www.jntuworld.

com

www.android.jntuworld.com

www.jwjobs.net

Code No: 57012

Set No. 1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B.Tech. I Sem., I Mid-Term Examinations, August - 2013
SWITCH GEAR AND PROTECTION
Objective Exam
Name: ______________________________ Hall Ticket No.
A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
I.

Choose the correct alternative:

1.

Under normal condition the circuit breaker contacts will be

A. opened
B. closed
C. Both A&B
D. A OR B

2.

The resultant transient voltage which appears across the breaker contacts at instant of arc extinction
is known as:
[
]
A. Recovery voltage B. Re striking voltage C. Peak voltage
D. All of the above

3.

The RRRV is given by:

A. dv/dt=vm/ (LC) 1/2 sin(t/(LC) 1/2 )
C. dv/dt=vm/(LC)1/2cos(t/(LC)1/2 )

4.

Under abnormal condition the circuit breaker contacts will be

A. opened B. closed C. Both A&B D. A OR B

5.

Current chopping mainly occurs in

A. Ai blast circuit breaker
B .Oil CB

6.

D
L

[
B. dv/dt=vm/(LC)1/2sin((LC)1/2/t)
D. dv/dt=vm/(LC)1/2sin(t/(L)1/2

R
O

W
U

T
N

C. Vacuum C.B

Merez price protection is used to protect

A. Transmission lines &T/F B. Motors only

C. T/F & generators

[
]
D. Any one of the above
[

D.T/F only

7.

For the interruption of high voltage and low current the C.B preferred is
A. Air blast c b B. Oil c b
C. Vacuum c b
D. All of the above

8.

Impedance relay can be used for

A. Earth fault relay B .phase fault relay only

9.

10.

A Mho relay is used to protect

A. Long transmission line
C. Short transmission line

C .Both A&B D. None of the above

B. Medium transmission line

D. All of the above

Merz price current protection is also called

A. protection B. over current protection C. Differential protection

[
]
D. Distance protection

Cont..2
www.jntuworld.com

www.jntuworld.com

www.android.jntuworld.com

Code No: 57012

:2:

www.jwjobs.net

Set No. 1

II

Fill in the Blanks:

11.

The high resistance of arc interruption method can be employed for------------------------------------

12.

The main drawback of the bulk oil circuit breaker is----------------------------------------------

13.

Air blast C.B are suitable for operating voltages of----------------------------------------

14.

The advantages of air blast C.B over oil C.B are-----------------------------------------------

15.

The dielectric strength of SF6 C.B is------------------------------------------------------

16.

The torque equation of the electromagnetic reactance relay is given by------------------------------------

17.

The reactance relay characteristic on the R-X-diagram is a --------------------------------------------

18.

The induction disc type relay is used for--------------------------------------------------------

19.

The thermal relays are used for------------------------------

20.

The percentage differential protection is used for -------------------------------------------------------

D
L

R
O

W
U

T
N

-oOo-

www.jntuworld.com

www.jntuworld.com

www.android.jntuworld.com

www.jwjobs.net

Code No: 57012

Set No. 2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B.Tech. I Sem., I Mid-Term Examinations, August - 2013
SWITCH GEAR AND PROTECTION
Objective Exam
Name: ______________________________ Hall Ticket No.
A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
I.

Choose the correct alternative:

1.

Under abnormal condition the circuit breaker contacts will be

A. opened B. closed C. Both A&B D. A OR B

2.

Current chopping mainly occurs in

A. Ai blast circuit breaker
B .Oil CB

3.

C. Vacuum C.B

Merez price protection is used to protect

A. Transmission lines &T/F B. Motors only

[
]
D. Any one of the above

D
L

C. T/F & generators

D.T/F only

R
O

4.

For the interruption of high voltage and low current the C.B preferred is
A. Air blast c b B. Oil c b
C. Vacuum c b
D. All of the above

5.

Impedance relay can be used for

A. Earth fault relay B .phase fault relay only

6.

