6GK1 561-3AA01
DCF-77 receiver
DCF77 (Europe)
6AV6 392-1CA06-0AB0
Hardware for process control functions

for time synchronization
English
6GK1 562-1AM00
Communications software
see chapter 7
SIMATIC WinCC V6
Communication Manual
6AV6 392-1CA06-0AA0
PCI card (32-bit) for connecting

a PC to PROFIBUS (communications software must be ordered
separately).
SIMATIC WinCC documentation (to be ordered separately)
German
6GK1 561-1AM01
PC/MPI adapter
PCMCIA card (CARDBUS 32 bit)

for the connection of a PG/
notebook to PROFIBUS or
MPI (communications software
included in WinCC basic
package)
from V5.x ASIA

to V6.2 SP2 ASIA
6GK1 562-1AA00
CP 5512

RS 232/MPI converter,
max. 19.2 Kbit/s
For upgrading the RC version
Comprising CP 5611 A2 and

MPI cable, 5 m
6AV6 371-1DQ16-2AB0
6GK1 162-3AA00
2XV9 450-1AR14
Y
2XV9 450-1AR13
2 screens
6ES7 652-0XX03-1XE0
4 screens
6ES7 652-0XX03-1XE1

Note:
For further information about process control options, see
Catalog ST PCS 7
6/13
Siemens AG 2009
Visualization
SIMATIC WinCC
WinCC options
Overview
C
WinCtion
Op
C
WinCd-on
Ad
C
WinCis-SW
Bas C, RT
R
Options for IT and Business Integration Plant Intelligence

- WinCC/DataMonitor
- For display and analysis of current process states and
historical data on office PCs with standard tools
WinCC/DowntimeMonitor
- For the detection and analysis of standstill times for
machines and systems
WinCC/ProcessMonitor
- Management information system and quality analysis
WinCC/Connectivity Pack
- Access to WinCC archive via OPC HDA, OPC A&E,
OPC XML Server and WinCC OLE-DB/OLE-DB
WinCC/Connectivity Station
- Gateway to WinCC server data over OPC HDA, OPC A&E,
OPC XML server and WinCC OLE-DB /OLE-DB from
independent computers
WinCC/IndustrialDataBridge
- Configurable link to databases and IT systems
C
WinCtion
Op
C
WinCd-on
Ad
C
WinCtion
Op
G_ST80_XX_00175
C
WinCd-on
Ad
The universal WinCC basic software is the basis for modular

expansions. These functional expansions can be obtained in
the form of WinCC options and as WinCC Premium add-ons.
WinCC options are created by WinCC Development and are
Siemens Industry Automation products. You can obtain
support from our Advisory Services and via the central hotline.
Options for scalable plant configurations
WinCC/Server
- To set up a powerful client/server system
WinCC/Web Navigator
- To control and monitor plants via the Internet, in-house intranet or LAN
WinCC/Central Archive Server (CAS)
- For configuring a central archive server
Options for increasing the availability
WinCC/Redundancy;
- For increased system availability through redundancy
SIMATIC Maintenance Station
- For system-integrated diagnostics and system-based asset
management
WinCC/ProAgent
- For reliable process diagnostics
Options for SCADA expansions

WinCC/User Archives
- To manage data sets in user archives
Options for sector-specific expansions
SIMATIC BATCH (for WinCC)
- WinCC in combination with the SIMATIC BATCH products
offers the solution for implementation of batch processes in
accordance with ISA S88.
- Batch processes which place heterogeneous demands on
the interfacing of different types of PLC, such as S7-400/300,
S5 and third-party PLCs, are automated using SIMATIC
BATCH (for WinCC).
WinCC/ChangeControl
- Change and version management
- Generation of audit trails for engineering
WinCC/Audit
- Change management
- Generation of audit trails for engineering and runtime
SIMATIC Logon
- Central management of WinCC users, plant-wide
(to CFR 21 Part 11)
Options for individual system expansions
WinCC/IndustrialX
- For the creation of customized WinCC ActiveX objects in
a VB development environment and .net.
WinCC/ODK
- For the use of open programming interfaces
(Open Development Kit)
Options for comprehensive support
WinCC/Comprehensive Support
- Extensive support package; contains current updates/
upgrades for WinCC basic software and options.
More information
WinCC options
http://www.siemens.com/wincc/options
6/14
Siemens AG 2009
Visualization
SIMATIC WinCC
WinCC options
Ordering data
Order No.
WinCC/Server
for WinCC V7.0
6AV6 371-1CA07-0AX0
for WinCC V6.2
6AV6 371-1CA06-2AX0
WinCC/Web Navigator V7.0

for WinCC V7.0
Base Pack (3 client licenses)
10 client licenses
25 client licenses
50 client licenses
6AV6 371-1DH07-0AX0
6AV6 371-1DH07-0BX0
6AV6 371-1DH07-0CX0
6AV6 371-1DH07-0DX0
WinCC/Web Navigator
Powerpacks V7.0
From 3 to 10 clients
6AV6 371-1DH07-0AB0
6AV6 371-1DH07-0BC0
6AV6 371-1DH07-0CD0
6AV6 371-1DH07-0EX0
6AV6 371-1DH07-0FX0
6AV6 371-1DH06-2AV0
10 client licenses
6AV6 371-1DH06-2BV0
25 client licenses
6AV6 371-1DH06-2CV0
50 client licenses
6AV6 371-1DH06-2DV0
WinCC/Web Navigator
Powerpacks
6AV6 371-1DH06-2AB0
6AV6 371-1DH06-2BC0
6AV6 371-1DH06-2CD0
for WinCC V6.2 SP2
6AV6 371-1DH06-2EX0
for WinCC V6.2 SP2 ASIA
6AV6 371-1DH06-2EV0
WinCC/Web Navigator
Diagnostics Server
for WinCC V6.2 SP2
WinCC/Web Navigator Upgrade
V6.0 to V7.0
For 3 clients
6AV6 371-1DH07-0AX4
For 10 clients
6AV6 371-1DH07-0BX4
For 25 clients
6AV6 371-1DH07-0CX4
For 50 clients
6AV6 371-1DH07-0DX4
V6.2 to V7.0
For 3 clients
V6.2 SP2 ASIA

WinCC/Web Navigator
Diagnostics Client
WinCC/Web Navigator
Diagnostics Server
for WinCC V7.0
WinCC/Web Navigator
(continued)
V6.2 (for ASIA variants as well)
WinCC/Web Navigator
Diagnostics Client
for WinCC V7.0
Order No.
options for WinCC (continued)
6AV6 371-1DH07-0AX3
For 10 clients
6AV6 371-1DH07-0BX3
For 25 clients
6AV6 371-1DH07-0CX3
6AV6 371-1DH06-2FX0
6AV6 371-1DH06-2FV0
V1.x to V6.2 SP2

For 3 clients
6AV6 371-1DH06-2AX4
For 10 clients
6AV6 371-1DH06-2BX4
For 25 clients
6AV6 371-1DH06-2CX4
For 50 clients
6AV6 371-1DH06-2DX4
V6.x to V6.2 SP2

For 3, 10, 25, 50 clients1)
6AV6 371-1DH06-2XX3
6AV6 371-1DH07-0DX3
For Web Navigator Diagnostics

Client
6AV6 371-1DH06-2EX3
6AV6 371-1DH07-0EX4

Server
6AV6 371-1DH06-2FX3

Client
Server
6AV6 371-1DH07-0FX4
For 50 clients
V6.x to V7.0
V6.x ASIA to V6.2 SP2 ASIA
Load Balancing Step Up
for 3, 10, 25, 50 clients1)
6AV6 371-1DH06-2XV3
WinCC/Web Load Balancing

V6.2
WinCC/Web Load Balancing

V7.0
Load Balancing
WinCC/Web Navigator Upgrade
6AV6 371-1DH07-0JX0
6AV6 371-1DH07-0FJ0
Load Balancing
6AV6 371-1DH06-2JX0
Load Balancing Step Up
6AV6 371-1DH06-2FJ0
WinCC/Web Navigator
WinCC/CAS V7.0 basic

packages
V6.2 SP2
for WinCC V6.2 SP2
WinCC/CAS V7.0
6AV6 371-1DH06-2AX0
10 client licenses
6AV6 371-1DH06-2BX0
6AV6 371-1DQ17-0XX0
WinCC/CAS upgrade
V6.2 to V7.0
6AV6 371-1DQ17-0XX3
25 client licenses
6AV6 371-1DH06-2CX0
WinCC/CAS V6.2 SP2

basic packages
50 client licenses
6AV6 371-1DH06-2DX0
WinCC/CAS V6.2 SP2
6AV6 371-1DQ16-2XX0
WinCC/CAS V6.2 SP2 ASIA
6AV6 371-1DQ16-2XV0
1) incl. upgrade for diagnostics client, diagnostics server,

Load Balancing and Load Balancing StepUp.
2) Documentation in the language versions English/French/German
3) Documentation in the language versions Englisch/Japanese/
Simplified Chinese
6/15
Siemens AG 2009
Visualization
SIMATIC WinCC
WinCC options
Ordering data
Order No.
Optionen fr WinCC (continued)

WinCC/Redundancy
for WinCC V7.0
6AV6 371-1CF07-0AX0
for WinCC V6.2
6AV6 371-1CF06-2AX0
WinCC/DataMonitor V6.2 SP2

ASIA for WinCC V6.2 SP2 ASIA
1 client license
6AV6 371-1DN06-2LV0
3 client licenses
6AV6 371-1DN06-2AV0
10 client licenses
6AV6 371-1DN06-2BV0
Software for implementation of

a plant-oriented asset management system
25 client licenses
6AV6 371-1DN06-2CV0
50 client licenses
6AV6 371-1DN06-2DV0
Basic package
with engineering software
(Floating License) and Runtime
License for 100 devices
WinCC/DataMonitor,
Powerpacks V6.2
Powerpack 100
Runtime License for 100
additional devices
Powerpack 500
additional devices
6ES7 840-0WD20-0YD0
WinCC/DowntimeMonitor V1.0
SP1 for WinCC V6.2 SP2 and
WinCC V6.2 SP2 ASIA
Powerpack 1000
additional devices
6ES7 840-0WD30-0YD0
5 equipment units
6AV6 372-1DB06-2BX0
25 equipment units
6AV6 372-1DB06-2DX0
Basic demo package 2007 SP1
50 equipment units
6AV6 372-1DB06-2FX0
100 equipment units
6AV6 372-1DB06-2HX0
200 equipment units
6AV6 372-1DB06-2KX0
SIMATIC Maintenance Station

2007 SP1
6ES7 840-0WD00-0YA0
6ES7 840-0WD10-0YD0
6ES7 840-0WD00-0YA7
WinCC/DataMonitor V7.0 for

WinCC V7.0
Order No.
From 1 to 3 clients
6AV6 371-1DN06-2LA0
6AV6 371-1DN06-2AB0
6AV6 371-1DN06-2BC0
6AV6 371-1DN06-2CD0
1 client license
6AV6 371-1DN07-0LX0
3 client licenses
6AV6 371-1DN07-0AX0
WinCC/DowntimeMonitor
Powerpacks V1.0
10 client licenses
6AV6 371-1DN07-0BX0
From 5 to 25 equipment units
6AV6 372-1DB06-2BD0
25 client licenses
6AV6 371-1DN07-0CX0
6AV6 372-1DB06-2DF0
50 client licenses
6AV6 371-1DN07-0DX0
6AV6 372-1DB06-2FH0
6AV6 372-1DB06-2HX0
WinCC/DataMonitor
Powerpacks V7.0
From 1 to 3 clients
6AV6 371-1DN07-0LA0
6AV6 371-1DN07-0AB0
6AV6 371-1DN07-0BC0
6AV6 371-1DN07-0CD0
WinCC/DataMonitor, upgrade
WinCC/ProcessMonitor V1.0
SP1 for WinCC V6.2 SP2 and
WinCC V6.2 SP2 ASIA
50 KPI
6AV6 372-1DA06-2BX0
250 KPI
6AV6 372-1DA06-2DX0
1 500 KPI
6AV6 372-1DA06-2FX0
from V6.0 to V7.0
6AV6 371-1DN07-0XX4
WinCC/ProcessMonitor
Powerpacks V1.0
from V6.2 to V7.0
6AV6 371-1DN07-0XX3
From 50 to 250 KPI
6AV6 372-1DA06-2BD0
6AV6 371-1DN06-2XX3
From 250 to 1500 KPI
6AV6 372-1DA06-2DF0
from V6.x ASIA to V6.2 SP2 ASIA
6AV6 371-1DN06-2XV3
WinCC/Connectivity Pack &

WinCC/DataMonitor V6.2 SP2

for WinCC V6.2 SP2
Basic packages
1 client license
6AV6 371-1DN06-2LX0
3 client licenses
6AV6 371-1DN06-2AX0
10 client licenses
6AV6 371-1DN06-2BX0
25 client licenses
6AV6 371-1DN06-2CX0
50 client licenses
6AV6 371-1DN06-2DX0
V7.01)
6AV6 371-1DR07-0AX0
V7.01)
6AV6 371-1DR17-0AX0
V6.2 SP2
6AV6 371-1DR06-2AX0
V6.2 SP2
6AV6 371-1DR16-2AX0
Upgrade1)
V6.x -> V6.2 SP2
1) Upgrades from V6.x to V7.0 are included in the WinCC V7 upgrades
6/16
6AV6 371-1DR06-2AX3
Siemens AG 2009
Visualization
SIMATIC WinCC
WinCC options
Ordering data
Order No.
Order No.
V7.0, option for WinCC V7.0
WinCC/ChangeControl RC
For the configuration of the audit
trail incl. RT
for data exchange with databases

and OPC servers, language
versions: German/English
with 128 tags
6AV6 371-1DX07-0AX0
with 512 tags
6AV6 371-1DX07-0BX0
with 2048 tags
6AV6 371-1DX07-0CX0
with 10000 tags
6AV6 371-1DX07-0DX0
Powerpack V7.0
V7.0, for WinCC V7.01)
6AV6 371-1DV27-0AX0
V6.2, for WinCC V6.2 and

WinCC V6.2 SP2
6AV6 371-1DV26-2AX0
6AV6 371-1DV17-0AX0
6AV6 371-1DV16-2AX0
6AV6 371-1DV07-0AX0

WinCC V6.2 SP2
6AV6 371-1DV06-2AX0
for WinCC/ChangeControl RC, B

WinCC/Audit RC and WinCC
Audit RT
6AV6 371-1DV07-0AX4
WinCC/Audit RC
For the configuration of the audit
trail incl. RT
from 128 to 512 tags
6AV6 371-1DX07-0AB0

WinCC V6.2 SP2
6AV6 371-1DX07-0BC0
WinCC/Audit RT
6AV6 371-1DX07-0CD0
Creation of the audit trail in RT
WinCC/ IndustrialDataBridge
upgrade
from V6.1 to V7.0
6AV6 371-1DX07-0XX4
V6.1, option for WinCC V6. 2
Upgrades
V6.x to V7.01)
for data exchange with databases

and OPC servers, language
versions: German/English
with 128 tags
6AV6 371-1DX06-1AX0
with 512 tags
6AV6 371-1DX06-1BX0
with 2048 tags
6AV6 371-1DX06-1CX0
for WinCC/Audit RC and

WinCC Audit RT
with 10000 tags
6AV6 371-1DX06-1DX0
SIMATIC Logon V1.4-SP1
6AV6 371-1DX06-1AB0
Central user management for

WinCC V6.2 and WinCC V7.0
Runtime license for an operator
station1)
6AV6 371-1DX06-1AC0
WinCC/IndustrialX
6AV6 371-1DX06-1AD0
V7.0; for WinCC V7.0 and V6.x
6AV6 371-1DX06-1BC0
WinCC/ODK
6AV6 371-1DX06-1BD0
V7.0; for WinCC V7.0 and V6.x
6AV6 371-1DX06-1CD0
WinCC/ODK Upgrade
WinCC/Client Access License
6AV6 371-1ES06-0AX0
to V7.0
Powerpack V6.1
For client access to historical

WinCC data
WinCC/Client Access License
per processor
6AV6 371-1DV06-2AX3
6ES7 658-7BX41-2YA0
6AV6 371-1EL17-0AX0
6AV6 371-1CC07-0AX0
6AV6 371-1CC07-0AX4
WinCC/Comprehensive
Support1) 2)
6AV6 371-1ES06-0CX0
For access to historical WinCC

data; any number of clients per
processor
WinCC/User Archives
for WinCC V7.0
6AV6 371-1CB07-0AX0
for WinCC V6.2
6AV6 371-1CB06-2AX0
SIMATIC BATCH (for WinCC)
6ES7 657-1SA07-0YA0
Software bundle for the creation

of recipes and control of batch
processes in accordance with
ISA S88 based on SIMATIC
BATCH.
SIMATIC BATCH Server 10 units
SIMATIC BATCH Recipe system
(Floating License)
SIMATIC BATCH CC
(Floating License)
V6.x to V6.2
Automatic delivery of current

updates/upgrades for WinCC
basic software and options
Valid for
1 license
6AV6 381-1AA00-0AX5
3 licenses
6AV6 381-1AA00-0BX5
10 licenses
6AV6 381-1AA00-0CX5
1) Comprehensive support runs for one year. The contract is automatically extended by a further year unless canceled 3 months prior to
expiry.
2) Requires the current software version
Note:
For further information about process control options, see
Catalog ST PCS 7
6/17
Siemens AG 2009
Visualization
WinCC options
Ordering data
Order No.
SIMATIC WinCC/ProAgent
Software option package for
process error diagnosis based on
S7 GRAPH V5 and higher and S7
PDIAG V5 and higher, functional
enhancement for SIMATIC
WinCC, electronic documentation in English, French and
German; functions and standard
screens for use on a PC (resolution 1024 x 768 pixels) and
Panel PC 577/677/877 15
(resolution 1024 x 768 pixels) in
English, French and German,
runtime license (single license)
WinCC version:
V7.0, V6.2 (ProAgent V6.0 SP4)
6AV6 371-1DG06-0EX0
Upgrade
to V6.0 (SP4)
6AV6 371-1DG06-0EX4

6AV6 691-1SA01-0AX0
CD-ROM

SIMATIC HMI
7
6/18
Siemens AG 2009
7/2
7/2
7/3
7/4
7/5
7/6
7/7
7/9
7/10
7/11
7/12
7/14
7/16
7/17
Communications processors
for Industrial Ethernet
Introduction
Connection options to PCs
CP 1604
CP 1616
CP 1613 A2
CP 1623
S7-REDCONNECT
SOFTNET for Industrial Ethernet
SOFTNET PN IO
OPC server for Industrial Ethernet
PN CBA OPC server
SNMP OPC server
7/17
7/18
7/19
7/21
7/23
7/25
7/27
7/29
7/31
7/33
7/34
Communications processors
for PROFIBUS
Introduction
CP 5603
CP 5613 A2
CP 5613 FO
CP 5614 A2
CP 5512
CP 5611 A2
CP 5621
SOFTNET for PROFIBUS
OPC server for PROFIBUS
7/35
7/35
Engineering Tools
SINEMA E
Siemens AG 2009
Communications processors for Industrial Ethernet
Introduction
Overview
CPs with an internal microprocessor
Protocol software executes on the CP
Free PC resources for applications
Suitable for comprehensive applications
Recommended for applications with HMI systems with high
performance requirements, e.g. WinCC
Recommended for large systems
(eight stations or more, e.g. SIMATIC)
Constant communication throughput
Can be used for redundant communication
Use for PROFINET IO real-time applications
(RT, IRT with CP 1616/CP 1604)
Time synchronization
CPs without an internal microprocessor
Protocol software executes on the PG/PC
PC resources are divided between communications and
applications
Suitable for less comprehensive applications
Recommended for smaller applications
(up to eight stations, e.g. SIMATIC)
Communications performance depends on PC resources
and PC loading
7/2
Siemens AG 2009
Overview
(PEHGGHG6\VWHPV

