Scribd Logo
Upload

Welcome to Scribd!

  • 915 views

    Certificate 1

    Uploaded by

    Ravikant Pandey
    This report summarizes the inspection of an EOT crane at M/s Hardrock Fabrication Pvt. Ltd. The crane has a capacity of 5 tons, a maximum lift of 6 meters, and travels 30 meters. It is used inside the bucket section for loading and unloading. The inspection found the crane and all its components to be in good working order with no defects. No repairs were needed, but periodic maintenance was recommended. The crane was certified to be in safe working condition until the next inspection in 12.01.2015.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Certificate 1

    Uploaded by

    Ravikant Pandey
    915 views2 pages
    This report summarizes the inspection of an EOT crane at M/s Hardrock Fabrication Pvt. Ltd. The crane has a capacity of 5 tons, a maximum lift of 6 meters, and travels 30 meters. It is used inside the bucket section for loading and unloading. The inspection found the crane and all its components to be in good working order with no defects. No repairs were needed, but periodic maintenance was recommended. The crane was certified to be in safe working condition until the next inspection in 12.01.2015.

    Original Description:

    EOT crane testing by competent person. Sample Test Certificate. Applicable in INDIA.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This report summarizes the inspection of an EOT crane at M/s Hardrock Fabrication Pvt. Ltd. The crane has a capacity of 5 tons, a maximum lift of 6 meters, and travels 30 meters. It is used inside the bucket section for loading and unloading. The inspection found the crane and all its components to be in good working order with no defects. No repairs were needed, but periodic maintenance was recommended. The crane was certified to be in safe working condition until the next inspection in 12.01.2015.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    915 views2 pages

    Certificate 1

    Uploaded by

    Ravikant Pandey
    This report summarizes the inspection of an EOT crane at M/s Hardrock Fabrication Pvt. Ltd. The crane has a capacity of 5 tons, a maximum lift of 6 meters, and travels 30 meters. It is used inside the bucket section for loading and unloading. The inspection found the crane and all its components to be in good working order with no defects. No repairs were needed, but periodic maintenance was recommended. The crane was certified to be in safe working condition until the next inspection in 12.01.2015.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    REPORT OF EXAMINATION OF LIFTING MACHINES

    1. Name of Factory
    : M/s Hardrock Fabrication Pvt. Ltd.
    2. Location and Address of factory : A-33 & 34 (P) Phase-VI, Gamharia,
    Jamshedpur- 832108
    3. Distinctive No. & Description
    a) Ref No.
    B) Manufacturer

    HFPL/CR/01
    Strumech Pvt. Ltd

    C) Capacity

    5 Ton

    D) Type & Its mast

    EOT Crane with wire Rope and Hook

    E) Max. Lift

    6 Mts.

    F) Travel Length

    30 Mts.

    G) Location

    Inside Bucket Section.

    H) Nature of process in which this Loading/ unloading


    m/c is used
    buckets etc.
    I) Period of Installations
    1999
    J) Date of last test/ examination

    shifting

    of

    N.A

    K) Date of annealing/heat treatment N.A


    of chain/other lifting tackles
    4. What parts (if any) were in-accessible:- Some internal components were in
    accessible and so this EOT crane was examined in their external conditions as far as
    possible.
    5. What test/examination were made:- This EOT Crane was operated repeated in my
    presence for lifting the loads ranging from their max. Safe working loads to their normal
    operating loads. The operation of the EOT Crane was smooth and no mechanical
    discrepancies were observed. Physical conditions of all mechanical and electrical
    components were found in order including all safety systems. No defects affecting the
    state working of this EOT crane was observed. However periodical maintenance has to be
    carried out strictly.

    6. Condition of this machine (state any defects were observed materially affecting
    the safe working conditions of the machine: Good
    7. Are the fittings and appliances provided in accordance with the rules specified for
    the machine : Yes
    8. Are the fittings and appliances maintained in good conditions : Yes
    9. Repair (if any) required and period within which they should be executed and any
    conditions which the person making the inspection/examination thinks it necessary to
    specify for securing safe working without conditions: Since this EOT Crane was working
    without any problem and defects/discrepancies at the time of inspection/examination, no
    repairs were required on this EOT Crane.
    10. Where repairs affecting the safe working load/pressure are required, state the
    safe working load/pressure:
    (a) Before expiration of period specified in 13
    (b) After expiration of such period if the required repairs have not been completed.
    (c) After completion of required parts.
    11. Other Observation
    (a) This mentioned EOT Crane was inspected/examined in their condition as
    presented before me. If any alterations were made with respect to their
    parts/components and working conditions, a changed situation could be arrived to
    give rise discrepancies to the machines as well as to the working conditions. This
    report in such case would have no validity and the changed situation thus could not
    be compared with this inspection/examination nothings as stated above.
    (b) Routine maintenance as well as safe operation as recommended by O.E.M
    should be carried out and a log book should be maintained for the same.
    I certify that on 12.01.2014, this EOT Crane described above were thoroughly
    inspected and examined so far as their construction permitted and the
    test/examination as were necessary made on the day and that the above is the true
    report of my examination.
    Note: next due date- 12.01.2015

    You might also like