A Mho relay is used to protect

A. Long transmission line
C. Short transmission line

T
N

W
U

C .Both A&B D. None of the above

B. Medium transmission line

D. All of the above

7.

Merz price current protection is also called

A. protection B. over current protection C. Differential protection

8.

Under normal condition the circuit breaker contacts will be

A. opened
B. closed
C. Both A&B
D. A OR B

9.

The resultant transient voltage which appears across the breaker contacts at instant of arc extinction
is known as:
[
]
A. Recovery voltage B. Re striking voltage C. Peak voltage
D. All of the above

10.

The RRRV is given by:

A. dv/dt=vm/ (LC) 1/2 sin(t/(LC) 1/2 )
C. dv/dt=vm/(LC)1/2cos(t/(LC)1/2 )

[
]
D. Distance protection
[

[
B. dv/dt=vm/(LC) sin((LC) /t)
D. dv/dt=vm/(LC)1/2sin(t/(L)1/2
1/2

1/2

Cont..2

www.jntuworld.com

www.jntuworld.com

www.android.jntuworld.com

Code No: 57012

www.jwjobs.net

:2:

Set No. 2

II

Fill in the Blanks:

11.

The advantages of air blast C.B over oil C.B are-----------------------------------------------

12.

The dielectric strength of SF6 C.B is------------------------------------------------------

13.

The torque equation of the electromagnetic reactance relay is given by------------------------------------

14.

The reactance relay characteristic on the R-X-diagram is a --------------------------------------------

15.

The induction disc type relay is used for--------------------------------------------------------

16.

The thermal relays are used for------------------------------

17.

The percentage differential protection is used for -------------------------------------------------------

18.

The high resistance of arc interruption method can be employed for------------------------------------

19.

The main drawback of the bulk oil circuit breaker is----------------------------------------------

20.

Air blast C.B are suitable for operating voltages of----------------------------------------

R
O

D
L

W
U

T
N

-oOo-

www.jntuworld.com

www.jntuworld.com

www.android.jntuworld.com

www.jwjobs.net

Code No: 57012

Set No. 3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B.Tech. I Sem., I Mid-Term Examinations, August - 2013
SWITCH GEAR AND PROTECTION
Objective Exam
Name: ______________________________ Hall Ticket No.
A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
I.

Choose the correct alternative:

1.

Merez price protection is used to protect

A. Transmission lines &T/F B. Motors only

C. T/F & generators

D.T/F only

2.

For the interruption of high voltage and low current the C.B preferred is
A. Air blast c b B. Oil c b
C. Vacuum c b
D. All of the above

3.

Impedance relay can be used for

A. Earth fault relay B .phase fault relay only

4.

A Mho relay is used to protect

A. Long transmission line
C. Short transmission line

D
L

C .Both A&B D. None of the above

R
O

B. Medium transmission line

D. All of the above

W
U

5.

Merz price current protection is also called

A. protection B. over current protection C. Differential protection

6.

Under normal condition the circuit breaker contacts will be

A. opened
B. closed
C. Both A&B
D. A OR B

7.

The resultant transient voltage which appears across the breaker contacts at instant of arc extinction
is known as:
[
]
A. Recovery voltage B. Re striking voltage C. Peak voltage
D. All of the above

8.

The RRRV is given by:

A. dv/dt=vm/ (LC) 1/2 sin(t/(LC) 1/2 )
C. dv/dt=vm/(LC)1/2cos(t/(LC)1/2 )

9.

Under abnormal condition the circuit breaker contacts will be

A. opened B. closed C. Both A&B D. A OR B

10.

Current chopping mainly occurs in

A. Ai blast circuit breaker
B .Oil CB

T
N

[
]
D. Distance protection
[

[
B. dv/dt=vm/(LC)1/2sin((LC)1/2/t)
D. dv/dt=vm/(LC)1/2sin(t/(L)1/2

C. Vacuum C.B

[
]
D. Any one of the above

Cont..2

www.jntuworld.com

www.jntuworld.com

www.android.jntuworld.com

Code No: 57012

:2:

www.jwjobs.net

Set No. 3

II

Fill in the Blanks:

11.