%R[3&%

3DQHO3&%
3DQHO3&%
0LFURER[%
:LQGRZV;3(PEHGGHG
6363)3
%R[3&%
6,0$7,&,QGXVWULDO3&
0LFURER[%
%R[3&%
5DFN3&%3DQHO3&%
2S
V\V
5DFN3&%
6,0$7,&,QGXVWULDO3&
)LHOG3*
)LHOG3*0
:LQGRZVVHUYHU
2SHUDWLQJV\VWHPHQYLURQPHQW
:LQGRZV6HUYHU563
:LQGRZV;33UR63
&RPPXQLFD
WLRQVKDUGZDUH
&3VDQGVRIWZDUHIRU,QGXVWULDO(WKHUQHW
&3$
3&,ELW
&3
3&,H[
6,0$7,&3*3&
ZLWKLQWHJUDO
(WKHUQHW
LQWHUIDFH
6
65('&211(&7
6
65('&211(&7
62)71(76
62)71(76/HDQ
62)71(73*

-
-
-
-

-
-

-
-
-
-
-
&3VDQGVRIWZDUHIRU352),1(7
'.[[31,29
&3
3&3OXV
'.[[31,29
6,0$7,&3*3&
ZLWKLQWHJUDO
(WKHUQHW
LQWHUIDFH
62)71(731,2
31&%$23&VHUYHU

1) Use of these CPs requires porting of the Development Kit DK-16xx PN IO to the
relevant operating system environment. You can order the DK-16xx PN IO on
the Internet at www.siemens.de/simatic-net/dk16xx. It contains sample software
for Linux Suse 10 and Windows XP Professional. IRT operation requires an
exclusive interrupt, which is not available in all expansion slots. In the case of SIMATIC Industrial PC versions and integrated PROFINET interface, the additional
use of CP 1616/CP 1604 has not been released.
2) The use of these CPs in other operating system environments requires the
porting of the development kit DK-5613 into the respective operating system
environment. You can order the DK-5613 on the Internet at
3) integrated PROFIBUS interface is optional
4) may be possible with restrictions, depending on the memory expansion and processor performance.
5) integrated PROFIBUS interface is optional in some cases
6) requires at least 2 PCI or 2 PCIe slots (4-way redundancy requires
4 free PCI or 4 PCIe slots!); hybrid configurations with CP 1613 A2 (PCI) and CP
1623 (PCIe) are possible, depending on PC configuration
7) not possible for 677B in version with 1x PCI or 1x PCIe slot
8) no 4-way redundancy, as only 2 slots available
9) depending on the slots of the selected PC version
10) with SOFTNET PN IO Linux
-
Instructions
boundary conditions of use for the SIMATIC NET products. These can be found on the Internet pages shown
below.
- for further details on XP Embedded, see http://support.
automation.siemens.com/WW/view/de/21661041
- further details relating to system requirements and operating environments can be found in the readme file of the
communications products on the SIMATIC NET PC CD,
Software Edition 2008 http://support.automation.siemens.
com/WW/view/de/31675909
updates to the above table can be viewed at http://www.
siemens.com/simatic-net/ik-info
suitable
not suitable
suitable under
certain conditions
with SIMATIC NET-CD

Edition 2008
*B,.B;;B
&3
3&,ELW
7/3
Siemens AG 2009
CP 1604
Overview
PC/104 Plus module for connecting PC/104 Plus systems to
PROFINET IO
Full/half duplex with autonegotiation
With Ethernet real-time ASIC ERTEC 400
Integral 4-port real-time switch
Communication services:
- PROFINET IO controller and/or PROFINET IO device
- Support of IRT in motion control applications
High performance through direct memory access
Integration in network management systems through the
support of SNMP
Comprehensive diagnostics possibilities for installation, startup and operation of the module
Powerful configuration tools are included in delivery of module
7&3
8'3
31
053
23&
3*23 66
,7
*B,.B;;B
,62
Ordering data
processor
Order No.
6GK1 160-4AA00
PCI/104 Plus Card (32 bit)

with ASIC ERTEC 400 for connecting PC/104 Plus systems to
PROFINET IO with 4-Port-RealTime-Switch (RJ45); ); incl. IO Base
Software for PROFINET IO Controller and NCM PC; single license for
one installation, runtime software,
software and electronic manual on
CD-ROM, Class A, for 32 Bit
Windows XP Professional; other
operating systems by means of
Development Kit DK-16xx PN IO
German/English
CP 1604 Microbox Package
Package for implementing the
CP 1604 in the SIMATIC Microbox
PC; comprising the CP 1604,
connection board, power supply
and expansion racks for Microbox
PC; for use with Development Kit
DK-16xx PN IO; NCM PC
6GK1 160-4AU00
Accessories
Connection board for CP 1604 A
Connection board for CP 1604
with four RJ45 sockets
incl. connecting cable
6GK1 160-4AC00
Power supply for CP 1604

Redundant power supply for
CP 1604 for operating the integral
4-port switch of the CP 1604 with
the PC/104 system switched off;
includes connecting cable
6GK1 160-4AP00
DK-16xx PN IO V2.1
development kit
Software development kit for
CP 1616/CP 1604; driver and
IO-Base software for CP 1616/
CP 1604 as PN IO controller and IO
device in source code for transfer to
other PC-based operating systems;
including executable example code
for SUSE Linux 9.3 and Windows XP
Professional
see
simatic-net/dk16xx
7/4
Order No.
IE FC RJ45 Plug 180
RJ45 plug-in connector for
ndustrial Ethernet with a rugged
metal housing and integrated
insulation displacement contacts
for connecting Industrial Ethernet
FC installation cables; with 180
cable outlet; for network components and CPs/CPUs with
Industrial Ethernet interface
1 pack = 1 unit
6GK1 901-1BB10-2AA0
1 pack = 10 units
6GK1 901-1BB10-2AB0
1 pack = 50 units
6GK1 901-1BB10-2AE0
SCALANCE X204-2
with four 10/100 Mbit/s RJ45 ports
and two fiber-optic ports
6GK5 204-2BB10-2AA3
SCALANCE X204IRT
4 x 10/100 Mbit/s RJ45 Ports
6GK5 204-0BA00-2BA3
IE FC TP Standard Cable GP
2 x 2 (Type A)
4-core, shielded TP installation
cable for connection to IE
FC Outlet RJ45/ IE FC RJ45 Plug;
PROFINET-compatible;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
6XV1 840-4AH10
IE FC TP Flexible Cable GP
2 x 2 (Type B)
FC Outlet RJ45/ IE FC RJ45 Plug
for occasional movement;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
6XV1 870-2B
Siemens AG 2009
CP 1616
Overview
Ordering data
Order No.
processor
6GK1 161-6AA00
PCI Card (32 Bit; 3.3/5 V universal

keyed) with ASIC ERTEC 400 for
connecting PCs to PROFINET IO
with 4-Port-Real-Time-Switch
(RJ45); incl. IO Base Software for
PROFINET IO Controller and
NCM PC; single license for one
installation, runtime software,
software and electronic manual
on CD-ROM, Class A, for 32 Bit
Windows XP Professional;
other operating systems via
Development Kit DK-16xx PN IO
German/English
Accessories
7&3
8'3
31
053
23&
3*23 66
,7
*B,.B;;B
,62
PCI module for connecting PCs and SIMATIC PGs/PCs to

PROFINET IO (Universal Keyed 3.3 V and 5 V;
33 MHz/66 MHz; 32-bit, runs in 64-bit PCI-X systems)
Full/half duplex with autonegotiation
With Ethernet real-time ASIC ERTEC 400
Integral 4-port real-time switch
- PROFINET IO controller and/or PROFINET IO device
- Support of IRT in motion control applications
High performance through direct memory access
Integration in network management systems through the
support of SNMP
Comprehensive diagnostics possibilities for installation, startup and operation of the module
Powerful configuration tools are part of the scope of delivery
of the module
DK-16xx PN IO V2.1
development kit
CP 1616/CP 1604;
driver and IO-Base software
for CP 1616/CP 1604 as PN IO
controller and IO device in source
code for transfer to other
PC-based operating systems;
including executable example
code for SUSE Linux 10 and
see
simatic-net/dk16xx
IE FC RJ45 Plug 180

RJ45 plug-in connector for
Industrial Ethernet with a rugged
metal housing and integrated
insulation displacement contacts
for connecting Industrial Ethernet
FC installation cables; with 180
cable outlet; for network components and CPs/CPUs with
Industrial Ethernet interface
1 pack = 1 unit
6GK1 901-1BB10-2AA0
1 pack = 10 units
6GK1 901-1BB10-2AB0
1 pack = 50 units
6GK1 901-1BB10-2AE0
IE FC TP Standard Cable GP
2 x 2 (Type A)
6XV1 840-4AH10

FC Outlet RJ45/ IE FC RJ45 Plug;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
IE FC TP Flexible Cable GP
2 x 2 (Type B)
6XV1 870-2B

FC Outlet RJ45/ IE FC RJ45 Plug
for occasional movement;
with UL approval;
sold by the meter;
max. length 1000 m,
minimum order 20 m
7/5
Siemens AG 2009
CP 1613 A2
Overview
PCI card (32 bit; 33 MHz/66 MHz; 3.3 V/5 V universal key) with
microprocessor for connection of PG/PC to Industrial Ethernet
with 10/100 Mbit/s Autosensing/Autonegotiation
Communication services using
- Open IE communication (via TCP/IP and UDP)
- ISO transport protocol
- S7 communication
- Open communication (SEND/RECEIVE)
15-pole ITP connection
RJ45 connection
ISO and TCP/IP transport protocol onboard
SNMP-supported diagnostics
The appropriate OPC server and configuration tools are
included in the respective scope of supply of the communication software
7&3
8'3
31
053
23&
3*23 66
,7
*B,.B;;B
,62
Ordering data
Order No.
processor
PCI card (32-bit, 33 MHz/66 MHz;
3.3 V/5 V universal keyed) for
connection to Industrial Ethernet
(10/100 Mbit/s) with ITP and RJ45
connection over S7-1613 and
S7-REDCONNECT, incl. drivers
for 32-bit Windows XP Professional SP2/3, 2003 R2 Server
SP2, Vista Business/Ultimate SP1
6GK1 161-3AA01
S7-REDCONNECT 2008 Edition

Software for fail-safe S7 communication over redundant networks
incl. S7-OPC server, S7-1613
2008, runtime software, software
and electronic manual on CD-ROM,
license key on USB flash drive,
Class A, for 32-bit Windows XP
Professional SP2/3; Windows 2003
Server R2, SP2; Windows Vista
Business/Ultimate SP1;
Windows 2008 Server;
German/English

Software for S7 and open
communication, incl. PG/OP
communication, OPC server and
NCM PC; up to 120 connections,
Class A, for 32-bit Windows XP Professional SP2/3; Windows 2003
for CP 1613/CP 1613 A2/CP 1623;
German/English
6GK1 716-1CB71-3AA0

for 1 year, with automatic extension; requirement: Current software version
6GK1 716-1CB00-3AL0
Z
Upgrade S7-1613 from 2006
Edition to S7-1613 2008 Edition
6GK1 716-1CB00-3AE0

V6.1, V6.2 or V6.3 to
S7-1613 2008 Edition
6GK1 716-1CB00-3AE1
7/6
Order No.
Single License for 1 installation Z

6GK1 716-0HB71-3AA0
Upgrade S7-REDCONNECT
from 2006 Edition to S7REDCONNECT 2008 Edition
6GK1 716-0HB00-3AE0
Z
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 716-0HB00-3AE1
Power Pack S7-REDCONNECT Z

2008 Edition
6GK1 716-0HB71-3AC0
For expanding S7-1613 2008 to

S7-REDCONNECT, single license
for 1 installation, runtime software,
on CD-ROM, license key on USB
flash drive, Class A, for 32-bit
Windows XP Professional SP2/3;
SP1; Windows 2008 Server;
German/English
6GK1 716-0HB00-3AL0
Siemens AG 2009
CP 1623
Overview
PCI Express Card (PCIe x1) with an internal microprocessor
for connection of PG/PC to Industrial Ethernet
10/100/1000 Mbit/s
(Autosensing/Autocrossover/Autonegotiation)
Integrated 2-port switch (2 x RJ45 connection)
Communications services via
- Open IE communication (TCP/IP and UDP)
- ISO transport protocol
- S7 communication
ISO and TCP/IP transport protocol on board
SNMP-supported diagnostics
included in the scope of supply of the respective communication software.
7&3
8'3
31
053
23&
3*23 66
,7
*B,.B;;B
,62
7/7
Siemens AG 2009
CP 1623
Ordering data
processor
Order No.
A
6GK1 162-3AA00
PCI Express x1 card for connection to Industrial Ethernet

(10/100/1000 Mbit/s) with 2 port
switch (RJ45) connection via
S7-1613 and S7-REDCONNECT,
incl. drivers for 32-bit Windows
XP Professional SP2/3,
2003 R2 Server SP2,
Vista Business/Ultimate SP1
communication, incl. PG/OP
communication, OPC server and
NCM PC; up to 120 connections,
Class A, for 32-bit Windows XP Professional SP2/3; Windows 2003
Business/Ultimate SP1; Windows
2008 Server;
for CP 1613/CP 1613 A2/CP 1623;
German/English
IE FC RJ45 Plug 4 x 2
RJ45 plug connector for Industrial
Ethernet (10/100/1000 Mbit/s)
with a rugged metal housing and
integrated insulation displacement
contacts for connecting Industrial
Ethernet FC installation cables;
180 cable outlet; for network components and CPs/CPUs with Industrial Ethernet interface
1 pack = 1 unit
6GK1 901-1BB11-2AA0
1 pack = 10 units
6GK1 901-1BB11-2AB0
6GK1 901-1BB11-2AE0
6GK1 716-1CB71-3AA0
1 pack = 50 units

6GK1 716-1CB00-3AL0
Switches SCALANCE X-400
Z
Upgrade S7-1613 from 2006
Edition to S7-1613 2008 Edition
6GK1 716-1CB00-3AE0

V6.1, V6.2 or V6.3
to S7-1613 2008 Edition
6GK1 716-1CB00-3AE1
S7-REDCONNECT Edition 2008

Software for fail-safe S7
communication over redundant
networks incl. S7-OPC server,
S7-1613 2008, runtime software,
German/English
6GK1 716-0HB71-3AA0

6GK1 716-0HB00-3AL0
from 2006 Edition to S7REDCONNECT 2008 Edition
6GK1 716-0HB71-3AC0

German/English
Order No.
2008 Edition
6GK1 716-0HB00-3AE0
Z
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 716-0HB00-3AE1
Modular Industrial Ethernet

switches with integrated
RJ45 ports for setting up electrical and/or optical Industrial Ethernet networks;
integrated redundancy manager,
IT functions (RSTP, VLAN, etc.),
PROFINET IO Device,
network management via SNMP
and web server;
incl. operating instructions,
Industrial Ethernet network manual and configuration software
on CD-ROM;
C-PLUG included in the scope
of supply
SCALANCE X408-2;
4 x 10/100/1000 Mbit/s and
4 x 10/100 Mbit/s RJ45 ports;
2 x Gigabit/Fast Ethernet media
module slots
6GK5 408-2FD00-2AA2
SCALANCE X414-3E;
2 x 10/100/1000 Mbit/s and
12 x 10/100 Mbit/s RJ45 ports;
1 x Gigabit Ethernet and
2 x Fast Ethernet media
module slots;
1 x Extender interface
6GK5 414-3FC00-2AA2

7/8
Siemens AG 2009
S7-REDCONNECT
Overview
Ordering data
For connecting PCs over redundant Industrial Ethernet to the

SIMATIC S7-400H
Protected from communication failures arising from a fault in
the double bus or in redundant rings
For redundantly configured Industrial Ethernet
Can also be implemented in non-redundant networks
No additional programming overhead for the PC and in H systems
The appropriate OPC server and configuration tools are included in the scope of supply of the respective communication software
Enhanced redundancy over 4-way communication (STEP 7
V5.1 + SP4 and higher)
3&ZLWK
[&3$&3
DQG65('&211(&7
+&38
LQVLQJOHPRGH
352),%86
(70
*B,.B;;B
6+
System configuration for S7-REDCONNECT
31
053
23&
3*23 66
,7
*B,.B;;B
7&3
8'3
6GK1 716-0HB71-3AA0

6GK1 716-0HB00-3AL0
Upgrade S7-REDCONNECT,
2006 Edition or higher,
to S7-REDCONNECT
2008 Edition
,QGXVWULDO(WKHUQHW
,62
Order No.
S7-REDCONNECT Edition 2008

Software for fail-safe S7
communication over redundant
networks incl. S7-OPC server,
S7-1613 2008, runtime software,
German/English
6GK1 716-0HB00-3AE0
Z
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 716-0HB00-3AE1

2008 Edition
German/English
6GK1 716-0HB71-3AC0
processor
PCI card (32-bit, 33 MHz/66 MHz;
3.3 V/5 V universal keyed) for
connection to Industrial Ethernet
(10/100 Mbit/s) with ITP and RJ45
connection over S7-1613 and
S7-REDCONNECT, incl. driver for
32-bit Windows XP Professional
SP2/3, 2003 R2 Server SP2,
6GK1 161-3AA01
A
processor
PCI Express x1 card (3.3 V/12)
for connection to Industrial
Ethernet (10/100/1000 Mbit/s)
with 2-port switch (RJ45)
connection via S7-1613 and
S7-REDCONNECT, incl. driver for
32-bit Windows XP Professional
SP2/3, 2003 R2 Server SP2,
6GK1 162-3AA00

7/9
Siemens AG 2009
SOFTNET for Industrial Ethernet
Overview
Ordering data
For coupling programming devices/PCs/workstations to

programmable controllers
- S7 communication
Can be used with
- Layer 2 Ethernet card (PCI/PCIe)
- Integrated Industrial Ethernet interface
- Modem (Remote Access Service RAS)
Complete protocol stack as a software package
included in the scope of supply of the respective communication software
Order No.
SOFTNET Edition 2008

communication, incl. OPC server,
PG/OP communication and
NCM PC, runtime software,
German/English
SOFTNET-S7 2008 Edition
up to 64 connections
3&,3&ZLWK62)71(7
IRU,QGXVWULDO(WKHUQHW
6GK1 704-1CW71-3AA0

6GK1 704-1CW00-3AL0
Upgrade from Edition 2006

to Edition 2008
Upgrade from V6.0, V6.1, V6.2 Z

or V6.3 to Edition 2008
6GK1 704-1CW00-3AE1
*B,.B;;B
up to 8 connections
6
ZLWK&3
&3,7
6
ZLWK&3/HDQ
&3
&3$GYDQFHG
6
ZLWK&3
&3$GYDQFHG
053
23&
3*23 66
,7
*B,.B;;B
31
6GK1 704-1LW71-3AA0

6GK1 704-1LW00-3AL0

to Edition 2008
6GK1 704-1LW00-3AE0

6GK1 704-1LW00-3AE1
SOFTNET-PG Edition 2008

System configuration SOFTNET for Industrial Ethernet
7&3
8'3
6GK1 704-1CW00-3AE0
SOFTNET-S7 Lean Edition 2008

,QGXVWULDO
(WKHUQHW
,62
Software for PG/OP-communication; runtime software, software

and electronic manual on CDROM, license key on USB flash
drive, Class A, for 32-bit Windows
XP Professional SP2/3, Windows
2003 Server R2, SP2, Windows
Vista Business/Ultimate SP1;
German/English
6GK1 704-1PW71-3AA0

6GK1 704-1PW00-3AL0

to Edition 2008
6GK1 704-1PW00-3AE0

6GK1 704-1PW00-3AE1
7/10
Siemens AG 2009
SOFTNET PN IO
Overview
SIMATIC NET
OPC-Scout
PC/IPC with
SOFTNET PN IO
WinCC
OPC-Client
Microsoft Office
OPC-Client
OPC XML
Webclient
COM/DCOM
Internet
Intranet
OPC XML DA
as Webservice
PN IO OPC-Server
PROFINET
Communication
SOFTNET PN IO
352),1(7
,QGXVWULDO(WKHUQHW
,(3%/LQN
31,2
HJ6ZLWK
&38[DQG
&3$GYDQFHG
(7SUR
(76ZLWK
,031
G_IK10_XX_10073
352),%86
z.B. S7-300 with

CP 342-5 as Slave
ET 200S
PC with SOFTNET PN IO as PROFINET IO Controller
7&3
8'3
31
053
23&
3*23 66
Ordering data
,7
*B,.B;;B
,62
Software with PROFINET IO Controller function for coupling

