Falling Ladder Paradox

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

The Falling Ladder Paradox

Paul Scholten, Miami University, Oxford, OH 45056


Andrew Simoson, King College, Bristol, TN 37620
The College Mathematics Journal, January 1996, Volume 27, Number 1, pp. 4954

nyone who has studied calculus has probably solved the classic falling ladder
problem of related rates fame:

A ladder L feet long leans against a vertical wall. If the base of the ladder is moved
outwards at the constant rate of k feet per second, how fast is the tip of the ladder
moving downward?

The standard solution model for this problem is to assume that the tip of the ladder slips
downward, maintaining contact with the wall until impact at ground level, so that if the
base and tip of the ladder at any time t have coordinates !x!t", 0" and

Figure 1. The standard falling ladder model.

!0, y!t"", respectively, the Pythagorean theorem gives x2 $ y2 " L2; see Figure 1.
Differentiating with respect to time t yields the formula
y! "

#kx
.
y

(1)

The paradox in this solution is that as the ladder nears the ground, y! attains astronomical
proportions. In fact, in [5] the student is lightheartedly asked to find (for a particular k
and L) at what height y the ladders tip is moving at light speed.
Of course, the resolution of this paradox is that the ladders tip leaves the wall at some
point in its descent. A few classroom experiments using a yardstick lend observational
support for this explanation, for as the base of a stick or ladder is moved away from the
wall at constant speed, at the moment of impact it appears as if the tip lands some small
distance from the wall, although the action transpires so quickly and catastrophically
that it is hard to be certain about what happens. A paper [2] in the physics literature
points out the flaw of using (1) and demonstrates the correct model for the falling
ladder. Our approach is somewhat simpler, making no use of the force exerted by the
wall on the ladders tip; we furthermore show how to numerically plot the path of the
ladders tip, from the time it leaves the wall until its crash landing.

Lets determine yc, the critical height at which the ladder leaves the wall and (1) ceases
to be valid. We will do this by examining the differential equations governing these two
different physical situations: the moving ladder supported by the wall and the
unsupported ladder behaving as a stick pendulum.1
For the pendulum, recall that the rotational version of Newtons second law of motion
states that if a rigid body rotates in a plane about an axis that moves with uniform
velocity, then the total torque exerted by all the external forces on the body equals the
product of the moment of inertia and the angular acceleration, where the torque and the
moment of inertia are computed with respect to this moving axis. We apply this
principle for the axis which passes through the point of contact (the pivot) of the ladder
with the ground and which is perpendicular to the plane in which the ladder falls, since
this pivot moves with constant velocity.
The only forces on the freely falling ladder are the upward force from the ground at the
pivot point, which produces no torque, and the gravitational force, which produces the
same torque ' as a force of magnitude mg acting downward at the center of mass of the
ladder, as indicated in Figure 2. That is,

' " mg

L cos %
,
2

a positive value since this torque is counterclockwise. Finding the moment of inertia
I of a uniform rod with mass m and length L about its endpoint is a standard exercise in
calculus or physics, namely,
I"

x2

m
1
dx " mL2.
L
3

..
The angular acceleration is simply #%, being the second derivative with respect to time
of the angle & # % between the ground and the ladder,
counterclockwise.
.. measured
1
1
Thus Newtons law for the falling ladder is 3mL2!#% " " 2mgL cos %, or

%!! " #

3g
cos %,
2L

(2)

which is valid after the ladder loses contact with the wall.

Figure 2. A straight stick pendulum of length L.


1

Some texts presents an alternative falling ladder problem in which an unfortunate fellow clings
to the top of a ladder. Such a problem can be modeled by the motion of a standard pendulum, by
neglecting the mass of the (lightweight) ladder and taking the mass of the pendulum to be the
mass of the man. This analysis would be a suitable project for students.
2

On the other hand, when the ladder is in contact with the wall, y " L sin % and
differentiation yields y! " L cos %%! " x%!. By equation (1)

%! " #

k
,
L sin %

(3)

and another differentiation yields

%!! "

k cos % !
k2 cos %
%
"
#
,
L sin2 %
L2 sin3 %

(4)

which is valid while the ladder maintains contact with the wall.
Given specific values of L and k, we can determine the critical angle %c at which the
ladder loses contact with the wall by finding the point of intersection of the graphs of
!!
(2) and (4), plotting % versus %. Figure 3 (page 52) illustrates this idea using the values
L " 41 ft, k " 10 ft/s, g " 32 ft/s2, from [1]. From the graph we see that as % decreases
the ladder falls according to equation (4) until the two curves meet at %c & 0.38, the
critical angle, and thereafter the ladder falls according to equation (2). That is, up until
the critical angle the ladder is held up by the wall, but after %c it is free to behave as a
stick pendulum.