The torque equation of the electromagnetic reactance relay is given by------------------------------------

12.

The reactance relay characteristic on the R-X-diagram is a --------------------------------------------

13.

The induction disc type relay is used for--------------------------------------------------------

14.

The thermal relays are used for------------------------------

15.

The percentage differential protection is used for -------------------------------------------------------

16.

The high resistance of arc interruption method can be employed for------------------------------------

17.

The main drawback of the bulk oil circuit breaker is----------------------------------------------

18.

Air blast C.B are suitable for operating voltages of----------------------------------------

19.

The advantages of air blast C.B over oil C.B are-----------------------------------------------

20.

The dielectric strength of SF6 C.B is------------------------------------------------------

D
L

R
O

W
U

T
N

-oOo-

www.jntuworld.com

www.jntuworld.com

www.android.jntuworld.com

www.jwjobs.net

Code No: 57012

Set No. 4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B.Tech. I Sem., I Mid-Term Examinations, August - 2013
SWITCH GEAR AND PROTECTION
Objective Exam
Name: ______________________________ Hall Ticket No.
A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
I.

Choose the correct alternative:

1.

Impedance relay can be used for

A. Earth fault relay B .phase fault relay only

2.

A Mho relay is used to protect

A. Long transmission line
C. Short transmission line

C .Both A&B D. None of the above

B. Medium transmission line

D. All of the above

D
L

3.

Merz price current protection is also called

A. protection B. over current protection C. Differential protection

4.

Under normal condition the circuit breaker contacts will be

A. opened
B. closed
C. Both A&B
D. A OR B

5.

The resultant transient voltage which appears across the breaker contacts at instant of arc extinction
is known as:
[
]
A. Recovery voltage B. Re striking voltage C. Peak voltage
D. All of the above

6.

The RRRV is given by:

A. dv/dt=vm/ (LC) 1/2 sin(t/(LC) 1/2 )
C. dv/dt=vm/(LC)1/2cos(t/(LC)1/2 )

R
O

W
U

T
N

Under abnormal condition the circuit breaker contacts will be

A. opened B. closed C. Both A&B D. A OR B

8.

Current chopping mainly occurs in

A. Ai blast circuit breaker
B .Oil CB

10.

Merez price protection is used to protect

A. Transmission lines &T/F B. Motors only

[
B. dv/dt=vm/(LC) sin((LC) /t)
D. dv/dt=vm/(LC)1/2sin(t/(L)1/2

7.

9.

[
]
D. Distance protection

C. Vacuum C.B

C. T/F & generators

1/2

1/2

[
]
D. Any one of the above
[

D.T/F only

For the interruption of high voltage and low current the C.B preferred is
A. Air blast c b B. Oil c b
C. Vacuum c b
D. All of the above

Cont..2
www.jntuworld.com

www.jntuworld.com

www.android.jntuworld.com

Code No: 57012

:2:

www.jwjobs.net

Set No. 4

II

Fill in the Blanks:

11.

The induction disc type relay is used for--------------------------------------------------------

12.

The thermal relays are used for------------------------------

13.

The percentage differential protection is used for -------------------------------------------------------

14.

The high resistance of arc interruption method can be employed for------------------------------------

15.

The main drawback of the bulk oil circuit breaker is----------------------------------------------

16.

Air blast C.B are suitable for operating voltages of----------------------------------------

17.

The advantages of air blast C.B over oil C.B are-----------------------------------------------

18.

The dielectric strength of SF6 C.B is------------------------------------------------------

19.

The torque equation of the electromagnetic reactance relay is given by------------------------------------

20.

The reactance relay characteristic on the R-X-diagram is a --------------------------------------------

D
L

R
O

W
U

T
N

-oOo-

www.jntuworld.com