PG/PC and IPC with PROFINET IO Devices
Possible applications:
- PC-based control systems
- HMI systems
- Test applications
- PROFINET IO Controller
Can be used with
- Integrated interfaces of SIMATIC PG/PC
- You can find more information about the environment of use
at www.siemens.com/simatic-net/ik-info
Cost-effective solution for the low-end performance range
OPC server for I/O interfacing over PROFINET included in
scope of supply
Order No.
SOFTNET PN IO Edition 2008

Software for PROFINET IO
controller with OPC server and
NCM PC; runtime software,
stick, Class A, for 32-bit Windows
XP Professional SP 2/3; Windows
2003 Server R2, SP2; Windows
German/English
Single license for one
installation
6GK1 704-1HW71-3AA0

6GK1 704-1HW00-3AL0
Z
Upgrade SOFTNET PN IO
from Edition 2006 to SOFTNET
PN IO Edition 2008
6GK1 704-1HW00-3AE0
Upgrade SOFTNET PN IO from Z

V6.0, V6.1, V6.2 or V6.3 to
SOFTNET PN IO Edition 2008
6GK1 704-1HW00-3AE1
7/11
Siemens AG 2009
Overview
The appropriate OPC servers are included in the scope of
supply of the respective communication software
Standardized, open multi-vendor interface
It permits interfacing of OPC-capable Windows applications to

S7-communication, open communication (SEND/RECEIVE),
PROFINET and SNMP.
OPC Scout with browser functionality as an OPC client and
OCX Data Control
PC/Windows PC
SIMATIC NET
OPC-Scout
WinCC
OPC-Client
Microsoft Office
OPC-Client
OPC XML
Webclient
COM/DCOM
Internet
Intranet
DP OPC server
FMS OPC server
S7 OPC server
S5 OPC server
PN IO OPC server
SNMP
OPC server
OPC XML-DA
as Web service
DP protocol
FMS protocol
S7 communication
Open
communication
(SEND/RECEIVE)
PROFINET
SNMP
PROFINET
Industrial Ethernet
S7-400
PROFIBUS
PC
S7-300
SIMATIC S5
(SEND/RECEIVE only)
ET 200pro
PC
System integration with OPC server
7/12
G_IK10_XX 10103
SIMATIC S5
Siemens AG 2009
Ordering data
Order No.
PN CBA OPC Server

Edition 2008
Order No.
SNMP OPC-Server Edition 2008
PROFINET OPC server

for CBA; runtime software,
stick, Class A, for 32-bit Windows
XP Professional SP 2, 3; Windows
German/English
6GK1 706-0HB71-3AA0

6GK1 706-0HB00-3AL0

to Edition 2008, single license
6GK1 706-0HB00-3AE0
Upgrade from V6.0

to Edition 2008, single license
6GK1 706-0HB00-3AE1
Including MIB compiler;

single license for 1 installation of
the runtime software,
on CD-ROM;
license key on USB stick, Class A,
for 32-bit Windows XP Professional SP 2, 3; Windows 2003
for CP 1612 / CP 1613 / CP 1623
German/English
Z
Basic 2008
Administration of
up to 20 IP addresses;
Single license for 1 installation
- Upgrade from Edition 2006
Z
to Edition 2008,
single license
- Upgrade from V6.0
Z
to Edition 2008,
single license
6GK1 706-1NW71-3AA0
Extended 2008
Administration of
up to 200 IP addresses
- Upgrade from Edition 2006
to Edition 2008,
single license
- Upgrade from V6.0
to Edition 2008,
single license
6GK1 706-1NX71-3AA0
6GK1 706-1NX00-3AE0
6GK1 706-1NX00-3AE1
Power Pack 2008;

Upgrade from SNMP OPCServer Basic to SNMP OPC
Server Extended Edition 2008
6GK1 706-1NX71-3AC0
6GK1 706-1NW00-3AE0
6GK1 706-1NW00-3AE1
7/13
Siemens AG 2009
PN CBA OPC server
Overview
Access to variables in PROFINET CBA components over the
OPC interface
Use of the objects and symbols defined using the PROFINET
engineering tool SIMATIC iMap and STEP 7
WinCC flexible
OPC client
SOFTNET-S7
SOFTNET-S7 Lean
S7-1613
Adding PROFINET functionality to existing installations. This

enables it to be used in parallel with other communication protocols such as S7 communication with SOFTNET-S7 for Industrial Ethernet.
OPC Scout as an OPC client with browser functions for the
variables of the PROFINET CBA components
Microsoft Office
OPC client
PN CBA OPC server
SIMATIC NET
OPC Scout
SOFTNET PN IO
S7 OPC server
PN CBA
OPC server
PN IO OPC server
S7 communication
PROFINET CBA
PROFINET IO
PROFINET
Industrial Ethernet
PROFINET
CBA
component
PROFINET
IO Devices
e.g. S7-300 with
CP 343-1 and
CP 343-5
IE/PB
Link
PN IO
e.g. S7-400
with
CP 443-1 Advanced
(76
PROFIBUS DP
PROFINET
IO Device
Data access
Data access via PROFIBUS DP
from viewpoint of PN IO OPC server
System integration with the PN CBA OPC server
7/14
6ZLWK
&3
,3&ZLWK &3/HDQ
&3 &3
&3 $GYDQFHG
PROFIBUS DP
ET 200S
from viewpoint of PN CBA OPC server
(7SUR
ET 200S
G_IK10_XX_10122
PROFINET
CBA
component
Siemens AG 2009
PN CBA OPC server
Ordering data
Order No.
Order No.
Software iMap V3.0
for configuring
PROFINET CBA
PN CBA OPC Server

Edition 2008
PROFINET OPC server for CBA;
Professional SP 2/3; Windows 2003
German/English
6GK1 706-0HB71-3AA0

6GK1 706-0HB00-3AL0
Upgrade PN CBA OPC Server Z

from Edition 2006 to PN CBA
OPC-Server Edition 2008
6GK1 706-0HB00-3AE0
Upgrade PN CBA OPC Server Z

from V6.0, V6.1, V6.2 or V6.3 to
PN CBA OPC Server Edition
2008
6GK1 706-0HB00-3AE1
Requirement:
Windows 2000 Prof.
with Service Pack 4 or later or
Windows XP Prof. with
Windows 2003 Server
with Service Pack 1 or later;
on PG or PC with Pentium
processor, min. 1 GHz;
STEP 7 V5.3 or later with
Service Pack 3,
PN OPC Server V6.3 or later
Type of supply:
German, English
with electronic documentation
Single license
6ES7 820-0CC04-0YA5
6ES7 820-0CC01-0YX2
Upgrade to V3.0, single license Z
6ES7 820-0CC04-0YE5
7/15
Siemens AG 2009
SNMP OPC server
Overview
Ordering data
Order No.
SNMP OPC Server Edition 2008

Including MIB compiler;
single license for 1 installation of
the runtime software, software
and electronic manual on CDROM; license key on USB flash
drive, Class A, for 32-bit Windows
German/English
Pumpstation Network
Pump Main
1GBit
Pump Old
S_IK10_XX_00004
Pump Substation 1
Status monitoring and network management of SNMP-capable devices in any OPC client systems; e.g. SIMATIC
HMI/SCADA, office application
Easy access to SNMP-capable devices over the OPC
interface
Devices without SNMP agents can be monitored using the
ping mechanism
Complete integration in the SIMATIC NET OPC server environment
SNMP can be implemented in parallel with other communications protocols such as PROFINET or S7 communication
Configuring with STEP 7 or NCM PC
Autodiscovery function for integrating accessible Ethernet
devices (STEP 7 V5.3+SP3 or higher)
Z
Basic 2008
Administration of
up to 20 IP addresses;
Single license for 1 installation
- Upgrade SNMP OPC-Server Z
Basic from Edition 2006 to
SNMP OPC Server Basic
Edition 2008
- Upgrade SNMP OPC Server Z
Basic from V6.0, V6.1, V6.2 or
V6.3 to SNMP OPC Server
Basic Edition 2008
6GK1 706-1NW71-3AA0
Z
Extended 2008
Administration of
up to 200 IP addresses
Extended from Edition 2006 to
SNMP OPC Server Extended
Edition 2008
Extended from V6.0, V6.1,
V6.2 or V6.3 to SNMP OPC
Server Extended Edition 2008
6GK1 706-1NX71-3AA0
Z
Power Pack 2008;
Upgrade from SNM OPC Server
Basic to SNM OPC Server
Extended Edition 2008
6GK1 706-1NX71-3AC0
6GK1 706-1NW00-3AE0
6GK1 706-1NW00-3AE1
6GK1 706-1NX00-3AE0
6GK1 706-1NX00-3AE1
7/16
Siemens AG 2009
Communications processors for PROFIBUS
Introduction
Overview
PC card with an internal microprocessor
Recommended solution for:
PC-based control systems
(Soft Control, PLC, Numeric Control, Robot Control)
Process control systems
Operator control and monitoring systems (HMI)
PROFIBUS DP slave interface (CP 5614 A2)
PROFIBUS plants with large quantity framework
(more than 8 stations)
Multi-protocol operation
Use of several CPs in one system
Designs with fiber-optic interface (FO)
PC card without an internal microprocessor
Recommended solution for:
Configuring tools (e.g. STEP 7)
PROFIBUS DP diagnostics station
(e.g. with COM PROFIBUS or as DP-Master Class 2)
PROFIBUS DP slave connection
PROFIBUS systems with up to 8 stations
Mono protocol mode
7/17
Siemens AG 2009
Overview
(PEHGGHG6\VWHPV
&3
3&,
'3
6
)06
62)71(7'3
62)71(7'3VODYH
62)71(76
62)71(7'3
62)71(7'3VODYH
62)71(76
62)71(7'3
62)71(7'3VODYH
62)71(76

60RGXODU(PEHGGHG&RQWUROOHU
ZLWK&3
%R[3&%
3DQHO3&%
3DQHO3&%ZLWK&3
0LFURER[%ZLWK&3
'.'3EDVH
:LQGRZV;3(PEHGGHG
6363)3ZLWK&3
0LFURER[%ZLWK&3
%R[3&%
%R[3&%
6,0$7,&,QGXVWULDO3&
5DFN3&%3DQHO3&%
2S
V\V
5DFN3&%
&3ZLWK'3%DVH
)LHOG3*0
&3$
&3)2
&3$
3&,ELW
:LQGRZVVHUYHU
2SHUDWLQJV\VWHPHQYLURQPHQW 6,0$7,&,QGXVWULDO3&
)LHOG3*
:LQGRZV6HUYHU563
:LQGRZV;33UR63
&RPPXQLFD
WLRQVKDUGZDUH
-
-
-
-
-
-
-

-
-
&3VDQGVRIWZDUHIRU352),%86
7
&3
3&,H[
&3
&DUGEXVELW
6,0$7,&3*3&
ZLWKLQWHJUDO
352),%86
,QWHUIDFH
62)71(7'3
62)71(7'3VODYH
62)71(76
1) Use of these CPs requires porting of the Development Kit DK-16xx PN IO to

the respective operating system environment. You can order
the DK-16xx PN IO on the Internet at www.siemens.de/simatic-net/dk16xx. It
contains sample software for Linux Suse 10 and Windows XP Professional. IRT operation requires an exclusive interrupt, which is not available
in all expansion slots. In the case of SIMATIC Industrial PC versions and integrated PROFINET interface, the additional use of CP 1616/CP 1604 has not
been released.
2) Use of these CPs in other operating system environment requires porting of the
Development Kit DK-5613 into the relevant operating system environment. You
can order the DK-5613 on the Internet at
3) Integrated PROFIBUS interface is optional
4) May be possible with restrictions, depending on the memory expansion and
processor performance.
5) Integrated PROFIBUS interface is optional in some cases
6) Requires at least 2 PCI or 2 PCIe slots (4-way redundancy requires
4 free PCI or 4 PCIe slots!); hybrid configurations with CP 1613 A2 (PCI) and
CP 1623 (PCIe) are possible, depending on PC configuration
7) Not possible for 677B in version with 1x PCI or 1x PCIe slot
8) No 4-way redundancy, as only 2 slots available
9) Depending on the slots of the selected PC version
7/18

n
n

-
-
-
-
Instructions
boundary conditions of use for the SIMATIC NET products.
These can be found on the Internet pages shown below.
- For further details on XP Embedded, see http://support.automation.siemens.com/WW/view/de/21661041
- Further details relating to system requirements and operating
environments can be found in the readme file of the communications products on the SIMATIC NET PC CD, Software Edition 2008 http://support.automation.siemens.com/WW/view/
de/31675909
updates to the above table can be viewed at http://www.siemens.com/simatic-net/ik-info
n
n
n

-
not suitable
suitable under
certain conditions
with SIMATIC NETCD Edition 2008
*B,.B;;B
&3$
3&,ELW

Siemens AG 2009
CP 5603
Overview
'36
)06
3*23
66
*B,.B;;B
'30
PCI104 interface card with microprocessor for connecting

embedded systems with PC/104Plus Interface to PROFIBUS
at up to 12 Mbit/s
Function compatible with CP 5613 A2
- PROFIBUS DP master conforming to IEC 61158/61784
- PG/OP communication with STEP 5 and STEP 7
- S7 communication
- Open communication (SEND/RECEIVE) based on the FDL
interface
- PROFIBUS FMS conforming to IEC 61158/61784
Extensive diagnostics options for installation, commissioning
and operation of the module
High performance via direct dual port RAM access
Event and filter mechanism for reducing the load on the host
CPU
Multiprotocol operation and parallel operation of up to 3 CPs
Use for motion control applications possible due to support of
the equidistant mode
The appropriate OPC server and configuration tools are included in the scope of delivery of the respective communication
software
Linux-based development kit with driver sources for integration into "non-Windows" environments
7/19
Siemens AG 2009
CP 5603
Ordering data
processor
Order No.
A
6GK1 560-3AA00
PCI104 card for connection to

PROFIBUS incl. DP-Base software with NCM PC; DP-RAM
interface for DP master, incl. PG
and FDL protocol; single license
on CD-ROM, Class A, Windows
XP Professional SP2/3; Windows
Windows XP Embedded SP2;
German/English
CP 5603 Mircobox Package
6GK1 560-3AU00
comprising CP 5603 module and

Microbox expansion rack
CP 5603 expansion rack
6GK1 560-3AA00-0AU0
for use in Microbox 420/427B with

mounting material
CP 5603 mEC Package
6GK1 560-3AE00
consisting of CP 5603 and insert

plate for CP 5603
CP 5603 insert plate
6GK1 560-3AA00-0AE0
Metal plate with RS485 cutout for

inserting for the S7 modular
embedded controller
Development Kit DK-5613

CP 5603/CP 5613/CP 5614/
CP 5613 A2/CP 5614 A2/
CP 5613 FO for integration into
other operating system environments on systems with an PCI slot
See http://www.siemens.com/
simatic-net/dk5613
DP-5613 Edition 2008

Software for DP, including PG and
FDL protocol, OPC server and
for CP 5603, CP 5613, CP 5613
A2, CP 5613 FO, CP 5614,
CP 5614 A2;
German/English
Order No.
Software for S7-communication,
including PG and FDL protocol,
OPC server and NCM PC; runtime
manual on USB flash drive,
Professional SP2/3; Windows
for CP 5603, CP 5613, CP 5613
A2, CP 5613 FO, CP 5614,
CP 5614 A2;
German/English
6GK1 713-5CB71-3AA0

for 1 year, with automatic
extension; requirement: Current
software version
6GK1 713-5CB00-3AL0
Upgrade S7-5613 Edition 2006 Z

to S7-5613 Edition 2008
6GK1 713-5CB00-3AE0

V6.1, V6.2 or V6.3 to S7-5613
Edition 2008
6GK1 713-5CB00-3AE1
FMS-5613 Edition 2008

Software for FMS protocol,
including PG/OP communication,
FDL, FMS-OPC server and NCM
PC; runtime software, software and
electronic manual on USB flash
drive, Class A for 32-bit Windows
XP Professional SP2/3, Windows
2003 Server R2, SP2, Windows
Windows 2008 Server; for CP 5603,
CP 5613, CP 5613 A2, CP 5613 FO,
CP 5614, CP 5614 A2;
German/English
6GK1 713-5FB71-3AA0

software version
6GK1 713-5FB00-3AL0
Z
Upgrade FMS-5613 Edition
2006 to FMS-5613 Edition 2008
6GK1 713-5FB00-3AE0
Upgrade FMS-5613 from V6.0, Z

V6.1, V6.2 or V6.3 to FMS-5613
Edition 2008
6GK1 713-5FB00-3AE1
6GK1 500-0FC10
6GK1 713-5DB71-3AA0
PROFIBUS FastConnect bus

connector RS 485 Plug 180

software version
6GK1 713-5DB00-3AL0
with 180 cable outlet
Upgrade DP-5613 from Edition Z

2006 to DP-5613 Edition 2008
6GK1 713-5DB00-3AE0
Upgrade DP-5613 from V6.0,

V6.1, V6.2 or V6.3 to DP-5613
Edition 2008
6GK1 713-5DB00-3AE1
PROFIBUS Busterminal 12M
6GK1 500-0AA10
Bus terminal for connection of

PROFIBUS stations at up to
12 Mbit/s with plug-in cable

7/20
Siemens AG 2009
CP 5613 A2
Overview
'36
)06
23&
3*23
66
*B,.B;;B
'30
PCI card (universal keyed 5 V/3.3 V) with microprocessor for

system connection for PCs and SIMATIC PG/PC to PROFIBUS
with up to 12 Mbit/s
- PROFIBUS DP-Master according to IEC 61158/EN 50170
- S7 communication
- Open communication (SEND/RECEIVE) based on the
FDL interface
- PROFIBUS FMS acc. to IEC 61158/EN 50170
Comprehensive diagnostics possibilities for installation,
commissioning and operation of the module
High performance over direct dual-port RAM access
Event and filter mechanisms to reduce the loading on the host
CPU
Multi-protocol mode and parallel operation of up to 4 CPs
Implementation in Motion Control applications is possible
because a constant bus cycle time is supported
The appropriate OPC servers and configuration tools are
included in the scope of supply of the respective communications software.
7/21
Siemens AG 2009
CP 5613 A2
Ordering data
Order No.
6GK1 561-3AA01
CP 5613 A2
communications processor

Professional SP2/3, Windows 2003
Server, R2, SP2, Windows Vista
Business/Ultimate SP1; Windows
2008 Server; for CP 5613,
CP 5613 A2, CP 5613 FO, CP 5614,
CP 5614 A2;
German/English
PCI card (32-bit; 3.3 V/5 V)

for connection to PROFIBUS
including DP-Base software with
NCM PC; DP-RAM interface for
DP master, including PG and FDL
protocol; single license for 1
on CD-ROM, Class A, Windows
German/English
Software-Upgrade
6GK1 713-5CB71-3AA0
6GK1 561-3AA01-3AE0

1 year, with automatic extension;
version
6GK1 713-5CB00-3AL0
see
simatic-net/dk5613

2006 to S7-5613 Edition 2008
6GK1 713-5CB00-3AE0

V6.1, V6.2 or V6.3
6GK1 713-5CB00-3AE1
6GK1 713-5FB71-3AA0

version
6GK1 713-5FB00-3AL0
Upgrade FMS-5613 from Edition Z

2006 to FMS-5613 Edition 2008
6GK1 713-5FB00-3AE0
Upgrade FMS-5613
from V6.0, V6.1, V6.2 or V6.3
to FMS-5613 Edition 2008
6GK1 713-5FB00-3AE1
for CP 5613 A2 and CP 5613 FO

from V6.0 to 2008 Edition
CP 5613/CP 5614/
CP 5613 A2/CP 5614 A2/
CP 5613 FO for integration in
other operating system environments on systems with a PCI slot

PC; runtime software, software
and electronic manual on USB
flash drive, Class A for 32-bit
Windows XP Professional SP2/3,
Windows 2003 Server R2, SP2,
for CP 5613, CP 5613 A2,
CP 5613 FO, CP 5614,
CP 5614 A2;
German/English
Order No.

for CP 5613, CP 5613 A2, CP
5613 FO, CP 5614, CP 5614 A2,
German/English
6GK1 713-5DB71-3AA0

version
6GK1 713-5DB00-3AL0

2006 to DP-5613 Edition 2008
6GK1 713-5DB00-3AE0
Upgrade DP-5613 from V6.0,

V6.1, V6.2 or V6.3
to DP-5613 Edition 2008
6GK1 713-5DB00-3AE1
PROFIBUS FastConnect
bus connector RS 485
Plug 180
6GK1 500-0FC10
With 180 cable outlet

PROFIBUS bus terminal 12M
6GK1 500-0AA10
Bus terminal for connection

of PROFIBUS stations up to
7/22
Siemens AG 2009
CP 5613 FO
Overview
'36
)06
23&
3*23
66
*B,.B;;B
'30
PCI card with microprocessor for system connection for PCs

and SIMATIC PGs/PC to the optical PROFIBUS at up to
12 Mbit/s
Integrated fiber-optic interface for FO direct connection
- PROFIBUS DP master according to IEC 61158/EN 50170
- S7 communication
FDL interface
Event and filter mechanisms to reduce the loading on the host
CPU
Implementation in Motion Control applications is possible
7/23
Siemens AG 2009
CP 5613 FO
Ordering data
CP 5613 FO
Order No.
Z
6GK1 561-3FA00

manual on USB stick, Class A,
for 32-bit Windows XP Professional SP2/3, Windows 2003 Server,
R2, SP2, Windows Vista Business/Ultimate SP1; Windows
CP 5613 A2, CP 5613 FO,
CP 5614, CP 5614 A2
German/English
PCI card (32-bit; 5 V) for

connection to optical PROFIBUS
including DP-base software with
NCM PC; DP-RAM interface for
DP master, including PG and FDL
protocol; single license for 1
on CD-ROM, Class A, for 32-bit,
German/English
Software-Upgrade
6GK1 713-5CB71-3AA0
6GK1 561-3AA01-3AE0

version
6GK1 713-5CB00-3AL0
siehe http://www.siemens.com/
simatic-net/dk5613

2006 to S7-5613 Edition 2008
6GK1 713-5CB00-3AE0
Z
Upgrade S7-5613
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 713-5CB00-3AE1

from V6.0 to Edition 2008
Software Development Kit for
CP 5613/CP 5614/CP 5613 A2/
CP 5614 A2/CP 5613 FO for
integration in other operating
system environments on systems
with a PCI slot

stick, Windows XP Professional
SP2/3, Windows 2003 Server R2,
SP2, Windows Vista Business/
Ultimate SP1; Windows 2008
Server; for CP 5613, CP 5613 A2,
CP 5613 FO, CP 5614,
CP 5614 A2,
German/English
Order No.

