Scribd Logo
Upload

Welcome to Scribd!

  • 119 views

    (GSM) Mobile To Mobile Call Flow, Within Same MSC/BSC

    Uploaded by

    luvdembad
    The document describes the basic call flow process for a mobile-to-mobile call within the same MSC/BSC network. It involves 17 steps including the mobile devices sending service requests, the MSC routing the call and requesting subscriber information from the HLR, paging the receiving device, assigning voice channels, and finally connecting the call once answered. Key messages include service requests, send routing info requests, assignment requests, and connect messages to establish the call between the two mobile devices on the same network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    (GSM) Mobile To Mobile Call Flow, Within Same MSC/BSC

    Uploaded by

    luvdembad
    119 views2 pages
    The document describes the basic call flow process for a mobile-to-mobile call within the same MSC/BSC network. It involves 17 steps including the mobile devices sending service requests, the MSC routing the call and requesting subscriber information from the HLR, paging the receiving device, assigning voice channels, and finally connecting the call once answered. Key messages include service requests, send routing info requests, assignment requests, and connect messages to establish the call between the two mobile devices on the same network.

    Original Description:

    gsm2

    Original Title

    Gsm

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the basic call flow process for a mobile-to-mobile call within the same MSC/BSC network. It involves 17 steps including the mobile devices sending service requests, the MSC routing the call and requesting subscriber information from the HLR, paging the receiving device, assigning voice channels, and finally connecting the call once answered. Key messages include service requests, send routing info requests, assignment requests, and connect messages to establish the call between the two mobile devices on the same network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    119 views2 pages

    (GSM) Mobile To Mobile Call Flow, Within Same MSC/BSC

    Uploaded by

    luvdembad
    The document describes the basic call flow process for a mobile-to-mobile call within the same MSC/BSC network. It involves 17 steps including the mobile devices sending service requests, the MSC routing the call and requesting subscriber information from the HLR, paging the receiving device, assigning voice channels, and finally connecting the call once answered. Key messages include service requests, send routing info requests, assignment requests, and connect messages to establish the call between the two mobile devices on the same network.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    (GSM) Mobile to Mobile Call Flow, Within Same MSC/BSC

    Hi Friends,
    Here I tried to explain very basic call flow from mobile to mobile.
    To make it simple following assumptions have been taken. A) Call is in same MSC and BSC.
    B) No Authentication, C)No Ciphering , D) Messages on Ater and Air interface are not
    consider, etc.

    Call Flow Mesage Details:1. CM Service Request Message contains Global Cell Identity, Kind of Service
    required by subscriber e.g Voice, SMS, Fax, USSD. Mobile Identity e.g TMSI/IMSI.
    2. CM Service Accept Message is in reponse of CM Service Request.
    3. Set Up - Message contains dailed number from Mobile A (i.e Mob B number) and
    speech Codec.
    4. Send Routing Info-Request (SRI) - After analysis of dialed numbers received from
    A in set up message, MSC recognises its own MSISDN series and send SRI to HLR
    to get the Mobile station roaming number(MSRN). This messge contains B MSISDN,
    Interrogation type e.g Basic Call etc.
    5. Assignment Request - Message is to seize a channel for voice call for Mob A
    between MSC and BSC. Message contains Circuit Identification Code(CIC).
    6. Assignment Complete - Acceptance from BSC end that same CIC has been seized.
    7. Provide Roaming Number Request - HLR checks in its database to which VLR,
    Mob B is registered & ask for roaming number from that VLR. Message contains
    IMSI, MSISDN, VLR ID of Mob B.
    8. Provide Roaming Number Response - Message is response of roaming no. request
    and contains roaming number of Mob B. This message is for HLR. In this VLR
    checks its database & allocate one free MSRN from its MSRN pool for B number.
    9. Send Routing Info-Response - In this HLR forward same roaming number which it
    receives in above message to MSC.

    10. Paging Request - In this VLR checks the MSRN recieved from HLR & search which
    MSISDN is against that MSRN, now MSC checks the VLR database of that MSISDN
    to get the LAC & TMSI/IMSI of that MSISDN (Mob B) & initiates the paging
    request message to that particular LAC on the basis of TMSI/IMSI in that BSC. BSC
    now page to that LAC on the basis of IMSI/TMSI of Mob B. Message contains LAC,
    IMSI/TMSI, DPC of BSC.
    11. Paging Response - Mob B response to that paging with GCI (Global Cell Identity) to
    BSC that inturn forwarded to MSC.
    12. Assignment Request - Message is to seize a channel for voice call for Mob B
    between MSC and BSC. Message contains Circuit Identification Code(CIC).
    13. Assignment Complete - Acceptance from BSC end that same CIC has been seized.
    14. Set Up - It is used to display Mob A number on Mob B handset.
    15. Alert - This message indicates Mob A that Mob B is connected & its ringing. The
    Ring Back Tone is send from MSC to Mob A.
    16. Connect - Mob B answers the call & connect message from Mob B is send to MSC,
    inturn MSC sends connect message to Mob A indiacting that phone has been
    answered & connects those 2 voice channels which were seized during the assignment
    complete message.
    17. Connect Acknowledge - To acknowledge the connection.

    Read more at http://telecomtigers.blogspot.com/2009/10/gsm-mobile-to-mobile-call-flowwithin.html#HEuSEBUI1FXRZ8QU.99

    You might also like