Figure 3. The transition between sliding and swinging.


Leaving L and k as parameters, we equate the right sides of (2) and (4), then simplify,
yielding
sin3%c "

2k2
.
3gL

(5)

3
If 2k2%!3gL" 1, that is, if k $ 2gL, equation (5) is impossible, and we conclude
that the tip of the ladder pulls away from the wall immediately when the bottom begins
to move away with speed k. Otherwise, since yc " L sin %c,

yc "

$
3

2k2L2
3g

(6)

It is interesting to find c, the acceleration of the tip of the ladder at the critical height.
Differentiating (1) and simplifying yields " # !k2L2"%y3, which is valid while the
ladder stays in contact with the wall. By (6), then, the acceleration at the moment of
separation is

!!
yc

3
" # g.
2

(7)

To find the path of the ladders tip after it leaves the wall, first observe that at the
moment of separation the base is at xc " L cos %c. Since the base moves away at
constant speed k, its distance from the wall t seconds later will be xc $ kt, so the
distance from the wall to the upper end of the ladder will be d " xc $ kt # L cos %
at this time. Thus, if we solve the differential equation (2) to find %!t", the path of the
ladders tip will be given by the parametric equations
d(t) " xc $ kt # L cos %!t",

(8)

y(t) " L sin %!t".


Figure 4 shows the trajectory generated by Mathematica, which numerically solves (2)
and plots the parametric curve, with L " 41 ft, k " 10 ft%s, g " 32 ft%s2. The initial
values are

%!0" " %c " arcsin


%! !0" "%!c "#

$
3

2k2
& 0.379428,
3gL

k
& #0.658503,
L sin %c

from (5), and


from (3).

Figure 4. The path of the ladders tip.


Note that yc " L sin %c & 15.19 ft in this example. The solution is computed as long as
%!t" 0, which turns out to be about 0.42 second, and at this moment of impact the
distance of the tip of the ladder from the wall is d & 1.32 ft.
To contrast these results with a typical textbook solution, consider the problem in [1],
where the student is asked to find y! at the instant when y " 9 ft, with L and k as before.
Since the ladder separates from the wall when y " yc & 15.19 ft, we can use
Mathematicas numerically generated solution of the differential equation (2) to find
the correct value y! & #35.49 ft%s when y " 9, rather than the value of #44.44 as
given by (1).
4

So what should be the status of the falling ladder problem in introductory calculus texts?
Here are a few possibilities:
Remove such problems from the textbooks [4].
Instead of asking for y! , ask for x! for a ladder falling under the force of gravity, with
no friction at either end. But this is a classic mechanics problem, probably best left for
a physics course.
3
Leave the problems in the text, but ensure that the exercises have k $2gL and ask
for y! when y is larger than the yc of (6), so that the standard approach rings true
physically. Mention as a marginal note that the standard model breaks down once
y < yc or if k $32gL .

An interesting variant that avoids the separation pathology has a 15-foot ladder sliding
down a wall while its base slides at 4 ft%s across a 9-foot-wide alley, bounded on the
other side by another wall [3]. Equation (1) faithfully models this situation, and would
do so up to an alley width of 14.4 feet.
Acknowledgements. The second author gratefully acknowledges a grant from the Michael
and Margaretha Sattler Foundation for a copy of Mathematica, the use of which provides
one with an extra measure of hopeful expectations in the exploration of problems like the
one discussed in this paper.

References
1. C. H. Edwards and D. Penney, Calculus with Analytic Geometry, Prentice Hall,
Englewood Cliffs, NJ, 1994, exercise 45, p. 171.
2. M. Freeman and P. Palffy-Muhoray, On mathematical and physical ladders, American
Journal of Physics 53:3 (1985) 276277.
3. P. Gillett, Calculus and Analytic Geometry, Heath, Lexington, MA, 1984,
pp. 194195.
4. D. Hughes-Hallett et al., Calculus, Wiley, New York, 1994.
5. G. Strang, Calculus, Wellesley Cambridge Press, Wellesley, MA, 1991, p. 164.

You might also like