SP2/3, Windows 2003 Server, R2,
SP2, Windows Vista Business/Ultimate SP1; Windows 2008 Server;
for CP 5613, CP 5613 A2, CP
5613 FO, CP 5614, CP 5614 A2,
German/English
6GK1 713-5DB71-3AA0

version
6GK1 713-5DB00-3AL0

2006 to DP-5613 Edition 2008
6GK1 713-5DB00-3AE0
Z
Upgrade DP-5613
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 713-5DB00-3AE1
6GK1 713-5FB71-3AA0

version
6GK1 713-5FB00-3AL0
Upgrade FMS-5613 from

Edition 2006 to FMS-5613
Edition 2008
6GK1 713-5FB00-3AE0
Upgrade FMS-5613 from V6.0, Z

V6.1, V6.2 or V6.3 to
6GK1 713-5FB00-3AE1
7/24
Siemens AG 2009
CP 5614 A2
Overview
'36
)06
23&
3*23
66
*B,.B;;B
'30
PCI card (universal keyed 5 V/3.3 V) with microprocessor for

system connection for PCs and SIMATIC PG/PC to PROFIBUS
with up to 12 Mbit/s
- PROFIBUS DP master and slave interface according to
IEC 61158/ EN 50170 on one PCI card
- S7 communication
FDL interface
Event and filter mechanisms to reduce the loading on the host CPU
Implementation of Motion Control applications is possible
7/25
Siemens AG 2009
CP 5614 A2
Ordering data
Order No.
6GK1 561-4AA01
CP 5614 A2

Class A, Windows XP Professional
SP2, Windows Vista Business/Ultimate SP1; Windows 2008 Server;
for CP 5613, CP 5613 A2, CP 5613
FO, CP 5614, CP 5614 A2,
German/English
PCI card (32-bit; 3.3 V/5 V)

master and slave interface to
PROFIBUS including DP-Base
software with NCM PC; DP-RAM
interface for DP master, including
PG and FDL protocol; single
license for 1 installation, runtime
manual on CD-ROM, Class A,
German/English
Software Upgrade
6GK1 561-3AA01-3AE0

from V6.0 to Edition 2008
siehe http://www.siemens.com/
simatic-net/dk5613

CP 5613/CP 5614/
CP 5613 A2/CP 5614 A2/
CP 5613 FO for integration in
other operating system environments on systems with a PCI slot
6GK1 713-5CB71-3AA0

version
6GK1 713-5CB00-3AL0

2006 to S7-5613 Edition 2008
6GK1 713-5CB00-3AE0
Upgrade S7-5613
from V6.0, V6.1, V6.2 or V6.3
6GK1 713-5CB00-3AE1
6GK1 713-5FB71-3AA0

version
6GK1 713-5FB00-3AL0

flash drive, Class A for 32-bit
Windows 2003 Server R2, SP2,
for CP 5613, CP 5613 A2,
CP 5613 FO, CP 5614,
CP 5614 A2,
German/English
Order No.

for CP 5613, CP 5613 A2, CP
5613 FO, CP 5614, CP 5614 A2,
German/English
6GK1 713-5DB71-3AA0

version
6GK1 713-5DB00-3AL0

2006 to DP-5613 Edition 2008
6GK1 713-5DB00-3AE0
Upgrade DP-5613
from V6.0, V6.1, V6.2 or V6.3
to DP-5613 Edition 2008
6GK1 713-5DB00-3AE1
Upgrade FMS-5613 from

Edition 2006 to FMS-5613
Edition 2008
6GK1 713-5FB00-3AE0
Upgrade FMS-5613
from V6.0, V6.1, V6.2 or V6.3
to FMS-5613 Edition 2008
6GK1 713-5FB00-3AE1
Plug 180
6GK1 500-0FC10

6GK1 500-0AA10
Bus terminal for connection of

PROFIBUS stations up to 12
Mbit/s with plug-in cable
7/26
Siemens AG 2009
CP 5512
Overview
'36
)06
23&
3*23
66
*B,.B;;B
'30
For the connection of PG/PC and notebooks using PC-card

slot (CardBus 32-bit) to PROFIBUS and MPI of the SIMATIC S7
- PROFIBUS DP Master Class 1 incl. acyclic DP expansions
with SOFTNET-DP
with SOFTNET-DP
- PROFIBUS DP slave with SOFTNET-DP slave
- S7 communication with SOFTNET-S7
- Open communication (SEND/RECEIVE on basis of the FDL
interface) with SOFTNET-DP or SOFTNET-S7
PC card Type II (CardBus 32-bit); for programming device/PC
with PC card slot and notebooks
- Can be used with:
STEP 7 and NCM PC; (ProTool, Micro/Win, ProTool/Pro,
SIMATIC PDM for PG/OP communication)
- SOFTNET-S7 (for S7-communication)
- SOFTNET-DP, SOFTNET-DP slave (for DP)
7/27
Siemens AG 2009
CP 5512
Ordering data
Order No.
CP 5512
6GK1 551-2AA00
PC-Card (CardBus, 32-bit) for

connection of a programming
device or notebook to PROFIBUS
or MPI, under 32 bit in connection
with PROFIBUS SOFTNET
software or STEP 7;
German/English
Order No.
SOFTNET-DP Slave
Edition 2008
Software for DP slave, with
DP-OPC server and NCM PC;
single license for 1 installation,
license key on USB stick, Class A
for 32-bit Windows XP Professional SP2/3; Windows 2003 Server
R2, SP2; Windows Vista Business/Ultimate SP1; Windows
CP 5611, CP 5611 A2, CP 5621
German/English
SOFTNET-S7 Edition 2008

including FDL protocol with OPC
on USB flash drive, Class A,
CP 5611, CP 5611 A2, CP 5621
German/English
6GK1 704-5CW71-3AA0

version
6GK1 704-5CW00-3AL0
Upgrade SOFTNET-S7 from

Edition 2006 to SOFTNET-S7
Edition 2008
6GK1 704-5CW00-3AE0
Upgrade SOFTNET-S7
from V6.0, V6.1, V6.2 or V6.3
to SOFTNET-S7 Edition 2008
6GK1 704-5CW00-3AE1
6GK1 704-5DW71-3AA0

version
6GK1 704-5DW00-3AL0
6GK1 704-5SW71-3AA0
Software Update Service for 1

version
6GK1 704-5SW00-3AL0
Z
Upgrade SOFTNET-DP Slave
from Edition 2006 to
SOFTNET-DP Slave Edition 2008
6GK1704-5SW00-3AE0
Z
from V6.0, V6.1, V6.2 or V6.3 to
SOFTNET-DP Slave
Edition 2008
6GK1704-5SW00-3AE1
Plug 180
6GK1 500-0FC10

PROFIBUS adapter for CP 5512
C79459-A1890-A10
SOFTNET-DP Edition 2008
Software for DP protocol (Master

Class 1 and 2) including FDL
protocol with OPC server and
flash drive, Class A, for 32-bit,
SP1; Windows 2008 Server,
for CP 5512, CP 5611,
CP 5611 A2, CP 5621;
German/English
Upgrade SOFTNET-DP from

Edition 2006 to SOFTNET-DP
Edition 2008
6GK1 704-5DW00-3AE0
Upgrade SOFTNET-DP
from V6.0, V6.1, V6.2 or V6.3
to SOFTNET-DP Edition 2008
6GK1 704-5DW00-3AE1
7/28
Siemens AG 2009
CP 5611 A2
Overview
'36
)06
23&
3*23
66
*B,.B;;B
'30
PCI card (universal-keyed 5 V/3.3 V) for connecting PCs and

SIMATIC PG/PC to PROFIBUS at up to 12 Mbit/s and to the
MPI interface of SIMATIC S7
with SOFTNET-DP
with SOFTNET-DP
- Open communication (SEND/RECEIVE on basis of the
FDL interface) with SOFTNET-DP or SOFTNET-S7
Can be used with:
- STEP 7, STEP 7-Micro/Win, ProTool, ProTool/Pro,
SIMATIC PDM (for PG/OP communication)
- COM PROFIBUS
7/29
Siemens AG 2009
CP 5611 A2
Ordering data
Order No.
CP 5611 A2
PCI card (32-bit, 3.3 V/5 V,
33/66 MHz) for connection of
a programming device or PC
to PROFIBUS
6GK1 561-1AA01
A
PCI card (32-bit)
CP 5611 A2 and MPI cable, 5 m
6GK1 561-1AM01

on USB stick, Class A, for 32-bit
Windows 2003 Server, R2, SP2,
SP1; Windows 2008 Server, for
CP 5512, CP 5611, CP 5611 A2,
CP 5621
German/English
6GK1 704-5CW71-3AA0

version
6GK1 704-5CW00-3AL0

Edition 2008
6GK1 704-5CW00-3AE0
Z
Upgrade SOFTNET-S7
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 704-5CW00-3AE1
6GK1 704-5DW71-3AA0

version
6GK1 704-5DW00-3AL0
6GK1 704-5DW00-3AE0
Z
Upgrade SOFTNET-DP
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 704-5DW00-3AE1

7/30
6GK1 704-5SW71-3AA0

version
6GK1 704-5SW00-3AL0
Z
from Edition 2006 to SOFTNETDP Slave Edition 2008
6GK1 704-5SW00-3AE0
Z
from V6.0, V6.1, V6.2 or V6.3 to
SOFTNET-DP Slave
Edition 2008
6GK1 704-5SW00-3AE1
Plug 180
6GK1 500-0FC10

of PROFIBUS stations up to

Server, for CP 5512, CP 5611,
CP 5611 A2, CP 5621
German/English

Edition 2008
Software for DP Slave, with

for 32-bit Windows XP Professional SP2/3,Windows 2003 Server,
CP 5611, CP 5611 A2, CP 5621
German/English
Order No.
SOFTNET-DP Slave
Edition 2008
6GK1 500-0AA10
Siemens AG 2009
CP 5621
Overview
'36
)06
23&
3*23
66
*B,.B;;B
'30
PCI Express x1 card for connection of PCs and SIMATIC

PG/PC to PROFIBUS at up to 12 Mbit/s and to the MPI of the
SIMATIC S7
with SOFTNET-DP
with SOFTNET-DP
- Open communication (SEND/RECEIVE on basis of the
FDL interface) with SOFTNET-DP or SOFTNET-S7
Can be used with:
- STEP 7, STEP 7-Micro/Win, ProTool, ProTool/Pro,
SIMATIC PDM (for PG/OP communication)
- COM PROFIBUS
included in the scope of supply of the respective communication software.
7/31
Siemens AG 2009
CP 5621
Ordering data
Order No.
CP 5621
PCI Express x1 card (32-bit) for E
connection of a PG or PC to
PROFIBUS
6GK1 562-1AA00
PCI Express x1 card (32-bit)

CP 5621 and MPI cable, 5 m
6GK1 562-1AM00

CP 5512, CP 5611, CP 5611 A2,
CP 5621
German/English

CP 5611, CP 5611 A2, CP 5621
German/English
6GK1 704-5SW71-3AA0

version
6GK1 704-5SW00-3AL0
Z
6GK1 704-5SW00-3AE0
6GK1 704-5CW71-3AA0

version
6GK1 704-5CW00-3AL0
Z
from V6.0, V6.1, V6.2 or V6.3 to
SOFTNET-DP Slave
Edition 2008
6GK1 704-5SW00-3AE1
6GK1 704-5CW00-3AE0
Plug 180
6GK1 500-0FC10
Z
Upgrade SOFTNET-S7
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 704-5CW00-3AE1
with 180 cable outlet

Edition 2008

CP 5611 A2, CP 5621
German/English
6GK1 704-5DW71-3AA0

version
6GK1 704-5DW00-3AL0

Edition 2008
6GK1 500-0AA10

of PROFIBUS stations at up to
12 Mbit/s with connecting cable
Order No.
SOFTNET-DP Slave
Edition 2008
6GK1 704-5DW00-3AE0
Z
Upgrade SOFTNET-DP
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 704-5DW00-3AE1

7/32
Siemens AG 2009
SOFTNET for PROFIBUS
Overview
Software for coupling PCs/programming devices and notebooks to programmable controllers
- PROFIBUS DP Master Class 1 and 2 with acyclic expansions
- PROFIBUS DP slave
- S7 communication
FDL interface
3&,3&PLW
&3$&3&3
XQG62)71(7IU352),%86
352),%86
6PLW
&3
*B,.B;;B
6
PLW&3
RGHU&3
68ELV8
PLW&3)06'3
'36
)06
23&
3*23
66
*B,.B;;B
'30
Ordering data
Order No.
Order No.
6GK1 704-5DW71-3AA0

CP 5512, CP 5611, CP 5611 A2,
CP 5621
German/English

version
6GK1 704-5DW00-3AL0

Edition 2008
6GK1 704-5DW00-3AE0
Z
Upgrade SOFTNET-DP
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 704-5DW00-3AE1
SOFTNET-DP Slave Edition 2008
6GK1 704-5CW71-3AA0

version
6GK1 704-5CW00-3AL0

Edition 2008
6GK1 704-5CW00-3AE0
Z
Upgrade SOFTNET-S7
from V6.0, V6.1, V6.2 or V6.3 to
6GK1 704-5CW00-3AE1

CP 5611, CP 5611 A2, CP 5621
German/English
6GK1 704-5SW71-3AA0

CP 5611 A2, CP 5621
German/English

version
6GK1 704-5SW00-3AL0
Z
6GK1 704-5SW00-3AE0
Z
from V6.0, V6.1, V6.2 or V6.3 to
SOFTNET-DP Slave
Edition 2008
6GK1 704-5SW00-3AE1
7/33
Siemens AG 2009
OPC server for PROFIBUS
Overview
Standardized, open multi-vendor interface
Interfacing of OPC-capable Windows applications to
DP, FMS, S7 communication and open communication
(SEND/RECEIVE) based on the FDL interface
OPC Scout with browser functionality as an OPC client and

OCX Data Control
The relevant OPC servers are supplied with each communication software package
PC/Windows PC
SIMATIC NET
OPC Scout
WinCC
OPC Client
Microsoft Office
OPC Client
OPC XML
Webclient
COM/DCOM
Internet
Intranet
DP OPC server
FMS OPC server
S7 OPC server
S5 OPC server
PN IO OPC server
SNMP
OPC server
OPC XML-DA
as Web service
DP protocol
FMS protocol
S7 communication
Open
communication
(SEND/RECEIVE)
PROFINET
SNMP
PROFINET
Industrial Ethernet
S7-400
PROFIBUS
PC
S7-300
7
SIMATIC S5
(SEND/RECEIVE only)
ET 200pro
PC
System integration with OPC server
7/34
G_IK10_XX 50700
SIMATIC S5
Siemens AG 2009
Engineering Tools
SINEMA E
Overview
Engineering tool for support with planning, configuration,
simulation and measurement of an IWLAN radio field on site
(Site Survey) according to the IEEE 802.11 a/b/g/h standard
Automatic determination of the WLAN infrastructure for new
and existing networks
Optimization functions for minimization of channel interference
Visualization and analysis of WLAN networks according to
signal strength, data rate, signal-to-noise ratio, overlapping
and applications (PROFINET, TCP/IP, Voice over WLAN)
Configuration of single and multiple devices as well as uploading/downloading of IWLAN device parameters
Site survey functions (measurements) for the acquisition,
conditioning, evaluation and visualization of measured WLAN
signals
Integrated and expandable catalog entries for WLAN devices,
antennas and radio hindrances as well as standard graphics
formats for importing layout plans
Report function for documenting the configured and
measured WLAN infrastructure
Application
SINEMA E (SIMATIC Network Manager Engineering) is the
generic term for the engineering of network products such as
SCALANCE W.
7HFKQLFDOFODULILFDWLRQ
3ODQQLQJ
&RPPLVVLRQLQJ
0DLQWHQDQFH 6HUYLFH
7
,QVWDOODWLRQV
SHUVRQQHO
3ODQQHU
3URMHFWHQJLQHHU
&RPPLVVLRQLQJ
HQJLQHHUV
2IIOLQH
6HUYLFH
2QOLQH
G_IK10_XX_10209
&XVWRPHU
Application diagram of the SINEMA E software for planning and measuring WLAN networks
7/35
Siemens AG 2009
Engineering Tools
SINEMA E
Application (continued)
SINEMA E 2006 contains the following functions for the
engineering of IWLAN networks:
Technical clarification
Wizard-supported tender preparation
Planning
Measurement (site survey) of an existing WLAN network
Planning, simulation, and optimization of a WLAN infrastructure
Simultaneous configuring of device groups
Generation of a report with installation guidelines
Start-up
Identification, upload/download from devices
Measurement (site survey) for verification and optimization of
planning
Report for final documentation
Maintenance and service
Optimization and fault rectification with the help of measurements (site survey)
The functional scope of the software is subdivided into "lean"
and "standard" licenses. With the standard license, additional
functions are possible for the acquisition, evaluation and visualization of measured WLAN signals (site survey) as well as extended simulation and planning (automatic placement, contour presentation, storage/comparison of simulations, extended filter
options).
Ordering data
Order No.
SINEMA E
Engineering software for
planning, configuring, simulating
and measuring (Site Survey)
industrial WLAN applications in
office and industrial environments on PG/PC in accordance
with the 802.11 a/b/g/h standard;
on CD-ROM, license key on
diskette, Class A, for 32-bit
Windows XP Professional +SP2;
German/English
Z
SINEMA E 2006 Lean
Planning, configuring and
simulating WLAN applications
6GK1 781-0AA00-6AA0
Z
SINEMA E 2006 Standard
Extended planning, configuring,
simulating and measuring
(site survey) of WLAN applications (automatic placement,
application profile, contour
presentation, storage/comparison of simulations, extended
filter options)
6GK1 782-0AA00-6AA0
SINEMA E 2006 Powerpack

