741989

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
1710 2170
X
88
0 8
set by hand or by optional RCU (Remote Control Unit)

XPol F-Panel 17102170 88 17dBi 08T
741 989
Type No.
Frequency range
Polarization
Gain
1710 1880 MHz
17102170
1850 1990 MHz
1920 2170 MHz
+45, 45
+45, 45
+45, 45
2 x 16.5 dBi
Half-power beam width

Copolar +45/ 45
Horizontal:
Vertical:
Electrical tilt
continuously adjustable
0 8
88
7
2 x 16.8 dBi
2 x 16.7 dBi
Horizontal: 88
Vertical:
6.7
Horizontal: 88
Vertical:
6.5
0 8
0 8
Vertical Pattern sidelobe

0 ... 2 ... 5 ... 8 T
0 ... 2 ... 5 ... 8 T
suppression for first sidelobe 18 ... 18 ... 16 .... 14 dB 20 ... 20 ... 18 ... 17 dB
above main beam
0 ... 2 ... 5 ... 8 T

18 ... 18 ... 18 ... 17 dB
Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector
0
60
Isolation, between ports
Copolar:
> 25 dB
Total power: > 25 dB
Copolar:
> 25 dB
Copolar:
> 24 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
Typically: 20 dB
> 10 dB
> 30 dB
> 30 dB
> 30 dB
Impedance
50
50
50
VSWR
< 1.5
< 1.5
< 1.5
Intermodulation IM3
(2 x 43 dBm carrier)
< 150 dBc
Max. power per input
300 W (at 50 C ambient temperature)
1710 1880 MHz: +45/ 45 Polarization

88
165
7
10
dB
dB
10
Horizontal Pattern
Vertical Pattern
0 8 electrical downtilt
1710 2170
45
1710 2170
+45
7-16
7-16
88
165
6.7
Mechanical specifications
Input
dB
dB
3
0
Horizontal Pattern
Vertical Pattern
Adjustment
mechanism
165
6.5
Max. wind velocity

10
Horizontal Pattern
Internet: http://www.kathrein.de
dB
10
Bottom
1x, Position bottom
continuously adjustable
Weight
Wind load
88
2 x 7-16 female
Connector position
dB
936.2073/i
Subject to alteration.
10
10
7.5 kg
Frontal:
Lateral:
Rearside:
130 N (at 150 km/h)

110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h
Packing size
1574 x 172 x 92 mm
Height/width/depth
1302 / 155 / 69 mm
Vertical Pattern
741 989
Page 1 of 3
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
F-Panels
Harmony of Design and Technology
Accessories (order separately)
Description
734 360
734 361
Material
2 clamps
Mast: 34 60 mm dia.
Stainless steel
60 g
2 clamps
Mast: 60 80 mm dia.
Stainless steel
70 g
734 362
2 clamps
Mast: 80 100 mm dia.
Stainless steel
80 g
734 363
2 clamps
Stainless steel
90 g
734 364
2 clamps
Stainless steel
110 g
734 365
2 clamps
Stainless steel
80 g
738 546
1 clamp
Hot-dip galvanized steel
1.0 kg
850 10002 1 clamp
2.7 kg
850 10003 1 clamp
4.8 kg
732 317
Downtilt angle: 0 10
Stainless steel
1.0 kg
1 downtilt kit
8.5
Weight Units per

approx. antenna
Remarks
1302
1356
1386
Type No.
64
35
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
Material:
Reflector screen: Tin plated copper. Radiator: Tin plated zinc.

Flat fiberglass radome: The max. radome depth is only 69 mm. Fiberglass material guarantees optimum performance with regards to stability,
stiffness, UV resistance and painting. The colour of the radome is grey.
All screws and nuts: Stainless steel.
Grounding:
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Environmental tests:
Kathrein antennas have passed environmental tests as recommended

in ETS 300 019-2-4. The homogenous design of Kathreins antenna
families use identical modules and materials. Extensive tests have been
performed on typical samples and modules.
Adjustment
mechanism
with integrated
scale
54
69
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
45
+45
155
Bottom view
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which
includes the static mechanical load imposed on an antenna by wind at maximum velocity.
Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by
oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground.
These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 3
741 989
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
936.2073/i
Please note:
General Instructions
for Adjustment Mechanism
Description of the adjustment mechanism (protective cap removed):
2
2
Adjustment wheel with twist-lock

function.
Downtilt spindle with integrated
scale.
Thread for fixing the protective

cap or the RCU (Remote Control
Unit).
Gearwheel for RCU power drive.
To set the downtilt angle exactly,

you must look horizontally at the
scale. The lower edge of the gearwheel must be used for alignment.
Manual adjustment procedure:
0 max.
max. 0
Remove the protective cap.
Set downtilt angle by rotating the

adjustment wheel.
Screw on the protective cap again.
936.2073/i
Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment:
For a description of RCU installation please refer to the respective data sheet.
741 989
Page 3 of 3

741989

Uploaded by

Copyright:

Available Formats

741989

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

741989

Uploaded by

Copyright:

Available Formats

Multi-band F-Panel

set by hand or by optional RCU (Remote Control Unit)

1710 1880 MHz

1920 2170 MHz

Half-power beam width

Vertical Pattern sidelobe

0 ... 2 ... 5 ... 8 T

Isolation, between ports

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization

1850 1990 MHz: +45/ 45 Polarization

1920 2170 MHz: +45/ 45 Polarization

Max. wind velocity

130 N (at 150 km/h)

Mast: 80 100 mm dia.

Mast: 100 120 mm dia.

Mast: 120 140 mm dia.

Mast: 45 125 mm dia.

Mast: 50 115 mm dia.

Hot-dip galvanized steel

850 10002 1 clamp

Mast: 110 220 mm dia.

Hot-dip galvanized steel

850 10003 1 clamp

Mast: 210 380 mm dia.

Hot-dip galvanized steel

Weight Units per

Reflector screen: Tin plated copper. Radiator: Tin plated zinc.

Kathrein antennas have passed environmental tests as recommended

Description of the adjustment mechanism (protective cap removed):

Adjustment wheel with twist-lock

Thread for fixing the protective

To set the downtilt angle exactly,

Manual adjustment procedure:

Remove the protective cap.

Set downtilt angle by rotating the

Screw on the protective cap again.

Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment:

You might also like