Software upgrade from
SINEMA E Lean to
SINEMA E Standard
6GK1 782-4AA00-6AC0
Weitere Info
You can find further information in the Internet at:
http://www.siemens.com/sinema
or at
http://support.automation.siemens.com/
WW/view/com/23162466/133400
7
7/36
Siemens AG 2009
Distributed I/O
SIMATIC ET 200
8/2
Introduction
8/3
Distributed configuration without

control cabinet
SIMATIC ET 200pro
SIMATIC ET 200eco
8/3
8/3
8/4
8/4
8/4
8/5
8/5
Distributed configuration
with control cabinet
SIMATIC ET 200S
SIMATIC ET 200S COMPACT
SIMATIC ET 200M
SIMATIC ET 200iSP
Siemens AG 2009
Distributed I/O
Introduction
Overview
PC
Server
Industrial Ethernet
Microbox
+ WinAC RTX 2008
PROFIBUS
ET 200isp
ET 200eco
PROFINET
ET 200S
ET 200pro
ET 200S
COMPACT
ET 200M
Connection of distributed I/O stations to PC-based control/SIMATIC PC via PROFIBUS
Input/output modules can be connected to SIMATIC PC via

distributed I/O stations SIMATIC ET 200, PROFIBUS and
PROFINET. On the PC, integrated interfaces or communications
processors for PROFIBUS are used.
Distributed configuration:
- I/O stations with input/output modules next to fhe sonsors
and actuators on site
- Connection between PC-based / Embedded controllers,
I/O modules and other field devices via a single cable, the
fieldbus
The distributed I/O stations SIMATIC ET 200 are consistent,
powerful and flexible which offers solutions for almost every
automation task.
8/2
They offer a complete range of modules from compact to

bit-modular for the perfect fit in control cabinets or complete
solutions without a control cabinet.
SIMATIC ET 200 offers more than distributed inputs and
outputs:
From motor starters, frequency link converters to safety
systems, from technological modules and pneumatic
components to real CPU functionality all functions are
perfectly integrated.
The integrated optical interfaces at ET 200S and ET 200M
make the economical connection to the fiber-optic cables
possible.
Detailed information is available in the following catalogs
Industrial Communication and Field Devices (IK PI),
Automation and Drives (CA 01),
Low Voltage Controlgear, Switchgear and Systems (NS K),
Online on the Internet at
Siemens AG 2009
Distributed I/O
Distributed configuration without control cabinet
SIMATIC ET 200pro, ET 200eco
Overview
SIMATIC ET 200pro
Distributed I/O system with degree of protection IP65/67
for applications at the machine level without a cabinet
Compact, multifunctional all-in-one solution: analog and
digital inputs/outputs, fail-safe modules, motor starters up
to 5.5 kW, etc.
Communication via PROFIBUS or PROFINET
Mixed configuration of fail-safe modules and standard
modules possible in one and the same station
New interface module IM 154-8 CPU with CPU functionality
based on the CPU 315-2 PN/DP with 2 integrated communication interfaces (one combined MPI/DP interface and one
PROFINET interface with three ports)
Free choice of connection method:
direct, ECOFAST or M12 7/8
Power module for easy implementation of load groups
Module replacement during normal operation (hot swapping)
Easy installation as well as independent wiring
Extensive diagnostics: Module-specific or channel-specific
Intelligent motor starters for starting and protecting motors
and loads to 5.5 kW
- Versions: direct starters and reversing starters standard
and high-feature
Analog electronic modules for connecting different types of
temperature probes
Frequency converter up to 1.5 kW with or without integrated
safety functions (Safety)
RFID communication module RF 170C for connection of
Siemens RFID systems
Use of ET 200pro for standard pneumatic applications with
PM 148-P
SIMATIC ET 200eco
Compact, inexpensive I/O for processing digital signals
Designed without a control cabinet with IP65/IP67 degree of
protection and flexible quick connection technology
Comprises a basic module and various terminal blocks for
application-specific implementation options:
- ECOFAST: 2 x hybrid fieldbus interfaces with ID connector
for setting PROFIBUS addresses
- M12: 2 x M12 and 2 x 7/8" with 2 rotary coding switches for
setting PROFIBUS addresses
Terminal block comprising T functionality for bus and power
supply, so that during commissioning and servicing, the
modules can be removed from and reconnected to the
PROFIBUS without interrupting operation
Module versions: 8 DI, 16 DI, 8 DI/8 DO (1.3 A),
8 DI/8 DO (2.0 A), 8 DO (2.0 A), 16 DO (0.5 A)
Transmission rates up to 12 Mbit/s
Fail-safe DI modules with safety-related signal processing
according to PROFIsafe
8/3
Siemens AG 2009
Distributed I/O
Distributed configuration with control cabinet
SIMATIC ET 200S, ET 200S COMPACT
Overview
SIMATIC ET 200S
Distributed I/O systems in IP20 degree of protection with low
wiring costs, particularly suitable for extremely time-critical
tasks, e.g. fast closed-loop control
Bit-modular design for precise adaptation to the automation
task
New 8-channel digital I/O module for even more compact
design
Communication via PROFIBUS or PROFINET
Combination of digital and analog input/output modules,
power modules, motor starters and frequency converter for
control of drives up to 7.5 or 4 kW
With integrated CPU on PROFIBUS and PROFINET (new) for
preprocessing directly in the field
Replacement of electronic modules during operation
(hot swapping)
Channel precision diagnostics for high availability
Optional integrated fiber-optic interface
Fast connect as the connectors do not have to be stripped
Ex approval according to category 3 for zone 2 to ATEX 100a
Slot reservation using spare modules
PROFIBUS DP master interface module for use as subordinate
PROFIBUS master
Fail-safe DI modules with safety-related signal processing
according to PROFIsafe
SIMATIC ET 200S COMPACT
Block I/O in degree of protection IP20 with 32 channels,
comprising terminal block and electronics block
2 selectable options one station with 32 DI or mixed station
with 16 DI and 16 DO
Bit-modular expansion to up to 128 channels or a maximum of
12 modules
Entire ET 200S module range can be used (except F modules)
The basis of the block I/O is the interface module ET 200S
BASIC
Separation of connections and electronics with fixed wiring
Screw-type or spring-loaded connections
Standard terminal block with 2-wire terminals; 3-wire and
4-wire terminals using add-on terminals or standard terminal
strips
Installation on DIN rail
Hot swapping for the expansion modules
Up to 100 bytes of inputs and outputs (address space)
8/4
Siemens AG 2009
Distributed I/O
Distributed configuration with control cabinet
SIMATIC ET 200M, ET 200iSP
Overview
SIMATIC ET 200M
Modular I/O system with degree of protection IP20,
particularly suitable for user-specific and complex
automation tasks.
Can be expanded with S7-300 automation system signal,
communication and function modules
Applicable Ex analog input or output modules with HART
optimize the ET 200M for use in process engineering.
Can be used in redundant systems (S7-400H, S7-400F/FH)
Comprises a field bus interface module IM 153 (for PROFIBUS
or PROFINET), up to 12 S7-300 I/O modules (set up with bus
connectors or active bus modules) and, if applicable, a power
supply unit.
Ultra-compact design with new digital I/O modules with
64 channels
Modules can be replaced during operation (hot swapping)
with the bus modules active
Can be supplied with integrated fiber optic interface if
required
PROFIBUS transmission rates up to 12 Mbit/s
Ex approval to Cat. 3 for Zone 2 acc. to ATEX100a
Failsafe digital inputs and outputs as well as analog inputs for
safety-related signal processing according to PROFIsafe on
PROFIBUS.
SIMATIC ET 200iSP
Failsafe distributed I/O system to degree of protection IP30 for
use in hazardous gaseous and dusty areas, i.e. in Zones 1 and
2 as well as 21 and 22
Sensors and actuators can also be situated directly in
Zone 0 or 20.
Individual configuration and flexible expansion with the
modular design for optimization to the respective automation
task
Independent wiring enables prewiring without the electronics
connected
Optimized for integration into process control systems
(e.g. SIMATIC PCS 7)
Parameters can be assigned using SIMATIC PDM
Optimal integration of HART field devices
(HART transparency)
Connection to PROFIBUS DP via isolating transformers
Module replacement (hot swapping) and configuration
expansion (Configuration in Run) possible during operation
Extensive diagnostics possibilities
Condensation-proof modules in temperature range
-20 C +60 C
Full redundancy of PROFIBUS and power supply
8/5
Siemens AG 2009
Distributed I/O
7
8/6
Siemens AG 2009
9/2
Introduction
9/4
9/4
9/7
Industrial LCD Monitors

SIMATIC Flat Panel
SCD Monitors
9/13
9/14
9/14
9/15
9/16
Input devices
Keyboards
SIMATIC PC mouse
Operating channel extensions
9/17
9/17
9/18
Printers
Matrix printers T 2240, T 2340
Matrix printers 2150, 2250
Siemens AG 2009
Introduction
Overview
SIMATIC Flat Panel
The flat panels are used wherever the PC computer unit and the
operator control/display unit have to be installed separately for
technical reasons or to suit the application. SIMATIC Flat Panels
are suitable for direct connection to any PC, but are especially
suitable for use with the SIMATIC Box or SIMATIC Rack PC.
SIMATIC Flat Panels are LCD monitors with a rugged industrial
design with 12, 15, 17 and 19 TFT displays.
Installation method:
Equally suitable for installation in the machine, control
cabinets, consoles and booms, or 19" racks.
As a device with all-round IP65 protection for mounting on a
supporting arm/supporting foot
Type of operator control:
Devices for display only without operator functionality
As option devices for with touch operation
Rear connection of I/O devices (optional)
SCD Monitors
The SCD 1297, SCD 1597, SCD 1997 monitors are LCD monitors
in a rugged industrial design.
Built-in versions:
Desktop units (19" display)
Built-in units (for control cabinets, consoles and booms)
19" rack-mounted units
Devices for display only
Devices for touch operation
Devices for keyboard/mouse operation
(only 19" rack-mounted units)
9/2
Siemens AG 2009
Introduction
The SIMATIC PC USB FlashDrive is the ideal mobile storage
medium for SIMATIC PCs/PGs and SINUMERIK components.
Thanks to the rugged and ultracompact design in a metal
housing, the fast data transfers (USB 2.0) and the high memory
capacity of 2 GB, it is ideally suited for use in industrial applications.
Input devices
The range of input devices includes keyboards, the SIMATIC PC
mouse and operation channel extensions.
Various types of keyboard are available, e.g. as desktop or
19" rack-mountable units, with touchpad or trackball.
Operation channel extensions for mouse and keyboard are
active.
All input devices are designed for industrial use.
Printers
The range of industrial printers comprises matrix needle printers.
An extensive offering of matching accessories is also available.
All printers are suitable for the use in a rough industrial environment and are therefore adequately protected against environmental influences.
9/3
Siemens AG 2009
SIMATIC Flat Panel
Overview
Design
Rugged aluminum front
TFT display in following sizes:
- 12" / 800 x 600 pixels
- 15" / 1024 x 768 pixels
- 17" / 1280 x 1024 pixels
- 19" / 1280 x 1024 pixels
256K up to 16 million colors
Anti-glare and hardened mineral glass screen
Basic display or touch screen option
24 V DC power supply, also optional with 100-240 V AC
(50/60Hz)
Can be located up to 5 m from the computing unit
The Flat Panels are rugged industry-standard LCD monitors.

They can be used in any application in which CRT monitors
are used.
Installation
- They are equally suited to installation in the machine, in
control cabinets, consoles and gantries or in 19" racks.
- As a device with all-round IP65 protection for mounting on a
supporting arm/supporting foot
Possible operation:
- Simple display devices without operator functionality
- Optional devices with touch control
- Rear connection of I/O devices (optional)
Benefits
Rugged industrial design:

- High shock and vibration resistance as well as extremely
high electromagnetic compatibility make for a fail-safe and
long-lasting design
- Enclosure front in degree or protection IP65/NEMA4,
resistant against dust and humidity
- Enclosure version complete in degree of protection IP65 for
mounting on supporting arm
- Scratch-resistant, anti-glare mineral glass screen, providing
high mechanical protection against pressure and scratching
- Meets CE standard "Industry"
Variety of versions
No X-rays
Lower energy requirement
Fatigue-proof operation:
- Wide reading angle of up to 170 horizontal and vertical
- Sharp and high-contrast graphic display
- No flickering, uniform brightness
- Automatic display adjustment (Auto Adjust)
Configuration using on-screen display (OSD)
Small space requirement and low weight
Long service life
9/4
The following are included in the scope of supply of the built-in

units:
24 V connection plug
Power supply cable (Europe) for version with AC power pack
(power supply cables for other countries can be ordered as an
accessory)
VGA connection cable 1.8 m (other cable lengths and DVI
cable available separately as accessories)
USB Touch connection cables for Touch devices (other cable
lengths available separately as accessories)
Operating instructions, 2 languages (German and English)
CD-ROM with hardware drivers and documentation
The following are included in the scope of supply of the PRO
devices:
24 V connection plug
Power supply cable (Europe) (power supply cables for other
countries can be ordered as an accessory)
CD-ROM with hardware drivers and documentation
Special functions of extended version
Two rear USB interfaces
Dimmable backlit display
Combined AC and DC power supply
EX22 approval for 17" and 19" devices
Marine approvals
Flat Panel PRO 15" Touch devices
All-round IP65 protection and NEMA 4-certified
15" touch display
Rugged aluminum enclosure
Combined 24 V DC and 100-240 V AC (50/60 Hz) power
supply
Two internal USB interfaces, one of which can be lead through
with the "USB service interface" accessory
Can be located up to 30 m away from the computer unit
standard for flexible installation
Siemens AG 2009
SIMATIC Flat Panel
Ordering data
Order No.
Order No.
Accessories for Flat Panel Monitor
Flat Panel Monitor
6AV7 861- 7 7 7 7 0- 7 AA0
Display size:
12
15
17
19
Operator functionality:
Display devices without
operator functionality
Connecting cables
for all versions
Video (VGA)
- 3.0 m
6AV7 860-0AH30-0AA0
- 5.0 m
6AV7 860-0AH50-0AA0
Video (DVI-D)
- 3.0 m
6AV7 860-0BH30-0AA0
- 5.0 m
6AV7 860-0BH50-0AA0
USB for optional touch screen

1
Power supply:
- 3.0 m
6AV7 860-0CH30-0AA0
- 5.0 m
6AV7 860-0CH50-0AA0
DC 24 V (not for Extended

versions)
Connection cables for

Extended and PRO versions
100 230 VAC (incl. Euro

power supply cable) and
24 VDC
Cable set 10 m
(DVI-D, CAT5 cable (USB),
USB transmitter module)
6AV7 860-1EX21-0AA1
Cable set 15 m
6AV7 860-1EX21-5AA1
Cable set 20 m
6AV7 860-1EX22-0AA1
Cable set 30 m
6AV7 860-1EX23-0AA1
Version
Standard:
Can be located up to 5 m away
Extended:
Can be located up to 30 m away
- Marine approvals
- Dimmable backlit display
- Ex22
Accessories for Flat Panel PRO 15"
* 0 with standard version,

1 with extended version
6AV7 674-0LX00-0AA0
1-port USB interface

Adapter set for
Flat Panel Monitor PRO 15"

Touchscreen
Fully enclosed Flat Panel with 15"
Touch display, IP65, AC and DC
power supply, can be mounted
separately up to 30 m, DVI and
VGA interface
6AV7 861-5TB10-1AA0
Rittal CP-L
6AV7 674-0KC00-0AA0
Adapter set for

Rose GT48/2
Rolec taraPLUS
Rittal CP-S
Bernstein CS3000 coupling 48
Rolec Quadro
Rose GTK electronic
6AV7 674-0KB00-0AA0
Adapter set VESA 100

VESA 100
Rose GTN II
6AV7 674-0KD00-0AA0
Adapter set VESA 75

VESA 75
6AV7 674-0KE00-0AA0
9/5
Siemens AG 2009
SIMATIC Flat Panel
Dimensions
H
D
10,5
Front dimensions
W+1 (cutout)
H+1 (cutout)
Touch panels
12"
15"
17"
19"
400
483
483
483
310
310
400
400
Installation cutout
W+1
H+1
Touch panels
12"
15"
17"
19"
368
450
450
450
290
290
380
380
51
55
57
57
Installation cutout Flat Panel
400
310
Flat Panel PRO 15 Touch
9/6
G_ST80_XX_00350
67.85
90.85
G_ST80_XX_00238Y
Siemens AG 2009
SCD Monitors
Overview
The SCD 1297/1597/1997 monitors are LCD monitors in a

rugged industrial design.
They can be used in any application in which CRT monitors
are used.
Rack-mounting version:
Rack-mounting units (for control cabinets, control desks and
gantries)
19" rack-mounting units (for 19" racks)
Desktop models only (19" display)
Simple display devices
Panels with touch operator control
Benefits
Rugged industrial design:
- High shock and vibration resistance as well as extremely
high EMC compatibility make for a fail-safe and long-lasting
design
- Enclosure rated IP65, resistant against dust and humidity
- Mineral glass screen, high mechanical protection against
pressures and scratch resistance
- Meets CE standard "Industry"
Variety of versions
No X-rays
Lower energy requirement
Fatigue-proof operation:
- Large reading angle
- Sharp and high-contrast graphic display
- No flicker, uniform brightness
- Automatic display adjustment (Auto Adjust)
Configuration using on-screen display (OSD)
Small space requirement and low weight
Long service life
Design
Rugged aluminum enclosure

12"/15"/19" TFT display
Anti-glare and hardened mineral glass screen
Simple display, touch screen
Line frequency 30-80 kHz
Refresh frequency 50-72 Hz
Power supply 100-240 V AC, 12 V DC and 24 V DC
The industrial LCD monitors SCD 1297, 1597, 1997 come in two
rack-mounting versions:
As rack-mounting units
(for control cabinets, control desks and gantries)
- SCD 1297/1597/1997-E display unit only
- SCD 1297/1597/1997-ET with analog resistive touch screen
As 19" rack-mounting units for 19" racks
- SCD 1297/1597/1997-R display unit only
- SCD 1297/1597/1997-RT with analog resistive touch screen
Scope of delivery:
Network connecting cable for AC power supply unit
Connecting cables 1.8 m, 5 m, 10 m or 20 m
CD-ROM with touch drivers
Special features for switch-over from CRT monitors to LCD
monitors
Screen diagonal:
The rough formula for LCD monitors is: "Display size in inch
plus 2", corresponds to the comparable CRT monitor size
(14" CRT equivalent to 12" LCD).
Resolution:
When the corresponding LCD monitor is selected, make sure
that the resolution of the LCD monitor is suitable for the visualization application.
9/7
Siemens AG 2009
SCD Monitors
Ordering data
Order No.
Order No.
Accessories
LCD monitors
6AV8 101- 7 7 7 0 0- 0 7 A1
Monitor/type
Connecting cable
Video + Touch
12" TFT (SCD 1297)
- 1.8 m
6AV8 107-0BA00-0AA0
15" TFT (SCD 1597)
- 5.0 m
6AV8 107-0DA00-0AA0
19" TFT (SCD 1997)
- 10.0 m
6AV8 107-0FA00-0AA0
- 20.0 m
6AV8 107-0HA00-0AA0
Rack-mounting version:
Rack-mount unit
19 rack unit (R)
Video
- 20.0 m
Video + 2*PS/2
Operator functionality:
Display devices without
operator functionality
Touch (T)
Keyboard
(Rack-mount unit only, not 19"
rack unit)
- 1.8 m
- 5.0 m
- 10.0 m
- 20.0 m
Video (not for Keyboard and

Touch operator functionality)
- 1.8 m
- 5.0 m
Video + X27 (for Keyboard

operator functionality only)
- 10.0 m
- 20.0 m
6AV8 107-0DC00-0AA0
- 10.0 m
6AV8 107-0FC00-0AA0
- 20.0 m
6AV8 107-0HC00-0AA1
6AV8 107-1AA00-0AA0
for SCD monitor (with

bracket + power supply cable)
Desktop models
19" LCD monitors
6GF6 220-1DA01
6GF6 220-1DB01
SCD 19101-D, desktop model

(design identical to SCD 1898-I)
19" Touch LCD monitors
Video + 2*PS/2 (for Keyboard

operator functionality only)
9/8
6AV8 107-0BC00-0AA0
- 5.0 m
100 240 V AC
power supply unit
Video + Touch
- 1.8 m
Video + X27
Connecting cable:
- 20.0 m
6AV8 107-0HB00-0AA0
SCD 19101-DT, desktop model

(design identical to the
successor of SCD 1898-IT, but
with USB Touch)
Siemens AG 2009
SCD Monitors
Dimensions
364
M3x10
ACTIVE AREA
246x184.5
245
170
Power
Power
supply
XGA
284
332
240
Operating elements
262
229
170
Touch
40
341.4
307
240
76
Switchboard cutout
G_ST80_EN_00023
View A
SCD 1297-E, SCD 1297-ET
483
465
40
View A
ACTIVE AREA
246x184.5
Power
Power
supply
XGA
Operating
elements
Touch
190.4
76
G_ST80_EN_00025
SCD 1297-R, SCD 1297-RT
9/9
Siemens AG 2009
SCD Monitors
Dimensions (continued)
428
44.5
406
393
360.5
120.7
M4x10
ACTIVE AREA 304x228
Power
27.5
82.5
4
Touch
Power
Supply
XGA
290
314
279
107
Operating
elements
336
397
Switchboard cutout
G_ST80_XX_00026
View A
SCD 1597-E, SCD 1597-ET
View A
483
39
465
27
ACTIVE AREA 304x228
XGA
Power
Supply
Unit
Power
Operating
elements
310.3
234.9
Touch
44.5
G_ST80_XX_00028
82.5
4
SCD 1597-R, SCD 1597-RT
9/10
Siemens AG 2009
SCD Monitors
Switchboard cutout
459
417
400
200
101
459
450
400
200
481
362
d=5(16x)
362.4
240
353.4
220 V AC
VGA
290
384.4
240
338
362.4
Operating
elements
Touch
S-VHS
FBAS
G_ST80_XX_00029
85
SCD 1997-E/ET
AC 220 V
VGA
120.6
323.8
399.2
483
465
101
Touch
S-VHS
FBAS
4
G_ST80_XX_00030
85
SCD 1997-R/RT
9/11
Siemens AG 2009
SCD Monitors
465
15"
380
240
287.6
160
SCD 19101-D/DT
9/12
G_ST80_XX_00031
51
444
393
47
20
393
91
5"
Siemens AG 2009
Overview
Benefits
Ultra-compact, rugged and industry-standard
SLC-Flash technology for maximum data security and performance
High level of electromagnetic compatibility according to CE
Industry when operated with SIMATIC PC
Especially suitable for use in industrial environments thanks to
the metal enclosure
Two USB FlashDrives can be inserted one above the
other/side by side
System tested with SIMATIC PC/PG (hardware and software)
Can be used to transfer Automation License Keys
(requirement: Automation License Manager, V2.x and higher)
Added value
SIMATIC PC BIOS-Manager (DOS and Windows version)
included in scope of supply
The SIMATIC PC USB FlashDrive is the ideal mobile storage

medium for SIMATIC PCs/PGs. Thanks to the rugged and ultracompact construction in a metal enclosure, fast data transfer
(USB 2.0) and the high memory capacity of 2 GB, the USB
FlashDrive is ideally suited for use in industrial applications. It
replaces diskettes, CD and DVD read/write media as data memory. Thanks to its high access speed, it is also ideal for tools that
are not to be installed on the computer (portable applications).
In addition, it can be set up ready to boot using SIMATIC PC
BIOS-Manager. There is an option of expanding the USB FlashDrive set up in this way into a "tool stick" using SIMATIC PC
Image and/or SIMATIC PC Partition Creator.
Recommended operating systems:
Windows 2000/XP/Vista
Ordering data
Order No.

boot capability, for SIMATIC PC:
Rack PC, Box PC and Panel PC
(477 Embedded/577/677/877)
and for SIMATIC PG
1 ... 9 units
6ES7 648-0DC40-0AA0
10 units and above
6ES7 648-0DC40-0AA0
100 units and above
6ES7 648-0DC40-0AA0
Notice:
For orders of more than 100, delivery time may be extended.
9/13
Siemens AG 2009
Input devices
Keyboards
Overview
Standard keyboard
The standard keyboard with PS/2 interface is housed in an ergonomic flat case. The numerical keypad and the cursor keys are
offset.
IP65 membrane keyboard, desktop version
The desktop version of the IP65 membrane keyboard is suitable
in particular for use in industrial sectors in which there are extreme environmental conditions and a high degree of protection
(IP65) is required. The keyboard is equipped with a touchpad.
IP65 membrane keyboard, 19 flush-mounting version
The flush-mounting version of the IP65 membrane keyboard is
suitable in particular for use in industrial sectors in which there
are extreme environmental conditions and a high degree of protection (IP65 at the front, IP54 at the rear) is required. The keyboard is purpose-designed for mounting in 19 cubicles.
19 draw-out keyboard PS/2 with trackball
SIMATIC PC keyboard
The original SIMATIC PC keyboard is the ideal input medium for
your SIMATIC PC. It combines the convenience of an office keyboard with the ruggedness of an industrial device. The SIMATIC
PC keyboard is available with a USB connection and German/
international layout. It is optionally available with an integrated
USB hub for 4 other USB devices.
Ordering data
Order No.
SIMATIC PC keyboard
IP65 membrane keyboard,

19 flush-mounting version
For mounting in 19 cubicles
6ES7 648-0CD00-0YA0
With touchpad
USB connection
German keyboard layout
6GF6 710-1AA
International keyboard layout
6GF6 710-1BA
IP65 membrane keyboard,

desktop version with touchpad
With PS/2 connector
6GF6 710-2AC
A
6GF6 710-2BC
9/14
6GF6 710-3AE
- International keyboard layout
6GF6 710-3BE
- German keyboard layout
6GF6 710-3BF
- International keyboard layout
6GF6 710-3BG
19 draw-out keyboard
with trackball
German keyboard layout

International keyboard layout

With trackball
Standard keyboard
with PS/2 interface
Order No.
6ES7 648-0CB00-0YA0
USB connection
SIMATIC PC keyboard,
4x USB
With its compact design and integrated trackball the new drawout keyboard is suitable in particular for industrial applications
with limited space. This can be, for example, cubicles or mobile
systems. The draw-out keyboard is supplied in combination with
a drawer.
6GF6 710-3BJ
- International keyboard layout A
6GF6 710-3BK
Siemens AG 2009
Input devices
SIMATIC PC mouse
Overview
Benefits
Minimized overhead through safe and reliable operation with
SIMATIC PC/PG
Ordering data
SIMATIC PC mouse
Order No.
A
6ES7 790-0AA01-0XA0
Optical wheel mouse,

USB interface,
incl. PS/2 adapter
Even with the mouse we offer you more than the standard:
Optical wheel mouse for use with USB or PS/2 interface.
Interfaces: USB and PS/2 (via adapter)
Operating systems: Microsoft Windows XP, 2000, ME, 98,
Windows NT4
Connection cable: Length 1.83 m, USB plug
Approvals:
- FCC Declaration of Conformity (USA)
- UL and cUL Notice of Approval (USA and Canada)
- ICES-003 report on file (Canada)
- TV-GS Certificate (Germany)
- CE Declaration of Conformity
- Safety and EMC (EU)
- GOST Certificate (Russia)
- VCCI Certificate (Japan)
- ACA/MED Declaration of Conformity
(Australia and New Zealand)
- BSMI Certificate (Taiwan)
- MIC Certificate (Korea)
- NOM Certificates (Mexico)
- CB Scheme Certificate (International)
- WHQL (International) ID: 866988
9/15
Siemens AG 2009
Input devices
Overview
Ordering data
Order No.
Operating channel extension

active
PS/2 ports

If the distance between computer and operator panel is greater
than 2 m, you will require an operating channel extension (BKV).
The BKV is an active operating channel extension for use in
harsh industrial environments. It is available in the following
lengths:
BKV 2520: 20 m
BKV 2550: 50 m
Note:
Every operating channel extension has PS/2 ports for mouse
and keyboard. An additional video cable of corresponding
length is required for the monitor.
9/16
20 m long
6GF6 980-0KC
50 m long
6GF6 980-0KE
Siemens AG 2009
Printers
Matrix printers T 2240, T 2340
Overview
Ordering data
Order No.
T 2240/9
9-pin, DIN A4
(power supply is not switchable:
operates only at 230 V)
6GF6 520-1LL
T 2240/24
24-pin, DIN A4
(power supply is not switchable:
operates only at 230 V)
6GF6 520-1LM
T 2340/24
24-pin, DIN A3
landscape (power supply is not
switchable: operates only at
230 V)
6GF6 520-1LN
Accessories
Interfaces
RS 232C
6GF6 520-2HA
RS 232/TTY
6GF6 520-2LA
Push tractor
The T 2240/9 is a rugged 9-needle printer for the medium performance range and is suitable for continuous use in rough industrial environments. The T 2240/24 is a rugged 24-needle printer
for the medium performance range (14,000 pages/month). The
strength of the T 2240/9 and T 2240/24 is its versatility. The
T 2240/9 is a cost-effective printer for professional use.
The T 2340/24 is a rugged 24-needle printer for paper size DIN
A3 horizontal. It is designed for the medium performance range
(14,000 pages/month) and is suitable for continuous use in
rough industrial environments. The strength of the T 2340/24 is
its versatility. It is a cost-effective printer for professional use.
T 2240 is the successor for previous model T 2030 or DR 2030.
T 2340 is the successor for previous model T 2130 or DR 2130.
Benefits
Economically priced form printer with 9-needle printing head
or 24-needle printing head
Printing volume up to 14,000 pages/month
Printing speed up to 500 characters/sec
Flexible paper input by optional linear tractor
High impact for up to 6 drafts (1 + 5)
Flexible paper input by continuous tractor and manual single
sheet feed (T 2340)
Optional, automatic front feed (T 2340)
22 barcodes, OCR-A and OCR-B
Particularly compact for small space requirements
for T 2240
6GF6 520-4LL
for T 2340
6GF6 520-4LM
Automatic individual sheet feed

for T 2340
6GF6 520-4LP
More information
Consumables can be ordered through
Siemens AG
I&S IS OLM RC CO
Mr. Michael Wagner
Tel.: +49 (9131) 7 32 514
Fax: +49 (9131) 7 32 558
E-mail: [email protected]
Information on possible uses, technical details, other printer
products and additional components from TallyGenicom GmbH
can be found on the Internet at
http://www.tallygenicom.com/
or is available from:
TallyGenicom GmbH
Sales
Mr. Klaus Hberle
Tel.: +49 (731) 20 75 550
Fax: +49 (731) 20 75 563
Technical hotline: +49 (731) 20 75 122
9/17
Siemens AG 2009
Printers
Matrix printers 2150, 2250
Overview
Ordering data
2150
24 pins, DIN A4 (switchable
power supply: 110 V/230 V)
Order No.
A
2250
24 pins, DIN A3 in landscape format (switchable power supply:
110 V/230 V)
6GF6 520-1LD
6GF6 520-1LE
Accessories
Interfaces
RS 232/TTY
Ethernet (10/100 MBit)
6GF6 520-2LB
A
6GF6 520-2LC
Automatic individual sheet feed

(for 2150)
The 2150 is a multifunctional 24-pin printer for paper sizes up to

DIN A4. It is designed for high performance (up to 26,000 pages
per month), and is suitable for continuous use under harsh industrial conditions.
The 2250 is a multifunctional 24-pin printer for paper sizes up to
DIN A3 in landscape format. It is designed for high performance
(up to 26,000 pages per month), and is suitable for continuous
use under harsh industrial conditions.
2150 is the successor for previous models T 2145, T 2040 or
DR 2040. 2250 is the successor for previous models T 2245,
T 2140 or DR 2140.
Benefits
Multifunctional needle printer for various applications

Printing volume up to 26,000 pages/month
Printing speed up to 650 characters/sec
Graphics resolution up to 360 x 360 dpi
Flexible paper input by linear tractor and single sheet feed
Extensive automatic functions for unsupervised printing jobs
Rugged design for reliable operation
Feed from the front
6GF6 520-4LG
Feed from the back
6GF6 520-4LH
2nd/3rd push tractor (for 2150)
6GF6 520-4LJ
More information
Consumables can be ordered through
Siemens AG
I&S IS OLM RC CO
Mr. Michael Wagner
Tel.: +49 (9131) 7 32 514
Fax: +49 (9131) 7 32 558
Information on possible uses, technical details, other printer
products and additional components from TallyGenicom GmbH
can be found on the Internet at
http://www.tallygenicom.com/
or is available from:
TallyGenicom GmbH
Sales
Mr. Klaus Hberle
Tel.: +49 (731) 20 75 550
Fax: +49 (731) 20 75 563
Technical hotline: +49 (731) 20 75 122
7
9/18
10
Appendix
10/2
Training
10/3
Standards and Approbations
10/4
Siemens Contacts Worldwide
10/5
Siemens Solution Partner

Automation, Power Distribution
and PLM
10/6
Online Services
10/7
10/7
Customer Support
Our Services
for Every Phase of Your Project
Knowledge Base on CD-ROM
Automation Value Card
Siemens Service Option for SIMATIC
PC / PG
10/8
10/9
10/10
PC-based Automation
Competence Center
10/11
Safety of Electronic Equipment
10/12
Software Licenses
10/13
Subject index
10/15
Order No. index
10/18
Conditions of sale and delivery

Export regulations
Appendix
Training
Faster and more applicable know-how:

Hands-on training from the manufacturer
SITRAIN the Siemens Training for Automation and Industrial
Solutions provides you with comprehensive support in solving
your tasks.
Training by the market leader in automation and plant engineering enables you to make independent decisions with confidence. Especially where the optimum and efficient use of products and plants are concerned. You can eliminate deficiencies in
existing plants, and exclude expensive faulty planning right from
the beginning.
SITRAIN highlights
Top trainers
Our trainers are skilled teachers with direct practical experience.
Course developers have close contact with product development, and directly pass on their knowledge to the trainers.
Practical experience
The practical experience of our trainers enables them to teach
theory effectively. But since theory can be pretty drab, we attach
great importance to practical exercises which can comprise up
to half of of the course time. You can therefore immediately implement your new knowledge in practice. We train you on stateof-the-art methodically/didactically designed training equipment. This training approach will give you all the confidence you
need.
Wide variety
With a total of about 300 local attendance courses, we train the
complete range of Siemens products as well as interaction of the
products in systems. Telecourses, teach-yourself software and
seminars with a presenter on the Web supplement our classic
range of courses.
Tailor-made training
We are only a short distance away. You can find us at more than
50 locations in Germany, and in 62 countries worldwide. You
wish to have individual training instead of one of our
300 courses? Our solution: We will provide a program tailored
exactly to your personal requirements. Training can be carried
out in our Training Centers or at your company.
First-class know-how directly pays for itself: In shorter startup

times, high-quality end products, faster troubleshooting and reduced downtimes. In other words, increased profits and lower
costs.
Achieve more with SITRAIN
Shorter times for startup, maintenance and servicing
Optimized production operations
Reliable configuration and startup
Minimization of plant downtimes
Flexible plant adaptation to market requirements
Compliance with quality standards in production
Increased employee satisfaction and motivation
Shorter familiarization times following changes in technology
and staff
Contact
Visit our site on the Internet at:
www.siemens.com/sitrain
10
or let us advise you personally. You can request our latest training catalog from:
SITRAIN Customer Support Germany:
Phone: +49 (0)1805 / 23 56 11
Fax:
+49 (0)1805 / 23 56 12
(0.14 /min. from a German landline network,

mobile telephone prices may vary)
10/2
The right mixture: Blended learning

"Blended learning" means a combination of various training media and sequences. For example, a local attendance course in
a Training Center can be optimally supplemented by a teachyourself program as preparation or follow-up. Additional effect:
Reduced traveling costs and periods of absence.
Appendix
Standards and Approbations
Operating system licenses for SIMATIC PC

Note for SIMATIC PC / operating system licenses
The operating system license supplied applies only to the installation of the software on the SIMATIC PC with which it is supplied.
In accordance with Microsoft OEM license conditions, the software may only be installed on this SIMATIC system.
CE marking
The electronic products described in this catalog comply with
the requirements and protection objectives of the following EU
guidelines and with the harmonized European standards (EN)
which have been published for programmable controllers in the
Official Journal of the European Union:
89/336/EWG Electromagnetic Compatibility (EMC guideline)
73/23/EWG Electrical Equipment for Use Within Specific
Voltage Limits (low voltage guideline)
The EU conformity declarartion is available for examination by:
SIMATIC, SIMATIC NET, SIMATIC PC:
Siemens AG,
Industry Sector
Dept. IA AS EWA
P.O. Box 1963
D-92209 Amberg
GERMANY
SIMATIC HMI:
Siemens AG
Industry Sector
Dept. IA AS HMI
P.O. Box 4848
D-90475 Nrnberg
GERMANY
SITOP power:
Siemens AG
Industry Sector
Dept. IA SE PS
P.O. Box 2355
D-90713 Frth
GERMANY
10
10/3
Appendix
Siemens Contacts Worldwide
Overview
At
http://www.siemens.com/automation/partner
you can find details of Siemens contact partners worldwide
responsible for particular technologies.
You can obtain in most cases a contact partner for
Technical Support,
Spare parts/repairs,
Service,
Training,
Sales or
Consultation/engineering.
You start by selecting a
Country,
Product or
Sector.
By further specifying the remaining criteria you will find exactly
the right contact partner with his/her respective expertise.
10
10/4
Appendix
Automation, Power Distribution and PLM
Overview
The Solution Partner Finder, available to you on the Internet, is a
comprehensive database in which all Solution Partners, together
with their performance profiles, present themselves.
In addition to the search criteria Technology, Sector and Country,
you can also search by Company and ZIP Code. From there it is
only a small step to making the first contact.
Call up the Solution Partner Finder as follows:
CA 01 on CD-ROM/DVD:
On the start page via "Contacts & Partners;
Siemens Solution Partner Automation, Power Distribution and
PLM"
CA 01 online:
Go directly to the Solution Partner Finder:
www.siemens.com/automation/partnerfinder
Additional information about the Siemens Solution Partner
Program is available in the Internet at:
www.siemens.com/automation/solutionpartner
Siemens Solution Partner is the name used to identify selected

system integrators as suppliers of solutions for the Siemens
portfolio in the automation, power distribution and product
lifecycle management (PLM) sectors in accordance with
globally uniform qualification procedures.
In the context of the Siemens Solution Partner program, our
strengths merge with the competences of our Solution Partners.
Our product and system expertise works together with the
comprehensive application and sector expertise of our partners
to always produce perfect solutions for every application.
The number of Solution Partners has increased extremely
rapidly, and now more than 850 certified Solution Partners are
able to provide pioneering, tailored solutions in more than 45
countries.
10
10/5
Appendix
Online Services
Information and Ordering
in the Internet and on DVD
Siemens Industry Automation and Drive Technologies in the WWW

A detailed knowledge of the range of products and services
available is essential when planning and configuring automation
systems. It goes without saying that this information must always
be fully up-to-date.
Siemens Industry Automation and Drive Technologies has
therefore built up a comprehensive range of information in the
World Wide Web, which offers quick and easy access to all data
required.
Under the address
http://www.siemens.com/automation
you will find everything you need to know about products,
systems and services.
Product Selection Using the Offline Mall

Detailed information together with convenient interactive
functions:
The Offline Mall CA 01 covers more than 80,000 products and
thus provides a full summary of the Siemens Industry Automation
and Drive Technologies product base.
Here you will find everything that you need to solve tasks in the
fields of automation, switchgear, installation and drives.
All information is linked into a user interface which is easy to
work with and intuitive.
After selecting the product of your choice you can order at the
press of a button, by fax or by online link.
Information on the Offline Mall CA 01 can be found in the Internet
under
http://www.siemens.com/automation/ca01
or on CD-ROM or DVD.
Easy Shopping with the A&D Mall

The A&D Mall is the virtual department store of Siemens AG in
the Internet. Here you have access to a huge range of products
presented in electronic catalogs in an informative and attractive
way.
Data transfer via EDIFACT allows the whole procedure from
selection through ordering to tracking of the order to be carried
out online via the Internet.
10
Numerous functions are available to support you.

For example, powerful search functions make it easy to find the
required products, which can be immediately checked for availability. Customer-specific discounts and preparation of quotes
can be carried out online as well as order tracking and tracing.
Please visit the A&D Mall on the Internet under:
http://www.siemens.com/automation/mall
10/6
Appendix
Customer Support
Our Services for Every Phase of Your Project
Configuration and Software Engineering

Support in configuring and developing with customer-oriented
services from actual configuration to implementation of the automation project.1)
Service On Site
With Service On Site we offer
services for startup and maintenance, essential for ensuring
system availability.
In Germany
0180 50 50 4441)
( 0.14 /min. from a German
landline network, mobile telephone prices may vary)
.I
In the face of harsh competition you need optimum conditions to

keep ahead all the time:
A strong starting position. A sophisticated strategy and team for
the necessary support - in every phase.
Service & Support from Siemens provides this support with a
complete range of different services for automation and drives.
In every phase: from planning and startup to maintenance and
upgrading.
Our specialists know when and where to act to keep the productivity and cost-effectiveness of your system running in top form.
Repairs and Spare Parts

In the operating phase of a machine or automation system we
provide a comprehensive repair
and spare parts service ensuring the highest degree of operating safety and reliability.
In Germany
0180 50 50 4461)
Online Support
The comprehensive information
system available round the
clock via Internet ranging from
Product Support and Service &
Support services to Support
Tools in the Shop.
automation/service&support
Optimization and Upgrading
Technical Support
To enhance productivity and

save costs in your project we offer high-quality services in optimization and upgrading.1)
Competent consulting in technical questions covering a wide

range of customer-oriented services for all our products and
systems.
Tel.: +49 (0)180 50 50 222
Fax: +49 (0)180 50 50 223
automation/support-request
Technical Consulting
Support in the planning and designing of your project from detailed actual-state analysis,
target definition and consulting
on product and system questions right to the creation of the
automation solution.1)
10
1)
For country-specific telephone numbers go to our Internet site at:

10/7
Appendix
Customer Support
Knowledge Base on CD-ROM
For locations without online connections to the Internet there are
excerpts of the free part of the
information sources available on
CD-ROM (Service & Support
Knowledge Base). This CDROM contains all the latest
product information at the time
of production (FAQs, Downloads, Tips and Tricks, Updates)
as well as general information
on Service and Technical Support.
The CD-ROM also includes a
full-text search and our Knowl-
edge Manager for targeted searches for solutions. The CD-ROM

will be updated every 4 months.
Just the same as our online offer in the Internet, the Service &
Support Knowledge Base on CD comes complete in 5 languages (German, English, French, Italian, Spanish).
You can order the Service & Support Knowledge Base CD
from your Siemens contact.
Order no. 6ZB5310-0EP30-0BA2
Orders via the Internet
(with Automation Value Card or credit card) at:
in the Shop domain.
Automation Value Card

By entering the card number and PIN you have full access to the
Service & Support services being offered. The charge for the
services procured is debited from the credits on your Automation Value Card.
All the services offered are marked in currency-neutral credits,
so you can use the Automation Value Card worldwide.
Automation Value Card order numbers
Credits
Small card - great support

The Automation Value Card is an integral component of the comprehensive service concept with which Siemens Automation and
Drives will accompany you in each phase of your automation
project.
It doesn't matter whether you want just specific services from our
Technical Support or want to purchase high-quality Support
Tools in our Online Shop, you can always pay with your Automation Value Card. No invoicing, transparent and safe. With your
personal card number and associated PIN you can view the
state of your account and all transactions at any time.
Services on card. This is how it's done.
Card number and PIN are on the back of the Automation Value
Card. When delivered, the PIN is covered by a scratch field,
guaranteeing that the full credit is on the card.
10
10/8
Order no.
200
6ES7 997-0BA00-0XA0
500
6ES7 997-0BB00-0XA0
1000
6ES7 997-0BC00-0XA0
10000
6ES7 997-0BG00-0XA0
Detailed information on the services offered is available on our

Internet site at:
Service & Support la Card: Examples
Technical Support
Priority
Priority processing for urgent cases
24 h
Availability round the clock
Extended
Technical consulting for complex questions
Support Tools in the Support Shop

System
Utilities
Tools that can be used directly for configuration, analysis and testing
Applications
Complete topic solutions including ready-tested software
Functions &
Samples
Adaptable blocks for accelerating your developments
Appendix
Customer Support
Siemens Service Option fr SIMATIC PC / PG
Product family
Order No.
Service option
Order designation
SIMATIC Rack PC
A5E00510072
36 month service
option for SIMATIC
Rack PC and Box PC
A5E00509961
36 month service
option for SIMATIC
Panel PC
A5E00510007
36 month service
option for SIMATIC
Field PG M/M2
Rack PC 847B
Rack PC 547B
Rack PC 647B
SIMATIC Box PC
Box PC 627B
Box PC 827B
Microbox PC 427B
SIMATIC PCS7 Rack PC
The expanded hardware service for SIMATIC

PC/PG products
Purchasing and registering this additional agreement for a
SIMATIC PC/PG extends the time period for free repairs of this
device to 36 months after delivery.
Scope of services of the service option within the period of
service (36 months):
Free1) repair during the period of service at one of our authorized repair centers near you. The addresses of our worldwide
partners can be found on the Internet at
www.siemens.com/asis
Within the agreed contractual period, Siemens will bear the
costs that are incurred in the repair center (labor and materials/replacement parts), which are needed to restore the
functions2) of the hardware
Siemens will also assume the return shipping costs of the
repaired device from the repair center to the customer
SIMATIC Panel PC
Panel PC 477B
Panel PC 577B
Panel PC 677B
SIMATIC Field PG
SIMATIC Field PG M2
Ordering and registering the additional agreement:

Select the appropriate order number for the optional package
based on the family of products and place your order
Scope of delivery:
Description of services in 4 languages + service device label
with a license number for identifying the additional agreement
on the device
Activation of the service license number for a SIMATIC PC/
SIMATIC PG via the Internet (www.siemens.de/ped):
The registration must be completed within the first 90 days after initial delivery of the device!
1) Wear and tear as well as problems that arise due to improper handling
of the devices are not included.
2) For hard disk defects that require the system to be restored, the repair
service will only cover restoring the installation to its original condition
ex works.
The uploading of additional application software, drivers and setting
up the operating software are not covered by the free repair service.
10
10/9
Appendix
PC-based Automation Competence Center
Overview
Know-how and services for PC-based Automation
You require support concerning the design and possibilities of a
PC-based Automation project, or even engineering support?
Siemens has installed a team of specialists especially for this
purpose in Cologne snd Milan. These specialists work closely
with the development and product marketing departments, and
can provide competent support worldwide to our sales departments on all matters of PC-based Automation.
Our core competences

Design of PC-based Automation systems from Siemens
Customer-specific integration of technologies (add-ons) using
high-level languages (C++) in Windows or real-time environments
Knowledge transfer/workshops for the integration of components from other vendors and for applications using the Open
Development Kit (ODK)
Technology and application know-how
Development of Addons for WinAC and WinCC flexible
(see page 4/8)
Reference applications
Fast recording of measured values
Software blocks for drive library
Customized communication using Ethernet
(OPC/ActiveX, TCP-Socket)
Synchronous operation, cross cutter, table interpolation for
electric and hydraulic axes
Integration of PCI cards into PC-based Automation applications (e.g. WinAC and ASi-Bus)
Customized development and integration of C++ programs
Interfaces to databases
Integration of complex control algorithms
10
Contacts
Activation of the Competence Center for your application is
carried out by your regional partner.
If you do not yet have a contact person in your region, you just
have a look at the Internet:
http://www.siemens.com/automation/partner
10/10
Further information and up-to-date news on available workshops

can be found on the Internet:
http://www.siemens.com/pcbased
Appendix
Safety of Electronic Equipment
Safety of electronic equipment

The information listed here is mainly of a fundamental nature and
applies regardless of the type and vendor of the electronic control system.
Reliability
The reliability of devices and components is being driven as
high as possible by employing extensive and cost-effective
measures in development and production.
This includes:
Selection of high-quality components
Worst-case design calculation of all circuits
Systematic and computer-controlled testing of all subcontracted components
Burn-in of all large-scale integrated circuits
(e.g. processors, memories etc.)
Measures to prevent static charging when working at or with
MOS circuits
Visual checks at various stages of production
In-circuit testing of all modules, i.e. computer-aided testing of
all components and their interaction in the circuit
Hot endurance run at high ambient temperature over several
days
Meticulous computer-controlled final testing
Statistical evaluation of all returns for immediate introduction
of remedial actions
Division into a safe and a non-safe zone

In practically all plants there are parts which perform safetyrelated functions (e.g. emergency stop pushbuttons, mesh
guards, two-hand controls). In order not to have to consider the
complete control system in terms of safety engineering it is customary to divide the control system into a safe and a non-safe
zone. No special requirements are imposed on the safety of the
control system in the non-safe zone because there would be no
impact on the safety of the plant if the electronics failed in this
case. In the safe zone, on the other hand, you are only allowed
to use control systems and/or circuits which satisfy the directives
in question.
The following zonal divisions are customary in practice:
Control systems with little safety engineering,
e.g. machine control systems
Control systems with balanced zones,
e.g. chemical plants, aerial ropeways
Control systems with mainly safety engineering,
e.g. incineration plants
Important
Even if a maximum of design-based safety is achieved in the
configuration of an electronic control system e.g. through
multiedge configuration it is still essential to closely follow the
instructions in the operating manuals as otherwise wrong actions
may suspend precautions for preventing potential faults or may
create additional sources of danger.
These measures are regarded as basic measures in safety engineering. They prevent or keep control of the majority of potential
faults.
Risks
Wherever faults are liable to cause injury to persons or damage
to property it is necessary to introduce measures aimed in particular at the safety of the plant and, therefore, of the control system. Special, plan-specific directives exist for these applications
and need to be taken into account when configuring the control
system.
In the case of safety-relevant electronic control systems the
measures needing to be taken to prevent or keep control of
faults are aimed at the risk presented by the plant. In such a
case the basic measures listed above are no longer sufficient
above a certain level of hazard potential. Additional measures
have to be implemented and certified (e.g.dual-channel
arrangements, tests, checksums etc.) for the control system.
10
10/11
Appendix
Software Licenses
Overview
Software types
Software requiring a license is categorized into types.
The following software types have been defined:
Engineering Software
Runtime Software
Factory license
With the Factory License the user has the right to install and use
the software at one permanent establishment only. The permanent establishment is defined by one address only.The number
of hardware devices on which the software may be installed
results from the order data or the Certificate of License (CoL).
This includes all software products for creating (engineering)
user software, e.g. for configuring, programming, parameterizing, testing, commissioning or servicing.
Data generated with engineering software and executable
programs can be duplicated for your own use or for use by thirdparties free-of-charge.
Certificate of license
The Certificate of License (CoL) is the licensee's proof that the
use of the software has been licensed by Siemens. A CoL is
required for every type of use and must be kept in a safe place.
Runtime software
This includes all software products required for plant/machine
operation, e.g. operating system, basic system, system expansions, drivers, etc.
The duplication of the runtime software and executable programs created with the runtime software for your own use or for
use by third-parties is subject to a charge.
You can find information about license fees according to use in
the ordering data (e.g. in the catalog). Examples of categories of
use include per CPU, per installation, per channel, per instance,
per axis, per control loop, per variable, etc.
Information about extended rights of use for parameterization/configuration tools supplied as integral components of the
scope of delivery can be found in the readme file supplied with
the relevant product(s).
License types
Siemens Automation & Drives offers various types of software
license:
Floating license
Single license
Rental license
Trial license
Factory license
Floating license
The software may be installed for internal use on any number of
devices by the licensee. Only the concurrent user is licensed.
The concurrent user is the person using the program. Use
begins when the software is started.
A license is required for each concurrent user.
10
Single license
Unlike the floating license, a single license permits only one
installation of the software.
The type of use licensed is specified in the ordering data and
in the Certificate of License (CoL). Types of use include for
example per device, per axis, per channel, etc.
One single license is required for each type of use defined.
Rental license
A rental license supports the "sporadic use" of engineering
software. Once the license key has been installed, the software
can be used for a specific number of hours (the operating hours
do not have to be consecutive).
One license is required for each installation of the software.
Trial license
A trial license supports "short-term use" of the software in a nonproductive context, e.g. for testing and evaluation purposes.
It can be transferred to another license.
10/12
Downgrading
The licensee is permitted to use the software or an earlier version/release of the software, provided that the licensee owns
such a version/release and its use is technically feasible.
Delivery versions
Software is constantly being updated.
The following delivery versions
PowerPack
Upgrade
can be used to access updates.
Existing bug fixes are supplied with the ServicePack version.
PowerPack
PowerPacks can be used to upgrade to more powerful software.
The licensee receives a new license agreement and CoL
(Certificate of License) with the PowerPack. This CoL, together
with the CoL for the original product, proves that the new software is licensed.
A separate PowerPack must be purchased for each original
license of the software to be replaced.
Upgrade
An upgrade permits the use of a new version of the software on
the condition that a license for a previous version of the product
is already held.
The licensee receives a new license agreement and CoL with
the upgrade. This CoL, together with the CoL for the previous
product, proves that the new version is licensed.
A separate upgrade must be purchased for each original license
of the software to be upgraded.
ServicePack
ServicePacks are used to debug existing products.
ServicePacks may be duplicated for use as prescribed according to the number of existing original licenses.
License Key
Siemens Automation & Drives supplies software products with
and without license keys.
The license key serves as an electronic license stamp and
is also the "switch" for activating the software (floating license,
rental license, etc.).
The complete installation of software products requiring license
keys includes the program to be licensed (the software) and the
license key (which represents the license).
Note:
Detailed explanations concerning license conditions can be
found in the Terms and Conditions of Siemens AG or under:
(A&D Mall Online-Help System)
I IA/Software licenses/En 03.08.06
Appendix
Subject index
Page
A
AC UPS uninterruptible power supplies ........................ 3/87
ADDM - Data Management ........................................... 3/77
Appendix ........................................................................ 10/1
Application examples .................................................... 1/10
Automation Value Card ................................................... 10/8
B
Backplane cover ............................................................ 3/61
C
Categories ....................................................................... 1/9
Communication................................................................. 7/1
Communications processors for Industrial Ethernet ....... 7/2
Communications processors for PROFIBUS ................. 7/17
Export regulations ..................................................... 10/13
Connection options........................................................... 3/3
Connection options to PCs ..................................... 7/3, 7/18
CFC ................................................................................ 4/17
CP 1604 ........................................................................... 7/4
CP 1613 A2 ...................................................................... 7/6
CP 1616 ........................................................................... 7/5
CP 1623 ........................................................................... 7/7
CP 5512 ......................................................................... 7/27
CP 5603 ......................................................................... 7/19
CP 5611 A2 .................................................................... 7/29
CP 5613 A2 .................................................................... 7/21
CP 5613 FO ................................................................... 7/23
CP 5614 A2 .................................................................... 7/25
CP 5621 ......................................................................... 7/31
Customer Support ......................................................... 10/7
Customized Automation for SIMATIC Panel PC ............. 3/57
Customized SIMATIC PC ............................................... 3/54
Customized SIMATIC Rack PC and Box PC .................. 3/54
D
DC UPS uninterruptible power supplies ........................ 3/83
Distributed I/O
SIMATIC ET 200 ............................................................. 8/1
Distributed configuration with control cabinet ................. 8/4
Distributed configuration without control cabinet ............ 8/3
E
Easy Motion Control ......................................................... 5/3
Embedded Automation..................................................... 2/1
Engineering Software ...................................................... 5/9
Engineering Tools .......................................................... 7/35
Excellence in Motion Control ........................................... 5/2
Expansion components .................................................... 9/1
Expansion components ................................................. 3/70
F
Field PG M2 ................................................................... 4/19
H
Hardware platforms ......................................................... 5/7
HMI packages with WinCC flexible and WinCC ............ 3/52
I
Industrial Communication................................................. 7/1
Industrial LCD Monitors ................................................... 9/4
Industrial PC .................................................................... 3/1
Industrial USB Hub 4 ..................................................... 3/82
Information and Ordering
in the Internet and on CD-ROM ................................... 10/6
Input devices ................................................................. 9/14
Page
K
Keyboards ..................................................................... 9/14
Knowledge Base on CD-ROM........................................ 10/8
L
Logic Control .................................................................... 4/1
M
MASTERGUARD ............................................................ 3/88
Matrix printers 2150, 2250 ............................................. 9/18
Matrix printers T 2240, T 2340 ....................................... 9/17
Mobile Panel PC 12" IWLAN .......................................... 3/63
Motion Control and Drives ................................................ 5/1
O
Online Services .............................................................. 10/6
OPC server for Industrial Ethernet ................................. 7/12
OPC server for PROFIBUS ............................................ 7/34
Operating channel extensions ....................................... 9/16
Our services for every phase of your project ................. 10/7
P
Panel PC 677B 46" ......................................................... 3/59
Panel PC Remote Kit ..................................................... 3/81
PC I/O modules ............................................................. 3/79
PC-based Automation ..................................................... 1/8
PC-based Automation Competence Center ................ 10/10
PC-based Panel fronts ................................................... 5/13
PC-based SIMOTION P350-3 ........................................ 5/10
PC-based Communication Board MCI-PN .................... 5/12
PN CBA OPC server ...................................................... 7/14
Printers ........................................................................... 9/17
Programming devices .................................................... 4/19
R
RMOS3 real-time operating system ............................... 3/66
RMOS3 V3.50 real-time operating system ..................... 3/66
Runtime system ............................................................... 5/8
S
S7-GRAPH ..................................................................... 4/15
S7-HiGraph .................................................................... 4/16
S7-REDCONNECT ........................................................... 7/9
S7-SCL ........................................................................... 4/14
Safety of electronic equipment .................................... 10/11
SCD Monitors ................................................................... 9/7
Siemens contacts worldwide ......................................... 10/4
Siemens Service Option for SIMATIC PC / PG ............... 10/9
Automation, Power Distribution and PLM .................... 10/5
SIMATIC Box PC ............................................................ 3/20
SIMATIC Box PC 627B ................................................... 3/26
SIMATIC Box PC 827B ................................................... 3/30
SIMATIC Embedded Automation ..................................... 2/2
SIMATIC ET 200M, ET 200iSP ......................................... 8/5
SIMATIC ET 200pro, ET 200eco ...................................... 8/3
SIMATIC ET 200S, ET 200S COMPACT ........................... 8/4
SIMATIC Flat Panel .......................................................... 9/4
SIMATIC HMI packages with WinCC flexible
and WinCC .................................................................. 3/52
SIMATIC iMap ................................................................ 4/18
SIMATIC Industrial Software .......................................... 4/10
SIMATIC Microbox 427B-RTX, -HMI/RTX ......................... 2/5
SIMATIC Microbox PC 427B .......................................... 3/22
SIMATIC MP 177 .............................................................. 2/9
SIMATIC MP 277 (incl. INOX) ........................................ 2/11
SIMATIC MP 377 ............................................................ 2/14
SIMATIC Panel PC ......................................................... 3/35
10/13
10
Appendix
Subject index
Page
10
S
SIMATIC Panel PC 477B embedded ............................. 3/37
SIMATIC Panel PC 477B-HMI, -HMI/RTX, -RTX ............... 2/6
SIMATIC Panel PC 577B ................................................ 3/43
SIMATIC Panel PC 677B (incl. INOX) ............................ 3/46
SIMATIC PC BIOS Manager .......................................... 3/73
SIMATIC PC CompactFlash ........................................... 3/78
SIMATIC PC DiagMonitor ............................................... 3/72
SIMATIC PC function cards ............................................ 3/56
SIMATIC PC Image Creator ........................................... 3/74
SIMATIC PC mouse ....................................................... 9/15
SIMATIC PC Partition Creator ........................................ 3/76
SIMATIC PC USB FlashDrive ......................................... 9/13
SIMATIC PC-based Control ............................................. 4/2
SIMATIC Rack PC ............................................................ 3/5
SIMATIC Rack PC 547B ................................................... 3/7
SIMATIC Rack PC 647B ................................................. 3/12
SIMATIC Rack PC 847B ................................................. 3/16
SIMATIC S7-modular Embedded Controller .................... 2/4
SIMATIC THIN CLIENT .................................................. 2/19
SIMATIC WinAC MP ....................................................... 2/17
SIMATIC WinAC ODK ...................................................... 4/9
SIMATIC WinAC Software PLC ........................................ 4/3
SIMATIC WinCC ............................................................. 6/10
SIMATIC WinCC flexible .................................................. 6/5
SIMATIC WinCC flexible RT ............................................. 6/5
SIMATIC WinCC flexible RT options ................................ 6/8
SIMOTION ....................................................................... 5/6
SIMOTION
Engineering software ..................................................... 5/9
SIMOTION
Hardware platforms ....................................................... 5/7
SIMOTION
The system ..................................................................... 5/6
SINAMICS ...................................................................... 5/14
SINAMICS S120 built-in devices ................................... 5/17
SINEMA E ...................................................................... 7/35
SITOP battery modules................................................... 3/86
SITOP DC UPS modules 6A/15A/40A ......................... 3/85
SITOP UPS500S ............................................................ 3/87
SNMP OPC server ......................................................... 7/16
SOFTNET for Industrial Ethernet .................................... 7/10
SOFTNET for PROFIBUS ................................................ 7/33
SOFTNET PN IO ............................................................. 7/11
Software Licenses ....................................................... 10/12
Standards and approbations ......................................... 10/3
STEP 7 ........................................................................... 4/11
STEP 7 Professional ....................................................... 4/13
T
The drive familiy ............................................................. 5/14
The System ...................................................................... 5/6
Training .......................................................................... 10/2
V
Visualization ...................................................................... 6/1
W
WinCC options ............................................................... 6/14
10/14
Appendix
Order No. index
Type
A5E
A5E00246975
A5E00509961
A5E00510072
A5E01064980
Page
................................................................ 3/10
.............................................. 3/41, 3/44, 3/49
.......... 3/10, 3/15, 3/19, 3/24, 3/29, 3/33, 4/20
................................................................ 3/19
C79
C79459- ......................................................................... 7/28
2XV
2XV9 450- ...................................................................... 6/13
6AG
6AG4 070- ..................................................... 2/8, 3/24, 3/41
6AG4 104- .............................................................. 3/9, 3/10
6AG4 112- ...................................................................... 3/14
6AR
6AR1 403- ...................................................................... 3/69
6AR1 405- ...................................................................... 3/69
6AU
6AU1-300........................................................................ 5/13
6AU1 350- ...................................................................... 5/11
6AR1 390- ...................................................................... 5/11
6AV
6AV6 371- ................ 6/11, 6/12, 6/13, 6/15, 6/16, 6/17, 6/18
6AV6 372- ...................................................................... 6/16
6AV6 381- ........................................... 6/11, 6/12, 6/13, 6/17
6AV6 382- ....................................................................... 3/53
6AV6 392- ...................................................................... 6/13
6AV6 574- ...................................................................... 2/21
6AV6 613- ........................................................................ 6/6
6AV6 618- ................................................................. 6/6, 6/9
6AV6 622- ............................................................. 2/12, 2/15
6AV6 623- ....................................................................... 3/53
6AV6 642- ........................................................................ 2/9
6AV6 643- ...................................................................... 2/11
6AV6 644- ...................................................................... 2/15
6AV6 646- ...................................................................... 2/21
6AV6 652- ........................................... 2/11, 2/12, 2/15, 2/18
6AV6 653- ...................................................................... 2/21
6AV6 671- ........................... 2/8, 2/21, 3/41, 3/44, 3/50, 3/82
6AV6 691- ........................ 2/9, 2/12, 2/15, 6/6, 6/7, 6/9, 6/18
6AV7 460- ...................................................................... 3/65
6AV7 466- ...................................................................... 3/60
6AV7 671- .................. 2/8, 3/41, 3/44, 3/49, 3/50, 3/81, 5/13
6AV7 672- .................................... 2/8, 3/41, 3/44, 3/49, 3/62
6AV7 673- ...................................................................... 3/65
6AV7 674- ......................................................................... 9/5
6AV7 83- ......................................................................... 3/43
6AV7 85 ........................................................... 2/7, 2/8, 3/40
6AV7 860- ........................................................................ 9/5
6AV7 861- ........................................................................ 9/5
6AV7 870- ............................................................. 3/48, 3/49
6AV7 871- ............................................................. 3/48, 3/49
6AV7 872- ............................................................. 3/48, 3/49
6AV7 873- ............................................................. 3/48, 3/49
6AV7 874- ............................................................. 3/48, 3/49
6AV7 875- ............................................................. 3/48, 3/49
6AV8 101- ......................................................................... 9/8
6AV8 107- ........................................................................ 9/8
Type
Page
6BQ
6BQ3 030- ..................................................................... 3/77
6EP
6EP1 333- ...................................................................... 3/83
6EP1 334- ...................................................................... 3/83
6EP1 931- .............................................................. 3/50, 3/85
6EP1 933- ...................................................................... 3/87
6EP1 935- .................................................... 3/50, 3/86, 3/87
6ES
6ES5 734- ...................................................................... 4/20
6ES7 643- ............................................................. 3/14, 3/18
6ES7 647- .................................................... 3/24, 3/28, 3/32
6ES7 648- ........ 2/8, 3/10, 3/15, 3/19, 3/24, 3/28, 3/29, 3/33,
............. 3/41, 3/44, 3/49, 3/50, 3/78, 3/80, 5/11, 9/13, 9/14
6ES7 652- ...................................................................... 6/13
6ES7 657- ...................................................................... 6/17
6ES7 658- ...................................................... 4/17, 6/9, 6/17
6ES7 671- ............................................................... 2/18, 4/8
6ES7 675- ........................................................................ 2/5
6ES7 676- ...................................................... 3/39, 3/53, 2/7
6ES7 677- ........................................................................ 2/4
6ES7 713- .............................................................. 4/19, 4/20
6ES7 790- ....... 3/10, 3/15, 3/19, 3/24, 3/29, 3/33, 4/20, 9/15
6ES7 791- ...................................................................... 4/20
6ES7 792- ............................................................. 4/12, 4/13
6ES7 798- ...................................................................... 4/20
6ES7 806- ........................................................................ 4/9
6ES7 810- ............................................................. 4/12, 4/13
6ES7 811- .................................................... 4/14, 4/15, 4/16
6ES7 820- ............................................................. 4/18, 7/15
6ES7 840- ...................................................................... 6/16
6ES7 864- ........................................................................ 5/5
6ES7 900- ........................ 3/10, 3/15, 3/19, 3/29, 3/33, 3/44,
................................................................... 3/49, 3/81, 4/20
6ES7 901- ............................................. 4/12, 4/13, 4/20, 6/7
6ES7 972- ...................................................... 4/12, 6/7, 6/13
6ES7 998- ......................... 4/12, 4/13, 4/14, 4/15, 4/16, 4/17
6ES7 648- ............... 3/10, 3/15, 3/19, 3/24, 3/29, 3/33, 3/72,
................................................. 3/75, 3/76, 3/78, 4/20, 9/14
6ES7 675- ......................................................................... 2/5
6ES7 676- ......................................................................... 2/7
10
10/15
Appendix
Order No. index
Type
Page
6FC
6FC5 235- ............................................. 2/8, 3/41, 3/44, 3/50
6FC5 247- ....................................................................... 5/11
6FC5 248- ....................................................................... 5/13
6GF
6GF6 2206GF6 5206GF6 7106GF6 980-
........................................................................ 9/8
............................................................. 9/17, 9/18
...................................................................... 9/14
...................................................................... 9/16
6GK
6GK1 1606GK1 1616GK1 1626GK1 5006GK1 5516GK1 5606GK1 5616GK1 5626GK1 7046GK1 7066GK1 7136GK1 7166GK1 7816GK1 7826GK1 9016GK1 7046GK5 2046GK5 4086GK5 4146GK5 7846GK5 7866GK5 7886GK5 791-
................................................................ 4/8, 7/4

.................................. 4/8, 6/7, 6/13, 7/5, 7/6, 7/9
....................................................... 6/13, 7/8, 7/9
........................ 7/20, 7/22, 7/26, 7/28, 7/30, 7/32
............................................ 4/12, 6/7, 6/13, 7/28
.............................................................. 4/8, 7/20
.......... 4/8, 4/12, 6/7, 6/13, 7/22, 7/24, 7/26, 7/30
..................................... 4/8, 4/12, 6/7, 6/13, 7/32
............... 4/12, 7/10, 7/11, 7/28, 7/30, 7/32, 7/33
................................................... 7/13, 7/15, 7/16
................................... 6/7, 7/20, 7/22, 7/24, 7/26
.................................................. 6/7, 7/6, 7/8, 7/9
..................................................................... 7/36
..................................................................... 7/36
................................................ 5/12, 7/4, 7/5, 7/8
..................................................................... 7/28
....................................................................... 7/4
....................................................................... 7/8
....................................................................... 7/8
..................................................................... 3/65
..................................................................... 3/65
..................................................................... 3/65
..................................................................... 3/65
6XV
6XV1 840- ........................................................ 5/12, 7/4, 7/5
6XV1 870- ........................................................ 5/12, 7/4, 7/5
10
10/16
Appendix
Notes
10
10/17
Appendix
Export regulations
Terms and Conditions of Sale and Delivery

By using this catalog you can acquire hardware and software
products described therein from Siemens AG subject to the
following terms. Please note! The scope, the quality and the conditions for supplies and services, including software products,
by any Siemens entity having a registered office outside of
Germany, shall be subject exclusively to the General Terms and
Conditions of the respective Siemens entity. The following terms
apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in Germany
The "General Terms of Payment" as well as the "General Conditions for the Supply of Products and Services of the Electrical
and Electronics Industry" shall apply.
For software products, the "General License Conditions for
Software Products for Automation and Drives for Customers
with a Seat or registered Office in Germany" shall apply.
For customers with a seat or registered office outside of
Germany
The "General Terms of Payment" as well as the "General Conditions for Supplies of Siemens, Automation and Drives for
Customers with a Seat or registered Office outside of Germany"
shall apply.
For software products, the "General License Conditions for
Software Products for Automation and Drives for Customers
with a Seat or registered Office outside of Germany" shall apply.
10
General
The dimensions are in mm. In Germany, according to the
German law on units in measuring technology, data in inches
only apply to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the corresponding pages,
especially with regard to data, dimensions and weights given
these are subject to change without prior notice.
The prices are in (Euro) ex works, exclusive packaging.
The sales tax (value added tax) is not included in the prices.
It shall be debited separately at the respective rate according to
the applicable legal regulations.
Prices are subject to change without prior notice. We will debit
the prices valid at the time of delivery.
Surcharges will be added to the prices of products that contain
silver, copper, aluminum, lead and/or gold if the respective basic
official prices for these metals are exceeded. These surcharges
will be determined based on the official price and the metal factor of the respective product.
The surcharge will be calculated on the basis of the official price
on the day prior to receipt of the order or prior to the release
order.
The metal factor determines the official price as of which the
metal surcharges are charged and the calculation method used.
The metal factor, provided it is relevant, is included with the price
information of the respective products.
An exact explanation of the metal factor and the text of the

Comprehensive Terms and Conditions of Sale and Delivery are
available free of charge from your local Siemens business office
under the following Order Nos.:
6ZB5310-0KR30-0BA1
(for customers based in Germany)
6ZB5310-0KS53-0BA1
(for customers based outside Germany)
or download them from the Internet
(Germany: A&D Mall Online-Help System)
Export regulations
The products listed in this catalog / price list may be subject to
European / German and/or US export regulations.
Therefore, any export requiring a license is subject to approval
by the competent authorities.
According to current provisions, the following export regulations
must be observed with respect to the products featured in this
catalog / price list:
AL
Number of the German Export List

Products marked other than "N" require an export
license.
In the case of software products, the export designations of the relevant data medium must also
be generally adhered to.
Goods labeled with an "AL" not equal to "N" are
subject to a European or German export authorization when being exported out of the EU.
ECCN
Export Control Classification Number

Products marked other than "N" are subject to a
reexport license to specific countries.
In the case of software products, the export
designations of the relevant data medium must
also be generally adhered to.
Goods labeled with an "ECCN" not equal to "N"
are subject to a US re-export authorization.
Even without a label or with an "AL: N" or "ECCN: N", authorization may be required due to the final destination and purpose for
which the goods are to be used.
The deciding factors are the AL or ECCN export authorization
indicated on order confirmations, delivery notes and invoices.
Errors excepted and subject to change without prior notice.
I IA/VuL_ohne MZ/En 05.09.06
7
10/18
Siemens AG 2009
Catalogs
Industry Automation, Drive Technologies and Electrical Installation Technology
Further information can be obtained from our branch offices listed
in the appendix or at www.siemens.com/automation/partner
Automation and Drives
Interactive catalog on DVD
Catalog
CA 01
Drive Systems
Variable-Speed Drives
Low-Voltage
Controls and Distribution
SIRIUS, SENTRON, SIVACON
Catalog
Controls and Distribution

Technical Information
SIRIUS, SENTRON, SIVACON
LV 1 T
SIDAC Reactors and Filters
LV 60
SIVENT Fans
LV 65
SIVACON 8PS Busbar Trunking Systems
LV 70
LV 1
SINAMICS G110/SINAMICS G120

Inverter Chassis Units
SINAMICS G120D
Distributed Frequency Inverters
D 11.1
SINAMICS G130 Drive Converter Chassis Units,

SINAMICS G150 Drive Converter Cabinet Units
D 11
SINAMICS GM150/SINAMICS SM150

Medium-Voltage Converters
D 12
SINAMICS S150 Drive Converter Cabinet Units
D 21.3
Asynchronous Motors Standardline
D 86.1
Synchronous Motors with Permanent-Magnet

Technology, HT-direct
D 86.2
PDF: Indicators for panel mounting
MP 12
DC Motors
DA 12
SIREC Recorders and Accessories
MP 20
SIMOREG DC MASTER 6RA70 Digital Chassis

Converters
DA 21.1
SIPART, Controllers and Software
MP 31
SIWAREX Weighing Systems
WT 01
SIMOREG K 6RA22 Analog Chassis Converters
DA 21.2
Continuous Weighing and Process Protection
WT 02
PDF: SIMOREG DC MASTER 6RM70 Digital Converter

Cabinet Units
DA 22
Process Analytical Instruments
PA 01
PDF: Process Analytics,

Components for the System Integration
PA 11
Process Instrumentation and Analytics

Field Instruments for Process Automation
Measuring Instruments for Pressure,
Differential Pressure, Flow, Level and Temperature,
Positioners and Liquid Meters
FI 01
SIMOVERT PM Modular Converter Systems
DA 45
SIEMOSYN Motors
DA 48
MICROMASTER 420/430/440 Inverters
DA 51.2
MICROMASTER 411/COMBIMASTER 411
DA 51.3
SIMOVERT MASTERDRIVES Vector Control
DA 65.10
SIMOVERT MASTERDRIVES Motion Control
DA 65.11
Synchronous and asynchronous servomotors for

SIMOVERT MASTERDRIVES
DA 65.3
SIMODRIVE 611 universal and POSMO
DA 65.4
SIMATIC Industrial Automation Systems

Products for Totally Integrated Automation and
Micro Automation
ST 70
D 81.1
SIMATIC PCS 7 Process Control System
ST PCS 7
MOTOX Geared Motors
D 87.1
Add-ons for the SIMATIC PCS 7

Process Control System
ST PCS 7.1
Automation Systems for Machine Tools SIMODRIVE
NC 60
Migration solutions with the SIMATIC PCS 7

Process Control System
ST PCS 7.2
Low-Voltage Three-Phase-Motors
IEC Squirrel-Cage Motors
Motors
Converter Systems SIMODRIVE 611/POSMO
SIMATIC HMI
Human Machine Interface Systems
ST 80
pc-based Automation
ST PC
NC 61
SIMATIC Control Systems
ST DA
SIMOTION, SINAMICS S120 and

Motors for Production Machines
PM 21
SIMATIC NET
IK PI
Drive and Control Components for Hoisting Equipment
HE 1
SIMATIC Sensors
Sensors for Factory Automation
FS 10
Systems Engineering
Power supplies SITOP power and LOGO! Power
KT 10.1
System cabling SIMATIC TOP connect
KT 10.2
Automation Systems for Machine Tools SINAMICS

Motors
Drive System SINAMICS S120
Mechanical Driving Machines

Flender Standard Couplings
MD 10.1
Electrical Installation Technology

PDF: ALPHA Distribution Boards and Terminal Blocks
ET A1
PDF: ALPHA 8HP Molded-Plastic Distribution System
ET A3
PDF: BETA Low-Voltage Circuit Protection
ET B1
PDF: DELTA Switches and Socket Outlets
ET D1
PDF: GAMMA Building Management Systems
ET G1
Motion Control
SINUMERIK & SIMODRIVE
Automation Systems for Machine Tools
NC 60
SINUMERIK & SINAMICS

Automation Systems for Machine Tools
NC 61
SIMOTION, SINAMICS S120 and

Motors for Production Machines
PM 21
System Solutions
Applications and Products for Industry are part of the
interactive catalog CA 01
TELEPERM M Process Control System

PDF: AS 488/TM automation systems
PLT 112
PDF: These catalogs are only available as pdf files.

IA DT ET/3U/En 03.12.08
Siemens AG 2009
Siemens AG
Industry Sector
Industrial Automation Systems
Postfach 48 48
90026 NRNBERG
GERMANY
www.siemens.com/automation
DRUCK_Umschlag_STPC_11_2008_en.i1 1
Subject to change without prior notice

Order No.: E86060-K4670-B101-B9-7600
3P.8101.72.02 / Dispo 07900
KG 0109 2.5 ROT 260 En
Printed in Germany
Siemens AG 2009
The information provided in this catalog contains descriptions or

characteristics of performance which in case of actual use do not
always apply as described or which may change as a result of
further development of the products. An obligation to provide the
respective characteristics shall only exist if expressly agreed in the
terms of contract. Availability and technical specifications are
subject to change without notice.
All product designations may be trademarks or product names of
Siemens AG or supplier companies whose use by third parties for
their own purposes could violate the rights of the owners.
21.01.2009 10:18:50

SIEMENS Embebido Cat

Uploaded by

Copyright:

Available Formats

SIEMENS Embebido Cat

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SIEMENS Embebido Cat

Uploaded by

Copyright:

Available Formats

Siemens AG 2009

Embedded and PC-based Automation

U2_neu_en_V2.fm Seite 1 Dienstag, 20. Januar 2009 5:47 17

Synchronous and Asynchronous

Inverters MICROMASTER 411

Automation and Drives

Innentitel.fm Seite 1 Donnerstag, 22. Januar 2009 4:19 16

Motion Control and Drives

Catalog ST PC November 2008

The products and

The products contained in this

Siemens ST PC November 2008

Answers for Industry.

Siemens Industry answers the challenges in the

Siemens offers automation, drive, and

The high quality of our products

Check out the opportunities our

Siemens ST PC November 2008

ERP Enterprise Resource Planning

MES Manufacturing Execution Systems

Industrial Software for

Siemens ST PC November 2008

SINAMICS Drive Systems

TIA is characterized by its unique

The unique continuity is already

Siemens ST PC November 2008

Integrated power distribution

Siemens ST PC November 2008

Products and systems

Planning and system configuration

Electrical power distribution in

Our portfolio comprises everything

Siemens ST PC November 2008

Technology with a future

Advantages of PC-based Automation

Siemens ST PC November 2008

Technology with a future

Variable-speed drives and servo motors feature the highest

Siemens Embedded Automation

SIMOTION D / SINAMICS / MICROMASTER

Siemens ST PC November 2008

Technology with a future

Temperature control: Hot runner technology for injection molding machines

The advantages of the Siemens PCbA solution

Measurement of foil thickness

Siemens ST PC November 2008

The advantages of the Siemens PCbA solution

Technology with a future

PC based control of varnishing lines for automobile plastic parts

The advantages of the Siemens PCbA solution

Modular Embedded Automation

With the EM PC expansion module you can easily connect a local

The system concept

Siemens ST PC November 2008

Technology with a future

The advantages of the Siemens PC-based solution

Siemens ST PC November 2008

The advantages of the Siemens PC-based solution

Technology with a future

PC-based control in automobile test bays